ar71xx: Added support for TL-WA801NDv3

Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>

SVN-Revision: 48705

target/linux/ar71xx/base-files/etc/board.d/02_network

@@ -370,7 +370,8 @@ cap324)
 	ucidef_set_interface_lan "eth0" "dhcp"
 	;;
 
-arduino-yun | \
+arduino-yun |\
+tl-wa801nd-v3 |\
 dir-505-a1)
 	ucidef_set_interface_lan "eth1"
 	;;

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -824,6 +824,9 @@ ar71xx_board_detect() {
 	*"TL-WA801ND v2")
 		name="tl-wa801nd-v2"
 		;;
+	*"TL-WA801ND v3")
+		name="tl-wa801nd-v3"
+		;;
 	*TL-WA901ND)
 		name="tl-wa901nd"
 		;;

target/linux/ar71xx/config-4.1

@@ -134,6 +134,7 @@ CONFIG_ATH79_MACH_TL_MR3020=y
 CONFIG_ATH79_MACH_TL_MR3X20=y
 CONFIG_ATH79_MACH_TL_WA701ND_V2=y
 CONFIG_ATH79_MACH_TL_WA7210N_V2=y
+CONFIG_ATH79_MACH_TL_WA801ND_V3=y
 CONFIG_ATH79_MACH_TL_WA830RE_V2=y
 CONFIG_ATH79_MACH_TL_WA901ND=y
 CONFIG_ATH79_MACH_TL_WA901ND_V2=y

target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt

@@ -1090,7 +1090,14 @@ config ATH79_MACH_TL_WA7210N_V2
        select ATH79_DEV_GPIO_BUTTONS
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
-
+config ATH79_MACH_TL_WA801ND_V3
+       bool "TP-LINK TL-WA801ND v3 support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
 config ATH79_MACH_TL_WA830RE_V2
 	bool "TP-LINK TL-WA830RE v2 support"
 	select SOC_AR934X

target/linux/ar71xx/files/arch/mips/ath79/Makefile

@@ -143,6 +143,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WAX50RE)     += mach-tl-wax50re.o
 obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2)	+= mach-tl-wa701nd-v2.o
 obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2)	+= mach-tl-wa7210n-v2.o
 obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2)	+= mach-tl-wa830re-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WA801ND_V3)  += mach-tl-wa801nd-v3.o
 obj-$(CONFIG_ATH79_MACH_TL_WA901ND)	+= mach-tl-wa901nd.o
 obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2)	+= mach-tl-wa901nd-v2.o
 obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2)  += mach-tl-wdr3320-v2.o

target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c

@@ -0,0 +1,136 @@
+/*
+ *  TP-LINK TL-WA801ND v3 adapted from TP-LINK TL-WR841N/ND v9
+ *
+ *  Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
+ *  Copyright (C) 2016 Tiziano Bacocco <tizbac2@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WA801NDV3_GPIO_LED_WLAN	12
+#define TL_WA801NDV3_GPIO_LED_QSS	13
+#define TL_WA801NDV3_GPIO_LED_SECURITY_RED 11
+#define TL_WA801NDV3_GPIO_LED_SECURITY_GREEN 15
+#define TL_WA801NDV3_GPIO_LED_LAN 3
+
+#define TL_WA801NDV3_GPIO_BTN_RESET	2
+#define TL_WA801NDV3_GPIO_BTN_WIFI	1
+
+#define TL_WA801NDV3_KEYS_POLL_INTERVAL	20	/* msecs */
+#define TL_WA801NDV3_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA801NDV3_KEYS_POLL_INTERVAL)
+
+static const char *tl_wa801n_v3_part_probes[] = {
+	"tp-link",
+	NULL,
+};
+
+static struct flash_platform_data tl_wa801n_v3_flash_data = {
+	.part_probes	= tl_wa801n_v3_part_probes,
+};
+
+static struct gpio_led tl_wa801n_v3_leds_gpio[] __initdata = {
+  {
+		.name		= "tp-link:green:qss",
+		.gpio		= TL_WA801NDV3_GPIO_LED_QSS,
+		.active_low	= 1,
+	}, {
+		.name		= "tp-link:green:lan",
+		.gpio		= TL_WA801NDV3_GPIO_LED_LAN,
+		.active_low	= 1,
+	}, {
+		.name		= "tp-link:green:wlan",
+		.gpio		= TL_WA801NDV3_GPIO_LED_WLAN,
+		.active_low	= 1,
+	}, {
+		.name		= "tp-link:red:security",
+		.gpio		= TL_WA801NDV3_GPIO_LED_SECURITY_RED,
+		.active_low	= 0,
+	}, {
+		.name		= "tp-link:green:security",
+		.gpio		= TL_WA801NDV3_GPIO_LED_SECURITY_GREEN,
+		.active_low	= 0,
+	}
+
+};
+
+static struct gpio_keys_button tl_wa801n_v3_gpio_keys[] __initdata = {
+	{
+		.desc		= "Reset button",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = TL_WA801NDV3_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= TL_WA801NDV3_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "WIFI button",
+		.type		= EV_KEY,
+		.code		= KEY_RFKILL,
+		.debounce_interval = TL_WA801NDV3_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= TL_WA801NDV3_GPIO_BTN_WIFI,
+		.active_low	= 1,
+	}
+};
+
+
+static void __init tl_ap143_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+	u8 tmpmac[ETH_ALEN];
+
+	ath79_register_m25p80(&tl_wa801n_v3_flash_data);
+
+	ath79_setup_ar933x_phy4_switch(false, false);
+
+	ath79_register_mdio(0, 0x0);
+
+	/* LAN */
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+	ath79_eth1_data.duplex = DUPLEX_FULL;
+	ath79_switch_data.phy_poll_mask |= BIT(4);
+	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+	ath79_register_eth(1);
+
+	/* WAN */
+	ath79_switch_data.phy4_mii_en = 1;
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_data.speed = SPEED_100;
+	ath79_eth0_data.phy_mask = BIT(4);
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+	ath79_register_eth(0);
+
+	ath79_init_mac(tmpmac, mac, 0);
+	ath79_register_wmac(ee, tmpmac);
+}
+
+static void __init tl_wa801n_v3_setup(void)
+{
+	tl_ap143_setup();
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801n_v3_leds_gpio),
+				 tl_wa801n_v3_leds_gpio);
+
+	ath79_register_gpio_keys_polled(1, TL_WA801NDV3_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(tl_wa801n_v3_gpio_keys),
+					tl_wa801n_v3_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA801ND_V3, "TL-WA801ND-v3", "TP-LINK TL-WA801ND v3",
+	     tl_wa801n_v3_setup);

target/linux/ar71xx/files/arch/mips/ath79/machtypes.h

@@ -168,6 +168,7 @@ enum ath79_mach_type {
 	ATH79_MACH_TL_WA860RE,		/* TP-LINK TL-WA860RE */
 	ATH79_MACH_TL_WA801ND_V2,	/* TP-LINK TL-WA801ND v2 */
 	ATH79_MACH_TL_WA830RE_V2,	/* TP-LINK TL-WA830RE v2 */
+	ATH79_MACH_TL_WA801ND_V3,	/* TP-LINK TL-WA801ND v3 */
 	ATH79_MACH_TL_WA901ND,		/* TP-LINK TL-WA901ND */
 	ATH79_MACH_TL_WA901ND_V2,	/* TP-LINK TL-WA901ND v2 */
 	ATH79_MACH_TL_WA901ND_V3,	/* TP-LINK TL-WA901ND v3 */

target/linux/ar71xx/image/Makefile

@@ -986,6 +986,13 @@ define Device/tl-wa801nd-v2
     TPLINK_HWID := 0x08010002
 endef
 
+define Device/tl-wa801nd-v3
+    $(Device/tplink-4mlzma)
+    BOARDNAME := TL-WA801ND-v3
+    DEVICE_PROFILE := TLWA801
+    TPLINK_HWID := 0x08010003
+endef
+
 define Device/tl-wa830re-v1
     $(Device/tplink-4m)
     BOARDNAME := TL-WA901ND
@@ -1013,7 +1020,7 @@ define Device/tl-wa860re-v1
     DEVICE_PROFILE := TLWA860
     TPLINK_HWID := 0x08600001
 endef
-TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa860re-v1
+TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa860re-v1
 
 define Device/tl-wa901nd-v1
     $(Device/tplink-4m)

tools/firmware-utils/src/mktplinkfw.c

@@ -51,6 +51,7 @@
 #define HWID_TL_WA830RE_V1	0x08300010
 #define HWID_TL_WA830RE_V2	0x08300002
 #define HWID_TL_WA801ND_V2	0x08010002
+#define HWID_TL_WA801ND_V3	0x08010003
 #define HWID_TL_WA901ND_V1	0x09010001
 #define HWID_TL_WA901ND_V2	0x09010002
 #define HWID_TL_WDR4300_V1_IL	0x43008001
@@ -298,6 +299,11 @@ static struct board_info boards[] = {
 		.hw_id          = HWID_TL_WA801ND_V2,
 		.hw_rev         = 1,
 		.layout_id	= "4Mlzma",
+	},{
+		.id							= "TL-WA801NDv3",
+		.hw_id          = HWID_TL_WA801ND_V3,
+		.hw_rev         = 1,
+		.layout_id  = "4Mlzma",
 	}, {
 		.id		= "TL-WA901NDv1",
 		.hw_id		= HWID_TL_WA901ND_V1,
@@ -1219,4 +1225,3 @@ int main(int argc, char *argv[])
  out:
 	return ret;
 }
-