KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

lantiq: fix fritz7320 wifi support

Browse source 
Signed-off-by: John Crispin <john@phrozen.org>
This commit is contained in:
John Crispin 2016-06-13 21:50:13 +02:00
parent 98d00c35e3
commit d5666b98fa
4 changed files with 27 additions and 6 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
target/linux/lantiq/base-files/etc/board.d/01_leds
View file

@ -42,6 +42,9 @@ P2812HNUF*)
ARV7519RW22)
ucidef_set_led_netdev "lan" "lan" "arv7519rw22:green:lan" "eth0.1"
;;
FRITZ7320)
ucidef_set_led_netdev "wifi" "wifi" "fritz7320:green:wlan" "wlan0"
;;
WBMR300)
ucidef_set_led_switch "lan1" "LAN1" "wbmr300:green:lan1" "switch0" "0x08"
ucidef_set_led_switch "lan2" "LAN2" "wbmr300:green:lan2" "switch0" "0x04"

10
target/linux/lantiq/dts/FRITZ7320.dts
View file

@ -37,7 +37,7 @@
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
ath9k_cal: partition@0 {
label = "urlader";
reg = <0x00000 0x20000>;
read-only;
@ -63,6 +63,14 @@
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0x985>;
ath,device-id = /bits/ 16 <0xff1d 0x2d>;
ath,eep-endian;
ath,eep-swap;
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;

17
target/linux/lantiq/patches-4.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
View file

@ -30,7 +30,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+#endif /* _PCI_ATH_FIXUP */
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -104,5 +104,8 @@ int xrx200_gphy_boot(struct device *dev,
@@ -104,5 +104,8 @@
extern void ltq_pmu_enable(unsigned int module);
extern void ltq_pmu_disable(unsigned int module);
@ -41,7 +41,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
#endif /* _LTQ_XWAY_H__ */
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -2,4 +2,7 @@ obj-y := prom.o sysctrl.o clk.o reset.o
@@ -2,4 +2,7 @@
obj-y += vmmc.o tffs.o
@ -51,7 +51,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
--- /dev/null
+++ b/arch/mips/lantiq/xway/ath_eep.c
@@ -0,0 +1,298 @@
@@ -0,0 +1,307 @@
+/*
+ * Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
@ -104,6 +104,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ const __be32 *list;
+ const char *part;
+ phandle phandle;
+ u16 dev_ids[2] = { 0 };
+
+ if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
+ sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
@ -188,6 +189,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
+ }
+
+ if (!of_property_read_u16_array(np, "ath,device-id", dev_ids, 2)) {
+ struct pci_dev *d = NULL;
+
+ while ((d = pci_get_device(PCI_VENDOR_ID_ATHEROS,
+ dev_ids[0], d)) != NULL)
+ d->device = dev_ids[1];
+ }
+
+ if (!of_property_read_u32(np, "ath,led-pin", &led_pin)) {
+ ath9k_pdata.led_pin = led_pin;
+ dev_info(&pdev->dev, "using led pin %d.\n", led_pin);
@ -615,7 +624,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+device_initcall(of_ralink_eeprom_init);
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -840,7 +840,11 @@ ltq_etop_init(struct net_device *dev)
@@ -840,7 +840,11 @@
if (err)
goto err_hw;

3
target/linux/lantiq/xway/profiles/avm.mk
View file

@ -4,7 +4,8 @@ define Profile/FRITZ7320
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-deu-ar9 kmod-usb-dwc2
kmod-ltq-deu-ar9 kmod-usb-dwc2 \
kmod-ath9k wpad-mini
endef
$(eval $(call Profile,FRITZ7320))