ath79: add support for TP-Link TL-WDR4900 v2

Specification:
- SoC: Qualcomm Atheros QCA9558
- Flash: 8 MB
- RAM: 128 MB
- Ethernet: AR8327N with 5 GE ports.
- Wireless radio: QCA9558 for 2.4G and AR9580 for 5G.

Flash instruction:
  Upload the generated factory firmware on web interface.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
This commit is contained in:
Chuanhong Guo 2018-08-09 12:29:28 +08:00 committed by Mathias Kresin
parent 3493c1cf41
commit d4e3a31f6c
4 changed files with 245 additions and 2 deletions

View file

@ -69,7 +69,8 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "3:lan:1" "5:lan:2" "4:wan"
;;
tplink,archer-c7-v2)
tplink,archer-c7-v2|\
tplink,tl-wdr4900-v2)
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;

View file

@ -52,7 +52,8 @@ case "$FIRMWARE" in
;;
ocedo,raccoon|\
tplink,tl-wdr3600|\
tplink,tl-wdr4300)
tplink,tl-wdr4300|\
tplink,tl-wdr4900-v2)
ath9k_eeprom_extract "art" 20480 1088
;;
netgear,wnr612-v2|\

View file

@ -0,0 +1,232 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9557.dtsi"
/ {
compatible = "tplink,tl-wdr4900-v2", "qca,qca9558";
model = "TP-Link TL-WDR4900 v2";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-status = &led_system;
};
gpio_leds: leds {
compatible = "gpio-leds";
led_system: system {
label = "tp-link:blue:system";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
usb1 {
label = "tp-link:green:usb1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port1>;
linux,default-trigger = "usbport";
};
usb2 {
label = "tp-link:green:usb2";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
wlan2g {
label = "tp-link:blue:wlan2g";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
qss {
label = "tp-link:blue:qss";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan5g {
label = "tp-link:blue:wlan5g";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-export {
compatible = "gpio-export";
gpio_usb1_power {
gpio-export,name = "tp-link:power:usb1";
gpio-export,output = <1>;
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
gpio_usb2_power {
gpio-export,name = "tp-link:power:usb2";
gpio-export,output = <1>;
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
};
};
};
&pcie1 {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,0033";
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-2)>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&uart {
status = "okay";
};
&usb_phy0 {
status = "okay";
};
&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port0: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy1 {
status = "okay";
};
&usb1 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0x7d0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
0x50 0xc737c737 /* LED_CTRL0 */
0x54 0x00000000 /* LED_CTRL1 */
0x58 0x00000000 /* LED_CTRL2 */
0x5c 0x0030c300 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x0000007e /* PORT6 STATUS */
>;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
phy-handle = <&phy0>;
pll-data = <0x56000000 0x00000101 0x00001616>;
gmac-config {
device = <&gmac>;
rgmii-enabled = <1>;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
pll-data = <0x03000101 0x00000101 0x00001616>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};

View file

@ -49,6 +49,15 @@ define Device/tplink_tl-wdr4300
endef
TARGET_DEVICES += tplink_tl-wdr4300
define Device/tplink_tl-wdr4900-v2
$(Device/tplink-8mlzma)
ATH_SOC := qca9558
DEVICE_TITLE := TP-LINK TL-WDR4900 v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x49000002
endef
TARGET_DEVICES += tplink_tl-wdr4900-v2
define Device/tplink_tl-wr1043nd-v1
$(Device/tplink-8m)
ATH_SOC := ar9132