ar71xx: remove unused kernel versions, 2.6.36 should be the next target

SVN-Revision: 23571
2010-10-21 18:41:52 +00:00 · 2010-10-21 18:41:52 +00:00 · d40b0f3529
commit d40b0f3529
parent ad83152231
107 changed files with 0 additions and 3885 deletions
--- a/target/linux/ar71xx/config-2.6.33
+++ b/target/linux/ar71xx/config-2.6.33
@ -1,255 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_AG71XX=y
-CONFIG_AG71XX_AR8216_SUPPORT=y
-# CONFIG_AG71XX_DEBUG is not set
-# CONFIG_AG71XX_DEBUG_FS is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-CONFIG_AR71XX_DEV_AP91_PCI=y
-CONFIG_AR71XX_DEV_AP94_PCI=y
-CONFIG_AR71XX_DEV_AR913X_WMAC=y
-CONFIG_AR71XX_DEV_DSA=y
-CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
-CONFIG_AR71XX_DEV_LEDS_GPIO=y
-CONFIG_AR71XX_DEV_M25P80=y
-CONFIG_AR71XX_DEV_PB42_PCI=y
-CONFIG_AR71XX_DEV_PB9X_PCI=y
-CONFIG_AR71XX_DEV_USB=y
-CONFIG_AR71XX_MACH_AP81=y
-CONFIG_AR71XX_MACH_AP83=y
-CONFIG_AR71XX_MACH_AP96=y
-CONFIG_AR71XX_MACH_AW_NR580=y
-CONFIG_AR71XX_MACH_DIR_600_A1=y
-CONFIG_AR71XX_MACH_DIR_615_C1=y
-CONFIG_AR71XX_MACH_DIR_825_B1=y
-CONFIG_AR71XX_MACH_EAP7660D=y
-CONFIG_AR71XX_MACH_JWAP003=y
-CONFIG_AR71XX_MACH_MZK_W04NU=y
-CONFIG_AR71XX_MACH_MZK_W300NH=y
-CONFIG_AR71XX_MACH_NBG460N=y
-CONFIG_AR71XX_MACH_PB42=y
-CONFIG_AR71XX_MACH_PB44=y
-CONFIG_AR71XX_MACH_PB92=y
-CONFIG_AR71XX_MACH_RB4XX=y
-CONFIG_AR71XX_MACH_RB750=y
-CONFIG_AR71XX_MACH_TEW_632BRP=y
-CONFIG_AR71XX_MACH_TL_MR3420=y
-CONFIG_AR71XX_MACH_TL_WA901ND=y
-CONFIG_AR71XX_MACH_TL_WR1043ND=y
-CONFIG_AR71XX_MACH_TL_WR741ND=y
-CONFIG_AR71XX_MACH_TL_WR841N_V1=y
-CONFIG_AR71XX_MACH_TL_WR941ND=y
-CONFIG_AR71XX_MACH_UBNT=y
-CONFIG_AR71XX_MACH_WNDR3700=y
-CONFIG_AR71XX_MACH_WNR2000=y
-CONFIG_AR71XX_MACH_WP543=y
-CONFIG_AR71XX_MACH_WRT160NL=y
-CONFIG_AR71XX_MACH_WRT400N=y
-CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
-CONFIG_AR71XX_MACH_ZCN_1523H=y
-CONFIG_AR71XX_PCI_ATH9K_FIXUP=y
-CONFIG_AR71XX_NVRAM=y
-CONFIG_AR71XX_WDT=y
-CONFIG_AR8216_PHY=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATHEROS_AR71XX=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_NXP_74HC153=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../../root"
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_RB750 is not set
-# CONFIG_LEDS_WNDR3700_USB is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_M25PXX_USE_FAST_READ is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MICREL_PHY=y
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AR91XX_FLASH=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_WRT160NL_PARTS=y
-CONFIG_MYLOADER=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_AR7240=y
-CONFIG_NET_DSA_MV88E6060=y
-CONFIG_NET_DSA_MV88E6063=y
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-CONFIG_NET_DSA_TAG_QINQ=y
-CONFIG_NET_DSA_TAG_TRAILER=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-CONFIG_MARVELL_PHY=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SPI=y
-CONFIG_SPI_AP83=y
-CONFIG_SPI_AR71XX=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_PB44=y
-# CONFIG_SPI_RB4XX is not set
-# CONFIG_SPI_RB4XX_CPLD is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_VSC7385 is not set
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
--- a/target/linux/ar71xx/config-2.6.34
+++ b/target/linux/ar71xx/config-2.6.34
@ -1,256 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_AG71XX=y
-CONFIG_AG71XX_AR8216_SUPPORT=y
-# CONFIG_AG71XX_DEBUG is not set
-# CONFIG_AG71XX_DEBUG_FS is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-CONFIG_AR71XX_DEV_AP91_PCI=y
-CONFIG_AR71XX_DEV_AP94_PCI=y
-CONFIG_AR71XX_DEV_AR913X_WMAC=y
-CONFIG_AR71XX_DEV_DSA=y
-CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
-CONFIG_AR71XX_DEV_LEDS_GPIO=y
-CONFIG_AR71XX_DEV_M25P80=y
-CONFIG_AR71XX_DEV_PB42_PCI=y
-CONFIG_AR71XX_DEV_PB9X_PCI=y
-CONFIG_AR71XX_DEV_USB=y
-CONFIG_AR71XX_MACH_AP81=y
-CONFIG_AR71XX_MACH_AP83=y
-CONFIG_AR71XX_MACH_AP96=y
-CONFIG_AR71XX_MACH_AW_NR580=y
-CONFIG_AR71XX_MACH_DIR_600_A1=y
-CONFIG_AR71XX_MACH_DIR_615_C1=y
-CONFIG_AR71XX_MACH_DIR_825_B1=y
-CONFIG_AR71XX_MACH_EAP7660D=y
-CONFIG_AR71XX_MACH_JWAP003=y
-CONFIG_AR71XX_MACH_MZK_W04NU=y
-CONFIG_AR71XX_MACH_MZK_W300NH=y
-CONFIG_AR71XX_MACH_NBG460N=y
-CONFIG_AR71XX_MACH_PB42=y
-CONFIG_AR71XX_MACH_PB44=y
-CONFIG_AR71XX_MACH_PB92=y
-CONFIG_AR71XX_MACH_RB4XX=y
-CONFIG_AR71XX_MACH_RB750=y
-CONFIG_AR71XX_MACH_TEW_632BRP=y
-CONFIG_AR71XX_MACH_TL_MR3420=y
-CONFIG_AR71XX_MACH_TL_WA901ND=y
-CONFIG_AR71XX_MACH_TL_WR1043ND=y
-CONFIG_AR71XX_MACH_TL_WR741ND=y
-CONFIG_AR71XX_MACH_TL_WR841N_V1=y
-CONFIG_AR71XX_MACH_TL_WR941ND=y
-CONFIG_AR71XX_MACH_UBNT=y
-CONFIG_AR71XX_MACH_WNDR3700=y
-CONFIG_AR71XX_MACH_WNR2000=y
-CONFIG_AR71XX_MACH_WP543=y
-CONFIG_AR71XX_MACH_WRT160NL=y
-CONFIG_AR71XX_MACH_WRT400N=y
-CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
-CONFIG_AR71XX_MACH_ZCN_1523H=y
-CONFIG_AR71XX_NVRAM=y
-CONFIG_AR71XX_PCI_ATH9K_FIXUP=y
-CONFIG_AR71XX_WDT=y
-CONFIG_AR8216_PHY=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATHEROS_AR71XX=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_NXP_74HC153=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../../root"
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_RB750 is not set
-# CONFIG_LEDS_WNDR3700_USB is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_M25PXX_USE_FAST_READ is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MICREL_PHY=y
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AR91XX_FLASH=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_WRT160NL_PARTS=y
-CONFIG_MYLOADER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_AR7240=y
-CONFIG_NET_DSA_MV88E6060=y
-CONFIG_NET_DSA_MV88E6063=y
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-CONFIG_NET_DSA_TAG_QINQ=y
-CONFIG_NET_DSA_TAG_TRAILER=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-CONFIG_MARVELL_PHY=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SPI=y
-CONFIG_SPI_AP83=y
-CONFIG_SPI_AR71XX=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_PB44=y
-# CONFIG_SPI_RB4XX is not set
-# CONFIG_SPI_RB4XX_CPLD is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_VSC7385 is not set
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
--- a/target/linux/ar71xx/config-2.6.35
+++ b/target/linux/ar71xx/config-2.6.35
@ -1,256 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_AG71XX=y
-CONFIG_AG71XX_AR8216_SUPPORT=y
-# CONFIG_AG71XX_DEBUG is not set
-# CONFIG_AG71XX_DEBUG_FS is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-CONFIG_AR71XX_DEV_AP91_PCI=y
-CONFIG_AR71XX_DEV_AP94_PCI=y
-CONFIG_AR71XX_DEV_AR913X_WMAC=y
-CONFIG_AR71XX_DEV_DSA=y
-CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
-CONFIG_AR71XX_DEV_LEDS_GPIO=y
-CONFIG_AR71XX_DEV_M25P80=y
-CONFIG_AR71XX_DEV_PB42_PCI=y
-CONFIG_AR71XX_DEV_PB9X_PCI=y
-CONFIG_AR71XX_DEV_USB=y
-CONFIG_AR71XX_MACH_AP81=y
-CONFIG_AR71XX_MACH_AP83=y
-CONFIG_AR71XX_MACH_AP96=y
-CONFIG_AR71XX_MACH_AW_NR580=y
-CONFIG_AR71XX_MACH_DIR_600_A1=y
-CONFIG_AR71XX_MACH_DIR_615_C1=y
-CONFIG_AR71XX_MACH_DIR_825_B1=y
-CONFIG_AR71XX_MACH_EAP7660D=y
-CONFIG_AR71XX_MACH_JWAP003=y
-CONFIG_AR71XX_MACH_MZK_W04NU=y
-CONFIG_AR71XX_MACH_MZK_W300NH=y
-CONFIG_AR71XX_MACH_NBG460N=y
-CONFIG_AR71XX_MACH_PB42=y
-CONFIG_AR71XX_MACH_PB44=y
-CONFIG_AR71XX_MACH_PB92=y
-CONFIG_AR71XX_MACH_RB4XX=y
-CONFIG_AR71XX_MACH_RB750=y
-CONFIG_AR71XX_MACH_TEW_632BRP=y
-CONFIG_AR71XX_MACH_TL_MR3420=y
-CONFIG_AR71XX_MACH_TL_WA901ND=y
-CONFIG_AR71XX_MACH_TL_WR1043ND=y
-CONFIG_AR71XX_MACH_TL_WR741ND=y
-CONFIG_AR71XX_MACH_TL_WR841N_V1=y
-CONFIG_AR71XX_MACH_TL_WR941ND=y
-CONFIG_AR71XX_MACH_UBNT=y
-CONFIG_AR71XX_MACH_WNDR3700=y
-CONFIG_AR71XX_MACH_WNR2000=y
-CONFIG_AR71XX_MACH_WP543=y
-CONFIG_AR71XX_MACH_WRT160NL=y
-CONFIG_AR71XX_MACH_WRT400N=y
-CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
-CONFIG_AR71XX_MACH_ZCN_1523H=y
-CONFIG_AR71XX_NVRAM=y
-CONFIG_AR71XX_PCI_ATH9K_FIXUP=y
-CONFIG_AR71XX_WDT=y
-CONFIG_AR8216_PHY=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATHEROS_AR71XX=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_NXP_74HC153=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../../root"
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_RB750 is not set
-# CONFIG_LEDS_WNDR3700_USB is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_M25PXX_USE_FAST_READ is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MICREL_PHY=y
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AR91XX_FLASH=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_WRT160NL_PARTS=y
-CONFIG_MYLOADER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_AR7240=y
-CONFIG_NET_DSA_MV88E6060=y
-CONFIG_NET_DSA_MV88E6063=y
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-CONFIG_NET_DSA_TAG_QINQ=y
-CONFIG_NET_DSA_TAG_TRAILER=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-CONFIG_MARVELL_PHY=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SPI=y
-CONFIG_SPI_AP83=y
-CONFIG_SPI_AR71XX=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_PB44=y
-# CONFIG_SPI_RB4XX is not set
-# CONFIG_SPI_RB4XX_CPLD is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_VSC7385 is not set
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
--- a/target/linux/ar71xx/patches-2.6.33/001-ar71xx_core.patch
+++ b/target/linux/ar71xx/patches-2.6.33/001-ar71xx_core.patch
@ -1,50 +0,0 @@
--- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -168,6 +168,13 @@ ifeq (,$(findstring march=octeon, $(cfla
- cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
- endif
- 
-+#
-+# Atheros AR71xx
-+#
-+core-$(CONFIG_ATHEROS_AR71XX)	+= arch/mips/ar71xx/
-+cflags-$(CONFIG_ATHEROS_AR71XX)	+= -I$(srctree)/arch/mips/include/asm/mach-ar71xx
-+load-$(CONFIG_ATHEROS_AR71XX)	+= 0xffffffff80060000
-+
- cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
- cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
- cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
--- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -48,6 +48,23 @@ config AR7
- 	  Support for the Texas Instruments AR7 System-on-a-Chip
- 	  family: TNETD7100, 7200 and 7300.
- 
-+config ATHEROS_AR71XX
-+	bool "Atheros AR71xx based boards"
-+	select CEVT_R4K
-+	select CSRC_R4K
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select ARCH_REQUIRE_GPIOLIB
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_HAS_CPU_MIPS32_R2
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_HAS_EARLY_PRINTK
-+	select MIPS_MACHINE
-+	help
-+	  Support for Atheros AR71xx based boards.
-+
- config BCM47XX
- 	bool "BCM47XX based boards"
- 	select CEVT_R4K
-@@ -682,6 +699,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
- endchoice
- 
- source "arch/mips/alchemy/Kconfig"
-+source "arch/mips/ar71xx/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
- source "arch/mips/lasat/Kconfig"
--- a/target/linux/ar71xx/patches-2.6.33/002-ar71xx_pci.patch
+++ b/target/linux/ar71xx/patches-2.6.33/002-ar71xx_pci.patch
@ -1,10 +0,0 @@
--- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
- obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
- 					ops-bcm63xx.o
-+obj-$(CONFIG_ATHEROS_AR71XX)	+= pci-ar71xx.o pci-ar724x.o
- 
- #
- # These are still pretty much in the old state, watch, go blind.
--- a/target/linux/ar71xx/patches-2.6.33/003-ar71xx_usb_host.patch
+++ b/target/linux/ar71xx/patches-2.6.33/003-ar71xx_usb_host.patch
@ -1,58 +0,0 @@
--- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -109,6 +109,13 @@ config XPS_USB_HCD_XILINX
- 		support both high speed and full speed devices, or high speed
- 		devices only.
- 
-+config USB_EHCI_AR71XX
-+	bool "USB EHCI support for AR71xx"
-+	depends on USB_EHCI_HCD && ATHEROS_AR71XX
-+	default y
-+	help
-+	  Support for Atheros AR71xx built-in EHCI controller
-+
- config USB_EHCI_FSL
- 	bool "Support for Freescale on-chip EHCI USB controller"
- 	depends on USB_EHCI_HCD && FSL_SOC
-@@ -207,6 +214,13 @@ config USB_OHCI_HCD
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called ohci-hcd.
- 
-+config USB_OHCI_AR71XX
-+	bool "USB OHCI support for Atheros AR71xx"
-+	depends on USB_OHCI_HCD && ATHEROS_AR71XX
-+	default y
-+	help
-+	  Support for Atheros AR71xx built-in OHCI controller
-+
- config USB_OHCI_HCD_PPC_SOC
- 	bool "OHCI support for on-chip PPC USB controller"
- 	depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
--- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1159,6 +1159,11 @@ MODULE_LICENSE ("GPL");
- #define	PLATFORM_DRIVER		ehci_atmel_driver
- #endif
- 
-+#ifdef CONFIG_USB_EHCI_AR71XX
-+#include "ehci-ar71xx.c"
-+#define PLATFORM_DRIVER		ehci_ar71xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
- #error "missing bus glue for ehci-hcd"
--- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1085,6 +1085,11 @@ MODULE_LICENSE ("GPL");
- #define TMIO_OHCI_DRIVER	ohci_hcd_tmio_driver
- #endif
- 
-+#ifdef CONFIG_USB_OHCI_AR71XX
-+#include "ohci-ar71xx.c"
-+#define PLATFORM_DRIVER		ohci_hcd_ar71xx_driver
-+#endif
-+
- #if	!defined(PCI_DRIVER) &&		\
- 	!defined(PLATFORM_DRIVER) &&	\
- 	!defined(OF_PLATFORM_DRIVER) &&	\
--- a/target/linux/ar71xx/patches-2.6.33/004-ar71xx_spi_controller.patch
+++ b/target/linux/ar71xx/patches-2.6.33/004-ar71xx_spi_controller.patch
@ -1,26 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,13 @@ if SPI_MASTER
- 
- comment "SPI Master Controller Drivers"
- 
-+config SPI_AR71XX
-+	tristate "Atheros AR71xx SPI Controller"
-+	depends on SPI_MASTER && ATHEROS_AR71XX
-+	select SPI_BITBANG
-+	help
-+	  This is the SPI contoller driver for Atheros AR71xx.
-+
- config SPI_ATMEL
- 	tristate "Atmel SPI Controller"
- 	depends on (ARCH_AT91 || AVR32)
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@ endif
- obj-$(CONFIG_SPI_MASTER)		+= spi.o
- 
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
- obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
- obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
--- a/target/linux/ar71xx/patches-2.6.33/005-ar71xx_mac_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/005-ar71xx_mac_driver.patch
@ -1,21 +0,0 @@
--- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2128,6 +2128,8 @@ config ACENIC_OMIT_TIGON_I
- 
- 	  The safe and default value for this is N.
- 
-+source drivers/net/ag71xx/Kconfig
-+
- config DL2K
- 	tristate "DL2000/TC902x-based Gigabit Ethernet support"
- 	depends on PCI
--- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -106,6 +106,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/
- # end link order section
- #
- 
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_SUNDANCE) += sundance.o
- obj-$(CONFIG_HAMACHI) += hamachi.o
- obj-$(CONFIG_NET) += Space.o loopback.o
--- a/target/linux/ar71xx/patches-2.6.33/006-ar71xx_wdt_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/006-ar71xx_wdt_driver.patch
@ -1,26 +0,0 @@
--- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -840,6 +840,13 @@ config TXX9_WDT
- 	help
- 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
- 
-+config AR71XX_WDT
-+	tristate "Atheros AR71xx Watchdog Timer"
-+	depends on ATHEROS_AR71XX
-+	help
-+	  Hardware driver for the built-in watchdog timer on the Atheros
-+	  AR71xx SoCs.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture
--- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -112,6 +112,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
- 
- # PARISC Architecture
- 
--- a/target/linux/ar71xx/patches-2.6.33/007-ar91xx_flash_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/007-ar91xx_flash_driver.patch
@ -1,26 +0,0 @@
--- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -257,6 +257,13 @@ config MTD_ALCHEMY
- 	help
- 	  Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
- 
-+config MTD_AR91XX_FLASH
-+	tristate "Atheros AR91xx parallel flash support"
-+	depends on ATHEROS_AR71XX
-+	select MTD_COMPLEX_MAPPINGS
-+	help
-+	  Parallel flash driver for the Atheros AR91xx based boards.
-+
- config MTD_DILNETPC
- 	tristate "CFI Flash device mapped on DIL/Net PC"
- 	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
--- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)		+= pci.o
- obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
-+obj-$(CONFIG_MTD_AR91XX_FLASH)	+= ar91xx_flash.o
- obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
- obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
--- a/target/linux/ar71xx/patches-2.6.33/101-ksz8041_phy_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/101-ksz8041_phy_driver.patch
@ -1,24 +0,0 @@
--- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -114,6 +114,11 @@ config RTL8306_PHY
- 	tristate "Driver for Realtek RTL8306S switches"
- 	select SWCONFIG
- 
-+config MICREL_PHY
-+	tristate "Drivers for Micrel/Kendin PHYs"
-+	---help---
-+	  Currently has a driver for the KSZ8041
-+
- config FIXED_PHY
- 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- 	depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi
- obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
- obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
- obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
-+obj-$(CONFIG_MICREL)		+= micrel.o
- obj-$(CONFIG_FIXED_PHY)		+= fixed.o
- obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
- obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
--- a/target/linux/ar71xx/patches-2.6.33/102-mtd_m25p80_add_myloader_parser.patch
+++ b/target/linux/ar71xx/patches-2.6.33/102-mtd_m25p80_add_myloader_parser.patch
@ -1,19 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -927,6 +927,16 @@ static int __devinit m25p_probe(struct s
- 					part_probes, &parts, 0);
- 		}
- 
-+#ifdef CONFIG_MTD_MYLOADER_PARTS
-+		if (nr_parts <= 0) {
-+			static const char *part_probes[]
-+					= { "MyLoader", NULL, };
-+
-+			nr_parts = parse_mtd_partitions(&flash->mtd,
-+					part_probes, &parts, 0);
-+		}
-+#endif
-+
- 		if (nr_parts <= 0 && data && data->parts) {
- 			parts = data->parts;
- 			nr_parts = data->nr_parts;
--- a/target/linux/ar71xx/patches-2.6.33/104-mtd_m25p80_add_redboot_parser.patch
+++ b/target/linux/ar71xx/patches-2.6.33/104-mtd_m25p80_add_redboot_parser.patch
@ -1,18 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -937,6 +937,15 @@ static int __devinit m25p_probe(struct s
- 		}
- #endif
- 
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+		if (nr_parts <= 0) {
-+			static const char *part_probes[]
-+					= { "RedBoot", NULL, };
-+
-+			nr_parts = parse_mtd_partitions(&flash->mtd,
-+					part_probes, &parts, 0);
-+		}
-+#endif
- 		if (nr_parts <= 0 && data && data->parts) {
- 			parts = data->parts;
- 			nr_parts = data->nr_parts;
--- a/target/linux/ar71xx/patches-2.6.33/107-mtd-SST39VF6401B-support.patch
+++ b/target/linux/ar71xx/patches-2.6.33/107-mtd-SST39VF6401B-support.patch
@ -1,29 +0,0 @@
--- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -166,6 +166,7 @@
- #define SST39LF160	0x2782
- #define SST39VF1601	0x234b
- #define SST39VF3201	0x235b
-+#define SST39VF6401B	0x236d
- #define SST39LF512	0x00D4
- #define SST39LF010	0x00D5
- #define SST39LF020	0x00D6
-@@ -1556,6 +1557,18 @@ static const struct amd_flash_info jedec
- 			ERASEINFO(0x10000,64),
- 		}
- 	}, {
-+		.mfr_id         = MANUFACTURER_SST,
-+		.dev_id         = SST39VF6401B,
-+		.name           = "SST 39VF6401B",
-+		.devtypes       = CFI_DEVICETYPE_X16,
-+		.uaddr          = MTD_UADDR_0xAAAA_0x5555,
-+		.dev_size       = SIZE_8MiB,
-+		.cmd_set        = P_ID_AMD_STD,
-+		.nr_regions     = 1,
-+		.regions        = {
-+			ERASEINFO(0x10000,128)
-+		}
-+	}, {
- 		.mfr_id		= MANUFACTURER_ST,
- 		.dev_id		= M29F800AB,
- 		.name		= "ST M29F800AB",
--- a/target/linux/ar71xx/patches-2.6.33/108-mtd_fix_cfi_cmdset_0002_status_check.patch
+++ b/target/linux/ar71xx/patches-2.6.33/108-mtd_fix_cfi_cmdset_0002_status_check.patch
@ -1,69 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1158,8 +1158,8 @@ static int __xipram do_write_oneword(str
- 			break;
- 		}
- 
-		if (chip_ready(map, adr))
-			break;
-+		if (chip_good(map, adr, datum))
-+			goto enable_xip;
- 
- 		/* Latency issues. Drop the lock, wait a while and retry */
- 		UDELAY(map, chip, adr, 1);
-@@ -1175,6 +1175,8 @@ static int __xipram do_write_oneword(str
- 
- 		ret = -EIO;
- 	}
-+
-+ enable_xip:
- 	xip_enable(map, chip, adr);
-  op_done:
- 	chip->state = FL_READY;
-@@ -1521,7 +1523,6 @@ static int cfi_amdstd_write_buffers(stru
- 	return 0;
- }
- 
-
- /*
-  * Handle devices with one erase region, that only implement
-  * the chip erase command.
-@@ -1585,8 +1586,8 @@ static int __xipram do_erase_chip(struct
- 			chip->erase_suspended = 0;
- 		}
- 
-		if (chip_ready(map, adr))
-			break;
-+		if (chip_good(map, adr, map_word_ff(map)))
-+			goto op_done;
- 
- 		if (time_after(jiffies, timeo)) {
- 			printk(KERN_WARNING "MTD %s(): software timeout\n",
-@@ -1606,6 +1607,7 @@ static int __xipram do_erase_chip(struct
- 		ret = -EIO;
- 	}
- 
-+ op_done:
- 	chip->state = FL_READY;
- 	xip_enable(map, chip, adr);
- 	put_chip(map, chip, adr);
-@@ -1673,9 +1675,9 @@ static int __xipram do_erase_oneblock(st
- 			chip->erase_suspended = 0;
- 		}
- 
-		if (chip_ready(map, adr)) {
-+		if (chip_good(map, adr, map_word_ff(map))) {
- 			xip_enable(map, chip, adr);
-			break;
-+			goto op_done;
- 		}
- 
- 		if (time_after(jiffies, timeo)) {
-@@ -1697,6 +1699,7 @@ static int __xipram do_erase_oneblock(st
- 		ret = -EIO;
- 	}
- 
-+ op_done:
- 	chip->state = FL_READY;
- 	put_chip(map, chip, adr);
- 	spin_unlock(chip->mutex);
--- a/target/linux/ar71xx/patches-2.6.33/109-mtd-wrt160nl-trx-parser.patch
+++ b/target/linux/ar71xx/patches-2.6.33/109-mtd-wrt160nl-trx-parser.patch
@ -1,44 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -946,6 +946,16 @@ static int __devinit m25p_probe(struct s
- 					part_probes, &parts, 0);
- 		}
- #endif
-+
-+#ifdef CONFIG_MTD_WRT160NL_PARTS
-+		if (nr_parts <= 0) {
-+			static const char *part_probes[]
-+					= { "wrt160nl", NULL, };
-+
-+			nr_parts = parse_mtd_partitions(&flash->mtd,
-+					part_probes, &parts, 0);
-+		}
-+#endif
- 		if (nr_parts <= 0 && data && data->parts) {
- 			parts = data->parts;
- 			nr_parts = data->nr_parts;
--- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -181,6 +181,12 @@ config MTD_AR7_PARTS
- 	---help---
- 	  TI AR7 partitioning support
- 
-+config MTD_WRT160NL_PARTS
-+	tristate "Linksys WRT160NL partitioning support"
-+	depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
-+	---help---
-+	   Linksys WRT160NL partitioning support
-+
- config MTD_MYLOADER_PARTS
- 	tristate "MyLoader partition parsing"
- 	depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
--- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
- obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
-+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
- obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- 
--- a/target/linux/ar71xx/patches-2.6.33/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
+++ b/target/linux/ar71xx/patches-2.6.33/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
@ -1,22 +0,0 @@
--- a/drivers/usb/host/ehci-q.c
-+++ b/drivers/usb/host/ehci-q.c
-@@ -1194,6 +1194,9 @@ static void end_unlink_async (struct ehc
- 		ehci->reclaim = NULL;
- 		start_unlink_async (ehci, next);
- 	}
-+
-+	if (ehci->has_synopsys_hc_bug)
-+		writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
- }
- 
- /* makes sure the async qh will become idle */
--- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -130,6 +130,7 @@ struct ehci_hcd {			/* one per controlle
- 	unsigned		has_amcc_usb23:1;
- 	unsigned		need_io_watchdog:1;
- 	unsigned		broken_periodic:1;
-+	unsigned		has_synopsys_hc_bug:1; /* Synopsys HC */
- 
- 	/* required for usb32 quirk */
- 	#define OHCI_CTRL_HCFS          (3 << 6)
--- a/target/linux/ar71xx/patches-2.6.33/111-mtd-cfi_cmdset_0002-force-word-write.patch
+++ b/target/linux/ar71xx/patches-2.6.33/111-mtd-cfi_cmdset_0002-force-word-write.patch
@ -1,61 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -39,7 +39,7 @@
- #include <linux/mtd/xip.h>
- 
- #define AMD_BOOTLOC_BUG
-#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
- 
- #define MAX_WORD_RETRIES 3
- 
-@@ -54,7 +54,9 @@
- 
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -189,6 +191,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
- 
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
- {
- 	struct map_info *map = mtd->priv;
-@@ -198,6 +201,7 @@ static void fixup_use_write_buffers(stru
- 		mtd->write = cfi_amdstd_write_buffers;
- 	}
- }
-+#endif /* !FORCE_WORD_WRITE */
- 
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
-@@ -1332,6 +1336,7 @@ static int cfi_amdstd_write_words(struct
- /*
-  * FIXME: interleaved mode not tested, and probably not supported!
-  */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- 				    unsigned long adr, const u_char *buf,
- 				    int len)
-@@ -1443,7 +1448,6 @@ static int __xipram do_write_buffer(stru
- 	return ret;
- }
- 
-
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- 				    size_t *retlen, const u_char *buf)
- {
-@@ -1522,6 +1526,7 @@ static int cfi_amdstd_write_buffers(stru
- 
- 	return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
- 
- /*
-  * Handle devices with one erase region, that only implement
--- a/target/linux/ar71xx/patches-2.6.33/120-dsa-trailer-tag-validation-fix.patch
+++ b/target/linux/ar71xx/patches-2.6.33/120-dsa-trailer-tag-validation-fix.patch
@ -1,11 +0,0 @@
--- a/net/dsa/tag_trailer.c
-+++ b/net/dsa/tag_trailer.c
-@@ -86,7 +86,7 @@ static int trailer_rcv(struct sk_buff *s
- 
- 	trailer = skb_tail_pointer(skb) - 4;
- 	if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
-	    (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
-+	    (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
- 		goto out_drop;
- 
- 	source_port = trailer[1] & 7;
--- a/target/linux/ar71xx/patches-2.6.33/121-dsa-add-88e6063-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/121-dsa-add-88e6063-driver.patch
@ -1,26 +0,0 @@
--- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060
- 	  This enables support for the Marvell 88E6060 ethernet switch
- 	  chip.
- 
-+config NET_DSA_MV88E6063
-+	bool "Marvell 88E6063 ethernet switch chip support"
-+	select NET_DSA_TAG_TRAILER
-+	---help---
-+	  This enables support for the Marvell 88E6063 ethernet switch
-+	  chip
-+
- config NET_DSA_MV88E6XXX_NEED_PPU
- 	bool
- 	default n
--- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag
- # switch drivers
- obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
- obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
- obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o
- 
--- a/target/linux/ar71xx/patches-2.6.33/122-dsa-add-qinq-tagging-format.patch
+++ b/target/linux/ar71xx/patches-2.6.33/122-dsa-add-qinq-tagging-format.patch
@ -1,79 +0,0 @@
--- a/include/linux/if_ether.h
-+++ b/include/linux/if_ether.h
-@@ -81,6 +81,7 @@
- #define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
- #define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
- #define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
-+#define ETH_P_QINQ	0x9100		/* QinQ VLAN Stacking Protocol */
- #define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
- 
- /*
--- a/net/dsa/dsa_priv.h
-+++ b/net/dsa/dsa_priv.h
-@@ -174,6 +174,9 @@ netdev_tx_t dsa_xmit(struct sk_buff *skb
- /* tag_edsa.c */
- netdev_tx_t edsa_xmit(struct sk_buff *skb, struct net_device *dev);
- 
-+/* tag_qinq.c */
-+netdev_tx_t qinq_xmit(struct sk_buff *skb, struct net_device *dev);
-+
- /* tag_trailer.c */
- netdev_tx_t trailer_xmit(struct sk_buff *skb, struct net_device *dev);
- 
--- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -23,6 +23,10 @@ config NET_DSA_TAG_TRAILER
- 	bool
- 	default n
- 
-+config NET_DSA_TAG_QINQ
-+	bool
-+	default y
-+
- 
- # switch drivers
- config NET_DSA_MV88E6XXX
--- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -1,6 +1,7 @@
- # tagging formats
- obj-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
- obj-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
-+obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qinq.o
- obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
- 
- # switch drivers
--- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -321,6 +321,19 @@ static const struct net_device_ops edsa_
- 	.ndo_do_ioctl		= dsa_slave_ioctl,
- };
- #endif
-+#ifdef CONFIG_NET_DSA_TAG_QINQ
-+static const struct net_device_ops qinq_netdev_ops = {
-+	.ndo_init		= dsa_slave_init,
-+	.ndo_open	 	= dsa_slave_open,
-+	.ndo_stop		= dsa_slave_close,
-+	.ndo_start_xmit		= qinq_xmit,
-+	.ndo_change_rx_flags	= dsa_slave_change_rx_flags,
-+	.ndo_set_rx_mode	= dsa_slave_set_rx_mode,
-+	.ndo_set_multicast_list = dsa_slave_set_rx_mode,
-+	.ndo_set_mac_address	= dsa_slave_set_mac_address,
-+	.ndo_do_ioctl		= dsa_slave_ioctl,
-+};
-+#endif
- #ifdef CONFIG_NET_DSA_TAG_TRAILER
- static const struct net_device_ops trailer_netdev_ops = {
- 	.ndo_init		= dsa_slave_init,
-@@ -366,6 +379,11 @@ dsa_slave_create(struct dsa_switch *ds, 
- 		slave_dev->netdev_ops = &edsa_netdev_ops;
- 		break;
- #endif
-+#ifdef CONFIG_NET_DSA_TAG_QINQ
-+	case htons(ETH_P_QINQ):
-+		slave_dev->netdev_ops = &qinq_netdev_ops;
-+		break;
-+#endif
- #ifdef CONFIG_NET_DSA_TAG_TRAILER
- 	case htons(ETH_P_TRAILER):
- 		slave_dev->netdev_ops = &trailer_netdev_ops;
--- a/target/linux/ar71xx/patches-2.6.33/123-dsa-add-ar7240-built-in-switch-support.patch
+++ b/target/linux/ar71xx/patches-2.6.33/123-dsa-add-ar7240-built-in-switch-support.patch
@ -1,28 +0,0 @@
--- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -29,6 +29,15 @@ config NET_DSA_TAG_QINQ
- 
- 
- # switch drivers
-+config NET_DSA_AR7240
-+	bool "Atheros AR7240 built-in ethernet switch support"
-+	depends on ATHEROS_AR71XX
-+	default n
-+	select NET_DSA_TAG_QINQ
-+	---help---
-+	  This enables support for the built-in ethernet switch of the
-+	  Atheros AR7240 SoC.
-+
- config NET_DSA_MV88E6XXX
- 	bool
- 	default n
--- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qi
- obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
- 
- # switch drivers
-+obj-$(CONFIG_NET_DSA_AR7240) += ar7240.o
- obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
- obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
--- a/target/linux/ar71xx/patches-2.6.33/140-redboot_partition_scan.patch
+++ b/target/linux/ar71xx/patches-2.6.33/140-redboot_partition_scan.patch
@ -1,54 +0,0 @@
--- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
- 	static char nullstring[] = "unallocated";
- #endif
- 
-+	buf = vmalloc(master->erasesize);
-+	if (!buf)
-+		return -ENOMEM;
-+
-+ restart:
- 	if ( directory < 0 ) {
- 		offset = master->size + directory * master->erasesize;
-		while (master->block_isbad && 
-+		while (master->block_isbad &&
- 		       master->block_isbad(master, offset)) {
- 			if (!offset) {
- 			nogood:
- 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+				vfree(buf);
- 				return -EIO;
- 			}
- 			offset -= master->erasesize;
- 		}
- 	} else {
- 		offset = directory * master->erasesize;
-		while (master->block_isbad && 
-+		while (master->block_isbad &&
- 		       master->block_isbad(master, offset)) {
- 			offset += master->erasesize;
- 			if (offset == master->size)
- 				goto nogood;
- 		}
- 	}
-	buf = vmalloc(master->erasesize);
-
-	if (!buf)
-		return -ENOMEM;
-
- 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- 	       master->name, offset);
- 
-@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
- 	}
- 	if (i == numslots) {
- 		/* Didn't find it */
-+		if (offset + master->erasesize < master->size) {
-+			/* not at the end of the flash yet, maybe next block :) */
-+			directory++;
-+			goto restart;
-+		}
- 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- 		       master->name);
- 		ret = 0;
--- a/target/linux/ar71xx/patches-2.6.33/150-drivers-link-spi-before-mtd.patch
+++ b/target/linux/ar71xx/patches-2.6.33/150-drivers-link-spi-before-mtd.patch
@ -1,12 +0,0 @@
--- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -44,8 +44,8 @@ obj-y				+= macintosh/
- obj-$(CONFIG_IDE)		+= ide/
- obj-$(CONFIG_SCSI)		+= scsi/
- obj-$(CONFIG_ATA)		+= ata/
-obj-$(CONFIG_MTD)		+= mtd/
- obj-$(CONFIG_SPI)		+= spi/
-+obj-$(CONFIG_MTD)		+= mtd/
- obj-y				+= net/
- obj-$(CONFIG_ATM)		+= atm/
- obj-$(CONFIG_FUSION)		+= message/
--- a/target/linux/ar71xx/patches-2.6.33/151-spi-add-various-flags.patch
+++ b/target/linux/ar71xx/patches-2.6.33/151-spi-add-various-flags.patch
@ -1,19 +0,0 @@
--- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -434,6 +434,8 @@ struct spi_transfer {
- 	dma_addr_t	rx_dma;
- 
- 	unsigned	cs_change:1;
-+	unsigned	verify:1;
-+	unsigned	fast_write:1;
- 	u8		bits_per_word;
- 	u16		delay_usecs;
- 	u32		speed_hz;
-@@ -475,6 +477,7 @@ struct spi_message {
- 	struct spi_device	*spi;
- 
- 	unsigned		is_dma_mapped:1;
-+	unsigned		fast_read:1;
- 
- 	/* REVISIT:  we might want a flag affecting the behavior of the
- 	 * last transfer ... allowing things like "read 16 bit length L"
--- a/target/linux/ar71xx/patches-2.6.33/152-rb4xx-spi-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/152-rb4xx-spi-driver.patch
@ -1,25 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -225,6 +225,12 @@ config SPI_PXA2XX
- 	  The driver can be configured to use any SSP port and additional
- 	  documentation can be found a Documentation/spi/pxa2xx.
- 
-+config SPI_RB4XX
-+	tristate "Mikrotik RB4XX SPI master"
-+	depends on SPI_MASTER && AR71XX_MACH_RB4XX
-+	help
-+	  SPI controller driver for the Mikrotik RB4xx series boards.
-+
- config SPI_S3C24XX
- 	tristate "Samsung S3C24XX series SPI"
- 	depends on ARCH_S3C2410 && EXPERIMENTAL
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -44,6 +44,7 @@ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.
- obj-$(CONFIG_SPI_SH_MSIOF)		+= spi_sh_msiof.o
- obj-$(CONFIG_SPI_STMP3XXX)		+= spi_stmp.o
- obj-$(CONFIG_SPI_NUC900)		+= spi_nuc900.o
-+obj-$(CONFIG_SPI_RB4XX)			+= rb4xx_spi.o
- 
- # special build for s3c24xx spi driver with fiq support
- spi_s3c24xx_hw-y			:= spi_s3c24xx.o
--- a/target/linux/ar71xx/patches-2.6.33/153-spi-rb4xx-cpld-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/153-spi-rb4xx-cpld-driver.patch
@ -1,26 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -363,6 +363,13 @@ config SPI_TLE62X0
- 	  sysfs interface, with each line presented as a kind of GPIO
- 	  exposing both switch control and diagnostic feedback.
- 
-+config SPI_RB4XX_CPLD
-+	tristate "MikroTik RB4XX CPLD driver"
-+	depends on AR71XX_MACH_RB4XX
-+	help
-+	  SPI driver for the Xilinx CPLD chip present on the
-+	  MikroTik RB4xx boards.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -53,6 +53,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
- # 	... add above this line ...
- 
- # SPI protocol drivers (device/link on bus)
-+obj-$(CONFIG_SPI_RB4XX_CPLD)	+= spi_rb4xx_cpld.o
- obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
- obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
- # 	... add above this line ...
--- a/target/linux/ar71xx/patches-2.6.33/200-rb4xx_nand_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/200-rb4xx_nand_driver.patch
@ -1,21 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -488,4 +488,8 @@ config MTD_NAND_W90P910
- 	  This enables the driver for the NAND Flash on evaluation board based
- 	  on w90p910.
- 
-+config MTD_NAND_RB4XX
-+	tristate "NAND flash driver for RouterBoard 4xx series"
-+	depends on MTD_NAND && AR71XX_MACH_RB4XX
-+
- endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
- obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
--- a/target/linux/ar71xx/patches-2.6.33/201-ap83_spi_controller.patch
+++ b/target/linux/ar71xx/patches-2.6.33/201-ap83_spi_controller.patch
@ -1,27 +0,0 @@
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@ endif
- obj-$(CONFIG_SPI_MASTER)		+= spi.o
- 
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AP83)			+= ap83_spi.o
- obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
- obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,14 @@ if SPI_MASTER
- 
- comment "SPI Master Controller Drivers"
- 
-+config SPI_AP83
-+	tristate "Atheros AP83 specific SPI Controller"
-+	depends on SPI_MASTER && AR71XX_MACH_AP83
-+	select SPI_BITBANG
-+	help
-+	  This is a specific SPI controller driver for the Atheros AP83
-+	  reference board.
-+
- config SPI_AR71XX
- 	tristate "Atheros AR71xx SPI Controller"
- 	depends on SPI_MASTER && ATHEROS_AR71XX
--- a/target/linux/ar71xx/patches-2.6.33/202-spi_vsc7385_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/202-spi_vsc7385_driver.patch
@ -1,24 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -378,6 +378,11 @@ config SPI_RB4XX_CPLD
- 	  SPI driver for the Xilinx CPLD chip present on the
- 	  MikroTik RB4xx boards.
- 
-+config SPI_VSC7385
-+	tristate "Vitesse VSC7385 ethernet switch driver"
-+	help
-+	  SPI driver for the Vitesse VSC7385 ethernet switch.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -56,6 +56,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
- # SPI protocol drivers (device/link on bus)
- obj-$(CONFIG_SPI_RB4XX_CPLD)	+= spi_rb4xx_cpld.o
- obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
-+obj-$(CONFIG_SPI_VSC7385)	+= spi_vsc7385.o
- obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
- # 	... add above this line ...
- 
--- a/target/linux/ar71xx/patches-2.6.33/203-pb44_spi_controller.patch
+++ b/target/linux/ar71xx/patches-2.6.33/203-pb44_spi_controller.patch
@ -1,27 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -68,6 +68,14 @@ config SPI_AR71XX
- 	help
- 	  This is the SPI contoller driver for Atheros AR71xx.
- 
-+config SPI_PB44
-+	tristate "Atheros PB44 board specific SPI controller"
-+	depends on SPI_MASTER && AR71XX_MACH_PB44
-+	select SPI_BITBANG
-+	help
-+	  This is a specific SPI controller driver for the Atheros PB44
-+	  reference board.
-+
- config SPI_ATMEL
- 	tristate "Atmel SPI Controller"
- 	depends on (ARCH_AT91 || AVR32)
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
- obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
- obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
- obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
-+obj-$(CONFIG_SPI_PB44)			+= pb44_spi.o
- obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
- obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
- obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
--- a/target/linux/ar71xx/patches-2.6.33/205-wndr3700-usb-led-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/205-wndr3700-usb-led-driver.patch
@ -1,26 +0,0 @@
--- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -269,6 +269,13 @@ config LEDS_ADP5520
- 	  To compile this driver as a module, choose M here: the module will
- 	  be called leds-adp5520.
- 
-+config LEDS_WNDR3700_USB
-+	tristate "NETGEAR WNDR3700 USB LED driver"
-+	depends on LEDS_CLASS && AR71XX_MACH_WNDR3700
-+	help
-+	  This option enables support for the USB LED found on the
-+	  NETGEAR WNDR3700 board.
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGERS
--- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_LEDS_DA903X)		+= leds-da903
- obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
- obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
- obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
-+obj-${CONFIG_LEDS_WNDR3700_USB}		+= leds-wndr3700-usb.o
- obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
- obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
- obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
--- a/target/linux/ar71xx/patches-2.6.33/206-nxp-74hc153-gpio-chip-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/206-nxp-74hc153-gpio-chip-driver.patch
@ -1,25 +0,0 @@
--- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -255,4 +255,12 @@ config GPIO_UCB1400
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called ucb1400_gpio.
- 
-+comment "Other GPIO expanders"
-+
-+config GPIO_NXP_74HC153
-+	tristate "NXP 74HC153 Dual 4-input multiplexer"
-+	help
-+	  Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
-+	  provides a GPIO interface supporting inputs.
-+
- endif
--- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_GPIO_MAX7301)	+= max7301.o
- obj-$(CONFIG_GPIO_MAX732X)	+= max732x.o
- obj-$(CONFIG_GPIO_MC33880)	+= mc33880.o
- obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
-+obj-$(CONFIG_GPIO_NXP_74HC153)	+= nxp_74hc153.o
- obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
- obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
- obj-$(CONFIG_GPIO_PL061)	+= pl061.o
--- a/target/linux/ar71xx/patches-2.6.33/207-rb750-led-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/207-rb750-led-driver.patch
@ -1,23 +0,0 @@
--- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -276,6 +276,10 @@ config LEDS_WNDR3700_USB
- 	  This option enables support for the USB LED found on the
- 	  NETGEAR WNDR3700 board.
- 
-+config LEDS_RB750
-+	tristate "LED driver for the Mikrotik RouterBOARD 750"
-+	depends on LEDS_CLASS && AR71XX_MACH_RB750
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGERS
--- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_LEDS_REGULATOR)		+= leds-re
- obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
- obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
- obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
-+obj-$(CONFIG_LEDS_RB750)		+= leds-rb750.o
- 
- # LED SPI Drivers
- obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
--- a/target/linux/ar71xx/patches-2.6.33/208-rb750-nand-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.33/208-rb750-nand-driver.patch
@ -1,21 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -492,4 +492,8 @@ config MTD_NAND_RB4XX
- 	tristate "NAND flash driver for RouterBoard 4xx series"
- 	depends on MTD_NAND && AR71XX_MACH_RB4XX
- 
-+config MTD_NAND_RB750
-+	tristate "NAND flash driver for the RouterBoard 750"
-+	depends on MTD_NAND && AR71XX_MACH_RB750
-+
- endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx
- obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
-+obj-$(CONFIG_MTD_NAND_RB750)		+= rb750_nand.o
- obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
--- a/target/linux/ar71xx/patches-2.6.33/300-mips_fw_myloader.patch
+++ b/target/linux/ar71xx/patches-2.6.33/300-mips_fw_myloader.patch
@ -1,22 +0,0 @@
--- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -190,6 +190,7 @@ endif
- #
- libs-$(CONFIG_ARC)		+= arch/mips/fw/arc/
- libs-$(CONFIG_CFE)		+= arch/mips/fw/cfe/
-+libs-$(CONFIG_MYLOADER)		+= arch/mips/fw/myloader/
- libs-$(CONFIG_SNIPROM)		+= arch/mips/fw/sni/
- libs-y				+= arch/mips/fw/lib/
- 
--- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -877,6 +877,9 @@ config MIPS_NILE4
- config MIPS_DISABLE_OBSOLETE_IDE
- 	bool
- 
-+config MYLOADER
-+	bool
-+
- config SYNC_R4K
- 	bool
- 
--- a/target/linux/ar71xx/patches-2.6.33/901-get_c0_compare_irq_function.patch
+++ b/target/linux/ar71xx/patches-2.6.33/901-get_c0_compare_irq_function.patch
@ -1,29 +0,0 @@
--- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -50,6 +50,7 @@
- #include <asm/types.h>
- #include <asm/stacktrace.h>
- #include <asm/irq.h>
-+#include <asm/time.h>
- 
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1496,6 +1497,8 @@ void __cpuinit per_cpu_trap_init(void)
- 	if (cpu_has_mips_r2) {
- 		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
- 		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
-+		if (get_c0_compare_irq)
-+			cp0_compare_irq = get_c0_compare_irq();
- 		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
- 		if (cp0_perfcount_irq == cp0_compare_irq)
- 			cp0_perfcount_irq = -1;
--- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
-  */
- #ifdef CONFIG_CEVT_R4K_LIB
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- extern int r4k_clockevent_init(void);
- #endif
- 
--- a/target/linux/ar71xx/patches-2.6.34/001-ar71xx_core.patch
+++ b/target/linux/ar71xx/patches-2.6.34/001-ar71xx_core.patch
@ -1,50 +0,0 @@
--- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -181,6 +181,13 @@ ifeq (,$(findstring march=octeon, $(cfla
- cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
- endif
- 
-+#
-+# Atheros AR71xx
-+#
-+core-$(CONFIG_ATHEROS_AR71XX)	+= arch/mips/ar71xx/
-+cflags-$(CONFIG_ATHEROS_AR71XX)	+= -I$(srctree)/arch/mips/include/asm/mach-ar71xx
-+load-$(CONFIG_ATHEROS_AR71XX)	+= 0xffffffff80060000
-+
- cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
- cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
- cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
--- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -48,6 +48,23 @@ config AR7
- 	  Support for the Texas Instruments AR7 System-on-a-Chip
- 	  family: TNETD7100, 7200 and 7300.
- 
-+config ATHEROS_AR71XX
-+	bool "Atheros AR71xx based boards"
-+	select CEVT_R4K
-+	select CSRC_R4K
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select ARCH_REQUIRE_GPIOLIB
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_HAS_CPU_MIPS32_R2
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_HAS_EARLY_PRINTK
-+	select MIPS_MACHINE
-+	help
-+	  Support for Atheros AR71xx based boards.
-+
- config BCM47XX
- 	bool "Broadcom BCM47XX based boards"
- 	select CEVT_R4K
-@@ -684,6 +701,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
- endchoice
- 
- source "arch/mips/alchemy/Kconfig"
-+source "arch/mips/ar71xx/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
- source "arch/mips/lasat/Kconfig"
--- a/target/linux/ar71xx/patches-2.6.34/002-ar71xx_pci.patch
+++ b/target/linux/ar71xx/patches-2.6.34/002-ar71xx_pci.patch
@ -1,10 +0,0 @@
--- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
- obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
- 					ops-bcm63xx.o
-+obj-$(CONFIG_ATHEROS_AR71XX)	+= pci-ar71xx.o pci-ar724x.o
- 
- #
- # These are still pretty much in the old state, watch, go blind.
--- a/target/linux/ar71xx/patches-2.6.34/003-ar71xx_usb_host.patch
+++ b/target/linux/ar71xx/patches-2.6.34/003-ar71xx_usb_host.patch
@ -1,58 +0,0 @@
--- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -109,6 +109,13 @@ config XPS_USB_HCD_XILINX
- 		support both high speed and full speed devices, or high speed
- 		devices only.
- 
-+config USB_EHCI_AR71XX
-+	bool "USB EHCI support for AR71xx"
-+	depends on USB_EHCI_HCD && ATHEROS_AR71XX
-+	default y
-+	help
-+	  Support for Atheros AR71xx built-in EHCI controller
-+
- config USB_EHCI_FSL
- 	bool "Support for Freescale on-chip EHCI USB controller"
- 	depends on USB_EHCI_HCD && FSL_SOC
-@@ -207,6 +214,13 @@ config USB_OHCI_HCD
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called ohci-hcd.
- 
-+config USB_OHCI_AR71XX
-+	bool "USB OHCI support for Atheros AR71xx"
-+	depends on USB_OHCI_HCD && ATHEROS_AR71XX
-+	default y
-+	help
-+	  Support for Atheros AR71xx built-in OHCI controller
-+
- config USB_OHCI_HCD_PPC_SOC
- 	bool "OHCI support for on-chip PPC USB controller"
- 	depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
--- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1159,6 +1159,11 @@ MODULE_LICENSE ("GPL");
- #define	PLATFORM_DRIVER		ehci_atmel_driver
- #endif
- 
-+#ifdef CONFIG_USB_EHCI_AR71XX
-+#include "ehci-ar71xx.c"
-+#define PLATFORM_DRIVER		ehci_ar71xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
- #error "missing bus glue for ehci-hcd"
--- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1090,6 +1090,11 @@ MODULE_LICENSE ("GPL");
- #define TMIO_OHCI_DRIVER	ohci_hcd_tmio_driver
- #endif
- 
-+#ifdef CONFIG_USB_OHCI_AR71XX
-+#include "ohci-ar71xx.c"
-+#define PLATFORM_DRIVER		ohci_hcd_ar71xx_driver
-+#endif
-+
- #if	!defined(PCI_DRIVER) &&		\
- 	!defined(PLATFORM_DRIVER) &&	\
- 	!defined(OF_PLATFORM_DRIVER) &&	\
--- a/target/linux/ar71xx/patches-2.6.34/004-ar71xx_spi_controller.patch
+++ b/target/linux/ar71xx/patches-2.6.34/004-ar71xx_spi_controller.patch
@ -1,26 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,13 @@ if SPI_MASTER
- 
- comment "SPI Master Controller Drivers"
- 
-+config SPI_AR71XX
-+	tristate "Atheros AR71xx SPI Controller"
-+	depends on SPI_MASTER && ATHEROS_AR71XX
-+	select SPI_BITBANG
-+	help
-+	  This is the SPI contoller driver for Atheros AR71xx.
-+
- config SPI_ATMEL
- 	tristate "Atmel SPI Controller"
- 	depends on (ARCH_AT91 || AVR32)
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@ endif
- obj-$(CONFIG_SPI_MASTER)		+= spi.o
- 
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
- obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
- obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
--- a/target/linux/ar71xx/patches-2.6.34/005-ar71xx_mac_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.34/005-ar71xx_mac_driver.patch
@ -1,21 +0,0 @@
--- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2161,6 +2161,8 @@ config ACENIC_OMIT_TIGON_I
- 
- 	  The safe and default value for this is N.
- 
-+source drivers/net/ag71xx/Kconfig
-+
- config DL2K
- 	tristate "DL2000/TC902x-based Gigabit Ethernet support"
- 	depends on PCI
--- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -109,6 +109,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/
- # end link order section
- #
- 
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_SUNDANCE) += sundance.o
- obj-$(CONFIG_HAMACHI) += hamachi.o
- obj-$(CONFIG_NET) += Space.o loopback.o
--- a/target/linux/ar71xx/patches-2.6.34/006-ar71xx_wdt_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.34/006-ar71xx_wdt_driver.patch
@ -1,26 +0,0 @@
--- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -857,6 +857,13 @@ config TXX9_WDT
- 	help
- 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
- 
-+config AR71XX_WDT
-+	tristate "Atheros AR71xx Watchdog Timer"
-+	depends on ATHEROS_AR71XX
-+	help
-+	  Hardware driver for the built-in watchdog timer on the Atheros
-+	  AR71xx SoCs.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture
--- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -113,6 +113,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
- 
- # PARISC Architecture
- 
--- a/target/linux/ar71xx/patches-2.6.34/007-ar91xx_flash_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.34/007-ar91xx_flash_driver.patch
@ -1,26 +0,0 @@
--- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -251,6 +251,13 @@ config MTD_NETtel
- 	help
- 	  Support for flash chips on NETtel/SecureEdge/SnapGear boards.
- 
-+config MTD_AR91XX_FLASH
-+	tristate "Atheros AR91xx parallel flash support"
-+	depends on ATHEROS_AR71XX
-+	select MTD_COMPLEX_MAPPINGS
-+	help
-+	  Parallel flash driver for the Atheros AR91xx based boards.
-+
- config MTD_DILNETPC
- 	tristate "CFI Flash device mapped on DIL/Net PC"
- 	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
--- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
- obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)		+= pci.o
-+obj-$(CONFIG_MTD_AR91XX_FLASH)	+= ar91xx_flash.o
- obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
- obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
--- a/target/linux/ar71xx/patches-2.6.34/101-ksz8041_phy_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.34/101-ksz8041_phy_driver.patch
@ -1,24 +0,0 @@
--- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -119,6 +119,11 @@ config RTL8306_PHY
- 	tristate "Driver for Realtek RTL8306S switches"
- 	select SWCONFIG
- 
-+config MICREL_PHY
-+	tristate "Drivers for Micrel/Kendin PHYs"
-+	---help---
-+	  Currently has a driver for the KSZ8041
-+
- config FIXED_PHY
- 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- 	depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi
- obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
- obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
- obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
-+obj-$(CONFIG_MICREL)		+= micrel.o
- obj-$(CONFIG_FIXED_PHY)		+= fixed.o
- obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
- obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
--- a/target/linux/ar71xx/patches-2.6.34/102-mtd_m25p80_add_myloader_parser.patch
+++ b/target/linux/ar71xx/patches-2.6.34/102-mtd_m25p80_add_myloader_parser.patch
@ -1,19 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -928,6 +928,16 @@ static int __devinit m25p_probe(struct s
- 					part_probes, &parts, 0);
- 		}
- 
-+#ifdef CONFIG_MTD_MYLOADER_PARTS
-+		if (nr_parts <= 0) {
-+			static const char *part_probes[]
-+					= { "MyLoader", NULL, };
-+
-+			nr_parts = parse_mtd_partitions(&flash->mtd,
-+					part_probes, &parts, 0);
-+		}
-+#endif
-+
- 		if (nr_parts <= 0 && data && data->parts) {
- 			parts = data->parts;
- 			nr_parts = data->nr_parts;
--- a/target/linux/ar71xx/patches-2.6.34/104-mtd_m25p80_add_redboot_parser.patch
+++ b/target/linux/ar71xx/patches-2.6.34/104-mtd_m25p80_add_redboot_parser.patch
@ -1,18 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -938,6 +938,15 @@ static int __devinit m25p_probe(struct s
- 		}
- #endif
- 
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+		if (nr_parts <= 0) {
-+			static const char *part_probes[]
-+					= { "RedBoot", NULL, };
-+
-+			nr_parts = parse_mtd_partitions(&flash->mtd,
-+					part_probes, &parts, 0);
-+		}
-+#endif
- 		if (nr_parts <= 0 && data && data->parts) {
- 			parts = data->parts;
- 			nr_parts = data->nr_parts;
--- a/target/linux/ar71xx/patches-2.6.34/107-mtd-SST39VF6401B-support.patch
+++ b/target/linux/ar71xx/patches-2.6.34/107-mtd-SST39VF6401B-support.patch
@ -1,29 +0,0 @@
--- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -166,6 +166,7 @@
- #define SST39LF160	0x2782
- #define SST39VF1601	0x234b
- #define SST39VF3201	0x235b
-+#define SST39VF6401B	0x236d
- #define SST39LF512	0x00D4
- #define SST39LF010	0x00D5
- #define SST39LF020	0x00D6
-@@ -1556,6 +1557,18 @@ static const struct amd_flash_info jedec
- 			ERASEINFO(0x10000,64),
- 		}
- 	}, {
-+		.mfr_id         = MANUFACTURER_SST,
-+		.dev_id         = SST39VF6401B,
-+		.name           = "SST 39VF6401B",
-+		.devtypes       = CFI_DEVICETYPE_X16,
-+		.uaddr          = MTD_UADDR_0xAAAA_0x5555,
-+		.dev_size       = SIZE_8MiB,
-+		.cmd_set        = P_ID_AMD_STD,
-+		.nr_regions     = 1,
-+		.regions        = {
-+			ERASEINFO(0x10000,128)
-+		}
-+	}, {
- 		.mfr_id		= MANUFACTURER_ST,
- 		.dev_id		= M29F800AB,
- 		.name		= "ST M29F800AB",
--- a/target/linux/ar71xx/patches-2.6.34/108-mtd_fix_cfi_cmdset_0002_status_check.patch
+++ b/target/linux/ar71xx/patches-2.6.34/108-mtd_fix_cfi_cmdset_0002_status_check.patch
@ -1,69 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1158,8 +1158,8 @@ static int __xipram do_write_oneword(str
- 			break;
- 		}
- 
-		if (chip_ready(map, adr))
-			break;
-+		if (chip_good(map, adr, datum))
-+			goto enable_xip;
- 
- 		/* Latency issues. Drop the lock, wait a while and retry */
- 		UDELAY(map, chip, adr, 1);
-@@ -1175,6 +1175,8 @@ static int __xipram do_write_oneword(str
- 
- 		ret = -EIO;
- 	}
-+
-+ enable_xip:
- 	xip_enable(map, chip, adr);
-  op_done:
- 	chip->state = FL_READY;
-@@ -1521,7 +1523,6 @@ static int cfi_amdstd_write_buffers(stru
- 	return 0;
- }
- 
-
- /*
-  * Handle devices with one erase region, that only implement
-  * the chip erase command.
-@@ -1585,8 +1586,8 @@ static int __xipram do_erase_chip(struct
- 			chip->erase_suspended = 0;
- 		}
- 
-		if (chip_ready(map, adr))
-			break;
-+		if (chip_good(map, adr, map_word_ff(map)))
-+			goto op_done;
- 
- 		if (time_after(jiffies, timeo)) {
- 			printk(KERN_WARNING "MTD %s(): software timeout\n",
-@@ -1606,6 +1607,7 @@ static int __xipram do_erase_chip(struct
- 		ret = -EIO;
- 	}
- 
-+ op_done:
- 	chip->state = FL_READY;
- 	xip_enable(map, chip, adr);
- 	put_chip(map, chip, adr);
-@@ -1673,9 +1675,9 @@ static int __xipram do_erase_oneblock(st
- 			chip->erase_suspended = 0;
- 		}
- 
-		if (chip_ready(map, adr)) {
-+		if (chip_good(map, adr, map_word_ff(map))) {
- 			xip_enable(map, chip, adr);
-			break;
-+			goto op_done;
- 		}
- 
- 		if (time_after(jiffies, timeo)) {
-@@ -1697,6 +1699,7 @@ static int __xipram do_erase_oneblock(st
- 		ret = -EIO;
- 	}
- 
-+ op_done:
- 	chip->state = FL_READY;
- 	put_chip(map, chip, adr);
- 	spin_unlock(chip->mutex);
--- a/target/linux/ar71xx/patches-2.6.34/109-mtd-wrt160nl-trx-parser.patch
+++ b/target/linux/ar71xx/patches-2.6.34/109-mtd-wrt160nl-trx-parser.patch
@ -1,44 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -947,6 +947,16 @@ static int __devinit m25p_probe(struct s
- 					part_probes, &parts, 0);
- 		}
- #endif
-+
-+#ifdef CONFIG_MTD_WRT160NL_PARTS
-+		if (nr_parts <= 0) {
-+			static const char *part_probes[]
-+					= { "wrt160nl", NULL, };
-+
-+			nr_parts = parse_mtd_partitions(&flash->mtd,
-+					part_probes, &parts, 0);
-+		}
-+#endif
- 		if (nr_parts <= 0 && data && data->parts) {
- 			parts = data->parts;
- 			nr_parts = data->nr_parts;
--- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -181,6 +181,12 @@ config MTD_AR7_PARTS
- 	---help---
- 	  TI AR7 partitioning support
- 
-+config MTD_WRT160NL_PARTS
-+	tristate "Linksys WRT160NL partitioning support"
-+	depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
-+	---help---
-+	   Linksys WRT160NL partitioning support
-+
- config MTD_MYLOADER_PARTS
- 	tristate "MyLoader partition parsing"
- 	depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
--- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
- obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
-+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
- obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- 
--- a/target/linux/ar71xx/patches-2.6.34/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
+++ b/target/linux/ar71xx/patches-2.6.34/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
@ -1,22 +0,0 @@
--- a/drivers/usb/host/ehci-q.c
-+++ b/drivers/usb/host/ehci-q.c
-@@ -1194,6 +1194,9 @@ static void end_unlink_async (struct ehc
- 		ehci->reclaim = NULL;
- 		start_unlink_async (ehci, next);
- 	}
-+
-+	if (ehci->has_synopsys_hc_bug)
-+		writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
- }
- 
- /* makes sure the async qh will become idle */
--- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -131,6 +131,7 @@ struct ehci_hcd {			/* one per controlle
- 	unsigned		need_io_watchdog:1;
- 	unsigned		broken_periodic:1;
- 	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
-+	unsigned		has_synopsys_hc_bug:1; /* Synopsys HC */
- 
- 	/* required for usb32 quirk */
- 	#define OHCI_CTRL_HCFS          (3 << 6)
--- a/target/linux/ar71xx/patches-2.6.34/111-mtd-cfi_cmdset_0002-force-word-write.patch
+++ b/target/linux/ar71xx/patches-2.6.34/111-mtd-cfi_cmdset_0002-force-word-write.patch
@ -1,61 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -39,7 +39,7 @@
- #include <linux/mtd/xip.h>
- 
- #define AMD_BOOTLOC_BUG
-#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
- 
- #define MAX_WORD_RETRIES 3
- 
-@@ -54,7 +54,9 @@
- 
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -189,6 +191,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
- 
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
- {
- 	struct map_info *map = mtd->priv;
-@@ -198,6 +201,7 @@ static void fixup_use_write_buffers(stru
- 		mtd->write = cfi_amdstd_write_buffers;
- 	}
- }
-+#endif /* !FORCE_WORD_WRITE */
- 
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
-@@ -1332,6 +1336,7 @@ static int cfi_amdstd_write_words(struct
- /*
-  * FIXME: interleaved mode not tested, and probably not supported!
-  */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- 				    unsigned long adr, const u_char *buf,
- 				    int len)
-@@ -1443,7 +1448,6 @@ static int __xipram do_write_buffer(stru
- 	return ret;
- }
- 
-
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- 				    size_t *retlen, const u_char *buf)
- {
-@@ -1522,6 +1526,7 @@ static int cfi_amdstd_write_buffers(stru
- 
- 	return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
- 
- /*
-  * Handle devices with one erase region, that only implement
--- a/target/linux/ar71xx/patches-2.6.34/120-dsa-trailer-tag-validation-fix.patch
+++ b/target/linux/ar71xx/patches-2.6.34/120-dsa-trailer-tag-validation-fix.patch
@ -1,11 +0,0 @@
--- a/net/dsa/tag_trailer.c
-+++ b/net/dsa/tag_trailer.c
-@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
- 
- 	trailer = skb_tail_pointer(skb) - 4;
- 	if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
-	    (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
-+	    (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
- 		goto out_drop;
- 
- 	source_port = trailer[1] & 7;
--- a/target/linux/ar71xx/patches-2.6.34/121-dsa-add-88e6063-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.34/121-dsa-add-88e6063-driver.patch
@ -1,26 +0,0 @@
--- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060
- 	  This enables support for the Marvell 88E6060 ethernet switch
- 	  chip.
- 
-+config NET_DSA_MV88E6063
-+	bool "Marvell 88E6063 ethernet switch chip support"
-+	select NET_DSA_TAG_TRAILER
-+	---help---
-+	  This enables support for the Marvell 88E6063 ethernet switch
-+	  chip
-+
- config NET_DSA_MV88E6XXX_NEED_PPU
- 	bool
- 	default n
--- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag
- # switch drivers
- obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
- obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
- obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o
- 
--- a/target/linux/ar71xx/patches-2.6.34/122-dsa-add-qinq-tagging-format.patch
+++ b/target/linux/ar71xx/patches-2.6.34/122-dsa-add-qinq-tagging-format.patch
@ -1,79 +0,0 @@
--- a/include/linux/if_ether.h
-+++ b/include/linux/if_ether.h
-@@ -81,6 +81,7 @@
- #define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
- #define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
- #define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
-+#define ETH_P_QINQ	0x9100		/* QinQ VLAN Stacking Protocol */
- #define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
- 
- /*
--- a/net/dsa/dsa_priv.h
-+++ b/net/dsa/dsa_priv.h
-@@ -174,6 +174,9 @@ netdev_tx_t dsa_xmit(struct sk_buff *skb
- /* tag_edsa.c */
- netdev_tx_t edsa_xmit(struct sk_buff *skb, struct net_device *dev);
- 
-+/* tag_qinq.c */
-+netdev_tx_t qinq_xmit(struct sk_buff *skb, struct net_device *dev);
-+
- /* tag_trailer.c */
- netdev_tx_t trailer_xmit(struct sk_buff *skb, struct net_device *dev);
- 
--- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -23,6 +23,10 @@ config NET_DSA_TAG_TRAILER
- 	bool
- 	default n
- 
-+config NET_DSA_TAG_QINQ
-+	bool
-+	default y
-+
- 
- # switch drivers
- config NET_DSA_MV88E6XXX
--- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -1,6 +1,7 @@
- # tagging formats
- obj-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
- obj-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
-+obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qinq.o
- obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
- 
- # switch drivers
--- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -321,6 +321,19 @@ static const struct net_device_ops edsa_
- 	.ndo_do_ioctl		= dsa_slave_ioctl,
- };
- #endif
-+#ifdef CONFIG_NET_DSA_TAG_QINQ
-+static const struct net_device_ops qinq_netdev_ops = {
-+	.ndo_init		= dsa_slave_init,
-+	.ndo_open	 	= dsa_slave_open,
-+	.ndo_stop		= dsa_slave_close,
-+	.ndo_start_xmit		= qinq_xmit,
-+	.ndo_change_rx_flags	= dsa_slave_change_rx_flags,
-+	.ndo_set_rx_mode	= dsa_slave_set_rx_mode,
-+	.ndo_set_multicast_list = dsa_slave_set_rx_mode,
-+	.ndo_set_mac_address	= dsa_slave_set_mac_address,
-+	.ndo_do_ioctl		= dsa_slave_ioctl,
-+};
-+#endif
- #ifdef CONFIG_NET_DSA_TAG_TRAILER
- static const struct net_device_ops trailer_netdev_ops = {
- 	.ndo_init		= dsa_slave_init,
-@@ -366,6 +379,11 @@ dsa_slave_create(struct dsa_switch *ds, 
- 		slave_dev->netdev_ops = &edsa_netdev_ops;
- 		break;
- #endif
-+#ifdef CONFIG_NET_DSA_TAG_QINQ
-+	case htons(ETH_P_QINQ):
-+		slave_dev->netdev_ops = &qinq_netdev_ops;
-+		break;
-+#endif
- #ifdef CONFIG_NET_DSA_TAG_TRAILER
- 	case htons(ETH_P_TRAILER):
- 		slave_dev->netdev_ops = &trailer_netdev_ops;
--- a/target/linux/ar71xx/patches-2.6.34/123-dsa-add-ar7240-built-in-switch-support.patch
+++ b/target/linux/ar71xx/patches-2.6.34/123-dsa-add-ar7240-built-in-switch-support.patch
@ -1,28 +0,0 @@
--- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -29,6 +29,15 @@ config NET_DSA_TAG_QINQ
- 
- 
- # switch drivers
-+config NET_DSA_AR7240
-+	bool "Atheros AR7240 built-in ethernet switch support"
-+	depends on ATHEROS_AR71XX
-+	default n
-+	select NET_DSA_TAG_QINQ
-+	---help---
-+	  This enables support for the built-in ethernet switch of the
-+	  Atheros AR7240 SoC.
-+
- config NET_DSA_MV88E6XXX
- 	bool
- 	default n
--- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qi
- obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
- 
- # switch drivers
-+obj-$(CONFIG_NET_DSA_AR7240) += ar7240.o
- obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
- obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
--- a/target/linux/ar71xx/patches-2.6.34/140-redboot_partition_scan.patch
+++ b/target/linux/ar71xx/patches-2.6.34/140-redboot_partition_scan.patch
@ -1,54 +0,0 @@
--- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
- 	static char nullstring[] = "unallocated";
- #endif
- 
-+	buf = vmalloc(master->erasesize);
-+	if (!buf)
-+		return -ENOMEM;
-+
-+ restart:
- 	if ( directory < 0 ) {
- 		offset = master->size + directory * master->erasesize;
-		while (master->block_isbad && 
-+		while (master->block_isbad &&
- 		       master->block_isbad(master, offset)) {
- 			if (!offset) {
- 			nogood:
- 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+				vfree(buf);
- 				return -EIO;
- 			}
- 			offset -= master->erasesize;
- 		}
- 	} else {
- 		offset = directory * master->erasesize;
-		while (master->block_isbad && 
-+		while (master->block_isbad &&
- 		       master->block_isbad(master, offset)) {
- 			offset += master->erasesize;
- 			if (offset == master->size)
- 				goto nogood;
- 		}
- 	}
-	buf = vmalloc(master->erasesize);
-
-	if (!buf)
-		return -ENOMEM;
-
- 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- 	       master->name, offset);
- 
-@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
- 	}
- 	if (i == numslots) {
- 		/* Didn't find it */
-+		if (offset + master->erasesize < master->size) {
-+			/* not at the end of the flash yet, maybe next block :) */
-+			directory++;
-+			goto restart;
-+		}
- 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- 		       master->name);
- 		ret = 0;
--- a/target/linux/ar71xx/patches-2.6.34/150-drivers-link-spi-before-mtd.patch
+++ b/target/linux/ar71xx/patches-2.6.34/150-drivers-link-spi-before-mtd.patch
@ -1,12 +0,0 @@
--- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -46,8 +46,8 @@ obj-y				+= macintosh/
- obj-$(CONFIG_IDE)		+= ide/
- obj-$(CONFIG_SCSI)		+= scsi/
- obj-$(CONFIG_ATA)		+= ata/
-obj-$(CONFIG_MTD)		+= mtd/
- obj-$(CONFIG_SPI)		+= spi/
-+obj-$(CONFIG_MTD)		+= mtd/
- obj-y				+= net/
- obj-$(CONFIG_ATM)		+= atm/
- obj-$(CONFIG_FUSION)		+= message/
--- a/target/linux/ar71xx/patches-2.6.34/151-spi-add-various-flags.patch
+++ b/target/linux/ar71xx/patches-2.6.34/151-spi-add-various-flags.patch
@ -1,19 +0,0 @@
--- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -435,6 +435,8 @@ struct spi_transfer {
- 	dma_addr_t	rx_dma;
- 
- 	unsigned	cs_change:1;
-+	unsigned	verify:1;
-+	unsigned	fast_write:1;
- 	u8		bits_per_word;
- 	u16		delay_usecs;
- 	u32		speed_hz;
-@@ -476,6 +478,7 @@ struct spi_message {
- 	struct spi_device	*spi;
- 
- 	unsigned		is_dma_mapped:1;
-+	unsigned		fast_read:1;
- 
- 	/* REVISIT:  we might want a flag affecting the behavior of the
- 	 * last transfer ... allowing things like "read 16 bit length L"
--- a/target/linux/ar71xx/patches-2.6.34/152-rb4xx-spi-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.34/152-rb4xx-spi-driver.patch
@ -1,25 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -242,6 +242,12 @@ config SPI_PXA2XX
- 	  The driver can be configured to use any SSP port and additional
- 	  documentation can be found a Documentation/spi/pxa2xx.
- 
-+config SPI_RB4XX
-+	tristate "Mikrotik RB4XX SPI master"
-+	depends on SPI_MASTER && AR71XX_MACH_RB4XX
-+	help
-+	  SPI controller driver for the Mikrotik RB4xx series boards.
-+
- config SPI_S3C24XX
- 	tristate "Samsung S3C24XX series SPI"
- 	depends on ARCH_S3C2410 && EXPERIMENTAL
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -47,6 +47,7 @@ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.
- obj-$(CONFIG_SPI_SH_MSIOF)		+= spi_sh_msiof.o
- obj-$(CONFIG_SPI_STMP3XXX)		+= spi_stmp.o
- obj-$(CONFIG_SPI_NUC900)		+= spi_nuc900.o
-+obj-$(CONFIG_SPI_RB4XX)			+= rb4xx_spi.o
- 
- # special build for s3c24xx spi driver with fiq support
- spi_s3c24xx_hw-y			:= spi_s3c24xx.o
--- a/target/linux/ar71xx/patches-2.6.34/153-spi-rb4xx-cpld-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.34/153-spi-rb4xx-cpld-driver.patch
@ -1,26 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -384,6 +384,13 @@ config SPI_TLE62X0
- 	  sysfs interface, with each line presented as a kind of GPIO
- 	  exposing both switch control and diagnostic feedback.
- 
-+config SPI_RB4XX_CPLD
-+	tristate "MikroTik RB4XX CPLD driver"
-+	depends on AR71XX_MACH_RB4XX
-+	help
-+	  SPI driver for the Xilinx CPLD chip present on the
-+	  MikroTik RB4xx boards.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -56,6 +56,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
- # 	... add above this line ...
- 
- # SPI protocol drivers (device/link on bus)
-+obj-$(CONFIG_SPI_RB4XX_CPLD)	+= spi_rb4xx_cpld.o
- obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
- obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
- # 	... add above this line ...
--- a/target/linux/ar71xx/patches-2.6.34/200-rb4xx_nand_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.34/200-rb4xx_nand_driver.patch
@ -1,21 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -488,4 +488,8 @@ config MTD_NAND_W90P910
- 	  This enables the driver for the NAND Flash on evaluation board based
- 	  on w90p910.
- 
-+config MTD_NAND_RB4XX
-+	tristate "NAND flash driver for RouterBoard 4xx series"
-+	depends on MTD_NAND && AR71XX_MACH_RB4XX
-+
- endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
- obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
--- a/target/linux/ar71xx/patches-2.6.34/201-ap83_spi_controller.patch
+++ b/target/linux/ar71xx/patches-2.6.34/201-ap83_spi_controller.patch
@ -1,27 +0,0 @@
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@ endif
- obj-$(CONFIG_SPI_MASTER)		+= spi.o
- 
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AP83)			+= ap83_spi.o
- obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
- obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,14 @@ if SPI_MASTER
- 
- comment "SPI Master Controller Drivers"
- 
-+config SPI_AP83
-+	tristate "Atheros AP83 specific SPI Controller"
-+	depends on SPI_MASTER && AR71XX_MACH_AP83
-+	select SPI_BITBANG
-+	help
-+	  This is a specific SPI controller driver for the Atheros AP83
-+	  reference board.
-+
- config SPI_AR71XX
- 	tristate "Atheros AR71xx SPI Controller"
- 	depends on SPI_MASTER && ATHEROS_AR71XX
--- a/target/linux/ar71xx/patches-2.6.34/202-spi_vsc7385_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.34/202-spi_vsc7385_driver.patch
@ -1,24 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -399,6 +399,11 @@ config SPI_RB4XX_CPLD
- 	  SPI driver for the Xilinx CPLD chip present on the
- 	  MikroTik RB4xx boards.
- 
-+config SPI_VSC7385
-+	tristate "Vitesse VSC7385 ethernet switch driver"
-+	help
-+	  SPI driver for the Vitesse VSC7385 ethernet switch.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -59,6 +59,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
- # SPI protocol drivers (device/link on bus)
- obj-$(CONFIG_SPI_RB4XX_CPLD)	+= spi_rb4xx_cpld.o
- obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
-+obj-$(CONFIG_SPI_VSC7385)	+= spi_vsc7385.o
- obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
- # 	... add above this line ...
- 
--- a/target/linux/ar71xx/patches-2.6.34/203-pb44_spi_controller.patch
+++ b/target/linux/ar71xx/patches-2.6.34/203-pb44_spi_controller.patch
@ -1,27 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -68,6 +68,14 @@ config SPI_AR71XX
- 	help
- 	  This is the SPI contoller driver for Atheros AR71xx.
- 
-+config SPI_PB44
-+	tristate "Atheros PB44 board specific SPI controller"
-+	depends on SPI_MASTER && AR71XX_MACH_PB44
-+	select SPI_BITBANG
-+	help
-+	  This is a specific SPI controller driver for the Atheros PB44
-+	  reference board.
-+
- config SPI_ATMEL
- 	tristate "Atmel SPI Controller"
- 	depends on (ARCH_AT91 || AVR32)
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
- obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
- obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
- obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
-+obj-$(CONFIG_SPI_PB44)			+= pb44_spi.o
- obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
- obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
- obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
--- a/target/linux/ar71xx/patches-2.6.34/205-wndr3700-usb-led-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.34/205-wndr3700-usb-led-driver.patch
@ -1,26 +0,0 @@
--- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -294,6 +294,13 @@ config LEDS_TRIGGERS
- 
- if LEDS_TRIGGERS
- 
-+config LEDS_WNDR3700_USB
-+	tristate "NETGEAR WNDR3700 USB LED driver"
-+	depends on LEDS_CLASS && AR71XX_MACH_WNDR3700
-+	help
-+	  This option enables support for the USB LED found on the
-+	  NETGEAR WNDR3700 board.
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGER_TIMER
--- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_LEDS_DA903X)		+= leds-da903
- obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
- obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
- obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
-+obj-${CONFIG_LEDS_WNDR3700_USB}		+= leds-wndr3700-usb.o
- obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
- obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
- obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
--- a/target/linux/ar71xx/patches-2.6.34/206-nxp-74hc153-gpio-chip-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.34/206-nxp-74hc153-gpio-chip-driver.patch
@ -1,25 +0,0 @@
--- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -310,4 +310,12 @@ config GPIO_UCB1400
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called ucb1400_gpio.
- 
-+comment "Other GPIO expanders"
-+
-+config GPIO_NXP_74HC153
-+	tristate "NXP 74HC153 Dual 4-input multiplexer"
-+	help
-+	  Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
-+	  provides a GPIO interface supporting inputs.
-+
- endif
--- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_GPIO_MAX7301)	+= max7301.o
- obj-$(CONFIG_GPIO_MAX732X)	+= max732x.o
- obj-$(CONFIG_GPIO_MC33880)	+= mc33880.o
- obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
-+obj-$(CONFIG_GPIO_NXP_74HC153)	+= nxp_74hc153.o
- obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
- obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
- obj-$(CONFIG_GPIO_PL061)	+= pl061.o
--- a/target/linux/ar71xx/patches-2.6.34/207-rb750-led-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.34/207-rb750-led-driver.patch
@ -1,23 +0,0 @@
--- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -301,6 +301,10 @@ config LEDS_WNDR3700_USB
- 	  This option enables support for the USB LED found on the
- 	  NETGEAR WNDR3700 board.
- 
-+config LEDS_RB750
-+	tristate "LED driver for the Mikrotik RouterBOARD 750"
-+	depends on LEDS_CLASS && AR71XX_MACH_RB750
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGER_TIMER
--- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -36,6 +36,7 @@ obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds
- obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
- obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
- obj-$(CONFIG_LEDS_DELL_NETBOOKS)	+= dell-led.o
-+obj-$(CONFIG_LEDS_RB750)		+= leds-rb750.o
- 
- # LED SPI Drivers
- obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
--- a/target/linux/ar71xx/patches-2.6.34/208-rb750-nand-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.34/208-rb750-nand-driver.patch
@ -1,21 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -492,4 +492,8 @@ config MTD_NAND_RB4XX
- 	tristate "NAND flash driver for RouterBoard 4xx series"
- 	depends on MTD_NAND && AR71XX_MACH_RB4XX
- 
-+config MTD_NAND_RB750
-+	tristate "NAND flash driver for the RouterBoard 750"
-+	depends on MTD_NAND && AR71XX_MACH_RB750
-+
- endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx
- obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
-+obj-$(CONFIG_MTD_NAND_RB750)		+= rb750_nand.o
- obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
--- a/target/linux/ar71xx/patches-2.6.34/300-mips_fw_myloader.patch
+++ b/target/linux/ar71xx/patches-2.6.34/300-mips_fw_myloader.patch
@ -1,22 +0,0 @@
--- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -203,6 +203,7 @@ endif
- #
- libs-$(CONFIG_ARC)		+= arch/mips/fw/arc/
- libs-$(CONFIG_CFE)		+= arch/mips/fw/cfe/
-+libs-$(CONFIG_MYLOADER)		+= arch/mips/fw/myloader/
- libs-$(CONFIG_SNIPROM)		+= arch/mips/fw/sni/
- libs-y				+= arch/mips/fw/lib/
- 
--- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -879,6 +879,9 @@ config MIPS_NILE4
- config MIPS_DISABLE_OBSOLETE_IDE
- 	bool
- 
-+config MYLOADER
-+	bool
-+
- config SYNC_R4K
- 	bool
- 
--- a/target/linux/ar71xx/patches-2.6.34/901-get_c0_compare_irq_function.patch
+++ b/target/linux/ar71xx/patches-2.6.34/901-get_c0_compare_irq_function.patch
@ -1,29 +0,0 @@
--- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -51,6 +51,7 @@
- #include <asm/stacktrace.h>
- #include <asm/irq.h>
- #include <asm/uasm.h>
-+#include <asm/time.h>
- 
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1506,6 +1507,8 @@ void __cpuinit per_cpu_trap_init(void)
- 	if (cpu_has_mips_r2) {
- 		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
- 		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
-+		if (get_c0_compare_irq)
-+			cp0_compare_irq = get_c0_compare_irq();
- 		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
- 		if (cp0_perfcount_irq == cp0_compare_irq)
- 			cp0_perfcount_irq = -1;
--- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
-  */
- #ifdef CONFIG_CEVT_R4K_LIB
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- extern int r4k_clockevent_init(void);
- #endif
- 
--- a/target/linux/ar71xx/patches-2.6.35/001-ar71xx_core.patch
+++ b/target/linux/ar71xx/patches-2.6.35/001-ar71xx_core.patch
@ -1,50 +0,0 @@
--- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -181,6 +181,13 @@ ifeq (,$(findstring march=octeon, $(cfla
- cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
- endif
- 
-+#
-+# Atheros AR71xx
-+#
-+core-$(CONFIG_ATHEROS_AR71XX)	+= arch/mips/ar71xx/
-+cflags-$(CONFIG_ATHEROS_AR71XX)	+= -I$(srctree)/arch/mips/include/asm/mach-ar71xx
-+load-$(CONFIG_ATHEROS_AR71XX)	+= 0xffffffff80060000
-+
- cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
- cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
- cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
--- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -48,6 +48,23 @@ config AR7
- 	  Support for the Texas Instruments AR7 System-on-a-Chip
- 	  family: TNETD7100, 7200 and 7300.
- 
-+config ATHEROS_AR71XX
-+	bool "Atheros AR71xx based boards"
-+	select CEVT_R4K
-+	select CSRC_R4K
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select ARCH_REQUIRE_GPIOLIB
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_HAS_CPU_MIPS32_R2
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_HAS_EARLY_PRINTK
-+	select MIPS_MACHINE
-+	help
-+	  Support for Atheros AR71xx based boards.
-+
- config BCM47XX
- 	bool "Broadcom BCM47XX based boards"
- 	select CEVT_R4K
-@@ -684,6 +701,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
- endchoice
- 
- source "arch/mips/alchemy/Kconfig"
-+source "arch/mips/ar71xx/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
- source "arch/mips/lasat/Kconfig"
--- a/target/linux/ar71xx/patches-2.6.35/002-ar71xx_pci.patch
+++ b/target/linux/ar71xx/patches-2.6.35/002-ar71xx_pci.patch
@ -1,10 +0,0 @@
--- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
- obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
- 					ops-bcm63xx.o
-+obj-$(CONFIG_ATHEROS_AR71XX)	+= pci-ar71xx.o pci-ar724x.o
- 
- #
- # These are still pretty much in the old state, watch, go blind.
--- a/target/linux/ar71xx/patches-2.6.35/003-ar71xx_usb_host.patch
+++ b/target/linux/ar71xx/patches-2.6.35/003-ar71xx_usb_host.patch
@ -1,58 +0,0 @@
--- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -109,6 +109,13 @@ config XPS_USB_HCD_XILINX
- 		support both high speed and full speed devices, or high speed
- 		devices only.
- 
-+config USB_EHCI_AR71XX
-+	bool "USB EHCI support for AR71xx"
-+	depends on USB_EHCI_HCD && ATHEROS_AR71XX
-+	default y
-+	help
-+	  Support for Atheros AR71xx built-in EHCI controller
-+
- config USB_EHCI_FSL
- 	bool "Support for Freescale on-chip EHCI USB controller"
- 	depends on USB_EHCI_HCD && FSL_SOC
-@@ -222,6 +229,13 @@ config USB_OHCI_HCD_OMAP3
- 	  Enables support for the on-chip OHCI controller on
- 	  OMAP3 and later chips.
- 
-+config USB_OHCI_AR71XX
-+	bool "USB OHCI support for Atheros AR71xx"
-+	depends on USB_OHCI_HCD && ATHEROS_AR71XX
-+	default y
-+	help
-+	  Support for Atheros AR71xx built-in OHCI controller
-+
- config USB_OHCI_HCD_PPC_SOC
- 	bool "OHCI support for on-chip PPC USB controller"
- 	depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
--- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1158,6 +1158,11 @@ MODULE_LICENSE ("GPL");
- #define	PLATFORM_DRIVER		ehci_atmel_driver
- #endif
- 
-+#ifdef CONFIG_USB_EHCI_AR71XX
-+#include "ehci-ar71xx.c"
-+#define PLATFORM_DRIVER		ehci_ar71xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
-     !defined(XILINX_OF_PLATFORM_DRIVER)
--- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1095,6 +1095,11 @@ MODULE_LICENSE ("GPL");
- #define TMIO_OHCI_DRIVER	ohci_hcd_tmio_driver
- #endif
- 
-+#ifdef CONFIG_USB_OHCI_AR71XX
-+#include "ohci-ar71xx.c"
-+#define PLATFORM_DRIVER		ohci_hcd_ar71xx_driver
-+#endif
-+
- #if	!defined(PCI_DRIVER) &&		\
- 	!defined(PLATFORM_DRIVER) &&	\
- 	!defined(OMAP1_PLATFORM_DRIVER) &&	\
--- a/target/linux/ar71xx/patches-2.6.35/004-ar71xx_spi_controller.patch
+++ b/target/linux/ar71xx/patches-2.6.35/004-ar71xx_spi_controller.patch
@ -1,26 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,13 @@ if SPI_MASTER
- 
- comment "SPI Master Controller Drivers"
- 
-+config SPI_AR71XX
-+	tristate "Atheros AR71xx SPI Controller"
-+	depends on SPI_MASTER && ATHEROS_AR71XX
-+	select SPI_BITBANG
-+	help
-+	  This is the SPI contoller driver for Atheros AR71xx.
-+
- config SPI_ATMEL
- 	tristate "Atmel SPI Controller"
- 	depends on (ARCH_AT91 || AVR32)
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@ endif
- obj-$(CONFIG_SPI_MASTER)		+= spi.o
- 
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
- obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
- obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
--- a/target/linux/ar71xx/patches-2.6.35/005-ar71xx_mac_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.35/005-ar71xx_mac_driver.patch
@ -1,21 +0,0 @@
--- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2032,6 +2032,8 @@ config ACENIC_OMIT_TIGON_I
- 
- 	  The safe and default value for this is N.
- 
-+source drivers/net/ag71xx/Kconfig
-+
- config DL2K
- 	tristate "DL2000/TC902x-based Gigabit Ethernet support"
- 	depends on PCI
--- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -109,6 +109,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/
- # end link order section
- #
- 
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_SUNDANCE) += sundance.o
- obj-$(CONFIG_HAMACHI) += hamachi.o
- obj-$(CONFIG_NET) += Space.o loopback.o
--- a/target/linux/ar71xx/patches-2.6.35/006-ar71xx_wdt_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.35/006-ar71xx_wdt_driver.patch
@ -1,26 +0,0 @@
--- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -875,6 +875,13 @@ config TXX9_WDT
- 	help
- 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
- 
-+config AR71XX_WDT
-+	tristate "Atheros AR71xx Watchdog Timer"
-+	depends on ATHEROS_AR71XX
-+	help
-+	  Hardware driver for the built-in watchdog timer on the Atheros
-+	  AR71xx SoCs.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture
--- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -114,6 +114,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
- 
- # PARISC Architecture
- 
--- a/target/linux/ar71xx/patches-2.6.35/007-ar91xx_flash_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.35/007-ar91xx_flash_driver.patch
@ -1,26 +0,0 @@
--- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -251,6 +251,13 @@ config MTD_NETtel
- 	help
- 	  Support for flash chips on NETtel/SecureEdge/SnapGear boards.
- 
-+config MTD_AR91XX_FLASH
-+	tristate "Atheros AR91xx parallel flash support"
-+	depends on ATHEROS_AR71XX
-+	select MTD_COMPLEX_MAPPINGS
-+	help
-+	  Parallel flash driver for the Atheros AR91xx based boards.
-+
- config MTD_DILNETPC
- 	tristate "CFI Flash device mapped on DIL/Net PC"
- 	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
--- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
- obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)		+= pci.o
-+obj-$(CONFIG_MTD_AR91XX_FLASH)	+= ar91xx_flash.o
- obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
- obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
--- a/target/linux/ar71xx/patches-2.6.35/101-ksz8041_phy_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.35/101-ksz8041_phy_driver.patch
@ -1,24 +0,0 @@
--- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -119,6 +119,11 @@ config RTL8306_PHY
- 	tristate "Driver for Realtek RTL8306S switches"
- 	select SWCONFIG
- 
-+config MICREL_PHY
-+	tristate "Drivers for Micrel/Kendin PHYs"
-+	---help---
-+	  Currently has a driver for the KSZ8041
-+
- config FIXED_PHY
- 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- 	depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi
- obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
- obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
- obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
-+obj-$(CONFIG_MICREL)		+= micrel.o
- obj-$(CONFIG_FIXED_PHY)		+= fixed.o
- obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
- obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
--- a/target/linux/ar71xx/patches-2.6.35/102-mtd_m25p80_add_myloader_parser.patch
+++ b/target/linux/ar71xx/patches-2.6.35/102-mtd_m25p80_add_myloader_parser.patch
@ -1,19 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -928,6 +928,16 @@ static int __devinit m25p_probe(struct s
- 					part_probes, &parts, 0);
- 		}
- 
-+#ifdef CONFIG_MTD_MYLOADER_PARTS
-+		if (nr_parts <= 0) {
-+			static const char *part_probes[]
-+					= { "MyLoader", NULL, };
-+
-+			nr_parts = parse_mtd_partitions(&flash->mtd,
-+					part_probes, &parts, 0);
-+		}
-+#endif
-+
- 		if (nr_parts <= 0 && data && data->parts) {
- 			parts = data->parts;
- 			nr_parts = data->nr_parts;
--- a/target/linux/ar71xx/patches-2.6.35/104-mtd_m25p80_add_redboot_parser.patch
+++ b/target/linux/ar71xx/patches-2.6.35/104-mtd_m25p80_add_redboot_parser.patch
@ -1,18 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -938,6 +938,15 @@ static int __devinit m25p_probe(struct s
- 		}
- #endif
- 
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+		if (nr_parts <= 0) {
-+			static const char *part_probes[]
-+					= { "RedBoot", NULL, };
-+
-+			nr_parts = parse_mtd_partitions(&flash->mtd,
-+					part_probes, &parts, 0);
-+		}
-+#endif
- 		if (nr_parts <= 0 && data && data->parts) {
- 			parts = data->parts;
- 			nr_parts = data->nr_parts;
--- a/target/linux/ar71xx/patches-2.6.35/107-mtd-SST39VF6401B-support.patch
+++ b/target/linux/ar71xx/patches-2.6.35/107-mtd-SST39VF6401B-support.patch
@ -1,29 +0,0 @@
--- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -148,6 +148,7 @@
- #define SST39LF160	0x2782
- #define SST39VF1601	0x234b
- #define SST39VF3201	0x235b
-+#define SST39VF6401B	0x236d
- #define SST39WF1601	0x274b
- #define SST39WF1602	0x274a
- #define SST39LF512	0x00D4
-@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec
- 			ERASEINFO(0x10000,64),
- 		}
- 	}, {
-+		.mfr_id         = CFI_MFR_SST,
-+		.dev_id         = SST39VF6401B,
-+		.name           = "SST 39VF6401B",
-+		.devtypes       = CFI_DEVICETYPE_X16,
-+		.uaddr          = MTD_UADDR_0xAAAA_0x5555,
-+		.dev_size       = SIZE_8MiB,
-+		.cmd_set        = P_ID_AMD_STD,
-+		.nr_regions     = 1,
-+		.regions        = {
-+			ERASEINFO(0x10000,128)
-+		}
-+	}, {
- 		.mfr_id		= CFI_MFR_ST,
- 		.dev_id		= M29F800AB,
- 		.name		= "ST M29F800AB",
--- a/target/linux/ar71xx/patches-2.6.35/108-mtd_fix_cfi_cmdset_0002_status_check.patch
+++ b/target/linux/ar71xx/patches-2.6.35/108-mtd_fix_cfi_cmdset_0002_status_check.patch
@ -1,69 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1217,8 +1217,8 @@ static int __xipram do_write_oneword(str
- 			break;
- 		}
- 
-		if (chip_ready(map, adr))
-			break;
-+		if (chip_good(map, adr, datum))
-+			goto enable_xip;
- 
- 		/* Latency issues. Drop the lock, wait a while and retry */
- 		UDELAY(map, chip, adr, 1);
-@@ -1234,6 +1234,8 @@ static int __xipram do_write_oneword(str
- 
- 		ret = -EIO;
- 	}
-+
-+ enable_xip:
- 	xip_enable(map, chip, adr);
-  op_done:
- 	chip->state = FL_READY;
-@@ -1580,7 +1582,6 @@ static int cfi_amdstd_write_buffers(stru
- 	return 0;
- }
- 
-
- /*
-  * Handle devices with one erase region, that only implement
-  * the chip erase command.
-@@ -1644,8 +1645,8 @@ static int __xipram do_erase_chip(struct
- 			chip->erase_suspended = 0;
- 		}
- 
-		if (chip_ready(map, adr))
-			break;
-+		if (chip_good(map, adr, map_word_ff(map)))
-+			goto op_done;
- 
- 		if (time_after(jiffies, timeo)) {
- 			printk(KERN_WARNING "MTD %s(): software timeout\n",
-@@ -1665,6 +1666,7 @@ static int __xipram do_erase_chip(struct
- 		ret = -EIO;
- 	}
- 
-+ op_done:
- 	chip->state = FL_READY;
- 	xip_enable(map, chip, adr);
- 	put_chip(map, chip, adr);
-@@ -1732,9 +1734,9 @@ static int __xipram do_erase_oneblock(st
- 			chip->erase_suspended = 0;
- 		}
- 
-		if (chip_ready(map, adr)) {
-+		if (chip_good(map, adr, map_word_ff(map))) {
- 			xip_enable(map, chip, adr);
-			break;
-+			goto op_done;
- 		}
- 
- 		if (time_after(jiffies, timeo)) {
-@@ -1756,6 +1758,7 @@ static int __xipram do_erase_oneblock(st
- 		ret = -EIO;
- 	}
- 
-+ op_done:
- 	chip->state = FL_READY;
- 	put_chip(map, chip, adr);
- 	mutex_unlock(&chip->mutex);
--- a/target/linux/ar71xx/patches-2.6.35/109-mtd-wrt160nl-trx-parser.patch
+++ b/target/linux/ar71xx/patches-2.6.35/109-mtd-wrt160nl-trx-parser.patch
@ -1,44 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -947,6 +947,16 @@ static int __devinit m25p_probe(struct s
- 					part_probes, &parts, 0);
- 		}
- #endif
-+
-+#ifdef CONFIG_MTD_WRT160NL_PARTS
-+		if (nr_parts <= 0) {
-+			static const char *part_probes[]
-+					= { "wrt160nl", NULL, };
-+
-+			nr_parts = parse_mtd_partitions(&flash->mtd,
-+					part_probes, &parts, 0);
-+		}
-+#endif
- 		if (nr_parts <= 0 && data && data->parts) {
- 			parts = data->parts;
- 			nr_parts = data->nr_parts;
--- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -181,6 +181,12 @@ config MTD_AR7_PARTS
- 	---help---
- 	  TI AR7 partitioning support
- 
-+config MTD_WRT160NL_PARTS
-+	tristate "Linksys WRT160NL partitioning support"
-+	depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
-+	---help---
-+	   Linksys WRT160NL partitioning support
-+
- config MTD_MYLOADER_PARTS
- 	tristate "MyLoader partition parsing"
- 	depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
--- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
- obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
-+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
- obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- 
--- a/target/linux/ar71xx/patches-2.6.35/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
+++ b/target/linux/ar71xx/patches-2.6.35/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
@ -1,22 +0,0 @@
--- a/drivers/usb/host/ehci-q.c
-+++ b/drivers/usb/host/ehci-q.c
-@@ -1194,6 +1194,9 @@ static void end_unlink_async (struct ehc
- 		ehci->reclaim = NULL;
- 		start_unlink_async (ehci, next);
- 	}
-+
-+	if (ehci->has_synopsys_hc_bug)
-+		writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
- }
- 
- /* makes sure the async qh will become idle */
--- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -131,6 +131,7 @@ struct ehci_hcd {			/* one per controlle
- 	unsigned		need_io_watchdog:1;
- 	unsigned		broken_periodic:1;
- 	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
-+	unsigned		has_synopsys_hc_bug:1; /* Synopsys HC */
- 
- 	/* required for usb32 quirk */
- 	#define OHCI_CTRL_HCFS          (3 << 6)
--- a/target/linux/ar71xx/patches-2.6.35/111-mtd-cfi_cmdset_0002-force-word-write.patch
+++ b/target/linux/ar71xx/patches-2.6.35/111-mtd-cfi_cmdset_0002-force-word-write.patch
@ -1,61 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -40,7 +40,7 @@
- #include <linux/mtd/xip.h>
- 
- #define AMD_BOOTLOC_BUG
-#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
- 
- #define MAX_WORD_RETRIES 3
- 
-@@ -51,7 +51,9 @@
- 
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -187,6 +189,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
- 
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
- {
- 	struct map_info *map = mtd->priv;
-@@ -196,6 +199,7 @@ static void fixup_use_write_buffers(stru
- 		mtd->write = cfi_amdstd_write_buffers;
- 	}
- }
-+#endif /* !FORCE_WORD_WRITE */
- 
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
-@@ -1391,6 +1395,7 @@ static int cfi_amdstd_write_words(struct
- /*
-  * FIXME: interleaved mode not tested, and probably not supported!
-  */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- 				    unsigned long adr, const u_char *buf,
- 				    int len)
-@@ -1502,7 +1507,6 @@ static int __xipram do_write_buffer(stru
- 	return ret;
- }
- 
-
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- 				    size_t *retlen, const u_char *buf)
- {
-@@ -1581,6 +1585,7 @@ static int cfi_amdstd_write_buffers(stru
- 
- 	return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
- 
- /*
-  * Handle devices with one erase region, that only implement
--- a/target/linux/ar71xx/patches-2.6.35/120-dsa-trailer-tag-validation-fix.patch
+++ b/target/linux/ar71xx/patches-2.6.35/120-dsa-trailer-tag-validation-fix.patch
@ -1,11 +0,0 @@
--- a/net/dsa/tag_trailer.c
-+++ b/net/dsa/tag_trailer.c
-@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
- 
- 	trailer = skb_tail_pointer(skb) - 4;
- 	if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
-	    (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
-+	    (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
- 		goto out_drop;
- 
- 	source_port = trailer[1] & 7;
--- a/target/linux/ar71xx/patches-2.6.35/121-dsa-add-88e6063-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.35/121-dsa-add-88e6063-driver.patch
@ -1,26 +0,0 @@
--- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060
- 	  This enables support for the Marvell 88E6060 ethernet switch
- 	  chip.
- 
-+config NET_DSA_MV88E6063
-+	bool "Marvell 88E6063 ethernet switch chip support"
-+	select NET_DSA_TAG_TRAILER
-+	---help---
-+	  This enables support for the Marvell 88E6063 ethernet switch
-+	  chip
-+
- config NET_DSA_MV88E6XXX_NEED_PPU
- 	bool
- 	default n
--- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag
- # switch drivers
- obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
- obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
- obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o
- 
--- a/target/linux/ar71xx/patches-2.6.35/122-dsa-add-qinq-tagging-format.patch
+++ b/target/linux/ar71xx/patches-2.6.35/122-dsa-add-qinq-tagging-format.patch
@ -1,79 +0,0 @@
--- a/include/linux/if_ether.h
-+++ b/include/linux/if_ether.h
-@@ -81,6 +81,7 @@
- #define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
- #define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
- #define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
-+#define ETH_P_QINQ	0x9100		/* QinQ VLAN Stacking Protocol */
- #define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
- 
- /*
--- a/net/dsa/dsa_priv.h
-+++ b/net/dsa/dsa_priv.h
-@@ -174,6 +174,9 @@ netdev_tx_t dsa_xmit(struct sk_buff *skb
- /* tag_edsa.c */
- netdev_tx_t edsa_xmit(struct sk_buff *skb, struct net_device *dev);
- 
-+/* tag_qinq.c */
-+netdev_tx_t qinq_xmit(struct sk_buff *skb, struct net_device *dev);
-+
- /* tag_trailer.c */
- netdev_tx_t trailer_xmit(struct sk_buff *skb, struct net_device *dev);
- 
--- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -23,6 +23,10 @@ config NET_DSA_TAG_TRAILER
- 	bool
- 	default n
- 
-+config NET_DSA_TAG_QINQ
-+	bool
-+	default y
-+
- 
- # switch drivers
- config NET_DSA_MV88E6XXX
--- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -1,6 +1,7 @@
- # tagging formats
- obj-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
- obj-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
-+obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qinq.o
- obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
- 
- # switch drivers
--- a/net/dsa/slave.c
-+++ b/net/dsa/slave.c
-@@ -321,6 +321,19 @@ static const struct net_device_ops edsa_
- 	.ndo_do_ioctl		= dsa_slave_ioctl,
- };
- #endif
-+#ifdef CONFIG_NET_DSA_TAG_QINQ
-+static const struct net_device_ops qinq_netdev_ops = {
-+	.ndo_init		= dsa_slave_init,
-+	.ndo_open	 	= dsa_slave_open,
-+	.ndo_stop		= dsa_slave_close,
-+	.ndo_start_xmit		= qinq_xmit,
-+	.ndo_change_rx_flags	= dsa_slave_change_rx_flags,
-+	.ndo_set_rx_mode	= dsa_slave_set_rx_mode,
-+	.ndo_set_multicast_list = dsa_slave_set_rx_mode,
-+	.ndo_set_mac_address	= dsa_slave_set_mac_address,
-+	.ndo_do_ioctl		= dsa_slave_ioctl,
-+};
-+#endif
- #ifdef CONFIG_NET_DSA_TAG_TRAILER
- static const struct net_device_ops trailer_netdev_ops = {
- 	.ndo_init		= dsa_slave_init,
-@@ -366,6 +379,11 @@ dsa_slave_create(struct dsa_switch *ds, 
- 		slave_dev->netdev_ops = &edsa_netdev_ops;
- 		break;
- #endif
-+#ifdef CONFIG_NET_DSA_TAG_QINQ
-+	case htons(ETH_P_QINQ):
-+		slave_dev->netdev_ops = &qinq_netdev_ops;
-+		break;
-+#endif
- #ifdef CONFIG_NET_DSA_TAG_TRAILER
- 	case htons(ETH_P_TRAILER):
- 		slave_dev->netdev_ops = &trailer_netdev_ops;
--- a/target/linux/ar71xx/patches-2.6.35/123-dsa-add-ar7240-built-in-switch-support.patch
+++ b/target/linux/ar71xx/patches-2.6.35/123-dsa-add-ar7240-built-in-switch-support.patch
@ -1,28 +0,0 @@
--- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -29,6 +29,15 @@ config NET_DSA_TAG_QINQ
- 
- 
- # switch drivers
-+config NET_DSA_AR7240
-+	bool "Atheros AR7240 built-in ethernet switch support"
-+	depends on ATHEROS_AR71XX
-+	default n
-+	select NET_DSA_TAG_QINQ
-+	---help---
-+	  This enables support for the built-in ethernet switch of the
-+	  Atheros AR7240 SoC.
-+
- config NET_DSA_MV88E6XXX
- 	bool
- 	default n
--- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qi
- obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
- 
- # switch drivers
-+obj-$(CONFIG_NET_DSA_AR7240) += ar7240.o
- obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
- obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
--- a/target/linux/ar71xx/patches-2.6.35/140-redboot_partition_scan.patch
+++ b/target/linux/ar71xx/patches-2.6.35/140-redboot_partition_scan.patch
@ -1,54 +0,0 @@
--- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
- 	static char nullstring[] = "unallocated";
- #endif
- 
-+	buf = vmalloc(master->erasesize);
-+	if (!buf)
-+		return -ENOMEM;
-+
-+ restart:
- 	if ( directory < 0 ) {
- 		offset = master->size + directory * master->erasesize;
-		while (master->block_isbad && 
-+		while (master->block_isbad &&
- 		       master->block_isbad(master, offset)) {
- 			if (!offset) {
- 			nogood:
- 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+				vfree(buf);
- 				return -EIO;
- 			}
- 			offset -= master->erasesize;
- 		}
- 	} else {
- 		offset = directory * master->erasesize;
-		while (master->block_isbad && 
-+		while (master->block_isbad &&
- 		       master->block_isbad(master, offset)) {
- 			offset += master->erasesize;
- 			if (offset == master->size)
- 				goto nogood;
- 		}
- 	}
-	buf = vmalloc(master->erasesize);
-
-	if (!buf)
-		return -ENOMEM;
-
- 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- 	       master->name, offset);
- 
-@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
- 	}
- 	if (i == numslots) {
- 		/* Didn't find it */
-+		if (offset + master->erasesize < master->size) {
-+			/* not at the end of the flash yet, maybe next block :) */
-+			directory++;
-+			goto restart;
-+		}
- 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- 		       master->name);
- 		ret = 0;
--- a/target/linux/ar71xx/patches-2.6.35/150-drivers-link-spi-before-mtd.patch
+++ b/target/linux/ar71xx/patches-2.6.35/150-drivers-link-spi-before-mtd.patch
@ -1,12 +0,0 @@
--- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -45,8 +45,8 @@ obj-y				+= macintosh/
- obj-$(CONFIG_IDE)		+= ide/
- obj-$(CONFIG_SCSI)		+= scsi/
- obj-$(CONFIG_ATA)		+= ata/
-obj-$(CONFIG_MTD)		+= mtd/
- obj-$(CONFIG_SPI)		+= spi/
-+obj-$(CONFIG_MTD)		+= mtd/
- obj-y				+= net/
- obj-$(CONFIG_ATM)		+= atm/
- obj-$(CONFIG_FUSION)		+= message/
--- a/target/linux/ar71xx/patches-2.6.35/151-spi-add-various-flags.patch
+++ b/target/linux/ar71xx/patches-2.6.35/151-spi-add-various-flags.patch
@ -1,19 +0,0 @@
--- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -435,6 +435,8 @@ struct spi_transfer {
- 	dma_addr_t	rx_dma;
- 
- 	unsigned	cs_change:1;
-+	unsigned	verify:1;
-+	unsigned	fast_write:1;
- 	u8		bits_per_word;
- 	u16		delay_usecs;
- 	u32		speed_hz;
-@@ -476,6 +478,7 @@ struct spi_message {
- 	struct spi_device	*spi;
- 
- 	unsigned		is_dma_mapped:1;
-+	unsigned		fast_read:1;
- 
- 	/* REVISIT:  we might want a flag affecting the behavior of the
- 	 * last transfer ... allowing things like "read 16 bit length L"
--- a/target/linux/ar71xx/patches-2.6.35/152-rb4xx-spi-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.35/152-rb4xx-spi-driver.patch
@ -1,25 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -259,6 +259,12 @@ config SPI_PXA2XX
- 	  The driver can be configured to use any SSP port and additional
- 	  documentation can be found a Documentation/spi/pxa2xx.
- 
-+config SPI_RB4XX
-+	tristate "Mikrotik RB4XX SPI master"
-+	depends on SPI_MASTER && AR71XX_MACH_RB4XX
-+	help
-+	  SPI controller driver for the Mikrotik RB4xx series boards.
-+
- config SPI_S3C24XX
- 	tristate "Samsung S3C24XX series SPI"
- 	depends on ARCH_S3C2410 && EXPERIMENTAL
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -49,6 +49,7 @@ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.
- obj-$(CONFIG_SPI_SH_MSIOF)		+= spi_sh_msiof.o
- obj-$(CONFIG_SPI_STMP3XXX)		+= spi_stmp.o
- obj-$(CONFIG_SPI_NUC900)		+= spi_nuc900.o
-+obj-$(CONFIG_SPI_RB4XX)			+= rb4xx_spi.o
- 
- # special build for s3c24xx spi driver with fiq support
- spi_s3c24xx_hw-y			:= spi_s3c24xx.o
--- a/target/linux/ar71xx/patches-2.6.35/153-spi-rb4xx-cpld-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.35/153-spi-rb4xx-cpld-driver.patch
@ -1,26 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -401,6 +401,13 @@ config SPI_TLE62X0
- 	  sysfs interface, with each line presented as a kind of GPIO
- 	  exposing both switch control and diagnostic feedback.
- 
-+config SPI_RB4XX_CPLD
-+	tristate "MikroTik RB4XX CPLD driver"
-+	depends on AR71XX_MACH_RB4XX
-+	help
-+	  SPI driver for the Xilinx CPLD chip present on the
-+	  MikroTik RB4xx boards.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -58,6 +58,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
- # 	... add above this line ...
- 
- # SPI protocol drivers (device/link on bus)
-+obj-$(CONFIG_SPI_RB4XX_CPLD)	+= spi_rb4xx_cpld.o
- obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
- obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
- # 	... add above this line ...
--- a/target/linux/ar71xx/patches-2.6.35/200-rb4xx_nand_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.35/200-rb4xx_nand_driver.patch
@ -1,21 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -526,4 +526,8 @@ config MTD_NAND_NUC900
- 	  This enables the driver for the NAND Flash on evaluation board based
- 	  on w90p910 / NUC9xx.
- 
-+config MTD_NAND_RB4XX
-+	tristate "NAND flash driver for RouterBoard 4xx series"
-+	depends on MTD_NAND && AR71XX_MACH_RB4XX
-+
- endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
- obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
--- a/target/linux/ar71xx/patches-2.6.35/201-ap83_spi_controller.patch
+++ b/target/linux/ar71xx/patches-2.6.35/201-ap83_spi_controller.patch
@ -1,27 +0,0 @@
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@ endif
- obj-$(CONFIG_SPI_MASTER)		+= spi.o
- 
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AP83)			+= ap83_spi.o
- obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
- obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,14 @@ if SPI_MASTER
- 
- comment "SPI Master Controller Drivers"
- 
-+config SPI_AP83
-+	tristate "Atheros AP83 specific SPI Controller"
-+	depends on SPI_MASTER && AR71XX_MACH_AP83
-+	select SPI_BITBANG
-+	help
-+	  This is a specific SPI controller driver for the Atheros AP83
-+	  reference board.
-+
- config SPI_AR71XX
- 	tristate "Atheros AR71xx SPI Controller"
- 	depends on SPI_MASTER && ATHEROS_AR71XX
--- a/target/linux/ar71xx/patches-2.6.35/202-spi_vsc7385_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.35/202-spi_vsc7385_driver.patch
@ -1,24 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -416,6 +416,11 @@ config SPI_RB4XX_CPLD
- 	  SPI driver for the Xilinx CPLD chip present on the
- 	  MikroTik RB4xx boards.
- 
-+config SPI_VSC7385
-+	tristate "Vitesse VSC7385 ethernet switch driver"
-+	help
-+	  SPI driver for the Vitesse VSC7385 ethernet switch.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -61,6 +61,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
- # SPI protocol drivers (device/link on bus)
- obj-$(CONFIG_SPI_RB4XX_CPLD)	+= spi_rb4xx_cpld.o
- obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
-+obj-$(CONFIG_SPI_VSC7385)	+= spi_vsc7385.o
- obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
- # 	... add above this line ...
- 
--- a/target/linux/ar71xx/patches-2.6.35/203-pb44_spi_controller.patch
+++ b/target/linux/ar71xx/patches-2.6.35/203-pb44_spi_controller.patch
@ -1,27 +0,0 @@
--- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -68,6 +68,14 @@ config SPI_AR71XX
- 	help
- 	  This is the SPI contoller driver for Atheros AR71xx.
- 
-+config SPI_PB44
-+	tristate "Atheros PB44 board specific SPI controller"
-+	depends on SPI_MASTER && AR71XX_MACH_PB44
-+	select SPI_BITBANG
-+	help
-+	  This is a specific SPI controller driver for the Atheros PB44
-+	  reference board.
-+
- config SPI_ATMEL
- 	tristate "Atmel SPI Controller"
- 	depends on (ARCH_AT91 || AVR32)
--- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
- obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
- obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
- obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
-+obj-$(CONFIG_SPI_PB44)			+= pb44_spi.o
- obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
- obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
- obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
--- a/target/linux/ar71xx/patches-2.6.35/205-wndr3700-usb-led-driver.patch
+++ b/target/linux/ar71xx/patches-2.6.35/205-wndr3700-usb-led-driver.patch
@ -1,26 +0,0 @@
--- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -311,6 +311,13 @@ config LEDS_TRIGGERS
- 
- if LEDS_TRIGGERS
- 
-+config LEDS_WNDR3700_USB
-+	tristate "NETGEAR WNDR3700 USB LED driver"
-+	depends on LEDS_CLASS && AR71XX_MACH_WNDR3700
-+	help
-+	  This option enables support for the USB LED found on the
-+	  NETGEAR WNDR3700 board.
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGER_TIMER
--- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_LEDS_DA903X)		+= leds-da903
- obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
- obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
- obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
-+obj-${CONFIG_LEDS_WNDR3700_USB}		+= leds-wndr3700-usb.o
- obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
- obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
- obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
--- a/Show more
+++ b/Show more