bcm53xx: backport BCM5301X earlycon and USB VCC patches

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49166
This commit is contained in:
Rafał Miłecki 2016-04-14 05:54:20 +00:00
parent b09848cd25
commit d30766c986
8 changed files with 228 additions and 293 deletions

View file

@ -14,10 +14,6 @@ standard stuff like LEDs, buttons and UART.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 111 ++++++++++++++++++++++++++
2 files changed, 112 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile

View file

@ -0,0 +1,117 @@
From dd70ccfaa79189feaa78609d44f7c3e7fa1dc6ff Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 23 Mar 2016 16:52:47 +0100
Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers of few
devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
There are few devices that have USB power controlled using GPIO. Linux
USB host driver (bcma-hcd) already supports this by reading vcc-gpio
from DT. Set it properly for all known devices.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -139,3 +139,11 @@
&uart0 {
status = "okay";
};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -24,17 +24,6 @@
reg = <0x00000000 0x08000000>;
};
- axi@18000000 {
- usb3@23000 {
- reg = <0x00023000 0x1000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
- };
-
leds {
compatible = "gpio-leds";
@@ -97,3 +86,7 @@
&uart0 {
status = "okay";
};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -126,3 +126,8 @@
};
};
};
+
+
+&usb2 {
+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -106,3 +106,11 @@
};
};
};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -109,3 +109,7 @@
status = "okay";
clock-frequency = <125000000>;
};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -207,6 +207,20 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ usb2: usb2@21000 {
+ reg = <0x00021000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ usb3: usb3@23000 {
+ reg = <0x00023000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
};
lcpll0: lcpll0@1800c100 {

View file

@ -0,0 +1,95 @@
From 5a6516ff135555aa53c7d156cd3973b826e011f9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 6 Apr 2016 18:49:55 +0200
Subject: [PATCH] ARM: BCM5301X: Enable earlycon on tested devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This allows reporting & debugging problems occurring early in the boot
process.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -17,7 +17,7 @@
model = "Buffalo WZR-1750DHP (BCM4708)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -17,7 +17,7 @@
model = "Luxul XWC-1000 (BCM4708)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -17,7 +17,7 @@
model = "Netgear R6250 V1 (BCM4708)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -17,7 +17,7 @@
model = "SmartRG SR400ac";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -17,7 +17,7 @@
model = "Buffalo WZR-600DHP2 (BCM47081)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -17,7 +17,7 @@
model = "D-Link DIR-885L";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -18,6 +18,10 @@
/ {
interrupt-parent = <&gic>;
+ chosen {
+ stdout-path = &uart0;
+ };
+
chipcommonA {
compatible = "simple-bus";
ranges = <0x00000000 0x18000000 0x00001000>;

View file

@ -1,86 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -24,6 +24,26 @@
reg = <0x00000000 0x08000000>;
};
+ axi@18000000 {
+ usb2@21000 {
+ reg = <0x00021000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb3@23000 {
+ reg = <0x00023000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
spi {
compatible = "spi-gpio";
num-chipselects = <1>;
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -24,6 +24,26 @@
reg = <0x00000000 0x08000000>;
};
+ axi@18000000 {
+ usb2@21000 {
+ reg = <0x00021000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb3@23000 {
+ reg = <0x00023000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -24,6 +24,17 @@
reg = <0x00000000 0x08000000>;
};
+ axi@18000000 {
+ usb2@21000 {
+ reg = <0x00021000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
leds {
compatible = "gpio-leds";

View file

@ -1,192 +0,0 @@
From eb1075cc48d3c315c7403822c33da9588ab76492 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 14 Jan 2015 08:33:25 +0100
Subject: [PATCH] ARM: BCM5301X: Enable earlyprintk on tested devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 2 +-
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +-
arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 +-
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -17,7 +17,7 @@
model = "Buffalo WZR-1750DHP (BCM4708)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -17,7 +17,7 @@
model = "Netgear R6250 V1 (BCM4708)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -17,7 +17,7 @@
model = "Asus RT-N18U (BCM47081)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -17,7 +17,7 @@
model = "Buffalo WZR-600DHP2 (BCM47081)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -17,7 +17,7 @@
model = "Buffalo WZR-900DHP (BCM47081)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -17,7 +17,7 @@
model = "Netgear R8000 (BCM4709)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -17,7 +17,7 @@
model = "Asus RT-AC56U (BCM4708)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -17,7 +17,7 @@
model = "Asus RT-AC68U (BCM4708)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -17,7 +17,7 @@
model = "Luxul XWC-1000 (BCM4708)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -17,7 +17,7 @@
model = "Buffalo WXR-1900DHP";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -17,7 +17,7 @@
model = "SmartRG SR400ac";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -17,7 +17,7 @@
model = "Asus RT-AC87U";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -17,7 +17,7 @@
model = "Netgear R7000";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -17,7 +17,7 @@
model = "Linksys EA6300 V1";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -17,7 +17,7 @@
model = "D-Link DIR-885L";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -17,7 +17,7 @@
model = "Netgear R8500";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {

View file

@ -26,7 +26,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+ 0x88000000 0x18000000>;
};
axi@18000000 {
spi {
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -21,7 +21,8 @@
@ -38,7 +38,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+ 0x88000000 0x08000000>;
};
axi@18000000 {
leds {
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -21,7 +21,8 @@
@ -98,7 +98,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+ 0x88000000 0x08000000>;
};
axi@18000000 {
leds {
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -21,7 +21,8 @@
@ -134,7 +134,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+ 0x88000000 0x18000000>;
};
axi@18000000 {
leds {
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -21,7 +21,8 @@

View file

@ -5,7 +5,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -123,6 +123,12 @@
@@ -103,6 +103,12 @@
#address-cells = <1>;
#size-cells = <0>;

View file

@ -81,26 +81,31 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+};
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -138,3 +138,8 @@
@@ -128,6 +128,10 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+ clock-frequency = <125000000>;
+};
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -127,3 +127,8 @@
@@ -108,6 +108,11 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+ clock-frequency = <125000000>;
+};
+
&usb2 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -104,4 +104,5 @@