ramips: remove 2.6.3[24] support
SVN-Revision: 24562
This commit is contained in:
parent
1403850be1
commit
d2fdd1dbe1
16 changed files with 0 additions and 1174 deletions
|
@ -1,29 +0,0 @@
|
||||||
--- a/arch/mips/kernel/traps.c
|
|
||||||
+++ b/arch/mips/kernel/traps.c
|
|
||||||
@@ -48,6 +48,7 @@
|
|
||||||
#include <asm/types.h>
|
|
||||||
#include <asm/stacktrace.h>
|
|
||||||
#include <asm/irq.h>
|
|
||||||
+#include <asm/time.h>
|
|
||||||
|
|
||||||
extern void check_wait(void);
|
|
||||||
extern asmlinkage void r4k_wait(void);
|
|
||||||
@@ -1537,6 +1538,8 @@ void __cpuinit per_cpu_trap_init(void)
|
|
||||||
*/
|
|
||||||
if (cpu_has_mips_r2) {
|
|
||||||
cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
|
|
||||||
+ if (get_c0_compare_irq)
|
|
||||||
+ cp0_compare_irq = get_c0_compare_irq();
|
|
||||||
cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
|
|
||||||
if (cp0_perfcount_irq == cp0_compare_irq)
|
|
||||||
cp0_perfcount_irq = -1;
|
|
||||||
--- a/arch/mips/include/asm/time.h
|
|
||||||
+++ b/arch/mips/include/asm/time.h
|
|
||||||
@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
|
|
||||||
*/
|
|
||||||
#ifdef CONFIG_CEVT_R4K_LIB
|
|
||||||
extern unsigned int __weak get_c0_compare_int(void);
|
|
||||||
+extern unsigned int __weak get_c0_compare_irq(void);
|
|
||||||
extern int r4k_clockevent_init(void);
|
|
||||||
#endif
|
|
||||||
|
|
|
@ -1,20 +0,0 @@
|
||||||
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
|
|
||||||
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
|
|
||||||
@@ -1568,7 +1568,7 @@ static int __xipram do_erase_chip(struct
|
|
||||||
chip->erase_suspended = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
- if (chip_ready(map, adr))
|
|
||||||
+ if (chip_good(map, adr, map_word_ff(map)))
|
|
||||||
break;
|
|
||||||
|
|
||||||
if (time_after(jiffies, timeo)) {
|
|
||||||
@@ -1656,7 +1656,7 @@ static int __xipram do_erase_oneblock(st
|
|
||||||
chip->erase_suspended = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
- if (chip_ready(map, adr)) {
|
|
||||||
+ if (chip_good(map, adr, map_word_ff(map))) {
|
|
||||||
xip_enable(map, chip, adr);
|
|
||||||
break;
|
|
||||||
}
|
|
|
@ -1,58 +0,0 @@
|
||||||
--- a/arch/mips/Makefile
|
|
||||||
+++ b/arch/mips/Makefile
|
|
||||||
@@ -156,6 +156,26 @@ ifeq (,$(findstring march=octeon, $(cfla
|
|
||||||
cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
|
|
||||||
endif
|
|
||||||
|
|
||||||
+#
|
|
||||||
+# Ralink SoC common stuff
|
|
||||||
+#
|
|
||||||
+core-$(CONFIG_MIPS_RALINK) += arch/mips/ralink/common/
|
|
||||||
+cflags-$(CONFIG_MIPS_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink
|
|
||||||
+
|
|
||||||
+#
|
|
||||||
+# Ralink RT288x
|
|
||||||
+#
|
|
||||||
+core-$(CONFIG_RALINK_RT288X) += arch/mips/ralink/rt288x/
|
|
||||||
+cflags-$(CONFIG_RALINK_RT288X) += -I$(srctree)//arch/mips/include/asm/mach-ralink/rt288x
|
|
||||||
+load-$(CONFIG_RALINK_RT288X) += 0xffffffff88000000
|
|
||||||
+
|
|
||||||
+#
|
|
||||||
+# Ralink RT305x
|
|
||||||
+#
|
|
||||||
+core-$(CONFIG_RALINK_RT305X) += arch/mips/ralink/rt305x/
|
|
||||||
+cflags-$(CONFIG_RALINK_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
|
|
||||||
+load-$(CONFIG_RALINK_RT305X) += 0xffffffff80000000
|
|
||||||
+
|
|
||||||
cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
|
|
||||||
cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
|
|
||||||
cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,)
|
|
||||||
--- a/arch/mips/Kconfig
|
|
||||||
+++ b/arch/mips/Kconfig
|
|
||||||
@@ -43,6 +43,9 @@ config AR7
|
|
||||||
Support for the Texas Instruments AR7 System-on-a-Chip
|
|
||||||
family: TNETD7100, 7200 and 7300.
|
|
||||||
|
|
||||||
+config MIPS_RALINK
|
|
||||||
+ bool "Ralink MIPS SoC based boards"
|
|
||||||
+
|
|
||||||
config BASLER_EXCITE
|
|
||||||
bool "Basler eXcite smart camera"
|
|
||||||
select CEVT_R4K
|
|
||||||
@@ -679,6 +682,7 @@ source "arch/mips/bcm63xx/Kconfig"
|
|
||||||
source "arch/mips/jazz/Kconfig"
|
|
||||||
source "arch/mips/lasat/Kconfig"
|
|
||||||
source "arch/mips/pmc-sierra/Kconfig"
|
|
||||||
+source "arch/mips/ralink/Kconfig"
|
|
||||||
source "arch/mips/sgi-ip27/Kconfig"
|
|
||||||
source "arch/mips/sibyte/Kconfig"
|
|
||||||
source "arch/mips/txx9/Kconfig"
|
|
||||||
@@ -1045,7 +1049,7 @@ config BOOT_ELF32
|
|
||||||
|
|
||||||
config MIPS_L1_CACHE_SHIFT
|
|
||||||
int
|
|
||||||
- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
|
|
||||||
+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X
|
|
||||||
default "6" if MIPS_CPU_SCACHE
|
|
||||||
default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
|
|
||||||
default "5"
|
|
|
@ -1,118 +0,0 @@
|
||||||
--- a/drivers/serial/8250.c
|
|
||||||
+++ b/drivers/serial/8250.c
|
|
||||||
@@ -301,9 +301,9 @@ static const struct serial8250_config ua
|
|
||||||
},
|
|
||||||
};
|
|
||||||
|
|
||||||
-#if defined (CONFIG_SERIAL_8250_AU1X00)
|
|
||||||
+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
|
|
||||||
|
|
||||||
-/* Au1x00 UART hardware has a weird register layout */
|
|
||||||
+/* Au1x00 and RT288x UART hardware has a weird register layout */
|
|
||||||
static const u8 au_io_in_map[] = {
|
|
||||||
[UART_RX] = 0,
|
|
||||||
[UART_IER] = 2,
|
|
||||||
@@ -421,7 +421,7 @@ static unsigned int mem32_serial_in(stru
|
|
||||||
return readl(p->membase + offset);
|
|
||||||
}
|
|
||||||
|
|
||||||
-#ifdef CONFIG_SERIAL_8250_AU1X00
|
|
||||||
+#if defined(CONFIG_SERIAL_8250_AU1X00) || defined(CONFIG_SERIAL_8250_RT288X)
|
|
||||||
static unsigned int au_serial_in(struct uart_port *p, int offset)
|
|
||||||
{
|
|
||||||
offset = map_8250_in_reg(p, offset) << p->regshift;
|
|
||||||
@@ -502,7 +502,7 @@ static void set_io_from_upio(struct uart
|
|
||||||
p->serial_out = mem32_serial_out;
|
|
||||||
break;
|
|
||||||
|
|
||||||
-#ifdef CONFIG_SERIAL_8250_AU1X00
|
|
||||||
+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
|
|
||||||
case UPIO_AU:
|
|
||||||
p->serial_in = au_serial_in;
|
|
||||||
p->serial_out = au_serial_out;
|
|
||||||
@@ -534,7 +534,7 @@ serial_out_sync(struct uart_8250_port *u
|
|
||||||
switch (p->iotype) {
|
|
||||||
case UPIO_MEM:
|
|
||||||
case UPIO_MEM32:
|
|
||||||
-#ifdef CONFIG_SERIAL_8250_AU1X00
|
|
||||||
+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
|
|
||||||
case UPIO_AU:
|
|
||||||
#endif
|
|
||||||
case UPIO_DWAPB:
|
|
||||||
@@ -572,8 +572,8 @@ static inline void _serial_dl_write(stru
|
|
||||||
serial_outp(up, UART_DLM, value >> 8 & 0xff);
|
|
||||||
}
|
|
||||||
|
|
||||||
-#if defined(CONFIG_SERIAL_8250_AU1X00)
|
|
||||||
-/* Au1x00 haven't got a standard divisor latch */
|
|
||||||
+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
|
|
||||||
+/* Au1x00 and RT288x haven't got a standard divisor latch */
|
|
||||||
static int serial_dl_read(struct uart_8250_port *up)
|
|
||||||
{
|
|
||||||
if (up->port.iotype == UPIO_AU)
|
|
||||||
@@ -780,22 +780,19 @@ static int size_fifo(struct uart_8250_po
|
|
||||||
*/
|
|
||||||
static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
|
|
||||||
{
|
|
||||||
- unsigned char old_dll, old_dlm, old_lcr;
|
|
||||||
+ unsigned char old_lcr;
|
|
||||||
+ unsigned int old_dl;
|
|
||||||
unsigned int id;
|
|
||||||
|
|
||||||
old_lcr = serial_inp(p, UART_LCR);
|
|
||||||
serial_outp(p, UART_LCR, UART_LCR_DLAB);
|
|
||||||
|
|
||||||
- old_dll = serial_inp(p, UART_DLL);
|
|
||||||
- old_dlm = serial_inp(p, UART_DLM);
|
|
||||||
+ old_dl = serial_dl_read(p);
|
|
||||||
|
|
||||||
- serial_outp(p, UART_DLL, 0);
|
|
||||||
- serial_outp(p, UART_DLM, 0);
|
|
||||||
+ serial_dl_write(p, 0);
|
|
||||||
+ id = serial_dl_read(p);
|
|
||||||
|
|
||||||
- id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
|
|
||||||
-
|
|
||||||
- serial_outp(p, UART_DLL, old_dll);
|
|
||||||
- serial_outp(p, UART_DLM, old_dlm);
|
|
||||||
+ serial_dl_write(p, old_dl);
|
|
||||||
serial_outp(p, UART_LCR, old_lcr);
|
|
||||||
|
|
||||||
return id;
|
|
||||||
@@ -1217,7 +1214,7 @@ static void autoconfig(struct uart_8250_
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
-#ifdef CONFIG_SERIAL_8250_AU1X00
|
|
||||||
+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
|
|
||||||
/* if access method is AU, it is a 16550 with a quirk */
|
|
||||||
if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
|
|
||||||
up->bugs |= UART_BUG_NOMSR;
|
|
||||||
--- a/drivers/serial/Kconfig
|
|
||||||
+++ b/drivers/serial/Kconfig
|
|
||||||
@@ -266,6 +266,14 @@ config SERIAL_8250_AU1X00
|
|
||||||
say Y to this option. The driver can handle up to 4 serial ports,
|
|
||||||
depending on the SOC. If unsure, say N.
|
|
||||||
|
|
||||||
+config SERIAL_8250_RT288X
|
|
||||||
+ bool "Ralink RT288x/RT305x serial port support"
|
|
||||||
+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X)
|
|
||||||
+ help
|
|
||||||
+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
|
|
||||||
+ serial port, say Y to this option. The driver can handle up to 2 serial
|
|
||||||
+ ports. If unsure, say N.
|
|
||||||
+
|
|
||||||
config SERIAL_8250_RM9K
|
|
||||||
bool "Support for MIPS RM9xxx integrated serial port"
|
|
||||||
depends on SERIAL_8250 != n && SERIAL_RM9000
|
|
||||||
--- a/include/linux/serial_core.h
|
|
||||||
+++ b/include/linux/serial_core.h
|
|
||||||
@@ -281,7 +281,7 @@ struct uart_port {
|
|
||||||
#define UPIO_HUB6 (1)
|
|
||||||
#define UPIO_MEM (2)
|
|
||||||
#define UPIO_MEM32 (3)
|
|
||||||
-#define UPIO_AU (4) /* Au1x00 type IO */
|
|
||||||
+#define UPIO_AU (4) /* Au1x00 and RT288x type IO */
|
|
||||||
#define UPIO_TSI (5) /* Tsi108/109 type IO */
|
|
||||||
#define UPIO_DWAPB (6) /* DesignWare APB UART */
|
|
||||||
#define UPIO_RM9000 (7) /* RM9000 type IO */
|
|
|
@ -1,10 +0,0 @@
|
||||||
--- a/arch/mips/pci/Makefile
|
|
||||||
+++ b/arch/mips/pci/Makefile
|
|
||||||
@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capc
|
|
||||||
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
|
|
||||||
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
|
|
||||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
|
|
||||||
+obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o
|
|
||||||
|
|
||||||
ifdef CONFIG_PCI_MSI
|
|
||||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
|
|
|
@ -1,25 +0,0 @@
|
||||||
--- a/drivers/net/Kconfig
|
|
||||||
+++ b/drivers/net/Kconfig
|
|
||||||
@@ -602,6 +602,12 @@ config MIPS_AU1X00_ENET
|
|
||||||
If you have an Alchemy Semi AU1X00 based system
|
|
||||||
say Y. Otherwise, say N.
|
|
||||||
|
|
||||||
+config MIPS_RAMIPS_NET
|
|
||||||
+ tristate "Ethernet driver for rt288x/rt305x"
|
|
||||||
+ depends on MIPS_RALINK
|
|
||||||
+ help
|
|
||||||
+ This driver supports the etehrnet mac inside the ralink wisocs
|
|
||||||
+
|
|
||||||
config SGI_IOC3_ETH
|
|
||||||
bool "SGI IOC3 Ethernet"
|
|
||||||
depends on PCI && SGI_IP27
|
|
||||||
--- a/drivers/net/Makefile
|
|
||||||
+++ b/drivers/net/Makefile
|
|
||||||
@@ -217,6 +217,7 @@ obj-$(CONFIG_KORINA) += korina.o
|
|
||||||
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
|
|
||||||
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
|
|
||||||
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
|
|
||||||
+obj-$(CONFIG_MIPS_RAMIPS_NET) += ramips.o
|
|
||||||
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
|
|
||||||
obj-$(CONFIG_DECLANCE) += declance.o
|
|
||||||
obj-$(CONFIG_ATARILANCE) += atarilance.o
|
|
|
@ -1,29 +0,0 @@
|
||||||
--- a/arch/mips/kernel/traps.c
|
|
||||||
+++ b/arch/mips/kernel/traps.c
|
|
||||||
@@ -51,6 +51,7 @@
|
|
||||||
#include <asm/stacktrace.h>
|
|
||||||
#include <asm/irq.h>
|
|
||||||
#include <asm/uasm.h>
|
|
||||||
+#include <asm/time.h>
|
|
||||||
|
|
||||||
extern void check_wait(void);
|
|
||||||
extern asmlinkage void r4k_wait(void);
|
|
||||||
@@ -1506,6 +1507,8 @@ void __cpuinit per_cpu_trap_init(void)
|
|
||||||
if (cpu_has_mips_r2) {
|
|
||||||
cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
|
|
||||||
cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
|
|
||||||
+ if (get_c0_compare_irq)
|
|
||||||
+ cp0_compare_irq = get_c0_compare_irq();
|
|
||||||
cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
|
|
||||||
if (cp0_perfcount_irq == cp0_compare_irq)
|
|
||||||
cp0_perfcount_irq = -1;
|
|
||||||
--- a/arch/mips/include/asm/time.h
|
|
||||||
+++ b/arch/mips/include/asm/time.h
|
|
||||||
@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
|
|
||||||
*/
|
|
||||||
#ifdef CONFIG_CEVT_R4K_LIB
|
|
||||||
extern unsigned int __weak get_c0_compare_int(void);
|
|
||||||
+extern unsigned int __weak get_c0_compare_irq(void);
|
|
||||||
extern int r4k_clockevent_init(void);
|
|
||||||
#endif
|
|
||||||
|
|
|
@ -1,20 +0,0 @@
|
||||||
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
|
|
||||||
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
|
|
||||||
@@ -1557,7 +1557,7 @@ static int __xipram do_erase_chip(struct
|
|
||||||
chip->erase_suspended = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
- if (chip_ready(map, adr))
|
|
||||||
+ if (chip_good(map, adr, map_word_ff(map)))
|
|
||||||
break;
|
|
||||||
|
|
||||||
if (time_after(jiffies, timeo)) {
|
|
||||||
@@ -1645,7 +1645,7 @@ static int __xipram do_erase_oneblock(st
|
|
||||||
chip->erase_suspended = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
- if (chip_ready(map, adr)) {
|
|
||||||
+ if (chip_good(map, adr, map_word_ff(map))) {
|
|
||||||
xip_enable(map, chip, adr);
|
|
||||||
break;
|
|
||||||
}
|
|
|
@ -1,58 +0,0 @@
|
||||||
--- a/arch/mips/Makefile
|
|
||||||
+++ b/arch/mips/Makefile
|
|
||||||
@@ -181,6 +181,26 @@ ifeq (,$(findstring march=octeon, $(cfla
|
|
||||||
cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
|
|
||||||
endif
|
|
||||||
|
|
||||||
+#
|
|
||||||
+# Ralink SoC common stuff
|
|
||||||
+#
|
|
||||||
+core-$(CONFIG_MIPS_RALINK) += arch/mips/ralink/common/
|
|
||||||
+cflags-$(CONFIG_MIPS_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink
|
|
||||||
+
|
|
||||||
+#
|
|
||||||
+# Ralink RT288x
|
|
||||||
+#
|
|
||||||
+core-$(CONFIG_RALINK_RT288X) += arch/mips/ralink/rt288x/
|
|
||||||
+cflags-$(CONFIG_RALINK_RT288X) += -I$(srctree)//arch/mips/include/asm/mach-ralink/rt288x
|
|
||||||
+load-$(CONFIG_RALINK_RT288X) += 0xffffffff88000000
|
|
||||||
+
|
|
||||||
+#
|
|
||||||
+# Ralink RT305x
|
|
||||||
+#
|
|
||||||
+core-$(CONFIG_RALINK_RT305X) += arch/mips/ralink/rt305x/
|
|
||||||
+cflags-$(CONFIG_RALINK_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
|
|
||||||
+load-$(CONFIG_RALINK_RT305X) += 0xffffffff80000000
|
|
||||||
+
|
|
||||||
cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
|
|
||||||
cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
|
|
||||||
cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,)
|
|
||||||
--- a/arch/mips/Kconfig
|
|
||||||
+++ b/arch/mips/Kconfig
|
|
||||||
@@ -48,6 +48,9 @@ config AR7
|
|
||||||
Support for the Texas Instruments AR7 System-on-a-Chip
|
|
||||||
family: TNETD7100, 7200 and 7300.
|
|
||||||
|
|
||||||
+config MIPS_RALINK
|
|
||||||
+ bool "Ralink MIPS SoC based boards"
|
|
||||||
+
|
|
||||||
config BCM47XX
|
|
||||||
bool "Broadcom BCM47XX based boards"
|
|
||||||
select CEVT_R4K
|
|
||||||
@@ -688,6 +691,7 @@ source "arch/mips/bcm63xx/Kconfig"
|
|
||||||
source "arch/mips/jazz/Kconfig"
|
|
||||||
source "arch/mips/lasat/Kconfig"
|
|
||||||
source "arch/mips/pmc-sierra/Kconfig"
|
|
||||||
+source "arch/mips/ralink/Kconfig"
|
|
||||||
source "arch/mips/powertv/Kconfig"
|
|
||||||
source "arch/mips/sgi-ip27/Kconfig"
|
|
||||||
source "arch/mips/sibyte/Kconfig"
|
|
||||||
@@ -1044,7 +1048,7 @@ config BOOT_ELF32
|
|
||||||
|
|
||||||
config MIPS_L1_CACHE_SHIFT
|
|
||||||
int
|
|
||||||
- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
|
|
||||||
+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X
|
|
||||||
default "6" if MIPS_CPU_SCACHE
|
|
||||||
default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
|
|
||||||
default "5"
|
|
|
@ -1,118 +0,0 @@
|
||||||
--- a/drivers/serial/8250.c
|
|
||||||
+++ b/drivers/serial/8250.c
|
|
||||||
@@ -302,9 +302,9 @@ static const struct serial8250_config ua
|
|
||||||
},
|
|
||||||
};
|
|
||||||
|
|
||||||
-#if defined (CONFIG_SERIAL_8250_AU1X00)
|
|
||||||
+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
|
|
||||||
|
|
||||||
-/* Au1x00 UART hardware has a weird register layout */
|
|
||||||
+/* Au1x00 and RT288x UART hardware has a weird register layout */
|
|
||||||
static const u8 au_io_in_map[] = {
|
|
||||||
[UART_RX] = 0,
|
|
||||||
[UART_IER] = 2,
|
|
||||||
@@ -422,7 +422,7 @@ static unsigned int mem32_serial_in(stru
|
|
||||||
return readl(p->membase + offset);
|
|
||||||
}
|
|
||||||
|
|
||||||
-#ifdef CONFIG_SERIAL_8250_AU1X00
|
|
||||||
+#if defined(CONFIG_SERIAL_8250_AU1X00) || defined(CONFIG_SERIAL_8250_RT288X)
|
|
||||||
static unsigned int au_serial_in(struct uart_port *p, int offset)
|
|
||||||
{
|
|
||||||
offset = map_8250_in_reg(p, offset) << p->regshift;
|
|
||||||
@@ -503,7 +503,7 @@ static void set_io_from_upio(struct uart
|
|
||||||
p->serial_out = mem32_serial_out;
|
|
||||||
break;
|
|
||||||
|
|
||||||
-#ifdef CONFIG_SERIAL_8250_AU1X00
|
|
||||||
+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
|
|
||||||
case UPIO_AU:
|
|
||||||
p->serial_in = au_serial_in;
|
|
||||||
p->serial_out = au_serial_out;
|
|
||||||
@@ -535,7 +535,7 @@ serial_out_sync(struct uart_8250_port *u
|
|
||||||
switch (p->iotype) {
|
|
||||||
case UPIO_MEM:
|
|
||||||
case UPIO_MEM32:
|
|
||||||
-#ifdef CONFIG_SERIAL_8250_AU1X00
|
|
||||||
+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
|
|
||||||
case UPIO_AU:
|
|
||||||
#endif
|
|
||||||
case UPIO_DWAPB:
|
|
||||||
@@ -573,8 +573,8 @@ static inline void _serial_dl_write(stru
|
|
||||||
serial_outp(up, UART_DLM, value >> 8 & 0xff);
|
|
||||||
}
|
|
||||||
|
|
||||||
-#if defined(CONFIG_SERIAL_8250_AU1X00)
|
|
||||||
-/* Au1x00 haven't got a standard divisor latch */
|
|
||||||
+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
|
|
||||||
+/* Au1x00 and RT288x haven't got a standard divisor latch */
|
|
||||||
static int serial_dl_read(struct uart_8250_port *up)
|
|
||||||
{
|
|
||||||
if (up->port.iotype == UPIO_AU)
|
|
||||||
@@ -781,22 +781,19 @@ static int size_fifo(struct uart_8250_po
|
|
||||||
*/
|
|
||||||
static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
|
|
||||||
{
|
|
||||||
- unsigned char old_dll, old_dlm, old_lcr;
|
|
||||||
+ unsigned char old_lcr;
|
|
||||||
+ unsigned int old_dl;
|
|
||||||
unsigned int id;
|
|
||||||
|
|
||||||
old_lcr = serial_inp(p, UART_LCR);
|
|
||||||
serial_outp(p, UART_LCR, UART_LCR_DLAB);
|
|
||||||
|
|
||||||
- old_dll = serial_inp(p, UART_DLL);
|
|
||||||
- old_dlm = serial_inp(p, UART_DLM);
|
|
||||||
+ old_dl = serial_dl_read(p);
|
|
||||||
|
|
||||||
- serial_outp(p, UART_DLL, 0);
|
|
||||||
- serial_outp(p, UART_DLM, 0);
|
|
||||||
+ serial_dl_write(p, 0);
|
|
||||||
+ id = serial_dl_read(p);
|
|
||||||
|
|
||||||
- id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
|
|
||||||
-
|
|
||||||
- serial_outp(p, UART_DLL, old_dll);
|
|
||||||
- serial_outp(p, UART_DLM, old_dlm);
|
|
||||||
+ serial_dl_write(p, old_dl);
|
|
||||||
serial_outp(p, UART_LCR, old_lcr);
|
|
||||||
|
|
||||||
return id;
|
|
||||||
@@ -2596,7 +2593,7 @@ static void serial8250_config_port(struc
|
|
||||||
if (flags & UART_CONFIG_TYPE)
|
|
||||||
autoconfig(up, probeflags);
|
|
||||||
|
|
||||||
-#ifdef CONFIG_SERIAL_8250_AU1X00
|
|
||||||
+#if defined (CONFIG_SERIAL_8250_AU1X00) || defined (CONFIG_SERIAL_8250_RT288X)
|
|
||||||
/* if access method is AU, it is a 16550 with a quirk */
|
|
||||||
if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
|
|
||||||
up->bugs |= UART_BUG_NOMSR;
|
|
||||||
--- a/drivers/serial/Kconfig
|
|
||||||
+++ b/drivers/serial/Kconfig
|
|
||||||
@@ -266,6 +266,14 @@ config SERIAL_8250_AU1X00
|
|
||||||
say Y to this option. The driver can handle up to 4 serial ports,
|
|
||||||
depending on the SOC. If unsure, say N.
|
|
||||||
|
|
||||||
+config SERIAL_8250_RT288X
|
|
||||||
+ bool "Ralink RT288x/RT305x serial port support"
|
|
||||||
+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X)
|
|
||||||
+ help
|
|
||||||
+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
|
|
||||||
+ serial port, say Y to this option. The driver can handle up to 2 serial
|
|
||||||
+ ports. If unsure, say N.
|
|
||||||
+
|
|
||||||
config SERIAL_8250_RM9K
|
|
||||||
bool "Support for MIPS RM9xxx integrated serial port"
|
|
||||||
depends on SERIAL_8250 != n && SERIAL_RM9000
|
|
||||||
--- a/include/linux/serial_core.h
|
|
||||||
+++ b/include/linux/serial_core.h
|
|
||||||
@@ -284,7 +284,7 @@ struct uart_port {
|
|
||||||
#define UPIO_HUB6 (1)
|
|
||||||
#define UPIO_MEM (2)
|
|
||||||
#define UPIO_MEM32 (3)
|
|
||||||
-#define UPIO_AU (4) /* Au1x00 type IO */
|
|
||||||
+#define UPIO_AU (4) /* Au1x00 and RT288x type IO */
|
|
||||||
#define UPIO_TSI (5) /* Tsi108/109 type IO */
|
|
||||||
#define UPIO_DWAPB (6) /* DesignWare APB UART */
|
|
||||||
#define UPIO_RM9000 (7) /* RM9000 type IO */
|
|
|
@ -1,10 +0,0 @@
|
||||||
--- a/arch/mips/pci/Makefile
|
|
||||||
+++ b/arch/mips/pci/Makefile
|
|
||||||
@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capc
|
|
||||||
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
|
|
||||||
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
|
|
||||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
|
|
||||||
+obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o
|
|
||||||
|
|
||||||
ifdef CONFIG_PCI_MSI
|
|
||||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
|
|
|
@ -1,25 +0,0 @@
|
||||||
--- a/drivers/net/Kconfig
|
|
||||||
+++ b/drivers/net/Kconfig
|
|
||||||
@@ -614,6 +614,12 @@ config MIPS_AU1X00_ENET
|
|
||||||
If you have an Alchemy Semi AU1X00 based system
|
|
||||||
say Y. Otherwise, say N.
|
|
||||||
|
|
||||||
+config MIPS_RAMIPS_NET
|
|
||||||
+ tristate "Ethernet driver for rt288x/rt305x"
|
|
||||||
+ depends on MIPS_RALINK
|
|
||||||
+ help
|
|
||||||
+ This driver supports the etehrnet mac inside the ralink wisocs
|
|
||||||
+
|
|
||||||
config SGI_IOC3_ETH
|
|
||||||
bool "SGI IOC3 Ethernet"
|
|
||||||
depends on PCI && SGI_IP27
|
|
||||||
--- a/drivers/net/Makefile
|
|
||||||
+++ b/drivers/net/Makefile
|
|
||||||
@@ -222,6 +222,7 @@ obj-$(CONFIG_KORINA) += korina.o
|
|
||||||
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
|
|
||||||
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
|
|
||||||
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
|
|
||||||
+obj-$(CONFIG_MIPS_RAMIPS_NET) += ramips.o
|
|
||||||
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
|
|
||||||
obj-$(CONFIG_DECLANCE) += declance.o
|
|
||||||
obj-$(CONFIG_ATARILANCE) += atarilance.o
|
|
|
@ -1,160 +0,0 @@
|
||||||
CONFIG_32BIT=y
|
|
||||||
# CONFIG_64BIT is not set
|
|
||||||
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
|
|
||||||
# CONFIG_AR7 is not set
|
|
||||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
||||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
||||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
|
||||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
||||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
|
||||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
||||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
||||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
||||||
# CONFIG_BCM47XX is not set
|
|
||||||
# CONFIG_BCM63XX is not set
|
|
||||||
CONFIG_BITREVERSE=y
|
|
||||||
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
|
|
||||||
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
|
|
||||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
||||||
CONFIG_CEVT_R4K=y
|
|
||||||
CONFIG_CEVT_R4K_LIB=y
|
|
||||||
CONFIG_CFG80211_DEFAULT_PS_VALUE=0
|
|
||||||
CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
|
|
||||||
# CONFIG_CPU_BIG_ENDIAN is not set
|
|
||||||
# CONFIG_CPU_CAVIUM_OCTEON is not set
|
|
||||||
CONFIG_CPU_HAS_PREFETCH=y
|
|
||||||
CONFIG_CPU_HAS_SYNC=y
|
|
||||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
|
||||||
# CONFIG_CPU_LOONGSON2E is not set
|
|
||||||
CONFIG_CPU_MIPS32=y
|
|
||||||
# CONFIG_CPU_MIPS32_R1 is not set
|
|
||||||
CONFIG_CPU_MIPS32_R2=y
|
|
||||||
# CONFIG_CPU_MIPS64_R1 is not set
|
|
||||||
# CONFIG_CPU_MIPS64_R2 is not set
|
|
||||||
CONFIG_CPU_MIPSR2=y
|
|
||||||
# CONFIG_CPU_NEVADA is not set
|
|
||||||
# CONFIG_CPU_R10000 is not set
|
|
||||||
# CONFIG_CPU_R3000 is not set
|
|
||||||
# CONFIG_CPU_R4300 is not set
|
|
||||||
# CONFIG_CPU_R4X00 is not set
|
|
||||||
# CONFIG_CPU_R5000 is not set
|
|
||||||
# CONFIG_CPU_R5432 is not set
|
|
||||||
# CONFIG_CPU_R5500 is not set
|
|
||||||
# CONFIG_CPU_R6000 is not set
|
|
||||||
# CONFIG_CPU_R8000 is not set
|
|
||||||
# CONFIG_CPU_RM7000 is not set
|
|
||||||
# CONFIG_CPU_RM9000 is not set
|
|
||||||
# CONFIG_CPU_SB1 is not set
|
|
||||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
||||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
||||||
# CONFIG_CPU_TX39XX is not set
|
|
||||||
# CONFIG_CPU_TX49XX is not set
|
|
||||||
# CONFIG_CPU_VR41XX is not set
|
|
||||||
CONFIG_CSRC_R4K=y
|
|
||||||
CONFIG_CSRC_R4K_LIB=y
|
|
||||||
CONFIG_DECOMPRESS_LZMA=y
|
|
||||||
CONFIG_DEVPORT=y
|
|
||||||
# CONFIG_DM9000 is not set
|
|
||||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
|
||||||
CONFIG_DMA_NONCOHERENT=y
|
|
||||||
CONFIG_EARLY_PRINTK=y
|
|
||||||
# CONFIG_FSNOTIFY is not set
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
||||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
|
||||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
|
||||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
||||||
CONFIG_GENERIC_GPIO=y
|
|
||||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
|
||||||
CONFIG_GPIOLIB=y
|
|
||||||
CONFIG_GPIO_SYSFS=y
|
|
||||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
|
||||||
CONFIG_HAS_DMA=y
|
|
||||||
CONFIG_HAS_IOMEM=y
|
|
||||||
CONFIG_HAS_IOPORT=y
|
|
||||||
CONFIG_HAVE_ARCH_KGDB=y
|
|
||||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
|
||||||
CONFIG_HAVE_IDE=y
|
|
||||||
CONFIG_HAVE_OPROFILE=y
|
|
||||||
CONFIG_HW_HAS_PCI=y
|
|
||||||
CONFIG_HW_RANDOM=m
|
|
||||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
|
||||||
CONFIG_INITRAMFS_SOURCE=""
|
|
||||||
CONFIG_IRQ_CPU=y
|
|
||||||
# CONFIG_LEDS_GPIO is not set
|
|
||||||
# CONFIG_MACH_ALCHEMY is not set
|
|
||||||
# CONFIG_MACH_DECSTATION is not set
|
|
||||||
# CONFIG_MACH_JAZZ is not set
|
|
||||||
# CONFIG_MACH_LOONGSON is not set
|
|
||||||
# CONFIG_MACH_TX39XX is not set
|
|
||||||
# CONFIG_MACH_TX49XX is not set
|
|
||||||
# CONFIG_MACH_VR41XX is not set
|
|
||||||
# CONFIG_MII is not set
|
|
||||||
# CONFIG_MIKROTIK_RB532 is not set
|
|
||||||
CONFIG_MIPS=y
|
|
||||||
# CONFIG_MIPS_COBALT is not set
|
|
||||||
CONFIG_MIPS_L1_CACHE_SHIFT=4
|
|
||||||
CONFIG_MIPS_MACHINE=y
|
|
||||||
# CONFIG_MIPS_MALTA is not set
|
|
||||||
CONFIG_MIPS_MT_DISABLED=y
|
|
||||||
# CONFIG_MIPS_MT_SMP is not set
|
|
||||||
# CONFIG_MIPS_MT_SMTC is not set
|
|
||||||
CONFIG_MIPS_RALINK=y
|
|
||||||
CONFIG_MIPS_RAMIPS_NET=y
|
|
||||||
# CONFIG_MIPS_SIM is not set
|
|
||||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
|
||||||
CONFIG_MTD_CMDLINE_PARTS=y
|
|
||||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
||||||
CONFIG_MTD_PHYSMAP=y
|
|
||||||
# CONFIG_NO_IOPORT is not set
|
|
||||||
# CONFIG_NXP_STB220 is not set
|
|
||||||
# CONFIG_NXP_STB225 is not set
|
|
||||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
|
||||||
CONFIG_PCI=y
|
|
||||||
CONFIG_PCI_DOMAINS=y
|
|
||||||
CONFIG_PHYLIB=y
|
|
||||||
# CONFIG_PMC_MSP is not set
|
|
||||||
# CONFIG_PMC_YOSEMITE is not set
|
|
||||||
# CONFIG_PNX8550_JBS is not set
|
|
||||||
# CONFIG_PNX8550_STB810 is not set
|
|
||||||
CONFIG_RALINK_DEV_GPIO_BUTTONS=y
|
|
||||||
CONFIG_RALINK_DEV_GPIO_LEDS=y
|
|
||||||
CONFIG_RALINK_RT288X=y
|
|
||||||
# CONFIG_RALINK_RT305X is not set
|
|
||||||
CONFIG_RT288X_MACH_RT_N15=y
|
|
||||||
CONFIG_RT288X_MACH_WZR_AGL300NH=y
|
|
||||||
CONFIG_RTL8366S_PHY=y
|
|
||||||
CONFIG_RTL8366_SMI=y
|
|
||||||
CONFIG_SCHED_OMIT_FRAME_POINTER=y
|
|
||||||
# CONFIG_SCSI_DMA is not set
|
|
||||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
|
||||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
|
||||||
CONFIG_SERIAL_8250_RT288X=y
|
|
||||||
# CONFIG_SGI_IP22 is not set
|
|
||||||
# CONFIG_SGI_IP27 is not set
|
|
||||||
# CONFIG_SGI_IP28 is not set
|
|
||||||
# CONFIG_SGI_IP32 is not set
|
|
||||||
# CONFIG_SIBYTE_BIGSUR is not set
|
|
||||||
# CONFIG_SIBYTE_CARMEL is not set
|
|
||||||
# CONFIG_SIBYTE_CRHINE is not set
|
|
||||||
# CONFIG_SIBYTE_CRHONE is not set
|
|
||||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
|
||||||
# CONFIG_SIBYTE_RHONE is not set
|
|
||||||
# CONFIG_SIBYTE_SENTOSA is not set
|
|
||||||
# CONFIG_SIBYTE_SWARM is not set
|
|
||||||
# CONFIG_SLAB is not set
|
|
||||||
CONFIG_SLUB=y
|
|
||||||
CONFIG_SOC_RT288X=y
|
|
||||||
CONFIG_SWCONFIG=y
|
|
||||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
||||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
|
||||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
|
||||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
||||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
||||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
||||||
# CONFIG_TC35815 is not set
|
|
||||||
CONFIG_TRAD_SIGNALS=y
|
|
||||||
# CONFIG_TREE_PREEMPT_RCU is not set
|
|
||||||
CONFIG_TREE_RCU=y
|
|
||||||
CONFIG_USB_SUPPORT=y
|
|
||||||
CONFIG_ZONE_DMA_FLAG=0
|
|
|
@ -1,171 +0,0 @@
|
||||||
CONFIG_32BIT=y
|
|
||||||
# CONFIG_64BIT is not set
|
|
||||||
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
|
|
||||||
# CONFIG_AR7 is not set
|
|
||||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
||||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
||||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
|
||||||
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
|
|
||||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
||||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
|
||||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
||||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
||||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
||||||
# CONFIG_BCM47XX is not set
|
|
||||||
# CONFIG_BCM63XX is not set
|
|
||||||
CONFIG_BITREVERSE=y
|
|
||||||
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
|
|
||||||
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
|
|
||||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
||||||
CONFIG_CEVT_R4K=y
|
|
||||||
CONFIG_CEVT_R4K_LIB=y
|
|
||||||
CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
|
|
||||||
CONFIG_CMDLINE_BOOL=y
|
|
||||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
|
||||||
# CONFIG_CPU_BIG_ENDIAN is not set
|
|
||||||
# CONFIG_CPU_CAVIUM_OCTEON is not set
|
|
||||||
CONFIG_CPU_HAS_PREFETCH=y
|
|
||||||
CONFIG_CPU_HAS_SYNC=y
|
|
||||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
|
||||||
# CONFIG_CPU_LOONGSON2E is not set
|
|
||||||
# CONFIG_CPU_LOONGSON2F is not set
|
|
||||||
CONFIG_CPU_MIPS32=y
|
|
||||||
# CONFIG_CPU_MIPS32_R1 is not set
|
|
||||||
CONFIG_CPU_MIPS32_R2=y
|
|
||||||
# CONFIG_CPU_MIPS64_R1 is not set
|
|
||||||
# CONFIG_CPU_MIPS64_R2 is not set
|
|
||||||
CONFIG_CPU_MIPSR2=y
|
|
||||||
# CONFIG_CPU_NEVADA is not set
|
|
||||||
# CONFIG_CPU_R10000 is not set
|
|
||||||
# CONFIG_CPU_R3000 is not set
|
|
||||||
# CONFIG_CPU_R4300 is not set
|
|
||||||
# CONFIG_CPU_R4X00 is not set
|
|
||||||
# CONFIG_CPU_R5000 is not set
|
|
||||||
# CONFIG_CPU_R5432 is not set
|
|
||||||
# CONFIG_CPU_R5500 is not set
|
|
||||||
# CONFIG_CPU_R6000 is not set
|
|
||||||
# CONFIG_CPU_R8000 is not set
|
|
||||||
# CONFIG_CPU_RM7000 is not set
|
|
||||||
# CONFIG_CPU_RM9000 is not set
|
|
||||||
# CONFIG_CPU_SB1 is not set
|
|
||||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
||||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
||||||
# CONFIG_CPU_TX39XX is not set
|
|
||||||
# CONFIG_CPU_TX49XX is not set
|
|
||||||
# CONFIG_CPU_VR41XX is not set
|
|
||||||
CONFIG_CSRC_R4K=y
|
|
||||||
CONFIG_CSRC_R4K_LIB=y
|
|
||||||
CONFIG_DECOMPRESS_LZMA=y
|
|
||||||
CONFIG_DEVPORT=y
|
|
||||||
# CONFIG_DM9000 is not set
|
|
||||||
CONFIG_DMA_NONCOHERENT=y
|
|
||||||
CONFIG_EARLY_PRINTK=y
|
|
||||||
# CONFIG_FSNOTIFY is not set
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
||||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
|
||||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
|
||||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
||||||
CONFIG_GENERIC_GPIO=y
|
|
||||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
|
||||||
CONFIG_GPIOLIB=y
|
|
||||||
CONFIG_GPIO_SYSFS=y
|
|
||||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
|
||||||
CONFIG_HAS_DMA=y
|
|
||||||
CONFIG_HAS_IOMEM=y
|
|
||||||
CONFIG_HAS_IOPORT=y
|
|
||||||
CONFIG_HAVE_ARCH_KGDB=y
|
|
||||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
|
||||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
|
||||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
|
||||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
|
||||||
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
|
||||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
|
||||||
CONFIG_HAVE_IDE=y
|
|
||||||
CONFIG_HAVE_OPROFILE=y
|
|
||||||
CONFIG_HW_HAS_PCI=y
|
|
||||||
CONFIG_HW_RANDOM=m
|
|
||||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
|
||||||
CONFIG_INITRAMFS_SOURCE=""
|
|
||||||
CONFIG_IRQ_CPU=y
|
|
||||||
# CONFIG_LEDS_GPIO is not set
|
|
||||||
CONFIG_LOONGSON_UART_BASE=y
|
|
||||||
# CONFIG_MACH_ALCHEMY is not set
|
|
||||||
# CONFIG_MACH_DECSTATION is not set
|
|
||||||
# CONFIG_MACH_JAZZ is not set
|
|
||||||
# CONFIG_MACH_LOONGSON is not set
|
|
||||||
# CONFIG_MACH_TX39XX is not set
|
|
||||||
# CONFIG_MACH_TX49XX is not set
|
|
||||||
# CONFIG_MACH_VR41XX is not set
|
|
||||||
# CONFIG_MII is not set
|
|
||||||
# CONFIG_MIKROTIK_RB532 is not set
|
|
||||||
CONFIG_MIPS=y
|
|
||||||
# CONFIG_MIPS_COBALT is not set
|
|
||||||
CONFIG_MIPS_L1_CACHE_SHIFT=4
|
|
||||||
CONFIG_MIPS_MACHINE=y
|
|
||||||
# CONFIG_MIPS_MALTA is not set
|
|
||||||
CONFIG_MIPS_MT_DISABLED=y
|
|
||||||
# CONFIG_MIPS_MT_SMP is not set
|
|
||||||
# CONFIG_MIPS_MT_SMTC is not set
|
|
||||||
CONFIG_MIPS_RALINK=y
|
|
||||||
CONFIG_MIPS_RAMIPS_NET=y
|
|
||||||
# CONFIG_MIPS_SIM is not set
|
|
||||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
|
||||||
CONFIG_MTD_CMDLINE_PARTS=y
|
|
||||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
||||||
CONFIG_MTD_PHYSMAP=y
|
|
||||||
CONFIG_NEED_DMA_MAP_STATE=y
|
|
||||||
# CONFIG_NO_IOPORT is not set
|
|
||||||
# CONFIG_NXP_STB220 is not set
|
|
||||||
# CONFIG_NXP_STB225 is not set
|
|
||||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
|
||||||
CONFIG_PCI=y
|
|
||||||
CONFIG_PCI_DOMAINS=y
|
|
||||||
CONFIG_PHYLIB=y
|
|
||||||
# CONFIG_PMC_MSP is not set
|
|
||||||
# CONFIG_PMC_YOSEMITE is not set
|
|
||||||
# CONFIG_PNX8550_JBS is not set
|
|
||||||
# CONFIG_PNX8550_STB810 is not set
|
|
||||||
# CONFIG_POWERTV is not set
|
|
||||||
CONFIG_RALINK_DEV_GPIO_BUTTONS=y
|
|
||||||
CONFIG_RALINK_DEV_GPIO_LEDS=y
|
|
||||||
CONFIG_RALINK_RT288X=y
|
|
||||||
# CONFIG_RALINK_RT305X is not set
|
|
||||||
CONFIG_RT288X_MACH_RT_N15=y
|
|
||||||
CONFIG_RT288X_MACH_WZR_AGL300NH=y
|
|
||||||
CONFIG_RTL8366S_PHY=y
|
|
||||||
CONFIG_RTL8366_SMI=y
|
|
||||||
CONFIG_SCHED_OMIT_FRAME_POINTER=y
|
|
||||||
# CONFIG_SCSI_DMA is not set
|
|
||||||
CONFIG_SCSI_MOD=y
|
|
||||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
|
||||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
|
||||||
CONFIG_SERIAL_8250_RT288X=y
|
|
||||||
# CONFIG_SGI_IP22 is not set
|
|
||||||
# CONFIG_SGI_IP27 is not set
|
|
||||||
# CONFIG_SGI_IP28 is not set
|
|
||||||
# CONFIG_SGI_IP32 is not set
|
|
||||||
# CONFIG_SIBYTE_BIGSUR is not set
|
|
||||||
# CONFIG_SIBYTE_CARMEL is not set
|
|
||||||
# CONFIG_SIBYTE_CRHINE is not set
|
|
||||||
# CONFIG_SIBYTE_CRHONE is not set
|
|
||||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
|
||||||
# CONFIG_SIBYTE_RHONE is not set
|
|
||||||
# CONFIG_SIBYTE_SENTOSA is not set
|
|
||||||
# CONFIG_SIBYTE_SWARM is not set
|
|
||||||
# CONFIG_SLAB is not set
|
|
||||||
CONFIG_SLUB=y
|
|
||||||
CONFIG_SOC_RT288X=y
|
|
||||||
CONFIG_SWCONFIG=y
|
|
||||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
||||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
|
||||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
|
||||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
||||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
||||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
||||||
# CONFIG_TC35815 is not set
|
|
||||||
# CONFIG_TINY_RCU is not set
|
|
||||||
CONFIG_TRAD_SIGNALS=y
|
|
||||||
CONFIG_TREE_RCU=y
|
|
||||||
CONFIG_USB_SUPPORT=y
|
|
||||||
CONFIG_ZONE_DMA_FLAG=0
|
|
|
@ -1,156 +0,0 @@
|
||||||
CONFIG_32BIT=y
|
|
||||||
# CONFIG_64BIT is not set
|
|
||||||
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
|
|
||||||
# CONFIG_AR7 is not set
|
|
||||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
||||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
||||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
|
||||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
||||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
|
||||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
||||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
||||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
||||||
# CONFIG_BCM47XX is not set
|
|
||||||
# CONFIG_BCM63XX is not set
|
|
||||||
CONFIG_BITREVERSE=y
|
|
||||||
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
|
|
||||||
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
|
|
||||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
||||||
CONFIG_CEVT_R4K=y
|
|
||||||
CONFIG_CEVT_R4K_LIB=y
|
|
||||||
CONFIG_CFG80211_DEFAULT_PS_VALUE=0
|
|
||||||
CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
|
|
||||||
# CONFIG_CPU_BIG_ENDIAN is not set
|
|
||||||
# CONFIG_CPU_CAVIUM_OCTEON is not set
|
|
||||||
CONFIG_CPU_HAS_PREFETCH=y
|
|
||||||
CONFIG_CPU_HAS_SYNC=y
|
|
||||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
|
||||||
# CONFIG_CPU_LOONGSON2E is not set
|
|
||||||
CONFIG_CPU_MIPS32=y
|
|
||||||
# CONFIG_CPU_MIPS32_R1 is not set
|
|
||||||
CONFIG_CPU_MIPS32_R2=y
|
|
||||||
# CONFIG_CPU_MIPS64_R1 is not set
|
|
||||||
# CONFIG_CPU_MIPS64_R2 is not set
|
|
||||||
CONFIG_CPU_MIPSR2=y
|
|
||||||
# CONFIG_CPU_NEVADA is not set
|
|
||||||
# CONFIG_CPU_R10000 is not set
|
|
||||||
# CONFIG_CPU_R3000 is not set
|
|
||||||
# CONFIG_CPU_R4300 is not set
|
|
||||||
# CONFIG_CPU_R4X00 is not set
|
|
||||||
# CONFIG_CPU_R5000 is not set
|
|
||||||
# CONFIG_CPU_R5432 is not set
|
|
||||||
# CONFIG_CPU_R5500 is not set
|
|
||||||
# CONFIG_CPU_R6000 is not set
|
|
||||||
# CONFIG_CPU_R8000 is not set
|
|
||||||
# CONFIG_CPU_RM7000 is not set
|
|
||||||
# CONFIG_CPU_RM9000 is not set
|
|
||||||
# CONFIG_CPU_SB1 is not set
|
|
||||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
||||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
||||||
# CONFIG_CPU_TX39XX is not set
|
|
||||||
# CONFIG_CPU_TX49XX is not set
|
|
||||||
# CONFIG_CPU_VR41XX is not set
|
|
||||||
CONFIG_CSRC_R4K=y
|
|
||||||
CONFIG_CSRC_R4K_LIB=y
|
|
||||||
CONFIG_DECOMPRESS_LZMA=y
|
|
||||||
# CONFIG_DM9000 is not set
|
|
||||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
|
||||||
CONFIG_DMA_NONCOHERENT=y
|
|
||||||
CONFIG_EARLY_PRINTK=y
|
|
||||||
# CONFIG_FSNOTIFY is not set
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
||||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
|
||||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
|
||||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
||||||
CONFIG_GENERIC_GPIO=y
|
|
||||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
|
||||||
CONFIG_GPIOLIB=y
|
|
||||||
CONFIG_GPIO_SYSFS=y
|
|
||||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
|
||||||
CONFIG_HAS_DMA=y
|
|
||||||
CONFIG_HAS_IOMEM=y
|
|
||||||
CONFIG_HAS_IOPORT=y
|
|
||||||
CONFIG_HAVE_ARCH_KGDB=y
|
|
||||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
|
||||||
CONFIG_HAVE_IDE=y
|
|
||||||
CONFIG_HAVE_OPROFILE=y
|
|
||||||
CONFIG_HW_RANDOM=m
|
|
||||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
|
||||||
CONFIG_INITRAMFS_SOURCE=""
|
|
||||||
CONFIG_IRQ_CPU=y
|
|
||||||
# CONFIG_LEDS_GPIO is not set
|
|
||||||
# CONFIG_MACH_ALCHEMY is not set
|
|
||||||
# CONFIG_MACH_DECSTATION is not set
|
|
||||||
# CONFIG_MACH_JAZZ is not set
|
|
||||||
# CONFIG_MACH_LOONGSON is not set
|
|
||||||
# CONFIG_MACH_TX39XX is not set
|
|
||||||
# CONFIG_MACH_TX49XX is not set
|
|
||||||
# CONFIG_MACH_VR41XX is not set
|
|
||||||
# CONFIG_MII is not set
|
|
||||||
# CONFIG_MIKROTIK_RB532 is not set
|
|
||||||
CONFIG_MIPS=y
|
|
||||||
# CONFIG_MIPS_COBALT is not set
|
|
||||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
||||||
CONFIG_MIPS_MACHINE=y
|
|
||||||
# CONFIG_MIPS_MALTA is not set
|
|
||||||
CONFIG_MIPS_MT_DISABLED=y
|
|
||||||
# CONFIG_MIPS_MT_SMP is not set
|
|
||||||
# CONFIG_MIPS_MT_SMTC is not set
|
|
||||||
CONFIG_MIPS_RALINK=y
|
|
||||||
CONFIG_MIPS_RAMIPS_NET=y
|
|
||||||
# CONFIG_MIPS_SIM is not set
|
|
||||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
|
||||||
CONFIG_MTD_CMDLINE_PARTS=y
|
|
||||||
CONFIG_MTD_PHYSMAP=y
|
|
||||||
# CONFIG_NO_IOPORT is not set
|
|
||||||
# CONFIG_NXP_STB220 is not set
|
|
||||||
# CONFIG_NXP_STB225 is not set
|
|
||||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
|
||||||
CONFIG_PHYLIB=y
|
|
||||||
# CONFIG_PMC_MSP is not set
|
|
||||||
# CONFIG_PMC_YOSEMITE is not set
|
|
||||||
# CONFIG_PNX8550_JBS is not set
|
|
||||||
# CONFIG_PNX8550_STB810 is not set
|
|
||||||
CONFIG_RALINK_DEV_GPIO_BUTTONS=y
|
|
||||||
CONFIG_RALINK_DEV_GPIO_LEDS=y
|
|
||||||
# CONFIG_RALINK_RT288X is not set
|
|
||||||
CONFIG_RALINK_RT305X=y
|
|
||||||
CONFIG_RT305X_MACH_DIR_300_REVB=y
|
|
||||||
CONFIG_RT305X_MACH_F5D8235_V2=y
|
|
||||||
CONFIG_RT305X_MACH_FONERA20N=y
|
|
||||||
CONFIG_RT305X_MACH_V22RW_2X2=y
|
|
||||||
CONFIG_RT305X_MACH_PWH2004=y
|
|
||||||
CONFIG_RT305X_MACH_WCR150GN=y
|
|
||||||
CONFIG_RT305X_MACH_WHR_G300N=y
|
|
||||||
CONFIG_SCHED_OMIT_FRAME_POINTER=y
|
|
||||||
# CONFIG_SCSI_DMA is not set
|
|
||||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
|
||||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
|
||||||
CONFIG_SERIAL_8250_RT288X=y
|
|
||||||
# CONFIG_SGI_IP22 is not set
|
|
||||||
# CONFIG_SGI_IP27 is not set
|
|
||||||
# CONFIG_SGI_IP28 is not set
|
|
||||||
# CONFIG_SGI_IP32 is not set
|
|
||||||
# CONFIG_SIBYTE_BIGSUR is not set
|
|
||||||
# CONFIG_SIBYTE_CARMEL is not set
|
|
||||||
# CONFIG_SIBYTE_CRHINE is not set
|
|
||||||
# CONFIG_SIBYTE_CRHONE is not set
|
|
||||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
|
||||||
# CONFIG_SIBYTE_RHONE is not set
|
|
||||||
# CONFIG_SIBYTE_SENTOSA is not set
|
|
||||||
# CONFIG_SIBYTE_SWARM is not set
|
|
||||||
# CONFIG_SLAB is not set
|
|
||||||
CONFIG_SLUB=y
|
|
||||||
CONFIG_SOC_RT305X=y
|
|
||||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
||||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
|
||||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
|
||||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
||||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
||||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
||||||
CONFIG_TRAD_SIGNALS=y
|
|
||||||
# CONFIG_TREE_PREEMPT_RCU is not set
|
|
||||||
CONFIG_TREE_RCU=y
|
|
||||||
CONFIG_USB_SUPPORT=y
|
|
||||||
CONFIG_ZONE_DMA_FLAG=0
|
|
|
@ -1,167 +0,0 @@
|
||||||
CONFIG_32BIT=y
|
|
||||||
# CONFIG_64BIT is not set
|
|
||||||
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
|
|
||||||
# CONFIG_AR7 is not set
|
|
||||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
||||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
||||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
|
||||||
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
|
|
||||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
|
||||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
|
||||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
||||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
||||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
|
||||||
# CONFIG_BCM47XX is not set
|
|
||||||
# CONFIG_BCM63XX is not set
|
|
||||||
CONFIG_BITREVERSE=y
|
|
||||||
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
|
|
||||||
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
|
|
||||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
||||||
CONFIG_CEVT_R4K=y
|
|
||||||
CONFIG_CEVT_R4K_LIB=y
|
|
||||||
CONFIG_CMDLINE="console=ttyS1,57600 rootfstype=squashfs,jffs2"
|
|
||||||
CONFIG_CMDLINE_BOOL=y
|
|
||||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
|
||||||
# CONFIG_CPU_BIG_ENDIAN is not set
|
|
||||||
# CONFIG_CPU_CAVIUM_OCTEON is not set
|
|
||||||
CONFIG_CPU_HAS_PREFETCH=y
|
|
||||||
CONFIG_CPU_HAS_SYNC=y
|
|
||||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
|
||||||
# CONFIG_CPU_LOONGSON2E is not set
|
|
||||||
# CONFIG_CPU_LOONGSON2F is not set
|
|
||||||
CONFIG_CPU_MIPS32=y
|
|
||||||
# CONFIG_CPU_MIPS32_R1 is not set
|
|
||||||
CONFIG_CPU_MIPS32_R2=y
|
|
||||||
# CONFIG_CPU_MIPS64_R1 is not set
|
|
||||||
# CONFIG_CPU_MIPS64_R2 is not set
|
|
||||||
CONFIG_CPU_MIPSR2=y
|
|
||||||
# CONFIG_CPU_NEVADA is not set
|
|
||||||
# CONFIG_CPU_R10000 is not set
|
|
||||||
# CONFIG_CPU_R3000 is not set
|
|
||||||
# CONFIG_CPU_R4300 is not set
|
|
||||||
# CONFIG_CPU_R4X00 is not set
|
|
||||||
# CONFIG_CPU_R5000 is not set
|
|
||||||
# CONFIG_CPU_R5432 is not set
|
|
||||||
# CONFIG_CPU_R5500 is not set
|
|
||||||
# CONFIG_CPU_R6000 is not set
|
|
||||||
# CONFIG_CPU_R8000 is not set
|
|
||||||
# CONFIG_CPU_RM7000 is not set
|
|
||||||
# CONFIG_CPU_RM9000 is not set
|
|
||||||
# CONFIG_CPU_SB1 is not set
|
|
||||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
|
||||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
|
||||||
# CONFIG_CPU_TX39XX is not set
|
|
||||||
# CONFIG_CPU_TX49XX is not set
|
|
||||||
# CONFIG_CPU_VR41XX is not set
|
|
||||||
CONFIG_CSRC_R4K=y
|
|
||||||
CONFIG_CSRC_R4K_LIB=y
|
|
||||||
CONFIG_DECOMPRESS_LZMA=y
|
|
||||||
# CONFIG_DM9000 is not set
|
|
||||||
CONFIG_DMA_NONCOHERENT=y
|
|
||||||
CONFIG_EARLY_PRINTK=y
|
|
||||||
# CONFIG_FSNOTIFY is not set
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
|
||||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
||||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
|
||||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
|
||||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|
||||||
CONFIG_GENERIC_GPIO=y
|
|
||||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
|
||||||
CONFIG_GPIOLIB=y
|
|
||||||
CONFIG_GPIO_SYSFS=y
|
|
||||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
|
||||||
CONFIG_HAS_DMA=y
|
|
||||||
CONFIG_HAS_IOMEM=y
|
|
||||||
CONFIG_HAS_IOPORT=y
|
|
||||||
CONFIG_HAVE_ARCH_KGDB=y
|
|
||||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
|
||||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
|
||||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
|
||||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
|
||||||
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
|
||||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
|
||||||
CONFIG_HAVE_IDE=y
|
|
||||||
CONFIG_HAVE_OPROFILE=y
|
|
||||||
CONFIG_HW_RANDOM=m
|
|
||||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
|
||||||
CONFIG_INITRAMFS_SOURCE=""
|
|
||||||
CONFIG_IRQ_CPU=y
|
|
||||||
# CONFIG_LEDS_GPIO is not set
|
|
||||||
CONFIG_LOONGSON_UART_BASE=y
|
|
||||||
# CONFIG_MACH_ALCHEMY is not set
|
|
||||||
# CONFIG_MACH_DECSTATION is not set
|
|
||||||
# CONFIG_MACH_JAZZ is not set
|
|
||||||
# CONFIG_MACH_LOONGSON is not set
|
|
||||||
# CONFIG_MACH_TX39XX is not set
|
|
||||||
# CONFIG_MACH_TX49XX is not set
|
|
||||||
# CONFIG_MACH_VR41XX is not set
|
|
||||||
# CONFIG_MII is not set
|
|
||||||
# CONFIG_MIKROTIK_RB532 is not set
|
|
||||||
CONFIG_MIPS=y
|
|
||||||
# CONFIG_MIPS_COBALT is not set
|
|
||||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
|
||||||
CONFIG_MIPS_MACHINE=y
|
|
||||||
# CONFIG_MIPS_MALTA is not set
|
|
||||||
CONFIG_MIPS_MT_DISABLED=y
|
|
||||||
# CONFIG_MIPS_MT_SMP is not set
|
|
||||||
# CONFIG_MIPS_MT_SMTC is not set
|
|
||||||
CONFIG_MIPS_RALINK=y
|
|
||||||
CONFIG_MIPS_RAMIPS_NET=y
|
|
||||||
# CONFIG_MIPS_SIM is not set
|
|
||||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
|
||||||
CONFIG_MTD_CMDLINE_PARTS=y
|
|
||||||
CONFIG_MTD_PHYSMAP=y
|
|
||||||
CONFIG_NEED_DMA_MAP_STATE=y
|
|
||||||
# CONFIG_NO_IOPORT is not set
|
|
||||||
# CONFIG_NXP_STB220 is not set
|
|
||||||
# CONFIG_NXP_STB225 is not set
|
|
||||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
|
||||||
CONFIG_PHYLIB=y
|
|
||||||
# CONFIG_PMC_MSP is not set
|
|
||||||
# CONFIG_PMC_YOSEMITE is not set
|
|
||||||
# CONFIG_PNX8550_JBS is not set
|
|
||||||
# CONFIG_PNX8550_STB810 is not set
|
|
||||||
# CONFIG_POWERTV is not set
|
|
||||||
CONFIG_RALINK_DEV_GPIO_BUTTONS=y
|
|
||||||
CONFIG_RALINK_DEV_GPIO_LEDS=y
|
|
||||||
# CONFIG_RALINK_RT288X is not set
|
|
||||||
CONFIG_RALINK_RT305X=y
|
|
||||||
CONFIG_RT305X_MACH_DIR_300_REVB=y
|
|
||||||
CONFIG_RT305X_MACH_F5D8235_V2=y
|
|
||||||
CONFIG_RT305X_MACH_FONERA20N=y
|
|
||||||
CONFIG_RT305X_MACH_V22RW_2X2=y
|
|
||||||
CONFIG_RT305X_MACH_PWH2004=y
|
|
||||||
CONFIG_RT305X_MACH_WCR150GN=y
|
|
||||||
CONFIG_RT305X_MACH_WHR_G300N=y
|
|
||||||
CONFIG_SCHED_OMIT_FRAME_POINTER=y
|
|
||||||
# CONFIG_SCSI_DMA is not set
|
|
||||||
CONFIG_SCSI_MOD=y
|
|
||||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
|
||||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
|
||||||
CONFIG_SERIAL_8250_RT288X=y
|
|
||||||
# CONFIG_SGI_IP22 is not set
|
|
||||||
# CONFIG_SGI_IP27 is not set
|
|
||||||
# CONFIG_SGI_IP28 is not set
|
|
||||||
# CONFIG_SGI_IP32 is not set
|
|
||||||
# CONFIG_SIBYTE_BIGSUR is not set
|
|
||||||
# CONFIG_SIBYTE_CARMEL is not set
|
|
||||||
# CONFIG_SIBYTE_CRHINE is not set
|
|
||||||
# CONFIG_SIBYTE_CRHONE is not set
|
|
||||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
|
||||||
# CONFIG_SIBYTE_RHONE is not set
|
|
||||||
# CONFIG_SIBYTE_SENTOSA is not set
|
|
||||||
# CONFIG_SIBYTE_SWARM is not set
|
|
||||||
# CONFIG_SLAB is not set
|
|
||||||
CONFIG_SLUB=y
|
|
||||||
CONFIG_SOC_RT305X=y
|
|
||||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
|
||||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
|
||||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
|
||||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
|
||||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
|
||||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
|
||||||
# CONFIG_TINY_RCU is not set
|
|
||||||
CONFIG_TRAD_SIGNALS=y
|
|
||||||
CONFIG_TREE_RCU=y
|
|
||||||
CONFIG_USB_SUPPORT=y
|
|
||||||
CONFIG_ZONE_DMA_FLAG=0
|
|
Loading…
Reference in a new issue