kernel: update kernel 4.9 to 4.9.37

- Refreshed all patches
- Removed upstreamed
- Adapted 4 patches:

473-fix-marvell-phy-initialization-issues.patch
-----------------------------------------------
Removed hunk 5 which got upstreamed

403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch
404-net-phy-restart-phy-autonegotiation-after-EEE-advert.patch
--------------------------------------------------------------
Adapted these 2 RFC patches, merging the delta's from an upstream commit
(see below) which made it before these 2.

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-
stable.git/commit/?h=v4.9.36&id=97ace183074d306942b903a148aebd5d061758f0

180-usb-xhci-add-support-for-performing-fake-doorbell.patch
-----------------------------------------------------------
- Moved fake_doorbell bitmask due to new item

Compile tested on: cns3xxx, imx6
Run tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

include/kernel-version.mk

@@ -4,11 +4,11 @@ LINUX_RELEASE?=1
 
 LINUX_VERSION-3.18 = .43
 LINUX_VERSION-4.4 = .74
-LINUX_VERSION-4.9 = .34
+LINUX_VERSION-4.9 = .37
 
 LINUX_KERNEL_HASH-3.18.43 = 1236e8123a6ce537d5029232560966feed054ae31776fe8481dd7d18cdd5492c
 LINUX_KERNEL_HASH-4.4.74 = c319ad6150d112bd4f8c9d1427868eeafd3ab461becf9457f814e4ba7c57808e
-LINUX_KERNEL_HASH-4.9.34 = 13d159d1b1fa41ea19fcc2defe09d7532f312ee0b8279b8e12c961d8b02a4546
+LINUX_KERNEL_HASH-4.9.37 = f61ecf083b690d97cfdeec2b4457992e98882250c4f41ade36fd7cdfda066090
 
 ifdef KERNEL_PATCHVER
   LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER)))

target/linux/apm821xx/patches-4.9/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch

@@ -44,7 +44,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
  
  #include "xhci.h"
  #include "xhci-trace.h"
-@@ -230,6 +232,458 @@ static void xhci_pme_acpi_rtd3_enable(st
+@@ -242,6 +244,458 @@ static void xhci_pme_acpi_rtd3_enable(st
  static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
  #endif /* CONFIG_ACPI */
  
@@ -503,7 +503,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
  /* called during probe() after chip reset completes */
  static int xhci_pci_setup(struct usb_hcd *hcd)
  {
-@@ -269,6 +723,22 @@ static int xhci_pci_probe(struct pci_dev
+@@ -281,6 +735,22 @@ static int xhci_pci_probe(struct pci_dev
  	struct hc_driver *driver;
  	struct usb_hcd *hcd;
  
@@ -526,7 +526,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
  	driver = (struct hc_driver *)id->driver_data;
  
  	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
-@@ -326,6 +796,16 @@ static void xhci_pci_remove(struct pci_d
+@@ -338,6 +808,16 @@ static void xhci_pci_remove(struct pci_d
  {
  	struct xhci_hcd *xhci;
  

target/linux/apm821xx/patches-4.9/802-usb-xhci-force-msi-renesas-xhci.patch

@@ -13,7 +13,7 @@ produce a noisy warning.
 
 --- a/drivers/usb/host/xhci-pci.c
 +++ b/drivers/usb/host/xhci-pci.c
-@@ -191,7 +191,7 @@ static void xhci_pci_quirks(struct devic
+@@ -203,7 +203,7 @@ static void xhci_pci_quirks(struct devic
  	}
  	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
  			pdev->device == 0x0015)
@@ -44,7 +44,7 @@ produce a noisy warning.
  		/* hcd->irq is 0, we have MSI */
 --- a/drivers/usb/host/xhci.h
 +++ b/drivers/usb/host/xhci.h
-@@ -1678,6 +1678,7 @@ struct xhci_hcd {
+@@ -1679,6 +1679,7 @@ struct xhci_hcd {
  	/* support xHCI 0.96 spec USB2 software LPM */
  	unsigned		sw_lpm_support:1;
  	/* support xHCI 1.0 spec USB2 hardware LPM */

target/linux/bcm53xx/patches-4.9/060-0001-net-phy-Initialize-mdio-clock-at-probe-function.patch

@@ -1,48 +0,0 @@
-From bb1a619735b4660f21bce3e728b937640024b4ad Mon Sep 17 00:00:00 2001
-From: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
-Date: Wed, 8 Feb 2017 17:14:26 -0500
-Subject: [PATCH] net: phy: Initialize mdio clock at probe function
-
-USB PHYs need the MDIO clock divisor enabled earlier to work.
-Initialize mdio clock divisor in probe function. The ext bus
-bit available in the same register will be used by mdio mux
-to enable external mdio.
-
-Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
-Fixes: ddc24ae1 ("net: phy: Broadcom iProc MDIO bus driver")
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/mdio-bcm-iproc.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/mdio-bcm-iproc.c
-+++ b/drivers/net/phy/mdio-bcm-iproc.c
-@@ -81,8 +81,6 @@ static int iproc_mdio_read(struct mii_bu
- 	if (rc)
- 		return rc;
- 
--	iproc_mdio_config_clk(priv->base);
--
- 	/* Prepare the read operation */
- 	cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
- 		(reg << MII_DATA_RA_SHIFT) |
-@@ -112,8 +110,6 @@ static int iproc_mdio_write(struct mii_b
- 	if (rc)
- 		return rc;
- 
--	iproc_mdio_config_clk(priv->base);
--
- 	/* Prepare the write operation */
- 	cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
- 		(reg << MII_DATA_RA_SHIFT) |
-@@ -163,6 +159,8 @@ static int iproc_mdio_probe(struct platf
- 	bus->read = iproc_mdio_read;
- 	bus->write = iproc_mdio_write;
- 
-+	iproc_mdio_config_clk(priv->base);
-+
- 	rc = of_mdiobus_register(bus, pdev->dev.of_node);
- 	if (rc) {
- 		dev_err(&pdev->dev, "MDIO bus registration failed\n");

target/linux/bcm53xx/patches-4.9/180-usb-xhci-add-support-for-performing-fake-doorbell.patch

@@ -127,11 +127,11 @@ it on BCM4708 family.
  /*
 --- a/drivers/usb/host/xhci.h
 +++ b/drivers/usb/host/xhci.h
-@@ -1660,6 +1660,7 @@ struct xhci_hcd {
+@@ -1661,6 +1661,7 @@ struct xhci_hcd {
- /* For controller with a broken Port Disable implementation */
  #define XHCI_BROKEN_PORT_PED	(1 << 25)
  #define XHCI_LIMIT_ENDPOINT_INTERVAL_7	(1 << 26)
-+#define XHCI_FAKE_DOORBELL	(1 << 27)
+ #define XHCI_U2_DISABLE_WAKE	(1 << 27)
++#define XHCI_FAKE_DOORBELL	(1 << 28)
  
  	unsigned int		num_active_eps;
  	unsigned int		limit_active_eps;

target/linux/brcm2708/patches-4.9/950-0019-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch

@@ -46,7 +46,7 @@ Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
  
  struct bcm2835_dmadev {
  	struct dma_device ddev;
-@@ -922,6 +924,9 @@ static int bcm2835_dma_probe(struct plat
+@@ -925,6 +927,9 @@ static int bcm2835_dma_probe(struct plat
  	base = devm_ioremap_resource(&pdev->dev, res);
  	if (IS_ERR(base))
  		return PTR_ERR(base);
@@ -56,7 +56,7 @@ Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
  
  	od->base = base;
  
-@@ -959,6 +964,9 @@ static int bcm2835_dma_probe(struct plat
+@@ -962,6 +967,9 @@ static int bcm2835_dma_probe(struct plat
  		goto err_no_dma;
  	}
  
@@ -66,7 +66,7 @@ Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
  	/* get irqs for each channel that we support */
  	for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
  		/* skip masked out channels */
-@@ -1033,6 +1041,7 @@ static int bcm2835_dma_remove(struct pla
+@@ -1036,6 +1044,7 @@ static int bcm2835_dma_remove(struct pla
  {
  	struct bcm2835_dmadev *od = platform_get_drvdata(pdev);
  
@@ -74,7 +74,7 @@ Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
  	dma_async_device_unregister(&od->ddev);
  	bcm2835_dma_free(od);
  
-@@ -1048,7 +1057,22 @@ static struct platform_driver bcm2835_dm
+@@ -1051,7 +1060,22 @@ static struct platform_driver bcm2835_dm
  	},
  };
  

target/linux/brcm2708/patches-4.9/950-0187-dmaengine-bcm2835-Fix-cyclic-DMA-period-splitting.patch

@@ -1,39 +0,0 @@
-From 9fd7a158ec098ab05b8d3ec2c2973b3dc7e498f3 Mon Sep 17 00:00:00 2001
-From: Matthias Reichl <hias@horus.com>
-Date: Mon, 20 Feb 2017 20:01:16 +0100
-Subject: [PATCH] dmaengine: bcm2835: Fix cyclic DMA period splitting
-
-The code responsible for splitting periods into chunks that
-can be handled by the DMA controller missed to update total_len,
-the number of bytes processed in the current period, when there
-are more chunks to follow.
-
-Therefore total_len was stuck at 0 and the code didn't work at all.
-This resulted in a wrong control block layout and audio issues because
-the cyclic DMA callback wasn't executing on period boundaries.
-
-Fix this by adding the missing total_len update.
-
-Signed-off-by: Matthias Reichl <hias@horus.com>
-Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
-Tested-by: Clive Messer <clive.messer@digitaldreamtime.co.uk>
-Reviewed-by: Eric Anholt <eric@anholt.net>
----
- drivers/dma/bcm2835-dma.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/dma/bcm2835-dma.c
-+++ b/drivers/dma/bcm2835-dma.c
-@@ -253,8 +253,11 @@ static void bcm2835_dma_create_cb_set_le
- 	 */
- 
- 	/* have we filled in period_length yet? */
--	if (*total_len + control_block->length < period_len)
-+	if (*total_len + control_block->length < period_len) {
-+		/* update number of bytes in this period so far */
-+		*total_len += control_block->length;
- 		return;
-+	}
- 
- 	/* calculate the length that remains to reach period_length */
- 	control_block->length = period_len - *total_len;

target/linux/cns3xxx/patches-4.9/075-spi_support.patch

@@ -39,7 +39,7 @@
  /**
 --- a/drivers/spi/spi.c
 +++ b/drivers/spi/spi.c
-@@ -983,6 +983,9 @@ static int spi_transfer_one_message(stru
+@@ -985,6 +985,9 @@ static int spi_transfer_one_message(stru
  	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
  		trace_spi_transfer_start(msg, xfer);
  

target/linux/generic/patches-4.9/061-v4.10-0002-mtd-spi-nor-fix-spansion-quad-enable.patch

@@ -26,8 +26,8 @@ Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
 
 --- a/drivers/mtd/spi-nor/spi-nor.c
 +++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1256,6 +1256,13 @@ static int spansion_quad_enable(struct s
+@@ -1263,6 +1263,13 @@ static int spansion_quad_enable(struct s
- 		return -EINVAL;
+ 		return ret;
  	}
  
 +	ret = spi_nor_wait_till_ready(nor);

target/linux/generic/patches-4.9/062-v4.11-0001-mtd-spi-nor-Add-support-for-S3AN-spi-nor-devices.patch

@@ -206,7 +206,7 @@ Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
  		if (ret < 0)
  			goto write_err;
  		written = ret;
-@@ -1312,6 +1401,47 @@ static int spi_nor_check(struct spi_nor
+@@ -1319,6 +1408,47 @@ static int spi_nor_check(struct spi_nor
  	return 0;
  }
  
@@ -254,7 +254,7 @@ Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
  int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
  {
  	const struct flash_info *info = NULL;
-@@ -1360,6 +1490,14 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1367,6 +1497,14 @@ int spi_nor_scan(struct spi_nor *nor, co
  	mutex_init(&nor->lock);
  
  	/*
@@ -269,7 +269,7 @@ Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
  	 * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
  	 * with the software protection bits set
  	 */
-@@ -1517,6 +1655,12 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1524,6 +1662,12 @@ int spi_nor_scan(struct spi_nor *nor, co
  
  	nor->read_dummy = spi_nor_read_dummy_cycles(nor);
  

target/linux/generic/patches-4.9/062-v4.11-0004-mtd-spi-nor-rename-SPINOR_OP_-macros-of-the-4-byte-a.patch

@@ -95,7 +95,7 @@ Acked-by: Marek Vasut <marek.vasut@gmail.com>
  static struct seq_rw_config stfsm_s25fl_write4_configs[] = {
 --- a/drivers/mtd/spi-nor/spi-nor.c
 +++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1625,16 +1625,16 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1632,16 +1632,16 @@ int spi_nor_scan(struct spi_nor *nor, co
  			/* Dedicated 4-byte command set */
  			switch (nor->flash_read) {
  			case SPI_NOR_QUAD:

target/linux/generic/patches-4.9/062-v4.11-0005-mtd-spi-nor-add-a-stateless-method-to-support-memory.patch

@@ -116,7 +116,7 @@ Acked-by: Marek Vasut <marek.vasut@gmail.com>
  /* Enable/disable 4-byte addressing mode. */
  static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info,
  			    int enable)
-@@ -1621,27 +1697,10 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1628,27 +1704,10 @@ int spi_nor_scan(struct spi_nor *nor, co
  	else if (mtd->size > 0x1000000) {
  		/* enable 4-byte addressing if the device exceeds 16MiB */
  		nor->addr_width = 4;

target/linux/generic/patches-4.9/121-of-Add-check-to-of_scan_flat_dt-before-accessing-ini.patch

@@ -1,30 +0,0 @@
-From: Tobias Wolf <dev-NTEO@vplace.de>
-Date: Wed, 23 Nov 2016 10:40:07 +0100
-Subject: [PATCH] of: Add check to of_scan_flat_dt() before accessing
- initial_boot_params
-
-An empty __dtb_start to __dtb_end section might result in initial_boot_params
-being null for arch/mips/ralink. This showed that the boot process hangs
-indefinitely in of_scan_flat_dt().
-
-Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
----
-
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -741,9 +741,12 @@ int __init of_scan_flat_dt(int (*it)(uns
- 	const char *pathp;
- 	int offset, rc = 0, depth = -1;
- 
--        for (offset = fdt_next_node(blob, -1, &depth);
--             offset >= 0 && depth >= 0 && !rc;
--             offset = fdt_next_node(blob, offset, &depth)) {
-+	if (!blob)
-+		return 0;
-+
-+	for (offset = fdt_next_node(blob, -1, &depth);
-+	     offset >= 0 && depth >= 0 && !rc;
-+	     offset = fdt_next_node(blob, offset, &depth)) {
- 
- 		pathp = fdt_get_name(blob, offset, NULL);
- 		if (*pathp == '/')

target/linux/generic/patches-4.9/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch

@@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/drivers/spi/spi.c
 +++ b/drivers/spi/spi.c
-@@ -698,7 +698,7 @@ static void spi_set_cs(struct spi_device
+@@ -700,7 +700,7 @@ static void spi_set_cs(struct spi_device
  		enable = !enable;
  
  	if (gpio_is_valid(spi->cs_gpio))

target/linux/generic/patches-4.9/465-m25p80-mx-disable-software-protection.patch

@@ -4,7 +4,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/drivers/mtd/spi-nor/spi-nor.c
 +++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1588,6 +1588,7 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1595,6 +1595,7 @@ int spi_nor_scan(struct spi_nor *nor, co
  
  	if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
  	    JEDEC_MFR(info) == SNOR_MFR_INTEL ||

target/linux/generic/patches-4.9/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch

@@ -302,7 +302,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  /**
   * ip6_tnl_addr_conflict - compare packet addresses to tunnel's own
   *   @t: the outgoing tunnel device
-@@ -1283,6 +1423,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+@@ -1285,6 +1425,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
  {
  	struct ip6_tnl *t = netdev_priv(dev);
  	struct ipv6hdr *ipv6h = ipv6_hdr(skb);
@@ -310,7 +310,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  	int encap_limit = -1;
  	__u16 offset;
  	struct flowi6 fl6;
-@@ -1338,6 +1479,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+@@ -1343,6 +1484,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
  			fl6.flowi6_mark = skb->mark;
  	}
  
@@ -329,7 +329,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  	if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
  		return -1;
  
-@@ -1463,6 +1616,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
+@@ -1470,6 +1623,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
  	t->parms.flowinfo = p->flowinfo;
  	t->parms.link = p->link;
  	t->parms.proto = p->proto;
@@ -344,7 +344,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  	dst_cache_reset(&t->dst_cache);
  	ip6_tnl_link_config(t);
  	return 0;
-@@ -1501,6 +1662,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
+@@ -1508,6 +1669,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
  	p->flowinfo = u->flowinfo;
  	p->link = u->link;
  	p->proto = u->proto;
@@ -352,7 +352,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  	memcpy(p->name, u->name, sizeof(u->name));
  }
  
-@@ -1878,6 +2040,15 @@ static int ip6_tnl_validate(struct nlatt
+@@ -1885,6 +2047,15 @@ static int ip6_tnl_validate(struct nlatt
  	return 0;
  }
  
@@ -368,7 +368,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  static void ip6_tnl_netlink_parms(struct nlattr *data[],
  				  struct __ip6_tnl_parm *parms)
  {
-@@ -1912,6 +2083,46 @@ static void ip6_tnl_netlink_parms(struct
+@@ -1919,6 +2090,46 @@ static void ip6_tnl_netlink_parms(struct
  
  	if (data[IFLA_IPTUN_COLLECT_METADATA])
  		parms->collect_md = true;
@@ -415,7 +415,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  }
  
  static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
-@@ -2021,6 +2232,12 @@ static void ip6_tnl_dellink(struct net_d
+@@ -2028,6 +2239,12 @@ static void ip6_tnl_dellink(struct net_d
  
  static size_t ip6_tnl_get_size(const struct net_device *dev)
  {
@@ -428,7 +428,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  	return
  		/* IFLA_IPTUN_LINK */
  		nla_total_size(4) +
-@@ -2048,6 +2265,24 @@ static size_t ip6_tnl_get_size(const str
+@@ -2055,6 +2272,24 @@ static size_t ip6_tnl_get_size(const str
  		nla_total_size(2) +
  		/* IFLA_IPTUN_COLLECT_METADATA */
  		nla_total_size(0) +
@@ -453,7 +453,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  		0;
  }
  
-@@ -2055,6 +2290,9 @@ static int ip6_tnl_fill_info(struct sk_b
+@@ -2062,6 +2297,9 @@ static int ip6_tnl_fill_info(struct sk_b
  {
  	struct ip6_tnl *tunnel = netdev_priv(dev);
  	struct __ip6_tnl_parm *parm = &tunnel->parms;
@@ -463,7 +463,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  
  	if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
  	    nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
-@@ -2063,9 +2301,27 @@ static int ip6_tnl_fill_info(struct sk_b
+@@ -2070,9 +2308,27 @@ static int ip6_tnl_fill_info(struct sk_b
  	    nla_put_u8(skb, IFLA_IPTUN_ENCAP_LIMIT, parm->encap_limit) ||
  	    nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
  	    nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
@@ -492,7 +492,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
  	if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
  	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
  	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
-@@ -2103,6 +2359,7 @@ static const struct nla_policy ip6_tnl_p
+@@ -2110,6 +2366,7 @@ static const struct nla_policy ip6_tnl_p
  	[IFLA_IPTUN_ENCAP_SPORT]	= { .type = NLA_U16 },
  	[IFLA_IPTUN_ENCAP_DPORT]	= { .type = NLA_U16 },
  	[IFLA_IPTUN_COLLECT_METADATA]	= { .type = NLA_FLAG },

target/linux/generic/patches-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch

@@ -88,7 +88,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  	default:
 --- a/net/ipv6/fib6_rules.c
 +++ b/net/ipv6/fib6_rules.c
-@@ -88,6 +88,10 @@ static int fib6_rule_action(struct fib_r
+@@ -77,6 +77,10 @@ static int fib6_rule_action(struct fib_r
  		err = -EACCES;
  		rt = net->ipv6.ip6_prohibit_entry;
  		goto discard_pkt;

target/linux/generic/patches-4.9/680-NET-skip-GRO-for-foreign-MAC-addresses.patch

@@ -17,7 +17,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/net/core/dev.c
 +++ b/net/core/dev.c
-@@ -4512,6 +4512,9 @@ static enum gro_result dev_gro_receive(s
+@@ -4513,6 +4513,9 @@ static enum gro_result dev_gro_receive(s
  	enum gro_result ret;
  	int grow;
  
@@ -27,7 +27,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	if (!(skb->dev->features & NETIF_F_GRO))
  		goto normal;
  
-@@ -5789,6 +5792,48 @@ static void __netdev_adjacent_dev_unlink
+@@ -5790,6 +5793,48 @@ static void __netdev_adjacent_dev_unlink
  					   &upper_dev->adj_list.lower);
  }
  
@@ -76,7 +76,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  static int __netdev_upper_dev_link(struct net_device *dev,
  				   struct net_device *upper_dev, bool master,
  				   void *upper_priv, void *upper_info)
-@@ -5987,6 +6032,8 @@ void netdev_upper_dev_unlink(struct net_
+@@ -5988,6 +6033,8 @@ void netdev_upper_dev_unlink(struct net_
  	list_for_each_entry(i, &upper_dev->all_adj_list.upper, list)
  		__netdev_adjacent_dev_unlink(dev, i->dev, i->ref_nr);
  
@@ -85,7 +85,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	call_netdevice_notifiers_info(NETDEV_CHANGEUPPER, dev,
  				      &changeupper_info.info);
  }
-@@ -6587,6 +6634,7 @@ int dev_set_mac_address(struct net_devic
+@@ -6588,6 +6635,7 @@ int dev_set_mac_address(struct net_devic
  	if (err)
  		return err;
  	dev->addr_assign_type = NET_ADDR_SET;

target/linux/generic/patches-4.9/701-phy_extension.patch

@@ -53,7 +53,7 @@
   * @phydev: the phy_device struct
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -813,6 +813,7 @@ int phy_ethtool_ksettings_get(struct phy
+@@ -816,6 +816,7 @@ int phy_ethtool_ksettings_get(struct phy
  			      struct ethtool_link_ksettings *cmd);
  int phy_ethtool_ksettings_set(struct phy_device *phydev,
  			      const struct ethtool_link_ksettings *cmd);

target/linux/generic/patches-4.9/702-phy_add_aneg_done_function.patch

@@ -1,6 +1,6 @@
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -496,6 +496,12 @@ struct phy_driver {
+@@ -499,6 +499,12 @@ struct phy_driver {
  	/* Determines the negotiated speed and duplex */
  	int (*read_status)(struct phy_device *phydev);
  
@@ -15,7 +15,7 @@
  
 --- a/drivers/net/phy/phy_device.c
 +++ b/drivers/net/phy/phy_device.c
-@@ -1267,6 +1267,9 @@ int genphy_update_link(struct phy_device
+@@ -1309,6 +1309,9 @@ int genphy_update_link(struct phy_device
  {
  	int status;
  

target/linux/generic/patches-4.9/703-phy-add-detach-callback-to-struct-phy_driver.patch

@@ -12,7 +12,7 @@
  	phy_suspend(phydev);
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -514,6 +514,12 @@ struct phy_driver {
+@@ -517,6 +517,12 @@ struct phy_driver {
  	 */
  	int (*did_interrupt)(struct phy_device *phydev);
  

target/linux/generic/patches-4.9/704-phy-no-genphy-soft-reset.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/phy_device.c
 +++ b/drivers/net/phy/phy_device.c
-@@ -1485,7 +1485,7 @@ int genphy_config_init(struct phy_device
+@@ -1527,7 +1527,7 @@ int genphy_config_init(struct phy_device
  	return 0;
  }
  
@@ -9,7 +9,7 @@
  {
  	/* Do nothing for now */
  	return 0;
-@@ -1724,7 +1724,7 @@ static struct phy_driver genphy_driver[]
+@@ -1798,7 +1798,7 @@ static struct phy_driver genphy_driver[]
  	.phy_id		= 0xffffffff,
  	.phy_id_mask	= 0xffffffff,
  	.name		= "Generic PHY",
@@ -18,7 +18,7 @@
  	.config_init	= genphy_config_init,
  	.features	= PHY_GBIT_FEATURES | SUPPORTED_MII |
  			  SUPPORTED_AUI | SUPPORTED_FIBRE |
-@@ -1738,7 +1738,7 @@ static struct phy_driver genphy_driver[]
+@@ -1812,7 +1812,7 @@ static struct phy_driver genphy_driver[]
  	.phy_id         = 0xffffffff,
  	.phy_id_mask    = 0xffffffff,
  	.name           = "Generic 10G PHY",

target/linux/generic/patches-4.9/710-phy-add-mdio_register_board_info.patch

@@ -50,7 +50,7 @@
  		phy_device_free(phydev);
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -856,6 +856,23 @@ void mdio_bus_exit(void);
+@@ -859,6 +859,23 @@ void mdio_bus_exit(void);
  
  extern struct bus_type mdio_bus_type;
  

target/linux/generic/patches-4.9/721-phy_packets.patch

@@ -86,7 +86,7 @@
  	help
 --- a/net/core/dev.c
 +++ b/net/core/dev.c
-@@ -2931,10 +2931,20 @@ static int xmit_one(struct sk_buff *skb,
+@@ -2932,10 +2932,20 @@ static int xmit_one(struct sk_buff *skb,
  	if (!list_empty(&ptype_all) || !list_empty(&dev->ptype_all))
  		dev_queue_xmit_nit(skb, dev);
  

target/linux/generic/patches-4.9/902-debloat_proc.patch

@@ -122,7 +122,7 @@
  		return -ENOMEM;
 --- a/mm/vmalloc.c
 +++ b/mm/vmalloc.c
-@@ -2703,6 +2703,8 @@ static const struct file_operations proc
+@@ -2713,6 +2713,8 @@ static const struct file_operations proc
  
  static int __init proc_vmalloc_init(void)
  {

target/linux/ipq806x/patches-4.9/130-pinctrl-ipq4019-add-pinctrl.patch

@@ -1,51 +0,0 @@
-From e7748d641ae37081e2034869491f1629461ae13c Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Thu, 16 Mar 2017 21:00:18 +0100
-Subject: [PATCH] pinctrl: ipq4019: Add missing pingroups
-
-This patch adds the missing PINGROUP for GPIO70-99.
-This fixes a crash that happens in pinctrl-msm, if any
-of the GPIO70-99 are accessed.
-
-Fixes: 5303f7827fcd41d ("pinctrl: qcom: ipq4019: set ngpios to correct value")
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
---- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-+++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-@@ -405,6 +405,36 @@ static const struct msm_pingroup ipq4019
- 	PINGROUP(67, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- 	PINGROUP(68, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- 	PINGROUP(69, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(70, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(71, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(72, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(73, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(74, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(75, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(76, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(77, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(78, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(79, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(80, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(81, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(82, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(83, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(84, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(85, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(86, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(87, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(88, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(89, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(90, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(91, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(92, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(93, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(94, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(95, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(96, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(97, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(98, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+	PINGROUP(99, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- };
- 
- static const struct msm_pinctrl_soc_data ipq4019_pinctrl = {

target/linux/lantiq/patches-4.9/0093-spi-double-time-out-tolerance.patch

@@ -1,37 +0,0 @@
-From 833bfade96561216aa2129516a5926a0326860a2 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 17 Apr 2017 01:38:05 +0200
-Subject: spi: double time out tolerance
-
-The generic SPI code calculates how long the issued transfer would take
-and adds 100ms in addition to the timeout as tolerance. On my 500 MHz
-Lantiq Mips SoC I am getting timeouts from the SPI like this when the
-system boots up:
-
-m25p80 spi32766.4: SPI transfer timed out
-blk_update_request: I/O error, dev mtdblock3, sector 2
-SQUASHFS error: squashfs_read_data failed to read block 0x6e
-
-After increasing the tolerance for the timeout to 200ms I haven't seen
-these SPI transfer time outs any more.
-The Lantiq SPI driver in use here has an extra work queue in between,
-which gets triggered when the controller send the last word and the
-hardware FIFOs used for reading and writing are only 8 words long.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -1004,7 +1004,7 @@ static int spi_transfer_one_message(stru
- 				ret = 0;
- 				ms = 8LL * 1000LL * xfer->len;
- 				do_div(ms, xfer->speed_hz);
--				ms += ms + 100; /* some tolerance */
-+				ms += ms + 200; /* some tolerance */
- 
- 				if (ms > UINT_MAX)
- 					ms = UINT_MAX;

target/linux/mediatek/patches-4.9/0096-dsa-multi-cpu.patch

@@ -229,7 +229,7 @@
  	struct netpoll *netpoll;
  	int err = 0;
  
-@@ -1235,11 +1235,16 @@ int dsa_slave_create(struct dsa_switch *
+@@ -1233,11 +1233,16 @@ int dsa_slave_create(struct dsa_switch *
  	struct net_device *master;
  	struct net_device *slave_dev;
  	struct dsa_slave_priv *p;
@@ -248,7 +248,7 @@
  
  	slave_dev = alloc_netdev(sizeof(struct dsa_slave_priv), name,
  				 NET_NAME_UNKNOWN, ether_setup);
-@@ -1265,6 +1270,7 @@ int dsa_slave_create(struct dsa_switch *
+@@ -1263,6 +1268,7 @@ int dsa_slave_create(struct dsa_switch *
  	p->parent = ds;
  	p->port = port;
  	p->xmit = dst->tag_ops->xmit;

target/linux/mvebu/patches-4.9/400-phy-provide-a-hook-for-link-up-link-down-events.patch

@@ -167,7 +167,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -426,6 +426,7 @@ struct phy_device {
+@@ -429,6 +429,7 @@ struct phy_device {
  
  	u8 mdix;
  

target/linux/mvebu/patches-4.9/401-net-phy-move-phy-MMD-accessors-to-phy-core.c.patch

@@ -256,7 +256,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
 +EXPORT_SYMBOL(phy_write_mmd);
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -627,14 +627,7 @@ struct phy_fixup {
+@@ -630,14 +630,7 @@ struct phy_fixup {
   *
   * Same rules as for phy_read();
   */
@@ -272,7 +272,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
  
  /**
   * phy_read_mmd_indirect - reads data from the MMD registers
-@@ -728,16 +721,7 @@ static inline bool phy_is_pseudo_fixed_l
+@@ -731,16 +724,7 @@ static inline bool phy_is_pseudo_fixed_l
   *
   * Same rules as for phy_write();
   */

target/linux/mvebu/patches-4.9/402-net-phy-make-phy_-read-write-_mmd-generic-MMD-access.patch

@@ -64,7 +64,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
  EXPORT_SYMBOL(phy_write_mmd);
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -570,6 +570,30 @@ struct phy_driver {
+@@ -573,6 +573,30 @@ struct phy_driver {
  	 */
  	void (*link_change_notify)(struct phy_device *dev);
  

target/linux/mvebu/patches-4.9/403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch

@@ -30,22 +30,27 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
 
 --- a/drivers/net/phy/phy.c
 +++ b/drivers/net/phy/phy.c
-@@ -1343,11 +1343,16 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
+@@ -1343,14 +1343,19 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
   */
  int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
  {
 -	int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
 +	int cap, adv;
  
--	phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, val);
+-	/* Mask prohibited EEE modes */
+-	val &= ~phydev->eee_broken_modes;
 +	/* Get Supported EEE */
 +	cap = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
 +	if (cap < 0)
 +		return cap;
++
++	adv = ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap;
+ 
+-	phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, val);
++	/* Mask prohibited EEE modes */
++	adv &= ~phydev->eee_broken_modes;
  
 -	return 0;
-+	adv = ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap;
-+
 +	return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
  }
  EXPORT_SYMBOL(phy_ethtool_set_eee);

target/linux/mvebu/patches-4.9/404-net-phy-restart-phy-autonegotiation-after-EEE-advert.patch

@@ -12,7 +12,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
 
 --- a/drivers/net/phy/phy.c
 +++ b/drivers/net/phy/phy.c
-@@ -1343,16 +1343,33 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
+@@ -1343,19 +1343,36 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
   */
  int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
  {
@@ -30,6 +30,9 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
 +
  	adv = ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap;
  
+ 	/* Mask prohibited EEE modes */
+ 	adv &= ~phydev->eee_broken_modes;
+ 
 -	return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
 +	if (old_adv != adv) {
 +		ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);

target/linux/mvebu/patches-4.9/407-net-phy-add-802.3-clause-45-support-to-phylib.patch

@@ -258,7 +258,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
 +EXPORT_SYMBOL_GPL(genphy_c45_read_pma);
 --- a/drivers/net/phy/phy_device.c
 +++ b/drivers/net/phy/phy_device.c
-@@ -1410,27 +1410,19 @@ EXPORT_SYMBOL(genphy_read_status);
+@@ -1452,27 +1452,19 @@ EXPORT_SYMBOL(genphy_read_status);
  
  static int gen10g_read_status(struct phy_device *phydev)
  {
@@ -295,7 +295,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
  }
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -807,6 +807,8 @@ static inline const char *phydev_name(co
+@@ -810,6 +810,8 @@ static inline const char *phydev_name(co
  void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
  	__printf(2, 3);
  void phy_attached_info(struct phy_device *phydev);
@@ -304,7 +304,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
  int genphy_config_init(struct phy_device *phydev);
  int genphy_setup_forced(struct phy_device *phydev);
  int genphy_restart_aneg(struct phy_device *phydev);
-@@ -817,6 +819,16 @@ int genphy_read_status(struct phy_device
+@@ -820,6 +822,16 @@ int genphy_read_status(struct phy_device
  int genphy_suspend(struct phy_device *phydev);
  int genphy_resume(struct phy_device *phydev);
  int genphy_soft_reset(struct phy_device *phydev);

target/linux/mvebu/patches-4.9/408-net-phy-hook-up-clause-45-autonegotiation-restart.patch

@@ -37,7 +37,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
  
  /**
   * phy_aneg_done - return auto-negotiation status
-@@ -1439,3 +1457,14 @@ int phy_ethtool_set_link_ksettings(struc
+@@ -1442,3 +1460,14 @@ int phy_ethtool_set_link_ksettings(struc
  	return phy_ethtool_ksettings_set(phydev, cmd);
  }
  EXPORT_SYMBOL(phy_ethtool_set_link_ksettings);

target/linux/mvebu/patches-4.9/411-net-phy-split-out-PHY-speed-and-duplex-string-genera.patch

@@ -91,7 +91,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
  {
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -642,6 +642,9 @@ struct phy_fixup {
+@@ -645,6 +645,9 @@ struct phy_fixup {
  	int (*run)(struct phy_device *phydev);
  };
  

target/linux/mvebu/patches-4.9/412-net-phy-move-phy_lookup_setting-and-guts-of-phy_supp.patch

@@ -305,7 +305,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
  {
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -645,6 +645,21 @@ struct phy_fixup {
+@@ -648,6 +648,21 @@ struct phy_fixup {
  const char *phy_speed_to_str(int speed);
  const char *phy_duplex_to_str(unsigned int duplex);
  

target/linux/mvebu/patches-4.9/415-phylink-add-phylink-infrastructure.patch

@@ -1007,7 +1007,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
  struct sk_buff;
  
  /*
-@@ -422,6 +423,7 @@ struct phy_device {
+@@ -425,6 +426,7 @@ struct phy_device {
  
  	struct mutex lock;
  

target/linux/mvebu/patches-4.9/432-phy-marvell-88E1512-add-flow-control-support.patch

@@ -12,7 +12,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
 
 --- a/drivers/net/phy/marvell.c
 +++ b/drivers/net/phy/marvell.c
-@@ -1679,7 +1679,8 @@ static struct phy_driver marvell_drivers
+@@ -1678,7 +1678,8 @@ static struct phy_driver marvell_drivers
  		.phy_id = MARVELL_PHY_ID_88E1510,
  		.phy_id_mask = MARVELL_PHY_ID_MASK,
  		.name = "Marvell 88E1510",

target/linux/mvebu/patches-4.9/433-phy-marvell-88E1111-add-flow-control-support.patch

@@ -11,7 +11,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
 
 --- a/drivers/net/phy/marvell.c
 +++ b/drivers/net/phy/marvell.c
-@@ -1531,7 +1531,7 @@ static struct phy_driver marvell_drivers
+@@ -1530,7 +1530,7 @@ static struct phy_driver marvell_drivers
  		.phy_id = MARVELL_PHY_ID_88E1111,
  		.phy_id_mask = MARVELL_PHY_ID_MASK,
  		.name = "Marvell 88E1111",

target/linux/mvebu/patches-4.9/434-phy-marvell-88E1540-add-flow-control-support.patch

@@ -11,7 +11,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
 
 --- a/drivers/net/phy/marvell.c
 +++ b/drivers/net/phy/marvell.c
-@@ -1699,7 +1699,7 @@ static struct phy_driver marvell_drivers
+@@ -1698,7 +1698,7 @@ static struct phy_driver marvell_drivers
  		.phy_id = MARVELL_PHY_ID_88E1540,
  		.phy_id_mask = MARVELL_PHY_ID_MASK,
  		.name = "Marvell 88E1540",

target/linux/mvebu/patches-4.9/435-net-phy-fix-marvell-phy-status-reading.patch

@@ -1,26 +0,0 @@
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 23 Dec 2016 18:54:01 +0000
-Subject: [PATCH] net: phy: fix marvell phy status reading
-
-The Marvell driver incorrectly provides phydev->lp_advertising as the
-logical and of the link partner's advert and our advert.  This is
-incorrect - this field is supposed to store the link parter's unmodified
-advertisment.
-
-This allows ethtool to report the correct link partner auto-negotiation
-status.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
-
---- a/drivers/net/phy/marvell.c
-+++ b/drivers/net/phy/marvell.c
-@@ -1114,8 +1114,6 @@ static int marvell_read_status_page(stru
- 		if (adv < 0)
- 			return adv;
- 
--		lpa &= adv;
--
- 		if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
- 			phydev->duplex = DUPLEX_FULL;
- 		else

target/linux/mvebu/patches-4.9/473-fix-marvell-phy-initialization-issues.patch

@@ -49,13 +49,3 @@ Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
  		i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page);
  		if (ret == 0)
  			ret = i;
-@@ -1200,7 +1198,8 @@ static int marvell_read_status(struct ph
- 	int err;
- 
- 	/* Check the fiber mode first */
--	if (phydev->supported & SUPPORTED_FIBRE) {
-+	if (phydev->supported & SUPPORTED_FIBRE &&
-+	    phydev->interface != PHY_INTERFACE_MODE_SGMII) {
- 		err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_FIBER);
- 		if (err < 0)
- 			goto error;

target/linux/pistachio/patches-4.9/401-mtd-nor-support-mtd-name-from-device-tree.patch

@@ -10,7 +10,7 @@ Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
 
 --- a/drivers/mtd/spi-nor/spi-nor.c
 +++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1534,6 +1534,7 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1541,6 +1541,7 @@ int spi_nor_scan(struct spi_nor *nor, co
  	struct device *dev = nor->dev;
  	struct mtd_info *mtd = &nor->mtd;
  	struct device_node *np = spi_nor_get_flash_node(nor);
@@ -18,7 +18,7 @@ Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
  	int ret;
  	int i;
  
-@@ -1598,7 +1599,12 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1605,7 +1606,12 @@ int spi_nor_scan(struct spi_nor *nor, co
  		spi_nor_wait_till_ready(nor);
  	}
  

target/linux/ramips/patches-4.9/0054-mtd-add-chunked-read-io-to-m25p80.patch

@@ -67,7 +67,7 @@
  static int macronix_quad_enable(struct spi_nor *nor)
  {
  	int ret, val;
-@@ -1623,10 +1683,12 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1630,10 +1690,12 @@ int spi_nor_scan(struct spi_nor *nor, co
  	}
  
  	/* sst nor chips use AAI word program */
@@ -82,7 +82,7 @@
  
  	if (info->flags & USE_FSR)
  		nor->flags |= SNOR_F_USE_FSR;
-@@ -1656,11 +1718,20 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1663,11 +1725,20 @@ int spi_nor_scan(struct spi_nor *nor, co
  	mtd->writebufsize = nor->page_size;
  
  	if (np) {