ar71xx: move AP91 specific ethernet initialization into a separate file

SVN-Revision: 19750
This commit is contained in:
Gabor Juhos 2010-02-19 11:52:36 +00:00
parent f6e29416b5
commit ccbfcba859
7 changed files with 72 additions and 49 deletions

View file

@ -6,6 +6,7 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
# CONFIG_AG71XX_DEBUG_FS is not set # CONFIG_AG71XX_DEBUG_FS is not set
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set # CONFIG_ALCHEMY_GPIO_INDIRECT is not set
# CONFIG_AR7 is not set # CONFIG_AR7 is not set
CONFIG_AR71XX_DEV_AP91_ETH=y
CONFIG_AR71XX_DEV_AP91_PCI=y CONFIG_AR71XX_DEV_AP91_PCI=y
CONFIG_AR71XX_DEV_AP94_PCI=y CONFIG_AR71XX_DEV_AP94_PCI=y
CONFIG_AR71XX_DEV_AR913X_WMAC=y CONFIG_AR71XX_DEV_AR913X_WMAC=y

View file

@ -21,6 +21,7 @@ config AR71XX_MACH_AP83
config AR71XX_MACH_DIR_600_A1 config AR71XX_MACH_DIR_600_A1
bool "D-Link DIR-600 rev. A1 support" bool "D-Link DIR-600 rev. A1 support"
select AR71XX_DEV_AP91_ETH
select AR71XX_DEV_AP91_PCI if PCI select AR71XX_DEV_AP91_PCI if PCI
select AR71XX_DEV_M25P80 select AR71XX_DEV_M25P80
select AR71XX_DEV_GPIO_BUTTONS select AR71XX_DEV_GPIO_BUTTONS
@ -148,6 +149,7 @@ config AR71XX_MACH_MZK_W300NH
config AR71XX_MACH_TL_WR741ND config AR71XX_MACH_TL_WR741ND
bool "TP-LINK TL-WR741ND support" bool "TP-LINK TL-WR741ND support"
select AR71XX_DEV_M25P80 select AR71XX_DEV_M25P80
select AR71XX_DEV_AP91_ETH
select AR71XX_DEV_AP91_PCI if PCI select AR71XX_DEV_AP91_PCI if PCI
select AR71XX_DEV_GPIO_BUTTONS select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO select AR71XX_DEV_LEDS_GPIO
@ -207,6 +209,9 @@ config AR71XX_DEV_M25P80
config AR71XX_DEV_AP91_PCI config AR71XX_DEV_AP91_PCI
def_bool n def_bool n
config AR71XX_DEV_AP91_ETH
def_bool n
config AR71XX_DEV_AP94_PCI config AR71XX_DEV_AP94_PCI
def_bool n def_bool n

View file

@ -13,6 +13,7 @@ obj-y := prom.o irq.o setup.o devices.o gpio.o ar71xx.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_AR71XX_DEV_AP91_ETH) += dev-ap91-eth.o
obj-$(CONFIG_AR71XX_DEV_AP91_PCI) += dev-ap91-pci.o obj-$(CONFIG_AR71XX_DEV_AP91_PCI) += dev-ap91-pci.o
obj-$(CONFIG_AR71XX_DEV_AP94_PCI) += dev-ap94-pci.o obj-$(CONFIG_AR71XX_DEV_AP94_PCI) += dev-ap94-pci.o
obj-$(CONFIG_AR71XX_DEV_AR913X_WMAC) += dev-ar913x-wmac.o obj-$(CONFIG_AR71XX_DEV_AR913X_WMAC) += dev-ar913x-wmac.o

View file

@ -0,0 +1,39 @@
/*
* Atheros AP91 reference board ethernet initialization
*
* Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include "devices.h"
void __init ap91_eth_init(u8 *mac_addr)
{
if (mac_addr)
ar71xx_set_mac_base(mac_addr);
/* WAN port */
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0x0;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
/* LAN ports */
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x0;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
ar71xx_add_device_mdio(0x0);
ar71xx_add_device_eth(1);
ar71xx_add_device_eth(0);
}

View file

@ -0,0 +1,21 @@
/*
* Atheros AP91 reference board ethernet initialization
*
* Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef _AR71XX_DEV_AP91_ETH_H
#define _AR71XX_DEV_AP91_ETH_H
#if defined(CONFIG_AR71XX_DEV_AP91_ETH)
void ap91_eth_init(u8 *mac_addr) __init;
#else
static inline void ap91_eth_init(u8 *mac_addr) { }
#endif
#endif /* _AR71XX_DEV_AP91_ETH_H */

View file

@ -16,6 +16,7 @@
#include "machtype.h" #include "machtype.h"
#include "devices.h" #include "devices.h"
#include "dev-m25p80.h" #include "dev-m25p80.h"
#include "dev-ap91-eth.h"
#include "dev-ap91-pci.h" #include "dev-ap91-pci.h"
#include "dev-gpio-buttons.h" #include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h" #include "dev-leds-gpio.h"
@ -110,30 +111,6 @@ static void __init dir_600_a1_setup(void)
u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
/* WAN port */
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0x0;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
/* LAN ports */
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x0;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
ar71xx_add_device_eth(1);
ar71xx_add_device_eth(0);
ar71xx_add_device_m25p80(&dir_600_a1_flash_data); ar71xx_add_device_m25p80(&dir_600_a1_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio), ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
@ -143,6 +120,7 @@ static void __init dir_600_a1_setup(void)
ARRAY_SIZE(dir_600_a1_gpio_buttons), ARRAY_SIZE(dir_600_a1_gpio_buttons),
dir_600_a1_gpio_buttons); dir_600_a1_gpio_buttons);
ap91_eth_init(mac);
ap91_pci_init(ee, NULL); ap91_pci_init(ee, NULL);
} }

View file

@ -1,7 +1,7 @@
/* /*
* TP-LINK TL-WR741ND board support * TP-LINK TL-WR741ND board support
* *
* Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
* *
* This program is free software; you can redistribute it and/or modify it * This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published * under the terms of the GNU General Public License version 2 as published
@ -16,6 +16,7 @@
#include "machtype.h" #include "machtype.h"
#include "devices.h" #include "devices.h"
#include "dev-m25p80.h" #include "dev-m25p80.h"
#include "dev-ap91-eth.h"
#include "dev-ap91-pci.h" #include "dev-ap91-pci.h"
#include "dev-gpio-buttons.h" #include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h" #include "dev-leds-gpio.h"
@ -98,30 +99,6 @@ static void __init tl_wr741nd_setup(void)
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
/* WAN port */
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0x0;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
/* LAN ports */
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x0;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
ar71xx_add_device_eth(1);
ar71xx_add_device_eth(0);
ar71xx_add_device_m25p80(&tl_wr741nd_flash_data); ar71xx_add_device_m25p80(&tl_wr741nd_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio), ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
@ -131,6 +108,7 @@ static void __init tl_wr741nd_setup(void)
ARRAY_SIZE(tl_wr741nd_gpio_buttons), ARRAY_SIZE(tl_wr741nd_gpio_buttons),
tl_wr741nd_gpio_buttons); tl_wr741nd_gpio_buttons);
ap91_eth_init(mac);
ap91_pci_init(ee, NULL); ap91_pci_init(ee, NULL);
} }
MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND", MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",