From c1c95f3563e3f13bc6c6139edc97220f6d6e9d7a Mon Sep 17 00:00:00 2001 From: Tim Yardley Date: Sun, 26 Nov 2006 05:22:01 +0000 Subject: [PATCH] some more build system documentation SVN-Revision: 5646 --- docs/build.tex | 127 +++++++++++++++++++++++++++++++++---------------- 1 file changed, 87 insertions(+), 40 deletions(-) diff --git a/docs/build.tex b/docs/build.tex index a8c8869be0..e9cdaf382c 100644 --- a/docs/build.tex +++ b/docs/build.tex @@ -1,5 +1,5 @@ One of the biggest challenges to getting started with embedded devices is that you -just can't install a copy of Linux and expect to be able to compile a firmware. +can't just install a copy of Linux and expect to be able to compile a firmware. Even if you did remember to install a compiler and every development tool offered, you still wouldn't have the basic set of tools needed to produce a firmware image. The embedded device represents an entirely new hardware platform, which is @@ -9,25 +9,24 @@ your embedded platform, and then use it to compile a basic Linux distribution to run on your device. The process of creating a cross compiler can be tricky, it's not something that's -regularly attempted and so the there's a certain amount of mystery and black magic +regularly attempted and so there's a certain amount of mystery and black magic associated with it. In many cases when you're dealing with embedded devices you'll be provided with a binary copy of a compiler and basic libraries rather than instructions for creating your own -- it's a time saving step but at the same time -often means you'll be using a rather dated set. Likewise, it's also common to be -provided with a patched copy of the Linux kernel from the board or chip vendor, +often means you'll be using a rather dated set of tools. Likewise, it's also common +to be provided with a patched copy of the Linux kernel from the board or chip vendor, but this is also dated and it can be difficult to spot exactly what has been -changed to make the kernel run on the embedded platform. +modified to make the kernel run on the embedded platform. \subsection{Building an image} -OpenWrt takes a different approach to building a firmware, downloading, patching -and compiling everything from scratch, including the cross compiler. Or to put it +OpenWrt takes a different approach to building a firmware; downloading, patching +and compiling everything from scratch, including the cross compiler. To put it in simpler terms, OpenWrt doesn't contain any executables or even sources, it's an automated system for downloading the sources, patching them to work with the given -platform and compiling them correctly for the platform. What this means is that +platform and compiling them correctly for that platform. What this means is that just by changing the template, you can change any step in the process. - As an example, if a new kernel is released, a simple change to one of the Makefiles will download the latest kernel, patch it to run on the embedded platform and produce a new firmware image -- there's no work to be done trying to track down an unmodified @@ -37,7 +36,7 @@ just apply to the kernel, but to anything included with OpenWrt -- It's this one simple understated concept which is what allows OpenWrt to stay on the bleeding edge with the latest compilers, latest kernels and latest applications. -So let's take a look at OpenWrt and see how this all works +So let's take a look at OpenWrt and see how this all works. \subsubsection{Download openwrt} @@ -46,7 +45,7 @@ This article refers to the "Kamikaze" branch of OpenWrt, which can be downloaded subversion using the following command: \begin{Verbatim} -svn co https://svn.openwrt.org/openwrt/trunk kamikaze +$ svn co https://svn.openwrt.org/openwrt/trunk kamikaze \end{Verbatim} Additionally, there's a trac interface on \href{https://dev.openwrt.org/}{https://dev.openwrt.org/} @@ -58,14 +57,14 @@ which can be used to monitor svn commits and browse the sources. There are four key directories in the base: \begin{itemize} - \item tools - \item toolchain - \item package - \item target + \item \texttt{tools} + \item \texttt{toolchain} + \item \texttt{package} + \item \texttt{target} \end{itemize} \texttt{tools} and \texttt{toolchain} refer to common tools which will be -used to build the firmware image and the compiler and c library. +used to build the firmware image, the compiler, and the c library. The result of this is three new directories, \texttt{tool\_build}, which is a temporary directory for building the target independent tools, \texttt{toolchain\_build\_\textit{}} which is used for building the toolchain for a specific architecture, and @@ -73,9 +72,29 @@ which is used for building the toolchain for a specific architecture, and You won't need to do anything with the toolchain directory unless you intend to add a new version of one of the components above. +\begin{itemize} + \item \texttt{tool\_build} + \item \texttt{toolchain\_build\_\textit{}} +\end{itemize} + \texttt{package} is for exactly that -- packages. In an OpenWrt firmware, almost everything is an \texttt{.ipk}, a software package which can be added to the firmware to provide new -features or removed to save space. +features or removed to save space. Note that packages are also maintained outside of the main +trunk and can be obtained from subversion at the following location: + +\begin{Verbatim} +$ svn co https://svn.openwrt.org/openwrt/packages ../packages +\end{Verbatim} + +Those packages can be used to extend the functionality of the build system and need to be +symlinked into the main trunk. Once you do that, the packages will show up in the menu for +configuration. From kamikaze you would do something like this: + +\begin{Verbatim} +$ ls +kamikaze packages +$ ln -s packages/net/nmap kamikaze/package/nmap +\end{Verbatim} \texttt{target} refers to the embedded platform, this contains items which are specific to a specific embedded platform. Of particular interest here is the "\texttt{target/linux}" @@ -87,6 +106,10 @@ Both the target and package steps will use the directory "\texttt{build\_\textit as a temporary directory for compiling. Additionally, anything downloaded by the toolchain, target or package steps will be placed in the "\texttt{dl}" directory. +\begin{itemize} + \item \texttt{build\_\textit{}} + \item \texttt{dl} +\end{itemize} \subsubsection{Building OpenWrt} @@ -96,7 +119,11 @@ simple enough that an inexperienced end user can easily build his or her own cus Running the command "\texttt{make menuconfig}" will bring up OpenWrt's configuration menu screen, through this menu you can select which platform you're targeting, which versions of the toolchain you want to use to build and what packages you want to install into the -firmware image. Similar to the linux kernel config, almost every option has three choices, +firmware image. Note that it will also check to make sure you have the basic dependencies for it +to run correctly. If that fails, you will need to install some more tools in your local environment +before you can begin. + +Similar to the linux kernel config, almost every option has three choices, \texttt{y/m/n} which are represented as follows: \begin{itemize} @@ -137,7 +164,6 @@ and packages will be in the "\texttt{bin/packages}" directory. \subsection{Creating packages} - One of the things that we've attempted to do with OpenWrt's template system is make it incredibly easy to port software to OpenWrt. If you look at a typical package directory in OpenWrt you'll find two things: @@ -159,49 +185,53 @@ simplifies the entire ordeal. Here for example, is \texttt{package/bridge/Makefile}: \begin{Verbatim}[frame=single,numbers=left] +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +# $Id: Makefile 5624 2006-11-23 00:29:07Z nbd $ + include $(TOPDIR)/rules.mk PKG_NAME:=bridge PKG_VERSION:=1.0.6 PKG_RELEASE:=1 -PKG_BUILD_DIR:=$(BUILD_DIR)/bridge-utils-$(PKG_VERSION) PKG_SOURCE:=bridge-utils-$(PKG_VERSION).tar.gz PKG_SOURCE_URL:=@SF/bridge PKG_MD5SUM:=9b7dc52656f5cbec846a7ba3299f73bd PKG_CAT:=zcat +PKG_BUILD_DIR:=$(BUILD_DIR)/bridge-utils-$(PKG_VERSION) + include $(INCLUDE_DIR)/package.mk define Package/bridge - SECTION:=base - CATEGORY:=Network - DEFAULT:=y + SECTION:=net + CATEGORY:=Base system TITLE:=Ethernet bridging configuration utility + DESCRIPTION:=\ + Manage ethernet bridging: a way to connect networks together to \\\ + form a larger network. URL:=http://bridge.sourceforge.net/ endef -define Package/bridge/description -Ethernet bridging configuration utility - Manage ethernet bridging; a way to connect networks together - to form a larger network. -endef - define Build/Configure - $(call Build/Configure/Default, \ - --with-linux-headers=$(LINUX_DIR)) + $(call Build/Configure/Default, \ + --with-linux-headers="$(LINUX_DIR)" \ + ) endef define Package/bridge/install - install -m0755 -d $(1)/usr/sbin - install -m0755 $(PKG_BUILD_DIR)/brctl/brctl \ - $(1)/usr/sbin/ + $(INSTALL_DIR) $(1)/usr/sbin + $(INSTALL_BIN) $(PKG_BUILD_DIR)/brctl/brctl $(1)/usr/sbin/ endef $(eval $(call BuildPackage,bridge)) \end{Verbatim} - As you can see, there's not much work to be done; everything is hidden in other makefiles and abstracted to the point where you only need to specify a few variables. @@ -212,8 +242,6 @@ and abstracted to the point where you only need to specify a few variables. The upstream version number that we're downloading \item \texttt{PKG\_RELEASE} \\ The version of this package Makefile - \item \texttt{PKG\_BUILD\_DIR} \\ - Where to compile the package \item \texttt{PKG\_SOURCE} \\ The filename of the original sources \item \texttt{PKG\_SOURCE\_URL} \\ @@ -222,6 +250,8 @@ and abstracted to the point where you only need to specify a few variables. A checksum to validate the download \item \texttt{PKG\_CAT} \\ How to decompress the sources (zcat, bzcat, unzip) + \item \texttt{PKG\_BUILD\_DIR} \\ + Where to compile the package \end{itemize} The \texttt{PKG\_*} variables define where to download the package from; @@ -231,7 +261,7 @@ The md5sum is used to verify the package was downloaded correctly and uncompressed into \texttt{\$(BUILD\_DIR)}. At the bottom of the file is where the real magic happens, "BuildPackage" is a macro -setup by the earlier include statements. BuildPackage only takes one argument directly -- +set up by the earlier include statements. BuildPackage only takes one argument directly -- the name of the package to be built, in this case "\texttt{bridge}". All other information is taken from the define blocks. This is a way of providing a level of verbosity, it's inherently clear what the contents of the \texttt{description} template in @@ -278,12 +308,21 @@ directly as the Nth argument to \texttt{BuildPackage}. \textbf{\texttt{Package/\textit{}/install}:} \\ A set of commands to copy files out of the compiled source and into the ipkg - which is represented by the \texttt{\$(1)} directory. + which is represented by the \texttt{\$(1)} directory. Note that there are currently + 3 defined install macros: + \begin{itemize} + \item \texttt{INSTALL\_DIR} \\ + install -d -m0755 + \item \texttt{INSTALL\_BIN} \\ + install -m0755 + \item \texttt{INSTALL\_DATA} \\ + install -m0644 + \end{itemize} The reason that some of the defines are prefixed by "\texttt{Package/\textit{}}" and others are simply "\texttt{Build}" is because of the possibility of generating multiple packages from a single source. OpenWrt works under the assumption of one -source per package makefile, but you can split that source into as many packages as +source per package Makefile, but you can split that source into as many packages as desired. Since you only need to compile the sources once, there's one global set of "\texttt{Build}" defines, but you can add as many "Package/" defines as you want by adding extra calls to \texttt{BuildPackage} -- see the dropbear package for an example. @@ -318,3 +357,11 @@ when satisfied, copy the patched sources elsewhere and diff them with the unpatc sources. A warning though - if you go modify anything under \texttt{package/\textit{}} it will remove the old sources and unpack a fresh copy. +Other useful targets include: + +\begin{itemize} + \item \texttt{make package/\textit{}-prepare V=99} + \item \texttt{make package/\textit{}-compile V=99} + \item \texttt{make package/\textit{}-configure V=99} +\end{itemize} +