ramips: add support for Zorlik ZL5900V2

The Zorlik ZL5900V2 is an unbranded clone of HAME MPR-A1/2.  It is
marketed as "3G Wi-Fi Router".  Only the PCB has the model name
"ZL5900V2" printed on it.

Specifications:
- Ralink RT5350F (360 MHz)
- 32 MB RAM
- 8 MB Flash
- 802.11bgn 1T1R
- 1x 10/100 Mbps Ethernet
- 1x USB 2.0 (Type-A)
- 5200 mAh battery

The ramdisk image (not the squashfs sysupgrade image) can be flashed
through the web interface (named "GoAhead") of the factory firmware.
However, as the factory firmware does not cleanly unmount the rootfs
before flashing, the device may hang instead of rebooting after
successful write.  Power cycling the device gets you in OpenWrt where
the squashfs image may be flashed through normal sysupgrade procedure.

Signed-off-by: Vianney le Clément de Saint-Marcq <code@quartic.eu>
This commit is contained in:
Vianney le Clément de Saint-Marcq 2018-04-04 01:19:22 +02:00 committed by Mathias Kresin
parent 80a94aacaf
commit bcf2125142
6 changed files with 109 additions and 1 deletions

View file

@ -532,6 +532,9 @@ zbt-wr8305rt)
set_usb_led "$boardname:green:usb" set_usb_led "$boardname:green:usb"
set_wifi_led "$boardname:green:wifi" set_wifi_led "$boardname:green:wifi"
;; ;;
zorlik,zl5900v2)
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0
;;
zte-q7) zte-q7)
set_wifi_led "$boardname:blue:status" set_wifi_led "$boardname:blue:status"
;; ;;

View file

@ -61,6 +61,7 @@ ramips_setup_interfaces()
widora,neo-32m|\ widora,neo-32m|\
wnce2001|\ wnce2001|\
zbt-cpe102|\ zbt-cpe102|\
zorlik,zl5900v2|\
zte-q7) zte-q7)
ucidef_add_switch "switch0" ucidef_add_switch "switch0"
ucidef_add_switch_attr "switch0" "enable" "false" ucidef_add_switch_attr "switch0" "enable" "false"

View file

@ -153,7 +153,8 @@ get_status_led() {
wli-tx4-ag300n|\ wli-tx4-ag300n|\
y1|\ y1|\
y1s|\ y1s|\
youku-yk1) youku-yk1|\
zorlik,zl5900v2)
status_led="$boardname:blue:power" status_led="$boardname:blue:power"
;; ;;
dlink,dap-1522-a1|\ dlink,dap-1522-a1|\

View file

@ -218,6 +218,7 @@ platform_check_image() {
zbt-wg3526-16M|\ zbt-wg3526-16M|\
zbt-wg3526-32M|\ zbt-wg3526-32M|\
zbt-wr8305rt|\ zbt-wr8305rt|\
zorlik,zl5900v2|\
zte-q7|\ zte-q7|\
youku-yk1) youku-yk1)
[ "$magic" != "27051956" ] && { [ "$magic" != "27051956" ] && {

View file

@ -0,0 +1,95 @@
/dts-v1/;
#include "rt5350.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "zorlik,zl5900v2", "ralink,rt5350-soc";
model = "Zorlik ZL5900V2";
gpio-leds {
compatible = "gpio-leds";
lan {
label = "zl5900v2:green:lan";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
power {
label = "zl5900v2:blue:power";
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "jtag", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
};
&esw {
mediatek,portmap = <0>;
mediatek,portdisable = <0x2f>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};

View file

@ -901,3 +901,10 @@ define Device/kn
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ehci kmod-usb-ledtrig-usbport DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ehci kmod-usb-ledtrig-usbport
endef endef
TARGET_DEVICES += kn TARGET_DEVICES += kn
define Device/zorlik_zl5900v2
DTS := ZL5900V2
DEVICE_TITLE := Zorlik ZL5900V2
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-netdev
endef
TARGET_DEVICES += zorlik_zl5900v2