KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards

Browse source 
SVN-Revision: 22882
This commit is contained in:
Gabor Juhos 2010-09-03 18:14:37 +00:00
parent 2a541325d3
commit b4336a8e2d
13 changed files with 297 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
target/linux/ar71xx/base-files/etc/diag.sh
View file

@ -108,6 +108,9 @@ get_status_led() {
wzr-hp-g300nh)
status_led="wzr-hp-g300nh:green:router"
;;
zcn-1523h-2 | zcn-1523h-5)
status_led="zcn-1523h:amber:init"
;;
esac;
}

24
target/linux/ar71xx/base-files/etc/uci-defaults/zcn-1523h-2 Executable file
View file

@ -0,0 +1,24 @@
#!/bin/sh
#
# Copyright (C) 2010 OpenWrt.org
#
. /lib/ar71xx.sh
board=$(ar71xx_board_name)
zcn_set_leds() {
uci batch <<EOF
set system.led_lan1='led'
set system.led_lan1.name='lan1'
set system.led_lan1.sysfs='zcn-1523h:green:lan1'
set system.led_lan1.trigger='netdev'
set system.led_lan1.dev='eth0'
set system.led_lan1.mode='link tx rx'
commit system
EOF
}
if [ "${board}" == "zcn-1523h-2" ]; then
zcn_set_leds
fi

30
target/linux/ar71xx/base-files/etc/uci-defaults/zcn-1523h-5 Executable file
View file

@ -0,0 +1,30 @@
#!/bin/sh
#
# Copyright (C) 2010 OpenWrt.org
#
. /lib/ar71xx.sh
board=$(ar71xx_board_name)
zcn_set_leds() {
uci batch <<EOF
set system.led_lan1='led'
set system.led_lan1.name='lan1'
set system.led_lan1.sysfs='zcn-1523h:green:lan1'
set system.led_lan1.trigger='netdev'
set system.led_lan1.dev='eth0'
set system.led_lan1.mode='link tx rx'
set system.led_lan2='led'
set system.led_lan2.name='lan2'
set system.led_lan2.sysfs='zcn-1523h:green:lan2'
set system.led_lan2.trigger='netdev'
set system.led_lan2.dev='eth1'
set system.led_lan2.mode='link tx rx'
commit system
EOF
}
if [ "${board}" == "zcn-1523h-5" ]; then
zcn_set_leds
fi

6
target/linux/ar71xx/base-files/lib/ar71xx.sh
View file

@ -121,6 +121,12 @@ ar71xx_board_name() {
*WZR-HP-G300NH)
name="wzr-hp-g300nh"
;;
*ZCN-1523H-2)
name="zcn-1523h-2"
;;
*ZCN-1523H-5)
name="zcn-1523h-5"
;;
*)
name="generic"
;;

7
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View file

@ -96,6 +96,13 @@ platform_check_image() {
}
return 0
;;
zcn-1523h-2 | zcn-1523h-5)
[ "$magic" != "6873" -a "$magic" != "1985" ] && {
echo "Invalid image type."
return 1
}
return 0
;;
routerstation | routerstation-pro | ls-sr71 | pb42 | pb44 | eap7660d )
[ "$magic" != "4349" ] && {
echo "Invalid image. Use *-sysupgrade.bin files on this board"

1
target/linux/ar71xx/config-2.6.32
View file

@ -45,6 +45,7 @@ CONFIG_AR71XX_MACH_WP543=y
CONFIG_AR71XX_MACH_WRT160NL=y
CONFIG_AR71XX_MACH_WRT400N=y
CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
CONFIG_AR71XX_MACH_ZCN_1523H=y
CONFIG_AR71XX_NVRAM=y
CONFIG_AR71XX_WDT=y
CONFIG_AR8216_PHY=y

1
target/linux/ar71xx/config-2.6.33
View file

@ -45,6 +45,7 @@ CONFIG_AR71XX_MACH_WP543=y
CONFIG_AR71XX_MACH_WRT160NL=y
CONFIG_AR71XX_MACH_WRT400N=y
CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
CONFIG_AR71XX_MACH_ZCN_1523H=y
CONFIG_AR71XX_NVRAM=y
CONFIG_AR71XX_WDT=y
CONFIG_AR8216_PHY=y

1
target/linux/ar71xx/config-2.6.34
View file

@ -45,6 +45,7 @@ CONFIG_AR71XX_MACH_WP543=y
CONFIG_AR71XX_MACH_WRT160NL=y
CONFIG_AR71XX_MACH_WRT400N=y
CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
CONFIG_AR71XX_MACH_ZCN_1523H=y
CONFIG_AR71XX_NVRAM=y
CONFIG_AR71XX_WDT=y
CONFIG_AR8216_PHY=y

1
target/linux/ar71xx/config-2.6.35
View file

@ -45,6 +45,7 @@ CONFIG_AR71XX_MACH_WP543=y
CONFIG_AR71XX_MACH_WRT160NL=y
CONFIG_AR71XX_MACH_WRT400N=y
CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
CONFIG_AR71XX_MACH_ZCN_1523H=y
CONFIG_AR71XX_NVRAM=y
CONFIG_AR71XX_WDT=y
CONFIG_AR8216_PHY=y

8
target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
View file

@ -240,6 +240,14 @@ config AR71XX_MACH_EAP7660D
select AR71XX_DEV_LEDS_GPIO
default n
config AR71XX_MACH_ZCN_1523H
bool "Zcomax ZCN-1523H support"
select AR71XX_DEV_M25P80
select AR71XX_DEV_AP91_PCI if PCI
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
default n
endmenu
config AR71XX_DEV_M25P80

1
target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
View file

@ -55,3 +55,4 @@ obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o
obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o
obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o
obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
obj-$(CONFIG_AR71XX_MACH_ZCN_1523H) += mach-zcn-1523h.o

211
target/linux/ar71xx/files/arch/mips/ar71xx/mach-zcn-1523h.c Normal file
View file

@ -0,0 +1,211 @@
/*
* Zcomax ZCN-1523H-2-8/5-16 board support
*
* Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "machtype.h"
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ap91-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define ZCN_1523H_GPIO_BTN_RESET 0
#define ZCN_1523H_GPIO_LED_INIT 11
#define ZCN_1523H_GPIO_LED_LAN1 17
#define ZCN_1523H_2_GPIO_LED_WEAK 13
#define ZCN_1523H_2_GPIO_LED_MEDIUM 14
#define ZCN_1523H_2_GPIO_LED_STRONG 15
#define ZCN_1523H_5_GPIO_LED_UNKNOWN 1
#define ZCN_1523H_5_GPIO_LED_LAN2 13
#define ZCN_1523H_5_GPIO_LED_WEAK 14
#define ZCN_1523H_5_GPIO_LED_MEDIUM 15
#define ZCN_1523H_5_GPIO_LED_STRONG 16
#define ZCN_1523H_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition zcn_1523h_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x040000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "u-boot-env",
.offset = 0x040000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "rootfs",
.offset = 0x050000,
.size = 0x610000,
} , {
.name = "kernel",
.offset = 0x660000,
.size = 0x170000,
} , {
.name = "configure",
.offset = 0x7d0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "mfg",
.offset = 0x7e0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "eeprom",
.offset = 0x7f0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "firmware",
.offset = 0x050000,
.size = 0x780000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data zcn_1523h_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.parts = zcn_1523h_partitions,
.nr_parts = ARRAY_SIZE(zcn_1523h_partitions),
#endif
};
static struct gpio_button zcn_1523h_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.threshold = 3,
.gpio = ZCN_1523H_GPIO_BTN_RESET,
.active_low = 1,
}
};
static struct gpio_led zcn_1523h_leds_gpio[] __initdata = {
{
.name = "zcn-1523h:amber:init",
.gpio = ZCN_1523H_GPIO_LED_INIT,
.active_low = 1,
}, {
.name = "zcn-1523h:green:lan1",
.gpio = ZCN_1523H_GPIO_LED_LAN1,
.active_low = 1,
}
};
static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = {
{
.name = "zcn-1523h:red:weak",
.gpio = ZCN_1523H_2_GPIO_LED_WEAK,
.active_low = 1,
}, {
.name = "zcn-1523h:amber:medium",
.gpio = ZCN_1523H_2_GPIO_LED_MEDIUM,
.active_low = 1,
}, {
.name = "zcn-1523h:green:strong",
.gpio = ZCN_1523H_2_GPIO_LED_STRONG,
.active_low = 1,
}
};
static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = {
{
.name = "zcn-1523h:red:weak",
.gpio = ZCN_1523H_5_GPIO_LED_WEAK,
.active_low = 1,
}, {
.name = "zcn-1523h:amber:medium",
.gpio = ZCN_1523H_5_GPIO_LED_MEDIUM,
.active_low = 1,
}, {
.name = "zcn-1523h:green:strong",
.gpio = ZCN_1523H_5_GPIO_LED_STRONG,
.active_low = 1,
}, {
.name = "zcn-1523h:green:lan2",
.gpio = ZCN_1523H_5_GPIO_LED_LAN2,
.active_low = 1,
}, {
.name = "zcn-1523h:amber:unknown",
.gpio = ZCN_1523H_5_GPIO_LED_UNKNOWN,
}
};
static void __init zcn_1523h_generic_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
ar71xx_add_device_m25p80(&zcn_1523h_flash_data);
ar71xx_add_device_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio),
zcn_1523h_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, ZCN_1523H_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(zcn_1523h_gpio_buttons),
zcn_1523h_gpio_buttons);
ap91_pci_init(ee, mac);
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
/* LAN1 port */
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
/* LAN2 port */
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_add_device_mdio(0x0);
ar71xx_add_device_eth(0);
}
static void __init zcn_1523h_2_setup(void)
{
zcn_1523h_generic_setup();
ar71xx_add_device_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio),
zcn_1523h_2_leds_gpio);
}
MIPS_MACHINE(AR71XX_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2",
zcn_1523h_2_setup);
static void __init zcn_1523h_5_setup(void)
{
zcn_1523h_generic_setup();
ar71xx_add_device_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio),
zcn_1523h_5_leds_gpio);
ar71xx_add_device_eth(1);
}
MIPS_MACHINE(AR71XX_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5",
zcn_1523h_5_setup);

2
target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
View file

@ -56,6 +56,8 @@ enum ar71xx_mach_type {
AR71XX_MACH_WRT400N, /* Linksys WRT400N */
AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
AR71XX_MACH_EAP7660D, /* Senao EAP7660D */
AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
};
#endif /* _AR71XX_MACHTYPE_H */