diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index ac9f368419..9b189b3b9e 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -200,7 +200,6 @@ ramips_setup_interfaces()
 	awm002-evb-8M|\
 	c20i|\
 	dir-645|\
-	f5d8235-v2|\
 	gl-mt300a|\
 	gl-mt300n|\
 	gl-mt750|\
@@ -375,6 +374,7 @@ ramips_setup_interfaces()
 			"0:lan" "2:lan" "6t@eth0"
 		;;
 	f5d8235-v1|\
+	f5d8235-v2|\
 	tew-714tru|\
 	v11st-fe|\
 	wzr-agl300nh)
diff --git a/target/linux/ramips/dts/F5D8235_V2.dts b/target/linux/ramips/dts/F5D8235_V2.dts
index a3a1255941..1a86557ca4 100644
--- a/target/linux/ramips/dts/F5D8235_V2.dts
+++ b/target/linux/ramips/dts/F5D8235_V2.dts
@@ -111,7 +111,7 @@
 &pinctrl {
 	state_default: pinctrl0 {
 		gpio {
-			ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+			ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
 			ralink,function = "gpio";
 		};
 	};
@@ -119,10 +119,21 @@
 
 &ethernet {
 	mtd-mac-address = <&uboot 0x40004>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
 };
 
 &esw {
+	ralink,rgmii = <1>;
 	mediatek,portmap = <0x3f>;
+	ralink,fct2 = <0x0002500c>;
+	/*
+	 * ext phy base addr 31, rx/tx clock skew 0,
+	 * turbo mii off, rgmi 3.3v off, port 5 polling off
+	 * port5: enabled, gige, full-duplex, rx/tx-flow-control
+	 * port6: enabled, gige, full-duplex, rx/tx-flow-control
+	*/
+	ralink,fpa2 = <0x1f003fff>;
 };
 
 &wmac {
diff --git a/target/linux/ramips/image/rt305x.mk b/target/linux/ramips/image/rt305x.mk
index 066cef23cb..cc743c609d 100644
--- a/target/linux/ramips/image/rt305x.mk
+++ b/target/linux/ramips/image/rt305x.mk
@@ -329,6 +329,7 @@ define Device/f5d8235-v2
   DTS := F5D8235_V2
   IMAGE_SIZE := 7744k
   DEVICE_TITLE := Belkin F5D8235 v2
+  DEVICE_PACKAGES := kmod-switch-rtl8366rb
 endef
 TARGET_DEVICES += f5d8235-v2