diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile index ce24dcacb5..42f3e9a5ff 100644 --- a/package/mac80211/Makefile +++ b/package/mac80211/Makefile @@ -17,12 +17,12 @@ ifneq ($(CONFIG_LINUX_2_6_21)$(CONFIG_LINUX_2_6_23)$(CONFIG_LINUX_2_6_24)$(CONFI PKG_MD5SUM:=9563ceeed86bca0859ad5f010623277c PATCH_DIR:=./patches-old else - PKG_VERSION:=2009-03-24 + PKG_VERSION:=2009-03-31 PKG_RELEASE:=1 PKG_SOURCE_URL:= \ http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/03 \ http://wireless.kernel.org/download/compat-wireless-2.6 - PKG_MD5SUM:=9e0574d123b6d6827c56a7c0042173fb + PKG_MD5SUM:=b5b2159081c36dd6c318a28eddf7e646 endif PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2 diff --git a/package/mac80211/patches/007-remove_unused_stuff.patch b/package/mac80211/patches/007-remove_unused_stuff.patch index 64be86468a..dc93a7f1d5 100644 --- a/package/mac80211/patches/007-remove_unused_stuff.patch +++ b/package/mac80211/patches/007-remove_unused_stuff.patch @@ -163,7 +163,7 @@ # USB Drivers ifneq ($(CONFIG_USB),) -@@ -249,22 +249,22 @@ CONFIG_ZD1211RW=m +@@ -249,21 +249,21 @@ CONFIG_ZD1211RW=m # is only wireless RNDIS chip known to date. # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER # it also requires new RNDIS_HOST and CDC_ETHER modules which we add @@ -182,19 +182,17 @@ -CONFIG_AT76C50X_USB=m +# CONFIG_AT76C50X_USB=m - # Activate AR9170 support only on kernel >= 2.6.28. + # Activate AR9170 support only on kernel >= 2.6.29. # The needed USB poison feature was added in this kernel release. - ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 28 && echo yes),yes) --CONFIG_AR9170_COMMON=m + ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 29 && echo yes),yes) -CONFIG_AR9170_USB=m -CONFIG_AR9170_LEDS=y -+# CONFIG_AR9170_COMMON=m +# CONFIG_AR9170_USB=m +# CONFIG_AR9170_LEDS=y endif # RT2500USB does not require firmware -@@ -302,20 +302,20 @@ CONFIG_P54_COMMON=m +@@ -301,20 +301,20 @@ CONFIG_P54_COMMON=m # Sonics Silicon Backplane diff --git a/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch b/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch index 91f5a2ad82..6ef7637b17 100644 --- a/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch +++ b/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch @@ -1,7 +1,7 @@ -From 313314263fda19db8eed94a7d7259b595634212e Mon Sep 17 00:00:00 2001 +From 9ed8a41a30916a79529552872e8d1a6175d37398 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn -Date: Sat, 14 Mar 2009 20:02:51 +0100 -Subject: [PATCH] rt2x00: Move Move pci_dev specific access to rt2x00pci +Date: Sat, 28 Mar 2009 20:30:14 +0100 +Subject: [PATCH 1/9] rt2x00: Move Move pci_dev specific access to rt2x00pci pci_dev->irq and pci_name(pci_dev) access should be limited to rt2x00pci only. This is more generic and allows a rt2x00 pci @@ -16,7 +16,8 @@ Signed-off-by: Ivo van Doorn drivers/net/wireless/rt2x00/rt2x00.h | 18 ++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00pci.c | 16 ++++++++++++---- drivers/net/wireless/rt2x00/rt61pci.c | 7 +------ - 5 files changed, 33 insertions(+), 12 deletions(-) + drivers/net/wireless/rt2x00/rt61pci.h | 6 ------ + 6 files changed, 33 insertions(+), 18 deletions(-) --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -148,3 +149,18 @@ Signed-off-by: Ivo van Doorn if (!rt2x00_rf(&rt2x00dev->chip, RF5225) && !rt2x00_rf(&rt2x00dev->chip, RF5325) && +--- a/drivers/net/wireless/rt2x00/rt61pci.h ++++ b/drivers/net/wireless/rt2x00/rt61pci.h +@@ -63,12 +63,6 @@ + */ + + /* +- * PCI Configuration Header +- */ +-#define PCI_CONFIG_HEADER_VENDOR 0x0000 +-#define PCI_CONFIG_HEADER_DEVICE 0x0002 +- +-/* + * HOST_CMD_CSR: For HOST to interrupt embedded processor + */ + #define HOST_CMD_CSR 0x0008 diff --git a/package/mac80211/patches/301-rt2x00-Fix-Sparse-warning.patch b/package/mac80211/patches/301-rt2x00-Fix-Sparse-warning.patch new file mode 100644 index 0000000000..caac9a4090 --- /dev/null +++ b/package/mac80211/patches/301-rt2x00-Fix-Sparse-warning.patch @@ -0,0 +1,25 @@ +From 0a807e9fbd915d2c0cc30870403a571478a9191b Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn +Date: Sat, 28 Mar 2009 20:31:25 +0100 +Subject: [PATCH 2/9] rt2x00: Fix Sparse warning + +rt2x00link_reset_qual() is not declared in a header, +and is only internally used within rt2x00link.c. +It should be declared as static. + +Signed-off-by: Ivo van Doorn +--- + drivers/net/wireless/rt2x00/rt2x00link.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt2x00link.c ++++ b/drivers/net/wireless/rt2x00/rt2x00link.c +@@ -387,7 +387,7 @@ void rt2x00link_reset_tuner(struct rt2x0 + rt2x00link_antenna_reset(rt2x00dev); + } + +-void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev) ++static void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev) + { + struct link_qual *qual = &rt2x00dev->link.qual; + diff --git a/package/mac80211/patches/302-rt2x00-Don-t-free-register-information-on-suspend.patch b/package/mac80211/patches/302-rt2x00-Don-t-free-register-information-on-suspend.patch new file mode 100644 index 0000000000..11ad79d08c --- /dev/null +++ b/package/mac80211/patches/302-rt2x00-Don-t-free-register-information-on-suspend.patch @@ -0,0 +1,95 @@ +From 76b0fa91af8ca33cd68f52f2d02a05c488777f58 Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn +Date: Sat, 28 Mar 2009 20:32:07 +0100 +Subject: [PATCH 3/9] rt2x00: Don't free register information on suspend + +After suspend & resume the rt2x00 devices won't wakeup +anymore due to a broken register information setup. +The most important problem is the release of the EEPROM +buffer which is completely cleared and never read again +after the suspend. + +Signed-off-by: Ivo van Doorn +--- + drivers/net/wireless/rt2x00/rt2x00pci.c | 18 +----------------- + drivers/net/wireless/rt2x00/rt2x00usb.c | 18 +----------------- + 2 files changed, 2 insertions(+), 34 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt2x00pci.c ++++ b/drivers/net/wireless/rt2x00/rt2x00pci.c +@@ -377,8 +377,6 @@ int rt2x00pci_suspend(struct pci_dev *pc + if (retval) + return retval; + +- rt2x00pci_free_reg(rt2x00dev); +- + pci_save_state(pci_dev); + pci_disable_device(pci_dev); + return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); +@@ -389,7 +387,6 @@ int rt2x00pci_resume(struct pci_dev *pci + { + struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); + struct rt2x00_dev *rt2x00dev = hw->priv; +- int retval; + + if (pci_set_power_state(pci_dev, PCI_D0) || + pci_enable_device(pci_dev) || +@@ -398,20 +395,7 @@ int rt2x00pci_resume(struct pci_dev *pci + return -EIO; + } + +- retval = rt2x00pci_alloc_reg(rt2x00dev); +- if (retval) +- return retval; +- +- retval = rt2x00lib_resume(rt2x00dev); +- if (retval) +- goto exit_free_reg; +- +- return 0; +- +-exit_free_reg: +- rt2x00pci_free_reg(rt2x00dev); +- +- return retval; ++ return rt2x00lib_resume(rt2x00dev); + } + EXPORT_SYMBOL_GPL(rt2x00pci_resume); + #endif /* CONFIG_PM */ +--- a/drivers/net/wireless/rt2x00/rt2x00usb.c ++++ b/drivers/net/wireless/rt2x00/rt2x00usb.c +@@ -702,8 +702,6 @@ int rt2x00usb_suspend(struct usb_interfa + if (retval) + return retval; + +- rt2x00usb_free_reg(rt2x00dev); +- + /* + * Decrease usbdev refcount. + */ +@@ -717,24 +715,10 @@ int rt2x00usb_resume(struct usb_interfac + { + struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); + struct rt2x00_dev *rt2x00dev = hw->priv; +- int retval; + + usb_get_dev(interface_to_usbdev(usb_intf)); + +- retval = rt2x00usb_alloc_reg(rt2x00dev); +- if (retval) +- return retval; +- +- retval = rt2x00lib_resume(rt2x00dev); +- if (retval) +- goto exit_free_reg; +- +- return 0; +- +-exit_free_reg: +- rt2x00usb_free_reg(rt2x00dev); +- +- return retval; ++ return rt2x00lib_resume(rt2x00dev); + } + EXPORT_SYMBOL_GPL(rt2x00usb_resume); + #endif /* CONFIG_PM */ diff --git a/package/mac80211/patches/303-rt2x00-Add-rt73usb-USB-IDs.patch b/package/mac80211/patches/303-rt2x00-Add-rt73usb-USB-IDs.patch new file mode 100644 index 0000000000..7b66c6c258 --- /dev/null +++ b/package/mac80211/patches/303-rt2x00-Add-rt73usb-USB-IDs.patch @@ -0,0 +1,21 @@ +From b587a44d6cf038cac3ce194c49196f501fa4bb48 Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn +Date: Sat, 28 Mar 2009 20:32:50 +0100 +Subject: [PATCH 4/9] rt2x00: Add rt73usb USB IDs + +Signed-off-by: Ivo van Doorn +--- + drivers/net/wireless/rt2x00/rt73usb.c | 2 ++ + 1 files changed, 2 insertions(+), 0 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt73usb.c ++++ b/drivers/net/wireless/rt2x00/rt73usb.c +@@ -2369,6 +2369,8 @@ static struct usb_device_id rt73usb_devi + /* Buffalo */ + { USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) }, ++ { USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) }, ++ { USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) }, + /* CNet */ + { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) }, diff --git a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch b/package/mac80211/patches/304-rt2x00-Implement-support-for-802.11n.patch similarity index 98% rename from package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch rename to package/mac80211/patches/304-rt2x00-Implement-support-for-802.11n.patch index 6106789c3f..b1b75751bf 100644 --- a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch +++ b/package/mac80211/patches/304-rt2x00-Implement-support-for-802.11n.patch @@ -1,7 +1,7 @@ -From 827327792c4b0d4d4909ec27bd56cb3ba8f2b754 Mon Sep 17 00:00:00 2001 +From 0f4396e5a4351ccd48256407b4a606d6c33a94cb Mon Sep 17 00:00:00 2001 From: Ivo van Doorn -Date: Sat, 14 Mar 2009 20:06:48 +0100 -Subject: [PATCH] rt2x00: Implement support for 802.11n +Date: Sat, 28 Mar 2009 20:37:26 +0100 +Subject: [PATCH 5/9] rt2x00: Implement support for 802.11n Extend rt2x00lib capabilities to support 802.11n, it still lacks aggregation support, but that can diff --git a/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch b/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch deleted file mode 100644 index 2bd4eb295b..0000000000 --- a/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 6bdf6a86854bdeab9557f0ce25c3f5401c18f629 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn -Date: Sat, 14 Mar 2009 20:57:27 +0100 -Subject: [PATCH] rt2x00: rt2x00: Move Move pci_dev specific access to rt2x00pci - part 2 - -Signed-off-by: Ivo van Doorn ---- - drivers/net/wireless/rt2x00/rt61pci.h | 6 ------ - 1 files changed, 0 insertions(+), 6 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt61pci.h -+++ b/drivers/net/wireless/rt2x00/rt61pci.h -@@ -63,12 +63,6 @@ - */ - - /* -- * PCI Configuration Header -- */ --#define PCI_CONFIG_HEADER_VENDOR 0x0000 --#define PCI_CONFIG_HEADER_DEVICE 0x0002 -- --/* - * HOST_CMD_CSR: For HOST to interrupt embedded processor - */ - #define HOST_CMD_CSR 0x0008 diff --git a/package/mac80211/patches/305-rt2x00-Add-rt2x00soc-bus-module.patch b/package/mac80211/patches/305-rt2x00-Add-rt2x00soc-bus-module.patch new file mode 100644 index 0000000000..b09b0d6392 --- /dev/null +++ b/package/mac80211/patches/305-rt2x00-Add-rt2x00soc-bus-module.patch @@ -0,0 +1,247 @@ +From 18b2be31a35dc8bd216e60e3c9d8d8e7b2179aed Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn +Date: Sat, 28 Mar 2009 20:38:40 +0100 +Subject: [PATCH 6/9] rt2x00: Add rt2x00soc bus module + +Add new library module for SoC drivers. +This is needed to fully support the platform +driver part of rt2800pci. + +Signed-off-by: Felix Fietkau +Signed-off-by: Ivo van Doorn +--- + drivers/net/wireless/rt2x00/Kconfig | 4 + + drivers/net/wireless/rt2x00/Makefile | 1 + + drivers/net/wireless/rt2x00/rt2x00soc.c | 159 +++++++++++++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2x00soc.h | 52 ++++++++++ + 4 files changed, 216 insertions(+), 0 deletions(-) + create mode 100644 drivers/net/wireless/rt2x00/rt2x00soc.c + create mode 100644 drivers/net/wireless/rt2x00/rt2x00soc.h + +--- a/drivers/net/wireless/rt2x00/Makefile ++++ b/drivers/net/wireless/rt2x00/Makefile +@@ -12,6 +12,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_HT) += rt2 + + obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o + obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o ++obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o + obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o + obj-$(CONFIG_RT2400PCI) += rt2400pci.o + obj-$(CONFIG_RT2500PCI) += rt2500pci.o +--- /dev/null ++++ b/drivers/net/wireless/rt2x00/rt2x00soc.c +@@ -0,0 +1,159 @@ ++/* ++ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project ++ ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the ++ Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++/* ++ Module: rt2x00soc ++ Abstract: rt2x00 generic soc device routines. ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include "rt2x00.h" ++#include "rt2x00soc.h" ++ ++static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev) ++{ ++ kfree(rt2x00dev->rf); ++ rt2x00dev->rf = NULL; ++ ++ kfree(rt2x00dev->eeprom); ++ rt2x00dev->eeprom = NULL; ++} ++ ++static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev) ++{ ++ struct platform_device *pdev = to_platform_device(rt2x00dev->dev); ++ struct resource *res; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) ++ return -ENODEV; ++ ++ rt2x00dev->csr.base = (void __iomem *)KSEG1ADDR(res->start); ++ if (!rt2x00dev->csr.base) ++ goto exit; ++ ++ rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); ++ if (!rt2x00dev->eeprom) ++ goto exit; ++ ++ rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); ++ if (!rt2x00dev->rf) ++ goto exit; ++ ++ return 0; ++ ++exit: ++ ERROR_PROBE("Failed to allocate registers.\n"); ++ rt2x00soc_free_reg(rt2x00dev); ++ ++ return -ENOMEM; ++} ++ ++int rt2x00soc_probe(struct platform_device *pdev, ++ const unsigned short chipset, ++ const struct rt2x00_ops *ops) ++{ ++ struct ieee80211_hw *hw; ++ struct rt2x00_dev *rt2x00dev; ++ int retval; ++ ++ hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); ++ if (!hw) { ++ ERROR_PROBE("Failed to allocate hardware.\n"); ++ return -ENOMEM; ++ } ++ ++ platform_set_drvdata(pdev, hw); ++ ++ rt2x00dev = hw->priv; ++ rt2x00dev->dev = &pdev->dev; ++ rt2x00dev->ops = ops; ++ rt2x00dev->hw = hw; ++ rt2x00dev->irq = platform_get_irq(pdev, 0); ++ rt2x00dev->name = pdev->dev.driver->name; ++ ++ rt2x00_set_chip_rt(rt2x00dev, chipset); ++ ++ retval = rt2x00soc_alloc_reg(rt2x00dev); ++ if (retval) ++ goto exit_free_device; ++ ++ retval = rt2x00lib_probe_dev(rt2x00dev); ++ if (retval) ++ goto exit_free_reg; ++ ++ return 0; ++ ++exit_free_reg: ++ rt2x00soc_free_reg(rt2x00dev); ++ ++exit_free_device: ++ ieee80211_free_hw(hw); ++ ++ return retval; ++} ++ ++int rt2x00soc_remove(struct platform_device *pdev) ++{ ++ struct ieee80211_hw *hw = platform_get_drvdata(pdev); ++ struct rt2x00_dev *rt2x00dev = hw->priv; ++ ++ /* ++ * Free all allocated data. ++ */ ++ rt2x00lib_remove_dev(rt2x00dev); ++ rt2x00soc_free_reg(rt2x00dev); ++ ieee80211_free_hw(hw); ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(rt2x00soc_remove); ++ ++#ifdef CONFIG_PM ++int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ struct ieee80211_hw *hw = platform_get_drvdata(pdev); ++ struct rt2x00_dev *rt2x00dev = hw->priv; ++ ++ return rt2x00lib_suspend(rt2x00dev, state); ++} ++EXPORT_SYMBOL_GPL(rt2x00soc_suspend); ++ ++int rt2x00soc_resume(struct platform_device *pdev) ++{ ++ struct ieee80211_hw *hw = platform_get_drvdata(pdev); ++ struct rt2x00_dev *rt2x00dev = hw->priv; ++ ++ return rt2x00lib_resume(rt2x00dev); ++} ++EXPORT_SYMBOL_GPL(rt2x00soc_resume); ++#endif /* CONFIG_PM */ ++ ++/* ++ * rt2x00soc module information. ++ */ ++MODULE_AUTHOR(DRV_PROJECT); ++MODULE_VERSION(DRV_VERSION); ++MODULE_DESCRIPTION("rt2x00 soc library"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/net/wireless/rt2x00/rt2x00soc.h +@@ -0,0 +1,52 @@ ++/* ++ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project ++ ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the ++ Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++/* ++ Module: rt2x00soc ++ Abstract: Data structures for the rt2x00soc module. ++ */ ++ ++#ifndef RT2X00SOC_H ++#define RT2X00SOC_H ++ ++#define KSEG1ADDR(__ptr) __ptr ++ ++#define __rt2x00soc_probe(__chipset, __ops) \ ++static int __rt2x00soc_probe(struct platform_device *pdev) \ ++{ \ ++ return rt2x00soc_probe(pdev, (__chipset), (__ops)); \ ++} ++ ++/* ++ * SoC driver handlers. ++ */ ++int rt2x00soc_probe(struct platform_device *pdev, ++ const unsigned short chipset, ++ const struct rt2x00_ops *ops); ++int rt2x00soc_remove(struct platform_device *pdev); ++#ifdef CONFIG_PM ++int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state); ++int rt2x00soc_resume(struct platform_device *pdev); ++#else ++#define rt2x00soc_suspend NULL ++#define rt2x00soc_resume NULL ++#endif /* CONFIG_PM */ ++ ++#endif /* RT2X00SOC_H */ diff --git a/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch b/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch deleted file mode 100644 index 783a6d609e..0000000000 --- a/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch +++ /dev/null @@ -1,25 +0,0 @@ -From a3334c89fbed644bb12ee27e2d9c1dc70b1512ab Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn -Date: Sat, 14 Mar 2009 20:58:12 +0100 -Subject: [PATCH] rt2x00: rt2x00: Move Move pci_dev specific access to rt2x00pci - part 2 (rt2800pci) - -Signed-off-by: Ivo van Doorn ---- - drivers/net/wireless/rt2x00/rt2800pci.h | 6 ------ - 1 files changed, 0 insertions(+), 6 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.h -+++ b/drivers/net/wireless/rt2x00/rt2800pci.h -@@ -83,12 +83,6 @@ - */ - - /* -- * PCI Configuration Header -- */ --#define PCI_CONFIG_HEADER_VENDOR 0x0000 --#define PCI_CONFIG_HEADER_DEVICE 0x0002 -- --/* - * E2PROM_CSR: EEPROM control register. - * RELOAD: Write 1 to reload eeprom content. - * TYPE: 0: 93c46, 1:93c66. diff --git a/package/mac80211/patches/306-rt2x00-Add-calibration-fields-to-rt2x00dev-rt2x00h.patch b/package/mac80211/patches/306-rt2x00-Add-calibration-fields-to-rt2x00dev-rt2x00h.patch new file mode 100644 index 0000000000..533c96c9c6 --- /dev/null +++ b/package/mac80211/patches/306-rt2x00-Add-calibration-fields-to-rt2x00dev-rt2x00h.patch @@ -0,0 +1,25 @@ +From 7f759a5e56f64fed24e5eb487003ce455786bc31 Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn +Date: Sat, 28 Mar 2009 20:44:18 +0100 +Subject: [PATCH 7/9] rt2x00: Add calibration fields to rt2x00dev (rt2x00ht) + +Signed-off-by: Ivo van Doorn +--- + drivers/net/wireless/rt2x00/rt2x00.h | 6 ++++++ + 1 files changed, 6 insertions(+), 0 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt2x00.h ++++ b/drivers/net/wireless/rt2x00/rt2x00.h +@@ -782,6 +782,12 @@ struct rt2x00_dev { + u8 freq_offset; + + /* ++ * Calibration information (for rt2800usb). ++ */ ++ u8 calibration_bw20; ++ u8 calibration_bw40; ++ ++ /* + * Low level statistics which will have + * to be kept up to date while device is running. + */ diff --git a/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch b/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch deleted file mode 100644 index 4f832939c9..0000000000 --- a/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 14f870b27b836acee5f04809287175016ca16b05 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn -Date: Sun, 15 Mar 2009 15:13:58 +0100 -Subject: [PATCH] rt2x00: Fix module loading in case of error (rt2800pci) - -Signed-off-by: Ivo van Doorn ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 9 +++++++++ - 1 files changed, 9 insertions(+), 0 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -3014,10 +3014,19 @@ static int __init rt2800pci_init(void) - - #ifdef CONFIG_RT2800PCI_WISOC - ret = platform_driver_register(&rt2800soc_driver); -+ if (ret) -+ return ret; - #endif - #ifdef CONFIG_RT2800PCI_PCI - ret = pci_register_driver(&rt2800pci_driver); -+ if (ret) { -+#ifdef CONFIG_RT2800PCI_WISOC -+ platform_driver_unregister(&rt2800soc_driver); -+#endif -+ return ret; -+ } - #endif -+ - return ret; - } - diff --git a/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch b/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch deleted file mode 100644 index d08e5fecfd..0000000000 --- a/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch +++ /dev/null @@ -1,80 +0,0 @@ -From aef81259a944186a120d51e4462a5f974de99fb8 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn -Date: Sun, 15 Mar 2009 15:37:29 +0100 -Subject: [PATCH] rt2x00: Add PM support for SoC (rt2800pci) - -Signed-off-by: Ivo van Doorn ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 52 +++++++++++++++++++++++++++++-- - 1 files changed, 49 insertions(+), 3 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -2934,7 +2934,7 @@ exit: - - static int rt2800soc_probe(struct platform_device *pdev) - { -- const struct rt2x00_ops *ops = &rt2800pci_ops; -+ struct rt2x00_ops *ops = (struct rt2x00_ops *)pdev->driver->p; - struct ieee80211_hw *hw; - struct rt2x00_dev *rt2x00dev; - int retval; -@@ -2990,10 +2990,56 @@ static int rt2800soc_remove(struct platf - return 0; - } - -+#ifdef CONFIG_PM -+int rt2x00soc_suspend(struct device *dev, pm_message_t state) -+{ -+ struct ieee80211_hw *hw = dev_get_drvdata(dev); -+ struct rt2x00_dev *rt2x00dev = hw->priv; -+ int retval; -+ -+ retval = rt2x00lib_suspend(rt2x00dev, state); -+ if (retval) -+ return retval; -+ -+ rt2800soc_free_reg(rt2x00dev); -+ -+ return 0; -+} -+ -+int rt2x00soc_resume(struct device *dev) -+{ -+ struct ieee80211_hw *hw = dev_get_drvdata(dev); -+ struct rt2x00_dev *rt2x00dev = hw->priv; -+ int retval; -+ -+ retval = rt2x00soc_alloc_reg(rt2x00dev); -+ if (retval) -+ return retval; -+ -+ retval = rt2x00lib_resume(rt2x00dev); -+ if (retval) -+ goto exit_free_reg; -+ -+ return 0; -+ -+exit_free_reg: -+ rt2x00pci_free_reg(rt2x00dev); -+ -+ return retval; -+} -+#endif /* CONFIG_PM */ -+ - static struct platform_driver rt2800soc_driver = { -- .driver.name = "rt2800_wmac", -+ .driver = { -+ .name = "rt2800_wmac", -+ .owner = THIS_MODULE, -+ .mod_name = KBUILD_MODNAME, -+ .p = &rt2800pci_ops; -+ } - .probe = rt2800soc_probe, -- .remove = rt2800soc_remove, -+ .remove = __devexit_p(rt2800soc_remove), -+ .suspend = rt2x00soc_suspend, -+ .resume = rt2x00soc_resume, - }; - #endif /* CONFIG_RT2800PCI_WISOC */ - diff --git a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch b/package/mac80211/patches/307-rt2x00-Implement-support-for-rt2800pci.patch similarity index 93% rename from package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch rename to package/mac80211/patches/307-rt2x00-Implement-support-for-rt2800pci.patch index 9cd2289e06..6b66d85236 100644 --- a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch +++ b/package/mac80211/patches/307-rt2x00-Implement-support-for-rt2800pci.patch @@ -1,7 +1,7 @@ -From a34c288f7214637f214ec17fb2b35dd5d20b0634 Mon Sep 17 00:00:00 2001 +From b7dcb460c4c441ce52b3c5ce30d65e1ecfbb30ad Mon Sep 17 00:00:00 2001 From: Ivo van Doorn -Date: Sat, 14 Mar 2009 20:41:58 +0100 -Subject: [PATCH] rt2x00: Implement support for rt2800pci +Date: Sat, 28 Mar 2009 20:46:46 +0100 +Subject: [PATCH 8/9] rt2x00: Implement support for rt2800pci Add support for the rt2800pci chipset. @@ -13,18 +13,18 @@ Signed-off-by: Mark Asselstine Signed-off-by: Felix Fietkau Signed-off-by: Ivo van Doorn --- - drivers/net/wireless/rt2x00/Kconfig | 15 + + drivers/net/wireless/rt2x00/Kconfig | 26 + drivers/net/wireless/rt2x00/Makefile | 1 + - drivers/net/wireless/rt2x00/rt2800pci.c | 3035 +++++++++++++++++++++++++++++++ - drivers/net/wireless/rt2x00/rt2800pci.h | 1880 +++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2800pci.c | 3244 +++++++++++++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2800pci.h | 1927 ++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00.h | 6 + - 5 files changed, 4937 insertions(+), 0 deletions(-) + 5 files changed, 5204 insertions(+), 0 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile -@@ -16,5 +16,6 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00u +@@ -17,5 +17,6 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00u obj-$(CONFIG_RT2400PCI) += rt2400pci.o obj-$(CONFIG_RT2500PCI) += rt2500pci.o obj-$(CONFIG_RT61PCI) += rt61pci.o @@ -33,7 +33,7 @@ Signed-off-by: Ivo van Doorn obj-$(CONFIG_RT73USB) += rt73usb.o --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -0,0 +1,3035 @@ +@@ -0,0 +1,3244 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + @@ -72,13 +72,14 @@ Signed-off-by: Ivo van Doorn + +#include "rt2x00.h" +#include "rt2x00pci.h" ++#include "rt2x00soc.h" +#include "rt2800pci.h" + -+/* FIXME: Make Kconfig dependent */ -+#ifdef CONFIG_PCI ++#ifdef CONFIG_RT2800PCI_PCI_MODULE +#define CONFIG_RT2800PCI_PCI +#endif -+#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) ++ ++#ifdef CONFIG_RT2800PCI_WISOC_MODULE +#define CONFIG_RT2800PCI_WISOC +#endif + @@ -102,6 +103,8 @@ Signed-off-by: Ivo van Doorn + */ +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) ++#define WAIT_FOR_RFCSR(__dev, __reg) \ ++ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) +#define WAIT_FOR_MCU(__dev, __reg) \ @@ -165,6 +168,61 @@ Signed-off-by: Ivo van Doorn + mutex_unlock(&rt2x00dev->csr_mutex); +} + ++static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev, ++ const unsigned int word, const u8 value) ++{ ++ u32 reg; ++ ++ mutex_lock(&rt2x00dev->csr_mutex); ++ ++ /* ++ * Wait until the RFCSR becomes available, afterwards we ++ * can safely write the new data into the register. ++ */ ++ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { ++ reg = 0; ++ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); ++ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); ++ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); ++ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); ++ ++ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg); ++ } ++ ++ mutex_unlock(&rt2x00dev->csr_mutex); ++} ++ ++static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev, ++ const unsigned int word, u8 *value) ++{ ++ u32 reg; ++ ++ mutex_lock(&rt2x00dev->csr_mutex); ++ ++ /* ++ * Wait until the RFCSR becomes available, afterwards we ++ * can safely write the read request into the register. ++ * After the data has been written, we wait until hardware ++ * returns the correct value, if at any time the register ++ * doesn't become available in time, reg will be 0xffffffff ++ * which means we return 0xff to the caller. ++ */ ++ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { ++ reg = 0; ++ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); ++ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); ++ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); ++ ++ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg); ++ ++ WAIT_FOR_RFCSR(rt2x00dev, ®); ++ } ++ ++ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); ++ ++ mutex_unlock(&rt2x00dev->csr_mutex); ++} ++ +static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) +{ @@ -196,6 +254,13 @@ Signed-off-by: Ivo van Doorn +{ + u32 reg; + ++ /* ++ * RT2880 and RT3052 don't support MCU requests. ++ */ ++ if (rt2x00_rt(&rt2x00dev->chip, RT2880) || ++ rt2x00_rt(&rt2x00dev->chip, RT3052)) ++ return; ++ + mutex_lock(&rt2x00dev->csr_mutex); + + /* @@ -765,13 +830,11 @@ Signed-off-by: Ivo van Doorn + rt2x00dev->lna_gain = lna_gain; +} + -+static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev, -+ struct ieee80211_conf *conf, -+ struct rf_channel *rf, -+ struct channel_info *info) ++static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, ++ struct ieee80211_conf *conf, ++ struct rf_channel *rf, ++ struct channel_info *info) +{ -+ u32 reg; -+ unsigned int tx_pin; + u16 eeprom; + + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); @@ -781,9 +844,8 @@ Signed-off-by: Ivo van Doorn + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + -+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) { ++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); -+ } + + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) { + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); @@ -842,6 +904,62 @@ Signed-off-by: Ivo van Doorn + rt2800pci_rf_write(rt2x00dev, 2, rf->rf2); + rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800pci_rf_write(rt2x00dev, 4, rf->rf4); ++} ++ ++static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, ++ struct ieee80211_conf *conf, ++ struct rf_channel *rf, ++ struct channel_info *info) ++{ ++ u8 rfcsr; ++ ++ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1); ++ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3); ++ ++ rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); ++ rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr); ++ ++ rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, ++ TXPOWER_G_TO_DEV(info->tx_power1)); ++ rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr); ++ ++ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); ++ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr); ++ ++ if (conf_is_ht40(conf)) ++ rt2800pci_rfcsr_write(rt2x00dev, 24, ++ rt2x00dev->calibration_bw40); ++ else ++ rt2800pci_rfcsr_write(rt2x00dev, 24, ++ rt2x00dev->calibration_bw20); ++ ++ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); ++ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr); ++} ++ ++static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev, ++ struct ieee80211_conf *conf, ++ struct rf_channel *rf, ++ struct channel_info *info) ++{ ++ u32 reg; ++ unsigned int tx_pin; ++ u16 eeprom; ++ u8 bbp; ++ ++ /* ++ * Determine antenna settings from EEPROM ++ */ ++ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); ++ ++ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) ++ rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info); ++ else ++ rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info); + + /* + * Change BBP settings @@ -897,6 +1015,26 @@ Signed-off-by: Ivo van Doorn + + rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); + ++ rt2800pci_bbp_read(rt2x00dev, 4, &bbp); ++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); ++ rt2800pci_bbp_write(rt2x00dev, 4, bbp); ++ ++ rt2800pci_bbp_read(rt2x00dev, 3, &bbp); ++ rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); ++ rt2800pci_bbp_write(rt2x00dev, 3, bbp); ++ ++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { ++ if (conf_is_ht40(conf)) { ++ rt2800pci_bbp_write(rt2x00dev, 69, 0x1a); ++ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a); ++ rt2800pci_bbp_write(rt2x00dev, 73, 0x16); ++ } else { ++ rt2800pci_bbp_write(rt2x00dev, 69, 0x16); ++ rt2800pci_bbp_write(rt2x00dev, 70, 0x08); ++ rt2800pci_bbp_write(rt2x00dev, 73, 0x11); ++ } ++ } ++ + msleep(1); +} + @@ -1301,7 +1439,7 @@ Signed-off-by: Ivo van Doorn + entry_priv = rt2x00dev->rx->entries[0].priv_data; + rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma); + rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit); -+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, 0); ++ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1); + rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0); + + /* @@ -1659,6 +1797,12 @@ Signed-off-by: Ivo van Doorn + if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) + rt2800pci_bbp_write(rt2x00dev, 84, 0x19); + ++ if (rt2x00_rt(&rt2x00dev->chip, RT3052)) { ++ rt2800pci_bbp_write(rt2x00dev, 31, 0x08); ++ rt2800pci_bbp_write(rt2x00dev, 78, 0x0e); ++ rt2800pci_bbp_write(rt2x00dev, 80, 0x08); ++ } ++ + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); + @@ -1672,6 +1816,144 @@ Signed-off-by: Ivo van Doorn + return 0; +} + ++static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev, ++ bool bw40, u8 rfcsr24, u8 filter_target) ++{ ++ unsigned int i; ++ u8 bbp; ++ u8 rfcsr; ++ u8 passband; ++ u8 stopband; ++ u8 overtuned = 0; ++ ++ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); ++ ++ rt2800pci_bbp_read(rt2x00dev, 4, &bbp); ++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); ++ rt2800pci_bbp_write(rt2x00dev, 4, bbp); ++ ++ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); ++ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr); ++ ++ /* ++ * Set power & frequency of passband test tone ++ */ ++ rt2800pci_bbp_write(rt2x00dev, 24, 0); ++ ++ for (i = 0; i < 100; i++) { ++ rt2800pci_bbp_write(rt2x00dev, 25, 0x90); ++ msleep(1); ++ ++ rt2800pci_bbp_read(rt2x00dev, 55, &passband); ++ if (passband) ++ break; ++ } ++ ++ /* ++ * Set power & frequency of stopband test tone ++ */ ++ rt2800pci_bbp_write(rt2x00dev, 24, 0x06); ++ ++ for (i = 0; i < 100; i++) { ++ rt2800pci_bbp_write(rt2x00dev, 25, 0x90); ++ msleep(1); ++ ++ rt2800pci_bbp_read(rt2x00dev, 55, &stopband); ++ ++ if ((passband - stopband) <= filter_target) { ++ rfcsr24++; ++ overtuned += ((passband - stopband) == filter_target); ++ } else ++ break; ++ ++ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); ++ } ++ ++ rfcsr24 -= !!overtuned; ++ ++ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); ++ return rfcsr24; ++} ++ ++static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev) ++{ ++ u8 rfcsr; ++ u8 bbp; ++ ++ if (!rt2x00_rf(&rt2x00dev->chip, RF3020) && ++ !rt2x00_rf(&rt2x00dev->chip, RF3021) && ++ !rt2x00_rf(&rt2x00dev->chip, RF3022)) ++ return 0; ++ ++ /* ++ * Init RF calibration. ++ */ ++ rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); ++ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr); ++ msleep(1); ++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); ++ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr); ++ ++ rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50); ++ rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01); ++ rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7); ++ rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75); ++ rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40); ++ rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03); ++ rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02); ++ rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50); ++ rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39); ++ rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f); ++ rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60); ++ rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21); ++ rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75); ++ rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75); ++ rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90); ++ rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58); ++ rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3); ++ rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92); ++ rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c); ++ rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02); ++ rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba); ++ rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb); ++ rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00); ++ rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31); ++ rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08); ++ rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01); ++ rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25); ++ rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23); ++ rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13); ++ rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83); ++ ++ /* ++ * Set RX Filter calibration for 20MHz and 40MHz ++ */ ++ rt2x00dev->calibration_bw20 = ++ rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16); ++ rt2x00dev->calibration_bw40 = ++ rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19); ++ ++ /* ++ * Set back to initial state ++ */ ++ rt2800pci_bbp_write(rt2x00dev, 24, 0); ++ ++ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); ++ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr); ++ ++ /* ++ * set BBP back to BW20 ++ */ ++ rt2800pci_bbp_read(rt2x00dev, 4, &bbp); ++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); ++ rt2800pci_bbp_write(rt2x00dev, 4, bbp); ++ ++ return 0; ++} ++ +/* + * Device state switch handlers. + */ @@ -1754,7 +2036,8 @@ Signed-off-by: Ivo van Doorn + rt2800pci_init_queues(rt2x00dev) || + rt2800pci_init_registers(rt2x00dev) || + rt2800pci_wait_wpdma_ready(rt2x00dev) || -+ rt2800pci_init_bbp(rt2x00dev))) ++ rt2800pci_init_bbp(rt2x00dev) || ++ rt2800pci_init_rfcsr(rt2x00dev))) + return -EIO; + + /* @@ -2150,6 +2433,12 @@ Signed-off-by: Ivo van Doorn + rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); + + /* ++ * Set RX IDX in register to inform hardware that we have handled ++ * this entry and it is available for reuse again. ++ */ ++ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx); ++ ++ /* + * Remove TXWI descriptor from start of buffer. + */ + skb_pull(entry->skb, RXWI_DESC_SIZE); @@ -2416,7 +2705,8 @@ Signed-off-by: Ivo van Doorn + !rt2x00_rf(&rt2x00dev->chip, RF2750) && + !rt2x00_rf(&rt2x00dev->chip, RF3020) && + !rt2x00_rf(&rt2x00dev->chip, RF2020) && -+ !rt2x00_rf(&rt2x00dev->chip, RF3052)) { ++ !rt2x00_rf(&rt2x00dev->chip, RF3021) && ++ !rt2x00_rf(&rt2x00dev->chip, RF3022)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } @@ -2496,8 +2786,8 @@ Signed-off-by: Ivo van Doorn + /* 802.11 HyperLan 2 */ + { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, + { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, -+ { 104, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed1a3 }, -+ { 108, 0x18402ecc, 0x184c0a32, 0x18578a55, 0x180ed193 }, ++ { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 }, ++ { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 }, + { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, + { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, + { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, @@ -2564,7 +2854,8 @@ Signed-off-by: Ivo van Doorn + + if (rt2x00_rf(&rt2x00dev->chip, RF2820) || + rt2x00_rf(&rt2x00dev->chip, RF2720) || -+ rt2x00_rf(&rt2x00dev->chip, RF3052)) { ++ rt2x00_rf(&rt2x00dev->chip, RF3021) || ++ rt2x00_rf(&rt2x00dev->chip, RF3022)) { + spec->num_channels = 14; + spec->channels = rf_vals; + } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) || @@ -2660,7 +2951,9 @@ Signed-off-by: Ivo van Doorn + /* + * This device requires firmware. + */ -+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); ++ if (!rt2x00_rt(&rt2x00dev->chip, RT2880) && ++ !rt2x00_rt(&rt2x00dev->chip, RT3052)) ++ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); + if (!modparam_nohwcrypt) + __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); + @@ -2898,7 +3191,6 @@ Signed-off-by: Ivo van Doorn +/* + * RT2800pci module information. + */ -+#ifdef CONFIG_RT2800PCI_PCI +static struct pci_device_id rt2800pci_device_table[] = { + { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) }, @@ -2910,126 +3202,34 @@ Signed-off-by: Ivo van Doorn + { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { 0, } +}; -+MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); -+#endif /* CONFIG_RT2800PCI_PCI */ + +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver."); +MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards"); ++#ifdef CONFIG_RT2800PCI_PCI +MODULE_FIRMWARE(FIRMWARE_RT2860); ++MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); ++#endif /* CONFIG_RT2800PCI_PCI */ +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_RT2800PCI_WISOC -+ -+#ifdef CONFIG_RALINK_RT288X -+#define WSOC_RT_CHIPSET RT2880 -+#endif /* CONFIG_RALINK_RT288X */ -+ -+#ifdef CONFIG_RALINK_RT305X -+#define WSOC_RT_CHIPSET RT3052 -+#endif /* CONFIG_RALINK_RT305X */ -+ -+static void rt2800soc_free_reg(struct rt2x00_dev *rt2x00dev) -+{ -+ kfree(rt2x00dev->rf); -+ rt2x00dev->rf = NULL; -+ -+ kfree(rt2x00dev->eeprom); -+ rt2x00dev->eeprom = NULL; -+} -+ -+static int rt2800soc_alloc_reg(struct rt2x00_dev *rt2x00dev) -+{ -+ struct platform_device *pdev = to_platform_device(rt2x00dev->dev); -+ struct resource *res; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ ERROR_PROBE("Failed to get MMIO resource\n"); -+ return -ENODEV; -+ } -+ -+ rt2x00dev->csr.base = (void __iomem *) KSEG1ADDR(res->start); -+ rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); -+ if (!rt2x00dev->eeprom) -+ goto exit; -+ -+ rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); -+ if (!rt2x00dev->rf) -+ goto exit; -+ -+ return 0; -+ -+exit: -+ ERROR_PROBE("Failed to allocate registers.\n"); -+ rt2800soc_free_reg(rt2x00dev); -+ -+ return -ENOMEM; -+} -+ -+static int rt2800soc_probe(struct platform_device *pdev) -+{ -+ const struct rt2x00_ops *ops = &rt2800pci_ops; -+ struct ieee80211_hw *hw; -+ struct rt2x00_dev *rt2x00dev; -+ int retval; -+ -+ hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); -+ if (!hw) { -+ ERROR_PROBE("Failed to allocate hardware.\n"); -+ return -ENOMEM; -+ } -+ -+ platform_set_drvdata(pdev, hw); -+ -+ rt2x00dev = hw->priv; -+ rt2x00dev->dev = &pdev->dev; -+ rt2x00dev->ops = ops; -+ rt2x00dev->hw = hw; -+ rt2x00dev->irq = platform_get_irq(pdev, 0); -+ rt2x00dev->name = pdev->dev.driver->name; -+ -+ rt2x00_set_chip_rt(rt2x00dev, WSOC_RT_CHIPSET); -+ -+ retval = rt2800soc_alloc_reg(rt2x00dev); -+ if (retval) -+ goto exit_free_device; -+ -+ retval = rt2x00lib_probe_dev(rt2x00dev); -+ if (retval) -+ goto exit_free_reg; -+ -+ return 0; -+ -+exit_free_reg: -+ rt2800soc_free_reg(rt2x00dev); -+ -+exit_free_device: -+ ieee80211_free_hw(hw); -+ -+ return retval; -+} -+ -+static int rt2800soc_remove(struct platform_device *pdev) -+{ -+ struct ieee80211_hw *hw = platform_get_drvdata(pdev); -+ struct rt2x00_dev *rt2x00dev = hw->priv; -+ -+ /* -+ * Free all allocated data. -+ */ -+ rt2x00lib_remove_dev(rt2x00dev); -+ rt2800soc_free_reg(rt2x00dev); -+ ieee80211_free_hw(hw); -+ -+ return 0; -+} ++#if defined(CONFIG_RALINK_RT288X) ++__rt2x00soc_probe(RT2880, &rt2800pci_ops); ++#elif defined(CONFIG_RALINK_RT305X) ++__rt2x00soc_probe(RT3052, &rt2800pci_ops); ++#endif + +static struct platform_driver rt2800soc_driver = { -+ .driver.name = "rt2800_wmac", -+ .probe = rt2800soc_probe, -+ .remove = rt2800soc_remove, ++ .driver = { ++ .name = "rt2800_wmac", ++ .owner = THIS_MODULE, ++ .mod_name = KBUILD_MODNAME, ++ }, ++ .probe = __rt2x00soc_probe, ++ .remove = __devexit_p(rt2x00soc_remove), ++ .suspend = rt2x00soc_suspend, ++ .resume = rt2x00soc_resume, +}; +#endif /* CONFIG_RT2800PCI_WISOC */ + @@ -3050,10 +3250,19 @@ Signed-off-by: Ivo van Doorn + +#ifdef CONFIG_RT2800PCI_WISOC + ret = platform_driver_register(&rt2800soc_driver); ++ if (ret) ++ return ret; +#endif +#ifdef CONFIG_RT2800PCI_PCI + ret = pci_register_driver(&rt2800pci_driver); ++ if (ret) { ++#ifdef CONFIG_RT2800PCI_WISOC ++ platform_driver_unregister(&rt2800soc_driver); +#endif ++ return ret; ++ } ++#endif ++ + return ret; +} + @@ -3071,7 +3280,7 @@ Signed-off-by: Ivo van Doorn +module_exit(rt2800pci_exit); --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800pci.h -@@ -0,0 +1,1880 @@ +@@ -0,0 +1,1927 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + @@ -3110,7 +3319,8 @@ Signed-off-by: Ivo van Doorn + * RF2750 2.4G/5G 1T2R + * RF3020 2.4G 1T1R + * RF2020 2.4G B/G -+ * RF3052 2.4G 2T2R ++ * RF3021 2.4G 1T2R ++ * RF3022 2.4G 2T2R + */ +#define RF2820 0x0001 +#define RF2850 0x0002 @@ -3118,7 +3328,8 @@ Signed-off-by: Ivo van Doorn +#define RF2750 0x0004 +#define RF3020 0x0005 +#define RF2020 0x0006 -+#define RF3052 0x0008 ++#define RF3021 0x0007 ++#define RF3022 0x0008 + +/* + * RT2860 version @@ -3157,12 +3368,6 @@ Signed-off-by: Ivo van Doorn + */ + +/* -+ * PCI Configuration Header -+ */ -+#define PCI_CONFIG_HEADER_VENDOR 0x0000 -+#define PCI_CONFIG_HEADER_DEVICE 0x0002 -+ -+/* + * E2PROM_CSR: EEPROM control register. + * RELOAD: Write 1 to reload eeprom content. + * TYPE: 0: 93c46, 1:93c66. @@ -3453,6 +3658,15 @@ Signed-off-by: Ivo van Doorn +#define PBF_DBG 0x043c + +/* ++ * RF registers ++ */ ++#define RF_CSR_CFG 0x0500 ++#define RF_CSR_CFG_DATA FIELD32(0x000000ff) ++#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) ++#define RF_CSR_CFG_WRITE FIELD32(0x00010000) ++#define RF_CSR_CFG_BUSY FIELD32(0x00020000) ++ ++/* + * MAC Control/Status Registers(CSR). + * Some values are set in TU, whereas 1 TU == 1024 us. + */ @@ -4545,6 +4759,48 @@ Signed-off-by: Ivo van Doorn + * BBP 3: RX Antenna + */ +#define BBP3_RX_ANTENNA FIELD8(0x18) ++#define BBP3_HT40_PLUS FIELD8(0x20) ++ ++/* ++ * BBP 4: Bandwidth ++ */ ++#define BBP4_TX_BF FIELD8(0x01) ++#define BBP4_BANDWIDTH FIELD8(0x18) ++ ++/* ++ * RFCSR registers ++ * The wordsize of the RFCSR is 8 bits. ++ */ ++ ++/* ++ * RFCSR 6: ++ */ ++#define RFCSR6_R FIELD8(0x03) ++ ++/* ++ * RFCSR 7: ++ */ ++#define RFCSR7_RF_TUNING FIELD8(0x01) ++ ++/* ++ * RFCSR 12: ++ */ ++#define RFCSR12_TX_POWER FIELD8(0x1f) ++ ++/* ++ * RFCSR 22: ++ */ ++#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) ++ ++/* ++ * RFCSR 23: ++ */ ++#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) ++ ++/* ++ * RFCSR 30: ++ */ ++#define RFCSR30_RF_CALIBRATION FIELD8(0x80) + +/* + * RF registers diff --git a/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch b/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch deleted file mode 100644 index 3bb5c2e0fb..0000000000 --- a/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch +++ /dev/null @@ -1,535 +0,0 @@ -From bfa282e0f525b074ec9a21372ab906156ce0aa20 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn -Date: Mon, 16 Mar 2009 20:16:59 +0100 -Subject: [PATCH] rt2x00: DMA fixes & new chipset support (rt2800pci) - -Signed-off-by: Felix Fietkau -Signed-off-by: Ivo van Doorn ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 320 +++++++++++++++++++++++++++++-- - drivers/net/wireless/rt2x00/rt2800pci.h | 57 ++++++- - 2 files changed, 361 insertions(+), 16 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -66,6 +66,8 @@ MODULE_PARM_DESC(nohwcrypt, "Disable har - */ - #define WAIT_FOR_BBP(__dev, __reg) \ - rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) -+#define WAIT_FOR_RFCSR(__dev, __reg) \ -+ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) - #define WAIT_FOR_RF(__dev, __reg) \ - rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) - #define WAIT_FOR_MCU(__dev, __reg) \ -@@ -129,6 +131,61 @@ static void rt2800pci_bbp_read(struct rt - mutex_unlock(&rt2x00dev->csr_mutex); - } - -+static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev, -+ const unsigned int word, const u8 value) -+{ -+ u32 reg; -+ -+ mutex_lock(&rt2x00dev->csr_mutex); -+ -+ /* -+ * Wait until the RFCSR becomes available, afterwards we -+ * can safely write the new data into the register. -+ */ -+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { -+ reg = 0; -+ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); -+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); -+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); -+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); -+ -+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg); -+ } -+ -+ mutex_unlock(&rt2x00dev->csr_mutex); -+} -+ -+static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev, -+ const unsigned int word, u8 *value) -+{ -+ u32 reg; -+ -+ mutex_lock(&rt2x00dev->csr_mutex); -+ -+ /* -+ * Wait until the RFCSR becomes available, afterwards we -+ * can safely write the read request into the register. -+ * After the data has been written, we wait until hardware -+ * returns the correct value, if at any time the register -+ * doesn't become available in time, reg will be 0xffffffff -+ * which means we return 0xff to the caller. -+ */ -+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { -+ reg = 0; -+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); -+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); -+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); -+ -+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg); -+ -+ WAIT_FOR_RFCSR(rt2x00dev, ®); -+ } -+ -+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); -+ -+ mutex_unlock(&rt2x00dev->csr_mutex); -+} -+ - static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) - { -@@ -160,6 +217,13 @@ static void rt2800pci_mcu_request(struct - { - u32 reg; - -+ /* -+ * RT2880 and RT3052 don't support MCU requests. -+ */ -+ if (rt2x00_rt(&rt2x00dev->chip, RT2880) || -+ rt2x00_rt(&rt2x00dev->chip, RT3052)) -+ return; -+ - mutex_lock(&rt2x00dev->csr_mutex); - - /* -@@ -729,13 +793,11 @@ static void rt2800pci_config_lna_gain(st - rt2x00dev->lna_gain = lna_gain; - } - --static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev, -- struct ieee80211_conf *conf, -- struct rf_channel *rf, -- struct channel_info *info) -+static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, -+ struct ieee80211_conf *conf, -+ struct rf_channel *rf, -+ struct channel_info *info) - { -- u32 reg; -- unsigned int tx_pin; - u16 eeprom; - - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); -@@ -745,9 +807,8 @@ static void rt2800pci_config_channel(str - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - -- if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) { -+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); -- } - - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) { - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); -@@ -806,6 +867,62 @@ static void rt2800pci_config_channel(str - rt2800pci_rf_write(rt2x00dev, 2, rf->rf2); - rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800pci_rf_write(rt2x00dev, 4, rf->rf4); -+} -+ -+static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, -+ struct ieee80211_conf *conf, -+ struct rf_channel *rf, -+ struct channel_info *info) -+{ -+ u8 rfcsr; -+ -+ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1); -+ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3); -+ -+ rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); -+ rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr); -+ -+ rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, -+ TXPOWER_G_TO_DEV(info->tx_power1)); -+ rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr); -+ -+ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); -+ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr); -+ -+ if (conf_is_ht40(conf)) -+ rt2800pci_rfcsr_write(rt2x00dev, 24, -+ rt2x00dev->calibration_bw40); -+ else -+ rt2800pci_rfcsr_write(rt2x00dev, 24, -+ rt2x00dev->calibration_bw20); -+ -+ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); -+ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr); -+} -+ -+static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev, -+ struct ieee80211_conf *conf, -+ struct rf_channel *rf, -+ struct channel_info *info) -+{ -+ u32 reg; -+ unsigned int tx_pin; -+ u16 eeprom; -+ u8 bbp; -+ -+ /* -+ * Determine antenna settings from EEPROM -+ */ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); -+ -+ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) -+ rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info); -+ else -+ rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info); - - /* - * Change BBP settings -@@ -861,6 +978,26 @@ static void rt2800pci_config_channel(str - - rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - -+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp); -+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); -+ rt2800pci_bbp_write(rt2x00dev, 4, bbp); -+ -+ rt2800pci_bbp_read(rt2x00dev, 3, &bbp); -+ rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); -+ rt2800pci_bbp_write(rt2x00dev, 3, bbp); -+ -+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { -+ if (conf_is_ht40(conf)) { -+ rt2800pci_bbp_write(rt2x00dev, 69, 0x1a); -+ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a); -+ rt2800pci_bbp_write(rt2x00dev, 73, 0x16); -+ } else { -+ rt2800pci_bbp_write(rt2x00dev, 69, 0x16); -+ rt2800pci_bbp_write(rt2x00dev, 70, 0x08); -+ rt2800pci_bbp_write(rt2x00dev, 73, 0x11); -+ } -+ } -+ - msleep(1); - } - -@@ -1265,7 +1402,7 @@ static int rt2800pci_init_queues(struct - entry_priv = rt2x00dev->rx->entries[0].priv_data; - rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma); - rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit); -- rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, 0); -+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1); - rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0); - - /* -@@ -1613,7 +1750,7 @@ static int rt2800pci_init_bbp(struct rt2 - rt2800pci_bbp_write(rt2x00dev, 91, 0x04); - rt2800pci_bbp_write(rt2x00dev, 92, 0x00); - rt2800pci_bbp_write(rt2x00dev, 103, 0x00); -- rt2800pci_bbp_write(rt2x00dev, 105, 0x05); -+ rt2800pci_bbp_write(rt2x00dev, 105, 0x01); - - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { - rt2800pci_bbp_write(rt2x00dev, 69, 0x16); -@@ -1623,6 +1760,12 @@ static int rt2800pci_init_bbp(struct rt2 - if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) - rt2800pci_bbp_write(rt2x00dev, 84, 0x19); - -+ if (rt2x00_rt(&rt2x00dev->chip, RT3052)) { -+ rt2800pci_bbp_write(rt2x00dev, 31, 0x08); -+ rt2800pci_bbp_write(rt2x00dev, 78, 0x0e); -+ rt2800pci_bbp_write(rt2x00dev, 80, 0x08); -+ } -+ - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - -@@ -1636,6 +1779,144 @@ static int rt2800pci_init_bbp(struct rt2 - return 0; - } - -+static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev, -+ bool bw40, u8 rfcsr24, u8 filter_target) -+{ -+ unsigned int i; -+ u8 bbp; -+ u8 rfcsr; -+ u8 passband; -+ u8 stopband; -+ u8 overtuned = 0; -+ -+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); -+ -+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp); -+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); -+ rt2800pci_bbp_write(rt2x00dev, 4, bbp); -+ -+ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); -+ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr); -+ -+ /* -+ * Set power & frequency of passband test tone -+ */ -+ rt2800pci_bbp_write(rt2x00dev, 24, 0); -+ -+ for (i = 0; i < 100; i++) { -+ rt2800pci_bbp_write(rt2x00dev, 25, 0x90); -+ msleep(1); -+ -+ rt2800pci_bbp_read(rt2x00dev, 55, &passband); -+ if (passband) -+ break; -+ } -+ -+ /* -+ * Set power & frequency of stopband test tone -+ */ -+ rt2800pci_bbp_write(rt2x00dev, 24, 0x06); -+ -+ for (i = 0; i < 100; i++) { -+ rt2800pci_bbp_write(rt2x00dev, 25, 0x90); -+ msleep(1); -+ -+ rt2800pci_bbp_read(rt2x00dev, 55, &stopband); -+ -+ if ((passband - stopband) <= filter_target) { -+ rfcsr24++; -+ overtuned += ((passband - stopband) == filter_target); -+ } else -+ break; -+ -+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); -+ } -+ -+ rfcsr24 -= !!overtuned; -+ -+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); -+ return rfcsr24; -+} -+ -+static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev) -+{ -+ u8 rfcsr; -+ u8 bbp; -+ -+ if (!rt2x00_rf(&rt2x00dev->chip, RF3020) && -+ !rt2x00_rf(&rt2x00dev->chip, RF3021) && -+ !rt2x00_rf(&rt2x00dev->chip, RF3022)) -+ return 0; -+ -+ /* -+ * Init RF calibration. -+ */ -+ rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); -+ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr); -+ msleep(1); -+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); -+ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr); -+ -+ rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50); -+ rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01); -+ rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7); -+ rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75); -+ rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40); -+ rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03); -+ rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02); -+ rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50); -+ rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39); -+ rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f); -+ rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60); -+ rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21); -+ rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75); -+ rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75); -+ rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90); -+ rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58); -+ rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3); -+ rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92); -+ rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c); -+ rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02); -+ rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba); -+ rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb); -+ rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00); -+ rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31); -+ rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08); -+ rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01); -+ rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25); -+ rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23); -+ rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13); -+ rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83); -+ -+ /* -+ * Set RX Filter calibration for 20MHz and 40MHz -+ */ -+ rt2x00dev->calibration_bw20 = -+ rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16); -+ rt2x00dev->calibration_bw40 = -+ rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19); -+ -+ /* -+ * Set back to initial state -+ */ -+ rt2800pci_bbp_write(rt2x00dev, 24, 0); -+ -+ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); -+ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr); -+ -+ /* -+ * set BBP back to BW20 -+ */ -+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp); -+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); -+ rt2800pci_bbp_write(rt2x00dev, 4, bbp); -+ -+ return 0; -+} -+ - /* - * Device state switch handlers. - */ -@@ -1718,7 +1999,8 @@ static int rt2800pci_enable_radio(struct - rt2800pci_init_queues(rt2x00dev) || - rt2800pci_init_registers(rt2x00dev) || - rt2800pci_wait_wpdma_ready(rt2x00dev) || -- rt2800pci_init_bbp(rt2x00dev))) -+ rt2800pci_init_bbp(rt2x00dev) || -+ rt2800pci_init_rfcsr(rt2x00dev))) - return -EIO; - - /* -@@ -2114,6 +2396,12 @@ static void rt2800pci_fill_rxdone(struct - rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); - - /* -+ * Set RX IDX in register to inform hardware that we have handled -+ * this entry and it is available for reuse again. -+ */ -+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx); -+ -+ /* - * Remove TXWI descriptor from start of buffer. - */ - skb_pull(entry->skb, RXWI_DESC_SIZE); -@@ -2380,7 +2668,8 @@ static int rt2800pci_init_eeprom(struct - !rt2x00_rf(&rt2x00dev->chip, RF2750) && - !rt2x00_rf(&rt2x00dev->chip, RF3020) && - !rt2x00_rf(&rt2x00dev->chip, RF2020) && -- !rt2x00_rf(&rt2x00dev->chip, RF3052)) { -+ !rt2x00_rf(&rt2x00dev->chip, RF3021) && -+ !rt2x00_rf(&rt2x00dev->chip, RF3022)) { - ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); - return -ENODEV; - } -@@ -2528,7 +2817,8 @@ static int rt2800pci_probe_hw_mode(struc - - if (rt2x00_rf(&rt2x00dev->chip, RF2820) || - rt2x00_rf(&rt2x00dev->chip, RF2720) || -- rt2x00_rf(&rt2x00dev->chip, RF3052)) { -+ rt2x00_rf(&rt2x00dev->chip, RF3021) || -+ rt2x00_rf(&rt2x00dev->chip, RF3022)) { - spec->num_channels = 14; - spec->channels = rf_vals; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) || -@@ -2624,7 +2914,9 @@ static int rt2800pci_probe_hw(struct rt2 - /* - * This device requires firmware. - */ -- __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); -+ if (!rt2x00_rt(&rt2x00dev->chip, RT2880) && -+ !rt2x00_rt(&rt2x00dev->chip, RT3052)) -+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); - if (!modparam_nohwcrypt) - __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); - ---- a/drivers/net/wireless/rt2x00/rt2800pci.h -+++ b/drivers/net/wireless/rt2x00/rt2800pci.h -@@ -36,7 +36,8 @@ - * RF2750 2.4G/5G 1T2R - * RF3020 2.4G 1T1R - * RF2020 2.4G B/G -- * RF3052 2.4G 2T2R -+ * RF3021 2.4G 1T2R -+ * RF3022 2.4G 2T2R - */ - #define RF2820 0x0001 - #define RF2850 0x0002 -@@ -44,7 +45,8 @@ - #define RF2750 0x0004 - #define RF3020 0x0005 - #define RF2020 0x0006 --#define RF3052 0x0008 -+#define RF3021 0x0007 -+#define RF3022 0x0008 - - /* - * RT2860 version -@@ -373,6 +375,15 @@ - #define PBF_DBG 0x043c - - /* -+ * RF registers -+ */ -+#define RF_CSR_CFG 0x0500 -+#define RF_CSR_CFG_DATA FIELD32(0x000000ff) -+#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) -+#define RF_CSR_CFG_WRITE FIELD32(0x00010000) -+#define RF_CSR_CFG_BUSY FIELD32(0x00020000) -+ -+/* - * MAC Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ -@@ -1465,6 +1476,48 @@ struct mac_iveiv_entry { - * BBP 3: RX Antenna - */ - #define BBP3_RX_ANTENNA FIELD8(0x18) -+#define BBP3_HT40_PLUS FIELD8(0x20) -+ -+/* -+ * BBP 4: Bandwidth -+ */ -+#define BBP4_TX_BF FIELD8(0x01) -+#define BBP4_BANDWIDTH FIELD8(0x18) -+ -+/* -+ * RFCSR registers -+ * The wordsize of the RFCSR is 8 bits. -+ */ -+ -+/* -+ * RFCSR 6: -+ */ -+#define RFCSR6_R FIELD8(0x03) -+ -+/* -+ * RFCSR 7: -+ */ -+#define RFCSR7_RF_TUNING FIELD8(0x01) -+ -+/* -+ * RFCSR 12: -+ */ -+#define RFCSR12_TX_POWER FIELD8(0x1f) -+ -+/* -+ * RFCSR 22: -+ */ -+#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) -+ -+/* -+ * RFCSR 23: -+ */ -+#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) -+ -+/* -+ * RFCSR 30: -+ */ -+#define RFCSR30_RF_CALIBRATION FIELD8(0x80) - - /* - * RF registers diff --git a/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch b/package/mac80211/patches/308-rt2x00-Implement-support-for-rt2800usb.patch similarity index 99% rename from package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch rename to package/mac80211/patches/308-rt2x00-Implement-support-for-rt2800usb.patch index c9152fd366..946dfa1e0b 100644 --- a/package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch +++ b/package/mac80211/patches/308-rt2x00-Implement-support-for-rt2800usb.patch @@ -1,7 +1,7 @@ -From 101b65d221593c1bdeacf0c6085d885ea5447c4c Mon Sep 17 00:00:00 2001 +From 3924d0442771e17c26ab10ad53a1807e800ab3f1 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn -Date: Sat, 14 Mar 2009 20:46:40 +0100 -Subject: [PATCH] rt2x00: Implement support for rt2800usb +Date: Sat, 28 Mar 2009 20:48:56 +0100 +Subject: [PATCH 9/9] rt2x00: Implement support for rt2800usb Add support for the rt2800usb chipset. @@ -15,23 +15,23 @@ Signed-off-by: Ivo van Doorn --- drivers/net/wireless/rt2x00/Kconfig | 14 + drivers/net/wireless/rt2x00/Makefile | 1 + - drivers/net/wireless/rt2x00/rt2800usb.c | 3032 +++++++++++++++++++++++++++++++ + drivers/net/wireless/rt2x00/rt2800usb.c | 3036 +++++++++++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2800usb.h | 1934 ++++++++++++++++++++ - drivers/net/wireless/rt2x00/rt2x00.h | 7 + - 5 files changed, 4988 insertions(+), 0 deletions(-) + drivers/net/wireless/rt2x00/rt2x00.h | 1 + + 5 files changed, 4986 insertions(+), 0 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.c create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.h --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile -@@ -19,3 +19,4 @@ obj-$(CONFIG_RT61PCI) += rt61pci.o +@@ -20,3 +20,4 @@ obj-$(CONFIG_RT61PCI) += rt61pci.o obj-$(CONFIG_RT2800PCI) += rt2800pci.o obj-$(CONFIG_RT2500USB) += rt2500usb.o obj-$(CONFIG_RT73USB) += rt73usb.o +obj-$(CONFIG_RT2800USB) += rt2800usb.o --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800usb.c -@@ -0,0 +1,3032 @@ +@@ -0,0 +1,3036 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + @@ -2472,8 +2472,8 @@ Signed-off-by: Ivo van Doorn + /* 802.11 HyperLan 2 */ + { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, + { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, -+ { 104, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed1a3 }, -+ { 108, 0x18402ecc, 0x184c0a32, 0x18578a55, 0x180ed193 }, ++ { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 }, ++ { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 }, + { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, + { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, + { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, @@ -2495,6 +2495,10 @@ Signed-off-by: Ivo van Doorn + { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, + { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, + { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, ++ { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f }, ++ { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 }, ++ { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 }, ++ { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f }, + + /* 802.11 Japan */ + { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, @@ -5011,16 +5015,3 @@ Signed-off-by: Ivo van Doorn u16 rf; u32 rev; -@@ -788,6 +789,12 @@ struct rt2x00_dev { - u8 freq_offset; - - /* -+ * Calibration information (for rt2800usb). -+ */ -+ u8 calibration_bw20; -+ u8 calibration_bw40; -+ -+ /* - * Low level statistics which will have - * to be kept up to date while device is running. - */ diff --git a/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch b/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch deleted file mode 100644 index 25c07791f0..0000000000 --- a/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch +++ /dev/null @@ -1,136 +0,0 @@ -From e6cbd7e05f7c1fe0a737526d20f39b4a52e03ae8 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn -Date: Tue, 17 Mar 2009 14:01:29 +0100 -Subject: [PATCH] rt2x00: Fix compile errors for SoC - -Signed-off-by: Ivo van Doorn ---- - drivers/net/wireless/rt2x00/rt2800pci.c | 37 +++++++++++++++---------------- - 1 files changed, 18 insertions(+), 19 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -3186,7 +3186,7 @@ MODULE_LICENSE("GPL"); - #define WSOC_RT_CHIPSET RT3052 - #endif /* CONFIG_RALINK_RT305X */ - --static void rt2800soc_free_reg(struct rt2x00_dev *rt2x00dev) -+static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev) - { - kfree(rt2x00dev->rf); - rt2x00dev->rf = NULL; -@@ -3195,7 +3195,7 @@ static void rt2800soc_free_reg(struct rt - rt2x00dev->eeprom = NULL; - } - --static int rt2800soc_alloc_reg(struct rt2x00_dev *rt2x00dev) -+static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev) - { - struct platform_device *pdev = to_platform_device(rt2x00dev->dev); - struct resource *res; -@@ -3219,14 +3219,14 @@ static int rt2800soc_alloc_reg(struct rt - - exit: - ERROR_PROBE("Failed to allocate registers.\n"); -- rt2800soc_free_reg(rt2x00dev); -+ rt2x00soc_free_reg(rt2x00dev); - - return -ENOMEM; - } - --static int rt2800soc_probe(struct platform_device *pdev) -+static int rt2x00soc_probe(struct platform_device *pdev) - { -- struct rt2x00_ops *ops = (struct rt2x00_ops *)pdev->driver->p; -+ const struct rt2x00_ops *ops = &rt2800pci_ops; - struct ieee80211_hw *hw; - struct rt2x00_dev *rt2x00dev; - int retval; -@@ -3248,7 +3248,7 @@ static int rt2800soc_probe(struct platfo - - rt2x00_set_chip_rt(rt2x00dev, WSOC_RT_CHIPSET); - -- retval = rt2800soc_alloc_reg(rt2x00dev); -+ retval = rt2x00soc_alloc_reg(rt2x00dev); - if (retval) - goto exit_free_device; - -@@ -3259,7 +3259,7 @@ static int rt2800soc_probe(struct platfo - return 0; - - exit_free_reg: -- rt2800soc_free_reg(rt2x00dev); -+ rt2x00soc_free_reg(rt2x00dev); - - exit_free_device: - ieee80211_free_hw(hw); -@@ -3267,7 +3267,7 @@ exit_free_device: - return retval; - } - --static int rt2800soc_remove(struct platform_device *pdev) -+static int rt2x00soc_remove(struct platform_device *pdev) - { - struct ieee80211_hw *hw = platform_get_drvdata(pdev); - struct rt2x00_dev *rt2x00dev = hw->priv; -@@ -3276,16 +3276,16 @@ static int rt2800soc_remove(struct platf - * Free all allocated data. - */ - rt2x00lib_remove_dev(rt2x00dev); -- rt2800soc_free_reg(rt2x00dev); -+ rt2x00soc_free_reg(rt2x00dev); - ieee80211_free_hw(hw); - - return 0; - } - - #ifdef CONFIG_PM --int rt2x00soc_suspend(struct device *dev, pm_message_t state) -+int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state) - { -- struct ieee80211_hw *hw = dev_get_drvdata(dev); -+ struct ieee80211_hw *hw = platform_get_drvdata(pdev); - struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; - -@@ -3293,14 +3293,14 @@ int rt2x00soc_suspend(struct device *dev - if (retval) - return retval; - -- rt2800soc_free_reg(rt2x00dev); -+ rt2x00soc_free_reg(rt2x00dev); - - return 0; - } - --int rt2x00soc_resume(struct device *dev) -+int rt2x00soc_resume(struct platform_device *pdev) - { -- struct ieee80211_hw *hw = dev_get_drvdata(dev); -+ struct ieee80211_hw *hw = platform_get_drvdata(pdev); - struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; - -@@ -3315,7 +3315,7 @@ int rt2x00soc_resume(struct device *dev) - return 0; - - exit_free_reg: -- rt2x00pci_free_reg(rt2x00dev); -+ rt2x00soc_free_reg(rt2x00dev); - - return retval; - } -@@ -3326,10 +3326,9 @@ static struct platform_driver rt2800soc_ - .name = "rt2800_wmac", - .owner = THIS_MODULE, - .mod_name = KBUILD_MODNAME, -- .p = &rt2800pci_ops; -- } -- .probe = rt2800soc_probe, -- .remove = __devexit_p(rt2800soc_remove), -+ }, -+ .probe = rt2x00soc_probe, -+ .remove = __devexit_p(rt2x00soc_remove), - .suspend = rt2x00soc_suspend, - .resume = rt2x00soc_resume, - }; diff --git a/package/mac80211/patches/520-b43-autodepend-on-hwrandom.patch b/package/mac80211/patches/520-b43-autodepend-on-hwrandom.patch index c79f6573f5..9ffdadfd26 100644 --- a/package/mac80211/patches/520-b43-autodepend-on-hwrandom.patch +++ b/package/mac80211/patches/520-b43-autodepend-on-hwrandom.patch @@ -4,10 +4,8 @@ This patch is submitted upstream and can be removed when it hits compat-wireless -Index: compat-wireless-2009-03-24/drivers/net/wireless/b43/b43.h -=================================================================== ---- compat-wireless-2009-03-24.orig/drivers/net/wireless/b43/b43.h 2009-03-29 13:27:05.000000000 +0200 -+++ compat-wireless-2009-03-24/drivers/net/wireless/b43/b43.h 2009-03-29 13:27:21.000000000 +0200 +--- a/drivers/net/wireless/b43/b43.h ++++ b/drivers/net/wireless/b43/b43.h @@ -624,9 +624,11 @@ struct b43_wl { /* Stats about the wireless interface */ struct ieee80211_low_level_stats ieee_stats; @@ -21,10 +19,8 @@ Index: compat-wireless-2009-03-24/drivers/net/wireless/b43/b43.h /* The RF-kill button */ struct b43_rfkill rfkill; -Index: compat-wireless-2009-03-24/drivers/net/wireless/b43/main.c -=================================================================== ---- compat-wireless-2009-03-24.orig/drivers/net/wireless/b43/main.c 2009-03-29 13:27:05.000000000 +0200 -+++ compat-wireless-2009-03-24/drivers/net/wireless/b43/main.c 2009-03-29 13:27:21.000000000 +0200 +--- a/drivers/net/wireless/b43/main.c ++++ b/drivers/net/wireless/b43/main.c @@ -2982,6 +2982,7 @@ static void b43_security_init(struct b43 b43_clear_keys(dev); } @@ -64,10 +60,8 @@ Index: compat-wireless-2009-03-24/drivers/net/wireless/b43/main.c return err; } -Index: compat-wireless-2009-03-24/config.mk -=================================================================== ---- compat-wireless-2009-03-24.orig/config.mk 2009-03-29 13:28:03.000000000 +0200 -+++ compat-wireless-2009-03-24/config.mk 2009-03-29 13:28:32.000000000 +0200 +--- a/config.mk ++++ b/config.mk @@ -148,6 +148,7 @@ CONFIG_ATH9K_DEBUG=y # CONFIG_B43_PIO=y # CONFIG_B43_LEDS=y