KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

lantiq: use ath9k device tree bindings binding/owl-loader

Browse source 
This moves the extraction of the eeprom/calibration data to a hotplug
firmware script. Additionally it modifies all .dts to configure ath9k
directly from within the .dts.

The owl-loader approach enables support on devices with exotic eeprom
data locations (such as unaligned positions on the flash or data
inside an UBI volume).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[add ath9k caldata mac address patcher]
[fixes DGN3500 wifi mac]
[fixes BTHOMEHUBV3A wifi mac]
[set invalid mac for BTHOMEHUB2B, FRITZ3370, FRITZ7320 & FRITZ7360SL to restore previous random mac behavior]
Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Martin Blumenstingl 2016-11-26 01:01:15 +01:00 committed by Mathias Kresin
parent 448b9b67e1
commit a20616863d
14 changed files with 305 additions and 141 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

140
target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom Normal file
View file

@ -0,0 +1,140 @@
#!/bin/sh
# Based on ar71xx 10-ath9k-eeprom
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/functions.sh
. /lib/functions/system.sh
. /lib/functions/lantiq.sh
. /lib/upgrade/nand.sh
# xor multiple hex values of the same length
xor() {
local val
local ret="0x$1"
local retlen=${#1}
shift
while [ -n "$1" ]; do
val="0x$1"
ret=$((ret ^ val))
shift
done
printf "%0${retlen}x" "$ret"
}
ath9k_eeprom_die() {
echo "ath9k eeprom: $*"
exit 1
}
ath9k_eeprom_extract_raw() {
local source=$1
local offset=$2
local size=4096
dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$size 2>/dev/null || \
ath9k_eeprom_die "failed to extract from $mtd"
}
ath9k_eeprom_extract() {
local part=$1
local offset=$2
local mtd
mtd=$(find_mtd_chardev $part)
[ -n "$mtd" ] || \
ath9k_eeprom_die "no mtd device found for partition $part"
ath9k_eeprom_extract_raw $mtd $offset
}
ath9k_ubi_eeprom_extract() {
local part=$1
local offset=$2
local ubidev=$(nand_find_ubi $CI_UBIPART)
local ubi
ubi=$(nand_find_volume $ubidev $part)
[ -n "$ubi" ] || \
ath9k_eeprom_die "no UBI volume found for $part"
ath9k_eeprom_extract_raw /dev/$ubi $offset
}
ath9k_patch_firmware_mac() {
local mac=$1
local mac_offset=$2
local swap=$3
local chksum_offset=$4
local xor_mac
local xor_fw_mac
local xor_fw_chksum
[ -z "$mac" -o -z "$mac_offset" ] && return
[ $swap -gt 0 ] && mac="${mac:3:2}:${mac:0:2}:${mac:9:2}:${mac:6:2}:${mac:15:2}:${mac:12:2}"
[ -n "$chksum_offset" ] && {
xor_mac=${mac//:/}
xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
}
macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$mac_offset count=6
}
case "$FIRMWARE" in
"ath9k-eeprom-pci-0000:00:0e.0.bin" | \
"ath9k-eeprom-pci-0000:01:00.0.bin" | \
"ath9k-eeprom-pci-0000:02:00.0.bin")
board=$(lantiq_board_name)
case "$board" in
ARV7518PW)
ath9k_eeprom_extract "boardconfig" 1024
;;
ARV8539PW22)
ath9k_eeprom_extract "art" 1024
;;
BTHOMEHUBV2B)
ath9k_eeprom_extract "art" 0
ath9k_patch_firmware_mac "00:00:00:00:00:00" 524 1 514
;;
BTHOMEHUBV3A)
ath9k_eeprom_extract "art-copy" 0
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 268 1 258
;;
BTHOMEHUBV5A)
ath9k_eeprom_extract "caldata" 4096
;;
DGN3500*)
ath9k_eeprom_extract "calibration" 61440
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524 0 514
;;
FRITZ3370)
ath9k_eeprom_extract "urlader" 2437
ath9k_patch_firmware_mac "00:00:00:00:00:00" 2 0
;;
FRITZ7320|FRITZ7360SL)
ath9k_eeprom_extract "urlader" 2437
ath9k_patch_firmware_mac "00:00:00:00:00:00" 268 0 258
;;
TDW8970|TDW8980)
ath9k_eeprom_extract "boardconfig" 135168
;;
*)
ath9k_eeprom_die "board $board is not supported yet"
;;
esac
;;
esac

31
target/linux/lantiq/dts/ARV7518PW.dts
View file

@ -79,15 +79,6 @@
gpio-controller;
lantiq,shadow = <0x0>;
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&boardconfig 0x400>;
ath,mac-offset = <0x16>;
ath,mac-increment = <1>;
ath,pci-slot = <14>;
ath,eep-endian;
};
};
gpio: pinmux@E100B10 {
@ -139,13 +130,6 @@
status = "okay";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0xf>;
};
};
/*
@ -230,3 +214,18 @@
};
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
lantiq,external-clock;
req-mask = <0xf>;
wifi@168c,0029 {
compatible = "pci168c,0029";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
mtd-mac-address = <&boardconfig 0x16>;
mtd-mac-address-increment = <1>;
};
};

26
target/linux/lantiq/dts/ARV8539PW22.dts
View file

@ -66,15 +66,6 @@
};
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&art 0x400>;
ath,mac-offset = <0x16>;
ath,mac-increment = <1>;
ath,pci-slot = <14>;
ath,eep-endian;
};
};
gpio: pinmux@E100B10 {
@ -111,11 +102,6 @@
mtd-mac-address = <&art 0x16>;
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
@ -175,3 +161,15 @@
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@168c,0029 {
compatible = "pci168c,0029";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
mtd-mac-address = <&art 0x16>;
mtd-mac-address-increment = <1>;
};
};

23
target/linux/lantiq/dts/BTHOMEHUBV2B.dts
View file

@ -104,14 +104,6 @@
};
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0x0000>;
ath,mac-increment = <1>;
ath,pci-slot = <14>;
ath,eep-endian;
};
};
gpio: pinmux@E100B10 {
@ -177,11 +169,6 @@
gpios: stp@E100BB0 {
status = "okay";
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
@ -262,3 +249,13 @@
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@168c,0027 {
compatible = "pci168c,0027";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
};
};

22
target/linux/lantiq/dts/BTHOMEHUBV3A.dts
View file

@ -75,13 +75,6 @@
};
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0x0000>;
ath,pci-slot = <14>;
ath,eep-endian;
};
};
gpio: pinmux@E100B10 {
@ -134,11 +127,6 @@
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
@ -207,3 +195,13 @@
};
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
ath9k@7000 {
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
};
};

27
target/linux/lantiq/dts/BTHOMEHUBV5A.dts
View file

@ -111,11 +111,6 @@
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
gphy-xrx200 {
@ -125,14 +120,6 @@
phys = [ 00 01 ];
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&caldata 0x1000>;
ath,mac-offset = <0x110c>;
ath,mac-increment = <2>;
ath,pci-slot = <0xe>; /* 14 */
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@ -211,6 +198,20 @@
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@168c,002d {
compatible = "pci168c,002d";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
qca,disable-5ghz;
mtd-mac-address = <&caldata 0x110c>;
mtd-mac-address-increment = <2>;
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";

24
target/linux/lantiq/dts/DGN3500.dtsi
View file

@ -69,19 +69,6 @@
ifxhcd@E101000 {
status = "okay";
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0xf000>;
ath,pci-slot = <14>;
ath,eep-endian;
ath,eep-swap;
};
rtl8366rb {
@ -153,6 +140,17 @@
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@168c,0029 {
compatible = "pci168c,0029";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;

25
target/linux/lantiq/dts/FRITZ3370.dts
View file

@ -118,13 +118,6 @@
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0x985>;
ath,eep-endian;
ath,eep-swap;
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/vr9_phy11g_a1x.bin";
@ -196,7 +189,7 @@
reg = <4 0>;
spi-max-frequency = <1000000>;
ath9k_cal: partition@0 {
partition@0 {
reg = <0x0 0x20000>;
label = "urlader";
read-only;
@ -275,3 +268,19 @@
};
};
};
&pcie0 {
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
wifi@0,0 {
compatible = "pci0,0";
reg = <0 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
};
};
};

26
target/linux/lantiq/dts/FRITZ7320.dts
View file

@ -65,14 +65,6 @@
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0x985>;
ath,device-id = /bits/ 16 <0xff1d 0x2d>;
ath,eep-endian;
ath,eep-swap;
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@ -103,12 +95,6 @@
ifxhcd@E101000 {
status = "okay";
};
pci@E105400 {
status = "okay";
req-mask = <0xf>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
@ -158,3 +144,15 @@
};
};
};
&pci0 {
status = "okay";
req-mask = <0xf>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@0,0 {
compatible = "pci0,0";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
};
};

24
target/linux/lantiq/dts/FRITZ7360SL.dts
View file

@ -96,14 +96,6 @@
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&urlader 0x985>;
ath,eep-endian;
ath,eep-swap;
ath,pci-slot = <0>;
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/vr9_phy11g_a2x.bin";
@ -217,3 +209,19 @@
};
};
};
&pcie0 {
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
wifi@168c,002e {
compatible = "pci168c,002e";
reg = <0 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
};
};
};

4
target/linux/lantiq/dts/TDW8980.dts
View file

@ -25,10 +25,6 @@
};
};
ath9k_eep {
ath,pci-slot = <0>;
};
gpio-leds {
wifi2 {
label = "tdw8980:green:wlan5ghz";

41
target/linux/lantiq/dts/TDW89X0.dtsi
View file

@ -14,6 +14,7 @@
led-dsl = &dsl;
led-internet = &internet;
led-wifi = &wifi;
led-usb = &usb0;
led-usb2 = &usb2;
};
@ -83,16 +84,6 @@
phys = [ 00 01 ];
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0x21000>;
ath,mac-offset = <0xf100>;
ath,mac-increment = <2>;
ath,led-pin = <0>;
ath,disable-5ghz;
ath,led-active-high;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@ -144,6 +135,15 @@
gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
};
};
wifi-leds {
compatible = "gpio-leds";
wifi: wifi {
label = "tdw89x0:green:wifi";
gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>;
};
};
};
&spi {
@ -249,3 +249,24 @@
};
};
};
&pcie0 {
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ath9k: wifi@168c,002e {
compatible = "pci168c,002e";
reg = <0 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
qca,no-eeprom;
qca,disable-5ghz;
mtd-mac-address = <&ath9k_cal 0xf100>;
mtd-mac-address-increment = <2>;
};
};
};

31
target/linux/lantiq/image/Makefile
View file

@ -176,7 +176,7 @@ define Device/BTHOMEHUBV2B
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
kmod-ltq-deu-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k wpad-mini
kmod-ath9k kmod-owl-loader wpad-mini
endef
TARGET_DEVICES += BTHOMEHUBV2B
@ -258,7 +258,7 @@ define Device/ARV7518PW
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k wpad-mini
kmod-ath9k kmod-owl-loader wpad-mini
endef
TARGET_DEVICES += ARV7518PW
@ -304,7 +304,7 @@ define Device/ARV8539PW22
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k wpad-mini
kmod-ath9k kmod-owl-loader wpad-mini
endef
TARGET_DEVICES += ARV8539PW22
@ -330,7 +330,8 @@ define Device/BTHOMEHUBV3A
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
kmod-ltq-deu-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k wpad-mini uboot-envtools
kmod-ath9k kmod-owl-loader wpad-mini \
uboot-envtools
endef
TARGET_DEVICES += BTHOMEHUBV3A
@ -357,7 +358,7 @@ define Device/DGN3500
check-size 16320k | pad-to 16384k
DEVICE_TITLE := Netgear DGN3500
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ath9k wpad-mini \
kmod-ath9k kmod-owl-loader wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
@ -377,7 +378,7 @@ define Device/DGN3500B
check-size 16320k | pad-to 16384k
DEVICE_TITLE := Netgear DGN3500B
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ath9k wpad-mini \
kmod-ath9k kmod-owl-loader wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
@ -393,7 +394,7 @@ define Device/WBMRA
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k wpad-mini
kmod-ath9k kmod-owl-loader wpad-mini
endef
TARGET_DEVICES += WBMRA
@ -405,7 +406,7 @@ define Device/WBMRB
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k wpad-mini
kmod-ath9k kmod-owl-loader wpad-mini
endef
TARGET_DEVICES += WBMRB
@ -413,12 +414,11 @@ define Device/FRITZ7320
$(Device/AVM)
IMAGE_SIZE := 15744k
DEVICE_TITLE := 1&1 HomeServer - FRITZ7320
DEVICE_PACKAGES := kmod-ath9k wpad-mini \
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-deu-ar9 kmod-usb-dwc2 \
kmod-ath9k wpad-mini -swconfig
kmod-ltq-deu-ar9 kmod-usb-dwc2 -swconfig
endef
TARGET_DEVICES += FRITZ7320
@ -477,7 +477,8 @@ TARGET_DEVICES += ARV7519RW22
define Device/BTHOMEHUBV5A
$(Device/NAND)
DEVICE_TITLE := BT Home Hub 5A
DEVICE_PACKAGES := kmod-ath9k kmod-ath10k ath10k-firmware-qca988x wpad-mini kmod-usb-dwc2
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader \
kmod-ath10k ath10k-firmware-qca988x wpad-mini kmod-usb-dwc2
endef
TARGET_DEVICES += BTHOMEHUBV5A
@ -485,14 +486,14 @@ define Device/EASY80920NAND
$(Device/lantiqFullImage)
IMAGE_SIZE := 64512k
DEVICE_TITLE := Lantiq VR9 - EASY80920NAND
DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += EASY80920NAND
define Device/EASY80920NOR
IMAGE_SIZE := 7936k
DEVICE_TITLE := Lantiq VR9 - EASY80920NOR
DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += EASY80920NOR
@ -508,7 +509,7 @@ define Device/FRITZ7360SL
$(Device/AVM)
IMAGE_SIZE := 15744k
DEVICE_TITLE := 1&1 HomeServer - FRITZ7360SL
DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2
endef
TARGET_DEVICES += FRITZ7360SL

2
target/linux/lantiq/image/tp-link.mk
View file

@ -33,7 +33,7 @@ define Device/TDW8980
BOARD_ID := TD-W8980v1
IMAGE_SIZE := 7680k
DEVICE_TITLE := TP-LINK TD-W8980
DEVICE_PACKAGES:= kmod-ath9k wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
DEVICE_PACKAGES:= kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
endef
define Device/VR200v