Port the usb host driver and install some missing headers
SVN-Revision: 16660
This commit is contained in:
parent
fefeecf52f
commit
a10e35c0a8
5 changed files with 10898 additions and 0 deletions
|
@ -21,4 +21,12 @@ define Target/Description
|
|||
Build firmware images for the FOXBOARD made by acmesystems.it
|
||||
endef
|
||||
|
||||
define Kernel/Prepare
|
||||
$(call Kernel/Prepare/Default)
|
||||
mkdir -p $(LINUX_DIR)/include/asm-cris
|
||||
$(CP) $(LINUX_DIR)/arch/cris/include/asm/*.h $(LINUX_DIR)/include/asm-cris
|
||||
mkdir -p $(LINUX_DIR)/include/asm-cris/arch
|
||||
$(CP) $(LINUX_DIR)/arch/cris/include/arch-v10/arch/*.h $(LINUX_DIR)/include/asm-cris/arch
|
||||
endef
|
||||
|
||||
$(eval $(call BuildTarget))
|
||||
|
|
282
target/linux/etrax/files-2.6.30/drivers/usb/host/hc-cris-dbg.h
Normal file
282
target/linux/etrax/files-2.6.30/drivers/usb/host/hc-cris-dbg.h
Normal file
|
@ -0,0 +1,282 @@
|
|||
|
||||
/* macros for debug output */
|
||||
|
||||
#define hcd_dbg(hcd, fmt, args...) \
|
||||
dev_info(hcd->self.controller, fmt, ## args)
|
||||
#define hcd_err(hcd, fmt, args...) \
|
||||
dev_err(hcd->self.controller, fmt, ## args)
|
||||
#define hcd_info(hcd, fmt, args...) \
|
||||
dev_info(hcd->self.controller, fmt, ## args)
|
||||
#define hcd_warn(hcd, fmt, args...) \
|
||||
dev_warn(hcd->self.controller, fmt, ## args)
|
||||
|
||||
/*
|
||||
#define devdrv_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "usb_devdrv dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define devdrv_dbg(fmt, args...) {}
|
||||
|
||||
#define devdrv_err(fmt, args...) \
|
||||
printk(KERN_ERR "usb_devdrv error: ");printk(fmt, ## args)
|
||||
#define devdrv_info(fmt, args...) \
|
||||
printk(KERN_INFO "usb_devdrv: ");printk(fmt, ## args)
|
||||
|
||||
#define irq_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_irq dbg: ");printk(fmt, ## args)
|
||||
#define irq_err(fmt, args...) \
|
||||
printk(KERN_ERR "crisv10_irq error: ");printk(fmt, ## args)
|
||||
#define irq_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_irq warn: ");printk(fmt, ## args)
|
||||
#define irq_info(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_hcd: ");printk(fmt, ## args)
|
||||
|
||||
/*
|
||||
#define rh_dbg(fmt, args...) \
|
||||
printk(KERN_DEBUG "crisv10_rh dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define rh_dbg(fmt, args...) {}
|
||||
|
||||
#define rh_err(fmt, args...) \
|
||||
printk(KERN_ERR "crisv10_rh error: ");printk(fmt, ## args)
|
||||
#define rh_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_rh warning: ");printk(fmt, ## args)
|
||||
#define rh_info(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_rh: ");printk(fmt, ## args)
|
||||
|
||||
/*
|
||||
#define tc_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_tc dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define tc_dbg(fmt, args...) {while(0){}}
|
||||
|
||||
#define tc_err(fmt, args...) \
|
||||
printk(KERN_ERR "crisv10_tc error: ");printk(fmt, ## args)
|
||||
/*
|
||||
#define tc_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_tc warning: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define tc_warn(fmt, args...) {while(0){}}
|
||||
|
||||
#define tc_info(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_tc: ");printk(fmt, ## args)
|
||||
|
||||
|
||||
/* Debug print-outs for various traffic types */
|
||||
|
||||
#define intr_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_intr warning: ");printk(fmt, ## args)
|
||||
/*
|
||||
#define intr_dbg(fmt, args...) \
|
||||
printk(KERN_DEBUG "crisv10_intr dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define intr_dbg(fmt, args...) {while(0){}}
|
||||
|
||||
|
||||
#define isoc_err(fmt, args...) \
|
||||
printk(KERN_ERR "crisv10_isoc error: ");printk(fmt, ## args)
|
||||
/*
|
||||
#define isoc_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_isoc warning: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define isoc_warn(fmt, args...) {while(0){}}
|
||||
|
||||
/*
|
||||
#define isoc_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_isoc dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define isoc_dbg(fmt, args...) {while(0){}}
|
||||
|
||||
/*
|
||||
#define timer_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_timer warning: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define timer_warn(fmt, args...) {while(0){}}
|
||||
|
||||
/*
|
||||
#define timer_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_timer dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define timer_dbg(fmt, args...) {while(0){}}
|
||||
|
||||
|
||||
/* Debug printouts for events related to late finishing of URBs */
|
||||
/*
|
||||
#define late_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_late dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define late_dbg(fmt, args...) {while(0){}}
|
||||
|
||||
#define late_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_late warning: ");printk(fmt, ## args)
|
||||
/*
|
||||
#define errno_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_errno dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define errno_dbg(fmt, args...) {while(0){}}
|
||||
|
||||
|
||||
#define dma_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_dma dbg: ");printk(fmt, ## args)
|
||||
#define dma_err(fmt, args...) \
|
||||
printk(KERN_ERR "crisv10_dma error: ");printk(fmt, ## args)
|
||||
#define dma_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_dma warning: ");printk(fmt, ## args)
|
||||
#define dma_info(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_dma: ");printk(fmt, ## args)
|
||||
|
||||
|
||||
|
||||
#define str_dir(pipe) \
|
||||
(usb_pipeout(pipe) ? "out" : "in")
|
||||
#define str_type(pipe) \
|
||||
({ \
|
||||
char *s = "?"; \
|
||||
switch (usb_pipetype(pipe)) { \
|
||||
case PIPE_ISOCHRONOUS: s = "iso"; break; \
|
||||
case PIPE_INTERRUPT: s = "intr"; break; \
|
||||
case PIPE_CONTROL: s = "ctrl"; break; \
|
||||
case PIPE_BULK: s = "bulk"; break; \
|
||||
}; \
|
||||
s; \
|
||||
})
|
||||
|
||||
/* macros for debug output */
|
||||
|
||||
#define hcd_dbg(hcd, fmt, args...) \
|
||||
dev_info(hcd->self.controller, fmt, ## args)
|
||||
#define hcd_err(hcd, fmt, args...) \
|
||||
dev_err(hcd->self.controller, fmt, ## args)
|
||||
#define hcd_info(hcd, fmt, args...) \
|
||||
dev_info(hcd->self.controller, fmt, ## args)
|
||||
#define hcd_warn(hcd, fmt, args...) \
|
||||
dev_warn(hcd->self.controller, fmt, ## args)
|
||||
|
||||
/*
|
||||
#define devdrv_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "usb_devdrv dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define devdrv_dbg(fmt, args...) {}
|
||||
|
||||
#define devdrv_err(fmt, args...) \
|
||||
printk(KERN_ERR "usb_devdrv error: ");printk(fmt, ## args)
|
||||
#define devdrv_info(fmt, args...) \
|
||||
printk(KERN_INFO "usb_devdrv: ");printk(fmt, ## args)
|
||||
|
||||
#define irq_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_irq dbg: ");printk(fmt, ## args)
|
||||
#define irq_err(fmt, args...) \
|
||||
printk(KERN_ERR "crisv10_irq error: ");printk(fmt, ## args)
|
||||
#define irq_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_irq warn: ");printk(fmt, ## args)
|
||||
#define irq_info(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_hcd: ");printk(fmt, ## args)
|
||||
|
||||
/*
|
||||
#define rh_dbg(fmt, args...) \
|
||||
printk(KERN_DEBUG "crisv10_rh dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define rh_dbg(fmt, args...) {}
|
||||
|
||||
#define rh_err(fmt, args...) \
|
||||
printk(KERN_ERR "crisv10_rh error: ");printk(fmt, ## args)
|
||||
#define rh_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_rh warning: ");printk(fmt, ## args)
|
||||
#define rh_info(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_rh: ");printk(fmt, ## args)
|
||||
|
||||
/*
|
||||
#define tc_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_tc dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define tc_dbg(fmt, args...) {while(0){}}
|
||||
|
||||
#define tc_err(fmt, args...) \
|
||||
printk(KERN_ERR "crisv10_tc error: ");printk(fmt, ## args)
|
||||
/*
|
||||
#define tc_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_tc warning: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define tc_warn(fmt, args...) {while(0){}}
|
||||
|
||||
#define tc_info(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_tc: ");printk(fmt, ## args)
|
||||
|
||||
|
||||
/* Debug print-outs for various traffic types */
|
||||
|
||||
#define intr_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_intr warning: ");printk(fmt, ## args)
|
||||
/*
|
||||
#define intr_dbg(fmt, args...) \
|
||||
printk(KERN_DEBUG "crisv10_intr dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define intr_dbg(fmt, args...) {while(0){}}
|
||||
|
||||
|
||||
#define isoc_err(fmt, args...) \
|
||||
printk(KERN_ERR "crisv10_isoc error: ");printk(fmt, ## args)
|
||||
/*
|
||||
#define isoc_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_isoc warning: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define isoc_warn(fmt, args...) {while(0){}}
|
||||
|
||||
/*
|
||||
#define isoc_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_isoc dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define isoc_dbg(fmt, args...) {while(0){}}
|
||||
|
||||
/*
|
||||
#define timer_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_timer warning: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define timer_warn(fmt, args...) {while(0){}}
|
||||
|
||||
/*
|
||||
#define timer_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_timer dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define timer_dbg(fmt, args...) {while(0){}}
|
||||
|
||||
|
||||
/* Debug printouts for events related to late finishing of URBs */
|
||||
/*
|
||||
#define late_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_late dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define late_dbg(fmt, args...) {while(0){}}
|
||||
|
||||
#define late_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_late warning: ");printk(fmt, ## args)
|
||||
/*
|
||||
#define errno_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_errno dbg: ");printk(fmt, ## args)
|
||||
*/
|
||||
#define errno_dbg(fmt, args...) {while(0){}}
|
||||
|
||||
|
||||
#define dma_dbg(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_dma dbg: ");printk(fmt, ## args)
|
||||
#define dma_err(fmt, args...) \
|
||||
printk(KERN_ERR "crisv10_dma error: ");printk(fmt, ## args)
|
||||
#define dma_warn(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_dma warning: ");printk(fmt, ## args)
|
||||
#define dma_info(fmt, args...) \
|
||||
printk(KERN_INFO "crisv10_dma: ");printk(fmt, ## args)
|
||||
|
||||
|
||||
|
||||
#define str_dir(pipe) \
|
||||
(usb_pipeout(pipe) ? "out" : "in")
|
||||
#define str_type(pipe) \
|
||||
({ \
|
||||
char *s = "?"; \
|
||||
switch (usb_pipetype(pipe)) { \
|
||||
case PIPE_ISOCHRONOUS: s = "iso"; break; \
|
||||
case PIPE_INTERRUPT: s = "intr"; break; \
|
||||
case PIPE_CONTROL: s = "ctrl"; break; \
|
||||
case PIPE_BULK: s = "bulk"; break; \
|
||||
}; \
|
||||
s; \
|
||||
})
|
9918
target/linux/etrax/files-2.6.30/drivers/usb/host/hc-crisv10.c
Normal file
9918
target/linux/etrax/files-2.6.30/drivers/usb/host/hc-crisv10.c
Normal file
File diff suppressed because it is too large
Load diff
666
target/linux/etrax/files-2.6.30/drivers/usb/host/hc-crisv10.h
Normal file
666
target/linux/etrax/files-2.6.30/drivers/usb/host/hc-crisv10.h
Normal file
|
@ -0,0 +1,666 @@
|
|||
#ifndef __LINUX_ETRAX_USB_H
|
||||
#define __LINUX_ETRAX_USB_H
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/list.h>
|
||||
|
||||
struct USB_IN_Desc {
|
||||
volatile __u16 sw_len;
|
||||
volatile __u16 command;
|
||||
volatile unsigned long next;
|
||||
volatile unsigned long buf;
|
||||
volatile __u16 hw_len;
|
||||
volatile __u16 status;
|
||||
};
|
||||
|
||||
struct USB_SB_Desc {
|
||||
volatile __u16 sw_len;
|
||||
volatile __u16 command;
|
||||
volatile unsigned long next;
|
||||
volatile unsigned long buf;
|
||||
};
|
||||
|
||||
struct USB_EP_Desc {
|
||||
volatile __u16 hw_len;
|
||||
volatile __u16 command;
|
||||
volatile unsigned long sub;
|
||||
volatile unsigned long next;
|
||||
};
|
||||
|
||||
|
||||
/* Root Hub port status struct */
|
||||
struct crisv10_rh {
|
||||
volatile __u16 wPortChange[2];
|
||||
volatile __u16 wPortStatusPrev[2];
|
||||
};
|
||||
|
||||
/* HCD description */
|
||||
struct crisv10_hcd {
|
||||
spinlock_t lock;
|
||||
__u8 num_ports;
|
||||
__u8 running;
|
||||
};
|
||||
|
||||
|
||||
/* Endpoint HC private data description */
|
||||
struct crisv10_ep_priv {
|
||||
int epid;
|
||||
};
|
||||
|
||||
/* Additional software state info for a USB Controller epid */
|
||||
struct etrax_epid {
|
||||
__u8 inuse; /* !0 = setup in Etrax and used for a endpoint */
|
||||
__u8 disabled; /* !0 = Temporarly disabled to avoid resubmission */
|
||||
__u8 type; /* Setup as: PIPE_BULK, PIPE_CONTROL ... */
|
||||
__u8 out_traffic; /* !0 = This epid is for out traffic */
|
||||
};
|
||||
|
||||
/* Struct to hold information of scheduled later URB completion */
|
||||
struct urb_later_data {
|
||||
struct delayed_work dws;
|
||||
struct usb_hcd *hcd;
|
||||
struct urb *urb;
|
||||
int urb_num;
|
||||
int status;
|
||||
};
|
||||
|
||||
|
||||
typedef enum {
|
||||
STARTED,
|
||||
NOT_STARTED,
|
||||
UNLINK,
|
||||
} crisv10_urb_state_t;
|
||||
|
||||
|
||||
struct crisv10_urb_priv {
|
||||
/* Sequence number for this URB. Every new submited URB gets this from
|
||||
a incrementing counter. Used when a URB is scheduled for later finish to
|
||||
be sure that the intended URB hasn't already been completed (device
|
||||
drivers has a tendency to reuse URBs once they are completed, causing us
|
||||
to not be able to single old ones out only based on the URB pointer.) */
|
||||
__u32 urb_num;
|
||||
|
||||
/* The first_sb field is used for freeing all SB descriptors belonging
|
||||
to an urb. The corresponding ep descriptor's sub pointer cannot be
|
||||
used for this since the DMA advances the sub pointer as it processes
|
||||
the sb list. */
|
||||
struct USB_SB_Desc *first_sb;
|
||||
|
||||
/* The last_sb field referes to the last SB descriptor that belongs to
|
||||
this urb. This is important to know so we can free the SB descriptors
|
||||
that ranges between first_sb and last_sb. */
|
||||
struct USB_SB_Desc *last_sb;
|
||||
|
||||
/* The rx_offset field is used in ctrl and bulk traffic to keep track
|
||||
of the offset in the urb's transfer_buffer where incoming data should be
|
||||
copied to. */
|
||||
__u32 rx_offset;
|
||||
|
||||
/* Counter used in isochronous transfers to keep track of the
|
||||
number of packets received/transmitted. */
|
||||
__u32 isoc_packet_counter;
|
||||
|
||||
/* Flag that marks if this Isoc Out URB has finished it's transfer. Used
|
||||
because several URBs can be finished before list is processed */
|
||||
__u8 isoc_out_done;
|
||||
|
||||
/* This field is used to pass information about the urb's current state
|
||||
between the various interrupt handlers (thus marked volatile). */
|
||||
volatile crisv10_urb_state_t urb_state;
|
||||
|
||||
/* In Ctrl transfers consist of (at least) 3 packets: SETUP, IN and ZOUT.
|
||||
When DMA8 sub-channel 2 has processed the SB list for this sequence we
|
||||
get a interrupt. We also get a interrupt for In transfers and which
|
||||
one of these interrupts that comes first depends of data size and device.
|
||||
To be sure that we have got both interrupts before we complete the URB
|
||||
we have these to flags that shows which part that has completed.
|
||||
We can then check when we get one of the interrupts that if the other has
|
||||
occured it's safe for us to complete the URB, otherwise we set appropriate
|
||||
flag and do the completion when we get the other interrupt. */
|
||||
volatile unsigned char ctrl_zout_done;
|
||||
volatile unsigned char ctrl_rx_done;
|
||||
|
||||
/* Connection between the submitted urb and ETRAX epid number */
|
||||
__u8 epid;
|
||||
|
||||
/* The rx_data_list field is used for periodic traffic, to hold
|
||||
received data for later processing in the the complete_urb functions,
|
||||
where the data us copied to the urb's transfer_buffer. Basically, we
|
||||
use this intermediate storage because we don't know when it's safe to
|
||||
reuse the transfer_buffer (FIXME?). */
|
||||
struct list_head rx_data_list;
|
||||
|
||||
|
||||
/* The interval time rounded up to closest 2^N */
|
||||
int interval;
|
||||
|
||||
/* Pool of EP descriptors needed if it's a INTR transfer.
|
||||
Amount of EPs in pool correspons to how many INTR that should
|
||||
be inserted in TxIntrEPList (max 128, defined by MAX_INTR_INTERVAL) */
|
||||
struct USB_EP_Desc* intr_ep_pool[128];
|
||||
|
||||
/* The mount of EPs allocated for this INTR URB */
|
||||
int intr_ep_pool_length;
|
||||
|
||||
/* Pointer to info struct if URB is scheduled to be finished later */
|
||||
struct urb_later_data* later_data;
|
||||
|
||||
/* Allocated bandwidth for isochronous and interrupt traffic */
|
||||
int bandwidth;
|
||||
};
|
||||
|
||||
|
||||
/* This struct is for passing data from the top half to the bottom half irq
|
||||
handlers */
|
||||
struct crisv10_irq_reg {
|
||||
struct usb_hcd* hcd;
|
||||
__u32 r_usb_epid_attn;
|
||||
__u8 r_usb_status;
|
||||
__u16 r_usb_rh_port_status_1;
|
||||
__u16 r_usb_rh_port_status_2;
|
||||
__u32 r_usb_irq_mask_read;
|
||||
__u32 r_usb_fm_number;
|
||||
struct work_struct usb_bh;
|
||||
};
|
||||
|
||||
|
||||
/* This struct is for passing data from the isoc top half to the isoc bottom
|
||||
half. */
|
||||
struct crisv10_isoc_complete_data {
|
||||
struct usb_hcd *hcd;
|
||||
struct urb *urb;
|
||||
struct work_struct usb_bh;
|
||||
};
|
||||
|
||||
/* Entry item for URB lists for each endpint */
|
||||
typedef struct urb_entry
|
||||
{
|
||||
struct urb *urb;
|
||||
struct list_head list;
|
||||
} urb_entry_t;
|
||||
|
||||
/* ---------------------------------------------------------------------------
|
||||
Virtual Root HUB
|
||||
------------------------------------------------------------------------- */
|
||||
/* destination of request */
|
||||
#define RH_INTERFACE 0x01
|
||||
#define RH_ENDPOINT 0x02
|
||||
#define RH_OTHER 0x03
|
||||
|
||||
#define RH_CLASS 0x20
|
||||
#define RH_VENDOR 0x40
|
||||
|
||||
/* Requests: bRequest << 8 | bmRequestType */
|
||||
#define RH_GET_STATUS 0x0080
|
||||
#define RH_CLEAR_FEATURE 0x0100
|
||||
#define RH_SET_FEATURE 0x0300
|
||||
#define RH_SET_ADDRESS 0x0500
|
||||
#define RH_GET_DESCRIPTOR 0x0680
|
||||
#define RH_SET_DESCRIPTOR 0x0700
|
||||
#define RH_GET_CONFIGURATION 0x0880
|
||||
#define RH_SET_CONFIGURATION 0x0900
|
||||
#define RH_GET_STATE 0x0280
|
||||
#define RH_GET_INTERFACE 0x0A80
|
||||
#define RH_SET_INTERFACE 0x0B00
|
||||
#define RH_SYNC_FRAME 0x0C80
|
||||
/* Our Vendor Specific Request */
|
||||
#define RH_SET_EP 0x2000
|
||||
|
||||
|
||||
/* Hub port features */
|
||||
#define RH_PORT_CONNECTION 0x00
|
||||
#define RH_PORT_ENABLE 0x01
|
||||
#define RH_PORT_SUSPEND 0x02
|
||||
#define RH_PORT_OVER_CURRENT 0x03
|
||||
#define RH_PORT_RESET 0x04
|
||||
#define RH_PORT_POWER 0x08
|
||||
#define RH_PORT_LOW_SPEED 0x09
|
||||
#define RH_C_PORT_CONNECTION 0x10
|
||||
#define RH_C_PORT_ENABLE 0x11
|
||||
#define RH_C_PORT_SUSPEND 0x12
|
||||
#define RH_C_PORT_OVER_CURRENT 0x13
|
||||
#define RH_C_PORT_RESET 0x14
|
||||
|
||||
/* Hub features */
|
||||
#define RH_C_HUB_LOCAL_POWER 0x00
|
||||
#define RH_C_HUB_OVER_CURRENT 0x01
|
||||
|
||||
#define RH_DEVICE_REMOTE_WAKEUP 0x00
|
||||
#define RH_ENDPOINT_STALL 0x01
|
||||
|
||||
/* Our Vendor Specific feature */
|
||||
#define RH_REMOVE_EP 0x00
|
||||
|
||||
|
||||
#define RH_ACK 0x01
|
||||
#define RH_REQ_ERR -1
|
||||
#define RH_NACK 0x00
|
||||
|
||||
/* Field definitions for */
|
||||
|
||||
#define USB_IN_command__eol__BITNR 0 /* command macros */
|
||||
#define USB_IN_command__eol__WIDTH 1
|
||||
#define USB_IN_command__eol__no 0
|
||||
#define USB_IN_command__eol__yes 1
|
||||
|
||||
#define USB_IN_command__intr__BITNR 3
|
||||
#define USB_IN_command__intr__WIDTH 1
|
||||
#define USB_IN_command__intr__no 0
|
||||
#define USB_IN_command__intr__yes 1
|
||||
|
||||
#define USB_IN_status__eop__BITNR 1 /* status macros. */
|
||||
#define USB_IN_status__eop__WIDTH 1
|
||||
#define USB_IN_status__eop__no 0
|
||||
#define USB_IN_status__eop__yes 1
|
||||
|
||||
#define USB_IN_status__eot__BITNR 5
|
||||
#define USB_IN_status__eot__WIDTH 1
|
||||
#define USB_IN_status__eot__no 0
|
||||
#define USB_IN_status__eot__yes 1
|
||||
|
||||
#define USB_IN_status__error__BITNR 6
|
||||
#define USB_IN_status__error__WIDTH 1
|
||||
#define USB_IN_status__error__no 0
|
||||
#define USB_IN_status__error__yes 1
|
||||
|
||||
#define USB_IN_status__nodata__BITNR 7
|
||||
#define USB_IN_status__nodata__WIDTH 1
|
||||
#define USB_IN_status__nodata__no 0
|
||||
#define USB_IN_status__nodata__yes 1
|
||||
|
||||
#define USB_IN_status__epid__BITNR 8
|
||||
#define USB_IN_status__epid__WIDTH 5
|
||||
|
||||
#define USB_EP_command__eol__BITNR 0
|
||||
#define USB_EP_command__eol__WIDTH 1
|
||||
#define USB_EP_command__eol__no 0
|
||||
#define USB_EP_command__eol__yes 1
|
||||
|
||||
#define USB_EP_command__eof__BITNR 1
|
||||
#define USB_EP_command__eof__WIDTH 1
|
||||
#define USB_EP_command__eof__no 0
|
||||
#define USB_EP_command__eof__yes 1
|
||||
|
||||
#define USB_EP_command__intr__BITNR 3
|
||||
#define USB_EP_command__intr__WIDTH 1
|
||||
#define USB_EP_command__intr__no 0
|
||||
#define USB_EP_command__intr__yes 1
|
||||
|
||||
#define USB_EP_command__enable__BITNR 4
|
||||
#define USB_EP_command__enable__WIDTH 1
|
||||
#define USB_EP_command__enable__no 0
|
||||
#define USB_EP_command__enable__yes 1
|
||||
|
||||
#define USB_EP_command__hw_valid__BITNR 5
|
||||
#define USB_EP_command__hw_valid__WIDTH 1
|
||||
#define USB_EP_command__hw_valid__no 0
|
||||
#define USB_EP_command__hw_valid__yes 1
|
||||
|
||||
#define USB_EP_command__epid__BITNR 8
|
||||
#define USB_EP_command__epid__WIDTH 5
|
||||
|
||||
#define USB_SB_command__eol__BITNR 0 /* command macros. */
|
||||
#define USB_SB_command__eol__WIDTH 1
|
||||
#define USB_SB_command__eol__no 0
|
||||
#define USB_SB_command__eol__yes 1
|
||||
|
||||
#define USB_SB_command__eot__BITNR 1
|
||||
#define USB_SB_command__eot__WIDTH 1
|
||||
#define USB_SB_command__eot__no 0
|
||||
#define USB_SB_command__eot__yes 1
|
||||
|
||||
#define USB_SB_command__intr__BITNR 3
|
||||
#define USB_SB_command__intr__WIDTH 1
|
||||
#define USB_SB_command__intr__no 0
|
||||
#define USB_SB_command__intr__yes 1
|
||||
|
||||
#define USB_SB_command__tt__BITNR 4
|
||||
#define USB_SB_command__tt__WIDTH 2
|
||||
#define USB_SB_command__tt__zout 0
|
||||
#define USB_SB_command__tt__in 1
|
||||
#define USB_SB_command__tt__out 2
|
||||
#define USB_SB_command__tt__setup 3
|
||||
|
||||
|
||||
#define USB_SB_command__rem__BITNR 8
|
||||
#define USB_SB_command__rem__WIDTH 6
|
||||
|
||||
#define USB_SB_command__full__BITNR 6
|
||||
#define USB_SB_command__full__WIDTH 1
|
||||
#define USB_SB_command__full__no 0
|
||||
#define USB_SB_command__full__yes 1
|
||||
|
||||
#endif
|
||||
#ifndef __LINUX_ETRAX_USB_H
|
||||
#define __LINUX_ETRAX_USB_H
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/list.h>
|
||||
|
||||
struct USB_IN_Desc {
|
||||
volatile __u16 sw_len;
|
||||
volatile __u16 command;
|
||||
volatile unsigned long next;
|
||||
volatile unsigned long buf;
|
||||
volatile __u16 hw_len;
|
||||
volatile __u16 status;
|
||||
};
|
||||
|
||||
struct USB_SB_Desc {
|
||||
volatile __u16 sw_len;
|
||||
volatile __u16 command;
|
||||
volatile unsigned long next;
|
||||
volatile unsigned long buf;
|
||||
};
|
||||
|
||||
struct USB_EP_Desc {
|
||||
volatile __u16 hw_len;
|
||||
volatile __u16 command;
|
||||
volatile unsigned long sub;
|
||||
volatile unsigned long next;
|
||||
};
|
||||
|
||||
|
||||
/* Root Hub port status struct */
|
||||
struct crisv10_rh {
|
||||
volatile __u16 wPortChange[2];
|
||||
volatile __u16 wPortStatusPrev[2];
|
||||
};
|
||||
|
||||
/* HCD description */
|
||||
struct crisv10_hcd {
|
||||
spinlock_t lock;
|
||||
__u8 num_ports;
|
||||
__u8 running;
|
||||
};
|
||||
|
||||
|
||||
/* Endpoint HC private data description */
|
||||
struct crisv10_ep_priv {
|
||||
int epid;
|
||||
};
|
||||
|
||||
/* Additional software state info for a USB Controller epid */
|
||||
struct etrax_epid {
|
||||
__u8 inuse; /* !0 = setup in Etrax and used for a endpoint */
|
||||
__u8 disabled; /* !0 = Temporarly disabled to avoid resubmission */
|
||||
__u8 type; /* Setup as: PIPE_BULK, PIPE_CONTROL ... */
|
||||
__u8 out_traffic; /* !0 = This epid is for out traffic */
|
||||
};
|
||||
|
||||
/* Struct to hold information of scheduled later URB completion */
|
||||
struct urb_later_data {
|
||||
struct delayed_work dws;
|
||||
struct usb_hcd *hcd;
|
||||
struct urb *urb;
|
||||
int urb_num;
|
||||
int status;
|
||||
};
|
||||
|
||||
|
||||
typedef enum {
|
||||
STARTED,
|
||||
NOT_STARTED,
|
||||
UNLINK,
|
||||
} crisv10_urb_state_t;
|
||||
|
||||
|
||||
struct crisv10_urb_priv {
|
||||
/* Sequence number for this URB. Every new submited URB gets this from
|
||||
a incrementing counter. Used when a URB is scheduled for later finish to
|
||||
be sure that the intended URB hasn't already been completed (device
|
||||
drivers has a tendency to reuse URBs once they are completed, causing us
|
||||
to not be able to single old ones out only based on the URB pointer.) */
|
||||
__u32 urb_num;
|
||||
|
||||
/* The first_sb field is used for freeing all SB descriptors belonging
|
||||
to an urb. The corresponding ep descriptor's sub pointer cannot be
|
||||
used for this since the DMA advances the sub pointer as it processes
|
||||
the sb list. */
|
||||
struct USB_SB_Desc *first_sb;
|
||||
|
||||
/* The last_sb field referes to the last SB descriptor that belongs to
|
||||
this urb. This is important to know so we can free the SB descriptors
|
||||
that ranges between first_sb and last_sb. */
|
||||
struct USB_SB_Desc *last_sb;
|
||||
|
||||
/* The rx_offset field is used in ctrl and bulk traffic to keep track
|
||||
of the offset in the urb's transfer_buffer where incoming data should be
|
||||
copied to. */
|
||||
__u32 rx_offset;
|
||||
|
||||
/* Counter used in isochronous transfers to keep track of the
|
||||
number of packets received/transmitted. */
|
||||
__u32 isoc_packet_counter;
|
||||
|
||||
/* Flag that marks if this Isoc Out URB has finished it's transfer. Used
|
||||
because several URBs can be finished before list is processed */
|
||||
__u8 isoc_out_done;
|
||||
|
||||
/* This field is used to pass information about the urb's current state
|
||||
between the various interrupt handlers (thus marked volatile). */
|
||||
volatile crisv10_urb_state_t urb_state;
|
||||
|
||||
/* In Ctrl transfers consist of (at least) 3 packets: SETUP, IN and ZOUT.
|
||||
When DMA8 sub-channel 2 has processed the SB list for this sequence we
|
||||
get a interrupt. We also get a interrupt for In transfers and which
|
||||
one of these interrupts that comes first depends of data size and device.
|
||||
To be sure that we have got both interrupts before we complete the URB
|
||||
we have these to flags that shows which part that has completed.
|
||||
We can then check when we get one of the interrupts that if the other has
|
||||
occured it's safe for us to complete the URB, otherwise we set appropriate
|
||||
flag and do the completion when we get the other interrupt. */
|
||||
volatile unsigned char ctrl_zout_done;
|
||||
volatile unsigned char ctrl_rx_done;
|
||||
|
||||
/* Connection between the submitted urb and ETRAX epid number */
|
||||
__u8 epid;
|
||||
|
||||
/* The rx_data_list field is used for periodic traffic, to hold
|
||||
received data for later processing in the the complete_urb functions,
|
||||
where the data us copied to the urb's transfer_buffer. Basically, we
|
||||
use this intermediate storage because we don't know when it's safe to
|
||||
reuse the transfer_buffer (FIXME?). */
|
||||
struct list_head rx_data_list;
|
||||
|
||||
|
||||
/* The interval time rounded up to closest 2^N */
|
||||
int interval;
|
||||
|
||||
/* Pool of EP descriptors needed if it's a INTR transfer.
|
||||
Amount of EPs in pool correspons to how many INTR that should
|
||||
be inserted in TxIntrEPList (max 128, defined by MAX_INTR_INTERVAL) */
|
||||
struct USB_EP_Desc* intr_ep_pool[128];
|
||||
|
||||
/* The mount of EPs allocated for this INTR URB */
|
||||
int intr_ep_pool_length;
|
||||
|
||||
/* Pointer to info struct if URB is scheduled to be finished later */
|
||||
struct urb_later_data* later_data;
|
||||
|
||||
/* Allocated bandwidth for isochronous and interrupt traffic */
|
||||
int bandwidth;
|
||||
};
|
||||
|
||||
|
||||
/* This struct is for passing data from the top half to the bottom half irq
|
||||
handlers */
|
||||
struct crisv10_irq_reg {
|
||||
struct usb_hcd* hcd;
|
||||
__u32 r_usb_epid_attn;
|
||||
__u8 r_usb_status;
|
||||
__u16 r_usb_rh_port_status_1;
|
||||
__u16 r_usb_rh_port_status_2;
|
||||
__u32 r_usb_irq_mask_read;
|
||||
__u32 r_usb_fm_number;
|
||||
struct work_struct usb_bh;
|
||||
};
|
||||
|
||||
|
||||
/* This struct is for passing data from the isoc top half to the isoc bottom
|
||||
half. */
|
||||
struct crisv10_isoc_complete_data {
|
||||
struct usb_hcd *hcd;
|
||||
struct urb *urb;
|
||||
struct work_struct usb_bh;
|
||||
};
|
||||
|
||||
/* Entry item for URB lists for each endpint */
|
||||
typedef struct urb_entry
|
||||
{
|
||||
struct urb *urb;
|
||||
struct list_head list;
|
||||
} urb_entry_t;
|
||||
|
||||
/* ---------------------------------------------------------------------------
|
||||
Virtual Root HUB
|
||||
------------------------------------------------------------------------- */
|
||||
/* destination of request */
|
||||
#define RH_INTERFACE 0x01
|
||||
#define RH_ENDPOINT 0x02
|
||||
#define RH_OTHER 0x03
|
||||
|
||||
#define RH_CLASS 0x20
|
||||
#define RH_VENDOR 0x40
|
||||
|
||||
/* Requests: bRequest << 8 | bmRequestType */
|
||||
#define RH_GET_STATUS 0x0080
|
||||
#define RH_CLEAR_FEATURE 0x0100
|
||||
#define RH_SET_FEATURE 0x0300
|
||||
#define RH_SET_ADDRESS 0x0500
|
||||
#define RH_GET_DESCRIPTOR 0x0680
|
||||
#define RH_SET_DESCRIPTOR 0x0700
|
||||
#define RH_GET_CONFIGURATION 0x0880
|
||||
#define RH_SET_CONFIGURATION 0x0900
|
||||
#define RH_GET_STATE 0x0280
|
||||
#define RH_GET_INTERFACE 0x0A80
|
||||
#define RH_SET_INTERFACE 0x0B00
|
||||
#define RH_SYNC_FRAME 0x0C80
|
||||
/* Our Vendor Specific Request */
|
||||
#define RH_SET_EP 0x2000
|
||||
|
||||
|
||||
/* Hub port features */
|
||||
#define RH_PORT_CONNECTION 0x00
|
||||
#define RH_PORT_ENABLE 0x01
|
||||
#define RH_PORT_SUSPEND 0x02
|
||||
#define RH_PORT_OVER_CURRENT 0x03
|
||||
#define RH_PORT_RESET 0x04
|
||||
#define RH_PORT_POWER 0x08
|
||||
#define RH_PORT_LOW_SPEED 0x09
|
||||
#define RH_C_PORT_CONNECTION 0x10
|
||||
#define RH_C_PORT_ENABLE 0x11
|
||||
#define RH_C_PORT_SUSPEND 0x12
|
||||
#define RH_C_PORT_OVER_CURRENT 0x13
|
||||
#define RH_C_PORT_RESET 0x14
|
||||
|
||||
/* Hub features */
|
||||
#define RH_C_HUB_LOCAL_POWER 0x00
|
||||
#define RH_C_HUB_OVER_CURRENT 0x01
|
||||
|
||||
#define RH_DEVICE_REMOTE_WAKEUP 0x00
|
||||
#define RH_ENDPOINT_STALL 0x01
|
||||
|
||||
/* Our Vendor Specific feature */
|
||||
#define RH_REMOVE_EP 0x00
|
||||
|
||||
|
||||
#define RH_ACK 0x01
|
||||
#define RH_REQ_ERR -1
|
||||
#define RH_NACK 0x00
|
||||
|
||||
/* Field definitions for */
|
||||
|
||||
#define USB_IN_command__eol__BITNR 0 /* command macros */
|
||||
#define USB_IN_command__eol__WIDTH 1
|
||||
#define USB_IN_command__eol__no 0
|
||||
#define USB_IN_command__eol__yes 1
|
||||
|
||||
#define USB_IN_command__intr__BITNR 3
|
||||
#define USB_IN_command__intr__WIDTH 1
|
||||
#define USB_IN_command__intr__no 0
|
||||
#define USB_IN_command__intr__yes 1
|
||||
|
||||
#define USB_IN_status__eop__BITNR 1 /* status macros. */
|
||||
#define USB_IN_status__eop__WIDTH 1
|
||||
#define USB_IN_status__eop__no 0
|
||||
#define USB_IN_status__eop__yes 1
|
||||
|
||||
#define USB_IN_status__eot__BITNR 5
|
||||
#define USB_IN_status__eot__WIDTH 1
|
||||
#define USB_IN_status__eot__no 0
|
||||
#define USB_IN_status__eot__yes 1
|
||||
|
||||
#define USB_IN_status__error__BITNR 6
|
||||
#define USB_IN_status__error__WIDTH 1
|
||||
#define USB_IN_status__error__no 0
|
||||
#define USB_IN_status__error__yes 1
|
||||
|
||||
#define USB_IN_status__nodata__BITNR 7
|
||||
#define USB_IN_status__nodata__WIDTH 1
|
||||
#define USB_IN_status__nodata__no 0
|
||||
#define USB_IN_status__nodata__yes 1
|
||||
|
||||
#define USB_IN_status__epid__BITNR 8
|
||||
#define USB_IN_status__epid__WIDTH 5
|
||||
|
||||
#define USB_EP_command__eol__BITNR 0
|
||||
#define USB_EP_command__eol__WIDTH 1
|
||||
#define USB_EP_command__eol__no 0
|
||||
#define USB_EP_command__eol__yes 1
|
||||
|
||||
#define USB_EP_command__eof__BITNR 1
|
||||
#define USB_EP_command__eof__WIDTH 1
|
||||
#define USB_EP_command__eof__no 0
|
||||
#define USB_EP_command__eof__yes 1
|
||||
|
||||
#define USB_EP_command__intr__BITNR 3
|
||||
#define USB_EP_command__intr__WIDTH 1
|
||||
#define USB_EP_command__intr__no 0
|
||||
#define USB_EP_command__intr__yes 1
|
||||
|
||||
#define USB_EP_command__enable__BITNR 4
|
||||
#define USB_EP_command__enable__WIDTH 1
|
||||
#define USB_EP_command__enable__no 0
|
||||
#define USB_EP_command__enable__yes 1
|
||||
|
||||
#define USB_EP_command__hw_valid__BITNR 5
|
||||
#define USB_EP_command__hw_valid__WIDTH 1
|
||||
#define USB_EP_command__hw_valid__no 0
|
||||
#define USB_EP_command__hw_valid__yes 1
|
||||
|
||||
#define USB_EP_command__epid__BITNR 8
|
||||
#define USB_EP_command__epid__WIDTH 5
|
||||
|
||||
#define USB_SB_command__eol__BITNR 0 /* command macros. */
|
||||
#define USB_SB_command__eol__WIDTH 1
|
||||
#define USB_SB_command__eol__no 0
|
||||
#define USB_SB_command__eol__yes 1
|
||||
|
||||
#define USB_SB_command__eot__BITNR 1
|
||||
#define USB_SB_command__eot__WIDTH 1
|
||||
#define USB_SB_command__eot__no 0
|
||||
#define USB_SB_command__eot__yes 1
|
||||
|
||||
#define USB_SB_command__intr__BITNR 3
|
||||
#define USB_SB_command__intr__WIDTH 1
|
||||
#define USB_SB_command__intr__no 0
|
||||
#define USB_SB_command__intr__yes 1
|
||||
|
||||
#define USB_SB_command__tt__BITNR 4
|
||||
#define USB_SB_command__tt__WIDTH 2
|
||||
#define USB_SB_command__tt__zout 0
|
||||
#define USB_SB_command__tt__in 1
|
||||
#define USB_SB_command__tt__out 2
|
||||
#define USB_SB_command__tt__setup 3
|
||||
|
||||
|
||||
#define USB_SB_command__rem__BITNR 8
|
||||
#define USB_SB_command__rem__WIDTH 6
|
||||
|
||||
#define USB_SB_command__full__BITNR 6
|
||||
#define USB_SB_command__full__WIDTH 1
|
||||
#define USB_SB_command__full__no 0
|
||||
#define USB_SB_command__full__yes 1
|
||||
|
||||
#endif
|
24
target/linux/etrax/patches-2.6.30/300-usb_support.patch
Normal file
24
target/linux/etrax/patches-2.6.30/300-usb_support.patch
Normal file
|
@ -0,0 +1,24 @@
|
|||
Index: linux-2.6.30-rc5/drivers/usb/host/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.30-rc5.orig/drivers/usb/host/Makefile 2009-05-09 02:14:14.000000000 +0200
|
||||
+++ linux-2.6.30-rc5/drivers/usb/host/Makefile 2009-05-13 14:07:10.000000000 +0200
|
||||
@@ -25,6 +25,7 @@
|
||||
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
|
||||
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
|
||||
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
|
||||
+obj-$(CONFIG_ETRAX_ARCH_V10) += hc-crisv10.o
|
||||
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
|
||||
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
|
||||
obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
|
||||
Index: linux-2.6.30-rc5/drivers/usb/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.30-rc5.orig/drivers/usb/Makefile 2009-05-13 14:06:45.000000000 +0200
|
||||
+++ linux-2.6.30-rc5/drivers/usb/Makefile 2009-05-13 14:07:10.000000000 +0200
|
||||
@@ -20,6 +20,7 @@
|
||||
obj-$(CONFIG_USB_R8A66597_HCD) += host/
|
||||
obj-$(CONFIG_USB_HWA_HCD) += host/
|
||||
obj-$(CONFIG_USB_ISP1760_HCD) += host/
|
||||
+obj-$(CONFIG_ETRAX_USB_HOST) += host/
|
||||
|
||||
obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
|
||||
|
Loading…
Reference in a new issue