initial support for 2.6.30
SVN-Revision: 16901
This commit is contained in:
parent
72b3866adb
commit
9f973a6098
5 changed files with 904 additions and 0 deletions
194
target/linux/ppc40x/config-2.6.30
Normal file
194
target/linux/ppc40x/config-2.6.30
Normal file
|
@ -0,0 +1,194 @@
|
|||
CONFIG_405EP=y
|
||||
CONFIG_405EX=y
|
||||
CONFIG_40x=y
|
||||
# CONFIG_44x is not set
|
||||
CONFIG_4xx=y
|
||||
CONFIG_4xx_SOC=y
|
||||
# CONFIG_6xx is not set
|
||||
# CONFIG_ACADIA is not set
|
||||
# CONFIG_ADVANCED_OPTIONS is not set
|
||||
# CONFIG_AGP is not set
|
||||
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
|
||||
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
|
||||
CONFIG_ARCH_HAS_ILOG2_U32=y
|
||||
CONFIG_ARCH_HAS_WALK_MEMORY=y
|
||||
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
|
||||
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
|
||||
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
|
||||
CONFIG_ARCH_SUPPORTS_MSI=y
|
||||
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
|
||||
CONFIG_AUDIT_ARCH=y
|
||||
CONFIG_BASE_SMALL=0
|
||||
# CONFIG_BINARY_PRINTF is not set
|
||||
CONFIG_BITREVERSE=y
|
||||
# CONFIG_BOOKE_WDT is not set
|
||||
CONFIG_BOUNCE=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
CONFIG_CONSISTENT_SIZE=0x00200000
|
||||
# CONFIG_CPU_FREQ is not set
|
||||
CONFIG_CRYPTO_AEAD2=y
|
||||
CONFIG_CRYPTO_BLKCIPHER2=y
|
||||
CONFIG_CRYPTO_HASH2=y
|
||||
CONFIG_CRYPTO_MANAGER2=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_WORKQUEUE=y
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
# CONFIG_DEFAULT_UIMAGE is not set
|
||||
CONFIG_DEVPORT=y
|
||||
CONFIG_DTC=y
|
||||
# CONFIG_E200 is not set
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_EDAC is not set
|
||||
# CONFIG_EP405 is not set
|
||||
CONFIG_EXTRA_TARGETS="uImage"
|
||||
CONFIG_FORCE_MAX_ZONEORDER=11
|
||||
# CONFIG_FSL_ULI1575 is not set
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
# CONFIG_GENERIC_IOMAP is not set
|
||||
CONFIG_GENERIC_NVRAM=y
|
||||
# CONFIG_GENERIC_TBSYNC is not set
|
||||
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||
# CONFIG_GEN_RTC is not set
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
# CONFIG_HAS_RAPIDIO is not set
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_ARCH_TRACEHOOK=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_IOREMAP_PROT=y
|
||||
CONFIG_HAVE_KPROBES=y
|
||||
CONFIG_HAVE_KRETPROBES=y
|
||||
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
|
||||
CONFIG_HAVE_LMB=y
|
||||
CONFIG_HAVE_MLOCK=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
|
||||
# CONFIG_HCU4 is not set
|
||||
# CONFIG_HVC_UDBG is not set
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HZ=250
|
||||
# CONFIG_HZ_100 is not set
|
||||
CONFIG_HZ_250=y
|
||||
# CONFIG_I2C is not set
|
||||
CONFIG_IBM_NEW_EMAC=y
|
||||
# CONFIG_IBM_NEW_EMAC_DEBUG is not set
|
||||
CONFIG_IBM_NEW_EMAC_EMAC4=y
|
||||
CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
|
||||
CONFIG_IBM_NEW_EMAC_RGMII=y
|
||||
CONFIG_IBM_NEW_EMAC_RXB=256
|
||||
CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
|
||||
CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
|
||||
CONFIG_IBM_NEW_EMAC_TXB=256
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
# CONFIG_IOMMU_HELPER is not set
|
||||
# CONFIG_IPIC is not set
|
||||
# CONFIG_IRQSTACKS is not set
|
||||
CONFIG_IRQ_PER_CPU=y
|
||||
CONFIG_ISA_DMA_API=y
|
||||
CONFIG_KERNEL_START=0xc0000000
|
||||
CONFIG_KILAUEA=y
|
||||
# CONFIG_LEDS_GPIO is not set
|
||||
CONFIG_LOWMEM_SIZE=0x30000000
|
||||
# CONFIG_MACINTOSH_DRIVERS is not set
|
||||
CONFIG_MAGICBOXV1=y
|
||||
CONFIG_MAGICBOXV2=y
|
||||
# CONFIG_MAKALU is not set
|
||||
# CONFIG_MATH_EMULATION is not set
|
||||
# CONFIG_MMIO_NVRAM is not set
|
||||
# CONFIG_MPIC is not set
|
||||
# CONFIG_MPIC_WEIRD is not set
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
# CONFIG_MTD_CFI_GEOMETRY is not set
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_OF_PARTS=y
|
||||
CONFIG_MTD_PHYSMAP_OF=y
|
||||
# CONFIG_NATSEMI is not set
|
||||
CONFIG_NOT_COHERENT_CACHE=y
|
||||
# CONFIG_NVRAM is not set
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_DEVICE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PAGE_OFFSET=0xc0000000
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEAER=y
|
||||
# CONFIG_PCIEASPM is not set
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PCI_SYSCALL=y
|
||||
CONFIG_PHYSICAL_START=0x00000000
|
||||
CONFIG_PPC=y
|
||||
CONFIG_PPC32=y
|
||||
CONFIG_PPC40x_SIMPLE=y
|
||||
CONFIG_PPC4xx_PCI_EXPRESS=y
|
||||
# CONFIG_PPC64 is not set
|
||||
# CONFIG_PPC_16K_PAGES is not set
|
||||
# CONFIG_PPC_256K_PAGES is not set
|
||||
CONFIG_PPC_4K_PAGES=y
|
||||
# CONFIG_PPC_64K_PAGES is not set
|
||||
# CONFIG_PPC_85xx is not set
|
||||
# CONFIG_PPC_8xx is not set
|
||||
# CONFIG_PPC_970_NAP is not set
|
||||
# CONFIG_PPC_CELL is not set
|
||||
# CONFIG_PPC_CELL_NATIVE is not set
|
||||
# CONFIG_PPC_CLOCK is not set
|
||||
CONFIG_PPC_DCR=y
|
||||
# CONFIG_PPC_DCR_MMIO is not set
|
||||
CONFIG_PPC_DCR_NATIVE=y
|
||||
# CONFIG_PPC_EARLY_DEBUG is not set
|
||||
# CONFIG_PPC_I8259 is not set
|
||||
# CONFIG_PPC_INDIRECT_IO is not set
|
||||
CONFIG_PPC_INDIRECT_PCI=y
|
||||
CONFIG_PPC_MMU_NOHASH=y
|
||||
# CONFIG_PPC_MM_SLICES is not set
|
||||
# CONFIG_PPC_MPC106 is not set
|
||||
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
|
||||
CONFIG_PPC_OF=y
|
||||
CONFIG_PPC_PCI_CHOICE=y
|
||||
# CONFIG_PPC_RTAS is not set
|
||||
CONFIG_PPC_UDBG_16550=y
|
||||
# CONFIG_PQ2ADS is not set
|
||||
CONFIG_PRINT_STACK_DEPTH=64
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||
CONFIG_SCHED_HRTICK=y
|
||||
CONFIG_SCHED_OMIT_FRAME_POINTER=y
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
|
||||
CONFIG_SERIAL_8250_EXTENDED=y
|
||||
# CONFIG_SERIAL_8250_MANY_PORTS is not set
|
||||
# CONFIG_SERIAL_8250_RSA is not set
|
||||
CONFIG_SERIAL_8250_SHARE_IRQ=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
|
||||
# CONFIG_SIMPLE_GPIO is not set
|
||||
# CONFIG_SLOW_WORK is not set
|
||||
CONFIG_TASK_SIZE=0xc0000000
|
||||
CONFIG_TICK_ONESHOT=y
|
||||
CONFIG_TRACING_SUPPORT=y
|
||||
# CONFIG_WALNUT is not set
|
||||
CONFIG_WORD_SIZE=32
|
||||
# CONFIG_XILINX_SYSACE is not set
|
||||
# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
|
|
@ -0,0 +1,25 @@
|
|||
--- a/arch/powerpc/boot/dts/kilauea.dts
|
||||
+++ b/arch/powerpc/boot/dts/kilauea.dts
|
||||
@@ -150,15 +150,15 @@
|
||||
#size-cells = <1>;
|
||||
partition@0 {
|
||||
label = "kernel";
|
||||
- reg = <0x00000000 0x00200000>;
|
||||
+ reg = <0x00000000 0x001e0000>;
|
||||
};
|
||||
- partition@200000 {
|
||||
- label = "root";
|
||||
- reg = <0x00200000 0x00200000>;
|
||||
+ partition@1e0000 {
|
||||
+ label = "device-tree";
|
||||
+ reg = <0x001e0000 0x0020000>;
|
||||
};
|
||||
- partition@400000 {
|
||||
- label = "user";
|
||||
- reg = <0x00400000 0x03b60000>;
|
||||
+ partition@200000 {
|
||||
+ label = "rootfs";
|
||||
+ reg = <0x00200000 0x03d60000>;
|
||||
};
|
||||
partition@3f60000 {
|
||||
label = "env";
|
|
@ -0,0 +1,25 @@
|
|||
--- a/arch/powerpc/platforms/40x/kilauea.c
|
||||
+++ b/arch/powerpc/platforms/40x/kilauea.c
|
||||
@@ -21,6 +21,8 @@
|
||||
#include <asm/uic.h>
|
||||
#include <asm/pci-bridge.h>
|
||||
#include <asm/ppc4xx.h>
|
||||
+#include <asm/dcr.h>
|
||||
+#include <asm/dcr-regs.h>
|
||||
|
||||
static __initdata struct of_device_id kilauea_of_bus[] = {
|
||||
{ .compatible = "ibm,plb4", },
|
||||
@@ -46,6 +48,13 @@ static int __init kilauea_probe(void)
|
||||
|
||||
ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC);
|
||||
|
||||
+ /*
|
||||
+ * 405EX(r) has SDR0_MFR[E0CS/E1CS] set after reset. This selects
|
||||
+ * the internal loopback mode. Clear these bits so that both EMACs
|
||||
+ * don't use loopback mode as deafult.
|
||||
+ */
|
||||
+ mtdcri(SDR0, SDR0_MFR, mfdcri(SDR0, SDR0_MFR) & ~0x0c000000);
|
||||
+
|
||||
return 1;
|
||||
}
|
||||
|
313
target/linux/ppc40x/patches-2.6.30/005-magicboxv1.patch
Normal file
313
target/linux/ppc40x/patches-2.6.30/005-magicboxv1.patch
Normal file
|
@ -0,0 +1,313 @@
|
|||
--- /dev/null
|
||||
+++ b/arch/powerpc/boot/cuboot-magicboxv1.c
|
||||
@@ -0,0 +1,40 @@
|
||||
+/*
|
||||
+ * Old U-boot compatibility for Magicbox v1
|
||||
+ *
|
||||
+ * Author: Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ */
|
||||
+
|
||||
+#include "ops.h"
|
||||
+#include "io.h"
|
||||
+#include "dcr.h"
|
||||
+#include "stdio.h"
|
||||
+#include "4xx.h"
|
||||
+#include "44x.h"
|
||||
+#include "cuboot.h"
|
||||
+
|
||||
+#define TARGET_4xx
|
||||
+#define TARGET_405EP
|
||||
+#include "ppcboot.h"
|
||||
+
|
||||
+static bd_t bd;
|
||||
+
|
||||
+static void magicboxv1_fixups(void)
|
||||
+{
|
||||
+ ibm405ep_fixup_clocks(25000000);
|
||||
+ ibm4xx_sdram_fixup_memsize();
|
||||
+ dt_fixup_mac_addresses(&bd.bi_enetaddr);
|
||||
+}
|
||||
+
|
||||
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
||||
+ unsigned long r6, unsigned long r7)
|
||||
+{
|
||||
+ CUBOOT_INIT();
|
||||
+ platform_ops.fixups = magicboxv1_fixups;
|
||||
+ platform_ops.exit = ibm40x_dbcr_reset;
|
||||
+ fdt_init(_dtb_start);
|
||||
+ serial_console_init();
|
||||
+}
|
||||
--- /dev/null
|
||||
+++ b/arch/powerpc/boot/dts/magicboxv1.dts
|
||||
@@ -0,0 +1,217 @@
|
||||
+/*
|
||||
+ * Device Tree Source for Magicbox v1
|
||||
+ *
|
||||
+ * Copyright 2008 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * Based on walnut.dts
|
||||
+ *
|
||||
+ * This file is licensed under the terms of the GNU General Public
|
||||
+ * License version 2. This program is licensed "as is" without
|
||||
+ * any warranty of any kind, whether express or implied.
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+/ {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ model = "magicboxv1";
|
||||
+ compatible = "magicboxv1";
|
||||
+ dcr-parent = <&{/cpus/cpu@0}>;
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &EMAC;
|
||||
+ serial0 = &UART;
|
||||
+ };
|
||||
+
|
||||
+ cpus {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ cpu@0 {
|
||||
+ device_type = "cpu";
|
||||
+ model = "PowerPC,405EP";
|
||||
+ reg = <0x00000000>;
|
||||
+ clock-frequency = <0xbebc200>; /* Filled in by zImage */
|
||||
+ timebase-frequency = <0>; /* Filled in by zImage */
|
||||
+ i-cache-line-size = <20>;
|
||||
+ d-cache-line-size = <20>;
|
||||
+ i-cache-size = <4000>;
|
||||
+ d-cache-size = <4000>;
|
||||
+ dcr-controller;
|
||||
+ dcr-access-method = "native";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ memory {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */
|
||||
+ };
|
||||
+
|
||||
+ UIC0: interrupt-controller {
|
||||
+ compatible = "ibm,uic";
|
||||
+ interrupt-controller;
|
||||
+ cell-index = <0>;
|
||||
+ dcr-reg = <0x0c0 0x009>;
|
||||
+ #address-cells = <0>;
|
||||
+ #size-cells = <0>;
|
||||
+ #interrupt-cells = <2>;
|
||||
+ };
|
||||
+
|
||||
+ plb {
|
||||
+ compatible = "ibm,plb3";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ ranges;
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+
|
||||
+ SDRAM0: memory-controller {
|
||||
+ compatible = "ibm,sdram-405ep";
|
||||
+ dcr-reg = <0x010 0x002>;
|
||||
+ };
|
||||
+
|
||||
+ MAL: mcmal {
|
||||
+ compatible = "ibm,mcmal-405ep", "ibm,mcmal";
|
||||
+ dcr-reg = <0x180 0x062>;
|
||||
+ num-tx-chans = <4>;
|
||||
+ num-rx-chans = <2>;
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <
|
||||
+ 0xb 0x4 /* TXEOB */
|
||||
+ 0xc 0x4 /* RXEOB */
|
||||
+ 0xa 0x4 /* SERR */
|
||||
+ 0xd 0x4 /* TXDE */
|
||||
+ 0xe 0x4 /* RXDE */>;
|
||||
+ };
|
||||
+
|
||||
+ POB0: opb {
|
||||
+ compatible = "ibm,opb-405ep", "ibm,opb";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ ranges = <0xef600000 0xef600000 0x00a00000>;
|
||||
+ dcr-reg = <0x0a0 0x005>;
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+
|
||||
+ UART: serial@ef600300 {
|
||||
+ device_type = "serial";
|
||||
+ compatible = "ns16550";
|
||||
+ reg = <0xef600300 0x00000008>;
|
||||
+ virtual-reg = <0xef600300>;
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+ current-speed = <115200>;
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <0x0 0x4>;
|
||||
+ };
|
||||
+
|
||||
+ IIC: i2c@ef600500 {
|
||||
+ compatible = "ibm,iic-405ep", "ibm,iic";
|
||||
+ reg = <0xef600500 0x00000011>;
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <0x2 0x4>;
|
||||
+ };
|
||||
+
|
||||
+ GPIO: gpio@ef600700 {
|
||||
+ compatible = "ibm,gpio-405ep";
|
||||
+ reg = <0xef600700 0x00000020>;
|
||||
+ };
|
||||
+
|
||||
+ EMAC: ethernet@ef600800 {
|
||||
+ linux,network-index = <0x0>;
|
||||
+ device_type = "network";
|
||||
+ compatible = "ibm,emac-405ep", "ibm,emac";
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <
|
||||
+ 0xf 0x4 /* Ethernet */
|
||||
+ 0x9 0x4 /* Ethernet Wake Up */>;
|
||||
+ local-mac-address = [000000000000]; /* Filled in by zImage */
|
||||
+ reg = <0xef600800 0x00000070>;
|
||||
+ mal-device = <&MAL>;
|
||||
+ mal-tx-channel = <0>;
|
||||
+ mal-rx-channel = <0>;
|
||||
+ cell-index = <0>;
|
||||
+ max-frame-size = <0x5dc>;
|
||||
+ rx-fifo-size = <0x1000>;
|
||||
+ tx-fifo-size = <0x800>;
|
||||
+ phy-mode = "mii";
|
||||
+ phy-map = <0x00000000>;
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+
|
||||
+ EBC0: ebc {
|
||||
+ compatible = "ibm,ebc-405ep", "ibm,ebc";
|
||||
+ dcr-reg = <0x012 0x002>;
|
||||
+ #address-cells = <2>;
|
||||
+ #size-cells = <1>;
|
||||
+ /* The ranges property is supplied by the bootwrapper
|
||||
+ * and is based on the firmware's configuration of the
|
||||
+ * EBC bridge
|
||||
+ */
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+
|
||||
+ nor_flash@ffc00000 {
|
||||
+ compatible = "cfi-flash";
|
||||
+ bank-width = <2>;
|
||||
+ reg = <0x00000000 0xffc00000 0x00400000>;
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ partition@0 {
|
||||
+ label = "linux";
|
||||
+ reg = <0x0 0x3c0000>;
|
||||
+ };
|
||||
+ partition@100000 {
|
||||
+ label = "rootfs";
|
||||
+ reg = <0x100000 0x2c0000>;
|
||||
+ };
|
||||
+ partition@3c0000 {
|
||||
+ label = "u-boot";
|
||||
+ reg = <0x3c0000 0x30000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ PCI0: pci@ec000000 {
|
||||
+ device_type = "pci";
|
||||
+ #interrupt-cells = <1>;
|
||||
+ #size-cells = <2>;
|
||||
+ #address-cells = <3>;
|
||||
+ compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
|
||||
+ primary;
|
||||
+ reg = <0xeec00000 0x00000008 /* Config space access */
|
||||
+ 0xeed80000 0x00000004 /* IACK */
|
||||
+ 0xeed80000 0x00000004 /* Special cycle */
|
||||
+ 0xef480000 0x00000040>; /* Internal registers */
|
||||
+
|
||||
+ /* Outbound ranges, one memory and one IO,
|
||||
+ * later cannot be changed. Chip supports a second
|
||||
+ * IO range but we don't use it for now
|
||||
+ */
|
||||
+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
|
||||
+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
|
||||
+
|
||||
+ /* Inbound 2GB range starting at 0 */
|
||||
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
|
||||
+
|
||||
+ /* Magicbox v1 has all 4 IRQ pins tied together per slot */
|
||||
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
|
||||
+ interrupt-map = <
|
||||
+ /* IDSEL 1 */
|
||||
+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
|
||||
+
|
||||
+ /* IDSEL 2 */
|
||||
+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
|
||||
+
|
||||
+ /* IDSEL 3 */
|
||||
+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
|
||||
+
|
||||
+ /* IDSEL 4 */
|
||||
+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
|
||||
+ >;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ linux,stdout-path = "/plb/opb/serial@ef600300";
|
||||
+ };
|
||||
+};
|
||||
--- a/arch/powerpc/boot/Makefile
|
||||
+++ b/arch/powerpc/boot/Makefile
|
||||
@@ -75,7 +75,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82
|
||||
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
|
||||
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
|
||||
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
|
||||
- cuboot-acadia.c cuboot-amigaone.c
|
||||
+ cuboot-acadia.c cuboot-amigaone.c cuboot-magicboxv1.c
|
||||
src-boot := $(src-wlib) $(src-plat) empty.c
|
||||
|
||||
src-boot := $(addprefix $(obj)/, $(src-boot))
|
||||
@@ -192,6 +192,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImag
|
||||
image-$(CONFIG_EP405) += dtbImage.ep405
|
||||
image-$(CONFIG_WALNUT) += treeImage.walnut
|
||||
image-$(CONFIG_ACADIA) += cuImage.acadia
|
||||
+image-$(CONFIG_MAGICBOXV1) += cuImage.magicboxv1
|
||||
|
||||
# Board ports in arch/powerpc/platform/44x/Kconfig
|
||||
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
|
||||
--- a/arch/powerpc/platforms/40x/Kconfig
|
||||
+++ b/arch/powerpc/platforms/40x/Kconfig
|
||||
@@ -49,6 +49,16 @@ config KILAUEA
|
||||
help
|
||||
This option enables support for the AMCC PPC405EX evaluation board.
|
||||
|
||||
+config MAGICBOXV1
|
||||
+ bool "Magicbox v1"
|
||||
+ depends on 40x
|
||||
+ default n
|
||||
+ select PPC40x_SIMPLE
|
||||
+ select 405EP
|
||||
+ select PCI
|
||||
+ help
|
||||
+ This option enables support for the Magicbox v1 board.
|
||||
+
|
||||
config MAKALU
|
||||
bool "Makalu"
|
||||
depends on 40x
|
||||
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
|
||||
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
|
||||
@@ -51,7 +51,8 @@ machine_device_initcall(ppc40x_simple, p
|
||||
* board.c file for it rather than adding it to this list.
|
||||
*/
|
||||
static char *board[] __initdata = {
|
||||
- "amcc,acadia"
|
||||
+ "amcc,acadia",
|
||||
+ "magicboxv1"
|
||||
};
|
||||
|
||||
static int __init ppc40x_probe(void)
|
347
target/linux/ppc40x/patches-2.6.30/006-magicboxv2.patch
Normal file
347
target/linux/ppc40x/patches-2.6.30/006-magicboxv2.patch
Normal file
|
@ -0,0 +1,347 @@
|
|||
--- /dev/null
|
||||
+++ b/arch/powerpc/boot/cuboot-magicboxv2.c
|
||||
@@ -0,0 +1,40 @@
|
||||
+/*
|
||||
+ * Old U-boot compatibility for Magicbox v2
|
||||
+ *
|
||||
+ * Author: Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ */
|
||||
+
|
||||
+#include "ops.h"
|
||||
+#include "io.h"
|
||||
+#include "dcr.h"
|
||||
+#include "stdio.h"
|
||||
+#include "4xx.h"
|
||||
+#include "44x.h"
|
||||
+#include "cuboot.h"
|
||||
+
|
||||
+#define TARGET_4xx
|
||||
+#define TARGET_405EP
|
||||
+#include "ppcboot.h"
|
||||
+
|
||||
+static bd_t bd;
|
||||
+
|
||||
+static void magicboxv2_fixups(void)
|
||||
+{
|
||||
+ ibm405ep_fixup_clocks(25000000);
|
||||
+ ibm4xx_sdram_fixup_memsize();
|
||||
+ dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
|
||||
+}
|
||||
+
|
||||
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
||||
+ unsigned long r6, unsigned long r7)
|
||||
+{
|
||||
+ CUBOOT_INIT();
|
||||
+ platform_ops.fixups = magicboxv2_fixups;
|
||||
+ platform_ops.exit = ibm40x_dbcr_reset;
|
||||
+ fdt_init(_dtb_start);
|
||||
+ serial_console_init();
|
||||
+}
|
||||
--- /dev/null
|
||||
+++ b/arch/powerpc/boot/dts/magicboxv2.dts
|
||||
@@ -0,0 +1,250 @@
|
||||
+/*
|
||||
+ * Device Tree Source for Magicbox v2
|
||||
+ *
|
||||
+ * Copyright 2008 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * Based on walnut.dts
|
||||
+ *
|
||||
+ * This file is licensed under the terms of the GNU General Public
|
||||
+ * License version 2. This program is licensed "as is" without
|
||||
+ * any warranty of any kind, whether express or implied.
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+/ {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ model = "magicboxv2";
|
||||
+ compatible = "magicboxv2";
|
||||
+ dcr-parent = <&{/cpus/cpu@0}>;
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &EMAC0;
|
||||
+ ethernet1 = &EMAC1;
|
||||
+ serial0 = &UART0;
|
||||
+ serial1 = &UART1;
|
||||
+ };
|
||||
+
|
||||
+ cpus {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ cpu@0 {
|
||||
+ device_type = "cpu";
|
||||
+ model = "PowerPC,405EP";
|
||||
+ reg = <0x00000000>;
|
||||
+ clock-frequency = <0xbebc200>; /* Filled in by zImage */
|
||||
+ timebase-frequency = <0>; /* Filled in by zImage */
|
||||
+ i-cache-line-size = <20>;
|
||||
+ d-cache-line-size = <20>;
|
||||
+ i-cache-size = <4000>;
|
||||
+ d-cache-size = <4000>;
|
||||
+ dcr-controller;
|
||||
+ dcr-access-method = "native";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ memory {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */
|
||||
+ };
|
||||
+
|
||||
+ UIC0: interrupt-controller {
|
||||
+ compatible = "ibm,uic";
|
||||
+ interrupt-controller;
|
||||
+ cell-index = <0>;
|
||||
+ dcr-reg = <0x0c0 0x009>;
|
||||
+ #address-cells = <0>;
|
||||
+ #size-cells = <0>;
|
||||
+ #interrupt-cells = <2>;
|
||||
+ };
|
||||
+
|
||||
+ plb {
|
||||
+ compatible = "ibm,plb3";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ ranges;
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+
|
||||
+ SDRAM0: memory-controller {
|
||||
+ compatible = "ibm,sdram-405ep";
|
||||
+ dcr-reg = <0x010 0x002>;
|
||||
+ };
|
||||
+
|
||||
+ MAL: mcmal {
|
||||
+ compatible = "ibm,mcmal-405ep", "ibm,mcmal";
|
||||
+ dcr-reg = <0x180 0x062>;
|
||||
+ num-tx-chans = <4>;
|
||||
+ num-rx-chans = <2>;
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <
|
||||
+ 0xb 0x4 /* TXEOB */
|
||||
+ 0xc 0x4 /* RXEOB */
|
||||
+ 0xa 0x4 /* SERR */
|
||||
+ 0xd 0x4 /* TXDE */
|
||||
+ 0xe 0x4 /* RXDE */>;
|
||||
+ };
|
||||
+
|
||||
+ POB0: opb {
|
||||
+ compatible = "ibm,opb-405ep", "ibm,opb";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ ranges = <0xef600000 0xef600000 0x00a00000>;
|
||||
+ dcr-reg = <0x0a0 0x005>;
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+
|
||||
+ UART0: serial@ef600300 {
|
||||
+ device_type = "serial";
|
||||
+ compatible = "ns16550";
|
||||
+ reg = <0xef600300 0x00000008>;
|
||||
+ virtual-reg = <0xef600300>;
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+ current-speed = <115200>;
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <0x0 0x4>;
|
||||
+ };
|
||||
+
|
||||
+ UART1: serial@ef600400 {
|
||||
+ device_type = "serial";
|
||||
+ compatible = "ns16550";
|
||||
+ reg = <0xef600400 0x00000008>;
|
||||
+ virtual-reg = <0xef600400>;
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+ current-speed = <115200>;
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <0x1 0x4>;
|
||||
+ };
|
||||
+
|
||||
+ IIC: i2c@ef600500 {
|
||||
+ compatible = "ibm,iic-405ep", "ibm,iic";
|
||||
+ reg = <0xef600500 0x00000011>;
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <0x2 0x4>;
|
||||
+ };
|
||||
+
|
||||
+ GPIO: gpio@ef600700 {
|
||||
+ compatible = "ibm,gpio-405ep";
|
||||
+ reg = <0xef600700 0x00000020>;
|
||||
+ };
|
||||
+
|
||||
+ EMAC0: ethernet@ef600800 {
|
||||
+ linux,network-index = <0x0>;
|
||||
+ device_type = "network";
|
||||
+ compatible = "ibm,emac-405ep", "ibm,emac";
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <
|
||||
+ 0xf 0x4 /* Ethernet */
|
||||
+ 0x9 0x4 /* Ethernet Wake Up */>;
|
||||
+ local-mac-address = [000000000000]; /* Filled in by zImage */
|
||||
+ reg = <0xef600800 0x00000070>;
|
||||
+ mal-device = <&MAL>;
|
||||
+ mal-tx-channel = <0>;
|
||||
+ mal-rx-channel = <0>;
|
||||
+ cell-index = <0>;
|
||||
+ max-frame-size = <0x5dc>;
|
||||
+ rx-fifo-size = <0x1000>;
|
||||
+ tx-fifo-size = <0x800>;
|
||||
+ phy-mode = "mii";
|
||||
+ phy-map = <0x00000000>;
|
||||
+ };
|
||||
+ EMAC1: ethernet@ef600900 {
|
||||
+ linux,network-index = <0x1>;
|
||||
+ device_type = "network";
|
||||
+ compatible = "ibm,emac-405ep", "ibm,emac";
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <
|
||||
+ 0x11 0x4 /* Ethernet */
|
||||
+ 0x09 0x4 /* Ethernet Wake Up */>;
|
||||
+ local-mac-address = [000000000000]; /* Filled in by zImage */
|
||||
+ reg = <0xef600900 0x00000070>;
|
||||
+ mal-device = <&MAL>;
|
||||
+ mal-tx-channel = <2>;
|
||||
+ mal-rx-channel = <1>;
|
||||
+ cell-index = <1>;
|
||||
+ max-frame-size = <0x5dc>;
|
||||
+ rx-fifo-size = <0x1000>;
|
||||
+ tx-fifo-size = <0x800>;
|
||||
+ mdio-device = <&EMAC0>;
|
||||
+ phy-mode = "mii";
|
||||
+ phy-map = <0x00000001>;
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+
|
||||
+ EBC0: ebc {
|
||||
+ compatible = "ibm,ebc-405ep", "ibm,ebc";
|
||||
+ dcr-reg = <0x012 0x002>;
|
||||
+ #address-cells = <2>;
|
||||
+ #size-cells = <1>;
|
||||
+ /* The ranges property is supplied by the bootwrapper
|
||||
+ * and is based on the firmware's configuration of the
|
||||
+ * EBC bridge
|
||||
+ */
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+
|
||||
+ nor_flash@ffc00000 {
|
||||
+ compatible = "cfi-flash";
|
||||
+ bank-width = <2>;
|
||||
+ reg = <0x00000000 0xffc00000 0x00400000>;
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ partition@0 {
|
||||
+ label = "linux";
|
||||
+ reg = <0x0 0x3c0000>;
|
||||
+ };
|
||||
+ partition@100000 {
|
||||
+ label = "rootfs";
|
||||
+ reg = <0x100000 0x2c0000>;
|
||||
+ };
|
||||
+ partition@3c0000 {
|
||||
+ label = "u-boot";
|
||||
+ reg = <0x3c0000 0x30000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ PCI0: pci@ec000000 {
|
||||
+ device_type = "pci";
|
||||
+ #interrupt-cells = <1>;
|
||||
+ #size-cells = <2>;
|
||||
+ #address-cells = <3>;
|
||||
+ compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
|
||||
+ primary;
|
||||
+ reg = <0xeec00000 0x00000008 /* Config space access */
|
||||
+ 0xeed80000 0x00000004 /* IACK */
|
||||
+ 0xeed80000 0x00000004 /* Special cycle */
|
||||
+ 0xef480000 0x00000040>; /* Internal registers */
|
||||
+
|
||||
+ /* Outbound ranges, one memory and one IO,
|
||||
+ * later cannot be changed. Chip supports a second
|
||||
+ * IO range but we don't use it for now
|
||||
+ */
|
||||
+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
|
||||
+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
|
||||
+
|
||||
+ /* Inbound 2GB range starting at 0 */
|
||||
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
|
||||
+
|
||||
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
|
||||
+ interrupt-map = <
|
||||
+ /* IDSEL 1 */
|
||||
+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
|
||||
+
|
||||
+ /* IDSEL 2 */
|
||||
+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
|
||||
+
|
||||
+ /* IDSEL 3 */
|
||||
+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
|
||||
+
|
||||
+ /* IDSEL 4 */
|
||||
+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
|
||||
+ >;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ linux,stdout-path = "/plb/opb/serial@ef600300";
|
||||
+ };
|
||||
+};
|
||||
--- a/arch/powerpc/boot/Makefile
|
||||
+++ b/arch/powerpc/boot/Makefile
|
||||
@@ -75,7 +75,8 @@ src-plat := of.c cuboot-52xx.c cuboot-82
|
||||
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
|
||||
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
|
||||
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
|
||||
- cuboot-acadia.c cuboot-amigaone.c cuboot-magicboxv1.c
|
||||
+ cuboot-acadia.c cuboot-amigaone.c cuboot-magicboxv1.c \
|
||||
+ cuboot-magicboxv2.c
|
||||
src-boot := $(src-wlib) $(src-plat) empty.c
|
||||
|
||||
src-boot := $(addprefix $(obj)/, $(src-boot))
|
||||
@@ -193,6 +194,7 @@ image-$(CONFIG_EP405) += dtbImage.ep40
|
||||
image-$(CONFIG_WALNUT) += treeImage.walnut
|
||||
image-$(CONFIG_ACADIA) += cuImage.acadia
|
||||
image-$(CONFIG_MAGICBOXV1) += cuImage.magicboxv1
|
||||
+image-$(CONFIG_MAGICBOXV2) += cuImage.magicboxv2
|
||||
|
||||
# Board ports in arch/powerpc/platform/44x/Kconfig
|
||||
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
|
||||
--- a/arch/powerpc/platforms/40x/Kconfig
|
||||
+++ b/arch/powerpc/platforms/40x/Kconfig
|
||||
@@ -59,6 +59,16 @@ config MAGICBOXV1
|
||||
help
|
||||
This option enables support for the Magicbox v1 board.
|
||||
|
||||
+config MAGICBOXV2
|
||||
+ bool "Magicbox v2"
|
||||
+ depends on 40x
|
||||
+ default n
|
||||
+ select PPC40x_SIMPLE
|
||||
+ select 405EP
|
||||
+ select PCI
|
||||
+ help
|
||||
+ This option enables support for the Magicbox v2 board.
|
||||
+
|
||||
config MAKALU
|
||||
bool "Makalu"
|
||||
depends on 40x
|
||||
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
|
||||
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
|
||||
@@ -52,7 +52,8 @@ machine_device_initcall(ppc40x_simple, p
|
||||
*/
|
||||
static char *board[] __initdata = {
|
||||
"amcc,acadia",
|
||||
- "magicboxv1"
|
||||
+ "magicboxv1",
|
||||
+ "magicboxv2",
|
||||
};
|
||||
|
||||
static int __init ppc40x_probe(void)
|
Loading…
Reference in a new issue