ath79: add support for GL-iNet GL-X750
this patch adds supports for GL-X750. Specification: - SOC: QCA9531 (650MHz) - Flash: 16 MiB (W25Q128FVSG) - RAM: 128 MiB DDR2 - Ethernet: 10/100: 1xLAN + 10/100: 1xWAN - Wireless: 2.4GHz (bgn) and 5GHz (ac) - USB: 1x USB 2.0 port - Button: 1x reset button - LED: 5x LEDS (green) Flash instruction: The original firmware is openwrt, so both LuCI or sysupgrade can be used. Signed-off-by: Luo chongjun <luochongjun@gl-inet.com>
This commit is contained in:
parent
987b961537
commit
9989fd5154
6 changed files with 159 additions and 2 deletions
|
@ -33,6 +33,9 @@ etactica,eg200)
|
|||
ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
|
||||
ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore"
|
||||
;;
|
||||
glinet,x750)
|
||||
ucidef_set_led_netdev "wan" "WAN" "gl-x750:green:wan" "eth0"
|
||||
;;
|
||||
netgear,wnr612-v2|\
|
||||
on,n150r)
|
||||
ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
|
||||
|
|
|
@ -1,4 +1,4 @@
|
|||
#!/bin/sh
|
||||
!/bin/sh
|
||||
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
@ -72,7 +72,8 @@ ath79_setup_interfaces()
|
|||
ucidef_set_interface_lan "eth0" "dhcp"
|
||||
;;
|
||||
glinet,ar150|\
|
||||
glinet,ar300m)
|
||||
glinet,ar300m|\
|
||||
glinet,x750)
|
||||
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
||||
;;
|
||||
iodata,etg3-r|\
|
||||
|
|
|
@ -87,6 +87,10 @@ board=$(board_name)
|
|||
case "$FIRMWARE" in
|
||||
"ath10k/cal-pci-0000:00:00.0.bin")
|
||||
case $board in
|
||||
glinet,x750)
|
||||
ath10kcal_extract "art" 20480 2116
|
||||
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
|
||||
;;
|
||||
iodata,wn-ac1167dgr|\
|
||||
iodata,wn-ac1600dgr2)
|
||||
ath10kcal_extract "art" 20480 2116
|
||||
|
|
46
target/linux/ath79/dts/qca9533_glinet_x750.dts
Normal file
46
target/linux/ath79/dts/qca9533_glinet_x750.dts
Normal file
|
@ -0,0 +1,46 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca9533_glinet_x750.dtsi"
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
num-cs = <0>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x040000 0x010000>;
|
||||
};
|
||||
|
||||
art: partition@50000 {
|
||||
label = "art";
|
||||
reg = <0x050000 0x010000>;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
label = "firmware";
|
||||
reg = <0x060000 0xfa0000>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
95
target/linux/ath79/dts/qca9533_glinet_x750.dtsi
Normal file
95
target/linux/ath79/dts/qca9533_glinet_x750.dtsi
Normal file
|
@ -0,0 +1,95 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "qca9533.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "glinet,x750", "qca,qca9533";
|
||||
model = "GL.iNet GL-X750";
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&jtag_disable_pins>;
|
||||
|
||||
button0 {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power {
|
||||
label = "gl-x750:green:power";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "gl-x750:green:wlan2g";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "gl-x750:green:wlan5g";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "gl-x750:green:wan";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
4g {
|
||||
label = "gl-x750:green:4g";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
hub_port: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
mtd-mac-address = <&art 0x0>;
|
||||
phy-handle = <&swphy4>;
|
||||
};
|
||||
|
||||
ð1 {
|
||||
mtd-mac-address = <&art 0x6>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
mtd-mac-address = <&art 0x1002>;
|
||||
};
|
|
@ -176,6 +176,14 @@ define Device/glinet_ar300m_nor
|
|||
endef
|
||||
TARGET_DEVICES += glinet_ar300m_nor
|
||||
|
||||
define Device/glinet_x750
|
||||
ATH_SOC := qca9533
|
||||
DEVICE_TITLE := GL.iNet GL-ARX750
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9887
|
||||
IMAGE_SIZE := 16000k
|
||||
endef
|
||||
TARGET_DEVICES += glinet_x750
|
||||
|
||||
define Device/iodata_etg3-r
|
||||
ATH_SOC := ar9342
|
||||
DEVICE_TITLE := I-O DATA ETG3-R
|
||||
|
|
Loading…
Reference in a new issue