ar71xx: migrate tplink cpe510 to new build steps

cpe510: Tested sysupgrade and initramfs.
Untested: webIf w/ factory.bin & recovery.bin

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49081
This commit is contained in:
John Crispin 2016-03-23 12:52:50 +00:00
parent e0a3a84521
commit 98a01048b8

View file

@ -73,6 +73,18 @@ define Build/mktplinkfw-initramfs
@mv $@.new $@
endef
define Build/tplink-safeloader
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(TPLINK_BOARD_NAME) \
-V $(REVISION) \
-k $(word 1,$^) \
-r $@ \
-o $@.new \
$2 \
-j \
$(if $(findstring sysupgrade,$1),-S) && mv $@.new $@ || rm -f $@
endef
define Build/loader-common
rm -rf $@.src
$(MAKE) -C lzma-loader \
@ -107,7 +119,7 @@ define Build/copy-file
cat "$(1)" > "$@"
endef
DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION
DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION TPLINK_BOARD_NAME
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
@ -315,6 +327,19 @@ $(Device/tplink)
IMAGE_SIZE := 15872k
endef
define Device/cpe210-220-510-520
MTDPARTS := spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
IMAGE_SIZE := 7680k
BOARDNAME := CPE510
TPLINK_BOARD_NAME := CPE510
LOADER_TYPE := elf
KERNEL := kernel-bin | patch-cmdline | lzma | loader-kernel
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
endef
TARGET_DEVICES += cpe210-220-510-520
define Device/tl-wdr4300-v1
$(Device/tplink-8mlzma)
BOARDNAME = TL-WDR4300
@ -1512,28 +1537,6 @@ define Image/BuildLoader
-$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)
endef
#
# Embed patched lzma-compressed kernel inside lzma-loader.
#
# Specifying the command line via the lzma-loader doesn't work with some
# models (like the TP-LINK CPE series), so this version first patches the
# command line in the image and then builds the loader around it.
#
# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
# $(2), suffix of target file to build, e.g. bin, gz, elf
# $(3), kernel command line to pass from lzma-loader to kernel
# $(4), unused here
# $(5), suffix of kernel filename, e.g. -initramfs, or empty
define Image/BuildLoaderPatched
$(call PatchKernelLzma,$(1),$(3))
-rm -rf $(KDIR)/lzma-loader
$(LOADER_MAKE) LOADER=loader-$(1).$(2) \
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
LOADER_DATA="$(KDIR_TMP)/vmlinux-$(1)$(5).bin.lzma" BOARD="$(1)" \
compile loader.$(2)
-$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)
endef
#
# Build lzma-loader alone which will search for lzma-compressed kernel identified by
# uImage header with magic "OKLI" at boot time.
@ -1583,7 +1586,6 @@ cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmwa
cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)
cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
@ -2041,28 +2043,6 @@ define Image/Build/Senao
$(call sysupname,$(1),$(2))
endef
Image/Build/TPLINK-SAFELOADER/loader = $(call Image/BuildLoaderPatched,$(1),elf,$(2) $(3))
define Image/Build/TPLINK-SAFELOADER
[ -e "$(KDIR)/loader-$(2).elf" ]
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(5) \
-k $(KDIR)/loader-$(2).elf \
-r $(KDIR)/root.$(1) \
-V $(REVISION) \
-j \
-o $(call factoryname,$(1),$(2))
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(5) \
-k $(KDIR)/loader-$(2).elf \
-r $(KDIR)/root.$(1) \
-V $(REVISION) \
-j -S \
-o $(call sysupname,$(1),$(2))
endef
define Image/Build/CyberTAN
echo -n '' > $(KDIR_TMP)/empty.bin
$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
@ -2503,8 +2483,6 @@ $(eval $(call SingleProfile,Seama,64k,QIHOO360,qihoo-c301,QIHOO-C301,ttyS0,11520
$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN))