kirkwood: switch to kernel 4.9
Add patches-4.9, some of them (heavily) rewritten: - ea4500 is upstream available, keep only LEDE changes in dts - ea3500 is changed to match the structure of the upstream ea4500 dts - nsa310s rewritten to include the common dtsi - nsa325 is dropped, since already upstream Signed-off-by: Paul Wassi <p.wassi@gmx.at> Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> [refresh kernel config, add on100, use the switchdev based mv88e6171 driver for the linksys boards, keep lede specific rootfs/kernel partition names for linksys boards, reorder patches] Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Paul Wassi
Mathias Kresin
parent
08c499f865
commit
9808b9ae02
18 changed files with 1648 additions and 3 deletions
|
|
@ -3857,6 +3857,7 @@ CONFIG_SELECT_MEMORY_MODEL=y
|
|||
# CONFIG_SENSORS_NCT6775 is not set
|
||||
# CONFIG_SENSORS_NCT7802 is not set
|
||||
# CONFIG_SENSORS_NCT7904 is not set
|
||||
# CONFIG_SENSORS_NSA320 is not set
|
||||
# CONFIG_SENSORS_NTC_THERMISTOR is not set
|
||||
# CONFIG_SENSORS_PC87360 is not set
|
||||
# CONFIG_SENSORS_PC87427 is not set
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@ FEATURES:=usb nand squashfs ramdisk
|
|||
CPU_TYPE:=xscale
|
||||
MAINTAINER:=Luka Perkov <luka@openwrt.org>
|
||||
|
||||
KERNEL_PATCHVER:=4.4
|
||||
KERNEL_PATCHVER:=4.9
|
||||
|
||||
include $(INCLUDE_DIR)/target.mk
|
||||
|
||||
|
|
|
|||
|
|
@ -41,11 +41,11 @@ kirkwood_board_detect() {
|
|||
name="pogo_e02"
|
||||
;;
|
||||
|
||||
"Linksys EA3500")
|
||||
"Linksys Audi (EA3500)")
|
||||
name="linksys-audi"
|
||||
;;
|
||||
|
||||
"Linksys E4200v2 / EA4500")
|
||||
"Linksys Viper (E4200v2 / EA4500)")
|
||||
name="linksys-viper"
|
||||
;;
|
||||
|
||||
|
|
|
|||
333
target/linux/kirkwood/config-4.9
Normal file
333
target/linux/kirkwood/config-4.9
Normal file
|
|
@ -0,0 +1,333 @@
|
|||
CONFIG_ALIGNMENT_TRAP=y
|
||||
CONFIG_ARCH_CLOCKSOURCE_DATA=y
|
||||
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
|
||||
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
|
||||
CONFIG_ARCH_HAS_SG_CHAIN=y
|
||||
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
|
||||
CONFIG_ARCH_MULTIPLATFORM=y
|
||||
CONFIG_ARCH_MULTI_CPU_AUTO=y
|
||||
# CONFIG_ARCH_MULTI_V4 is not set
|
||||
# CONFIG_ARCH_MULTI_V4T is not set
|
||||
CONFIG_ARCH_MULTI_V4_V5=y
|
||||
CONFIG_ARCH_MULTI_V5=y
|
||||
CONFIG_ARCH_MVEBU=y
|
||||
CONFIG_ARCH_NR_GPIO=0
|
||||
# CONFIG_ARCH_OXNAS is not set
|
||||
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
|
||||
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
|
||||
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
|
||||
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
|
||||
CONFIG_ARCH_SUPPORTS_UPROBES=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
|
||||
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
|
||||
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
|
||||
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
|
||||
CONFIG_ARCH_WANT_LIBATA_LEDS=y
|
||||
CONFIG_ARM=y
|
||||
# CONFIG_ARMADA_THERMAL is not set
|
||||
CONFIG_ARM_APPENDED_DTB=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT=y
|
||||
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
|
||||
# CONFIG_ARM_CPU_SUSPEND is not set
|
||||
CONFIG_ARM_HAS_SG_CHAIN=y
|
||||
# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
|
||||
CONFIG_ARM_L1_CACHE_SHIFT=5
|
||||
# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
|
||||
CONFIG_ARM_PATCH_PHYS_VIRT=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_ATA=y
|
||||
CONFIG_ATAGS=y
|
||||
CONFIG_ATA_LEDS=y
|
||||
CONFIG_AUTO_ZRELADDR=y
|
||||
# CONFIG_BINFMT_FLAT is not set
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_BLK_MQ_PCI=y
|
||||
CONFIG_CACHE_FEROCEON_L2=y
|
||||
# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
|
||||
# CONFIG_CACHE_L2X0 is not set
|
||||
CONFIG_CLKDEV_LOOKUP=y
|
||||
CONFIG_CLKSRC_MMIO=y
|
||||
CONFIG_CLKSRC_OF=y
|
||||
CONFIG_CLKSRC_PROBE=y
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_COMMON_CLK=y
|
||||
CONFIG_CPU_32v5=y
|
||||
CONFIG_CPU_ABRT_EV5T=y
|
||||
# CONFIG_CPU_BIG_ENDIAN is not set
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_COPY_FEROCEON=y
|
||||
CONFIG_CPU_CP15=y
|
||||
CONFIG_CPU_CP15_MMU=y
|
||||
CONFIG_CPU_FEROCEON=y
|
||||
# CONFIG_CPU_FEROCEON_OLD_ID is not set
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_CPU_IDLE_GOV_LADDER=y
|
||||
CONFIG_CPU_PABRT_LEGACY=y
|
||||
CONFIG_CPU_PM=y
|
||||
CONFIG_CPU_TLB_FEROCEON=y
|
||||
CONFIG_CPU_USE_DOMAINS=y
|
||||
CONFIG_CRC16=y
|
||||
# CONFIG_CRC32_SARWATE is not set
|
||||
CONFIG_CRC32_SLICEBY8=y
|
||||
CONFIG_CRYPTO_CRC32C=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_DES=y
|
||||
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
|
||||
CONFIG_CRYPTO_HASH=y
|
||||
CONFIG_CRYPTO_HASH2=y
|
||||
CONFIG_CRYPTO_HW=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_WORKQUEUE=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
|
||||
CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y
|
||||
# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
|
||||
CONFIG_DEBUG_UART_8250=y
|
||||
# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
|
||||
CONFIG_DEBUG_UART_8250_SHIFT=2
|
||||
# CONFIG_DEBUG_UART_8250_WORD is not set
|
||||
CONFIG_DEBUG_UART_PHYS=0xf1012000
|
||||
CONFIG_DEBUG_UART_VIRT=0xfed12000
|
||||
CONFIG_DEBUG_UNCOMPRESS=y
|
||||
# CONFIG_DEBUG_USER is not set
|
||||
# CONFIG_DLCI is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
CONFIG_DTC=y
|
||||
# CONFIG_EARLY_PRINTK is not set
|
||||
CONFIG_EDAC_ATOMIC_SCRUB=y
|
||||
CONFIG_EDAC_SUPPORT=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FIX_EARLYCON_MEM=y
|
||||
CONFIG_FRAME_POINTER=y
|
||||
CONFIG_FS_MBCACHE=y
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_EARLY_IOREMAP=y
|
||||
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
||||
CONFIG_GENERIC_IO=y
|
||||
CONFIG_GENERIC_IRQ_CHIP=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_PHY=y
|
||||
CONFIG_GENERIC_SCHED_CLOCK=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||
CONFIG_GENERIC_STRNLEN_USER=y
|
||||
CONFIG_GLOB=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_MVEBU=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HANDLE_DOMAIN_IRQ=y
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT_MAP=y
|
||||
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
|
||||
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
|
||||
# CONFIG_HAVE_ARCH_BITREVERSE is not set
|
||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_ARCH_PFN_VALID=y
|
||||
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
|
||||
CONFIG_HAVE_ARCH_TRACEHOOK=y
|
||||
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
|
||||
CONFIG_HAVE_CBPF_JIT=y
|
||||
CONFIG_HAVE_CC_STACKPROTECTOR=y
|
||||
CONFIG_HAVE_CLK=y
|
||||
CONFIG_HAVE_CLK_PREPARE=y
|
||||
CONFIG_HAVE_CONTEXT_TRACKING=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DEBUG_KMEMLEAK=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_CONTIGUOUS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
|
||||
CONFIG_HAVE_MEMBLOCK=y
|
||||
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
|
||||
CONFIG_HAVE_NET_DSA=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_OPTPROBES=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HAVE_PERF_REGS=y
|
||||
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
|
||||
CONFIG_HAVE_PROC_CPU=y
|
||||
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
|
||||
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
|
||||
CONFIG_HAVE_UID16=y
|
||||
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HZ_FIXED=0
|
||||
CONFIG_HZ_PERIODIC=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_MV64XXX=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IOMMU_HELPER=y
|
||||
CONFIG_IP_PIMSM_V1=y
|
||||
CONFIG_IP_PIMSM_V2=y
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
CONFIG_JBD2=y
|
||||
CONFIG_KIRKWOOD_CLK=y
|
||||
CONFIG_KIRKWOOD_THERMAL=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_NETXBIG=y
|
||||
CONFIG_LEDS_NS2=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MACH_KIRKWOOD=y
|
||||
CONFIG_MACH_MVEBU_ANY=y
|
||||
CONFIG_MANGLE_BOOTARGS=y
|
||||
CONFIG_MDIO_BOARDINFO=y
|
||||
# CONFIG_MFD_MAX77620 is not set
|
||||
CONFIG_MIGHT_HAVE_PCI=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
CONFIG_MMC_MVSDIO=y
|
||||
# CONFIG_MMC_TIFM_SD is not set
|
||||
CONFIG_MODULES_USE_ELF_REL=y
|
||||
# CONFIG_MTD_CFI is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_ORION=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
# CONFIG_MTD_UBI_FASTMAP is not set
|
||||
# CONFIG_MTD_UBI_GLUEBI is not set
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
CONFIG_MULTI_IRQ_HANDLER=y
|
||||
CONFIG_MV643XX_ETH=y
|
||||
CONFIG_MVEBU_CLK_COMMON=y
|
||||
CONFIG_MVEBU_MBUS=y
|
||||
CONFIG_MVMDIO=y
|
||||
# CONFIG_MVNETA is not set
|
||||
CONFIG_MVSW61XX_PHY=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_KUSER_HELPERS=y
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NO_BOOTMEM=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_ADDRESS_PCI=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OF_NET=y
|
||||
CONFIG_OF_PCI=y
|
||||
CONFIG_OF_PCI_IRQ=y
|
||||
CONFIG_OF_RESERVED_MEM=y
|
||||
CONFIG_OLD_SIGACTION=y
|
||||
CONFIG_OLD_SIGSUSPEND3=y
|
||||
CONFIG_ORION_IRQCHIP=y
|
||||
CONFIG_ORION_TIMER=y
|
||||
CONFIG_ORION_WATCHDOG=y
|
||||
CONFIG_OUTER_CACHE=y
|
||||
CONFIG_PAGE_OFFSET=0xC0000000
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_DOMAINS_GENERIC=y
|
||||
CONFIG_PCI_MVEBU=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PGTABLE_LEVELS=2
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHY_MVEBU_SATA=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_KIRKWOOD=y
|
||||
CONFIG_PINCTRL_MVEBU=y
|
||||
# CONFIG_PINCTRL_SINGLE is not set
|
||||
CONFIG_PLAT_ORION=y
|
||||
CONFIG_POWER_RESET=y
|
||||
# CONFIG_POWER_RESET_BRCMKONA is not set
|
||||
CONFIG_POWER_RESET_GPIO=y
|
||||
# CONFIG_POWER_RESET_QNAP is not set
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_RATIONAL=y
|
||||
# CONFIG_RCU_STALL_COMMON is not set
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_I2C=y
|
||||
CONFIG_REGMAP_SPI=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_MV=y
|
||||
CONFIG_RTC_I2C_AND_SPI=y
|
||||
CONFIG_RTC_MC146818_LIB=y
|
||||
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||
CONFIG_SATA_MV=y
|
||||
# CONFIG_SCHED_INFO is not set
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
|
||||
CONFIG_SERIAL_8250_FSL=y
|
||||
# CONFIG_SERIAL_MVEBU_UART is not set
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
CONFIG_SG_POOL=y
|
||||
CONFIG_SOC_BUS=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_ORION=y
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=999999
|
||||
CONFIG_SRAM=y
|
||||
CONFIG_SRCU=y
|
||||
CONFIG_SWCONFIG=y
|
||||
CONFIG_SWIOTLB=y
|
||||
CONFIG_SWPHY=y
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_OF=y
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_UBIFS_FS_LZO=y
|
||||
CONFIG_UBIFS_FS_ZLIB=y
|
||||
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_COMMON=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_HCD_ORION=y
|
||||
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
|
||||
CONFIG_USB_EHCI_PCI=y
|
||||
CONFIG_USB_LED_TRIG=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
# CONFIG_USB_UHCI_HCD is not set
|
||||
CONFIG_USE_OF=y
|
||||
CONFIG_VECTORS_BASE=0xffff0000
|
||||
# CONFIG_VFP is not set
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_WAN=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
CONFIG_XZ_DEC_ARM=y
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
21
target/linux/kirkwood/patches-4.9/100-ib62x0.patch
Normal file
21
target/linux/kirkwood/patches-4.9/100-ib62x0.patch
Normal file
|
|
@ -0,0 +1,21 @@
|
|||
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
|
||||
@@ -117,13 +117,13 @@
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
- label = "uImage";
|
||||
- reg = <0x0100000 0x600000>;
|
||||
+ label = "second stage u-boot";
|
||||
+ reg = <0x100000 0x200000>;
|
||||
};
|
||||
|
||||
- partition@700000 {
|
||||
- label = "root";
|
||||
- reg = <0x0700000 0xf900000>;
|
||||
+ partition@200000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x200000 0xfe00000>;
|
||||
};
|
||||
|
||||
};
|
||||
41
target/linux/kirkwood/patches-4.9/101-iconnect.patch
Normal file
41
target/linux/kirkwood/patches-4.9/101-iconnect.patch
Normal file
|
|
@ -0,0 +1,41 @@
|
|||
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
|
||||
@@ -145,28 +145,23 @@
|
||||
status = "okay";
|
||||
|
||||
partition@0 {
|
||||
- label = "uboot";
|
||||
- reg = <0x0000000 0xc0000>;
|
||||
+ label = "u-boot";
|
||||
+ reg = <0x0000000 0xe0000>;
|
||||
};
|
||||
|
||||
- partition@a0000 {
|
||||
- label = "env";
|
||||
- reg = <0xa0000 0x20000>;
|
||||
+ partition@e0000 {
|
||||
+ label = "u-boot environment";
|
||||
+ reg = <0xe0000 0x100000>;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
- label = "zImage";
|
||||
- reg = <0x100000 0x300000>;
|
||||
+ label = "second stage u-boot";
|
||||
+ reg = <0x100000 0x200000>;
|
||||
};
|
||||
|
||||
- partition@540000 {
|
||||
- label = "initrd";
|
||||
- reg = <0x540000 0x300000>;
|
||||
- };
|
||||
-
|
||||
- partition@980000 {
|
||||
- label = "boot";
|
||||
- reg = <0x980000 0x1f400000>;
|
||||
+ partition@200000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x200000 0x1fe00000>;
|
||||
};
|
||||
};
|
||||
|
||||
32
target/linux/kirkwood/patches-4.9/102-dockstar.patch
Normal file
32
target/linux/kirkwood/patches-4.9/102-dockstar.patch
Normal file
|
|
@ -0,0 +1,32 @@
|
|||
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
|
||||
@@ -77,18 +77,22 @@
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
- reg = <0x0000000 0x100000>;
|
||||
- read-only;
|
||||
+ reg = <0x0000000 0xe0000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@e0000 {
|
||||
+ label = "u-boot environment";
|
||||
+ reg = <0xe0000 0x100000>;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
- label = "uImage";
|
||||
- reg = <0x0100000 0x400000>;
|
||||
+ label = "second stage u-boot";
|
||||
+ reg = <0x100000 0x200000>;
|
||||
};
|
||||
|
||||
- partition@500000 {
|
||||
- label = "data";
|
||||
- reg = <0x0500000 0xfb00000>;
|
||||
+ partition@200000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x200000 0xfe00000>;
|
||||
};
|
||||
};
|
||||
|
||||
258
target/linux/kirkwood/patches-4.9/104-ea3500.patch
Normal file
258
target/linux/kirkwood/patches-4.9/104-ea3500.patch
Normal file
|
|
@ -0,0 +1,258 @@
|
|||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -220,6 +220,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
|
||||
kirkwood-linkstation-lswsxl.dtb \
|
||||
kirkwood-linkstation-lswvl.dtb \
|
||||
kirkwood-linkstation-lswxl.dtb \
|
||||
+ kirkwood-linksys-audi.dtb \
|
||||
kirkwood-linksys-viper.dtb \
|
||||
kirkwood-lschlv2.dtb \
|
||||
kirkwood-lsxhl.dtb \
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
|
||||
@@ -0,0 +1,245 @@
|
||||
+/*
|
||||
+ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
|
||||
+ *
|
||||
+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
|
||||
+ * (c) 2013 Deutsche Telekom Innovation Laboratories
|
||||
+ * (c) 2014 Luka Perkov <luka@openwrt.org>
|
||||
+ * (c) 2014 Dan Walters <dan@walters.io>
|
||||
+ *
|
||||
+ * This file is licensed under the terms of the GNU General Public
|
||||
+ * License version 2. This program is licensed "as is" without any
|
||||
+ * warranty of any kind, whether express or implied.
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "kirkwood.dtsi"
|
||||
+#include "kirkwood-6282.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "Linksys Audi (EA3500)";
|
||||
+ compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
|
||||
+
|
||||
+ memory {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x00000000 0x4000000>;
|
||||
+ };
|
||||
+
|
||||
+ aliases {
|
||||
+ serial0 = &uart0;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ stdout-path = "serial0:115200n8";
|
||||
+ };
|
||||
+
|
||||
+ gpio_keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
|
||||
+ pinctrl-names = "default";
|
||||
+
|
||||
+ wps {
|
||||
+ label = "WPS Button";
|
||||
+ linux,code = <KEY_WPS_BUTTON>;
|
||||
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ reset {
|
||||
+ label = "Reset Button";
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio-leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+ pinctrl-0 = < &pmx_led_green_power >;
|
||||
+ pinctrl-names = "default";
|
||||
+
|
||||
+ green-power {
|
||||
+ label = "audi:green:power";
|
||||
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ mvsw61xx {
|
||||
+ compatible = "marvell,88e6171";
|
||||
+ status = "okay";
|
||||
+ reg = <0x10>;
|
||||
+
|
||||
+ mii-bus = <&mdio>;
|
||||
+ cpu-port-0 = <5>;
|
||||
+ cpu-port-1 = <6>;
|
||||
+ is-indirect;
|
||||
+ };
|
||||
+
|
||||
+ dsa {
|
||||
+ compatible = "marvell,dsa";
|
||||
+ #address-cells = <2>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ dsa,ethernet = <ð0port>;
|
||||
+ dsa,mii-bus = <&mdio>;
|
||||
+
|
||||
+ switch@16,0 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <16 0>; /* MDIO address 16, switch 0 in tree */
|
||||
+
|
||||
+ port@0 {
|
||||
+ reg = <0>;
|
||||
+ label = "ethernet1";
|
||||
+ };
|
||||
+
|
||||
+ port@1 {
|
||||
+ reg = <1>;
|
||||
+ label = "ethernet2";
|
||||
+ };
|
||||
+
|
||||
+ port@2 {
|
||||
+ reg = <2>;
|
||||
+ label = "ethernet3";
|
||||
+ };
|
||||
+
|
||||
+ port@3 {
|
||||
+ reg = <3>;
|
||||
+ label = "ethernet4";
|
||||
+ };
|
||||
+
|
||||
+ port@4 {
|
||||
+ reg = <4>;
|
||||
+ label = "internet";
|
||||
+ };
|
||||
+
|
||||
+ port@5 {
|
||||
+ reg = <5>;
|
||||
+ label = "cpu";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pinctrl {
|
||||
+ pmx_led_green_power: pmx-led-green-power {
|
||||
+ marvell,pins = "mpp7";
|
||||
+ marvell,function = "gpo";
|
||||
+ };
|
||||
+ pmx_btn_wps: pmx-btn-wps {
|
||||
+ marvell,pins = "mpp47";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+ pmx_btn_reset: pmx-btn-reset {
|
||||
+ marvell,pins = "mpp48";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&nand {
|
||||
+ status = "okay";
|
||||
+ pinctrl-0 = <&pmx_nand>;
|
||||
+ pinctrl-names = "default";
|
||||
+
|
||||
+ partitions {
|
||||
+ compatible = "fixed-partitions";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+
|
||||
+ partition@0 {
|
||||
+ label = "u-boot";
|
||||
+ reg = <0x0 0x80000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@80000 {
|
||||
+ label = "u_env";
|
||||
+ reg = <0x80000 0x4000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@84000 {
|
||||
+ label = "s_env";
|
||||
+ reg = <0x84000 0x4000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@200000 {
|
||||
+ label = "kernel1";
|
||||
+ reg = <0x200000 0x290000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@490000 {
|
||||
+ label = "rootfs1";
|
||||
+ reg = <0x490000 0x1170000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@1600000 {
|
||||
+ label = "kernel2";
|
||||
+ reg = <0x1600000 0x290000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@1890000 {
|
||||
+ label = "rootfs2";
|
||||
+ reg = <0x1890000 0x1170000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@2a00000 {
|
||||
+ label = "syscfg";
|
||||
+ reg = <0x2a00000 0x1600000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@88000 {
|
||||
+ label = "unused";
|
||||
+ reg = <0x88000 0x178000>;
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pciec {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pcie0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pcie1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mdio {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
|
||||
+ * fixed speed and duplex.
|
||||
+ */
|
||||
+ð0 {
|
||||
+ status = "okay";
|
||||
+ ethernet0-port@0 {
|
||||
+ speed = <1000>;
|
||||
+ duplex = <1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+/* eth1 is connected to the switch at port 6. However DSA only supports a
|
||||
+ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
|
||||
+ */
|
||||
+ð1 {
|
||||
+ status = "okay";
|
||||
+ ethernet1-port@0 {
|
||||
+ speed = <1000>;
|
||||
+ duplex = <1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+/* There is no battery on the board, so the RTC does not keep
|
||||
+ * time when there is no power, making it useless.
|
||||
+ */
|
||||
+&rtc {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
64
target/linux/kirkwood/patches-4.9/105-ea4500.patch
Normal file
64
target/linux/kirkwood/patches-4.9/105-ea4500.patch
Normal file
|
|
@ -0,0 +1,64 @@
|
|||
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
|
||||
@@ -69,6 +69,17 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ mvsw61xx {
|
||||
+ compatible = "marvell,88e6171";
|
||||
+ status = "okay";
|
||||
+ reg = <0x10>;
|
||||
+
|
||||
+ mii-bus = <&mdio>;
|
||||
+ cpu-port-0 = <5>;
|
||||
+ cpu-port-1 = <6>;
|
||||
+ is-indirect;
|
||||
+ };
|
||||
+
|
||||
dsa {
|
||||
compatible = "marvell,dsa";
|
||||
#address-cells = <2>;
|
||||
@@ -161,22 +172,22 @@
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
- label = "kernel";
|
||||
+ label = "kernel1";
|
||||
reg = <0x200000 0x2A0000>;
|
||||
};
|
||||
|
||||
partition@4A0000 {
|
||||
- label = "rootfs";
|
||||
+ label = "rootfs1";
|
||||
reg = <0x4A0000 0x1760000>;
|
||||
};
|
||||
|
||||
partition@1C00000 {
|
||||
- label = "alt_kernel";
|
||||
+ label = "kernel2";
|
||||
reg = <0x1C00000 0x2A0000>;
|
||||
};
|
||||
|
||||
partition@1EA0000 {
|
||||
- label = "alt_rootfs";
|
||||
+ label = "rootfs2";
|
||||
reg = <0x1EA0000 0x1760000>;
|
||||
};
|
||||
|
||||
@@ -225,10 +236,14 @@
|
||||
};
|
||||
|
||||
/* eth1 is connected to the switch at port 6. However DSA only supports a
|
||||
- * single CPU port. So leave this port disabled to avoid confusion.
|
||||
+ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
|
||||
*/
|
||||
ð1 {
|
||||
- status = "disabled";
|
||||
+ status = "okay";
|
||||
+ ethernet1-port@0 {
|
||||
+ speed = <1000>;
|
||||
+ duplex = <1>;
|
||||
+ };
|
||||
};
|
||||
|
||||
/* There is no battery on the board, so the RTC does not keep
|
||||
130
target/linux/kirkwood/patches-4.9/105-goflexhome.patch
Normal file
130
target/linux/kirkwood/patches-4.9/105-goflexhome.patch
Normal file
|
|
@ -0,0 +1,130 @@
|
|||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -207,6 +207,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
|
||||
kirkwood-ds411.dtb \
|
||||
kirkwood-ds411j.dtb \
|
||||
kirkwood-ds411slim.dtb \
|
||||
+ kirkwood-goflexhome.dtb \
|
||||
kirkwood-goflexnet.dtb \
|
||||
kirkwood-guruplug-server-plus.dtb \
|
||||
kirkwood-ib62x0.dtb \
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
|
||||
@@ -0,0 +1,117 @@
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "kirkwood.dtsi"
|
||||
+#include "kirkwood-6281.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "Seagate GoFlex Home";
|
||||
+ compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
+
|
||||
+ memory {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x00000000 0x8000000>;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
|
||||
+ stdout-path = &uart0;
|
||||
+ };
|
||||
+
|
||||
+ ocp@f1000000 {
|
||||
+ pinctrl: pin-controller@10000 {
|
||||
+ pmx_usb_power_enable: pmx-usb-power-enable {
|
||||
+ marvell,pins = "mpp29";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+ pmx_led_white: pmx-led-white {
|
||||
+ marvell,pins = "mpp40";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+ pmx_led_green: pmx-led_green {
|
||||
+ marvell,pins = "mpp46";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+ pmx_led_orange: pmx-led-orange {
|
||||
+ marvell,pins = "mpp47";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+ };
|
||||
+ serial@12000 {
|
||||
+ status = "ok";
|
||||
+ };
|
||||
+
|
||||
+ sata@80000 {
|
||||
+ status = "okay";
|
||||
+ nr-ports = <2>;
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+ gpio-leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ health {
|
||||
+ label = "status:green:health";
|
||||
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "default-on";
|
||||
+ };
|
||||
+ fault {
|
||||
+ label = "status:orange:fault";
|
||||
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ misc {
|
||||
+ label = "status:white:misc";
|
||||
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "disk-activity";
|
||||
+ };
|
||||
+ };
|
||||
+ regulators {
|
||||
+ compatible = "simple-bus";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ pinctrl-0 = <&pmx_usb_power_enable>;
|
||||
+ pinctrl-names = "default";
|
||||
+
|
||||
+ usb_power: regulator@1 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ reg = <1>;
|
||||
+ regulator-name = "USB Power";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ enable-active-high;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&nand {
|
||||
+ chip-delay = <40>;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ partition@0 {
|
||||
+ label = "u-boot";
|
||||
+ reg = <0x0000000 0x100000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@100000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x100000 0x0ff00000>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&mdio {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ ethphy0: ethernet-phy@0 {
|
||||
+ reg = <0>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+ð0 {
|
||||
+ status = "okay";
|
||||
+ ethernet0-port@0 {
|
||||
+ phy-handle = <ðphy0>;
|
||||
+ };
|
||||
+};
|
||||
23
target/linux/kirkwood/patches-4.9/106-goflexnet.patch
Normal file
23
target/linux/kirkwood/patches-4.9/106-goflexnet.patch
Normal file
|
|
@ -0,0 +1,23 @@
|
|||
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
|
||||
@@ -158,18 +158,8 @@
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
- label = "uImage";
|
||||
- reg = <0x0100000 0x400000>;
|
||||
- };
|
||||
-
|
||||
- partition@500000 {
|
||||
- label = "pogoplug";
|
||||
- reg = <0x0500000 0x2000000>;
|
||||
- };
|
||||
-
|
||||
- partition@2500000 {
|
||||
- label = "root";
|
||||
- reg = <0x02500000 0xd800000>;
|
||||
+ label = "ubi";
|
||||
+ reg = <0x0100000 0x0ff00000>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,48 @@
|
|||
--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
|
||||
+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
|
||||
@@ -111,40 +111,16 @@
|
||||
|
||||
partition@0 {
|
||||
label = "uboot";
|
||||
- reg = <0x0000000 0x0100000>;
|
||||
+ reg = <0x0000000 0x00c0000>;
|
||||
read-only;
|
||||
};
|
||||
partition@100000 {
|
||||
label = "uboot_env";
|
||||
- reg = <0x0100000 0x0080000>;
|
||||
+ reg = <0x00c0000 0x0080000>;
|
||||
};
|
||||
- partition@180000 {
|
||||
- label = "key_store";
|
||||
- reg = <0x0180000 0x0080000>;
|
||||
- };
|
||||
- partition@200000 {
|
||||
- label = "info";
|
||||
- reg = <0x0200000 0x0080000>;
|
||||
- };
|
||||
- partition@280000 {
|
||||
- label = "etc";
|
||||
- reg = <0x0280000 0x0a00000>;
|
||||
- };
|
||||
- partition@c80000 {
|
||||
- label = "kernel_1";
|
||||
- reg = <0x0c80000 0x0a00000>;
|
||||
- };
|
||||
- partition@1680000 {
|
||||
- label = "rootfs1";
|
||||
- reg = <0x1680000 0x2fc0000>;
|
||||
- };
|
||||
- partition@4640000 {
|
||||
- label = "kernel_2";
|
||||
- reg = <0x4640000 0x0a00000>;
|
||||
- };
|
||||
- partition@5040000 {
|
||||
- label = "rootfs2";
|
||||
- reg = <0x5040000 0x2fc0000>;
|
||||
+ partition@140000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x0140000 0x7ec0000>;
|
||||
};
|
||||
};
|
||||
|
||||
147
target/linux/kirkwood/patches-4.9/107-02-nsa310b.patch
Normal file
147
target/linux/kirkwood/patches-4.9/107-02-nsa310b.patch
Normal file
|
|
@ -0,0 +1,147 @@
|
|||
kirkwood: add nsa310b dtb, a zyxel nsa310 variant
|
||||
|
||||
add support to a nsa310 variant with red/green usb led
|
||||
and lm85 temp/fan controller
|
||||
|
||||
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
|
||||
|
||||
NOTE: this patch can be upstreamed as-is, LEDE-specific
|
||||
nand partitions are set in another patch
|
||||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -238,6 +238,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
|
||||
kirkwood-ns2mini.dtb \
|
||||
kirkwood-nsa310.dtb \
|
||||
kirkwood-nsa310a.dtb \
|
||||
+ kirkwood-nsa310b.dtb \
|
||||
kirkwood-nsa320.dtb \
|
||||
kirkwood-nsa325.dtb \
|
||||
kirkwood-openblocks_a6.dtb \
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts
|
||||
@@ -0,0 +1,124 @@
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "kirkwood-nsa3x0-common.dtsi"
|
||||
+
|
||||
+/*
|
||||
+ * There are at least two different NSA310 designs. This variant has
|
||||
+ * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller.
|
||||
+ */
|
||||
+
|
||||
+/ {
|
||||
+ model = "ZyXEL NSA310b";
|
||||
+ compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
+
|
||||
+ memory {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x00000000 0x10000000>;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttyS0,115200";
|
||||
+ stdout-path = &uart0;
|
||||
+ };
|
||||
+
|
||||
+ ocp@f1000000 {
|
||||
+ pinctrl: pin-controller@10000 {
|
||||
+ pinctrl-names = "default";
|
||||
+
|
||||
+ pmx_led_esata_green: pmx-led-esata-green {
|
||||
+ marvell,pins = "mpp12";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_esata_red: pmx-led-esata-red {
|
||||
+ marvell,pins = "mpp13";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_usb_green: pmx-led-usb-green {
|
||||
+ marvell,pins = "mpp15";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_usb_red: pmx-led-usb-red {
|
||||
+ marvell,pins = "mpp16";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_sys_green: pmx-led-sys-green {
|
||||
+ marvell,pins = "mpp28";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_sys_red: pmx-led-sys-red {
|
||||
+ marvell,pins = "mpp29";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_hdd_green: pmx-led-hdd-green {
|
||||
+ marvell,pins = "mpp41";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_hdd_red: pmx-led-hdd-red {
|
||||
+ marvell,pins = "mpp42";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+
|
||||
+ i2c@11000 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ lm85: lm85@2e {
|
||||
+ compatible = "national,lm85";
|
||||
+ reg = <0x2e>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio-leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ green-sys {
|
||||
+ label = "nsa310:green:sys";
|
||||
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ red-sys {
|
||||
+ label = "nsa310:red:sys";
|
||||
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ green-hdd {
|
||||
+ label = "nsa310:green:hdd";
|
||||
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ red-hdd {
|
||||
+ label = "nsa310:red:hdd";
|
||||
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ green-esata {
|
||||
+ label = "nsa310:green:esata";
|
||||
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ red-esata {
|
||||
+ label = "nsa310:red:esata";
|
||||
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ green-usb {
|
||||
+ label = "nsa310:green:usb";
|
||||
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ red-usb {
|
||||
+ label = "nsa310:red:usb";
|
||||
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ green-copy {
|
||||
+ label = "nsa310:green:copy";
|
||||
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ red-copy {
|
||||
+ label = "nsa310:red:copy";
|
||||
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
267
target/linux/kirkwood/patches-4.9/107-03-nsa310s.patch
Normal file
267
target/linux/kirkwood/patches-4.9/107-03-nsa310s.patch
Normal file
|
|
@ -0,0 +1,267 @@
|
|||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -239,6 +239,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
|
||||
kirkwood-nsa310.dtb \
|
||||
kirkwood-nsa310a.dtb \
|
||||
kirkwood-nsa310b.dtb \
|
||||
+ kirkwood-nsa310s.dtb \
|
||||
kirkwood-nsa320.dtb \
|
||||
kirkwood-nsa325.dtb \
|
||||
kirkwood-openblocks_a6.dtb \
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
|
||||
@@ -0,0 +1,254 @@
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "kirkwood-nsa3x0-common.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "ZyXEL NSA310S";
|
||||
+ compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
|
||||
+
|
||||
+ memory {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x00000000 0x10000000>;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
+ stdout-path = &uart0;
|
||||
+ };
|
||||
+
|
||||
+ ocp@f1000000 {
|
||||
+ pinctrl: pin-controller@10000 {
|
||||
+ pinctrl-names = "default";
|
||||
+
|
||||
+ pmx_sata0: pmx-sata0 {
|
||||
+ marvell,pins;
|
||||
+ marvell,function = "sata0";
|
||||
+ };
|
||||
+
|
||||
+ pmx_sata1: pmx-sata1 {
|
||||
+ marvell,pins;
|
||||
+ marvell,function = "sata1";
|
||||
+ };
|
||||
+
|
||||
+ pmx_usb_power: pmx-usb-power {
|
||||
+ marvell,pins = "mpp21";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_pwr_off: pmx-pwr-off {
|
||||
+ marvell,pins = "mpp27";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_btn_reset: pmx-btn-reset {
|
||||
+ marvell,pins = "mpp24";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_btn_copy: pmx-btn-copy {
|
||||
+ marvell,pins = "mpp25";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_btn_power: pmx-btn-power {
|
||||
+ marvell,pins = "mpp26";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_hdd2_green: pmx-led-hdd2-green {
|
||||
+ marvell,pins = "mpp34";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_hdd2_red: pmx-led-hdd2-red {
|
||||
+ marvell,pins = "mpp12";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_usb_green: pmx-led-usb-green {
|
||||
+ marvell,pins = "mpp15";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_copy_green: pmx-led-copy-green {
|
||||
+ marvell,pins = "mpp22";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_copy_red: pmx-led-copy-red {
|
||||
+ marvell,pins = "mpp23";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_sys_green: pmx-led-sys-green {
|
||||
+ marvell,pins = "mpp28";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_sys_orange: pmx-led-sys-orange {
|
||||
+ marvell,pins = "mpp29";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_hdd1_green: pmx-led-hdd1-green {
|
||||
+ marvell,pins = "mpp16";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_hdd1_red: pmx-led-hdd1-red {
|
||||
+ marvell,pins = "mpp13";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_pwr_sata1: pmx-pwr-sata1 {
|
||||
+ marvell,pins = "mpp33";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+
|
||||
+ i2c@11000 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ ht1382: rtc@68 {
|
||||
+ compatible = "htk,ht1382";
|
||||
+ reg = <0x68>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ regulators {
|
||||
+ compatible = "simple-bus";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ pinctrl-0 = <&pmx_pwr_sata1>;
|
||||
+ pinctrl-names = "default";
|
||||
+
|
||||
+ usb0_power: regulator@1 {
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+
|
||||
+ sata1_power: regulator@2 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ reg = <2>;
|
||||
+ regulator-name = "SATA1 Power";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ enable-active-high;
|
||||
+ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio_keys {
|
||||
+ power {
|
||||
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ copy {
|
||||
+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ reset {
|
||||
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio-leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ green-sys {
|
||||
+ label = "nsa310s:green:sys";
|
||||
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ orange-sys {
|
||||
+ label = "nsa310s:orange:sys";
|
||||
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ green-hdd1 {
|
||||
+ label = "nsa310s:green:hdd1";
|
||||
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ red-hdd1 {
|
||||
+ label = "nsa310s:red:hdd1";
|
||||
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ green-hdd2 {
|
||||
+ label = "nsa310s:green:hdd2";
|
||||
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ red-hdd2 {
|
||||
+ label = "nsa310s:red:hdd2";
|
||||
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ green-usb {
|
||||
+ label = "nsa310s:green:usb";
|
||||
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ green-copy {
|
||||
+ label = "nsa310s:green:copy";
|
||||
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ red-copy {
|
||||
+ label = "nsa310s:red:copy";
|
||||
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio_poweroff {
|
||||
+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&nand {
|
||||
+ status = "okay";
|
||||
+ chip-delay = <35>;
|
||||
+
|
||||
+ partition@0 {
|
||||
+ label = "uboot";
|
||||
+ reg = <0x0000000 0xe0000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@e0000 {
|
||||
+ label = "uboot_env";
|
||||
+ reg = <0xe0000 0x100000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@100000 {
|
||||
+ label = "second stage u-boot";
|
||||
+ reg = <0x100000 0x200000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@200000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x200000 0x7e00000>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&sata {
|
||||
+ status = "okay";
|
||||
+ nr-ports = <2>;
|
||||
+};
|
||||
+
|
||||
+&mdio {
|
||||
+ status = "okay";
|
||||
+ ethphy0: ethernet-phy@1 {
|
||||
+ compatible = "marvell,88e1318s";
|
||||
+ reg = <1>;
|
||||
+ marvell,reg-init = <0x1 0x16 0x0 0x3>,
|
||||
+ <0x1 0x10 0x0 0x1017>,
|
||||
+ <0x1 0x11 0x0 0x4408>,
|
||||
+ <0x1 0x16 0x0 0x0>,
|
||||
+ <0x1 0x4 0x0 0x1e1>,
|
||||
+ <0x1 0x9 0x0 0x300>,
|
||||
+ <0x1 0x10 0x0 0x3860>,
|
||||
+ <0x1 0x0 0x0 0x9140>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+ð0 {
|
||||
+ status = "okay";
|
||||
+ ethernet0-port@0 {
|
||||
+ phy-handle = <ðphy0>;
|
||||
+ };
|
||||
+};
|
||||
173
target/linux/kirkwood/patches-4.9/108-on100.patch
Normal file
173
target/linux/kirkwood/patches-4.9/108-on100.patch
Normal file
|
|
@ -0,0 +1,173 @@
|
|||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/kirkwood-on100.dts
|
||||
@@ -0,0 +1,160 @@
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "kirkwood.dtsi"
|
||||
+#include "kirkwood-6282.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "Cisco Systems ON100";
|
||||
+ compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
|
||||
+
|
||||
+ memory {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x00000000 0x20000000>;
|
||||
+ };
|
||||
+
|
||||
+ aliases {
|
||||
+ serial0 = &uart0;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
+ stdout-path = "serial0:115200n8";
|
||||
+ };
|
||||
+
|
||||
+ gpio_keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ pinctrl-0 = <&pmx_btn_reset>;
|
||||
+ pinctrl-names = "default";
|
||||
+
|
||||
+ button@1 {
|
||||
+ label = "Reset Button";
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio-leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+ pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
|
||||
+ pinctrl-names = "default";
|
||||
+
|
||||
+ health-g {
|
||||
+ label = "on100:green:health";
|
||||
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ health-r {
|
||||
+ label = "on100:red:health";
|
||||
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ health2-g {
|
||||
+ label = "on100:green:health2";
|
||||
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ health2-r {
|
||||
+ label = "on100:red:health2";
|
||||
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+ð0 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ ethernet0-port@0 {
|
||||
+ phy-handle = <ðphy0>;
|
||||
+ phy-connection-type = "rgmii-id";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+ð1 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ ethernet1-port@0 {
|
||||
+ phy-handle = <ðphy1>;
|
||||
+ phy-connection-type = "rgmii-id";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&mdio {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ ethphy0: ethernet-phy@0 {
|
||||
+ /* Marvell 88E1121R */
|
||||
+ compatible = "ethernet-phy-id0141.0cb0",
|
||||
+ "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <0>;
|
||||
+ };
|
||||
+
|
||||
+ ethphy1: ethernet-phy@1 {
|
||||
+ /* Marvell 88E1121R */
|
||||
+ compatible = "ethernet-phy-id0141.0cb0",
|
||||
+ "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&nand {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ partition@0 {
|
||||
+ label = "u-boot";
|
||||
+ reg = <0x00000000 0x000a0000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@a0000 {
|
||||
+ label = "u-boot environment";
|
||||
+ reg = <0x000a0000 0x00020000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@c0000 {
|
||||
+ label = "kernel";
|
||||
+ reg = <0x000c0000 0x00540000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@600000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x00600000 0x1fa00000>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pinctrl {
|
||||
+ pmx_led_health_r: pmx-led-health-r {
|
||||
+ marvell,pins = "mpp45";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_health_g: pmx-led-health-g {
|
||||
+ marvell,pins = "mpp44";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_health2_r: pmx-led-health2-r {
|
||||
+ marvell,pins = "mpp47";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_led_health2_g: pmx-led-health2-g {
|
||||
+ marvell,pins = "mpp46";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ pmx_btn_reset: pmx-led-reset {
|
||||
+ marvell,pins = "mpp31";
|
||||
+ marvell,function = "gpio";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&sdio {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -242,6 +242,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
|
||||
kirkwood-nsa310s.dtb \
|
||||
kirkwood-nsa320.dtb \
|
||||
kirkwood-nsa325.dtb \
|
||||
+ kirkwood-on100.dtb \
|
||||
kirkwood-openblocks_a6.dtb \
|
||||
kirkwood-openblocks_a7.dtb \
|
||||
kirkwood-openrd-base.dtb \
|
||||
35
target/linux/kirkwood/patches-4.9/200-disable-tso.patch
Normal file
35
target/linux/kirkwood/patches-4.9/200-disable-tso.patch
Normal file
|
|
@ -0,0 +1,35 @@
|
|||
From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
|
||||
Subject: [PATCH] net: mv643xx_eth: Make TSO disabled by default
|
||||
|
||||
Data corruption has been observed to be produced by TSO. For instance,
|
||||
accessing files on a NFS-server with TSO enabled results in different data
|
||||
transferred each time.
|
||||
|
||||
This has been observed only on Kirkwood platforms, i.e. with the mv643xx_eth
|
||||
driver. Same tests on platforms using the mvneta ethernet driver have
|
||||
passed without errors.
|
||||
|
||||
Make TSO disabled by default for now, until we can found a proper fix
|
||||
for the regression.
|
||||
|
||||
Fixes: 3ae8f4e0b98 ('net: mv643xx_eth: Implement software TSO')
|
||||
Reported-by: Slawomir Gajzner <slawomir.gajzner <at> gmail.com>
|
||||
Reported-by: Julien D'Ascenzio <jdascenzio <at> yahoo.fr>
|
||||
Signed-off-by: Ezequiel Garcia <ezequiel.garcia <at> free-electrons.com>
|
||||
---
|
||||
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
|
||||
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
|
||||
@@ -3197,11 +3197,11 @@ static int mv643xx_eth_probe(struct plat
|
||||
dev->watchdog_timeo = 2 * HZ;
|
||||
dev->base_addr = 0;
|
||||
|
||||
- dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
|
||||
+ dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
|
||||
dev->vlan_features = dev->features;
|
||||
|
||||
dev->features |= NETIF_F_RXCSUM;
|
||||
- dev->hw_features = dev->features;
|
||||
+ dev->hw_features = dev->features | NETIF_F_TSO;
|
||||
|
||||
dev->priv_flags |= IFF_UNICAST_FLT;
|
||||
dev->gso_max_segs = MV643XX_MAX_TSO_SEGS;
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
--- a/arch/arm/mach-mvebu/Kconfig
|
||||
+++ b/arch/arm/mach-mvebu/Kconfig
|
||||
@@ -117,6 +117,7 @@ config MACH_DOVE
|
||||
config MACH_KIRKWOOD
|
||||
bool "Marvell Kirkwood boards"
|
||||
depends on ARCH_MULTI_V5
|
||||
+ select ARCH_WANT_LIBATA_LEDS
|
||||
select CPU_FEROCEON
|
||||
select GPIOLIB
|
||||
select KIRKWOOD_CLK
|
||||
|
|
@ -0,0 +1,62 @@
|
|||
The WRT1900AC among other Linksys routers uses a dual-firmware layout.
|
||||
Dynamically rename the active partition to "ubi".
|
||||
|
||||
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
|
||||
---
|
||||
--- a/drivers/mtd/ofpart.c
|
||||
+++ b/drivers/mtd/ofpart.c
|
||||
@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d
|
||||
return of_get_property(pp, "compatible", NULL);
|
||||
}
|
||||
|
||||
+static int mangled_rootblock;
|
||||
+
|
||||
static int parse_ofpart_partitions(struct mtd_info *master,
|
||||
const struct mtd_partition **pparts,
|
||||
struct mtd_part_parser_data *data)
|
||||
@@ -32,6 +34,7 @@ static int parse_ofpart_partitions(struc
|
||||
struct mtd_partition *parts;
|
||||
struct device_node *mtd_node;
|
||||
struct device_node *ofpart_node;
|
||||
+ const char *owrtpart = "ubi";
|
||||
const char *partname;
|
||||
struct device_node *pp;
|
||||
int nr_parts, i, ret = 0;
|
||||
@@ -110,9 +113,15 @@ static int parse_ofpart_partitions(struc
|
||||
parts[i].size = of_read_number(reg + a_cells, s_cells);
|
||||
parts[i].of_node = pp;
|
||||
|
||||
- partname = of_get_property(pp, "label", &len);
|
||||
- if (!partname)
|
||||
- partname = of_get_property(pp, "name", &len);
|
||||
+ if (mangled_rootblock && (i == mangled_rootblock)) {
|
||||
+ partname = owrtpart;
|
||||
+ } else {
|
||||
+ partname = of_get_property(pp, "label", &len);
|
||||
+
|
||||
+ if (!partname)
|
||||
+ partname = of_get_property(pp, "name", &len);
|
||||
+ }
|
||||
+
|
||||
parts[i].name = partname;
|
||||
|
||||
if (of_get_property(pp, "read-only", &len))
|
||||
@@ -213,6 +222,18 @@ static int __init ofpart_parser_init(voi
|
||||
return 0;
|
||||
}
|
||||
|
||||
+static int __init active_root(char *str)
|
||||
+{
|
||||
+ get_option(&str, &mangled_rootblock);
|
||||
+
|
||||
+ if (!mangled_rootblock)
|
||||
+ return 1;
|
||||
+
|
||||
+ return 1;
|
||||
+}
|
||||
+
|
||||
+__setup("mangled_rootblock=", active_root);
|
||||
+
|
||||
static void __exit ofpart_parser_exit(void)
|
||||
{
|
||||
deregister_mtd_parser(&ofpart_parser);
|
||||
Loading…
Reference in a new issue