ramips: Added support for ZBT-826 / ZBT-1026

Support for these MT7620-based routers: https://wiki.openwrt.org/toh/zbt/we-826
Based on Oskari’s patches found here: https://dev.openwrt.org/ticket/19996

Signed-off-by: Jamie Stuart <jamie@onebillion.org>

SVN-Revision: 48865
This commit is contained in:
John Crispin 2016-03-01 09:17:06 +00:00
parent 59121fdd69
commit 96eb5c6fa8
7 changed files with 155 additions and 0 deletions

5
target/linux/ramips/base-files/etc/board.d/01_leds Executable file → Normal file
View file

@ -268,6 +268,11 @@ zbt-wa05)
set_wifi_led "$board:blue:air"
set_usb_led "$board:blue:usb"
;;
zbt-we826)
ucidef_set_led_default "power" "power" "$board:green:power" "1"
set_wifi_led "$board:green:wifi"
set_usb_led "$board:green:usb"
;;
zbt-wr8305rt)
ucidef_set_led_default "power" "power" "$board:green:sys" "1"
set_usb_led "$board:green:usb"

1
target/linux/ramips/base-files/etc/board.d/02_network Executable file → Normal file
View file

@ -209,6 +209,7 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "0:wan" "6@eth0"
;;
zbt-we826|\
zbt-wr8305rt)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"

3
target/linux/ramips/base-files/lib/ramips.sh Executable file → Normal file
View file

@ -475,6 +475,9 @@ ramips_board_detect() {
*"ZBT-WA05")
name="zbt-wa05"
;;
*"ZBT-WE826")
name="zbt-we826"
;;
*"ZBT-WG2626")
name="zbt-wg2626"
;;

1
target/linux/ramips/base-files/lib/upgrade/platform.sh Executable file → Normal file
View file

@ -139,6 +139,7 @@ platform_check_image() {
y1|\
y1s|\
zbt-wa05|\
zbt-we826|\
zbt-wg2626|\
zbt-wr8305rt|\
zte-q7|\

View file

@ -0,0 +1,124 @@
/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc";
model = "ZBT-WE826";
chosen {
bootargs = "console=ttyS0,115200";
};
palmbus@10000000 {
gpio0: gpio@600 {
status = "okay";
};
gpio1: gpio@638 {
status = "okay";
};
gpio3: gpio@688 {
status = "okay";
};
spi@b00 {
status = "okay";
en25q128@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25q128";
reg = <0 0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
};
sdhci@10130000 {
status = "okay";
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
ralink,port-map = "wllll";
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa";
ralink,function = "gpio";
};
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "zbt-we826:green:power";
gpios = <&gpio1 14 0>;
};
usb {
label = "zbt-we826:green:usb";
gpios = <&gpio1 15 0>;
};
air {
label = "zbt-we826:green:wifi";
gpios = <&gpio3 0 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
};
pcie@10140000 {
status = "okay";
};
};

View file

@ -976,6 +976,7 @@ Image/Build/Profile/MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),miwifi
Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
Image/Build/Profile/YOUKU-YK1=$(call BuildFirmware/Default16M/$(1),$(1),youku-yk1,YOUKU-YK1)
Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
Image/Build/Profile/ZBT-WE826=$(call BuildFirmware/Default16M/$(1),$(1),zbt-we826,ZBT-WE826)
Image/Build/Profile/ZBT-WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wr8305rt,ZBT-WR8305RT)
Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
microwrt_mtd_size=16515072
@ -1018,6 +1019,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/ZTE-Q7,$(1))
$(call Image/Build/Profile/YOUKU-YK1,$(1))
$(call Image/Build/Profile/ZBT-WA05,$(1))
$(call Image/Build/Profile/ZBT-WE826,$(1))
$(call Image/Build/Profile/ZBT-WR8305RT,$(1))
$(call Image/Build/Profile/ArcherC20i,$(1))
$(call Image/Build/Profile/MicroWRT,$(1))

View file

@ -0,0 +1,19 @@
#
# Copyright (C) 2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/ZBT-WE826
NAME:=ZBT-WE826 Device
PACKAGES:=\
kmod-scsi-core kmod-scsi-generic kmod-mmc kmod-sdhci \
block-mount kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci \
kmod-mt76
endef
define Profile/ZBT-WE826/Description
Support for ZBT WE-826-(B,T) routers
endef
$(eval $(call Profile,ZBT-WE826))