add switch config info to network documentation
SVN-Revision: 4836
This commit is contained in:
parent
26b307274c
commit
95a617c4da
1 changed files with 29 additions and 0 deletions
|
@ -46,5 +46,34 @@ PPP based protocols (pppoe, pptp, ...) accept these options:
|
||||||
demand:
|
demand:
|
||||||
Use Dial on Demand (value specifies the maximum idle time)
|
Use Dial on Demand (value specifies the maximum idle time)
|
||||||
|
|
||||||
|
(pptp)
|
||||||
|
server: The remote pptp server IP
|
||||||
|
|
||||||
For all protocol types, you can also specify the MTU by using the "mtu" option.
|
For all protocol types, you can also specify the MTU by using the "mtu" option.
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Setting up the switch (currently broadcom only)
|
||||||
|
|
||||||
|
|
||||||
|
The switch configuration is set by adding a 'switch' config section.
|
||||||
|
Example:
|
||||||
|
|
||||||
|
config switch eth0
|
||||||
|
option vlan0 "1 2 3 4 5*"
|
||||||
|
option vlan1 "0 5"
|
||||||
|
|
||||||
|
On Broadcom hardware the section name needs to be eth0, as the switch driver
|
||||||
|
does not detect the switch on any other physical device.
|
||||||
|
Every vlan option needs to have the name vlan<n> where <n> is the VLAN number
|
||||||
|
as used in the switch driver.
|
||||||
|
As value it takes a list of ports with these optional suffixes:
|
||||||
|
|
||||||
|
'*': Set the default VLAN (PVID) of the Port to the current VLAN
|
||||||
|
'u': Force the port to be untagged
|
||||||
|
't': Force the port to be tagged
|
||||||
|
|
||||||
|
The CPU port defaults to tagged, all other ports to untagged.
|
||||||
|
On Broadcom hardware the CPU port is always 5. The other ports may vary with
|
||||||
|
different hardware.
|
||||||
|
|
Loading…
Reference in a new issue