KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ipq40xx: use patches that were sent upstream

Browse source 
Signed-off-by: John Crispin <john@phrozen.org>
This commit is contained in:
John Crispin 2018-07-24 14:38:57 +02:00
parent e8c58e7ddd
commit 95672e0433
27 changed files with 510 additions and 296 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts
View file

@ -164,7 +164,7 @@
status = "okay";
};
&spi_0 {
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";

2
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
View file

@ -193,7 +193,7 @@
};
};
&spi_0 {
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";

2
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts
View file

@ -201,7 +201,7 @@
status = "okay";
};
&spi_0 { /* BLSP1 QUP1 */
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";

2
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
View file

@ -144,7 +144,7 @@
status = "okay";
};
&spi_0 {
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;

2
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
View file

@ -193,7 +193,7 @@
};
};
&spi_0 { /* BLSP1 QUP1 */
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";

2
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
View file

@ -195,7 +195,7 @@
};
};
&spi_0 { /* BLSP1 QUP1 */
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";

2
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
View file

@ -157,7 +157,7 @@
};
};
&spi_0 {
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";

2
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts
View file

@ -174,7 +174,7 @@
status = "okay";
};
&spi_0 {
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";

4
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
View file

@ -98,7 +98,7 @@
status = "okay";
};
spi_0: spi@78b5000 {
spi0: spi@78b5000 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
@ -113,7 +113,7 @@
};
};
i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
i2c0: i2c@78b7000 { /* BLSP1 QUP2 */
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";

2
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
View file

@ -162,7 +162,7 @@
status = "okay";
};
&spi_0 {
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";

2
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
View file

@ -148,7 +148,7 @@
status = "okay";
};
&spi_0 {
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";

4
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
View file

@ -143,7 +143,7 @@
vlan_tag = <0 0x20>;
};
&i2c_0 {
&blsp1_i2c3{
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
@ -155,7 +155,7 @@
};
};
&i2c_1 {
&blsp1_i2c4{
pinctrl-0 = <&i2c_1_pins>;
pinctrl-names = "default";
status = "okay";

19
target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch
View file

@ -1,10 +1,22 @@
Check for SCM availability before attempting to use SPM
From 341844c7e06afccd64261719fa388339a589b0a4 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@nbd.name>
Date: Sun, 22 Jul 2018 12:53:04 +0200
Subject: [PATCH] soc: qcom: spm: add SCM probe dependency
Check for SCM availability before attempting to use SPM. SPM probe will
fail otherwise.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/soc/qcom/spm.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
index f9d7a85b2822..53807e839664 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru
@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
cpumask_t mask;
bool use_scm_power_down = false;
@ -14,3 +26,6 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
for (i = 0; ; i++) {
state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
if (!state_node)
--
2.11.0

71
target/linux/ipq40xx/patches-4.14/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch → target/linux/ipq40xx/patches-4.14/071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
View file

@ -1,23 +1,23 @@
From 6a6c067b7ce2b3de4efbafddc134afbea3ddc1a3 Mon Sep 17 00:00:00 2001
From 364123029d8d547336323fbd3d659ecd0bba913f Mon Sep 17 00:00:00 2001
From: Matthew McClintock <mmcclint@codeaurora.org>
Date: Fri, 8 Apr 2016 15:26:10 -0500
Subject: [PATCH] qcom: ipq4019: use v2 of the kpss bringup mechanism
Date: Mon, 23 Jul 2018 08:41:02 +0200
Subject: [PATCH 5/8] qcom: ipq4019: use v2 of the kpss bringup mechanism
v1 was the incorrect choice here and sometimes the board
would not come up properly.
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
Changes:
- moved L2-Cache to be a subnode of cpu0
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 32 ++++++++++++++++++++++++--------
1 file changed, 24 insertions(+), 8 deletions(-)
arch/arm/boot/dts/qcom-ipq4019.dtsi | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 93647db5d90b..06434fd02d40 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -36,19 +36,27 @@
@@ -52,7 +52,8 @@
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@ -27,17 +27,7 @@ Changes:
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
reg = <0x0>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
operating-points-v2 = <&cpu0_opp_table>;
+
+ L2: l2-cache {
+ compatible = "qcom,arch-cache";
+ cache-level = <2>;
+ qcom,saw = <&saw_l2>;
+ };
};
@@ -71,7 +72,8 @@
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@ -47,7 +37,7 @@ Changes:
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
reg = <0x1>;
@@ -60,7 +68,8 @@
@@ -82,7 +84,8 @@
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@ -57,7 +47,7 @@ Changes:
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
reg = <0x2>;
@@ -72,7 +81,8 @@
@@ -93,13 +96,19 @@
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@ -67,43 +57,44 @@ Changes:
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
reg = <0x3>;
@@ -265,22 +275,22 @@
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
};
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
};
pmu {
@@ -268,22 +277,22 @@
};
acc0: clock-controller@b088000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
};
acc1: clock-controller@b098000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
};
acc2: clock-controller@b0a8000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
};
acc3: clock-controller@b0b8000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
};
@@ -308,6 +318,12 @@
regulator;
};
+ saw_l2: regulator@b012000 {
+ compatible = "qcom,saw2";
+ reg = <0xb012000 0x1000>;
+ regulator;
+ };
+
serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78af000 0x200>;
--
2.11.0

23
target/linux/ipq40xx/patches-4.14/017-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch → target/linux/ipq40xx/patches-4.14/072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch
View file

@ -1,19 +1,22 @@
From 18c3b42575a154343831aec0637aab00e19440e1 Mon Sep 17 00:00:00 2001
From 544af73985cd14b450bb8e8a6c22b89a555ac729 Mon Sep 17 00:00:00 2001
From: Matthew McClintock <mmcclint@codeaurora.org>
Date: Thu, 17 Mar 2016 15:01:09 -0500
Subject: [PATCH 17/69] qcom: ipq4019: add cpu operating points for cpufreq
Date: Mon, 23 Jul 2018 09:10:35 +0200
Subject: [PATCH 6/8] qcom: ipq4019: add cpu operating points for cpufreq
support
This adds some operating points for cpu frequeny scaling
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 34 ++++++++++++++++++++++++++--------
1 file changed, 26 insertions(+), 8 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -40,14 +40,7 @@
Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019.dtsi
===================================================================
--- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -41,14 +41,7 @@
reg = <0x0>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
@ -29,7 +32,7 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
};
cpu@1 {
@@ -59,6 +52,7 @@
@@ -61,6 +54,7 @@
reg = <0x1>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
@ -37,7 +40,7 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
};
cpu@2 {
@@ -70,6 +64,7 @@
@@ -73,6 +67,7 @@
reg = <0x2>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
@ -45,7 +48,7 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
};
cpu@3 {
@@ -81,6 +76,29 @@
@@ -85,6 +80,29 @@
reg = <0x3>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
@ -73,5 +76,5 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
+ opp-hz = /bits/ 64 <716000000>;
+ clock-latency-ns = <256000>;
};
};
L2: l2-cache {

38
target/linux/ipq40xx/patches-4.14/073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch Normal file
View file

@ -0,0 +1,38 @@
From d60e006ec0e425877aacc61c7ece3da0434a8fce Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 23 Jul 2018 16:34:54 +0200
Subject: [PATCH 7/8] qcom: ipq4019: fix cpu0's qcom,saw2 reg value
while compiling an ipq4019 target, dtc will complain:
regulator@b089000 unit address format error, expected "2089000"
The saw0 regulator reg value seems to be
copied and pasted from qcom-ipq8064.dtsi.
This patch fixes the reg value to match that of the
unit address which in turn silences the warning.
(There is no driver for qcom,saw2 right now.
So this went unnoticed)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 98b9850ed2a0..3289b3a6c10e 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -316,7 +316,7 @@
saw0: regulator@b089000 {
compatible = "qcom,saw2";
- reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
+ reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
regulator;
};
--
2.11.0

25
target/linux/ipq40xx/patches-4.14/307-ARM-qcom-Add-IPQ4019-SoC-support.patch → target/linux/ipq40xx/patches-4.14/074-ARM-qcom-Add-IPQ4019-SoC-support.patch
View file

@ -1,28 +1,33 @@
From e7748d641ae37081e2034869491f1629461ae13c Mon Sep 17 00:00:00 2001
From 89b43d59ec8c9cda588555eb1f2754dd19ef5144 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Sat, 19 Nov 2016 00:58:18 +0100
Subject: [PATCH] ARM: qcom: Add IPQ4019 SoC support
Date: Sun, 22 Jul 2018 12:07:57 +0200
Subject: [PATCH 8/8] ARM: qcom: Add IPQ4019 SoC support
Add support for the Qualcomm Atheros IPQ4019 SoC.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/arm/Makefile | 1 +
arch/arm/mach-qcom/Kconfig | 5 +++++
2 files changed, 6 insertions(+)
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -149,6 +149,7 @@ textofs-$(CONFIG_SA1111) := 0x00208000
endif
Index: linux-4.14.54/arch/arm/Makefile
===================================================================
--- linux-4.14.54.orig/arch/arm/Makefile
+++ linux-4.14.54/arch/arm/Makefile
@@ -150,6 +150,7 @@ endif
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
# Machine directory name. This list is sorted alphanumerically
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
# by CONFIG_* macro name.
Index: linux-4.14.54/arch/arm/mach-qcom/Kconfig
===================================================================
--- linux-4.14.54.orig/arch/arm/mach-qcom/Kconfig
+++ linux-4.14.54/arch/arm/mach-qcom/Kconfig
@@ -27,4 +27,9 @@ config ARCH_MDM9615
bool "Enable support for MDM9615"
select CLKSRC_QCOM

44
target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch Normal file
View file

@ -0,0 +1,44 @@
From 5f01733dc755dfadfa51b7b3c6c160e632fc6002 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Tue, 24 Jul 2018 15:09:36 +0200
Subject: [PATCH 1/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document
This patch adds the binding documentation for the HS/SS USB PHY found
inside Qualcom Dakota SoCs.
Signed-off-by: John Crispin <john@phrozen.org>
---
.../bindings/phy/phy-qcom-ipq4019-usb.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
diff --git a/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
new file mode 100644
index 000000000000..362877fcafed
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
@@ -0,0 +1,21 @@
+Qualcom Dakota HS/SS USB PHY
+
+Required properties:
+ - compatible: "qcom,usb-ss-ipq4019-phy",
+ "qcom,usb-hs-ipq4019-phy"
+ - reg: offset and length of the registers
+ - #phy-cells: should be 0
+ - resets: the reset controllers as listed below
+ - reset-names: the names of the reset controllers
+ "por_rst" - the POR reset line for SS and HS phys
+ "srif_rst" - the SRIF reset line for HS phys
+Example:
+
+hsphy@a8000 {
+ compatible = "qcom,usb-hs-ipq4019-phy";
+ phy-cells = <0>;
+ reg = <0xa8000 0x40>;
+ resets = <&gcc USB2_HSPHY_POR_ARES>,
+ <&gcc USB2_HSPHY_S_ARES>;
+ reset-names = "por_rst", "srif_rst";
+};
--
2.11.0

172
target/linux/ipq40xx/patches-4.14/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch → target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch
View file

@ -1,138 +1,24 @@
From ea5f4d6f4716f3a0bb4fc3614b7a0e8c0df1cb81 Mon Sep 17 00:00:00 2001
From: Matthew McClintock <mmcclint@codeaurora.org>
Date: Thu, 17 Mar 2016 16:22:28 -0500
Subject: [PATCH] qcom: ipq4019: add USB nodes to ipq4019 SoC device tree
From 633f0e08498aebfdb932bd71319b4cb136709499 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Tue, 24 Jul 2018 14:45:49 +0200
Subject: [PATCH 2/3] phy: qcom-ipq4019-usb: add driver for QCOM/IPQ4019
This adds the SoC nodes to the ipq4019 device tree and
enable it for the DK01.1 board.
Add a driver to setup the USB phy on Qualcom Dakota SoCs.
The driver sets up HS and SS phys. In case of HS some magic values need to
be written to magic offsets. These were taken from the SDK driver.
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
Changes:
- replaced space with tab
- added sleep and mock_utmi clocks
- added registers for usb2 and usb3 parent node
- changed compatible to qca,ipa4019-dwc3
- updated usb2 and usb3 names
(included the reg - in case they become necessary later)
---
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 71 +++++++++++++++++++++++++++
2 files changed, 91 insertions(+)
drivers/phy/qualcomm/Kconfig | 7 ++
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 188 ++++++++++++++++++++++++++++
3 files changed, 196 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -101,5 +101,25 @@
wifi@a800000 {
status = "ok";
};
+
+ usb3_ss_phy: ssphy@9a000 {
+ status = "ok";
+ };
+
+ usb3_hs_phy: hsphy@a6000 {
+ status = "ok";
+ };
+
+ usb3: usb3@8af8800 {
+ status = "ok";
+ };
+
+ usb2_hs_phy: hsphy@a8000 {
+ status = "ok";
+ };
+
+ usb2: usb2@60f8800 {
+ status = "ok";
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -539,5 +539,79 @@
"legacy";
status = "disabled";
};
+
+ usb3_ss_phy: ssphy@9a000 {
+ compatible = "qcom,usb-ss-ipq4019-phy";
+ #phy-cells = <0>;
+ reg = <0x9a000 0x800>;
+ reg-names = "phy_base";
+ resets = <&gcc USB3_UNIPHY_PHY_ARES>;
+ reset-names = "por_rst";
+ status = "disabled";
+ };
+
+ usb3_hs_phy: hsphy@a6000 {
+ compatible = "qcom,usb-hs-ipq4019-phy";
+ #phy-cells = <0>;
+ reg = <0xa6000 0x40>;
+ reg-names = "phy_base";
+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
+ reset-names = "por_rst", "srif_rst";
+ status = "disabled";
+ };
+
+ usb3@8af8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x8af8800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gcc GCC_USB3_MASTER_CLK>,
+ <&gcc GCC_USB3_SLEEP_CLK>,
+ <&gcc GCC_USB3_MOCK_UTMI_CLK>;
+ clock-names = "master", "sleep", "mock_utmi";
+ ranges;
+ status = "disabled";
+
+ dwc3@8a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x8a00000 0xf8000>;
+ interrupts = <0 132 0>;
+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ };
+ };
+
+ usb2_hs_phy: hsphy@a8000 {
+ compatible = "qcom,usb-hs-ipq4019-phy";
+ #phy-cells = <0>;
+ reg = <0xa8000 0x40>;
+ reg-names = "phy_base";
+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
+ reset-names = "por_rst", "srif_rst";
+ status = "disabled";
+ };
+
+ usb2@60f8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x60f8800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gcc GCC_USB2_MASTER_CLK>,
+ <&gcc GCC_USB2_SLEEP_CLK>,
+ <&gcc GCC_USB2_MOCK_UTMI_CLK>;
+ clock-names = "master", "sleep", "mock_utmi";
+ ranges;
+ status = "disabled";
+
+ dwc3@6000000 {
+ compatible = "snps,dwc3";
+ reg = <0x6000000 0xf8000>;
+ interrupts = <0 136 0>;
+ phys = <&usb2_hs_phy>;
+ phy-names = "usb2-phy";
+ dr_mode = "host";
+ };
+ };
};
};
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
Index: linux-4.14.54/drivers/phy/qualcomm/Kconfig
===================================================================
--- linux-4.14.54.orig/drivers/phy/qualcomm/Kconfig
+++ linux-4.14.54/drivers/phy/qualcomm/Kconfig
@@ -8,6 +8,13 @@ config PHY_QCOM_APQ8064_SATA
depends on OF
select GENERIC_PHY
@ -147,17 +33,10 @@ Changes:
config PHY_QCOM_IPQ806X_SATA
tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
depends on ARCH_QCOM
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
Index: linux-4.14.54/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
===================================================================
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
+++ linux-4.14.54/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
@ -347,3 +226,14 @@ Changes:
+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_LICENSE("GPL v2");
Index: linux-4.14.54/drivers/phy/qualcomm/Makefile
===================================================================
--- linux-4.14.54.orig/drivers/phy/qualcomm/Makefile
+++ linux-4.14.54/drivers/phy/qualcomm/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o

130
target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch Normal file
View file

@ -0,0 +1,130 @@
From 1fc7d5523e21ed140fed43c4dde011a3b6d9ba08 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Tue, 24 Jul 2018 14:47:55 +0200
Subject: [PATCH 3/3] qcom: ipq4019: add USB devicetree nodes
This patch makes USB work on the Dakota EVB.
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++
2 files changed, 94 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index 418f9a022336..2ee5f05d5a43 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -109,5 +109,25 @@
wifi@a800000 {
status = "ok";
};
+
+ usb3_ss_phy: ssphy@9a000 {
+ status = "ok";
+ };
+
+ usb3_hs_phy: hsphy@a6000 {
+ status = "ok";
+ };
+
+ usb3: usb3@8af8800 {
+ status = "ok";
+ };
+
+ usb2_hs_phy: hsphy@a8000 {
+ status = "ok";
+ };
+
+ usb2: usb2@60f8800 {
+ status = "ok";
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index e5e52adbd5a3..e6b12129f0e4 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -553,5 +553,79 @@
"legacy";
status = "disabled";
};
+
+ usb3_ss_phy: ssphy@9a000 {
+ compatible = "qcom,usb-ss-ipq4019-phy";
+ #phy-cells = <0>;
+ reg = <0x9a000 0x800>;
+ reg-names = "phy_base";
+ resets = <&gcc USB3_UNIPHY_PHY_ARES>;
+ reset-names = "por_rst";
+ status = "disabled";
+ };
+
+ usb3_hs_phy: hsphy@a6000 {
+ compatible = "qcom,usb-hs-ipq4019-phy";
+ #phy-cells = <0>;
+ reg = <0xa6000 0x40>;
+ reg-names = "phy_base";
+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
+ reset-names = "por_rst", "srif_rst";
+ status = "disabled";
+ };
+
+ usb3@8af8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x8af8800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gcc GCC_USB3_MASTER_CLK>,
+ <&gcc GCC_USB3_SLEEP_CLK>,
+ <&gcc GCC_USB3_MOCK_UTMI_CLK>;
+ clock-names = "master", "sleep", "mock_utmi";
+ ranges;
+ status = "disabled";
+
+ dwc3@8a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x8a00000 0xf8000>;
+ interrupts = <0 132 0>;
+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ };
+ };
+
+ usb2_hs_phy: hsphy@a8000 {
+ compatible = "qcom,usb-hs-ipq4019-phy";
+ #phy-cells = <0>;
+ reg = <0xa8000 0x40>;
+ reg-names = "phy_base";
+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
+ reset-names = "por_rst", "srif_rst";
+ status = "disabled";
+ };
+
+ usb2@60f8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x60f8800 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gcc GCC_USB2_MASTER_CLK>,
+ <&gcc GCC_USB2_SLEEP_CLK>,
+ <&gcc GCC_USB2_MOCK_UTMI_CLK>;
+ clock-names = "master", "sleep", "mock_utmi";
+ ranges;
+ status = "disabled";
+
+ dwc3@6000000 {
+ compatible = "snps,dwc3";
+ reg = <0x6000000 0xf8000>;
+ interrupts = <0 136 0>;
+ phys = <&usb2_hs_phy>;
+ phy-names = "usb2-phy";
+ dr_mode = "host";
+ };
+ };
};
};
--
2.11.0

153
target/linux/ipq40xx/patches-4.14/101-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch → target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch
View file

@ -1,42 +1,89 @@
From patchwork Mon Jan 29 05:11:16 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [02/15] ARM: dts: ipq4019: Add a few peripheral nodes
From 187519403273f0599c848d20eca9acce8b1807a5 Mon Sep 17 00:00:00 2001
From: Sricharan R <sricharan@codeaurora.org>
X-Patchwork-Id: 10189263
Message-Id: <1517202689-14212-3-git-send-email-sricharan@codeaurora.org>
To: robh+dt@kernel.org, robh@kernel.org, mark.rutland@arm.com,
linux@armlinux.org.uk, andy.gross@linaro.org, david.brown@linaro.org,
catalin.marinas@arm.com, will.deacon@arm.com, sboyd@codeaurora.org,
bjorn.andersson@linaro.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org
Cc: sricharan@codeaurora.org
Date: Mon, 29 Jan 2018 10:41:16 +0530
Date: Fri, 25 May 2018 11:41:12 +0530
Subject: [PATCH] ARM: dts: ipq4019: Add a few peripheral nodes
Now with the driver updates for some peripherals being there,
add i2c, spi, pcie, bam, qpic-nand, scm nodes to enhance the available
peripheral support.
Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 134 ++++++++++++++++++++++++++++++++++++
1 file changed, 134 insertions(+)
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 2 +-
arch/arm/boot/dts/qcom-ipq4019.dtsi | 156 ++++++++++++++++++++++++--
2 files changed, 146 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index ef8d8c88ed7b..418f9a022336 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -69,7 +69,7 @@
status = "ok";
};
- spi_0: spi@78b5000 {
+ spi@78b5000 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "ok";
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 2efc8a2d41a7..737097e9fb4f 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -25,7 +25,9 @@
@@ -40,8 +40,10 @@
};
aliases {
spi0 = &spi_0;
+ spi1 = &spi_1;
i2c0 = &i2c_0;
+ i2c1 = &i2c_1;
- spi0 = &spi_0;
- i2c0 = &i2c_0;
+ spi0 = &blsp1_spi1;
+ spi1 = &blsp1_spi2;
+ i2c0 = &blsp1_i2c3;
+ i2c1 = &blsp1_i2c4;
};
cpus {
@@ -190,6 +192,22 @@
@@ -120,6 +122,12 @@
};
};
+ firmware {
+ scm {
+ compatible = "qcom,scm-ipq4019";
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <1 2 0xf08>,
@@ -165,13 +173,13 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 208 0>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
};
blsp_dma: dma@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x23000>;
- interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -179,7 +187,7 @@
status = "disabled";
};
- spi_0: spi@78b5000 {
+ blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x78b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -188,10 +196,26 @@
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
@ -45,7 +92,7 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
+ status = "disabled";
+ };
+
+ spi_1: spi@78b6000 { /* BLSP1 QUP2 */
+ blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x78b6000 0x600>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@ -59,7 +106,12 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
status = "disabled";
};
@@ -202,9 +220,24 @@
- i2c_0: i2c@78b7000 {
+ blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -200,14 +224,29 @@
clock-names = "iface", "core";
#address-cells = <1>;
#size-cells = <0>;
@ -68,7 +120,7 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
status = "disabled";
};
+ i2c_1: i2c@78b8000 { /* BLSP1 QUP4 */
+ blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78b8000 0x600>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@ -84,7 +136,31 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
cryptobam: dma@8e04000 {
compatible = "qcom,bam-v1.7.0";
@@ -311,6 +344,101 @@
reg = <0x08e04000 0x20000>;
- interrupts = <GIC_SPI 207 0>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -275,7 +314,7 @@
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78af000 0x200>;
- interrupts = <0 107 0>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
@@ -287,7 +326,7 @@
serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78b0000 0x200>;
- interrupts = <0 108 0>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
@@ -309,6 +348,101 @@
reg = <0x4ab000 0x4>;
};
@ -105,7 +181,7 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
+ ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
+ 0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
@ -186,3 +262,24 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
wifi0: wifi@a000000 {
compatible = "qcom,ipq4019-wifi";
reg = <0xa000000 0x200000>;
@@ -342,7 +476,7 @@
<GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 168 IRQ_TYPE_NONE>;
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0", "msi1", "msi2", "msi3",
"msi4", "msi5", "msi6", "msi7",
"msi8", "msi9", "msi10", "msi11",
@@ -384,7 +518,7 @@
<GIC_SPI 61 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 169 IRQ_TYPE_NONE>;
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0", "msi1", "msi2", "msi3",
"msi4", "msi5", "msi6", "msi7",
"msi8", "msi9", "msi10", "msi11",
--
2.11.0

0
target/linux/ipq40xx/patches-4.14/102-ARM-dts-ipq4019-fix-PCI-range.patch → target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch
View file

0
target/linux/ipq40xx/patches-4.14/105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch → target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch
View file

23
target/linux/ipq40xx/patches-4.14/900-clk-fix.patch → target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch
View file

@ -1,7 +1,7 @@
From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001
From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Thu, 11 Mar 2018 14:41:31 +0100
Subject: [PATCH] clk: fix apss cpu overclocking
Date: Sun, 11 Mar 2018 14:41:31 +0100
Subject: [PATCH 2/2] clk: fix apss cpu overclocking
There's an interaction issue between the clk changes:"
clk: qcom: ipq4019: Add the apss cpu pll divider clock node
@ -37,10 +37,16 @@ try to overclock to 761 MHz.
Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++---
1 file changed, 31 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/gcc-ipq4019.c b/drivers/clk/qcom/gcc-ipq4019.c
index 46cb256b4aa2..4ec43f7d2e52 100644
--- a/drivers/clk/qcom/gcc-ipq4019.c
+++ b/drivers/clk/qcom/gcc-ipq4019.c
@@ -1253,6 +1253,29 @@ static const struct clk_fepll_vco gcc_fe
@@ -1253,6 +1253,29 @@ static const struct clk_fepll_vco gcc_fepll_vco = {
.reg = 0x2f020,
};
@ -70,7 +76,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
/*
* Round rate function for APSS CPU PLL Clock divider.
* It looks up the frequency table and returns the next higher frequency
@@ -1265,7 +1288,7 @@ static long clk_cpu_div_round_rate(struc
@@ -1265,7 +1288,7 @@ static long clk_cpu_div_round_rate(struct clk_hw *hw, unsigned long rate,
struct clk_hw *p_hw;
const struct freq_tbl *f;
@ -79,7 +85,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
if (!f)
return -EINVAL;
@@ -1288,7 +1311,7 @@ static int clk_cpu_div_set_rate(struct c
@@ -1288,7 +1311,7 @@ static int clk_cpu_div_set_rate(struct clk_hw *hw, unsigned long rate,
u32 mask;
int ret;
@ -96,7 +102,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
struct clk_fepll *pll = to_clk_fepll(hw);
u32 cdiv, pre_div;
u64 rate;
@@ -1335,7 +1359,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h
@@ -1335,7 +1359,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *hw,
rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2;
do_div(rate, pre_div);
@ -109,3 +115,6 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
};
static const struct clk_ops clk_regmap_cpu_div_ops = {
--
2.11.0

0
target/linux/ipq40xx/patches-4.14/865-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch → target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch
View file

0
target/linux/ipq40xx/patches-4.14/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch → target/linux/ipq40xx/patches-4.14/083-mtd-nand-add-Winbond-manufacturer-and-chip.patch
View file

80
target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch
View file

@ -1,5 +1,7 @@
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
===================================================================
--- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -15,12 +15,39 @@
*/
@ -40,9 +42,7 @@
rng@22000 {
status = "ok";
};
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -93,14 +93,6 @@
@@ -66,14 +93,6 @@
pinctrl-names = "default";
status = "ok";
cs-gpios = <&tlmm 54 0>;
@ -57,11 +57,38 @@
};
serial@78af000 {
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
@@ -19,4 +19,71 @@
@@ -102,6 +121,22 @@
status = "ok";
};
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+
usb3_ss_phy: ssphy@9a000 {
status = "ok";
};
Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
===================================================================
--- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
@@ -18,5 +18,73 @@
/ {
model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
+ compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1", "qcom,ipq4019";
+ memory {
+ device_type = "memory";
@ -69,7 +96,7 @@
+ };
+};
+
+&spi_0 {
+&blsp1_spi1 {
+ mx25l25635f@0 {
+ compatible = "mx25l25635f", "jedec,spi-nor";
+ #address-cells = <1>;
@ -131,38 +158,3 @@
+ };
+ };
};
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
@@ -18,6 +18,7 @@
/ {
model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
+ compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1", "qcom,ipq4019";
memory {
device_type = "memory";
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -121,6 +121,22 @@
status = "ok";
};
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+
usb3_ss_phy: ssphy@9a000 {
status = "ok";
};