generic: add rtl8366rb switch vlan fid support

Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24125

target/linux/generic/files/drivers/net/phy/rtl8366_smi.c

@@ -972,6 +972,52 @@ int rtl8366_sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
 }
 EXPORT_SYMBOL_GPL(rtl8366_sw_set_vlan_ports);
 
+int rtl8366_sw_get_vlan_fid(struct switch_dev *dev,
+			    const struct switch_attr *attr,
+			    struct switch_val *val)
+{
+	struct rtl8366_vlan_4k vlan4k;
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	int err;
+
+	if (!smi->ops->is_vlan_valid(smi, val->port_vlan))
+		return -EINVAL;
+
+	err = smi->ops->get_vlan_4k(smi, val->port_vlan, &vlan4k);
+	if (err)
+		return err;
+
+	val->value.i = vlan4k.fid;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_sw_get_vlan_fid);
+
+int rtl8366_sw_set_vlan_fid(struct switch_dev *dev,
+			    const struct switch_attr *attr,
+			    struct switch_val *val)
+{
+	struct rtl8366_vlan_4k vlan4k;
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	int err;
+
+	if (!smi->ops->is_vlan_valid(smi, val->port_vlan))
+		return -EINVAL;
+
+	if (val->value.i < 0 || val->value.i > attr->max)
+		return -EINVAL;
+
+	err = smi->ops->get_vlan_4k(smi, val->port_vlan, &vlan4k);
+	if (err)
+		return err;
+
+	return rtl8366_set_vlan(smi, val->port_vlan,
+				vlan4k.member,
+				vlan4k.untag,
+				val->value.i);
+}
+EXPORT_SYMBOL_GPL(rtl8366_sw_set_vlan_fid);
+
 int rtl8366_sw_get_vlan_enable(struct switch_dev *dev,
 			       const struct switch_attr *attr,
 			       struct switch_val *val)

target/linux/generic/files/drivers/net/phy/rtl8366_smi.h

@@ -120,6 +120,12 @@ int rtl8366_sw_get_port_mib(struct switch_dev *dev,
 int rtl8366_sw_get_vlan_info(struct switch_dev *dev,
 			     const struct switch_attr *attr,
 			     struct switch_val *val);
+int rtl8366_sw_get_vlan_fid(struct switch_dev *dev,
+			     const struct switch_attr *attr,
+			     struct switch_val *val);
+int rtl8366_sw_set_vlan_fid(struct switch_dev *dev,
+			     const struct switch_attr *attr,
+			     struct switch_val *val);
 int rtl8366_sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val);
 int rtl8366_sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val);
 int rtl8366_sw_get_vlan_enable(struct switch_dev *dev,

target/linux/generic/files/drivers/net/phy/rtl8366rb.c

@@ -1,5 +1,5 @@
 /*
- * Platform driver for the Realtek RTL8366S ethernet switch
+ * Platform driver for the Realtek RTL8366RB ethernet switch
  *
  * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
  * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
@@ -21,7 +21,7 @@
 #include "rtl8366_smi.h"
 
 #define RTL8366RB_DRIVER_DESC	"Realtek RTL8366RB ethernet switch driver"
-#define RTL8366RB_DRIVER_VER	"0.2.2"
+#define RTL8366RB_DRIVER_VER	"0.2.3"
 
 #define RTL8366RB_PHY_NO_MAX	4
 #define RTL8366RB_PHY_PAGE_MAX	7
@@ -182,7 +182,7 @@
 #define RTL8366RB_EB_PREIFG_MASK	(1 << RTL8366RB_EB_PREIFG_OFFSET)
 
 #define RTL8366RB_BDTH_SW_MAX		1048512
-#define RTL8366RB_BDTH_BASE		64
+#define RTL8366RB_BDTH_UNIT		64
 #define RTL8366RB_BDTH_REG_DEFAULT	16383
 
 /* QOS */
@@ -825,7 +825,7 @@ static int rtl8366rb_sw_set_port_rate_in(struct switch_dev *dev,
 		return -EINVAL;
 
 	if (val->value.i > 0 && val->value.i < RTL8366RB_BDTH_SW_MAX)
-		val->value.i = (val->value.i - 1) / RTL8366RB_BDTH_BASE;
+		val->value.i = (val->value.i - 1) / RTL8366RB_BDTH_UNIT;
 	else
 		val->value.i = RTL8366RB_BDTH_REG_DEFAULT;
 
@@ -851,7 +851,7 @@ static int rtl8366rb_sw_get_port_rate_in(struct switch_dev *dev,
 	if (data < RTL8366RB_IB_BDTH_MASK)
 		data += 1;
 
-	val->value.i = (int)data * RTL8366RB_BDTH_BASE;
+	val->value.i = (int)data * RTL8366RB_BDTH_UNIT;
 
 	return 0;
 }
@@ -870,7 +870,7 @@ static int rtl8366rb_sw_set_port_rate_out(struct switch_dev *dev,
 		(RTL8366RB_QOS_DEFAULT_PREIFG << RTL8366RB_EB_PREIFG_OFFSET));
 
 	if (val->value.i > 0 && val->value.i < RTL8366RB_BDTH_SW_MAX)
-		val->value.i = (val->value.i - 1) / RTL8366RB_BDTH_BASE;
+		val->value.i = (val->value.i - 1) / RTL8366RB_BDTH_UNIT;
 	else
 		val->value.i = RTL8366RB_BDTH_REG_DEFAULT;
 
@@ -894,7 +894,7 @@ static int rtl8366rb_sw_get_port_rate_out(struct switch_dev *dev,
 	if (data < RTL8366RB_EB_BDTH_MASK)
 		data += 1;
 
-	val->value.i = (int)data * RTL8366RB_BDTH_BASE;
+	val->value.i = (int)data * RTL8366RB_BDTH_UNIT;
 
 	return 0;
 }
@@ -1065,6 +1065,13 @@ static struct switch_attr rtl8366rb_vlan[] = {
 		.max = 1,
 		.set = NULL,
 		.get = rtl8366_sw_get_vlan_info,
+	}, {
+		.type = SWITCH_TYPE_INT,
+		.name = "fid",
+		.description = "Get/Set vlan FID",
+		.max = RTL8366RB_FIDMAX,
+		.set = rtl8366_sw_set_vlan_fid,
+		.get = rtl8366_sw_get_vlan_fid,
 	},
 };