ar71xx: Add support to Powerline ac TP-Link WPA8630

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
This commit is contained in:
Henryk Heisig 2016-10-30 17:57:27 +01:00 committed by John Crispin
parent 15a14cf166
commit 8cc0c34ef5
12 changed files with 210 additions and 2 deletions

View file

@ -638,6 +638,11 @@ wnr612-v2)
ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f" ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f" ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
;; ;;
wpa8630)
ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0"
ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1"
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
;;
wpn824n) wpn824n)
ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0" ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt" ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"

View file

@ -398,6 +398,10 @@ ar71xx_setup_interfaces()
ucidef_add_switch_port_attr "switch0" 2 led 9 ucidef_add_switch_port_attr "switch0" 2 led 9
ucidef_add_switch_port_attr "switch0" 5 led 2 ucidef_add_switch_port_attr "switch0" 5 led 2
;; ;;
wpa8630)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
;;
wpj344) wpj344)
ucidef_add_switch "switch0" \ ucidef_add_switch "switch0" \
"0@eth0" "3:lan" "2:wan" "0@eth0" "3:lan" "2:wan"

View file

@ -43,7 +43,8 @@ get_status_led() {
ap83|\ ap83|\
mr12|\ mr12|\
mr16|\ mr16|\
nbg6616) nbg6616|\
wpa8630)
status_led="$board:green:power" status_led="$board:green:power"
;; ;;
ap96) ap96)

View file

@ -90,6 +90,10 @@ case "$FIRMWARE" in
unifiac-pro) unifiac-pro)
ath10kcal_extract "EEPROM" 20480 2116 ath10kcal_extract "EEPROM" 20480 2116
;; ;;
wpa8630)
ath10kcal_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
esac esac
;; ;;
"ath10k/cal-pci-0000:01:00.0.bin") "ath10k/cal-pci-0000:01:00.0.bin")

View file

@ -1129,6 +1129,9 @@ ar71xx_board_detect() {
*"WNR1000 V2") *"WNR1000 V2")
name="wnr1000-v2" name="wnr1000-v2"
;; ;;
*WPA8630)
name="wpa8630"
;;
*WPN824N) *WPN824N)
name="wpn824n" name="wpn824n"
;; ;;

View file

@ -386,7 +386,8 @@ platform_check_image() {
tl-wr842n-v3|\ tl-wr842n-v3|\
tl-wr941nd-v5|\ tl-wr941nd-v5|\
tl-wr941nd-v6|\ tl-wr941nd-v6|\
tl-wr941nd) tl-wr941nd|\
wpa8630)
local magic_ver="0100" local magic_ver="0100"
case "$board" in case "$board" in

View file

@ -194,6 +194,7 @@ CONFIG_ATH79_MACH_WNR2000_V3=y
CONFIG_ATH79_MACH_WNR2000_V4=y CONFIG_ATH79_MACH_WNR2000_V4=y
CONFIG_ATH79_MACH_WNR2200=y CONFIG_ATH79_MACH_WNR2200=y
CONFIG_ATH79_MACH_WP543=y CONFIG_ATH79_MACH_WP543=y
CONFIG_ATH79_MACH_WPA8630=y
CONFIG_ATH79_MACH_WPE72=y CONFIG_ATH79_MACH_WPE72=y
CONFIG_ATH79_MACH_WPJ342=y CONFIG_ATH79_MACH_WPJ342=y
CONFIG_ATH79_MACH_WPJ344=y CONFIG_ATH79_MACH_WPJ344=y

View file

@ -1707,3 +1707,14 @@ config ATH79_MACH_DAP_2695_A1
select ATH79_DEV_LEDS_GPIO select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80 select ATH79_DEV_M25P80
select ATH79_DEV_WMAC select ATH79_DEV_WMAC
config ATH79_MACH_WPA8630
bool "TP-Link WPA8630 support"
select SOC_QCA956X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC

View file

@ -200,6 +200,7 @@ obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o
obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o
obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
obj-$(CONFIG_ATH79_MACH_WPA8630) += mach-wpa8630.o
obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
obj-$(CONFIG_ATH79_MACH_WPJ342) += mach-wpj342.o obj-$(CONFIG_ATH79_MACH_WPJ342) += mach-wpj342.o
obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o

View file

@ -0,0 +1,164 @@
/*
* TP-Link WPA8630 board support
*
* Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-m25p80.h"
#include "machtypes.h"
#include "pci.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-wmac.h"
#define WPA8630_KEYS_POLL_INTERVAL 20
#define WPA8630_KEYS_DEBOUNCE_INTERVAL (3 * WPA8630_KEYS_POLL_INTERVAL)
#define WPA8630_GPIO_LED_POWER 1
#define WPA8630_GPIO_LED_LAN 5
#define WPA8630_GPIO_LED_WLAN 19
#define WPA8630_GPIO_LED_WLAN5 21
#define WPA8630_GPIO_BTN_RESET 2
#define WPA8630_GPIO_BTN_RFKILL 8
#define WPA8630_GPIO_BTN_0 6
#define WPA8630_GPIO_BTN_1 7
#define WPA8630_MAC0_OFFSET 0x0000
#define WPA8630_WMAC_CALDATA_OFFSET 0x1000
#define WPA8630_PCI_CALDATA_OFFSET 0x5000
static struct flash_platform_data wpa8630_flash_data = {
.type = "s25fl064k",
};
static struct gpio_led wpa8630_leds_gpio[] __initdata = {
{
.name = "wpa8630:green:power",
.gpio = WPA8630_GPIO_LED_POWER,
.active_low = 1,
},
{
.name = "wpa8630:green:lan",
.gpio = WPA8630_GPIO_LED_LAN,
.active_low = 1,
},
{
.name = "wpa8630:green:wlan",
.gpio = WPA8630_GPIO_LED_WLAN,
.active_low = 1,
},
{
.name = "wpa8630:green:wlan5",
.gpio = WPA8630_GPIO_LED_WLAN5,
.active_low = 1,
},
};
static struct gpio_keys_button wpa8630_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
.gpio = WPA8630_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "RFKILL button",
.type = EV_KEY,
.code = KEY_RFKILL,
.debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
.gpio = WPA8630_GPIO_BTN_RFKILL,
.active_low = 1,
},
{
.desc = "LED",
.type = EV_KEY,
.debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
.gpio = WPA8630_GPIO_BTN_0,
.active_low = 1,
},
{
.desc = "Pair",
.type = EV_KEY,
.debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
.gpio = WPA8630_GPIO_BTN_1,
.active_low = 1,
},
};
/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */
static struct ar8327_pad_cfg wpa8630_qca8337_pad0_cfg = {
.mode = AR8327_PAD_MAC_SGMII,
.sgmii_delay_en = true,
};
static struct ar8327_platform_data wpa8630_qca8337_data = {
.pad0_cfg = &wpa8630_qca8337_pad0_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
};
static struct mdio_board_info wpa8630_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &wpa8630_qca8337_data,
},
};
static void __init wpa8630_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(&wpa8630_flash_data);
ath79_init_mac(ath79_eth0_data.mac_addr,
art + WPA8630_MAC0_OFFSET, 0);
platform_device_register(&ath79_mdio0_device);
mdiobus_register_board_info(wpa8630_mdio0_info,
ARRAY_SIZE(wpa8630_mdio0_info));
/* GMAC0 is connected to an AR8337 switch */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_data.phy_mask = ~BIT(4);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_register_eth(0);
ath79_register_wmac(art + WPA8630_WMAC_CALDATA_OFFSET, mac);
ap91_pci_init(art + WPA8630_PCI_CALDATA_OFFSET, NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wpa8630_leds_gpio),
wpa8630_leds_gpio);
ath79_register_gpio_keys_polled(-1, WPA8630_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wpa8630_gpio_keys),
wpa8630_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_WPA8630, "WPA8630", "TP-Link WPA8630",
wpa8630_setup);

View file

@ -258,6 +258,7 @@ enum ath79_mach_type {
ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */ ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */ ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
ATH79_MACH_WP543, /* Compex WP543 */ ATH79_MACH_WP543, /* Compex WP543 */
ATH79_MACH_WPA8630, /* TP-Link WPA8630 */
ATH79_MACH_WPE72, /* Compex WPE72 */ ATH79_MACH_WPE72, /* Compex WPE72 */
ATH79_MACH_WPJ342, /* Compex WPJ342 */ ATH79_MACH_WPJ342, /* Compex WPJ342 */
ATH79_MACH_WPJ344, /* Compex WPJ344 */ ATH79_MACH_WPJ344, /* Compex WPJ344 */

View file

@ -913,3 +913,15 @@ define Device/tl-wa7210n-v2
CONSOLE := ttyATH0,115200 CONSOLE := ttyATH0,115200
endef endef
TARGET_DEVICES += tl-wa7210n-v2 TARGET_DEVICES += tl-wa7210n-v2
define Device/wpa8630
$(Device/tplink-8mlzma)
DEVICE_TITLE := TP-LINK WPA8630
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := WPA8630
DEVICE_PROFILE := WPA8630
TPLINK_HWID := 0x86300001
MTDPARTS = spi0.0:64k(u-boot)ro,1280k(kernel),6720k(rootfs),64k(mib0)ro,64k(ART)ro,8000k@0x10000(firmware)
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -a 0x10000
endef
TARGET_DEVICES += wpa8630