ramips: add support for Zbtlink ZBT-WE2026

This patch adds support for the Zbtlink ZBT-WE2026.

Specification:
- SoC: MediaTek MT7620N (580MHz)
- RAM: 64 MiB
- Flash: 8 MiB SPI
- LAN: 4x100M
- WAN: 1x100M

Installation through bootloader webserver:
- With the power unplugged press and hold reset button.
- Plug power and hold reset button until LED starts to blink.
- Install sysupgrade image using web interface on 192.168.1.1.

Signed-off-by: Vaclav Svoboda <svoboda@neng.cz>
This commit is contained in:
Vaclav Svoboda 2017-03-15 09:37:05 +01:00 committed by Mathias Kresin
parent 443e67a459
commit 815cc2a69a
7 changed files with 119 additions and 1 deletions

View file

@ -385,6 +385,9 @@ zbt-wa05)
set_wifi_led "$board:blue:air"
set_usb_led "$board:blue:usb"
;;
zbt-we2026)
set_wifi_led "$board:green:wlan"
;;
zbt-we826)
ucidef_set_led_default "power" "power" "$board:green:power" "1"
set_wifi_led "$board:green:wifi"

View file

@ -107,6 +107,7 @@ ramips_setup_interfaces()
y1|\
youku-yk1|\
zbt-ape522ii|\
zbt-we2026|\
zbt-we826|\
zbt-wg2626|\
zbt-wg3526|\

View file

@ -238,7 +238,8 @@ get_status_led() {
status_led="$board:amber:power"
;;
whr-g300n|\
wlr-6000)
wlr-6000|\
zbt-we2026)
status_led="$board:red:power"
;;
wzr-agl300nh)

View file

@ -646,6 +646,9 @@ ramips_board_detect() {
*"ZBT-WA05")
name="zbt-wa05"
;;
*"ZBT-WE2026")
name="zbt-we2026"
;;
*"ZBT-WE826")
name="zbt-we826"
;;

View file

@ -181,6 +181,7 @@ platform_check_image() {
zbt-ape522ii|\
zbt-cpe102|\
zbt-wa05|\
zbt-we2026|\
zbt-we826|\
zbt-wg2626|\
zbt-wg3526|\

View file

@ -0,0 +1,103 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "mt7620n.dtsi"
/ {
compatible = "zbtlink,zbt-we2026", "ralink,mt7620n-soc";
model = "Zbtlink ZBT-WE2026";
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "zbt-we2026:red:power";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
wlan {
label = "zbt-we2026:green:wlan";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&gpio1 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
en25q64@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x760000>;
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "wllll";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "i2c", "spi refclk", "wled";
ralink,function = "gpio";
};
};
};

View file

@ -467,6 +467,12 @@ define Device/zbt-wa05
endef
TARGET_DEVICES += zbt-wa05
define Device/zbt-we2026
DTS := ZBT-WE2026
DEVICE_TITLE := Zbtlink ZBT-WE2026
endef
TARGET_DEVICES += zbt-we2026
define Device/zbt-we826
DTS := ZBT-WE826
IMAGE_SIZE := $(ralink_default_fw_size_16M)