ramips: initial support for Sitecom WL-351 v1 002

This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604
This commit is contained in:
Gabor Juhos 2011-12-23 14:27:16 +00:00
parent 2cb946f5b4
commit 7b1e525b56
13 changed files with 209 additions and 5 deletions

View file

@ -66,6 +66,9 @@ get_status_led() {
whr-g300n)
status_led="whr-g300n:green:router"
;;
wl-351)
status_led="wl-351:amber:power"
;;
esac
}

View file

@ -59,6 +59,7 @@ case "$FIRMWARE" in
v22rw-2x2 | \
wcr-150gn | \
whr-g300n | \
wl-351 | \
wr512-3gn)
rt2x00_eeprom_extract "factory" 0 272
;;

View file

@ -23,6 +23,13 @@ ramips_setup_interfaces()
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
wl-351)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "rtl8366rb" "1" "1"
ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
;;
rt-n15)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "rtl8366s" "1" "1"
@ -56,7 +63,8 @@ ramips_setup_macs()
argus-atp52b | \
b2c | \
nw718 | \
rt-n15)
rt-n15 | \
wl-351)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
;;

View file

@ -104,6 +104,9 @@ ramips_board_name() {
*"WHR-G300N")
name="whr-g300n"
;;
*"Sitecom WL-351 v1 002")
name="wl-351"
;;
*"WZR-AGL300NH")
name="wzr-agl300nh"
;;

View file

@ -38,5 +38,6 @@ enum ramips_mach_type {
RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */
RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */
RAMIPS_MACH_WHR_G300N, /* Buffalo WHR-G300N */
RAMIPS_MACH_WL351, /* Sitecom WL-351 v1 002 */
RAMIPS_MACH_WR512_3GN, /* SH-WR512NU/WS-WR512N1-like 3GN*/
};

View file

@ -13,6 +13,7 @@
enum {
RT305X_ESW_VLAN_CONFIG_NONE = 0,
RT305X_ESW_VLAN_CONFIG_BYPASS,
RT305X_ESW_VLAN_CONFIG_LLLLW,
RT305X_ESW_VLAN_CONFIG_WLLLL,
};
@ -20,6 +21,8 @@ enum {
struct rt305x_esw_platform_data
{
u8 vlan_config;
u32 reg_initval_fct2;
u32 reg_initval_fpa2;
};
#endif /* _RT305X_ESW_PLATFORM_H */

View file

@ -76,6 +76,11 @@ config RT305X_MACH_V22RW_2X2
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_WL351
bool "Sitecom WL-351 support"
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_WCR150GN
bool "Sparklan WCR-150GN support"
select RALINK_DEV_GPIO_BUTTONS

View file

@ -28,4 +28,4 @@ obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o
obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o
obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o
obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o
obj-$(CONFIG_RT305X_MACH_WL351) += mach-wl351.o

View file

@ -24,6 +24,7 @@
#include "devices.h"
#include <ramips_eth_platform.h>
#include <rt305x_esw_platform.h>
static struct resource rt305x_flash0_resources[] = {
{
@ -142,7 +143,12 @@ static struct resource rt305x_esw_resources[] = {
},
};
struct rt305x_esw_platform_data rt305x_esw_data;
struct rt305x_esw_platform_data rt305x_esw_data = {
.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE,
.reg_initval_fct2 = 0x00d6500c,
.reg_initval_fpa2 = 0x3f502b28,
};
static struct platform_device rt305x_esw_device = {
.name = "rt305x-esw",
.resource = rt305x_esw_resources,

View file

@ -0,0 +1,156 @@
/*
* Sitecom WL-351 v1 002 board support
*
* Copyright (C) 2011 Tobias Diedrich <ranma+openwrt@tdiedrich.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/rtl8366.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
#include "devices.h"
#define WL351_GPIO_LED_POWER_AMBER 8
#define WL351_GPIO_LED_UNPOPULATED_AMBER 12
#define WL351_GPIO_LED_UNPOPULATED_BLUE 13
#define WL351_GPIO_BUTTON_RESET 10
#define WL351_GPIO_BUTTON_WPS 0
#define WL351_BUTTONS_POLL_INTERVAL 20
static struct gpio_led wl351_leds_gpio[] __initdata = {
{
.name = "wl-351:amber:power",
.gpio = WL351_GPIO_LED_POWER_AMBER,
.active_low = 1,
}, {
.name = "wl-351:amber:unpopulated",
.gpio = WL351_GPIO_LED_UNPOPULATED_AMBER,
.active_low = 1,
}, {
.name = "wl-351:blue:unpopulated",
.gpio = WL351_GPIO_LED_UNPOPULATED_BLUE,
.active_low = 1,
}
};
static struct gpio_button wl351_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.threshold = 3,
.gpio = WL351_GPIO_BUTTON_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.threshold = 3,
.gpio = WL351_GPIO_BUTTON_WPS,
.active_low = 1,
}
};
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition wl351_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x030000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "u-boot-env",
.offset = 0x030000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "factory",
.offset = 0x040000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = 0x050000,
.size = 0x110000,
}, {
.name = "rootfs",
.offset = 0x160000,
.size = 0x230000,
}, {
.name = "user (jffs2)",
.offset = 0x3F0000,
.size = 0x010000,
}, {
.name = "firmware",
.offset = 0x050000,
.size = 0x3a0000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct physmap_flash_data wl351_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.nr_parts = ARRAY_SIZE(wl351_partitions),
.parts = wl351_partitions,
#endif
};
static struct rtl8366_platform_data wl351_switch_data = {
.gpio_sda = RT305X_GPIO_I2C_SD,
.gpio_sck = RT305X_GPIO_I2C_SCLK,
};
static struct platform_device wl351_switch = {
.name = RTL8366RB_DRIVER_NAME,
.id = -1,
.dev = {
.platform_data = &wl351_switch_data,
}
};
static void __init wl351_init(void)
{
rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
RT305X_GPIO_MODE_UART0_SHIFT) |
RT305X_GPIO_MODE_I2C |
RT305X_GPIO_MODE_SPI |
RT305X_GPIO_MODE_MDIO);
rt305x_register_flash(0, &wl351_flash_data);
ramips_register_gpio_leds(-1, ARRAY_SIZE(wl351_leds_gpio),
wl351_leds_gpio);
ramips_register_gpio_buttons(-1, WL351_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(wl351_gpio_buttons),
wl351_gpio_buttons);
// external rtl8366rb
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_BYPASS;
rt305x_esw_data.reg_initval_fct2 = 0x0002500c;
rt305x_esw_data.reg_initval_fpa2 = 0x1f003fff;
rt305x_register_ethernet();
platform_device_register(&wl351_switch);
rt305x_register_wifi();
rt305x_register_wdt();
rt305x_register_usb();
}
MIPS_MACHINE(RAMIPS_MACH_WL351, "WL-351", "Sitecom WL-351 v1 002",
wl351_init);

View file

@ -218,7 +218,7 @@ rt305x_esw_hw_init(struct rt305x_esw *esw)
(RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC3_UNTAG_EN_S)),
RT305X_ESW_REG_POC3);
rt305x_esw_wr(esw, 0x00d6500c, RT305X_ESW_REG_FCT2);
rt305x_esw_wr(esw, esw->pdata->reg_initval_fct2, RT305X_ESW_REG_FCT2);
rt305x_esw_wr(esw, 0x0008a301, RT305X_ESW_REG_SGC);
/* Setup SoC Port control register */
@ -229,7 +229,7 @@ rt305x_esw_hw_init(struct rt305x_esw *esw)
(RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
RT305X_ESW_REG_SOCPC);
rt305x_esw_wr(esw, 0x3f502b28, RT305X_ESW_REG_FPA2);
rt305x_esw_wr(esw, esw->pdata->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
rt305x_esw_wr(esw, 0x00000000, RT305X_ESW_REG_FPA);
/* Force Link/Activity on ports */
@ -277,6 +277,18 @@ rt305x_esw_hw_init(struct rt305x_esw *esw)
case RT305X_ESW_VLAN_CONFIG_NONE:
break;
case RT305X_ESW_VLAN_CONFIG_BYPASS:
/* Pass all vlan tags to all ports */
for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
rt305x_esw_set_vlan_id(esw, i, i+1);
rt305x_esw_set_vmsc(esw, i, RT305X_ESW_PORTS_ALL);
}
/* Disable VLAN TAG removal, keep aging on. */
rt305x_esw_wr(esw,
RT305X_ESW_PORTS_ALL << RT305X_ESW_POC3_ENAGING_S,
RT305X_ESW_REG_POC3);
break;
case RT305X_ESW_VLAN_CONFIG_LLLLW:
rt305x_esw_set_vlan_id(esw, 0, 1);
rt305x_esw_set_vlan_id(esw, 1, 2);

View file

@ -179,6 +179,10 @@ define Image/Build/Profile/NBG419N
$(call Image/Build/Template/GENERIC_4M,$(1),nbg-419n,NBG-419N)
endef
define Image/Build/Profile/WL351
$(call Image/Build/Template/GENERIC_4M,$(1),wl-351,WL-351)
endef
define Image/Build/Profile/NW718
$(call Image/Build/Template/NW718,$(1),nw718,NW718)
endef
@ -271,6 +275,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/HW5503G,$(1))
$(call Image/Build/Profile/MOFI35003GN,$(1))
$(call Image/Build/Profile/WR5123GN,$(1))
$(call Image/Build/Profile/WL351,$(1))
endef
endif

View file

@ -107,6 +107,7 @@ CONFIG_RT305X_MACH_RT_G32_REVB=y
CONFIG_RT305X_MACH_V22RW_2X2=y
CONFIG_RT305X_MACH_WCR150GN=y
CONFIG_RT305X_MACH_WHR_G300N=y
CONFIG_RT305X_MACH_WL351=y
CONFIG_RT305X_MACH_WR512_3GN=y
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4