brcm63xx: add Comtrend VR-3026e support

Add support for Comtrend VR-3026e v1.
The device is almost identical to the Comtrend VR-3025un.

Signed-off-by: Martin Tesar <tesarmar@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46752
This commit is contained in:
Jonas Gorski 2015-08-30 12:17:46 +00:00
parent 46dd362bde
commit 78f253f9b1
10 changed files with 267 additions and 1 deletions

View file

@ -39,6 +39,9 @@ set_state() {
vr-3025u)
status_led="VR-3025u:green:power"
;;
vr-3026e)
status_led="VR-3026e:green:power"
;;
wap-5813n)
status_led="WAP-5813n:green:power"
;;

View file

@ -95,7 +95,8 @@ fast2704v2 |\
hg655b |\
p870hw-51a_v2 |\
vr-3025un |\
vr-3025u)
vr-3025u |\
vr-3026e)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 8t"

View file

@ -30,6 +30,7 @@ case "$(brcm63xx_board_name)" in
v2500v_bb |\
vr-3025u |\
vr-3025un |\
vr-3026e |\
wap-5813n)
do_fixcrc
;;

View file

@ -102,6 +102,9 @@ brcm63xx_dt_detect() {
"Comtrend VR-3025un")
board_name="vr-3025un"
;;
"Comtrend VR-3026e")
board_name="vr-3026e"
;;
"Comtrend WAP-5813n")
board_name="wap-5813n"
;;

View file

@ -32,6 +32,7 @@ set_preinit_iface() {
v2110 |\
vr-3025un |\
vr-3025u |\
vr-3026e |\
wap-5813n)
ifname=eth0
;;

View file

@ -0,0 +1,88 @@
/dts-v1/;
#include "bcm6368.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Comtrend VR-3026e";
compatible = "comtrend,vr-3026e", "brcm,bcm6368";
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
reset {
label = "reset";
gpios = <&gpio1 2 1>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
dsl_green {
label = "VR-3026e:green:dsl";
gpios = <&gpio0 2 1>;
};
inet_green {
label = "VR-3026e:green:inet";
gpios = <&gpio0 5 0>;
};
lan1_green {
label = "VR-3026e:green:lan1";
gpios = <&gpio0 6 1>;
};
lan2_green {
label = "VR-3026e:green:lan2";
gpios = <&gpio0 7 1>;
};
lan3_green {
label = "VR-3026e:green:lan3";
gpios = <&gpio0 8 1>;
};
lan4_green {
label = "VR-3026e:green:lan4";
gpios = <&gpio0 9 1>;
};
power_green {
label = "VR-3026e:green:power";
gpios = <&gpio0 22 0>;
default-state = "on";
};
power_red {
label = "VR-3026e:red:power";
gpios = <&gpio0 24 0>;
};
inet_red {
label = "VR-3026e:red:inet";
gpios = <&gpio0 31 0>;
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
linux@10000 {
label = "linux";
reg = <0x010000 0x7e0000>;
};
nvram@7f0000 {
label = "nvram";
reg = <0x7f0000 0x010000>;
};
};

View file

@ -535,6 +535,8 @@ $(eval $(call bcm63xxCfe,CT6373,CT-6373,ct-6373,CT6373-1,6358))
$(eval $(call bcm63xxCfe,VR3025u,VR-3025u,vr-3025u,96368M-1541N,6368,--pad 16 --image-offset 0x20000 --block-size 0x20000))
# Comtrend VR-3025un
$(eval $(call bcm63xxCfe,VR3025un,VR-3025un,vr-3025un,96368M-1341N,6368,--pad 4))
# Comtrend VR-3026e
$(eval $(call bcm63xxCfe,VR3026e,VR-3026e,vr-3026e,96368MT-1341N1,6368,--pad 4))
# Comtrend WAP-5813n
$(eval $(call bcm63xxCfe,WAP5813n,WAP-5813n,wap-5813n,96369R-1231N,6368,--pad 4))
# D-Link DSL-2640B, rev B2

View file

@ -0,0 +1,79 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -2168,6 +2168,60 @@ static struct board_info __initdata boar
},
};
+static struct sprom_fixup __initdata vr3026e_fixups[] = {
+ { .offset = 97, .value = 0xfeb3 },
+ { .offset = 98, .value = 0x1618 },
+ { .offset = 99, .value = 0xfab0 },
+ { .offset = 113, .value = 0xfed1 },
+ { .offset = 114, .value = 0x1609 },
+ { .offset = 115, .value = 0xfad9 },
+};
+
+static struct board_info __initdata board_VR3026e = {
+ .name = "96368MT-1341N1",
+ .expected_cpu_id = 0x6368,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "port1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "port2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "port3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "port4",
+ },
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM43222,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ .board_fixups = vr3026e_fixups,
+ .num_board_fixups = ARRAY_SIZE(vr3026e_fixups),
+ },
+};
+
static struct b53_platform_data WAP5813n_b53_pdata = {
.alias = "eth0",
};
@@ -2472,6 +2526,7 @@ static const struct board_info __initcon
&board_P870HW51A_V2,
&board_VR3025u,
&board_VR3025un,
+ &board_VR3026e,
&board_WAP5813n,
#endif
#ifdef CONFIG_BCM63XX_CPU_63268
@@ -2572,6 +2627,7 @@ static struct of_device_id const bcm963x
{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
{ .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
{ .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+ { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
{ .compatible = "huawei,hg655b", .data = &board_HG655b, },
{ .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },

View file

@ -0,0 +1,79 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -2168,6 +2168,60 @@ static struct board_info __initdata boar
},
};
+static struct sprom_fixup __initdata vr3026e_fixups[] = {
+ { .offset = 97, .value = 0xfeb3 },
+ { .offset = 98, .value = 0x1618 },
+ { .offset = 99, .value = 0xfab0 },
+ { .offset = 113, .value = 0xfed1 },
+ { .offset = 114, .value = 0x1609 },
+ { .offset = 115, .value = 0xfad9 },
+};
+
+static struct board_info __initdata board_VR3026e = {
+ .name = "96368MT-1341N1",
+ .expected_cpu_id = 0x6368,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "port1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "port2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "port3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "port4",
+ },
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM43222,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ .board_fixups = vr3026e_fixups,
+ .num_board_fixups = ARRAY_SIZE(vr3026e_fixups),
+ },
+};
+
static struct b53_platform_data WAP5813n_b53_pdata = {
.alias = "eth0",
};
@@ -2472,6 +2526,7 @@ static const struct board_info __initcon
&board_P870HW51A_V2,
&board_VR3025u,
&board_VR3025un,
+ &board_VR3026e,
&board_WAP5813n,
#endif
#ifdef CONFIG_BCM63XX_CPU_63268
@@ -2572,6 +2627,7 @@ static struct of_device_id const bcm963x
{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
{ .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
{ .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+ { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
{ .compatible = "huawei,hg655b", .data = &board_HG655b, },
{ .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },

View file

@ -73,6 +73,15 @@ define Profile/VR3025un/Description
endef
$(eval $(call Profile,VR3025un))
define Profile/VR3026e
NAME:=Comtrend VR-3026e
PACKAGES:=kmod-b43 wpad-mini
endef
define Profile/VR3026e/Description
Package set optimized for VR-3026e.
endef
$(eval $(call Profile,VR3026e))
define Profile/WAP5813n
NAME:=Comtrend WAP-5813n
PACKAGES:=kmod-b43 wpad-mini \