brcm47xx: remove support for kernel version 3.3

SVN-Revision: 34986
This commit is contained in:
Hauke Mehrtens 2013-01-03 01:48:43 +00:00
parent 965afef317
commit 76c767f122
57 changed files with 0 additions and 9780 deletions

View file

@ -1,144 +0,0 @@
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ARPD is not set
CONFIG_B44=y
CONFIG_B44_PCI=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_BCM47XX=y
CONFIG_BCM47XX_BCMA=y
CONFIG_BCM47XX_SSB=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_DEBUG=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_NFLASH=y
CONFIG_BCMA_SFLASH=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CEVT_R4K_LIB=y
CONFIG_CFE=y
CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
CONFIG_CPU_MIPSR1=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_CSRC_R4K_LIB=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IRQ_CPU=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_KALLSYMS=y
CONFIG_LEDS_GPIO=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
CONFIG_MIPS_MT_DISABLED=y
CONFIG_MTD_BCM47XX_PARTS=y
CONFIG_MTD_BCM47XX_PFLASH=y
CONFIG_MTD_BCM47XX_SFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCM47XX=y
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_SM_COMMON is not set
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NO_EXCEPT_FILL=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SSB=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_EXTIF=y
CONFIG_SSB_DRIVER_GIGE=y
CONFIG_SSB_DRIVER_MIPS=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_EMBEDDED=y
CONFIG_SSB_PCICORE_HOSTMODE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_SERIAL=y
CONFIG_SSB_SFLASH=y
CONFIG_SSB_SPROM=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_USB_ARCH_HAS_XHCI=y
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
CONFIG_USB_SUPPORT=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_ZONE_DMA_FLAG=0

View file

@ -1,12 +0,0 @@
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -107,8 +107,7 @@ int nvram_getenv(char *name, char *val,
value = eq + 1;
if ((eq - var) == strlen(name) &&
strncmp(var, name, (eq - var)) == 0) {
- snprintf(val, val_len, "%s", value);
- return 0;
+ return snprintf(val, val_len, "%s", value);
}
}
return NVRAM_ERR_ENVNOTFOUND;

View file

@ -1,11 +0,0 @@
--- a/arch/mips/include/asm/mach-bcm47xx/nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
@@ -37,7 +37,7 @@ struct nvram_header {
extern int nvram_getenv(char *name, char *val, size_t val_len);
-static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
+static inline void nvram_parse_macaddr(char *buf, u8 macaddr[6])
{
if (strchr(buf, ':'))
sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0],

View file

@ -1,802 +0,0 @@
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,5 +3,5 @@
# under Linux.
#
-obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o
+obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -85,156 +85,7 @@ static void bcm47xx_machine_halt(void)
}
#ifdef CONFIG_BCM47XX_SSB
-#define READ_FROM_NVRAM(_outvar, name, buf) \
- if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\
- sprom->_outvar = simple_strtoul(buf, NULL, 0);
-
-#define READ_FROM_NVRAM2(_outvar, name1, name2, buf) \
- if (nvram_getprefix(prefix, name1, buf, sizeof(buf)) >= 0 || \
- nvram_getprefix(prefix, name2, buf, sizeof(buf)) >= 0)\
- sprom->_outvar = simple_strtoul(buf, NULL, 0);
-
-static inline int nvram_getprefix(const char *prefix, char *name,
- char *buf, int len)
-{
- if (prefix) {
- char key[100];
-
- snprintf(key, sizeof(key), "%s%s", prefix, name);
- return nvram_getenv(key, buf, len);
- }
-
- return nvram_getenv(name, buf, len);
-}
-
-static u32 nvram_getu32(const char *name, char *buf, int len)
-{
- int rv;
- char key[100];
- u16 var0, var1;
-
- snprintf(key, sizeof(key), "%s0", name);
- rv = nvram_getenv(key, buf, len);
- /* return 0 here so this looks like unset */
- if (rv < 0)
- return 0;
- var0 = simple_strtoul(buf, NULL, 0);
-
- snprintf(key, sizeof(key), "%s1", name);
- rv = nvram_getenv(key, buf, len);
- if (rv < 0)
- return 0;
- var1 = simple_strtoul(buf, NULL, 0);
- return var1 << 16 | var0;
-}
-
-static void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix)
-{
- char buf[100];
- u32 boardflags;
-
- memset(sprom, 0, sizeof(struct ssb_sprom));
-
- sprom->revision = 1; /* Fallback: Old hardware does not define this. */
- READ_FROM_NVRAM(revision, "sromrev", buf);
- if (nvram_getprefix(prefix, "il0macaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getprefix(prefix, "macaddr", buf, sizeof(buf)) >= 0)
- nvram_parse_macaddr(buf, sprom->il0mac);
- if (nvram_getprefix(prefix, "et0macaddr", buf, sizeof(buf)) >= 0)
- nvram_parse_macaddr(buf, sprom->et0mac);
- if (nvram_getprefix(prefix, "et1macaddr", buf, sizeof(buf)) >= 0)
- nvram_parse_macaddr(buf, sprom->et1mac);
- READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
- READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
- READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf);
- READ_FROM_NVRAM(et1mdcport, "et1mdcport", buf);
- READ_FROM_NVRAM(board_rev, "boardrev", buf);
- READ_FROM_NVRAM(country_code, "ccode", buf);
- READ_FROM_NVRAM(ant_available_a, "aa5g", buf);
- READ_FROM_NVRAM(ant_available_bg, "aa2g", buf);
- READ_FROM_NVRAM(pa0b0, "pa0b0", buf);
- READ_FROM_NVRAM(pa0b1, "pa0b1", buf);
- READ_FROM_NVRAM(pa0b2, "pa0b2", buf);
- READ_FROM_NVRAM(pa1b0, "pa1b0", buf);
- READ_FROM_NVRAM(pa1b1, "pa1b1", buf);
- READ_FROM_NVRAM(pa1b2, "pa1b2", buf);
- READ_FROM_NVRAM(pa1lob0, "pa1lob0", buf);
- READ_FROM_NVRAM(pa1lob2, "pa1lob1", buf);
- READ_FROM_NVRAM(pa1lob1, "pa1lob2", buf);
- READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf);
- READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf);
- READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf);
- READ_FROM_NVRAM2(gpio0, "ledbh0", "wl0gpio0", buf);
- READ_FROM_NVRAM2(gpio1, "ledbh1", "wl0gpio1", buf);
- READ_FROM_NVRAM2(gpio2, "ledbh2", "wl0gpio2", buf);
- READ_FROM_NVRAM2(gpio3, "ledbh3", "wl0gpio3", buf);
- READ_FROM_NVRAM2(maxpwr_bg, "maxp2ga0", "pa0maxpwr", buf);
- READ_FROM_NVRAM2(maxpwr_al, "maxp5gla0", "pa1lomaxpwr", buf);
- READ_FROM_NVRAM2(maxpwr_a, "maxp5ga0", "pa1maxpwr", buf);
- READ_FROM_NVRAM2(maxpwr_ah, "maxp5gha0", "pa1himaxpwr", buf);
- READ_FROM_NVRAM2(itssi_bg, "itt5ga0", "pa0itssit", buf);
- READ_FROM_NVRAM2(itssi_a, "itt2ga0", "pa1itssit", buf);
- READ_FROM_NVRAM(tri2g, "tri2g", buf);
- READ_FROM_NVRAM(tri5gl, "tri5gl", buf);
- READ_FROM_NVRAM(tri5g, "tri5g", buf);
- READ_FROM_NVRAM(tri5gh, "tri5gh", buf);
- READ_FROM_NVRAM(txpid2g[0], "txpid2ga0", buf);
- READ_FROM_NVRAM(txpid2g[1], "txpid2ga1", buf);
- READ_FROM_NVRAM(txpid2g[2], "txpid2ga2", buf);
- READ_FROM_NVRAM(txpid2g[3], "txpid2ga3", buf);
- READ_FROM_NVRAM(txpid5g[0], "txpid5ga0", buf);
- READ_FROM_NVRAM(txpid5g[1], "txpid5ga1", buf);
- READ_FROM_NVRAM(txpid5g[2], "txpid5ga2", buf);
- READ_FROM_NVRAM(txpid5g[3], "txpid5ga3", buf);
- READ_FROM_NVRAM(txpid5gl[0], "txpid5gla0", buf);
- READ_FROM_NVRAM(txpid5gl[1], "txpid5gla1", buf);
- READ_FROM_NVRAM(txpid5gl[2], "txpid5gla2", buf);
- READ_FROM_NVRAM(txpid5gl[3], "txpid5gla3", buf);
- READ_FROM_NVRAM(txpid5gh[0], "txpid5gha0", buf);
- READ_FROM_NVRAM(txpid5gh[1], "txpid5gha1", buf);
- READ_FROM_NVRAM(txpid5gh[2], "txpid5gha2", buf);
- READ_FROM_NVRAM(txpid5gh[3], "txpid5gha3", buf);
- READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf);
- READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf);
- READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf);
- READ_FROM_NVRAM(rssismc2g, "rssismc2g", buf);
- READ_FROM_NVRAM(rssismf2g, "rssismf2g", buf);
- READ_FROM_NVRAM(bxa2g, "bxa2g", buf);
- READ_FROM_NVRAM(rssisav5g, "rssisav5g", buf);
- READ_FROM_NVRAM(rssismc5g, "rssismc5g", buf);
- READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf);
- READ_FROM_NVRAM(bxa5g, "bxa5g", buf);
- READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf);
-
- sprom->ofdm2gpo = nvram_getu32("ofdm2gpo", buf, sizeof(buf));
- sprom->ofdm5glpo = nvram_getu32("ofdm5glpo", buf, sizeof(buf));
- sprom->ofdm5gpo = nvram_getu32("ofdm5gpo", buf, sizeof(buf));
- sprom->ofdm5ghpo = nvram_getu32("ofdm5ghpo", buf, sizeof(buf));
-
- READ_FROM_NVRAM(antenna_gain.ghz24.a0, "ag0", buf);
- READ_FROM_NVRAM(antenna_gain.ghz24.a1, "ag1", buf);
- READ_FROM_NVRAM(antenna_gain.ghz24.a2, "ag2", buf);
- READ_FROM_NVRAM(antenna_gain.ghz24.a3, "ag3", buf);
- memcpy(&sprom->antenna_gain.ghz5, &sprom->antenna_gain.ghz24,
- sizeof(sprom->antenna_gain.ghz5));
-
- if (nvram_getprefix(prefix, "boardflags", buf, sizeof(buf)) >= 0) {
- boardflags = simple_strtoul(buf, NULL, 0);
- if (boardflags) {
- sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
- sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
- }
- }
- if (nvram_getprefix(prefix, "boardflags2", buf, sizeof(buf)) >= 0) {
- boardflags = simple_strtoul(buf, NULL, 0);
- if (boardflags) {
- sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
- sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16;
- }
- }
-}
-
-int bcm47xx_get_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+static int bcm47xx_get_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
{
char prefix[10];
--- /dev/null
+++ b/arch/mips/bcm47xx/sprom.c
@@ -0,0 +1,620 @@
+/*
+ * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006 Michael Buesch <m@bues.ch>
+ * Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
+ * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <bcm47xx.h>
+#include <nvram.h>
+
+static void create_key(const char *prefix, const char *postfix,
+ const char *name, char *buf, int len)
+{
+ if (prefix && postfix)
+ snprintf(buf, len, "%s%s%s", prefix, name, postfix);
+ else if (prefix)
+ snprintf(buf, len, "%s%s", prefix, name);
+ else if (postfix)
+ snprintf(buf, len, "%s%s", name, postfix);
+ else
+ snprintf(buf, len, "%s", name);
+}
+
+#define NVRAM_READ_VAL(type) \
+static void nvram_read_ ## type (const char *prefix, \
+ const char *postfix, const char *name, \
+ type *val, type allset) \
+{ \
+ char buf[100]; \
+ char key[40]; \
+ int err; \
+ type var; \
+ \
+ create_key(prefix, postfix, name, key, sizeof(key)); \
+ \
+ err = nvram_getenv(key, buf, sizeof(buf)); \
+ if (err < 0) \
+ return; \
+ err = kstrto ## type (buf, 0, &var); \
+ if (err) { \
+ pr_warn("can not parse nvram name %s with value %s" \
+ " got %i", key, buf, err); \
+ return; \
+ } \
+ if (allset && var == allset) \
+ return; \
+ *val = var; \
+}
+
+NVRAM_READ_VAL(u8)
+NVRAM_READ_VAL(s8)
+NVRAM_READ_VAL(u16)
+NVRAM_READ_VAL(u32)
+
+#undef NVRAM_READ_VAL
+
+static void nvram_read_u32_2(const char *prefix, const char *name,
+ u16 *val_lo, u16 *val_hi)
+{
+ char buf[100];
+ char key[40];
+ int err;
+ u32 val;
+
+ create_key(prefix, NULL, name, key, sizeof(key));
+
+ err = nvram_getenv(key, buf, sizeof(buf));
+ if (err < 0)
+ return;
+ err = kstrtou32(buf, 0, &val);
+ if (err) {
+ pr_warn("can not parse nvram name %s with value %s got %i",
+ key, buf, err);
+ return;
+ }
+ *val_lo = (val & 0x0000FFFFU);
+ *val_hi = (val & 0xFFFF0000U) >> 16;
+}
+
+static void nvram_read_leddc(const char *prefix, const char *name,
+ u8 *leddc_on_time, u8 *leddc_off_time)
+{
+ char buf[100];
+ char key[40];
+ int err;
+ u32 val;
+
+ create_key(prefix, NULL, name, key, sizeof(key));
+
+ err = nvram_getenv(key, buf, sizeof(buf));
+ if (err < 0)
+ return;
+ err = kstrtou32(buf, 0, &val);
+ if (err) {
+ pr_warn("can not parse nvram name %s with value %s got %i",
+ key, buf, err);
+ return;
+ }
+
+ if (val == 0xffff || val == 0xffffffff)
+ return;
+
+ *leddc_on_time = val & 0xff;
+ *leddc_off_time = (val >> 16) & 0xff;
+}
+
+static void nvram_read_macaddr(const char *prefix, const char *name,
+ u8 (*val)[6])
+{
+ char buf[100];
+ char key[40];
+ int err;
+
+ create_key(prefix, NULL, name, key, sizeof(key));
+
+ err = nvram_getenv(key, buf, sizeof(buf));
+ if (err < 0)
+ return;
+ nvram_parse_macaddr(buf, *val);
+}
+
+static void nvram_read_alpha2(const char *prefix, const char *name,
+ char (*val)[2])
+{
+ char buf[10];
+ char key[40];
+ int err;
+
+ create_key(prefix, NULL, name, key, sizeof(key));
+
+ err = nvram_getenv(key, buf, sizeof(buf));
+ if (err < 0)
+ return;
+ if (buf[0] == '0')
+ return;
+ if (strlen(buf) > 2) {
+ pr_warn("alpha2 is too long %s", buf);
+ return;
+ }
+ memcpy(val, buf, sizeof(val));
+}
+
+static void bcm47xx_fill_sprom_r1234589(struct ssb_sprom *sprom,
+ const char *prefix)
+{
+ nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0);
+ nvram_read_u16(prefix, NULL, "boardnum", &sprom->board_num, 0);
+ nvram_read_u8(prefix, NULL, "ledbh0", &sprom->gpio0, 0xff);
+ nvram_read_u8(prefix, NULL, "ledbh1", &sprom->gpio1, 0xff);
+ nvram_read_u8(prefix, NULL, "ledbh2", &sprom->gpio2, 0xff);
+ nvram_read_u8(prefix, NULL, "ledbh3", &sprom->gpio3, 0xff);
+ nvram_read_u8(prefix, NULL, "aa2g", &sprom->ant_available_bg, 0);
+ nvram_read_u8(prefix, NULL, "aa5g", &sprom->ant_available_a, 0);
+ nvram_read_s8(prefix, NULL, "ag0", &sprom->antenna_gain.a0, 0);
+ nvram_read_s8(prefix, NULL, "ag1", &sprom->antenna_gain.a1, 0);
+ nvram_read_alpha2(prefix, "ccode", &sprom->alpha2);
+}
+
+static void bcm47xx_fill_sprom_r12389(struct ssb_sprom *sprom,
+ const char *prefix)
+{
+ nvram_read_u16(prefix, NULL, "pa0b0", &sprom->pa0b0, 0);
+ nvram_read_u16(prefix, NULL, "pa0b1", &sprom->pa0b1, 0);
+ nvram_read_u16(prefix, NULL, "pa0b2", &sprom->pa0b2, 0);
+ nvram_read_u8(prefix, NULL, "pa0itssit", &sprom->itssi_bg, 0);
+ nvram_read_u8(prefix, NULL, "pa0maxpwr", &sprom->maxpwr_bg, 0);
+ nvram_read_u16(prefix, NULL, "pa1b0", &sprom->pa1b0, 0);
+ nvram_read_u16(prefix, NULL, "pa1b1", &sprom->pa1b1, 0);
+ nvram_read_u16(prefix, NULL, "pa1b2", &sprom->pa1b2, 0);
+ nvram_read_u8(prefix, NULL, "pa1itssit", &sprom->itssi_a, 0);
+ nvram_read_u8(prefix, NULL, "pa1maxpwr", &sprom->maxpwr_a, 0);
+}
+
+static void bcm47xx_fill_sprom_r1(struct ssb_sprom *sprom, const char *prefix)
+{
+ nvram_read_u16(prefix, NULL, "boardflags", &sprom->boardflags_lo, 0);
+ nvram_read_u8(prefix, NULL, "cc", &sprom->country_code, 0);
+}
+
+static void bcm47xx_fill_sprom_r2389(struct ssb_sprom *sprom,
+ const char *prefix)
+{
+ nvram_read_u8(prefix, NULL, "opo", &sprom->opo, 0);
+ nvram_read_u16(prefix, NULL, "pa1lob0", &sprom->pa1lob0, 0);
+ nvram_read_u16(prefix, NULL, "pa1lob1", &sprom->pa1lob1, 0);
+ nvram_read_u16(prefix, NULL, "pa1lob2", &sprom->pa1lob2, 0);
+ nvram_read_u16(prefix, NULL, "pa1hib0", &sprom->pa1hib0, 0);
+ nvram_read_u16(prefix, NULL, "pa1hib1", &sprom->pa1hib1, 0);
+ nvram_read_u16(prefix, NULL, "pa1hib2", &sprom->pa1hib2, 0);
+ nvram_read_u8(prefix, NULL, "pa1lomaxpwr", &sprom->maxpwr_al, 0);
+ nvram_read_u8(prefix, NULL, "pa1himaxpwr", &sprom->maxpwr_ah, 0);
+}
+
+static void bcm47xx_fill_sprom_r2(struct ssb_sprom *sprom, const char *prefix)
+{
+ nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo,
+ &sprom->boardflags_hi);
+ nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0);
+}
+
+static void bcm47xx_fill_sprom_r389(struct ssb_sprom *sprom, const char *prefix)
+{
+ nvram_read_u8(prefix, NULL, "bxa2g", &sprom->bxa2g, 0);
+ nvram_read_u8(prefix, NULL, "rssisav2g", &sprom->rssisav2g, 0);
+ nvram_read_u8(prefix, NULL, "rssismc2g", &sprom->rssismc2g, 0);
+ nvram_read_u8(prefix, NULL, "rssismf2g", &sprom->rssismf2g, 0);
+ nvram_read_u8(prefix, NULL, "bxa5g", &sprom->bxa5g, 0);
+ nvram_read_u8(prefix, NULL, "rssisav5g", &sprom->rssisav5g, 0);
+ nvram_read_u8(prefix, NULL, "rssismc5g", &sprom->rssismc5g, 0);
+ nvram_read_u8(prefix, NULL, "rssismf5g", &sprom->rssismf5g, 0);
+ nvram_read_u8(prefix, NULL, "tri2g", &sprom->tri2g, 0);
+ nvram_read_u8(prefix, NULL, "tri5g", &sprom->tri5g, 0);
+ nvram_read_u8(prefix, NULL, "tri5gl", &sprom->tri5gl, 0);
+ nvram_read_u8(prefix, NULL, "tri5gh", &sprom->tri5gh, 0);
+ nvram_read_s8(prefix, NULL, "rxpo2g", &sprom->rxpo2g, 0);
+ nvram_read_s8(prefix, NULL, "rxpo5g", &sprom->rxpo5g, 0);
+}
+
+static void bcm47xx_fill_sprom_r3(struct ssb_sprom *sprom, const char *prefix)
+{
+ nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo,
+ &sprom->boardflags_hi);
+ nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0);
+ nvram_read_u8(prefix, NULL, "regrev", &sprom->regrev, 0);
+ nvram_read_leddc(prefix, "leddc", &sprom->leddc_on_time,
+ &sprom->leddc_off_time);
+}
+
+static void bcm47xx_fill_sprom_r4589(struct ssb_sprom *sprom,
+ const char *prefix)
+{
+ nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo,
+ &sprom->boardflags_hi);
+ nvram_read_u32_2(prefix, "boardflags2", &sprom->boardflags2_lo,
+ &sprom->boardflags2_hi);
+ nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0);
+ nvram_read_u8(prefix, NULL, "regrev", &sprom->regrev, 0);
+ nvram_read_s8(prefix, NULL, "ag2", &sprom->antenna_gain.a2, 0);
+ nvram_read_s8(prefix, NULL, "ag3", &sprom->antenna_gain.a3, 0);
+ nvram_read_u8(prefix, NULL, "txchain", &sprom->txchain, 0xf);
+ nvram_read_u8(prefix, NULL, "rxchain", &sprom->rxchain, 0xf);
+ nvram_read_u8(prefix, NULL, "antswitch", &sprom->antswitch, 0xff);
+ nvram_read_leddc(prefix, "leddc", &sprom->leddc_on_time,
+ &sprom->leddc_off_time);
+}
+
+static void bcm47xx_fill_sprom_r458(struct ssb_sprom *sprom, const char *prefix)
+{
+ nvram_read_u16(prefix, NULL, "cck2gpo", &sprom->cck2gpo, 0);
+ nvram_read_u32(prefix, NULL, "ofdm2gpo", &sprom->ofdm2gpo, 0);
+ nvram_read_u32(prefix, NULL, "ofdm5gpo", &sprom->ofdm5gpo, 0);
+ nvram_read_u32(prefix, NULL, "ofdm5glpo", &sprom->ofdm5glpo, 0);
+ nvram_read_u32(prefix, NULL, "ofdm5ghpo", &sprom->ofdm5ghpo, 0);
+ nvram_read_u16(prefix, NULL, "cddpo", &sprom->cddpo, 0);
+ nvram_read_u16(prefix, NULL, "stbcpo", &sprom->stbcpo, 0);
+ nvram_read_u16(prefix, NULL, "bw40po", &sprom->bw40po, 0);
+ nvram_read_u16(prefix, NULL, "bwduppo", &sprom->bwduppo, 0);
+ nvram_read_u16(prefix, NULL, "mcs2gpo0", &sprom->mcs2gpo[0], 0);
+ nvram_read_u16(prefix, NULL, "mcs2gpo1", &sprom->mcs2gpo[1], 0);
+ nvram_read_u16(prefix, NULL, "mcs2gpo2", &sprom->mcs2gpo[2], 0);
+ nvram_read_u16(prefix, NULL, "mcs2gpo3", &sprom->mcs2gpo[3], 0);
+ nvram_read_u16(prefix, NULL, "mcs2gpo4", &sprom->mcs2gpo[4], 0);
+ nvram_read_u16(prefix, NULL, "mcs2gpo5", &sprom->mcs2gpo[5], 0);
+ nvram_read_u16(prefix, NULL, "mcs2gpo6", &sprom->mcs2gpo[6], 0);
+ nvram_read_u16(prefix, NULL, "mcs2gpo7", &sprom->mcs2gpo[7], 0);
+ nvram_read_u16(prefix, NULL, "mcs5gpo0", &sprom->mcs5gpo[0], 0);
+ nvram_read_u16(prefix, NULL, "mcs5gpo1", &sprom->mcs5gpo[1], 0);
+ nvram_read_u16(prefix, NULL, "mcs5gpo2", &sprom->mcs5gpo[2], 0);
+ nvram_read_u16(prefix, NULL, "mcs5gpo3", &sprom->mcs5gpo[3], 0);
+ nvram_read_u16(prefix, NULL, "mcs5gpo4", &sprom->mcs5gpo[4], 0);
+ nvram_read_u16(prefix, NULL, "mcs5gpo5", &sprom->mcs5gpo[5], 0);
+ nvram_read_u16(prefix, NULL, "mcs5gpo6", &sprom->mcs5gpo[6], 0);
+ nvram_read_u16(prefix, NULL, "mcs5gpo7", &sprom->mcs5gpo[7], 0);
+ nvram_read_u16(prefix, NULL, "mcs5glpo0", &sprom->mcs5glpo[0], 0);
+ nvram_read_u16(prefix, NULL, "mcs5glpo1", &sprom->mcs5glpo[1], 0);
+ nvram_read_u16(prefix, NULL, "mcs5glpo2", &sprom->mcs5glpo[2], 0);
+ nvram_read_u16(prefix, NULL, "mcs5glpo3", &sprom->mcs5glpo[3], 0);
+ nvram_read_u16(prefix, NULL, "mcs5glpo4", &sprom->mcs5glpo[4], 0);
+ nvram_read_u16(prefix, NULL, "mcs5glpo5", &sprom->mcs5glpo[5], 0);
+ nvram_read_u16(prefix, NULL, "mcs5glpo6", &sprom->mcs5glpo[6], 0);
+ nvram_read_u16(prefix, NULL, "mcs5glpo7", &sprom->mcs5glpo[7], 0);
+ nvram_read_u16(prefix, NULL, "mcs5ghpo0", &sprom->mcs5ghpo[0], 0);
+ nvram_read_u16(prefix, NULL, "mcs5ghpo1", &sprom->mcs5ghpo[1], 0);
+ nvram_read_u16(prefix, NULL, "mcs5ghpo2", &sprom->mcs5ghpo[2], 0);
+ nvram_read_u16(prefix, NULL, "mcs5ghpo3", &sprom->mcs5ghpo[3], 0);
+ nvram_read_u16(prefix, NULL, "mcs5ghpo4", &sprom->mcs5ghpo[4], 0);
+ nvram_read_u16(prefix, NULL, "mcs5ghpo5", &sprom->mcs5ghpo[5], 0);
+ nvram_read_u16(prefix, NULL, "mcs5ghpo6", &sprom->mcs5ghpo[6], 0);
+ nvram_read_u16(prefix, NULL, "mcs5ghpo7", &sprom->mcs5ghpo[7], 0);
+}
+
+static void bcm47xx_fill_sprom_r45(struct ssb_sprom *sprom, const char *prefix)
+{
+ nvram_read_u8(prefix, NULL, "txpid2ga0", &sprom->txpid2g[0], 0);
+ nvram_read_u8(prefix, NULL, "txpid2ga1", &sprom->txpid2g[1], 0);
+ nvram_read_u8(prefix, NULL, "txpid2ga2", &sprom->txpid2g[2], 0);
+ nvram_read_u8(prefix, NULL, "txpid2ga3", &sprom->txpid2g[3], 0);
+ nvram_read_u8(prefix, NULL, "txpid5ga0", &sprom->txpid5g[0], 0);
+ nvram_read_u8(prefix, NULL, "txpid5ga1", &sprom->txpid5g[1], 0);
+ nvram_read_u8(prefix, NULL, "txpid5ga2", &sprom->txpid5g[2], 0);
+ nvram_read_u8(prefix, NULL, "txpid5ga3", &sprom->txpid5g[3], 0);
+ nvram_read_u8(prefix, NULL, "txpid5gla0", &sprom->txpid5gl[0], 0);
+ nvram_read_u8(prefix, NULL, "txpid5gla1", &sprom->txpid5gl[1], 0);
+ nvram_read_u8(prefix, NULL, "txpid5gla2", &sprom->txpid5gl[2], 0);
+ nvram_read_u8(prefix, NULL, "txpid5gla3", &sprom->txpid5gl[3], 0);
+ nvram_read_u8(prefix, NULL, "txpid5gha0", &sprom->txpid5gh[0], 0);
+ nvram_read_u8(prefix, NULL, "txpid5gha1", &sprom->txpid5gh[1], 0);
+ nvram_read_u8(prefix, NULL, "txpid5gha2", &sprom->txpid5gh[2], 0);
+ nvram_read_u8(prefix, NULL, "txpid5gha3", &sprom->txpid5gh[3], 0);
+}
+
+static void bcm47xx_fill_sprom_r89(struct ssb_sprom *sprom, const char *prefix)
+{
+ nvram_read_u8(prefix, NULL, "tssipos2g", &sprom->fem.ghz2.tssipos, 0);
+ nvram_read_u8(prefix, NULL, "extpagain2g",
+ &sprom->fem.ghz2.extpa_gain, 0);
+ nvram_read_u8(prefix, NULL, "pdetrange2g",
+ &sprom->fem.ghz2.pdet_range, 0);
+ nvram_read_u8(prefix, NULL, "triso2g", &sprom->fem.ghz2.tr_iso, 0);
+ nvram_read_u8(prefix, NULL, "antswctl2g", &sprom->fem.ghz2.antswlut, 0);
+ nvram_read_u8(prefix, NULL, "tssipos5g", &sprom->fem.ghz5.tssipos, 0);
+ nvram_read_u8(prefix, NULL, "extpagain5g",
+ &sprom->fem.ghz5.extpa_gain, 0);
+ nvram_read_u8(prefix, NULL, "pdetrange5g",
+ &sprom->fem.ghz5.pdet_range, 0);
+ nvram_read_u8(prefix, NULL, "triso5g", &sprom->fem.ghz5.tr_iso, 0);
+ nvram_read_u8(prefix, NULL, "antswctl5g", &sprom->fem.ghz5.antswlut, 0);
+ nvram_read_u8(prefix, NULL, "tempthresh", &sprom->tempthresh, 0);
+ nvram_read_u8(prefix, NULL, "tempoffset", &sprom->tempoffset, 0);
+ nvram_read_u16(prefix, NULL, "rawtempsense", &sprom->rawtempsense, 0);
+ nvram_read_u8(prefix, NULL, "measpower", &sprom->measpower, 0);
+ nvram_read_u8(prefix, NULL, "tempsense_slope",
+ &sprom->tempsense_slope, 0);
+ nvram_read_u8(prefix, NULL, "tempcorrx", &sprom->tempcorrx, 0);
+ nvram_read_u8(prefix, NULL, "tempsense_option",
+ &sprom->tempsense_option, 0);
+ nvram_read_u8(prefix, NULL, "freqoffset_corr",
+ &sprom->freqoffset_corr, 0);
+ nvram_read_u8(prefix, NULL, "iqcal_swp_dis", &sprom->iqcal_swp_dis, 0);
+ nvram_read_u8(prefix, NULL, "hw_iqcal_en", &sprom->hw_iqcal_en, 0);
+ nvram_read_u8(prefix, NULL, "elna2g", &sprom->elna2g, 0);
+ nvram_read_u8(prefix, NULL, "elna5g", &sprom->elna5g, 0);
+ nvram_read_u8(prefix, NULL, "phycal_tempdelta",
+ &sprom->phycal_tempdelta, 0);
+ nvram_read_u8(prefix, NULL, "temps_period", &sprom->temps_period, 0);
+ nvram_read_u8(prefix, NULL, "temps_hysteresis",
+ &sprom->temps_hysteresis, 0);
+ nvram_read_u8(prefix, NULL, "measpower1", &sprom->measpower1, 0);
+ nvram_read_u8(prefix, NULL, "measpower2", &sprom->measpower2, 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr2ga0",
+ &sprom->rxgainerr2ga[0], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr2ga1",
+ &sprom->rxgainerr2ga[1], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr2ga2",
+ &sprom->rxgainerr2ga[2], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr5gla0",
+ &sprom->rxgainerr5gla[0], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr5gla1",
+ &sprom->rxgainerr5gla[1], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr5gla2",
+ &sprom->rxgainerr5gla[2], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr5gma0",
+ &sprom->rxgainerr5gma[0], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr5gma1",
+ &sprom->rxgainerr5gma[1], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr5gma2",
+ &sprom->rxgainerr5gma[2], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr5gha0",
+ &sprom->rxgainerr5gha[0], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr5gha1",
+ &sprom->rxgainerr5gha[1], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr5gha2",
+ &sprom->rxgainerr5gha[2], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr5gua0",
+ &sprom->rxgainerr5gua[0], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr5gua1",
+ &sprom->rxgainerr5gua[1], 0);
+ nvram_read_u8(prefix, NULL, "rxgainerr5gua2",
+ &sprom->rxgainerr5gua[2], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl2ga0", &sprom->noiselvl2ga[0], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl2ga1", &sprom->noiselvl2ga[1], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl2ga2", &sprom->noiselvl2ga[2], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl5gla0",
+ &sprom->noiselvl5gla[0], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl5gla1",
+ &sprom->noiselvl5gla[1], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl5gla2",
+ &sprom->noiselvl5gla[2], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl5gma0",
+ &sprom->noiselvl5gma[0], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl5gma1",
+ &sprom->noiselvl5gma[1], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl5gma2",
+ &sprom->noiselvl5gma[2], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl5gha0",
+ &sprom->noiselvl5gha[0], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl5gha1",
+ &sprom->noiselvl5gha[1], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl5gha2",
+ &sprom->noiselvl5gha[2], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl5gua0",
+ &sprom->noiselvl5gua[0], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl5gua1",
+ &sprom->noiselvl5gua[1], 0);
+ nvram_read_u8(prefix, NULL, "noiselvl5gua2",
+ &sprom->noiselvl5gua[2], 0);
+ nvram_read_u8(prefix, NULL, "pcieingress_war",
+ &sprom->pcieingress_war, 0);
+}
+
+static void bcm47xx_fill_sprom_r9(struct ssb_sprom *sprom, const char *prefix)
+{
+ nvram_read_u16(prefix, NULL, "cckbw202gpo", &sprom->cckbw202gpo, 0);
+ nvram_read_u16(prefix, NULL, "cckbw20ul2gpo", &sprom->cckbw20ul2gpo, 0);
+ nvram_read_u32(prefix, NULL, "legofdmbw202gpo",
+ &sprom->legofdmbw202gpo, 0);
+ nvram_read_u32(prefix, NULL, "legofdmbw20ul2gpo",
+ &sprom->legofdmbw20ul2gpo, 0);
+ nvram_read_u32(prefix, NULL, "legofdmbw205glpo",
+ &sprom->legofdmbw205glpo, 0);
+ nvram_read_u32(prefix, NULL, "legofdmbw20ul5glpo",
+ &sprom->legofdmbw20ul5glpo, 0);
+ nvram_read_u32(prefix, NULL, "legofdmbw205gmpo",
+ &sprom->legofdmbw205gmpo, 0);
+ nvram_read_u32(prefix, NULL, "legofdmbw20ul5gmpo",
+ &sprom->legofdmbw20ul5gmpo, 0);
+ nvram_read_u32(prefix, NULL, "legofdmbw205ghpo",
+ &sprom->legofdmbw205ghpo, 0);
+ nvram_read_u32(prefix, NULL, "legofdmbw20ul5ghpo",
+ &sprom->legofdmbw20ul5ghpo, 0);
+ nvram_read_u32(prefix, NULL, "mcsbw202gpo", &sprom->mcsbw202gpo, 0);
+ nvram_read_u32(prefix, NULL, "mcsbw20ul2gpo", &sprom->mcsbw20ul2gpo, 0);
+ nvram_read_u32(prefix, NULL, "mcsbw402gpo", &sprom->mcsbw402gpo, 0);
+ nvram_read_u32(prefix, NULL, "mcsbw205glpo", &sprom->mcsbw205glpo, 0);
+ nvram_read_u32(prefix, NULL, "mcsbw20ul5glpo",
+ &sprom->mcsbw20ul5glpo, 0);
+ nvram_read_u32(prefix, NULL, "mcsbw405glpo", &sprom->mcsbw405glpo, 0);
+ nvram_read_u32(prefix, NULL, "mcsbw205gmpo", &sprom->mcsbw205gmpo, 0);
+ nvram_read_u32(prefix, NULL, "mcsbw20ul5gmpo",
+ &sprom->mcsbw20ul5gmpo, 0);
+ nvram_read_u32(prefix, NULL, "mcsbw405gmpo", &sprom->mcsbw405gmpo, 0);
+ nvram_read_u32(prefix, NULL, "mcsbw205ghpo", &sprom->mcsbw205ghpo, 0);
+ nvram_read_u32(prefix, NULL, "mcsbw20ul5ghpo",
+ &sprom->mcsbw20ul5ghpo, 0);
+ nvram_read_u32(prefix, NULL, "mcsbw405ghpo", &sprom->mcsbw405ghpo, 0);
+ nvram_read_u16(prefix, NULL, "mcs32po", &sprom->mcs32po, 0);
+ nvram_read_u16(prefix, NULL, "legofdm40duppo",
+ &sprom->legofdm40duppo, 0);
+ nvram_read_u8(prefix, NULL, "sar2g", &sprom->sar2g, 0);
+ nvram_read_u8(prefix, NULL, "sar5g", &sprom->sar5g, 0);
+}
+
+static void bcm47xx_fill_sprom_path_r4589(struct ssb_sprom *sprom,
+ const char *prefix)
+{
+ char postfix[2];
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
+ struct ssb_sprom_core_pwr_info *pwr_info = &sprom->core_pwr_info[i];
+ snprintf(postfix, sizeof(postfix), "%i", i);
+ nvram_read_u8(prefix, postfix, "maxp2ga",
+ &pwr_info->maxpwr_2g, 0);
+ nvram_read_u8(prefix, postfix, "itt2ga",
+ &pwr_info->itssi_2g, 0);
+ nvram_read_u8(prefix, postfix, "itt5ga",
+ &pwr_info->itssi_5g, 0);
+ nvram_read_u16(prefix, postfix, "pa2gw0a",
+ &pwr_info->pa_2g[0], 0);
+ nvram_read_u16(prefix, postfix, "pa2gw1a",
+ &pwr_info->pa_2g[1], 0);
+ nvram_read_u16(prefix, postfix, "pa2gw2a",
+ &pwr_info->pa_2g[2], 0);
+ nvram_read_u8(prefix, postfix, "maxp5ga",
+ &pwr_info->maxpwr_5g, 0);
+ nvram_read_u8(prefix, postfix, "maxp5gha",
+ &pwr_info->maxpwr_5gh, 0);
+ nvram_read_u8(prefix, postfix, "maxp5gla",
+ &pwr_info->maxpwr_5gl, 0);
+ nvram_read_u16(prefix, postfix, "pa5gw0a",
+ &pwr_info->pa_5g[0], 0);
+ nvram_read_u16(prefix, postfix, "pa5gw1a",
+ &pwr_info->pa_5g[1], 0);
+ nvram_read_u16(prefix, postfix, "pa5gw2a",
+ &pwr_info->pa_5g[2], 0);
+ nvram_read_u16(prefix, postfix, "pa5glw0a",
+ &pwr_info->pa_5gl[0], 0);
+ nvram_read_u16(prefix, postfix, "pa5glw1a",
+ &pwr_info->pa_5gl[1], 0);
+ nvram_read_u16(prefix, postfix, "pa5glw2a",
+ &pwr_info->pa_5gl[2], 0);
+ nvram_read_u16(prefix, postfix, "pa5ghw0a",
+ &pwr_info->pa_5gh[0], 0);
+ nvram_read_u16(prefix, postfix, "pa5ghw1a",
+ &pwr_info->pa_5gh[1], 0);
+ nvram_read_u16(prefix, postfix, "pa5ghw2a",
+ &pwr_info->pa_5gh[2], 0);
+ }
+}
+
+static void bcm47xx_fill_sprom_path_r45(struct ssb_sprom *sprom,
+ const char *prefix)
+{
+ char postfix[2];
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
+ struct ssb_sprom_core_pwr_info *pwr_info = &sprom->core_pwr_info[i];
+ snprintf(postfix, sizeof(postfix), "%i", i);
+ nvram_read_u16(prefix, postfix, "pa2gw3a",
+ &pwr_info->pa_2g[3], 0);
+ nvram_read_u16(prefix, postfix, "pa5gw3a",
+ &pwr_info->pa_5g[3], 0);
+ nvram_read_u16(prefix, postfix, "pa5glw3a",
+ &pwr_info->pa_5gl[3], 0);
+ nvram_read_u16(prefix, postfix, "pa5ghw3a",
+ &pwr_info->pa_5gh[3], 0);
+ }
+}
+
+void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom, const char *prefix)
+{
+ nvram_read_macaddr(prefix, "et0macaddr", &sprom->et0mac);
+ nvram_read_u8(prefix, NULL, "et0mdcport", &sprom->et0mdcport, 0);
+ nvram_read_u8(prefix, NULL, "et0phyaddr", &sprom->et0phyaddr, 0);
+
+ nvram_read_macaddr(prefix, "et1macaddr", &sprom->et1mac);
+ nvram_read_u8(prefix, NULL, "et1mdcport", &sprom->et1mdcport, 0);
+ nvram_read_u8(prefix, NULL, "et1phyaddr", &sprom->et1phyaddr, 0);
+
+ nvram_read_macaddr(prefix, "macaddr", &sprom->il0mac);
+ nvram_read_macaddr(prefix, "il0macaddr", &sprom->il0mac);
+}
+
+void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix)
+{
+ memset(sprom, 0, sizeof(struct ssb_sprom));
+
+ bcm47xx_fill_sprom_ethernet(sprom, prefix);
+
+ nvram_read_u8(prefix, NULL, "sromrev", &sprom->revision, 0);
+
+ switch (sprom->revision) {
+ case 1:
+ bcm47xx_fill_sprom_r1234589(sprom, prefix);
+ bcm47xx_fill_sprom_r12389(sprom, prefix);
+ bcm47xx_fill_sprom_r1(sprom, prefix);
+ break;
+ case 2:
+ bcm47xx_fill_sprom_r1234589(sprom, prefix);
+ bcm47xx_fill_sprom_r12389(sprom, prefix);
+ bcm47xx_fill_sprom_r2389(sprom, prefix);
+ bcm47xx_fill_sprom_r2(sprom, prefix);
+ break;
+ case 3:
+ bcm47xx_fill_sprom_r1234589(sprom, prefix);
+ bcm47xx_fill_sprom_r12389(sprom, prefix);
+ bcm47xx_fill_sprom_r2389(sprom, prefix);
+ bcm47xx_fill_sprom_r389(sprom, prefix);
+ bcm47xx_fill_sprom_r3(sprom, prefix);
+ break;
+ case 4:
+ case 5:
+ bcm47xx_fill_sprom_r1234589(sprom, prefix);
+ bcm47xx_fill_sprom_r4589(sprom, prefix);
+ bcm47xx_fill_sprom_r458(sprom, prefix);
+ bcm47xx_fill_sprom_r45(sprom, prefix);
+ bcm47xx_fill_sprom_path_r4589(sprom, prefix);
+ bcm47xx_fill_sprom_path_r45(sprom, prefix);
+ break;
+ case 8:
+ bcm47xx_fill_sprom_r1234589(sprom, prefix);
+ bcm47xx_fill_sprom_r12389(sprom, prefix);
+ bcm47xx_fill_sprom_r2389(sprom, prefix);
+ bcm47xx_fill_sprom_r389(sprom, prefix);
+ bcm47xx_fill_sprom_r4589(sprom, prefix);
+ bcm47xx_fill_sprom_r458(sprom, prefix);
+ bcm47xx_fill_sprom_r89(sprom, prefix);
+ bcm47xx_fill_sprom_path_r4589(sprom, prefix);
+ break;
+ case 9:
+ bcm47xx_fill_sprom_r1234589(sprom, prefix);
+ bcm47xx_fill_sprom_r12389(sprom, prefix);
+ bcm47xx_fill_sprom_r2389(sprom, prefix);
+ bcm47xx_fill_sprom_r389(sprom, prefix);
+ bcm47xx_fill_sprom_r4589(sprom, prefix);
+ bcm47xx_fill_sprom_r89(sprom, prefix);
+ bcm47xx_fill_sprom_r9(sprom, prefix);
+ bcm47xx_fill_sprom_path_r4589(sprom, prefix);
+ break;
+ default:
+ pr_warn("Unsupported SPROM revision %d detected. Will extract"
+ " v1\n", sprom->revision);
+ sprom->revision = 1;
+ bcm47xx_fill_sprom_r1234589(sprom, prefix);
+ bcm47xx_fill_sprom_r12389(sprom, prefix);
+ bcm47xx_fill_sprom_r1(sprom, prefix);
+ }
+}
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -44,4 +44,7 @@ union bcm47xx_bus {
extern union bcm47xx_bus bcm47xx_bus;
extern enum bcm47xx_bus_type bcm47xx_bus_type;
+void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix);
+void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom, const char *prefix);
+
#endif /* __ASM_BCM47XX_H */

View file

@ -1,80 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -3,7 +3,7 @@
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2006 Michael Buesch <m@bues.ch>
* Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
- * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -85,7 +85,7 @@ static void bcm47xx_machine_halt(void)
}
#ifdef CONFIG_BCM47XX_SSB
-static int bcm47xx_get_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
{
char prefix[10];
@@ -102,7 +102,7 @@ static int bcm47xx_get_sprom(struct ssb_
}
static int bcm47xx_get_invariants(struct ssb_bus *bus,
- struct ssb_init_invariants *iv)
+ struct ssb_init_invariants *iv)
{
char buf[20];
@@ -132,7 +132,7 @@ static void __init bcm47xx_register_ssb(
char buf[100];
struct ssb_mipscore *mcore;
- err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom);
+ err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb);
if (err)
printk(KERN_WARNING "bcm47xx: someone else already registered"
" a ssb SPROM callback handler (err %d)\n", err);
@@ -159,10 +159,41 @@ static void __init bcm47xx_register_ssb(
#endif
#ifdef CONFIG_BCM47XX_BCMA
+static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
+{
+ char prefix[10];
+ struct bcma_device *core;
+
+ switch (bus->hosttype) {
+ case BCMA_HOSTTYPE_PCI:
+ snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
+ bus->host_pci->bus->number + 1,
+ PCI_SLOT(bus->host_pci->devfn));
+ bcm47xx_fill_sprom(out, prefix);
+ return 0;
+ case BCMA_HOSTTYPE_SOC:
+ bcm47xx_fill_sprom_ethernet(out, NULL);
+ core = bcma_find_core(bus, BCMA_CORE_80211);
+ if (core) {
+ snprintf(prefix, sizeof(prefix), "sb/%u/",
+ core->core_index);
+ bcm47xx_fill_sprom(out, prefix);
+ }
+ return 0;
+ default:
+ pr_warn("bcm47xx: unable to fill SPROM for given bustype.\n");
+ return -EINVAL;
+ }
+}
+
static void __init bcm47xx_register_bcma(void)
{
int err;
+ err = bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma);
+ if (err)
+ pr_warn("bcm47xx: someone else already registered a bcma SPROM callback handler (err %d)\n", err);
+
err = bcma_host_soc_register(&bcm47xx_bus.bcma);
if (err)
panic("Failed to initialize BCMA bus (err %d)", err);

View file

@ -1,11 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -115,8 +115,6 @@ static int bcm47xx_get_invariants(struct
iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
- iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
bcm47xx_fill_sprom(&iv->sprom, NULL);

View file

@ -1,46 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -109,12 +109,7 @@ static int bcm47xx_get_invariants(struct
/* Fill boardinfo structure */
memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
- if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
- iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0);
- else
- iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
- if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
+ bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL);
bcm47xx_fill_sprom(&iv->sprom, NULL);
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -618,3 +618,15 @@ void bcm47xx_fill_sprom(struct ssb_sprom
bcm47xx_fill_sprom_r1(sprom, prefix);
}
}
+
+#ifdef CONFIG_BCM47XX_SSB
+void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo,
+ const char *prefix)
+{
+ nvram_read_u16(prefix, NULL, "boardvendor", &boardinfo->vendor, 0);
+ if (!boardinfo->vendor)
+ boardinfo->vendor = SSB_BOARDVENDOR_BCM;
+
+ nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0);
+}
+#endif
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -47,4 +47,9 @@ extern enum bcm47xx_bus_type bcm47xx_bus
void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix);
void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom, const char *prefix);
+#ifdef CONFIG_BCM47XX_SSB
+void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo,
+ const char *prefix);
+#endif
+
#endif /* __ASM_BCM47XX_H */

View file

@ -1,41 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -190,6 +190,8 @@ static void __init bcm47xx_register_bcma
err = bcma_host_soc_register(&bcm47xx_bus.bcma);
if (err)
panic("Failed to initialize BCMA bus (err %d)", err);
+
+ bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);
}
#endif
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -630,3 +630,15 @@ void bcm47xx_fill_ssb_boardinfo(struct s
nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0);
}
#endif
+
+#ifdef CONFIG_BCM47XX_BCMA
+void bcm47xx_fill_bcma_boardinfo(struct bcma_boardinfo *boardinfo,
+ const char *prefix)
+{
+ nvram_read_u16(prefix, NULL, "boardvendor", &boardinfo->vendor, 0);
+ if (!boardinfo->vendor)
+ boardinfo->vendor = SSB_BOARDVENDOR_BCM;
+
+ nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0);
+}
+#endif
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -51,5 +51,9 @@ void bcm47xx_fill_sprom_ethernet(struct
void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo,
const char *prefix);
#endif
+#ifdef CONFIG_BCM47XX_BCMA
+void bcm47xx_fill_bcma_boardinfo(struct bcma_boardinfo *boardinfo,
+ const char *prefix);
+#endif
#endif /* __ASM_BCM47XX_H */

View file

@ -1,11 +0,0 @@
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -165,6 +165,8 @@ static void bcm47xx_fill_sprom_r1234589(
const char *prefix)
{
nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0);
+ if (!sprom->board_rev)
+ nvram_read_u16(NULL, NULL, "boardrev", &sprom->board_rev, 0);
nvram_read_u16(prefix, NULL, "boardnum", &sprom->board_num, 0);
nvram_read_u8(prefix, NULL, "ledbh0", &sprom->gpio0, 0xff);
nvram_read_u8(prefix, NULL, "ledbh1", &sprom->gpio1, 0xff);

View file

@ -1,44 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -90,6 +90,7 @@ static int bcm47xx_get_sprom_ssb(struct
char prefix[10];
if (bus->bustype == SSB_BUSTYPE_PCI) {
+ memset(out, 0, sizeof(struct ssb_sprom));
snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
bus->host_pci->bus->number + 1,
PCI_SLOT(bus->host_pci->devfn));
@@ -111,6 +112,7 @@ static int bcm47xx_get_invariants(struct
bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL);
+ memset(&iv->sprom, 0, sizeof(struct ssb_sprom));
bcm47xx_fill_sprom(&iv->sprom, NULL);
if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
@@ -159,12 +161,14 @@ static int bcm47xx_get_sprom_bcma(struct
switch (bus->hosttype) {
case BCMA_HOSTTYPE_PCI:
+ memset(out, 0, sizeof(struct ssb_sprom));
snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
bus->host_pci->bus->number + 1,
PCI_SLOT(bus->host_pci->devfn));
bcm47xx_fill_sprom(out, prefix);
return 0;
case BCMA_HOSTTYPE_SOC:
+ memset(out, 0, sizeof(struct ssb_sprom));
bcm47xx_fill_sprom_ethernet(out, NULL);
core = bcma_find_core(bus, BCMA_CORE_80211);
if (core) {
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -557,8 +557,6 @@ void bcm47xx_fill_sprom_ethernet(struct
void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix)
{
- memset(sprom, 0, sizeof(struct ssb_sprom));
-
bcm47xx_fill_sprom_ethernet(sprom, prefix);
nvram_read_u8(prefix, NULL, "sromrev", &sprom->revision, 0);

View file

@ -1,10 +0,0 @@
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -21,6 +21,7 @@ config BCM47XX_BCMA
select BCMA
select BCMA_HOST_SOC
select BCMA_DRIVER_MIPS
+ select BCMA_HOST_PCI if PCI
select BCMA_DRIVER_PCI_HOSTMODE if PCI
default y
help

View file

@ -1,76 +0,0 @@
--- a/arch/mips/pci/pci-bcm47xx.c
+++ b/arch/mips/pci/pci-bcm47xx.c
@@ -25,6 +25,7 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/ssb/ssb.h>
+#include <linux/bcma/bcma.h>
#include <bcm47xx.h>
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
@@ -32,15 +33,12 @@ int __init pcibios_map_irq(const struct
return 0;
}
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
#ifdef CONFIG_BCM47XX_SSB
+static int bcm47xx_pcibios_plat_dev_init_ssb(struct pci_dev *dev)
+{
int res;
u8 slot, pin;
- if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
- return 0;
-
res = ssb_pcibios_plat_dev_init(dev);
if (res < 0) {
printk(KERN_ALERT "PCI: Failed to init device %s\n",
@@ -60,6 +58,47 @@ int pcibios_plat_dev_init(struct pci_dev
}
dev->irq = res;
+ return 0;
+}
#endif
+
+#ifdef CONFIG_BCM47XX_BCMA
+static int bcm47xx_pcibios_plat_dev_init_bcma(struct pci_dev *dev)
+{
+ int res;
+
+ res = bcma_core_pci_plat_dev_init(dev);
+ if (res < 0) {
+ printk(KERN_ALERT "PCI: Failed to init device %s\n",
+ pci_name(dev));
+ return res;
+ }
+
+ res = bcma_core_pci_pcibios_map_irq(dev);
+
+ /* IRQ-0 and IRQ-1 are software interrupts. */
+ if (res < 2) {
+ printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
+ pci_name(dev));
+ return res;
+ }
+
+ dev->irq = res;
return 0;
}
+#endif
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+#ifdef CONFIG_BCM47XX_SSB
+ if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_SSB)
+ return bcm47xx_pcibios_plat_dev_init_ssb(dev);
+ else
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA)
+ return bcm47xx_pcibios_plat_dev_init_bcma(dev);
+ else
+#endif
+ return 0;
+}

View file

@ -1,571 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -172,6 +172,13 @@ config MTD_MYLOADER_PARTS
You will still need the parsing functions to be called by the driver
for your particular device. It won't happen automatically.
+config MTD_BCM47XX_PARTS
+ tristate "BCM47XX partitioning support"
+ default y
+ depends on BCM47XX
+ ---help---
+ bcm47XX partitioning support
+
comment "User Modules And Translation Layers"
config MTD_CHAR
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_CHAR) += mtdchar.o
--- /dev/null
+++ b/drivers/mtd/bcm47xxpart.c
@@ -0,0 +1,542 @@
+/*
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+ *
+ * original functions for finding root filesystem from Mike Baker
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Flash mapping for BCM947XX boards
+ */
+
+#define pr_fmt(fmt) "bcm47xx_part: " fmt
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/crc32.h>
+#include <linux/io.h>
+#include <asm/mach-bcm47xx/nvram.h>
+#include <asm/mach-bcm47xx/bcm47xx.h>
+#include <asm/fw/cfe/cfe_api.h>
+
+
+#define TRX_MAGIC 0x30524448 /* "HDR0" */
+#define TRX_VERSION 1
+#define TRX_MAX_LEN 0x3A0000
+#define TRX_NO_HEADER 1 /* Do not write TRX header */
+#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */
+#define TRX_MAX_OFFSET 3
+
+struct trx_header {
+ u32 magic; /* "HDR0" */
+ u32 len; /* Length of file including header */
+ u32 crc32; /* 32-bit CRC from flag_version to end of file */
+ u32 flag_version; /* 0:15 flags, 16:31 version */
+ u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */
+};
+
+/* for Edimax Print servers which use an additional header
+ * then the firmware on flash looks like :
+ * EDIMAX HEADER | TRX HEADER
+ * As this header is 12 bytes long we have to handle it
+ * and skip it to find the TRX header
+ */
+#define EDIMAX_PS_HEADER_MAGIC 0x36315350 /* "PS16" */
+#define EDIMAX_PS_HEADER_LEN 0xc /* 12 bytes long for edimax header */
+
+#define NVRAM_SPACE 0x8000
+
+#define ROUTER_NETGEAR_WGR614L 1
+#define ROUTER_NETGEAR_WNR834B 2
+#define ROUTER_NETGEAR_WNDR3300 3
+#define ROUTER_NETGEAR_WNR3500L 4
+#define ROUTER_SIMPLETECH_SIMPLESHARE 5
+#define ROUTER_NETGEAR_WNDR3400 6
+
+static int
+find_cfe_size(struct mtd_info *mtd)
+{
+ struct trx_header *trx;
+ unsigned char buf[512];
+ int off;
+ size_t len;
+ int blocksize;
+
+ trx = (struct trx_header *) buf;
+
+ blocksize = mtd->erasesize;
+ if (blocksize < 0x10000)
+ blocksize = 0x10000;
+
+ for (off = (128*1024); off < mtd->size; off += blocksize) {
+ memset(buf, 0xe5, sizeof(buf));
+
+ /*
+ * Read into buffer
+ */
+ if (mtd->read(mtd, off, sizeof(buf), &len, buf) ||
+ len != sizeof(buf))
+ continue;
+
+ if (le32_to_cpu(trx->magic) == EDIMAX_PS_HEADER_MAGIC) {
+ if (mtd->read(mtd, off + EDIMAX_PS_HEADER_LEN,
+ sizeof(buf), &len, buf) || len != sizeof(buf)) {
+ continue;
+ } else {
+ pr_notice("Found edimax header\n");
+ }
+ }
+
+ /* found a TRX header */
+ if (le32_to_cpu(trx->magic) == TRX_MAGIC)
+ goto found;
+ }
+
+ pr_notice("%s: Couldn't find bootloader size\n", mtd->name);
+ return -1;
+
+ found:
+ pr_notice("bootloader size: %d\n", off);
+ return off;
+
+}
+
+/*
+ * Copied from mtdblock.c
+ *
+ * Cache stuff...
+ *
+ * Since typical flash erasable sectors are much larger than what Linux's
+ * buffer cache can handle, we must implement read-modify-write on flash
+ * sectors for each block write requests. To avoid over-erasing flash sectors
+ * and to speed things up, we locally cache a whole flash sector while it is
+ * being written to until a different sector is required.
+ */
+
+static void erase_callback(struct erase_info *done)
+{
+ wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+ wake_up(wait_q);
+}
+
+static int erase_write(struct mtd_info *mtd, unsigned long pos,
+ int len, const char *buf)
+{
+ struct erase_info erase;
+ DECLARE_WAITQUEUE(wait, current);
+ wait_queue_head_t wait_q;
+ size_t retlen;
+ int ret;
+
+ /*
+ * First, let's erase the flash block.
+ */
+
+ init_waitqueue_head(&wait_q);
+ erase.mtd = mtd;
+ erase.callback = erase_callback;
+ erase.addr = pos;
+ erase.len = len;
+ erase.priv = (u_long)&wait_q;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&wait_q, &wait);
+
+ ret = mtd->erase(mtd, &erase);
+ if (ret) {
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&wait_q, &wait);
+ pr_warn("erase of region [0x%lx, 0x%x] on \"%s\" failed\n",
+ pos, len, mtd->name);
+ return ret;
+ }
+
+ schedule(); /* Wait for erase to finish. */
+ remove_wait_queue(&wait_q, &wait);
+
+ /*
+ * Next, write data to flash.
+ */
+
+ ret = mtd->write(mtd, pos, len, &retlen, buf);
+ if (ret)
+ return ret;
+ if (retlen != len)
+ return -EIO;
+ return 0;
+}
+
+
+static int
+find_dual_image_off(struct mtd_info *mtd)
+{
+ struct trx_header trx;
+ int off, blocksize;
+ size_t len;
+
+ blocksize = mtd->erasesize;
+ if (blocksize < 0x10000)
+ blocksize = 0x10000;
+
+ for (off = (128*1024); off < mtd->size; off += blocksize) {
+ memset(&trx, 0xe5, sizeof(trx));
+ /*
+ * Read into buffer
+ */
+ if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
+ len != sizeof(trx))
+ continue;
+ /* found last TRX header */
+ if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
+ if (le32_to_cpu(trx.flag_version >> 16) == 2) {
+ pr_notice("dual image TRX header found\n");
+ return mtd->size / 2;
+ } else {
+ return 0;
+ }
+ }
+ }
+ return 0;
+}
+
+
+static int
+find_root(struct mtd_info *mtd, struct mtd_partition *part)
+{
+ struct trx_header trx, *trx2;
+ unsigned char buf[512], *block;
+ int off, blocksize, trxoff = 0;
+ u32 i, crc = ~0;
+ size_t len;
+ bool edimax = false;
+
+ blocksize = mtd->erasesize;
+ if (blocksize < 0x10000)
+ blocksize = 0x10000;
+
+ for (off = (128*1024); off < mtd->size; off += blocksize) {
+ memset(&trx, 0xe5, sizeof(trx));
+
+ /*
+ * Read into buffer
+ */
+ if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
+ len != sizeof(trx))
+ continue;
+
+ /* found an edimax header */
+ if (le32_to_cpu(trx.magic) == EDIMAX_PS_HEADER_MAGIC) {
+ /* read the correct trx header */
+ if (mtd->read(mtd, off + EDIMAX_PS_HEADER_LEN,
+ sizeof(trx), &len, (char *) &trx) ||
+ len != sizeof(trx)) {
+ continue;
+ } else {
+ pr_notice("Found an edimax ps header\n");
+ edimax = true;
+ }
+ }
+
+ /* found a TRX header */
+ if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
+ part->offset = le32_to_cpu(trx.offsets[2]) ? :
+ le32_to_cpu(trx.offsets[1]);
+ part->size = le32_to_cpu(trx.len);
+
+ part->size -= part->offset;
+ part->offset += off;
+ if (edimax) {
+ off += EDIMAX_PS_HEADER_LEN;
+ trxoff = EDIMAX_PS_HEADER_LEN;
+ }
+
+ goto found;
+ }
+ }
+
+ pr_warn("%s: Couldn't find root filesystem\n",
+ mtd->name);
+ return -1;
+
+ found:
+ pr_notice("TRX offset : %x\n", trxoff);
+ if (part->size == 0)
+ return 0;
+
+ if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf))
+ return 0;
+
+ /* Move the fs outside of the trx */
+ part->size = 0;
+
+ if (trx.len != part->offset + part->size - off) {
+ /* Update the trx offsets and length */
+ trx.len = part->offset + part->size - off;
+
+ /* Update the trx crc32 */
+ for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) {
+ if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf))
+ return 0;
+ crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i));
+ }
+ trx.crc32 = crc;
+
+ /* read first eraseblock from the trx */
+ block = kmalloc(mtd->erasesize, GFP_KERNEL);
+ trx2 = (struct trx_header *) block;
+ if (mtd->read(mtd, off - trxoff, mtd->erasesize, &len, block) || len != mtd->erasesize) {
+ pr_err("Error accessing the first trx eraseblock\n");
+ return 0;
+ }
+
+ pr_notice("Updating TRX offsets and length:\n");
+ pr_notice("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32);
+ pr_notice("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx.offsets[0], trx.offsets[1], trx.offsets[2], trx.len, trx.crc32);
+
+ /* Write updated trx header to the flash */
+ memcpy(block + trxoff, &trx, sizeof(trx));
+ if (mtd->unlock)
+ mtd->unlock(mtd, off - trxoff, mtd->erasesize);
+ erase_write(mtd, off - trxoff, mtd->erasesize, block);
+ if (mtd->sync)
+ mtd->sync(mtd);
+ kfree(block);
+ pr_notice("Done\n");
+ }
+
+ return part->size;
+}
+
+static int get_router(void)
+{
+ char buf[20];
+ u32 boardnum = 0;
+ u16 boardtype = 0;
+ u16 boardrev = 0;
+ u32 boardflags = 0;
+ u16 sdram_init = 0;
+ u16 cardbus = 0;
+ u16 strev = 0;
+
+ if (nvram_getenv("boardnum", buf, sizeof(buf)) >= 0)
+ boardnum = simple_strtoul(buf, NULL, 0);
+ if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
+ boardtype = simple_strtoul(buf, NULL, 0);
+ if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ boardrev = simple_strtoul(buf, NULL, 0);
+ if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0)
+ boardflags = simple_strtoul(buf, NULL, 0);
+ if (nvram_getenv("sdram_init", buf, sizeof(buf)) >= 0)
+ sdram_init = simple_strtoul(buf, NULL, 0);
+ if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+ cardbus = simple_strtoul(buf, NULL, 0);
+ if (nvram_getenv("st_rev", buf, sizeof(buf)) >= 0)
+ strev = simple_strtoul(buf, NULL, 0);
+
+ if ((boardnum == 8 || boardnum == 01)
+ && boardtype == 0x0472 && cardbus == 1) {
+ /* Netgear WNR834B, Netgear WNR834Bv2 */
+ return ROUTER_NETGEAR_WNR834B;
+ }
+
+ if (boardnum == 01 && boardtype == 0x0472 && boardrev == 0x23) {
+ /* Netgear WNDR-3300 */
+ return ROUTER_NETGEAR_WNDR3300;
+ }
+
+ if ((boardnum == 83258 || boardnum == 01)
+ && boardtype == 0x048e
+ && (boardrev == 0x11 || boardrev == 0x10)
+ && boardflags == 0x750
+ && sdram_init == 0x000A) {
+ /* Netgear WGR614v8/L/WW 16MB ram, cfe v1.3 or v1.5 */
+ return ROUTER_NETGEAR_WGR614L;
+ }
+
+ if ((boardnum == 1 || boardnum == 3500)
+ && boardtype == 0x04CF
+ && (boardrev == 0x1213 || boardrev == 02)) {
+ /* Netgear WNR3500v2/U/L */
+ return ROUTER_NETGEAR_WNR3500L;
+ }
+
+ if (boardnum == 1 && boardtype == 0xb4cf && boardrev == 0x1100) {
+ /* Netgear WNDR3400 */
+ return ROUTER_NETGEAR_WNDR3400;
+ }
+
+ if (boardtype == 0x042f
+ && boardrev == 0x10
+ && boardflags == 0
+ && strev == 0x11) {
+ /* Simpletech Simpleshare */
+ return ROUTER_SIMPLETECH_SIMPLESHARE;
+ }
+
+ return 0;
+}
+
+static int parse_bcm47xx_partitions(struct mtd_info *mtd,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ int cfe_size;
+ int dual_image_offset = 0;
+ /* e.g Netgear 0x003e0000-0x003f0000 : "board_data", we exclude this
+ * part from our mapping to prevent overwriting len/checksum on e.g.
+ * Netgear WGR614v8/L/WW
+ */
+ int custom_data_size = 0;
+ struct mtd_partition *bcm47xx_parts;
+
+ cfe_size = find_cfe_size(mtd);
+ if (cfe_size < 0)
+ return 0;
+
+ bcm47xx_parts = kzalloc(sizeof(struct mtd_partition) * 6, GFP_KERNEL);
+
+ bcm47xx_parts[0].name = "cfe";
+ bcm47xx_parts[1].name = "linux";
+ bcm47xx_parts[2].name = "rootfs";
+ bcm47xx_parts[3].name = "nvram";
+
+ /* boot loader */
+ bcm47xx_parts[0].mask_flags = MTD_WRITEABLE;
+ bcm47xx_parts[0].offset = 0;
+ bcm47xx_parts[0].size = cfe_size;
+
+ /* nvram */
+ if (cfe_size != 384 * 1024) {
+
+ switch (get_router()) {
+ case ROUTER_NETGEAR_WGR614L:
+ case ROUTER_NETGEAR_WNR834B:
+ case ROUTER_NETGEAR_WNDR3300:
+ case ROUTER_NETGEAR_WNR3500L:
+ case ROUTER_NETGEAR_WNDR3400:
+ /* Netgear: checksum is @ 0x003AFFF8 for 4M flash or checksum
+ * is @ 0x007AFFF8 for 8M flash
+ */
+ custom_data_size = mtd->erasesize;
+
+ bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize);
+ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize);
+
+ /* Place CFE board_data into a partition */
+ bcm47xx_parts[4].name = "board_data";
+ bcm47xx_parts[4].offset = bcm47xx_parts[3].offset - custom_data_size;
+ bcm47xx_parts[4].size = custom_data_size;
+ break;
+
+ case ROUTER_SIMPLETECH_SIMPLESHARE:
+ /* Fixup Simpletech Simple share nvram */
+
+ pr_notice("Setting up simpletech nvram\n");
+ custom_data_size = mtd->erasesize;
+
+ bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize) * 2;
+ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize);
+
+ /* Place backup nvram into a partition */
+ bcm47xx_parts[4].name = "nvram_copy";
+ bcm47xx_parts[4].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize);
+ bcm47xx_parts[4].size = roundup(NVRAM_SPACE, mtd->erasesize);
+ break;
+
+ default:
+ bcm47xx_parts[3].offset = mtd->size - roundup(NVRAM_SPACE, mtd->erasesize);
+ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize);
+ }
+
+ } else {
+ /* nvram (old 128kb config partition on netgear wgt634u) */
+ bcm47xx_parts[3].offset = bcm47xx_parts[0].size;
+ bcm47xx_parts[3].size = roundup(NVRAM_SPACE, mtd->erasesize);
+ }
+
+ /* dual image offset*/
+ pr_notice("Looking for dual image\n");
+ dual_image_offset = find_dual_image_off(mtd);
+ /* linux (kernel and rootfs) */
+ if (cfe_size != 384 * 1024) {
+ if (get_router() == ROUTER_SIMPLETECH_SIMPLESHARE) {
+ bcm47xx_parts[1].offset = bcm47xx_parts[0].size;
+ bcm47xx_parts[1].size = bcm47xx_parts[4].offset - dual_image_offset -
+ bcm47xx_parts[1].offset - custom_data_size;
+ } else {
+ bcm47xx_parts[1].offset = bcm47xx_parts[0].size;
+ bcm47xx_parts[1].size = bcm47xx_parts[3].offset - dual_image_offset -
+ bcm47xx_parts[1].offset - custom_data_size;
+ }
+ } else {
+ /* do not count the elf loader, which is on one block */
+ bcm47xx_parts[1].offset = bcm47xx_parts[0].size +
+ bcm47xx_parts[3].size + mtd->erasesize;
+ bcm47xx_parts[1].size = mtd->size -
+ bcm47xx_parts[0].size -
+ (2*bcm47xx_parts[3].size) -
+ mtd->erasesize - custom_data_size;
+ }
+
+ /* find and size rootfs */
+ find_root(mtd, &bcm47xx_parts[2]);
+ bcm47xx_parts[2].size = mtd->size - dual_image_offset -
+ bcm47xx_parts[2].offset -
+ bcm47xx_parts[3].size - custom_data_size;
+ *pparts = bcm47xx_parts;
+ return bcm47xx_parts[4].name == NULL ? 4 : 5;
+}
+
+static struct mtd_part_parser bcm47xx_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_bcm47xx_partitions,
+ .name = "bcm47xx",
+};
+
+static int __init bcm47xx_parser_init(void)
+{
+ return register_mtd_parser(&bcm47xx_parser);
+}
+
+static void __exit bcm47xx_parser_exit(void)
+{
+ deregister_mtd_parser(&bcm47xx_parser);
+}
+
+module_init(bcm47xx_parser_init);
+module_exit(bcm47xx_parser_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Parsing code for flash partitions on bcm47xx SoCs");

View file

@ -1,224 +0,0 @@
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -248,6 +248,15 @@ config MTD_LANTIQ
help
Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
+config MTD_BCM47XX_PFLASH
+ tristate "bcm47xx parallel flash support"
+ default y
+ depends on BCM47XX
+ select MTD_PARTITIONS
+ select MTD_BCM47XX_PARTS
+ help
+ Support for bcm47xx parallel flash
+
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_CFI_INTELEXT && BROKEN
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -57,3 +57,4 @@ obj-$(CONFIG_MTD_VMU) += vmu-flash.o
obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
+obj-$(CONFIG_MTD_BCM47XX_PFLASH)+= bcm47xx-pflash.o
--- /dev/null
+++ b/drivers/mtd/maps/bcm47xx-pflash.c
@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+ *
+ * original functions for finding root filesystem from Mike Baker
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Flash mapping for BCM947XX boards
+ */
+
+#define pr_fmt(fmt) "bcm47xx_pflash: " fmt
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <asm/mach-bcm47xx/bcm47xx.h>
+#include <linux/platform_device.h>
+
+#define WINDOW_ADDR 0x1fc00000
+#define WINDOW_SIZE 0x400000
+#define BUSWIDTH 2
+
+static struct mtd_info *bcm47xx_mtd;
+
+static void bcm47xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+ if (len == 1) {
+ memcpy_fromio(to, map->virt + from, len);
+ } else {
+ int i;
+ u16 *dest = (u16 *) to;
+ u16 *src = (u16 *) (map->virt + from);
+ for (i = 0; i < (len / 2); i++)
+ dest[i] = src[i];
+ if (len & 1)
+ *((u8 *)dest+len-1) = src[i] & 0xff;
+ }
+}
+
+static struct map_info bcm47xx_map = {
+ name: "Physically mapped flash",
+ size : WINDOW_SIZE,
+ bankwidth : BUSWIDTH,
+ phys : WINDOW_ADDR,
+};
+
+static const char *probes[] = { "bcm47xx", NULL };
+
+static int bcm47xx_pflash_probe(struct platform_device *pdev)
+{
+#ifdef CONFIG_BCM47XX_SSB
+ struct ssb_mipscore *ssb_mcore;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ struct bcma_drv_cc *bcma_cc;
+#endif
+ int ret = 0;
+
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ ssb_mcore = &bcm47xx_bus.ssb.mipscore;
+ if (!ssb_mcore->pflash.present)
+ return -ENODEV;
+
+ bcm47xx_map.phys = ssb_mcore->pflash.window;
+ bcm47xx_map.size = ssb_mcore->pflash.window_size;
+ bcm47xx_map.bankwidth = ssb_mcore->pflash.buswidth;
+ break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
+ if (!bcma_cc->pflash.present)
+ return -ENODEV;
+
+ bcm47xx_map.phys = bcma_cc->pflash.window;
+ bcm47xx_map.size = bcma_cc->pflash.window_size;
+ bcm47xx_map.bankwidth = bcma_cc->pflash.buswidth;
+ break;
+#endif
+ }
+
+ pr_notice("flash init: 0x%08x 0x%08lx\n", bcm47xx_map.phys, bcm47xx_map.size);
+ bcm47xx_map.virt = ioremap_nocache(bcm47xx_map.phys, bcm47xx_map.size);
+
+ if (!bcm47xx_map.virt) {
+ pr_err("Failed to ioremap\n");
+ return -EIO;
+ }
+
+ simple_map_init(&bcm47xx_map);
+ /* override copy_from routine */
+ bcm47xx_map.copy_from = bcm47xx_map_copy_from;
+
+ bcm47xx_mtd = do_map_probe("cfi_probe", &bcm47xx_map);
+ if (!bcm47xx_mtd) {
+ pr_err("Failed to do_map_probe\n");
+ ret = -ENXIO;
+ goto err_unmap;
+ }
+ bcm47xx_mtd->owner = THIS_MODULE;
+
+ pr_notice("Flash device: 0x%lx at 0x%x\n", bcm47xx_map.size, WINDOW_ADDR);
+
+ ret = mtd_device_parse_register(bcm47xx_mtd, probes, NULL, NULL, 0);
+
+ if (ret) {
+ pr_err("Flash: mtd_device_register failed\n");
+ goto err_destroy;
+ }
+ return 0;
+
+err_destroy:
+ map_destroy(bcm47xx_mtd);
+err_unmap:
+ iounmap(bcm47xx_map.virt);
+ return ret;
+}
+
+static int __devexit bcm47xx_pflash_remove(struct platform_device *pdev)
+{
+ mtd_device_unregister(bcm47xx_mtd);
+ map_destroy(bcm47xx_mtd);
+ iounmap(bcm47xx_map.virt);
+ return 0;
+}
+
+static const struct platform_device_id bcm47xx_pflash_table[] = {
+ { "bcm47xx-pflash", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, bcm47xx_pflash_table);
+
+static struct platform_driver bcm47xx_pflash_driver = {
+ .id_table = bcm47xx_pflash_table,
+ .probe = bcm47xx_pflash_probe,
+ .remove = __devexit_p(bcm47xx_pflash_remove),
+ .driver = {
+ .name = "bcm47xx-pflash",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init init_bcm47xx_pflash(void)
+{
+ int ret = platform_driver_register(&bcm47xx_pflash_driver);
+
+ if (ret)
+ pr_err("error registering platform driver: %i\n", ret);
+ return ret;
+}
+
+static void __exit exit_bcm47xx_pflash(void)
+{
+ platform_driver_unregister(&bcm47xx_pflash_driver);
+}
+
+module_init(init_bcm47xx_pflash);
+module_exit(exit_bcm47xx_pflash);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("BCM47XX parallel flash driver");

View file

@ -1,335 +0,0 @@
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -257,6 +257,15 @@ config MTD_BCM47XX_PFLASH
help
Support for bcm47xx parallel flash
+config MTD_BCM47XX_SFLASH
+ tristate "bcm47xx serial flash support"
+ default y
+ depends on BCM47XX
+ select MTD_PARTITIONS
+ select MTD_BCM47XX_PARTS
+ help
+ Support for bcm47xx parallel flash
+
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_CFI_INTELEXT && BROKEN
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -58,3 +58,4 @@ obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr
obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
obj-$(CONFIG_MTD_BCM47XX_PFLASH)+= bcm47xx-pflash.o
+obj-$(CONFIG_MTD_BCM47XX_SFLASH)+= bcm47xx-sflash.o
--- /dev/null
+++ b/drivers/mtd/maps/bcm47xx-sflash.c
@@ -0,0 +1,270 @@
+/*
+ * Broadcom SiliconBackplane chipcommon serial flash interface
+ *
+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#define pr_fmt(fmt) "bcm47xx_sflash: " fmt
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/bcm47xx_sflash.h>
+
+static int
+sflash_mtd_poll(struct bcm47xx_sflash *sflash, unsigned int offset, int timeout)
+{
+ unsigned long now = jiffies;
+
+ for (;;) {
+ if (!sflash->poll(sflash, offset)) {
+ break;
+ }
+ if (time_after(jiffies, now + timeout)) {
+ pr_err("timeout while polling\n");
+ return -ETIMEDOUT;
+
+ }
+ cpu_relax();
+ udelay(1);
+ }
+
+ return 0;
+}
+
+static int
+sflash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+ struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *)mtd->priv;
+
+ /* Check address range */
+ if (!len)
+ return 0;
+
+ if ((from + len) > mtd->size)
+ return -EINVAL;
+
+ *retlen = 0;
+ while (len) {
+ int ret = sflash->read(sflash, from, len, buf);
+ if (ret < 0)
+ return ret;
+
+ from += (loff_t) ret;
+ len -= ret;
+ buf += ret;
+ *retlen += ret;
+ }
+
+ return 0;
+}
+
+static int
+sflash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
+{
+ int bytes;
+ int ret;
+ struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *)mtd->priv;
+
+ /* Check address range */
+ if (!len)
+ return 0;
+
+ if ((to + len) > mtd->size)
+ return -EINVAL;
+
+ *retlen = 0;
+ while (len) {
+ ret = sflash->write(sflash, to, len, buf);
+ if (ret < 0)
+ return ret;
+
+ bytes = ret;
+
+ ret = sflash_mtd_poll(sflash, (unsigned int) to, HZ / 10);
+ if (ret)
+ return ret;
+
+ to += (loff_t) bytes;
+ len -= bytes;
+ buf += bytes;
+ *retlen += bytes;
+ }
+
+ return 0;
+}
+
+static int
+sflash_mtd_erase(struct mtd_info *mtd, struct erase_info *erase)
+{
+ struct bcm47xx_sflash *sflash = (struct bcm47xx_sflash *) mtd->priv;
+ int i, j, ret = 0;
+ unsigned int addr, len;
+
+ /* Check address range */
+ if (!erase->len)
+ return 0;
+ if ((erase->addr + erase->len) > mtd->size)
+ return -EINVAL;
+
+ addr = erase->addr;
+ len = erase->len;
+
+ /* Ensure that requested regions are aligned */
+ for (i = 0; i < mtd->numeraseregions; i++) {
+ for (j = 0; j < mtd->eraseregions[i].numblocks; j++) {
+ if (addr == mtd->eraseregions[i].offset +
+ mtd->eraseregions[i].erasesize * j &&
+ len >= mtd->eraseregions[i].erasesize) {
+ ret = sflash->erase(sflash, addr);
+ if (ret < 0)
+ break;
+ ret = sflash_mtd_poll(sflash, addr, 10 * HZ);
+ if (ret)
+ break;
+ addr += mtd->eraseregions[i].erasesize;
+ len -= mtd->eraseregions[i].erasesize;
+ }
+ }
+ if (ret)
+ break;
+ }
+
+ /* Set erase status */
+ if (ret)
+ erase->state = MTD_ERASE_FAILED;
+ else
+ erase->state = MTD_ERASE_DONE;
+
+ /* Call erase callback */
+ if (erase->callback)
+ erase->callback(erase);
+
+ return ret;
+}
+
+static const char *probes[] = { "bcm47xx", NULL };
+
+static int bcm47xx_sflash_probe(struct platform_device *pdev)
+{
+ struct bcm47xx_sflash *sflash = dev_get_platdata(&pdev->dev);
+ struct mtd_info *mtd;
+ struct mtd_erase_region_info *eraseregions;
+ int ret = 0;
+
+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ if (!mtd){
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ eraseregions = kzalloc(sizeof(struct mtd_erase_region_info), GFP_KERNEL);
+ if (!eraseregions) {
+ ret = -ENOMEM;
+ goto err_free_mtd;
+ }
+
+ pr_info("found serial flash: blocksize=%dKB, numblocks=%d, size=%dKB\n",
+ sflash->blocksize / 1024, sflash->numblocks, sflash->size / 1024);
+
+ /* Setup region info */
+ eraseregions->offset = 0;
+ eraseregions->erasesize = sflash->blocksize;
+ eraseregions->numblocks = sflash->numblocks;
+ if (eraseregions->erasesize > mtd->erasesize)
+ mtd->erasesize = eraseregions->erasesize;
+ mtd->size = sflash->size;
+ mtd->numeraseregions = 1;
+
+ /* Register with MTD */
+ mtd->name = "bcm47xx-sflash";
+ mtd->type = MTD_NORFLASH;
+ mtd->flags = MTD_CAP_NORFLASH;
+ mtd->eraseregions = eraseregions;
+ mtd->erase = sflash_mtd_erase;
+ mtd->read = sflash_mtd_read;
+ mtd->write = sflash_mtd_write;
+ mtd->writesize = 1;
+ mtd->priv = sflash;
+ ret = dev_set_drvdata(&pdev->dev, mtd);
+ mtd->owner = THIS_MODULE;
+ if (ret) {
+ pr_err("adding private data failed\n");
+ goto err_free_eraseregions;
+ }
+
+ ret = mtd_device_parse_register(mtd, probes, NULL, NULL, 0);
+
+ if (ret) {
+ pr_err("mtd_device_register failed\n");
+ goto err_free_eraseregions;
+ }
+ return 0;
+
+err_free_eraseregions:
+ kfree(eraseregions);
+err_free_mtd:
+ kfree(mtd);
+err_out:
+ return ret;
+}
+
+static int __devexit bcm47xx_sflash_remove(struct platform_device *pdev)
+{
+ struct mtd_info *mtd = dev_get_drvdata(&pdev->dev);
+
+ if (mtd) {
+ mtd_device_unregister(mtd);
+ map_destroy(mtd);
+ kfree(mtd->eraseregions);
+ kfree(mtd);
+ dev_set_drvdata(&pdev->dev, NULL);
+ }
+ return 0;
+}
+
+static const struct platform_device_id bcm47xx_sflash_table[] = {
+ { "bcm47xx-sflash", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, bcm47xx_sflash_table);
+
+static struct platform_driver bcm47xx_sflash_driver = {
+ .id_table = bcm47xx_sflash_table,
+ .probe = bcm47xx_sflash_probe,
+ .remove = __devexit_p(bcm47xx_sflash_remove),
+ .driver = {
+ .name = "bcm47xx-sflash",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init init_bcm47xx_sflash(void)
+{
+ int ret = platform_driver_register(&bcm47xx_sflash_driver);
+
+ if (ret)
+ pr_err("error registering platform driver: %i\n", ret);
+ return ret;
+}
+
+static void __exit exit_bcm47xx_sflash(void)
+{
+ platform_driver_unregister(&bcm47xx_sflash_driver);
+}
+
+module_init(init_bcm47xx_sflash);
+module_exit(exit_bcm47xx_sflash);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("BCM47XX serial flash driver");
--- /dev/null
+++ b/include/linux/mtd/bcm47xx_sflash.h
@@ -0,0 +1,34 @@
+#ifndef LINUX_MTD_BCM47XX_SFLASH_H_
+#define LINUX_MTD_BCM47XX_SFLASH_H_
+
+#include <linux/mtd/mtd.h>
+
+enum bcm47xx_sflash_type {
+ BCM47XX_SFLASH_SSB,
+ BCM47XX_SFLASH_BCMA,
+};
+
+struct ssb_chipcommon;
+struct bcma_drv_cc;
+
+struct bcm47xx_sflash {
+ enum bcm47xx_sflash_type type;
+ union {
+ struct ssb_chipcommon *scc;
+ struct bcma_drv_cc *bcc;
+ };
+
+ bool present;
+ u16 numblocks;
+ u32 window;
+ u32 blocksize;
+ u32 size;
+
+ int (*read)(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf);
+ int (*poll)(struct bcm47xx_sflash *dev, u32 offset);
+ int (*write)(struct bcm47xx_sflash *dev, u32 offset, u32 len, const u8 *buf);
+ int (*erase)(struct bcm47xx_sflash *dev, u32 offset);
+
+ struct mtd_info *mtd;
+};
+#endif /* LINUX_MTD_BCM47XX_SFLASH_H_ */

View file

@ -1,710 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -536,4 +536,12 @@ config MTD_NAND_FSMC
Enables support for NAND Flash chips on the ST Microelectronics
Flexible Static Memory Controller (FSMC)
+config MTD_NAND_BCM47XX
+ tristate "bcm47xx nand flash support"
+ default y
+ depends on BCM47XX && BCMA_NFLASH
+ select MTD_PARTITIONS
+ help
+ Support for bcm47xx nand flash
+
endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mp
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
+obj-$(CONFIG_MTD_NAND_BCM47XX) += bcm47xx_nand.o
nand-objs := nand_base.o nand_bbt.o
--- /dev/null
+++ b/drivers/mtd/nand/bcm47xx_nand.c
@@ -0,0 +1,528 @@
+/*
+ * BCMA nand flash interface
+ *
+ * Copyright (C) 2011-2012 Tathagata Das <tathagata@alumnux.com>
+ * Copyright 2010, Broadcom Corporation
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ */
+
+#define pr_fmt(fmt) "bcm47xx_nflash: " fmt
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <bcm47xx.h>
+#include <linux/cramfs_fs.h>
+#include <linux/romfs_fs.h>
+#include <linux/magic.h>
+#include <linux/byteorder/generic.h>
+#include <linux/mtd/bcm47xx_nand.h>
+#include <linux/mtd/nand.h>
+
+static int bcm47xx_nflash_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip);
+static int bcm47xx_nflash_erase(struct mtd_info *mtd, unsigned int addr, unsigned int len);
+
+/* Private Global variable */
+static u32 read_offset = 0;
+static u32 write_offset;
+
+static int
+nflash_mtd_poll(struct bcm47xx_nflash *nflash, unsigned int offset, int timeout)
+{
+ unsigned long now = jiffies;
+ int ret = 0;
+
+ for (;;) {
+ if (!bcma_nflash_poll(nflash->bcc)) {
+ ret = 0;
+ break;
+ }
+ if (time_after(jiffies, now + timeout)) {
+ pr_err("timeout while polling\n");
+ ret = -ETIMEDOUT;
+ break;
+ }
+ udelay(1);
+ }
+
+ return ret;
+}
+
+static int
+bcm47xx_nflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+ struct nand_chip *nchip = (struct nand_chip *)mtd->priv;
+ struct bcm47xx_nflash *nflash = (struct bcm47xx_nflash *)nchip->priv;
+ int bytes, ret = 0;
+ u32 extra = 0;
+ u8 *tmpbuf = NULL;
+ int size;
+ u32 offset, blocksize, mask, off;
+ u32 skip_bytes = 0;
+ int need_copy = 0;
+ u8 *ptr = NULL;
+
+ /* Check address range */
+ if (!len)
+ return 0;
+ if ((from + len) > mtd->size)
+ return -EINVAL;
+ offset = from;
+ if ((offset & (NFL_SECTOR_SIZE - 1)) != 0) {
+ extra = offset & (NFL_SECTOR_SIZE - 1);
+ offset -= extra;
+ len += extra;
+ need_copy = 1;
+ }
+ size = (len + (NFL_SECTOR_SIZE - 1)) & ~(NFL_SECTOR_SIZE - 1);
+ if (size != len) {
+ need_copy = 1;
+ }
+ if (!need_copy) {
+ ptr = buf;
+ } else {
+ tmpbuf = (u8 *)kmalloc(size, GFP_KERNEL);
+ ptr = tmpbuf;
+ }
+
+ blocksize = mtd->erasesize;
+ mask = blocksize - 1;
+ *retlen = 0;
+ while (len > 0) {
+ off = offset + skip_bytes;
+ if ((bytes = bcma_nflash_read(nflash->bcc, off, NFL_SECTOR_SIZE, ptr)) < 0) {
+ ret = bytes;
+ goto done;
+ }
+ if (bytes > len)
+ bytes = len;
+ offset += bytes;
+ len -= bytes;
+ ptr += bytes;
+ *retlen += bytes;
+ }
+
+done:
+ if (tmpbuf) {
+ *retlen -= extra;
+ memcpy(buf, tmpbuf+extra, *retlen);
+ kfree(tmpbuf);
+ }
+
+ return ret;
+}
+
+static void bcm47xx_nflash_write(struct mtd_info *mtd, u32 to, const u_char *buf, u32 len)
+{
+ struct nand_chip *nchip = (struct nand_chip *)mtd->priv;
+ struct bcm47xx_nflash *nflash = (struct bcm47xx_nflash *)nchip->priv;
+ u32 offset, blocksize, mask, off;
+ int read_len;
+ u32 copy_len, write_len, from;
+ u_char *write_ptr, *block;
+ const u_char *ptr;
+ int ret, bytes;
+
+ /* Check address range */
+ if (!len) {
+ pr_err("Error: Attempted to write too small data\n");
+ return;
+ }
+
+ if (!to)
+ return;
+
+ if ((to + len) > mtd->size) {
+ pr_err("Error: Attempted to write too large data\n");
+ return;
+ }
+
+ ptr = buf;
+ block = NULL;
+ offset = to;
+ blocksize = mtd->erasesize;
+ if (!(block = kmalloc(blocksize, GFP_KERNEL)))
+ return;
+ mask = blocksize - 1;
+ while (len) {
+ /* Align offset */
+ from = offset & ~mask;
+ /* Copy existing data into holding block if necessary */
+ if (((offset & (blocksize-1)) != 0) || (len < blocksize)) {
+ if ((ret = bcm47xx_nflash_read(mtd, from, blocksize, &read_len, block)))
+ goto done;
+ if (read_len != blocksize) {
+ ret = -EINVAL;
+ goto done;
+ }
+ }
+
+ /* Copy input data into holding block */
+ copy_len = min(len, blocksize - (offset & mask));
+ memcpy(block + (offset & mask), ptr, copy_len);
+ off = (uint) from;
+ /* Erase block */
+ if ((ret = bcm47xx_nflash_erase(mtd, off, blocksize)) < 0)
+ goto done;
+ /* Write holding block */
+ write_ptr = block;
+ write_len = blocksize;
+ if ((bytes = bcma_nflash_write(nflash->bcc, (uint)from, (uint)write_len, (u8 *) write_ptr)) != 0) {
+ ret = bytes;
+ goto done;
+ }
+ offset += copy_len;
+ if (len < copy_len)
+ len = 0;
+ else
+ len -= copy_len;
+ ptr += copy_len;
+ }
+
+done:
+ if (block)
+ kfree(block);
+ return;
+}
+
+static int bcm47xx_nflash_erase(struct mtd_info *mtd, unsigned int addr, unsigned int len)
+{
+ struct nand_chip *nchip = (struct nand_chip *)mtd->priv;
+ struct bcm47xx_nflash *nflash = (struct bcm47xx_nflash *)nchip->priv;
+
+ /* Check address range */
+ if (!len)
+ return 1;
+ if ((addr + len) > mtd->size)
+ return 1;
+
+ if (bcma_nflash_erase(nflash->bcc, addr)) {
+ pr_err("ERASE: nflash erase error\n");
+ return 1;
+ }
+
+ if (nflash_mtd_poll(nflash, addr, 10 * HZ)) {
+ pr_err("ERASE: nflash_mtd_poll error\n");
+ return 1;
+ }
+
+ return 0;
+}
+
+/* This functions is used by upper layer to checks if device is ready */
+static int bcm47xx_nflash_dev_ready(struct mtd_info *mtd)
+{
+ return 1;
+}
+
+/* Issue a nand flash command */
+static inline void bcm47xx_nflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
+{
+ bcma_cc_write32(cc, NAND_CMD_START, opcode);
+ bcma_cc_read32(cc, NAND_CMD_START);
+}
+
+static void bcm47xx_nflash_command(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
+{
+ struct nand_chip *nchip = (struct nand_chip *)mtd->priv;
+ struct bcm47xx_nflash *nflash = (struct bcm47xx_nflash *)nchip->priv;
+ u32 pagesize = 1 << nchip->page_shift;
+
+ /* Command pre-processing step */
+ switch (command) {
+ case NAND_CMD_RESET:
+ bcm47xx_nflash_cmd(nflash->bcc, NCMD_FLASH_RESET);
+ break;
+
+ case NAND_CMD_STATUS:
+ nflash->next_opcode = NAND_CMD_STATUS;
+ read_offset = 0;
+ write_offset = 0;
+ break;
+
+ case NAND_CMD_READ0:
+ read_offset = page_addr * pagesize;
+ nflash->next_opcode = 0;
+ break;
+
+ case NAND_CMD_READOOB:
+ read_offset = page_addr * pagesize;
+ nflash->next_opcode = 0;
+ break;
+
+ case NAND_CMD_SEQIN:
+ write_offset = page_addr * pagesize;
+ nflash->next_opcode = 0;
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ nflash->next_opcode = 0;
+ break;
+
+ case NAND_CMD_READID:
+ read_offset = column;
+ bcm47xx_nflash_cmd(nflash->bcc, NCMD_ID_RD);
+ nflash->next_opcode = NAND_DEVID;
+ break;
+
+ case NAND_CMD_ERASE1:
+ nflash->next_opcode = 0;
+ bcm47xx_nflash_erase(mtd, page_addr*pagesize, pagesize);
+ break;
+
+ case NAND_CMD_ERASE2:
+ break;
+
+ case NAND_CMD_RNDOUT:
+ if (column > mtd->writesize)
+ read_offset += (column - mtd->writesize);
+ else
+ read_offset += column;
+ break;
+
+ default:
+ pr_err("COMMAND not supported %x\n", command);
+ nflash->next_opcode = 0;
+ break;
+ }
+}
+
+/* This function is used by upper layer for select and
+ * deselect of the NAND chip.
+ * It is dummy function. */
+static void bcm47xx_nflash_select_chip(struct mtd_info *mtd, int chip)
+{
+}
+
+static u_char bcm47xx_nflash_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *nchip = mtd->priv;
+ struct bcm47xx_nflash *nflash = (struct bcm47xx_nflash *)nchip->priv;
+ uint8_t ret = 0;
+ static u32 id;
+
+ if (nflash->next_opcode == 0)
+ return ret;
+
+ if (nflash->next_opcode == NAND_CMD_STATUS)
+ return NAND_STATUS_WP;
+
+ id = bcma_cc_read32(nflash->bcc, nflash->next_opcode);
+
+ if (nflash->next_opcode == NAND_DEVID) {
+ ret = (id >> (8*read_offset)) & 0xff;
+ read_offset++;
+ }
+
+ return ret;
+}
+
+static uint16_t bcm47xx_nflash_read_word(struct mtd_info *mtd)
+{
+ loff_t from = read_offset;
+ uint16_t buf = 0;
+ int bytes;
+
+ bcm47xx_nflash_read(mtd, from, sizeof(buf), &bytes, (u_char *)&buf);
+ return buf;
+}
+
+/* Write data of length len to buffer buf. The data to be
+ * written on NAND Flash is first copied to RAMbuffer. After the Data Input
+ * Operation by the NFC, the data is written to NAND Flash */
+static void bcm47xx_nflash_write_buf(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ bcm47xx_nflash_write(mtd, write_offset, buf, len);
+}
+
+/* Read the data buffer from the NAND Flash. To read the data from NAND
+ * Flash first the data output cycle is initiated by the NFC, which copies
+ * the data to RAMbuffer. This data of length len is then copied to buffer buf.
+ */
+static void bcm47xx_nflash_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ loff_t from = read_offset;
+ int bytes;
+
+ bcm47xx_nflash_read(mtd, from, len, &bytes, buf);
+}
+
+/* Used by the upper layer to verify the data in NAND Flash
+ * with the data in the buf. */
+static int bcm47xx_nflash_verify_buf(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ return -EFAULT;
+}
+
+static int bcm47xx_nflash_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+ struct nand_chip *nchip = mtd->priv;
+ struct bcm47xx_nflash *nflash = (struct bcm47xx_nflash *)nchip->priv;
+ int i;
+ uint off;
+ u32 pagesize = 1 << nchip->page_shift;
+ u32 blocksize = mtd->erasesize;
+
+ if ((ofs >> 20) >= nflash->size)
+ return 1;
+ if ((ofs & (blocksize - 1)) != 0)
+ return 1;
+
+ for (i = 0; i < 2; i++) {
+ off = ofs + pagesize;
+ bcma_cc_write32(nflash->bcc, NAND_CMD_ADDR, off);
+ bcm47xx_nflash_cmd(nflash->bcc, NCMD_SPARE_RD);
+ if (bcma_nflash_poll(nflash->bcc) < 0)
+ break;
+ if ((bcma_cc_read32(nflash->bcc, NAND_INTFC_STATUS) & NIST_SPARE_VALID) != NIST_SPARE_VALID)
+ return 1;
+ if ((bcma_cc_read32(nflash->bcc, NAND_SPARE_RD0) & 0xff) != 0xff)
+ return 1;
+ }
+ return 0;
+}
+
+const char *part_probes[] = { "cmdlinepart", NULL };
+static int bcm47xx_nflash_probe(struct platform_device *pdev)
+{
+ struct nand_chip *nchip;
+ struct mtd_info *mtd;
+ struct bcm47xx_nflash *nflash = dev_get_platdata(&pdev->dev);
+ int ret = 0;
+
+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ if (!mtd){
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ nchip = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
+ if (!nchip) {
+ ret = -ENOMEM;
+ goto err_free_mtd;
+ }
+
+ /* Register with MTD */
+ mtd->priv = nchip;
+ mtd->owner = THIS_MODULE;
+ mtd->dev.parent = &pdev->dev;
+
+ /* 50 us command delay time */
+ nchip->chip_delay = 50;
+
+ nchip->priv = nflash;
+ nchip->dev_ready = bcm47xx_nflash_dev_ready;
+ nchip->cmdfunc = bcm47xx_nflash_command;
+ nchip->select_chip = bcm47xx_nflash_select_chip;
+ nchip->read_byte = bcm47xx_nflash_read_byte;
+ nchip->read_word = bcm47xx_nflash_read_word;
+ nchip->write_buf = bcm47xx_nflash_write_buf;
+ nchip->read_buf = bcm47xx_nflash_read_buf;
+ nchip->verify_buf = bcm47xx_nflash_verify_buf;
+ nchip->block_bad = bcm47xx_nflash_block_bad;
+ nchip->options = NAND_SKIP_BBTSCAN;
+
+ /* Not known */
+ nchip->ecc.mode = NAND_ECC_NONE;
+
+ /* first scan to find the device and get the page size */
+ if (nand_scan_ident(mtd, 1, NULL)) {
+ pr_err("nand_scan_ident failed\n");
+ ret = -ENXIO;
+ goto err_free_nchip;
+ }
+ nflash->size = mtd->size;
+ nflash->pagesize = 1 << nchip->page_shift;
+ nflash->blocksize = mtd->erasesize;
+ nflash->mtd = mtd;
+
+ /* second phase scan */
+ if (nand_scan_tail(mtd)) {
+ pr_err("nand_scan_tail failed\n");
+ ret = -ENXIO;
+ goto err_free_nchip;
+ }
+
+ mtd->name = "bcm47xx-nflash";
+ mtd->flags |= MTD_WRITEABLE;
+ ret = mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0);
+
+ if (ret) {
+ pr_err("mtd_device_register failed\n");
+ goto err_free_nchip;
+ }
+
+ return 0;
+
+err_free_nchip:
+ kfree(nchip);
+err_free_mtd:
+ kfree(mtd);
+err_out:
+ return ret;
+}
+
+static int __devexit bcm47xx_nflash_remove(struct platform_device *pdev)
+{
+ struct bcm47xx_nflash *nflash = dev_get_platdata(&pdev->dev);
+ struct mtd_info *mtd = nflash->mtd;
+
+ if (nflash) {
+ /* Release resources, unregister device */
+ nand_release(mtd);
+ kfree(mtd->priv);
+ kfree(mtd);
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id bcm47xx_nflash_table[] = {
+ { "bcm47xx-nflash", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, bcm47xx_nflash_table);
+
+static struct platform_driver bcm47xx_nflash_driver = {
+ .id_table = bcm47xx_nflash_table,
+ .probe = bcm47xx_nflash_probe,
+ .remove = __devexit_p(bcm47xx_nflash_remove),
+ .driver = {
+ .name = "bcm47xx-nflash",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init init_bcm47xx_nflash(void)
+{
+ int ret = platform_driver_register(&bcm47xx_nflash_driver);
+
+ if (ret)
+ pr_err("error registering platform driver: %i\n", ret);
+ return ret;
+}
+
+static void __exit exit_bcm47xx_nflash(void)
+{
+ platform_driver_unregister(&bcm47xx_nflash_driver);
+}
+
+module_init(init_bcm47xx_nflash);
+module_exit(exit_bcm47xx_nflash);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("BCM47XX NAND flash driver");
--- /dev/null
+++ b/include/linux/mtd/bcm47xx_nand.h
@@ -0,0 +1,152 @@
+/*
+ * Broadcom chipcommon NAND flash interface
+ *
+ * Copyright (C) 2011-2012 Tathagata Das <tathagata@alumnux.com>
+ * Copyright (C) 2009, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ */
+
+#ifndef LINUX_MTD_BCM47XX_NAND_H_
+#define LINUX_MTD_BCM47XX_NAND_H_
+
+#include <linux/mtd/mtd.h>
+
+#define NAND_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */
+
+/* nand_cmd_start commands */
+#define NCMD_NULL 0
+#define NCMD_PAGE_RD 1
+#define NCMD_SPARE_RD 2
+#define NCMD_STATUS_RD 3
+#define NCMD_PAGE_PROG 4
+#define NCMD_SPARE_PROG 5
+#define NCMD_COPY_BACK 6
+#define NCMD_ID_RD 7
+#define NCMD_BLOCK_ERASE 8
+#define NCMD_FLASH_RESET 9
+#define NCMD_LOCK 0xa
+#define NCMD_LOCK_DOWN 0xb
+#define NCMD_UNLOCK 0xc
+#define NCMD_LOCK_STATUS 0xd
+
+/* nand_acc_control */
+#define NAC_RD_ECC_EN 0x80000000
+#define NAC_WR_ECC_EN 0x40000000
+#define NAC_RD_ECC_BLK0_EN 0x20000000
+#define NAC_FAST_PGM_RDIN 0x10000000
+#define NAC_RD_ERASED_ECC_EN 0x08000000
+#define NAC_PARTIAL_PAGE_EN 0x04000000
+#define NAC_PAGE_HIT_EN 0x01000000
+#define NAC_ECC_LEVEL0 0x00f00000
+#define NAC_ECC_LEVEL 0x000f0000
+#define NAC_SPARE_SIZE0 0x00003f00
+#define NAC_SPARE_SIZE 0x0000003f
+
+/* nand_config */
+#define NCF_CONFIG_LOCK 0x80000000
+#define NCF_BLOCK_SIZE_MASK 0x70000000
+#define NCF_BLOCK_SIZE_SHIFT 28
+#define NCF_DEVICE_SIZE_MASK 0x0f000000
+#define NCF_DEVICE_SIZE_SHIFT 24
+#define NCF_DEVICE_WIDTH 0x00800000
+#define NCF_PAGE_SIZE_MASK 0x00300000
+#define NCF_PAGE_SIZE_SHIFT 20
+#define NCF_FULL_ADDR_BYTES_MASK 0x00070000
+#define NCF_FULL_ADDR_BYTES_SHIFT 16
+#define NCF_COL_ADDR_BYTES_MASK 0x00007000
+#define NCF_COL_ADDR_BYTES_SHIFT 12
+#define NCF_BLK_ADDR_BYTES_MASK 0x00000700
+#define NCF_BLK_ADDR_BYTES_SHIFT 8
+
+/* nand_intfc_status */
+#define NIST_CTRL_READY 0x80000000
+#define NIST_FLASH_READY 0x40000000
+#define NIST_CACHE_VALID 0x20000000
+#define NIST_SPARE_VALID 0x10000000
+#define NIST_ERASED 0x08000000
+#define NIST_STATUS 0x000000ff
+
+#define NFL_SECTOR_SIZE 512
+
+#define NFL_TABLE_END 0xffffffff
+#define NFL_BOOT_SIZE 0x200000
+#define NFL_BOOT_OS_SIZE 0x2000000
+
+/* Nand flash MLC controller registers (corerev >= 38) */
+#define NAND_REVISION 0xC00
+#define NAND_CMD_START 0xC04
+#define NAND_CMD_ADDR_X 0xC08
+#define NAND_CMD_ADDR 0xC0C
+#define NAND_CMD_END_ADDR 0xC10
+#define NAND_CS_NAND_SELECT 0xC14
+#define NAND_CS_NAND_XOR 0xC18
+#define NAND_SPARE_RD0 0xC20
+#define NAND_SPARE_RD4 0xC24
+#define NAND_SPARE_RD8 0xC28
+#define NAND_SPARE_RD12 0xC2C
+#define NAND_SPARE_WR0 0xC30
+#define NAND_SPARE_WR4 0xC34
+#define NAND_SPARE_WR8 0xC38
+#define NAND_SPARE_WR12 0xC3C
+#define NAND_ACC_CONTROL 0xC40
+#define NAND_CONFIG 0xC48
+#define NAND_TIMING_1 0xC50
+#define NAND_TIMING_2 0xC54
+#define NAND_SEMAPHORE 0xC58
+#define NAND_DEVID 0xC60
+#define NAND_DEVID_X 0xC64
+#define NAND_BLOCK_LOCK_STATUS 0xC68
+#define NAND_INTFC_STATUS 0xC6C
+#define NAND_ECC_CORR_ADDR_X 0xC70
+#define NAND_ECC_CORR_ADDR 0xC74
+#define NAND_ECC_UNC_ADDR_X 0xC78
+#define NAND_ECC_UNC_ADDR 0xC7C
+#define NAND_READ_ERROR_COUNT 0xC80
+#define NAND_CORR_STAT_THRESHOLD 0xC84
+#define NAND_READ_ADDR_X 0xC90
+#define NAND_READ_ADDR 0xC94
+#define NAND_PAGE_PROGRAM_ADDR_X 0xC98
+#define NAND_PAGE_PROGRAM_ADDR 0xC9C
+#define NAND_COPY_BACK_ADDR_X 0xCA0
+#define NAND_COPY_BACK_ADDR 0xCA4
+#define NAND_BLOCK_ERASE_ADDR_X 0xCA8
+#define NAND_BLOCK_ERASE_ADDR 0xCAC
+#define NAND_INV_READ_ADDR_X 0xCB0
+#define NAND_INV_READ_ADDR 0xCB4
+#define NAND_BLK_WR_PROTECT 0xCC0
+#define NAND_ACC_CONTROL_CS1 0xCD0
+#define NAND_CONFIG_CS1 0xCD4
+#define NAND_TIMING_1_CS1 0xCD8
+#define NAND_TIMING_2_CS1 0xCDC
+#define NAND_SPARE_RD16 0xD30
+#define NAND_SPARE_RD20 0xD34
+#define NAND_SPARE_RD24 0xD38
+#define NAND_SPARE_RD28 0xD3C
+#define NAND_CACHE_ADDR 0xD40
+#define NAND_CACHE_DATA 0xD44
+#define NAND_CTRL_CONFIG 0xD48
+#define NAND_CTRL_STATUS 0xD4C
+
+struct bcma_drv_cc;
+
+struct bcm47xx_nflash {
+ struct bcma_drv_cc *bcc;
+
+ bool present;
+ bool boot; /* This is the flash the SoC boots from */
+ u32 blocksize; /* Block size */
+ u32 pagesize; /* Page size */
+
+ u32 size; /* Total size in bytes */
+ u32 next_opcode; /* Next expected command from upper NAND layer */
+
+ struct mtd_info *mtd;
+};
+
+#endif /* LINUX_MTD_BCM47XX_NAND_H_ */

View file

@ -1,527 +0,0 @@
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -143,6 +143,11 @@ config SSB_EMBEDDED
depends on SSB_DRIVER_MIPS
default y
+config SSB_SFLASH
+ bool
+ depends on SSB_DRIVER_MIPS
+ default y
+
config SSB_DRIVER_EXTIF
bool "SSB Broadcom EXTIF core driver"
depends on SSB_DRIVER_MIPS
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
# built-in drivers
ssb-y += driver_chipcommon.o
ssb-y += driver_chipcommon_pmu.o
+ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -0,0 +1,395 @@
+/*
+ * Broadcom specific AMBA
+ * ChipCommon serial flash interface
+ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2010, Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+
+#include "ssb_private.h"
+
+#define NUM_RETRIES 3
+
+static struct resource ssb_sflash_resource = {
+ .name = "ssb_sflash",
+ .start = SSB_FLASH2,
+ .end = 0,
+ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
+};
+
+struct platform_device ssb_sflash_dev = {
+ .name = "bcm47xx-sflash",
+ .resource = &ssb_sflash_resource,
+ .num_resources = 1,
+};
+
+struct ssb_sflash_tbl_e {
+ char *name;
+ u32 id;
+ u32 blocksize;
+ u16 numblocks;
+};
+
+static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+ { "M25P16", 0x14, 0x10000, 32, },
+ { "M25P32", 0x14, 0x10000, 64, },
+ { "M25P64", 0x16, 0x10000, 128, },
+ { "M25FL128", 0x17, 0x10000, 256, },
+ { 0 },
+};
+
+static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+ { "SST25VF010", 0x49, 0x1000, 32, },
+ { "SST25WF020", 3, 0x1000, 64, },
+ { "SST25VF020", 0x43, 0x1000, 64, },
+ { "SST25WF040", 4, 0x1000, 128, },
+ { "SST25VF040", 0x44, 0x1000, 128, },
+ { "SST25VF040B", 0x8d, 0x1000, 128, },
+ { "SST25WF080", 5, 0x1000, 256, },
+ { "SST25VF080B", 0x8e, 0x1000, 256, },
+ { "SST25VF016", 0x41, 0x1000, 512, },
+ { "SST25VF032", 0x4a, 0x1000, 1024, },
+ { "SST25VF064", 0x4b, 0x1000, 2048, },
+ { 0 },
+};
+
+static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+ { "AT45DB081", 0x24, 256, 4096, },
+ { "AT45DB161", 0x2c, 512, 4096, },
+ { "AT45DB321", 0x34, 512, 8192, },
+ { "AT45DB642", 0x3c, 1024, 8192, },
+ { 0 },
+};
+
+static void ssb_sflash_cmd(struct ssb_chipcommon *chipco, u32 opcode)
+{
+ int i;
+ chipco_write32(chipco, SSB_CHIPCO_FLASHCTL,
+ SSB_CHIPCO_FLASHCTL_START | opcode);
+ for (i = 0; i < 1000; i++) {
+ if (!(chipco_read32(chipco, SSB_CHIPCO_FLASHCTL) &
+ SSB_CHIPCO_FLASHCTL_BUSY))
+ return;
+ cpu_relax();
+ }
+ pr_err("SFLASH control command failed (timeout)!\n");
+}
+
+static void ssb_sflash_write_u8(struct ssb_chipcommon *chipco, u32 offset, u8 byte)
+{
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset);
+ chipco_write32(chipco, SSB_CHIPCO_FLASHDATA, byte);
+}
+
+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
+static int ssb_sflash_read(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf)
+{
+ u8 *from, *to;
+ u32 cnt, i;
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ if (!len)
+ return 0;
+
+ if ((offset + len) > chipco->sflash.size)
+ return -EINVAL;
+
+ if ((len >= 4) && (offset & 3))
+ cnt = 4 - (offset & 3);
+ else if ((len >= 4) && ((u32)buf & 3))
+ cnt = 4 - ((u32)buf & 3);
+ else
+ cnt = len;
+
+ from = (u8 *)KSEG0ADDR(SSB_FLASH2 + offset);
+
+ to = (u8 *)buf;
+
+ if (cnt < 4) {
+ for (i = 0; i < cnt; i++) {
+ *to = readb(from);
+ from++;
+ to++;
+ }
+ return cnt;
+ }
+
+ while (cnt >= 4) {
+ *(u32 *)to = readl(from);
+ from += 4;
+ to += 4;
+ cnt -= 4;
+ }
+
+ return len - cnt;
+}
+
+/* Poll for command completion. Returns zero when complete. */
+static int ssb_sflash_poll(struct bcm47xx_sflash *dev, u32 offset)
+{
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ if (offset >= chipco->sflash.size)
+ return -22;
+
+ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ /* Check for ST Write In Progress bit */
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_RDSR);
+ return chipco_read32(chipco, SSB_CHIPCO_FLASHDATA)
+ & SSB_CHIPCO_FLASHDATA_ST_WIP;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ /* Check for Atmel Ready bit */
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_STATUS);
+ return !(chipco_read32(chipco, SSB_CHIPCO_FLASHDATA)
+ & SSB_CHIPCO_FLASHDATA_AT_READY);
+ }
+
+ return 0;
+}
+
+
+static int sflash_st_write(struct bcm47xx_sflash *dev, u32 offset, u32 len,
+ const u8 *buf)
+{
+ int written = 1;
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ /* Enable writes */
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_WREN);
+ ssb_sflash_write_u8(chipco, offset, *buf++);
+ /* Issue a page program with CSA bit set */
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_CSA | SSB_CHIPCO_FLASHCTL_ST_PP);
+ offset++;
+ len--;
+ while (len > 0) {
+ if ((offset & 255) == 0) {
+ /* Page boundary, poll droping cs and return */
+ chipco_write32(chipco, SSB_CHIPCO_FLASHCTL, 0);
+ udelay(1);
+ if (!ssb_sflash_poll(dev, offset)) {
+ /* Flash rejected command */
+ return -EAGAIN;
+ }
+ return written;
+ } else {
+ /* Write single byte */
+ ssb_sflash_cmd(chipco,
+ SSB_CHIPCO_FLASHCTL_ST_CSA |
+ *buf++);
+ }
+ written++;
+ offset++;
+ len--;
+ }
+ /* All done, drop cs & poll */
+ chipco_write32(chipco, SSB_CHIPCO_FLASHCTL, 0);
+ udelay(1);
+ if (!ssb_sflash_poll(dev, offset)) {
+ /* Flash rejected command */
+ return -EAGAIN;
+ }
+ return written;
+}
+
+static int sflash_at_write(struct bcm47xx_sflash *dev, u32 offset, u32 len,
+ const u8 *buf)
+{
+ struct ssb_chipcommon *chipco = dev->scc;
+ u32 page, byte, mask;
+ int ret = 0;
+
+ mask = dev->blocksize - 1;
+ page = (offset & ~mask) << 1;
+ byte = offset & mask;
+ /* Read main memory page into buffer 1 */
+ if (byte || (len < dev->blocksize)) {
+ int i = 100;
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, page);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD);
+ /* 250 us for AT45DB321B */
+ while (i > 0 && ssb_sflash_poll(dev, offset)) {
+ udelay(10);
+ i--;
+ }
+ BUG_ON(!ssb_sflash_poll(dev, offset));
+ }
+ /* Write into buffer 1 */
+ for (ret = 0; (ret < (int)len) && (byte < dev->blocksize); ret++) {
+ ssb_sflash_write_u8(chipco, byte++, *buf++);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE);
+ }
+ /* Write buffer 1 into main memory page */
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, page);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM);
+
+ return ret;
+}
+
+/* Write len bytes starting at offset into buf. Returns number of bytes
+ * written. Caller should poll for completion.
+ */
+static int ssb_sflash_write(struct bcm47xx_sflash *dev, u32 offset, u32 len,
+ const u8 *buf)
+{
+ int ret = 0, tries = NUM_RETRIES;
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ if (!len)
+ return 0;
+
+ if ((offset + len) > chipco->sflash.size)
+ return -EINVAL;
+
+ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ do {
+ ret = sflash_st_write(dev, offset, len, buf);
+ tries--;
+ } while (ret == -EAGAIN && tries > 0);
+
+ if (ret == -EAGAIN && tries == 0) {
+ pr_info("ST Flash rejected write\n");
+ ret = -EIO;
+ }
+ break;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ ret = sflash_at_write(dev, offset, len, buf);
+ break;
+ }
+
+ return ret;
+}
+
+/* Erase a region. Returns number of bytes scheduled for erasure.
+ * Caller should poll for completion.
+ */
+static int ssb_sflash_erase(struct bcm47xx_sflash *dev, u32 offset)
+{
+ struct ssb_chipcommon *chipco = dev->scc;
+
+ if (offset >= chipco->sflash.size)
+ return -EINVAL;
+
+ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_WREN);
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset);
+ /* Newer flashes have "sub-sectors" which can be erased independently
+ * with a new command: ST_SSE. The ST_SE command erases 64KB just as
+ * before.
+ */
+ if (dev->blocksize < (64 * 1024))
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_SSE);
+ else
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_SE);
+ return dev->blocksize;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset << 1);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE);
+ return dev->blocksize;
+ }
+
+ return 0;
+}
+
+/* Initialize serial flash achipcoess */
+int ssb_sflash_init(struct ssb_chipcommon *chipco)
+{
+ struct bcm47xx_sflash *sflash = &chipco->sflash;
+ const struct ssb_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_DP);
+
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, 0);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_RES);
+ id = chipco_read32(chipco, SSB_CHIPCO_FLASHDATA);
+
+ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, 1);
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_RES);
+ id2 = chipco_read32(chipco, SSB_CHIPCO_FLASHDATA);
+
+ switch (id) {
+ case 0xbf:
+ for (e = ssb_sflash_sst_tbl; e->name; e++) {
+ if (e->id == id2)
+ break;
+ }
+ break;
+ case 0x13:
+ return -ENOTSUPP;
+ default:
+ for (e = ssb_sflash_st_tbl; e->name; e++) {
+ if (e->id == id)
+ break;
+ }
+ break;
+ }
+ if (!e->name) {
+ pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2);
+ return -ENOTSUPP;
+ }
+
+ break;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_STATUS);
+ id = chipco_read32(chipco, SSB_CHIPCO_FLASHDATA) & 0x3c;
+
+ for (e = ssb_sflash_at_tbl; e->name; e++) {
+ if (e->id == id)
+ break;
+ }
+ if (!e->name) {
+ pr_err("Unsupported Atmel serial flash (id: 0x%X)\n", id);
+ return -ENOTSUPP;
+ }
+
+ break;
+ default:
+ pr_err("Unsupported flash type\n");
+ return -ENOTSUPP;
+ }
+
+ sflash->window = SSB_FLASH2;
+ sflash->blocksize = e->blocksize;
+ sflash->numblocks = e->numblocks;
+ sflash->size = sflash->blocksize * sflash->numblocks;
+ sflash->present = true;
+ sflash->read = ssb_sflash_read;
+ sflash->poll = ssb_sflash_poll;
+ sflash->write = ssb_sflash_write;
+ sflash->erase = ssb_sflash_erase;
+ sflash->type = BCM47XX_SFLASH_SSB;
+ sflash->scc = chipco;
+
+ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
+ e->name, sflash->size / 1024, sflash->blocksize,
+ sflash->numblocks);
+
+ /* Prepare platform device, but don't register it yet. It's too early,
+ * malloc (required by device_private_init) is not available yet. */
+ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
+ sflash->size;
+ ssb_sflash_dev.dev.platform_data = sflash;
+
+ return 0;
+}
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -203,7 +203,8 @@ static void ssb_mips_flash_detect(struct
switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
case SSB_CHIPCO_FLASHT_STSER:
case SSB_CHIPCO_FLASHT_ATSER:
- pr_err("Serial flash not supported\n");
+ pr_debug("Found serial flash\n");
+ ssb_sflash_init(&bus->chipco);
break;
case SSB_CHIPCO_FLASHT_PARA:
pr_debug("Found parallel flash\n");
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -19,6 +19,7 @@
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
+#include <linux/platform_device.h>
#include <linux/mmc/sdio_func.h>
#include <linux/slab.h>
@@ -540,6 +541,15 @@ static int ssb_devices_register(struct s
dev_idx++;
}
+#ifdef CONFIG_SSB_SFLASH
+ if (bus->chipco.sflash.present) {
+ err = platform_device_register(&ssb_sflash_dev);
+ if (err)
+ ssb_printk(KERN_ERR PFX
+ "Error registering serial flash\n");
+ }
+#endif
+
return 0;
error:
/* Unwind the already registered devices. */
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -242,4 +242,16 @@ static inline int ssb_watchdog_register(
}
#endif /* CONFIG_SSB_EMBEDDED */
+#ifdef CONFIG_SSB_SFLASH
+/* driver_chipcommon_sflash.c */
+int ssb_sflash_init(struct ssb_chipcommon *chipco);
+extern struct platform_device ssb_sflash_dev;
+#else
+static inline int ssb_sflash_init(struct ssb_chipcommon *chipco)
+{
+ pr_err("Serial flash not supported\n");
+ return 0;
+}
+#endif /* CONFIG_SSB_SFLASH */
+
#endif /* LINUX_SSB_PRIVATE_H_ */
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -13,6 +13,8 @@
* Licensed under the GPL version 2. See COPYING for details.
*/
+#include <linux/mtd/bcm47xx_sflash.h>
+
/** ChipCommon core registers. **/
#define SSB_CHIPCO_CHIPID 0x0000
@@ -121,6 +123,17 @@
#define SSB_CHIPCO_FLASHCTL_BUSY SSB_CHIPCO_FLASHCTL_START
#define SSB_CHIPCO_FLASHADDR 0x0044
#define SSB_CHIPCO_FLASHDATA 0x0048
+/* Status register bits for ST flashes */
+#define SSB_CHIPCO_FLASHDATA_ST_WIP 0x01 /* Write In Progress */
+#define SSB_CHIPCO_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */
+#define SSB_CHIPCO_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */
+#define SSB_CHIPCO_FLASHDATA_ST_BP_SHIFT 2
+#define SSB_CHIPCO_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */
+/* Status register bits for Atmel flashes */
+#define SSB_CHIPCO_FLASHDATA_AT_READY 0x80
+#define SSB_CHIPCO_FLASHDATA_AT_MISMATCH 0x40
+#define SSB_CHIPCO_FLASHDATA_AT_ID_MASK 0x38
+#define SSB_CHIPCO_FLASHDATA_AT_ID_SHIFT 3
#define SSB_CHIPCO_BCAST_ADDR 0x0050
#define SSB_CHIPCO_BCAST_DATA 0x0054
#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */
@@ -503,7 +516,7 @@
#define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */
#define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
#define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
-#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
+#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00D9 /* Deep Power-down */
#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */
#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
@@ -593,6 +606,9 @@ struct ssb_chipcommon {
struct ssb_chipcommon_pmu pmu;
u32 ticks_per_ms;
u32 max_timer_ms;
+#ifdef CONFIG_SSB_SFLASH
+ struct bcm47xx_sflash sflash;
+#endif
};
static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)

View file

@ -1,76 +0,0 @@
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -14,6 +14,7 @@
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/time.h>
+#include <linux/platform_device.h>
#include "ssb_private.h"
@@ -186,6 +187,19 @@ static void ssb_mips_serial_init(struct
mcore->nr_serial_ports = 0;
}
+static struct resource ssb_pflash_resource = {
+ .name = "ssb_pflash",
+ .start = 0,
+ .end = 0,
+ .flags = 0,
+};
+
+struct platform_device ssb_pflash_dev = {
+ .name = "bcm47xx-pflash",
+ .resource = &ssb_pflash_resource,
+ .num_resources = 1,
+};
+
static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
{
struct ssb_bus *bus = mcore->dev->bus;
@@ -196,6 +210,9 @@ static void ssb_mips_flash_detect(struct
mcore->pflash.buswidth = 2;
mcore->pflash.window = SSB_FLASH1;
mcore->pflash.window_size = SSB_FLASH1_SZ;
+ ssb_pflash_resource.start = mcore->pflash.window;
+ ssb_pflash_resource.end = mcore->pflash.window +
+ mcore->pflash.window_size;
return;
}
@@ -216,6 +233,9 @@ static void ssb_mips_flash_detect(struct
mcore->pflash.buswidth = 1;
else
mcore->pflash.buswidth = 2;
+ ssb_pflash_resource.start = mcore->pflash.window;
+ ssb_pflash_resource.end = mcore->pflash.window +
+ mcore->pflash.window_size;
break;
}
}
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -549,6 +549,14 @@ static int ssb_devices_register(struct s
"Error registering serial flash\n");
}
#endif
+#ifdef CONFIG_SSB_DRIVER_MIPS
+ if (bus->mipscore.pflash.present) {
+ err = platform_device_register(&ssb_pflash_dev);
+ if (err)
+ ssb_printk(KERN_ERR PFX
+ "Error registering parallel flash\n");
+ }
+#endif
return 0;
error:
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -254,4 +254,6 @@ static inline int ssb_sflash_init(struct
}
#endif /* CONFIG_SSB_SFLASH */
+extern struct platform_device ssb_pflash_dev;
+
#endif /* LINUX_SSB_PRIVATE_H_ */

View file

@ -1,345 +0,0 @@
--- a/drivers/bcma/driver_chipcommon_sflash.c
+++ b/drivers/bcma/driver_chipcommon_sflash.c
@@ -1,15 +1,22 @@
/*
* Broadcom specific AMBA
* ChipCommon serial flash interface
+ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2010, Broadcom Corporation
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include <linux/platform_device.h>
+#include <linux/delay.h>
#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_driver_chipcommon.h>
#include "bcma_private.h"
+#define NUM_RETRIES 3
+
static struct resource bcma_sflash_resource = {
.name = "bcma_sflash",
.start = BCMA_SOC_FLASH2,
@@ -18,7 +25,7 @@ static struct resource bcma_sflash_resou
};
struct platform_device bcma_sflash_dev = {
- .name = "bcma_sflash",
+ .name = "bcm47xx-sflash",
.resource = &bcma_sflash_resource,
.num_resources = 1,
};
@@ -30,7 +37,7 @@ struct bcma_sflash_tbl_e {
u16 numblocks;
};
-static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
{ "M25P20", 0x11, 0x10000, 4, },
{ "M25P40", 0x12, 0x10000, 8, },
@@ -41,7 +48,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
{ 0 },
};
-static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
{ "SST25WF512", 1, 0x1000, 16, },
{ "SST25VF512", 0x48, 0x1000, 16, },
{ "SST25WF010", 2, 0x1000, 32, },
@@ -59,7 +66,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
{ 0 },
};
-static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
{ "AT45DB011", 0xc, 256, 512, },
{ "AT45DB021", 0x14, 256, 1024, },
{ "AT45DB041", 0x1c, 256, 2048, },
@@ -84,12 +91,230 @@ static void bcma_sflash_cmd(struct bcma_
bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
}
+static void bcma_sflash_write_u8(struct bcma_drv_cc *cc, u32 offset, u8 byte)
+{
+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
+ bcma_cc_write32(cc, BCMA_CC_FLASHDATA, byte);
+}
+
+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
+static int bcma_sflash_read(struct bcm47xx_sflash *dev, u32 offset, u32 len, u8 *buf)
+{
+ u8 *from, *to;
+ u32 cnt, i;
+ struct bcma_drv_cc *cc = dev->bcc;
+
+ if (!len)
+ return 0;
+
+ if ((offset + len) > cc->sflash.size)
+ return -EINVAL;
+
+ if ((len >= 4) && (offset & 3))
+ cnt = 4 - (offset & 3);
+ else if ((len >= 4) && ((u32)buf & 3))
+ cnt = 4 - ((u32)buf & 3);
+ else
+ cnt = len;
+
+ from = (u8 *)KSEG0ADDR(BCMA_SOC_FLASH2 + offset);
+
+ to = (u8 *)buf;
+
+ if (cnt < 4) {
+ for (i = 0; i < cnt; i++) {
+ *to = readb(from);
+ from++;
+ to++;
+ }
+ return cnt;
+ }
+
+ while (cnt >= 4) {
+ *(u32 *)to = readl(from);
+ from += 4;
+ to += 4;
+ cnt -= 4;
+ }
+
+ return len - cnt;
+}
+
+/* Poll for command completion. Returns zero when complete. */
+static int bcma_sflash_poll(struct bcm47xx_sflash *dev, u32 offset)
+{
+ struct bcma_drv_cc *cc = dev->bcc;
+
+ if (offset >= cc->sflash.size)
+ return -22;
+
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
+ case BCMA_CC_FLASHT_STSER:
+ /* Check for ST Write In Progress bit */
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RDSR);
+ return bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
+ & BCMA_CC_FLASHDATA_ST_WIP;
+ case BCMA_CC_FLASHT_ATSER:
+ /* Check for Atmel Ready bit */
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
+ return !(bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
+ & BCMA_CC_FLASHDATA_AT_READY);
+ }
+
+ return 0;
+}
+
+
+static int sflash_st_write(struct bcm47xx_sflash *dev, u32 offset, u32 len,
+ const u8 *buf)
+{
+ int written = 1;
+ struct bcma_drv_cc *cc = dev->bcc;
+
+ /* Enable writes */
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
+ bcma_sflash_write_u8(cc, offset, *buf++);
+ /* Issue a page program with CSA bit set */
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_CSA | BCMA_CC_FLASHCTL_ST_PP);
+ offset++;
+ len--;
+ while (len > 0) {
+ if ((offset & 255) == 0) {
+ /* Page boundary, poll droping cs and return */
+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
+ udelay(1);
+ if (!bcma_sflash_poll(dev, offset)) {
+ /* Flash rejected command */
+ return -EAGAIN;
+ }
+ return written;
+ } else {
+ /* Write single byte */
+ bcma_sflash_cmd(cc,
+ BCMA_CC_FLASHCTL_ST_CSA |
+ *buf++);
+ }
+ written++;
+ offset++;
+ len--;
+ }
+ /* All done, drop cs & poll */
+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
+ udelay(1);
+ if (!bcma_sflash_poll(dev, offset)) {
+ /* Flash rejected command */
+ return -EAGAIN;
+ }
+ return written;
+}
+
+static int sflash_at_write(struct bcm47xx_sflash *dev, u32 offset, u32 len,
+ const u8 *buf)
+{
+ struct bcma_drv_cc *cc = dev->bcc;
+ u32 page, byte, mask;
+ int ret = 0;
+
+ mask = dev->blocksize - 1;
+ page = (offset & ~mask) << 1;
+ byte = offset & mask;
+ /* Read main memory page into buffer 1 */
+ if (byte || (len < dev->blocksize)) {
+ int i = 100;
+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_LOAD);
+ /* 250 us for AT45DB321B */
+ while (i > 0 && bcma_sflash_poll(dev, offset)) {
+ udelay(10);
+ i--;
+ }
+ BUG_ON(!bcma_sflash_poll(dev, offset));
+ }
+ /* Write into buffer 1 */
+ for (ret = 0; (ret < (int)len) && (byte < dev->blocksize); ret++) {
+ bcma_sflash_write_u8(cc, byte++, *buf++);
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_WRITE);
+ }
+ /* Write buffer 1 into main memory page */
+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM);
+
+ return ret;
+}
+
+/* Write len bytes starting at offset into buf. Returns number of bytes
+ * written. Caller should poll for completion.
+ */
+static int bcma_sflash_write(struct bcm47xx_sflash *dev, u32 offset, u32 len,
+ const u8 *buf)
+{
+ int ret = 0, tries = NUM_RETRIES;
+ struct bcma_drv_cc *cc = dev->bcc;
+
+ if (!len)
+ return 0;
+
+ if ((offset + len) > cc->sflash.size)
+ return -EINVAL;
+
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
+ case BCMA_CC_FLASHT_STSER:
+ do {
+ ret = sflash_st_write(dev, offset, len, buf);
+ tries--;
+ } while (ret == -EAGAIN && tries > 0);
+
+ if (ret == -EAGAIN && tries == 0) {
+ bcma_info(cc->core->bus, "ST Flash rejected write\n");
+ ret = -EIO;
+ }
+ break;
+ case BCMA_CC_FLASHT_ATSER:
+ ret = sflash_at_write(dev, offset, len, buf);
+ break;
+ }
+
+ return ret;
+}
+
+/* Erase a region. Returns number of bytes scheduled for erasure.
+ * Caller should poll for completion.
+ */
+static int bcma_sflash_erase(struct bcm47xx_sflash *dev, u32 offset)
+{
+ struct bcma_drv_cc *cc = dev->bcc;
+
+ if (offset >= cc->sflash.size)
+ return -EINVAL;
+
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
+ case BCMA_CC_FLASHT_STSER:
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
+ /* Newer flashes have "sub-sectors" which can be erased independently
+ * with a new command: ST_SSE. The ST_SE command erases 64KB just as
+ * before.
+ */
+ if (dev->blocksize < (64 * 1024))
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_SSE);
+ else
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_SE);
+ return dev->blocksize;
+ case BCMA_CC_FLASHT_ATSER:
+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset << 1);
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_PAGE_ERASE);
+ return dev->blocksize;
+ }
+
+ return 0;
+}
+
/* Initialize serial flash access */
int bcma_sflash_init(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
- struct bcma_sflash *sflash = &cc->sflash;
- struct bcma_sflash_tbl_e *e;
+ struct bcm47xx_sflash *sflash = &cc->sflash;
+ const struct bcma_sflash_tbl_e *e;
u32 id, id2;
switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
@@ -150,6 +375,12 @@ int bcma_sflash_init(struct bcma_drv_cc
sflash->numblocks = e->numblocks;
sflash->size = sflash->blocksize * sflash->numblocks;
sflash->present = true;
+ sflash->read = bcma_sflash_read;
+ sflash->poll = bcma_sflash_poll;
+ sflash->write = bcma_sflash_write;
+ sflash->erase = bcma_sflash_erase;
+ sflash->type = BCM47XX_SFLASH_BCMA;
+ sflash->bcc = cc;
bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
e->name, sflash->size / 1024, sflash->blocksize,
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -3,6 +3,8 @@
#include <linux/platform_device.h>
+#include <linux/mtd/bcm47xx_sflash.h>
+
/** ChipCommon core registers. **/
#define BCMA_CC_ID 0x0000
#define BCMA_CC_ID_ID 0x0000FFFF
@@ -518,17 +520,6 @@ struct bcma_pflash {
u32 window_size;
};
-#ifdef CONFIG_BCMA_SFLASH
-struct bcma_sflash {
- bool present;
- u32 window;
- u32 blocksize;
- u16 numblocks;
- u32 size;
-
- struct mtd_info *mtd;
-};
-#endif
#ifdef CONFIG_BCMA_NFLASH
struct mtd_info;
@@ -563,7 +554,7 @@ struct bcma_drv_cc {
#ifdef CONFIG_BCMA_DRIVER_MIPS
struct bcma_pflash pflash;
#ifdef CONFIG_BCMA_SFLASH
- struct bcma_sflash sflash;
+ struct bcm47xx_sflash sflash;
#endif
#ifdef CONFIG_BCMA_NFLASH
struct bcma_nflash nflash;

View file

@ -1,232 +0,0 @@
--- a/drivers/bcma/driver_chipcommon_nflash.c
+++ b/drivers/bcma/driver_chipcommon_nflash.c
@@ -2,16 +2,23 @@
* Broadcom specific AMBA
* ChipCommon NAND flash interface
*
+ * Copyright 2011, Tathagata Das <tathagata@alumnux.com>
+ * Copyright 2010, Broadcom Corporation
+ *
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include <linux/delay.h>
+#include <linux/mtd/bcm47xx_nand.h>
+#include <linux/mtd/nand.h>
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_driver_chipcommon.h>
#include "bcma_private.h"
struct platform_device bcma_nflash_dev = {
- .name = "bcma_nflash",
+ .name = "bcm47xx-nflash",
.num_resources = 0,
};
@@ -31,6 +38,11 @@ int bcma_nflash_init(struct bcma_drv_cc
return -ENODEV;
}
+ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
+ bcma_err(bus, "NAND flash support for BCM4706 not implemented\n");
+ return -ENOTSUPP;
+ }
+
cc->nflash.present = true;
if (cc->core->id.rev == 38 &&
(cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT))
@@ -42,3 +54,141 @@ int bcma_nflash_init(struct bcma_drv_cc
return 0;
}
+
+/* Issue a nand flash command */
+static inline void bcma_nflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
+{
+ bcma_cc_write32(cc, NAND_CMD_START, opcode);
+ bcma_cc_read32(cc, NAND_CMD_START);
+}
+
+/* Check offset and length */
+static int bcma_nflash_offset_is_valid(struct bcma_drv_cc *cc, u32 offset, u32 len, u32 mask)
+{
+ if ((offset & mask) != 0 || (len & mask) != 0) {
+ pr_err("%s(): Address is not aligned. offset: %x, len: %x, mask: %x\n", __func__, offset, len, mask);
+ return 1;
+ }
+
+ if ((((offset + len) >> 20) >= cc->nflash.size) &&
+ (((offset + len) & ((1 << 20) - 1)) != 0)) {
+ pr_err("%s(): Address is outside Flash memory region. offset: %x, len: %x, mask: %x\n", __func__, offset, len, mask);
+ return 1;
+ }
+
+ return 0;
+}
+
+#define NF_RETRIES 1000000
+
+/* Poll for command completion. Returns zero when complete. */
+int bcma_nflash_poll(struct bcma_drv_cc *cc)
+{
+ u32 retries = NF_RETRIES;
+ u32 pollmask = NIST_CTRL_READY|NIST_FLASH_READY;
+ u32 mask;
+
+ while (retries--) {
+ mask = bcma_cc_read32(cc, NAND_INTFC_STATUS) & pollmask;
+ if (mask == pollmask)
+ return 0;
+ cpu_relax();
+ }
+
+ if (!retries) {
+ pr_err("bcma_nflash_poll: not ready\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
+int bcma_nflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len, u8 *buf)
+{
+ u32 mask;
+ int i;
+ u32 *to, val, res;
+
+ mask = NFL_SECTOR_SIZE - 1;
+ if (bcma_nflash_offset_is_valid(cc, offset, len, mask))
+ return 0;
+
+ to = (u32 *)buf;
+ res = len;
+ while (res > 0) {
+ bcma_cc_write32(cc, NAND_CMD_ADDR, offset);
+ bcma_nflash_cmd(cc, NCMD_PAGE_RD);
+ if (bcma_nflash_poll(cc) < 0)
+ break;
+ val = bcma_cc_read32(cc, NAND_INTFC_STATUS);
+ if ((val & NIST_CACHE_VALID) == 0)
+ break;
+ bcma_cc_write32(cc, NAND_CACHE_ADDR, 0);
+ for (i = 0; i < NFL_SECTOR_SIZE; i += 4, to++) {
+ *to = bcma_cc_read32(cc, NAND_CACHE_DATA);
+ }
+ res -= NFL_SECTOR_SIZE;
+ offset += NFL_SECTOR_SIZE;
+ }
+ return (len - res);
+}
+
+/* Write len bytes starting at offset into buf. Returns success (0) or failure (!0).
+ * Should poll for completion.
+ */
+int bcma_nflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
+ const u8 *buf)
+{
+ u32 mask;
+ int i;
+ u32 *from, res, reg;
+
+ mask = cc->nflash.pagesize - 1;
+ if (bcma_nflash_offset_is_valid(cc, offset, len, mask))
+ return 1;
+
+ /* disable partial page enable */
+ reg = bcma_cc_read32(cc, NAND_ACC_CONTROL);
+ reg &= ~NAC_PARTIAL_PAGE_EN;
+ bcma_cc_write32(cc, NAND_ACC_CONTROL, reg);
+
+ from = (u32 *)buf;
+ res = len;
+ while (res > 0) {
+ bcma_cc_write32(cc, NAND_CACHE_ADDR, 0);
+ for (i = 0; i < cc->nflash.pagesize; i += 4, from++) {
+ if (i % 512 == 0)
+ bcma_cc_write32(cc, NAND_CMD_ADDR, i);
+ bcma_cc_write32(cc, NAND_CACHE_DATA, *from);
+ }
+ bcma_cc_write32(cc, NAND_CMD_ADDR, offset + cc->nflash.pagesize - 512);
+ bcma_nflash_cmd(cc, NCMD_PAGE_PROG);
+ if (bcma_nflash_poll(cc) < 0)
+ break;
+ res -= cc->nflash.pagesize;
+ offset += cc->nflash.pagesize;
+ }
+
+ if (res <= 0)
+ return 0;
+ else
+ return (len - res);
+}
+
+/* Erase a region. Returns success (0) or failure (-1).
+ * Poll for completion.
+ */
+int bcma_nflash_erase(struct bcma_drv_cc *cc, u32 offset)
+{
+ if ((offset >> 20) >= cc->nflash.size)
+ return -1;
+ if ((offset & (cc->nflash.blocksize - 1)) != 0)
+ return -1;
+
+ bcma_cc_write32(cc, NAND_CMD_ADDR, offset);
+ bcma_nflash_cmd(cc, NCMD_BLOCK_ERASE);
+ if (bcma_nflash_poll(cc) < 0)
+ return -1;
+ return 0;
+}
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -4,6 +4,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/bcm47xx_sflash.h>
+#include <linux/mtd/bcm47xx_nand.h>
/** ChipCommon core registers. **/
#define BCMA_CC_ID 0x0000
@@ -521,17 +522,6 @@ struct bcma_pflash {
};
-#ifdef CONFIG_BCMA_NFLASH
-struct mtd_info;
-
-struct bcma_nflash {
- bool present;
- bool boot; /* This is the flash the SoC boots from */
-
- struct mtd_info *mtd;
-};
-#endif
-
struct bcma_serial_port {
void *regs;
unsigned long clockspeed;
@@ -557,7 +547,7 @@ struct bcma_drv_cc {
struct bcm47xx_sflash sflash;
#endif
#ifdef CONFIG_BCMA_NFLASH
- struct bcma_nflash nflash;
+ struct bcm47xx_nflash nflash;
#endif
int nr_serial_ports;
@@ -616,4 +606,13 @@ extern void bcma_chipco_regctl_maskset(s
u32 offset, u32 mask, u32 set);
extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
+#ifdef CONFIG_BCMA_NFLASH
+/* Chipcommon nflash support. */
+int bcma_nflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len, u8 *buf);
+int bcma_nflash_poll(struct bcma_drv_cc *cc);
+int bcma_nflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len, const u8 *buf);
+int bcma_nflash_erase(struct bcma_drv_cc *cc, u32 offset);
+int bcma_nflash_commit(struct bcma_drv_cc *cc, u32 offset, u32 len, const u8 *buf);
+#endif
+
#endif /* LINUX_BCMA_DRIVER_CC_H_ */

View file

@ -1,67 +0,0 @@
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -45,6 +45,7 @@ int bcma_sprom_get(struct bcma_bus *bus)
/* driver_chipcommon.c */
#ifdef CONFIG_BCMA_DRIVER_MIPS
void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
+extern struct platform_device bcma_pflash_dev;
#endif /* CONFIG_BCMA_DRIVER_MIPS */
/* driver_chipcommon_pmu.c */
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -18,6 +18,7 @@
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/time.h>
+#include <linux/platform_device.h>
/* The 47162a0 hangs when reading MIPS DMP registers registers */
static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
@@ -178,6 +179,19 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
}
EXPORT_SYMBOL(bcma_cpu_clock);
+static struct resource bcma_pflash_resource = {
+ .name = "bcma_pflash",
+ .start = 0,
+ .end = 0,
+ .flags = 0,
+};
+
+struct platform_device bcma_pflash_dev = {
+ .name = "bcm47xx-pflash",
+ .resource = &bcma_pflash_resource,
+ .num_resources = 1,
+};
+
static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
{
struct bcma_bus *bus = mcore->core->bus;
@@ -200,6 +214,9 @@ static void bcma_core_mips_flash_detect(
cc->pflash.buswidth = 1;
else
cc->pflash.buswidth = 2;
+
+ bcma_pflash_resource.start = cc->pflash.window;
+ bcma_pflash_resource.end = cc->pflash.window + cc->pflash.window_size;
break;
default:
bcma_err(bus, "Flash type not supported\n");
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -149,6 +149,14 @@ static int bcma_register_cores(struct bc
dev_id++;
}
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+ if (bus->drv_cc.pflash.present) {
+ err = platform_device_register(&bcma_pflash_dev);
+ if (err)
+ bcma_err(bus, "Error registering parallel flash\n");
+ }
+#endif
+
#ifdef CONFIG_BCMA_SFLASH
if (bus->drv_cc.sflash.present) {
err = platform_device_register(&bcma_sflash_dev);

View file

@ -1,183 +0,0 @@
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2005 Broadcom Corporation
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -23,69 +23,139 @@
static char nvram_buf[NVRAM_SPACE];
+static u32 find_nvram_size(u32 end)
+{
+ struct nvram_header *header;
+ u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
+ header = (struct nvram_header *)KSEG1ADDR(end - nvram_sizes[i]);
+ if (header->magic == NVRAM_HEADER)
+ return nvram_sizes[i];
+ }
+
+ return 0;
+}
+
/* Probe for NVRAM header */
-static void early_nvram_init(void)
+static void early_nvram_init_fill(u32 base, u32 lim)
{
-#ifdef CONFIG_BCM47XX_SSB
- struct ssb_mipscore *mcore_ssb;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- struct bcma_drv_cc *bcma_cc;
-#endif
struct nvram_header *header;
int i;
- u32 base = 0;
- u32 lim = 0;
u32 off;
u32 *src, *dst;
+ u32 size;
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- mcore_ssb = &bcm47xx_bus.ssb.mipscore;
- base = mcore_ssb->pflash.window;
- lim = mcore_ssb->pflash.window_size;
- break;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
- base = bcma_cc->pflash.window;
- lim = bcma_cc->pflash.window_size;
- break;
-#endif
- }
-
+ /* TODO: when nvram is on nand flash check for bad blocks first. */
off = FLASH_MIN;
while (off <= lim) {
/* Windowed flash access */
- header = (struct nvram_header *)
- KSEG1ADDR(base + off - NVRAM_SPACE);
- if (header->magic == NVRAM_HEADER)
+ size = find_nvram_size(base + off);
+ if (size) {
+ header = (struct nvram_header *)KSEG1ADDR(base + off -
+ size);
goto found;
+ }
off <<= 1;
}
/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
header = (struct nvram_header *) KSEG1ADDR(base + 4096);
- if (header->magic == NVRAM_HEADER)
+ if (header->magic == NVRAM_HEADER) {
+ size = NVRAM_SPACE;
goto found;
+ }
header = (struct nvram_header *) KSEG1ADDR(base + 1024);
- if (header->magic == NVRAM_HEADER)
+ if (header->magic == NVRAM_HEADER) {
+ size = NVRAM_SPACE;
goto found;
+ }
+ pr_err("no nvram found\n");
return;
found:
+
+ if (header->len > size)
+ pr_err("The nvram size accoridng to the header seems to be bigger than the partition on flash\n");
+ if (header->len > NVRAM_SPACE)
+ pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+ header->len, NVRAM_SPACE);
+
src = (u32 *) header;
dst = (u32 *) nvram_buf;
for (i = 0; i < sizeof(struct nvram_header); i += 4)
*dst++ = *src++;
- for (; i < header->len && i < NVRAM_SPACE; i += 4)
+ for (; i < header->len && i < NVRAM_SPACE && i < size; i += 4)
*dst++ = le32_to_cpu(*src++);
}
+#ifdef CONFIG_BCM47XX_BCMA
+static void early_nvram_init_bcma(void)
+{
+ struct bcma_drv_cc *cc = &bcm47xx_bus.bcma.bus.drv_cc;
+ u32 base = 0;
+ u32 lim = 0;
+
+ if (cc->nflash.boot) {
+ base = BCMA_SOC_FLASH1;
+ lim = BCMA_SOC_FLASH1_SZ;
+ } else if (cc->pflash.present) {
+ base = cc->pflash.window;
+ lim = cc->pflash.window_size;
+ } else if (cc->sflash.present) {
+ base = cc->sflash.window;
+ lim = cc->sflash.size;
+ } else {
+ pr_err("No supported flash found\n");
+ return;
+ }
+
+ early_nvram_init_fill(base, lim);
+}
+#endif
+
+#ifdef CONFIG_BCM47XX_SSB
+static void early_nvram_init_ssb(void)
+{
+ struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
+ struct ssb_chipcommon *chipco = &bcm47xx_bus.ssb.chipco;
+ u32 base = 0;
+ u32 lim = 0;
+
+ if (mcore->pflash.present) {
+ base = mcore->pflash.window;
+ lim = mcore->pflash.window_size;
+ } else if (chipco->sflash.present) {
+ base = chipco->sflash.window;
+ lim = chipco->sflash.size;
+ } else {
+ pr_err("No supported flash found\n");
+ return;
+ }
+
+ early_nvram_init_fill(base, lim);
+}
+#endif
+
+static void early_nvram_init(void)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ early_nvram_init_ssb();
+ break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ early_nvram_init_bcma();
+ break;
+#endif
+ }
+}
+
int nvram_getenv(char *name, char *val, size_t val_len)
{
char *var, *value, *end, *eq;

View file

@ -1,69 +0,0 @@
From 9be402f069cc259ad5795b77567d66c4e7f6bef6 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 18 Jul 2010 14:59:24 +0200
Subject: [PATCH 4/6] MIPS: BCM47xx: Setup and register serial early
Swap the first and second serial if console=ttyS1 was set.
Set it up and register it for early serial support.
This patch has been in OpenWRT for a long time.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/setup.c | 39 ++++++++++++++++++++++++++++++++++++++-
1 files changed, 38 insertions(+), 1 deletions(-)
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -31,6 +31,8 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/bcma/bcma_soc.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/time.h>
@@ -121,6 +123,31 @@ static int bcm47xx_get_invariants(struct
return 0;
}
+#ifdef CONFIG_SERIAL_8250
+static void __init bcm47xx_early_serial_setup(struct ssb_mipscore *mcore)
+{
+ int i;
+
+ for (i = 0; i < mcore->nr_serial_ports; i++) {
+ struct ssb_serial_port *port = &(mcore->serial_ports[i]);
+ struct uart_port s;
+
+ memset(&s, 0, sizeof(s));
+ s.line = i;
+ s.mapbase = (unsigned int) port->regs;
+ s.membase = port->regs;
+ s.irq = port->irq + 2;
+ s.uartclk = port->baud_base;
+ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ s.iotype = SERIAL_IO_MEM;
+ s.regshift = port->reg_shift;
+
+ early_serial_setup(&s);
+ }
+ printk(KERN_DEBUG "Serial init done.\n");
+}
+#endif
+
static void __init bcm47xx_register_ssb(void)
{
int err;
@@ -150,6 +177,10 @@ static void __init bcm47xx_register_ssb(
memcpy(&mcore->serial_ports[1], &port, sizeof(port));
}
}
+
+#ifdef CONFIG_SERIAL_8250
+ bcm47xx_early_serial_setup(mcore);
+#endif
}
#endif

View file

@ -1,141 +0,0 @@
From 5219981646071abb6731634bf47781a53e248764 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 18 Jul 2010 15:11:26 +0200
Subject: [PATCH 6/6] MIPS: BCM47xx: Remove CFE console
Do not use the CFE console. It causes hangs on some devices like the
Buffalo WHR-HP-G54.
This was reported in https://dev.openwrt.org/ticket/4061 and
https://forum.openwrt.org/viewtopic.php?id=17063
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/Kconfig | 1 -
arch/mips/bcm47xx/prom.c | 82 +++------------------------------------------
2 files changed, 6 insertions(+), 77 deletions(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -100,7 +100,6 @@ config BCM47XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select GENERIC_GPIO
- select SYS_HAS_EARLY_PRINTK
select CFE
help
Support for BCM47XX based boards
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -31,96 +31,28 @@
#include <asm/fw/cfe/cfe_api.h>
#include <asm/fw/cfe/cfe_error.h>
-static int cfe_cons_handle;
-
const char *get_system_type(void)
{
return "Broadcom BCM47XX";
}
-void prom_putchar(char c)
-{
- while (cfe_write(cfe_cons_handle, &c, 1) == 0)
- ;
-}
-
-static __init void prom_init_cfe(void)
+static __init int prom_init_cfe(void)
{
uint32_t cfe_ept;
uint32_t cfe_handle;
uint32_t cfe_eptseal;
- int argc = fw_arg0;
- char **envp = (char **) fw_arg2;
- int *prom_vec = (int *) fw_arg3;
-
- /*
- * Check if a loader was used; if NOT, the 4 arguments are
- * what CFE gives us (handle, 0, EPT and EPTSEAL)
- */
- if (argc < 0) {
- cfe_handle = (uint32_t)argc;
- cfe_ept = (uint32_t)envp;
- cfe_eptseal = (uint32_t)prom_vec;
- } else {
- if ((int)prom_vec < 0) {
- /*
- * Old loader; all it gives us is the handle,
- * so use the "known" entrypoint and assume
- * the seal.
- */
- cfe_handle = (uint32_t)prom_vec;
- cfe_ept = 0xBFC00500;
- cfe_eptseal = CFE_EPTSEAL;
- } else {
- /*
- * Newer loaders bundle the handle/ept/eptseal
- * Note: prom_vec is in the loader's useg
- * which is still alive in the TLB.
- */
- cfe_handle = prom_vec[0];
- cfe_ept = prom_vec[2];
- cfe_eptseal = prom_vec[3];
- }
- }
+
+ cfe_eptseal = (uint32_t) fw_arg3;
+ cfe_handle = (uint32_t) fw_arg0;
+ cfe_ept = (uint32_t) fw_arg2;
if (cfe_eptseal != CFE_EPTSEAL) {
- /* too early for panic to do any good */
printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
- while (1) ;
+ return -1;
}
cfe_init(cfe_handle, cfe_ept);
-}
-
-static __init void prom_init_console(void)
-{
- /* Initialize CFE console */
- cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
-}
-
-static __init void prom_init_cmdline(void)
-{
- static char buf[COMMAND_LINE_SIZE] __initdata;
-
- /* Get the kernel command line from CFE */
- if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
- buf[COMMAND_LINE_SIZE - 1] = 0;
- strcpy(arcs_cmdline, buf);
- }
-
- /* Force a console handover by adding a console= argument if needed,
- * as CFE is not available anymore later in the boot process. */
- if ((strstr(arcs_cmdline, "console=")) == NULL) {
- /* Try to read the default serial port used by CFE */
- if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
- || (strncmp("uart", buf, 4)))
- /* Default to uart0 */
- strcpy(buf, "uart0");
-
- /* Compute the new command line */
- snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
- arcs_cmdline, buf[4]);
- }
+ return 0;
}
static __init void prom_init_mem(void)
@@ -161,8 +93,6 @@ static __init void prom_init_mem(void)
void __init prom_init(void)
{
prom_init_cfe();
- prom_init_console();
- prom_init_cmdline();
prom_init_mem();
}

View file

@ -1,16 +0,0 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -92,11 +92,13 @@ config ATH79
config BCM47XX
bool "Broadcom BCM47XX based boards"
+ select BOOT_RAW
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
+ select NO_EXCEPT_FILL
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select GENERIC_GPIO

View file

@ -1,367 +0,0 @@
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -17,6 +17,20 @@
#include <asm/cpu-features.h>
#include <asm/mipsmtregs.h>
+#ifdef CONFIG_BCM47XX
+#include <asm/paccess.h>
+#include <linux/ssb/ssb.h>
+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
+
+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
+#else
+#define BCM4710_DUMMY_RREG()
+
+#define BCM4710_FILL_TLB(addr)
+#define BCM4710_PROTECTED_FILL_TLB(addr)
+#endif
+
/*
* This macro return a properly sign-extended address suitable as base address
* for indexed cache operations. Two issues here:
@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
static inline void flush_dcache_line_indexed(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Index_Writeback_Inv_D, addr);
__dflush_epilogue
}
@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
static inline void flush_dcache_line(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Hit_Writeback_Inv_D, addr);
__dflush_epilogue
}
@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
static inline void invalidate_dcache_line(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Hit_Invalidate_D, addr);
__dflush_epilogue
}
@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
*/
static inline void protected_flush_icache_line(unsigned long addr)
{
+ BCM4710_DUMMY_RREG();
protected_cache_op(Hit_Invalidate_I, addr);
}
@@ -219,6 +237,7 @@ static inline void protected_flush_icach
*/
static inline void protected_writeback_dcache_line(unsigned long addr)
{
+ BCM4710_DUMMY_RREG();
protected_cache_op(Hit_Writeback_Inv_D, addr);
}
@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
: "r" (base), \
"i" (op));
+static inline void blast_dcache(void)
+{
+ unsigned long start = KSEG0;
+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
+ unsigned long end = (start + dcache_size);
+
+ do {
+ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, start);
+ start += current_cpu_data.dcache.linesz;
+ } while(start < end);
+}
+
+static inline void blast_dcache_page(unsigned long page)
+{
+ unsigned long start = page;
+ unsigned long end = start + PAGE_SIZE;
+
+ BCM4710_FILL_TLB(start);
+ do {
+ BCM4710_DUMMY_RREG();
+ cache_op(Hit_Writeback_Inv_D, start);
+ start += current_cpu_data.dcache.linesz;
+ } while(start < end);
+}
+
+static inline void blast_dcache_page_indexed(unsigned long page)
+{
+ unsigned long start = page;
+ unsigned long end = start + PAGE_SIZE;
+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
+ unsigned long ws_end = current_cpu_data.dcache.ways <<
+ current_cpu_data.dcache.waybit;
+ unsigned long ws, addr;
+ for (ws = 0; ws < ws_end; ws += ws_inc) {
+ start = page + ws;
+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
+ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, addr);
+ }
+ }
+}
+
+
/* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
static inline void blast_##pfx##cache##lsize(void) \
{ \
unsigned long start = INDEX_BASE; \
@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
\
__##pfx##flush_prologue \
\
+ war \
for (ws = 0; ws < ws_end; ws += ws_inc) \
for (addr = start; addr < end; addr += lsize * 32) \
cache##lsize##_unroll32(addr|ws, indexop); \
@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
\
__##pfx##flush_prologue \
\
+ war \
do { \
cache##lsize##_unroll32(start, hitop); \
start += lsize * 32; \
@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
current_cpu_data.desc.waybit; \
unsigned long ws, addr; \
\
+ war \
+ \
__##pfx##flush_prologue \
\
for (ws = 0; ws < ws_end; ws += ws_inc) \
@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l
__##pfx##flush_epilogue \
}
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64)
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
-
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
+
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
/* build blast_xxx_range, protected_blast_xxx_range */
-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
unsigned long end) \
{ \
unsigned long lsize = cpu_##desc##_line_size(); \
unsigned long addr = start & ~(lsize - 1); \
unsigned long aend = (end - 1) & ~(lsize - 1); \
+ war \
\
__##pfx##flush_prologue \
\
while (1) { \
+ war2 \
prot##cache_op(hitop, addr); \
if (addr == aend) \
break; \
@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca
__##pfx##flush_epilogue \
}
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
/* blast_inv_dcache_range */
-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
#endif /* _ASM_R4KCACHE_H */
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -449,6 +449,10 @@
.macro RESTORE_SP_AND_RET
LONG_L sp, PT_R29(sp)
.set mips3
+#ifdef CONFIG_BCM47XX
+ nop
+ nop
+#endif
eret
.set mips0
.endm
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -52,6 +52,10 @@ NESTED(except_vec1_generic, 0, sp)
NESTED(except_vec3_generic, 0, sp)
.set push
.set noat
+#ifdef CONFIG_BCM47XX
+ nop
+ nop
+#endif
#if R5432_CP0_INTERRUPT_WAR
mfc0 k0, CP0_INDEX
#endif
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -35,6 +35,9 @@
#include <asm/cacheflush.h> /* for run_uncached() */
+/* For enabling BCM4710 cache workarounds */
+int bcm4710 = 0;
+
/*
* Special Variant of smp_call_function for use by cache functions:
*
@@ -111,6 +114,9 @@ static void __cpuinit r4k_blast_dcache_p
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache_page = blast_dcache_page;
+ else
if (dc_lsize == 0)
r4k_blast_dcache_page = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -127,6 +133,9 @@ static void __cpuinit r4k_blast_dcache_p
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
+ else
if (dc_lsize == 0)
r4k_blast_dcache_page_indexed = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -143,6 +152,9 @@ static void __cpuinit r4k_blast_dcache_s
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache = blast_dcache;
+ else
if (dc_lsize == 0)
r4k_blast_dcache = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -683,6 +695,8 @@ static void local_r4k_flush_cache_sigtra
unsigned long addr = (unsigned long) arg;
R4600_HIT_CACHEOP_WAR_IMPL;
+ BCM4710_PROTECTED_FILL_TLB(addr);
+ BCM4710_PROTECTED_FILL_TLB(addr + 4);
if (dc_lsize)
protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
if (!cpu_icache_snoops_remote_store && scache_size)
@@ -1349,6 +1363,17 @@ static void __cpuinit coherency_setup(vo
* silly idea of putting something else there ...
*/
switch (current_cpu_type()) {
+ case CPU_BMIPS3300:
+ {
+ u32 cm;
+ cm = read_c0_diag();
+ /* Enable icache */
+ cm |= (1 << 31);
+ /* Enable dcache */
+ cm |= (1 << 30);
+ write_c0_diag(cm);
+ }
+ break;
case CPU_R4000PC:
case CPU_R4000SC:
case CPU_R4000MC:
@@ -1405,6 +1430,15 @@ void __cpuinit r4k_cache_init(void)
break;
}
+ /* Check if special workarounds are required */
+#ifdef CONFIG_BCM47XX
+ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
+ printk("Enabling BCM4710A0 cache workarounds.\n");
+ bcm4710 = 1;
+ } else
+#endif
+ bcm4710 = 0;
+
probe_pcache();
setup_scache();
@@ -1465,5 +1499,13 @@ void __cpuinit r4k_cache_init(void)
#if !defined(CONFIG_MIPS_CMP)
local_r4k___flush_cache_all(NULL);
#endif
+#ifdef CONFIG_BCM47XX
+ {
+ static void (*_coherency_setup)(void);
+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
+ _coherency_setup();
+ }
+#else
coherency_setup();
+#endif
}
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1264,6 +1264,9 @@ static void __cpuinit build_r4000_tlb_re
/* No need for uasm_i_nop */
}
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+#endif
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
@@ -1794,6 +1797,9 @@ build_r4000_tlbchange_handler_head(u32 *
{
struct work_registers wr = build_get_work_registers(p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
#else

View file

@ -1,77 +0,0 @@
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -110,6 +110,9 @@
#ifndef cpu_has_pindexed_dcache
#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
#endif
+#ifndef cpu_use_kmap_coherent
+#define cpu_use_kmap_coherent 1
+#endif
/*
* I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_use_kmap_coherent 0
+
+#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -507,7 +507,7 @@ static inline void local_r4k_flush_cache
*/
map_coherent = (cpu_has_dc_aliases &&
page_mapped(page) && !Page_dcache_dirty(page));
- if (map_coherent)
+ if (map_coherent && cpu_use_kmap_coherent)
vaddr = kmap_coherent(page, addr);
else
vaddr = kmap_atomic(page, KM_USER0);
@@ -530,7 +530,7 @@ static inline void local_r4k_flush_cache
}
if (vaddr) {
- if (map_coherent)
+ if (map_coherent && cpu_use_kmap_coherent)
kunmap_coherent();
else
kunmap_atomic(vaddr, KM_USER0);
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -208,7 +208,7 @@ void copy_user_highpage(struct page *to,
void *vfrom, *vto;
vto = kmap_atomic(to, KM_USER1);
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapped(from) && !Page_dcache_dirty(from)) {
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
@@ -230,7 +230,7 @@ void copy_to_user_page(struct vm_area_st
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapped(page) && !Page_dcache_dirty(page)) {
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
@@ -248,7 +248,7 @@ void copy_from_user_page(struct vm_area_
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapped(page) && !Page_dcache_dirty(page)) {
void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);

View file

@ -1,12 +0,0 @@
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -209,9 +209,6 @@ void __init check_wait(void)
break;
case CPU_74K:
- cpu_wait = r4k_wait;
- if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
- cpu_wait = r4k_wait_irqoff;
break;
case CPU_TX49XX:

View file

@ -1,362 +0,0 @@
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -633,3 +633,15 @@ config USB_PXA168_EHCI
help
Enable support for Marvell PXA168 SoC's on-chip EHCI
host controller
+
+config USB_HCD_BCMA
+ tristate "BCMA usb host driver"
+ depends on BCMA && EXPERIMENTAL
+ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
+ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
+ help
+ Enbale support for the EHCI and OCHI host controller on an bcma bus.
+ It converts the bcma driver into two platform device drivers
+ for ehci and ohci.
+
+ If unsure, say N.
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -37,3 +37,4 @@ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
+obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
--- /dev/null
+++ b/drivers/usb/host/bcma-hcd.c
@@ -0,0 +1,334 @@
+/*
+ * Broadcom specific Advanced Microcontroller Bus
+ * Broadcom USB-core driver (BCMA bus glue)
+ *
+ * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Based on ssb-ohci driver
+ * Copyright 2007 Michael Buesch <m@bues.ch>
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005-2011 Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+MODULE_AUTHOR("Hauke Mehrtens");
+MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
+MODULE_LICENSE("GPL");
+
+struct bcma_hcd_device {
+ struct platform_device *ehci_dev;
+ struct platform_device *ohci_dev;
+};
+
+/* Wait for bitmask in a register to get set or cleared.
+ * timeout is in units of ten-microseconds.
+ */
+static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
+ int timeout)
+{
+ int i;
+ u32 val;
+
+ for (i = 0; i < timeout; i++) {
+ val = bcma_read32(dev, reg);
+ if ((val & bitmask) == bitmask)
+ return 0;
+ udelay(10);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
+{
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+ /* Work around for 4716 failures. */
+ if (dev->bus->chipinfo.id == 0x4716) {
+ u32 tmp;
+
+ tmp = bcma_cpu_clock(&dev->bus->drv_mips);
+ if (tmp >= 480000000)
+ tmp = 0x1846b; /* set CDR to 0x11(fast) */
+ else if (tmp == 453000000)
+ tmp = 0x1046b; /* set CDR to 0x10(slow) */
+ else
+ tmp = 0;
+
+ /* Change Shim mdio control reg to fix host not acking at
+ * high frequencies
+ */
+ if (tmp) {
+ bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
+ udelay(500);
+
+ bcma_write32(dev, 0x524, tmp);
+ udelay(500);
+ bcma_write32(dev, 0x524, 0x4ab);
+ udelay(500);
+ bcma_read32(dev, 0x528);
+ bcma_write32(dev, 0x528, 0x80000000);
+ }
+ }
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+}
+
+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
+static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
+{
+ u32 tmp;
+
+ /*
+ * USB 2.0 special considerations:
+ *
+ * 1. Since the core supports both OHCI and EHCI functions, it must
+ * only be reset once.
+ *
+ * 2. In addition to the standard SI reset sequence, the Host Control
+ * Register must be programmed to bring the USB core and various
+ * phy components out of reset.
+ */
+ if (!bcma_core_is_enabled(dev)) {
+ bcma_core_enable(dev, 0);
+ mdelay(10);
+ if (dev->id.rev >= 5) {
+ /* Enable Misc PLL */
+ tmp = bcma_read32(dev, 0x1e0);
+ tmp |= 0x100;
+ bcma_write32(dev, 0x1e0, tmp);
+ if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
+ printk(KERN_EMERG "Failed to enable misc PPL!\n");
+
+ /* Take out of resets */
+ bcma_write32(dev, 0x200, 0x4ff);
+ udelay(25);
+ bcma_write32(dev, 0x200, 0x6ff);
+ udelay(25);
+
+ /* Make sure digital and AFE are locked in USB PHY */
+ bcma_write32(dev, 0x524, 0x6b);
+ udelay(50);
+ tmp = bcma_read32(dev, 0x524);
+ udelay(50);
+ bcma_write32(dev, 0x524, 0xab);
+ udelay(50);
+ tmp = bcma_read32(dev, 0x524);
+ udelay(50);
+ bcma_write32(dev, 0x524, 0x2b);
+ udelay(50);
+ tmp = bcma_read32(dev, 0x524);
+ udelay(50);
+ bcma_write32(dev, 0x524, 0x10ab);
+ udelay(50);
+ tmp = bcma_read32(dev, 0x524);
+
+ if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
+ tmp = bcma_read32(dev, 0x528);
+ printk(KERN_EMERG
+ "USB20H mdio_rddata 0x%08x\n", tmp);
+ }
+ bcma_write32(dev, 0x528, 0x80000000);
+ tmp = bcma_read32(dev, 0x314);
+ udelay(265);
+ bcma_write32(dev, 0x200, 0x7ff);
+ udelay(10);
+
+ /* Take USB and HSIC out of non-driving modes */
+ bcma_write32(dev, 0x510, 0);
+ } else {
+ bcma_write32(dev, 0x200, 0x7ff);
+
+ udelay(1);
+ }
+
+ bcma_hcd_4716wa(dev);
+ }
+}
+
+static const struct usb_ehci_pdata ehci_pdata = {
+};
+
+static const struct usb_ohci_pdata ohci_pdata = {
+};
+
+static struct platform_device * __devinit
+bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
+{
+ struct platform_device *hci_dev;
+ struct resource hci_res[2];
+ int ret = -ENOMEM;
+
+ memset(hci_res, 0, sizeof(hci_res));
+
+ hci_res[0].start = addr;
+ hci_res[0].end = hci_res[0].start + 0x1000 - 1;
+ hci_res[0].flags = IORESOURCE_MEM;
+
+ hci_res[1].start = dev->irq;
+ hci_res[1].flags = IORESOURCE_IRQ;
+
+ hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
+ "ehci-platform" , 0);
+ if (!hci_dev)
+ return NULL;
+
+ hci_dev->dev.parent = &dev->dev;
+ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
+
+ ret = platform_device_add_resources(hci_dev, hci_res,
+ ARRAY_SIZE(hci_res));
+ if (ret)
+ goto err_alloc;
+ if (ohci)
+ ret = platform_device_add_data(hci_dev, &ohci_pdata,
+ sizeof(ohci_pdata));
+ else
+ ret = platform_device_add_data(hci_dev, &ehci_pdata,
+ sizeof(ehci_pdata));
+ if (ret)
+ goto err_alloc;
+ ret = platform_device_add(hci_dev);
+ if (ret)
+ goto err_alloc;
+
+ return hci_dev;
+
+err_alloc:
+ platform_device_put(hci_dev);
+ return ERR_PTR(ret);
+}
+
+static int __devinit bcma_hcd_probe(struct bcma_device *dev)
+{
+ int err;
+ u16 chipid_top;
+ u32 ohci_addr;
+ struct bcma_hcd_device *usb_dev;
+ struct bcma_chipinfo *chipinfo;
+
+ chipinfo = &dev->bus->chipinfo;
+ /* USBcores are only connected on embedded devices. */
+ chipid_top = (chipinfo->id & 0xFF00);
+ if (chipid_top != 0x4700 && chipid_top != 0x5300)
+ return -ENODEV;
+
+ /* TODO: Probably need checks here; is the core connected? */
+
+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+ return -EOPNOTSUPP;
+
+ usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
+ if (!usb_dev)
+ return -ENOMEM;
+
+ bcma_hcd_init_chip(dev);
+
+ /* In AI chips EHCI is addrspace 0, OHCI is 1 */
+ ohci_addr = dev->addr1;
+ if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
+ && chipinfo->rev == 0)
+ ohci_addr = 0x18009000;
+
+ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
+ if (IS_ERR(usb_dev->ohci_dev)) {
+ err = PTR_ERR(usb_dev->ohci_dev);
+ goto err_free_usb_dev;
+ }
+
+ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
+ if (IS_ERR(usb_dev->ehci_dev)) {
+ err = PTR_ERR(usb_dev->ehci_dev);
+ goto err_unregister_ohci_dev;
+ }
+
+ bcma_set_drvdata(dev, usb_dev);
+ return 0;
+
+err_unregister_ohci_dev:
+ platform_device_unregister(usb_dev->ohci_dev);
+err_free_usb_dev:
+ kfree(usb_dev);
+ return err;
+}
+
+static void __devexit bcma_hcd_remove(struct bcma_device *dev)
+{
+ struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
+ struct platform_device *ohci_dev = usb_dev->ohci_dev;
+ struct platform_device *ehci_dev = usb_dev->ehci_dev;
+
+ if (ohci_dev)
+ platform_device_unregister(ohci_dev);
+ if (ehci_dev)
+ platform_device_unregister(ehci_dev);
+
+ bcma_core_disable(dev, 0);
+}
+
+static void bcma_hcd_shutdown(struct bcma_device *dev)
+{
+ bcma_core_disable(dev, 0);
+}
+
+#ifdef CONFIG_PM
+
+static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state)
+{
+ bcma_core_disable(dev, 0);
+
+ return 0;
+}
+
+static int bcma_hcd_resume(struct bcma_device *dev)
+{
+ bcma_core_enable(dev, 0);
+
+ return 0;
+}
+
+#else /* !CONFIG_PM */
+#define bcma_hcd_suspend NULL
+#define bcma_hcd_resume NULL
+#endif /* CONFIG_PM */
+
+static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ BCMA_CORETABLE_END
+};
+MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
+
+static struct bcma_driver bcma_hcd_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = bcma_hcd_table,
+ .probe = bcma_hcd_probe,
+ .remove = __devexit_p(bcma_hcd_remove),
+ .shutdown = bcma_hcd_shutdown,
+ .suspend = bcma_hcd_suspend,
+ .resume = bcma_hcd_resume,
+};
+
+static int __init bcma_hcd_init(void)
+{
+ return bcma_driver_register(&bcma_hcd_driver);
+}
+module_init(bcma_hcd_init);
+
+static void __exit bcma_hcd_exit(void)
+{
+ bcma_driver_unregister(&bcma_hcd_driver);
+}
+module_exit(bcma_hcd_exit);

View file

@ -1,308 +0,0 @@
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -645,3 +645,15 @@ config USB_HCD_BCMA
for ehci and ohci.
If unsure, say N.
+
+config USB_HCD_SSB
+ tristate "SSB usb host driver"
+ depends on SSB && EXPERIMENTAL
+ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
+ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
+ help
+ Enbale support for the EHCI and OCHI host controller on an bcma bus.
+ It converts the bcma driver into two platform device drivers
+ for ehci and ohci.
+
+ If unsure, say N.
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-m
obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
+obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
--- /dev/null
+++ b/drivers/usb/host/ssb-hcd.c
@@ -0,0 +1,279 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom USB-core driver (SSB bus glue)
+ *
+ * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Based on ssb-ohci driver
+ * Copyright 2007 Michael Buesch <m@bues.ch>
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005-2011 Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/ssb/ssb.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+MODULE_AUTHOR("Hauke Mehrtens");
+MODULE_DESCRIPTION("Common USB driver for SSB Bus");
+MODULE_LICENSE("GPL");
+
+#define SSB_HCD_TMSLOW_HOSTMODE (1 << 29)
+
+struct ssb_hcd_device {
+ struct platform_device *ehci_dev;
+ struct platform_device *ohci_dev;
+
+ u32 enable_flags;
+};
+
+static void __devinit ssb_hcd_5354wa(struct ssb_device *dev)
+{
+#ifdef CONFIG_SSB_DRIVER_MIPS
+ /* Work around for 5354 failures */
+ if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
+ /* Change syn01 reg */
+ ssb_write32(dev, 0x894, 0x00fe00fe);
+
+ /* Change syn03 reg */
+ ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1);
+ }
+#endif
+}
+
+static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev)
+{
+ if (dev->id.coreid == SSB_DEV_USB20_HOST) {
+ /*
+ * USB 2.0 special considerations:
+ *
+ * In addition to the standard SSB reset sequence, the Host
+ * Control Register must be programmed to bring the USB core
+ * and various phy components out of reset.
+ */
+ ssb_write32(dev, 0x200, 0x7ff);
+
+ /* Change Flush control reg */
+ ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8);
+ ssb_read32(dev, 0x400);
+
+ /* Change Shim control reg */
+ ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100);
+ ssb_read32(dev, 0x304);
+
+ udelay(1);
+
+ ssb_hcd_5354wa(dev);
+ }
+}
+
+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
+static u32 __devinit ssb_hcd_init_chip(struct ssb_device *dev)
+{
+ u32 flags = 0;
+
+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
+ /* Put the device into host-mode. */
+ flags |= SSB_HCD_TMSLOW_HOSTMODE;
+
+ ssb_device_enable(dev, flags);
+
+ ssb_hcd_usb20wa(dev);
+
+ return flags;
+}
+
+static const struct usb_ehci_pdata ehci_pdata = {
+};
+
+static const struct usb_ohci_pdata ohci_pdata = {
+};
+
+static struct platform_device * __devinit
+ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len)
+{
+ struct platform_device *hci_dev;
+ struct resource hci_res[2];
+ int ret = -ENOMEM;
+
+ memset(hci_res, 0, sizeof(hci_res));
+
+ hci_res[0].start = addr;
+ hci_res[0].end = hci_res[0].start + len - 1;
+ hci_res[0].flags = IORESOURCE_MEM;
+
+ hci_res[1].start = dev->irq;
+ hci_res[1].flags = IORESOURCE_IRQ;
+
+ hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
+ "ehci-platform" , 0);
+ if (!hci_dev)
+ return NULL;
+
+ hci_dev->dev.parent = dev->dev;
+ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
+
+ ret = platform_device_add_resources(hci_dev, hci_res,
+ ARRAY_SIZE(hci_res));
+ if (ret)
+ goto err_alloc;
+ if (ohci)
+ ret = platform_device_add_data(hci_dev, &ohci_pdata,
+ sizeof(ohci_pdata));
+ else
+ ret = platform_device_add_data(hci_dev, &ehci_pdata,
+ sizeof(ehci_pdata));
+ if (ret)
+ goto err_alloc;
+ ret = platform_device_add(hci_dev);
+ if (ret)
+ goto err_alloc;
+
+ return hci_dev;
+
+err_alloc:
+ platform_device_put(hci_dev);
+ return ERR_PTR(ret);
+}
+
+static int __devinit ssb_hcd_probe(struct ssb_device *dev,
+ const struct ssb_device_id *id)
+{
+ int err, tmp;
+ int start, len;
+ u16 chipid_top;
+ u16 coreid = dev->id.coreid;
+ struct ssb_hcd_device *usb_dev;
+
+ /* USBcores are only connected on embedded devices. */
+ chipid_top = (dev->bus->chip_id & 0xFF00);
+ if (chipid_top != 0x4700 && chipid_top != 0x5300)
+ return -ENODEV;
+
+ /* TODO: Probably need checks here; is the core connected? */
+
+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+ return -EOPNOTSUPP;
+
+ usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL);
+ if (!usb_dev)
+ return -ENOMEM;
+
+ /* We currently always attach SSB_DEV_USB11_HOSTDEV
+ * as HOST OHCI. If we want to attach it as Client device,
+ * we must branch here and call into the (yet to
+ * be written) Client mode driver. Same for remove(). */
+ usb_dev->enable_flags = ssb_hcd_init_chip(dev);
+
+ tmp = ssb_read32(dev, SSB_ADMATCH0);
+
+ start = ssb_admatch_base(tmp);
+ len = (coreid == SSB_DEV_USB20_HOST) ? 0x800 : ssb_admatch_size(tmp);
+ usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, true, start, len);
+ if (IS_ERR(usb_dev->ohci_dev)) {
+ err = PTR_ERR(usb_dev->ohci_dev);
+ goto err_free_usb_dev;
+ }
+
+ if (coreid == SSB_DEV_USB20_HOST) {
+ start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
+ usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, false, start, len);
+ if (IS_ERR(usb_dev->ehci_dev)) {
+ err = PTR_ERR(usb_dev->ehci_dev);
+ goto err_unregister_ohci_dev;
+ }
+ }
+
+ ssb_set_drvdata(dev, usb_dev);
+ return 0;
+
+err_unregister_ohci_dev:
+ platform_device_unregister(usb_dev->ohci_dev);
+err_free_usb_dev:
+ kfree(usb_dev);
+ return err;
+}
+
+static void __devexit ssb_hcd_remove(struct ssb_device *dev)
+{
+ struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
+ struct platform_device *ohci_dev = usb_dev->ohci_dev;
+ struct platform_device *ehci_dev = usb_dev->ehci_dev;
+
+ if (ohci_dev)
+ platform_device_unregister(ohci_dev);
+ if (ehci_dev)
+ platform_device_unregister(ehci_dev);
+
+ ssb_device_disable(dev, 0);
+}
+
+static void __devexit ssb_hcd_shutdown(struct ssb_device *dev)
+{
+ ssb_device_disable(dev, 0);
+}
+
+#ifdef CONFIG_PM
+
+static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state)
+{
+ ssb_device_disable(dev, 0);
+
+ return 0;
+}
+
+static int ssb_hcd_resume(struct ssb_device *dev)
+{
+ struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
+
+ ssb_device_enable(dev, usb_dev->enable_flags);
+
+ return 0;
+}
+
+#else /* !CONFIG_PM */
+#define ssb_hcd_suspend NULL
+#define ssb_hcd_resume NULL
+#endif /* CONFIG_PM */
+
+static const struct ssb_device_id ssb_hcd_table[] __devinitconst = {
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+ SSB_DEVTABLE_END
+};
+MODULE_DEVICE_TABLE(ssb, ssb_hcd_table);
+
+static struct ssb_driver ssb_hcd_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ssb_hcd_table,
+ .probe = ssb_hcd_probe,
+ .remove = __devexit_p(ssb_hcd_remove),
+ .shutdown = ssb_hcd_shutdown,
+ .suspend = ssb_hcd_suspend,
+ .resume = ssb_hcd_resume,
+};
+
+static int __init ssb_hcd_init(void)
+{
+ return ssb_driver_register(&ssb_hcd_driver);
+}
+module_init(ssb_hcd_init);
+
+static void __exit ssb_hcd_exit(void)
+{
+ ssb_driver_unregister(&ssb_hcd_driver);
+}
+module_exit(ssb_hcd_exit);

View file

@ -1,340 +0,0 @@
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -361,10 +361,15 @@ config USB_OHCI_HCD_PCI
If unsure, say Y.
config USB_OHCI_HCD_SSB
- bool "OHCI support for Broadcom SSB OHCI core"
+ bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
+ select USB_HCD_SSB
+ select USB_OHCI_HCD_PLATFORM
default n
---help---
+ This option is deprecated now and the driver was removed, use
+ USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
+
Support for the Sonics Silicon Backplane (SSB) attached
Broadcom USB OHCI core.
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1081,11 +1081,6 @@ MODULE_LICENSE ("GPL");
#define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
#endif
-#ifdef CONFIG_USB_OHCI_HCD_SSB
-#include "ohci-ssb.c"
-#define SSB_OHCI_DRIVER ssb_ohci_driver
-#endif
-
#ifdef CONFIG_MFD_SM501
#include "ohci-sm501.c"
#define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
@@ -1134,8 +1129,7 @@ MODULE_LICENSE ("GPL");
!defined(SA1111_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(SM501_OHCI_DRIVER) && \
- !defined(TMIO_OHCI_DRIVER) && \
- !defined(SSB_OHCI_DRIVER)
+ !defined(TMIO_OHCI_DRIVER)
#error "missing bus glue for ohci-hcd"
#endif
@@ -1201,12 +1195,6 @@ static int __init ohci_hcd_mod_init(void
goto error_pci;
#endif
-#ifdef SSB_OHCI_DRIVER
- retval = ssb_driver_register(&SSB_OHCI_DRIVER);
- if (retval)
- goto error_ssb;
-#endif
-
#ifdef SM501_OHCI_DRIVER
retval = platform_driver_register(&SM501_OHCI_DRIVER);
if (retval < 0)
@@ -1230,10 +1218,6 @@ static int __init ohci_hcd_mod_init(void
platform_driver_unregister(&SM501_OHCI_DRIVER);
error_sm501:
#endif
-#ifdef SSB_OHCI_DRIVER
- ssb_driver_unregister(&SSB_OHCI_DRIVER);
- error_ssb:
-#endif
#ifdef PCI_DRIVER
pci_unregister_driver(&PCI_DRIVER);
error_pci:
@@ -1281,9 +1265,6 @@ static void __exit ohci_hcd_mod_exit(voi
#ifdef SM501_OHCI_DRIVER
platform_driver_unregister(&SM501_OHCI_DRIVER);
#endif
-#ifdef SSB_OHCI_DRIVER
- ssb_driver_unregister(&SSB_OHCI_DRIVER);
-#endif
#ifdef PCI_DRIVER
pci_unregister_driver(&PCI_DRIVER);
#endif
--- a/drivers/usb/host/ohci-ssb.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * Sonics Silicon Backplane
- * Broadcom USB-core OHCI driver
- *
- * Copyright 2007 Michael Buesch <m@bues.ch>
- *
- * Derived from the OHCI-PCI driver
- * Copyright 1999 Roman Weissgaerber
- * Copyright 2000-2002 David Brownell
- * Copyright 1999 Linus Torvalds
- * Copyright 1999 Gregory P. Smith
- *
- * Derived from the USBcore related parts of Broadcom-SB
- * Copyright 2005 Broadcom Corporation
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-#include <linux/ssb/ssb.h>
-
-
-#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
-
-struct ssb_ohci_device {
- struct ohci_hcd ohci; /* _must_ be at the beginning. */
-
- u32 enable_flags;
-};
-
-static inline
-struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
-{
- return (struct ssb_ohci_device *)(hcd->hcd_priv);
-}
-
-
-static int ssb_ohci_reset(struct usb_hcd *hcd)
-{
- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
- struct ohci_hcd *ohci = &ohcidev->ohci;
- int err;
-
- ohci_hcd_init(ohci);
- err = ohci_init(ohci);
-
- return err;
-}
-
-static int ssb_ohci_start(struct usb_hcd *hcd)
-{
- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
- struct ohci_hcd *ohci = &ohcidev->ohci;
- int err;
-
- err = ohci_run(ohci);
- if (err < 0) {
- ohci_err(ohci, "can't start\n");
- ohci_stop(hcd);
- }
-
- return err;
-}
-
-static const struct hc_driver ssb_ohci_hc_driver = {
- .description = "ssb-usb-ohci",
- .product_desc = "SSB OHCI Controller",
- .hcd_priv_size = sizeof(struct ssb_ohci_device),
-
- .irq = ohci_irq,
- .flags = HCD_MEMORY | HCD_USB11,
-
- .reset = ssb_ohci_reset,
- .start = ssb_ohci_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- .get_frame_number = ohci_get_frame,
-
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
-
- .start_port_reset = ohci_start_port_reset,
-};
-
-static void ssb_ohci_detach(struct ssb_device *dev)
-{
- struct usb_hcd *hcd = ssb_get_drvdata(dev);
-
- if (hcd->driver->shutdown)
- hcd->driver->shutdown(hcd);
- usb_remove_hcd(hcd);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- usb_put_hcd(hcd);
- ssb_device_disable(dev, 0);
-}
-
-static int ssb_ohci_attach(struct ssb_device *dev)
-{
- struct ssb_ohci_device *ohcidev;
- struct usb_hcd *hcd;
- int err = -ENOMEM;
- u32 tmp, flags = 0;
-
- if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
- dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
- return -EOPNOTSUPP;
-
- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
- /* Put the device into host-mode. */
- flags |= SSB_OHCI_TMSLOW_HOSTMODE;
- ssb_device_enable(dev, flags);
- } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
- /*
- * USB 2.0 special considerations:
- *
- * In addition to the standard SSB reset sequence, the Host
- * Control Register must be programmed to bring the USB core
- * and various phy components out of reset.
- */
- ssb_device_enable(dev, 0);
- ssb_write32(dev, 0x200, 0x7ff);
-
- /* Change Flush control reg */
- tmp = ssb_read32(dev, 0x400);
- tmp &= ~8;
- ssb_write32(dev, 0x400, tmp);
- tmp = ssb_read32(dev, 0x400);
-
- /* Change Shim control reg */
- tmp = ssb_read32(dev, 0x304);
- tmp &= ~0x100;
- ssb_write32(dev, 0x304, tmp);
- tmp = ssb_read32(dev, 0x304);
-
- udelay(1);
-
- /* Work around for 5354 failures */
- if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
- /* Change syn01 reg */
- tmp = 0x00fe00fe;
- ssb_write32(dev, 0x894, tmp);
-
- /* Change syn03 reg */
- tmp = ssb_read32(dev, 0x89c);
- tmp |= 0x1;
- ssb_write32(dev, 0x89c, tmp);
- }
- } else
- ssb_device_enable(dev, 0);
-
- hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
- dev_name(dev->dev));
- if (!hcd)
- goto err_dev_disable;
- ohcidev = hcd_to_ssb_ohci(hcd);
- ohcidev->enable_flags = flags;
-
- tmp = ssb_read32(dev, SSB_ADMATCH0);
- hcd->rsrc_start = ssb_admatch_base(tmp);
- hcd->rsrc_len = ssb_admatch_size(tmp);
- hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
- if (!hcd->regs)
- goto err_put_hcd;
- err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
- if (err)
- goto err_iounmap;
-
- ssb_set_drvdata(dev, hcd);
-
- return err;
-
-err_iounmap:
- iounmap(hcd->regs);
-err_put_hcd:
- usb_put_hcd(hcd);
-err_dev_disable:
- ssb_device_disable(dev, flags);
- return err;
-}
-
-static int ssb_ohci_probe(struct ssb_device *dev,
- const struct ssb_device_id *id)
-{
- int err;
- u16 chipid_top;
-
- /* USBcores are only connected on embedded devices. */
- chipid_top = (dev->bus->chip_id & 0xFF00);
- if (chipid_top != 0x4700 && chipid_top != 0x5300)
- return -ENODEV;
-
- /* TODO: Probably need checks here; is the core connected? */
-
- if (usb_disabled())
- return -ENODEV;
-
- /* We currently always attach SSB_DEV_USB11_HOSTDEV
- * as HOST OHCI. If we want to attach it as Client device,
- * we must branch here and call into the (yet to
- * be written) Client mode driver. Same for remove(). */
-
- err = ssb_ohci_attach(dev);
-
- return err;
-}
-
-static void ssb_ohci_remove(struct ssb_device *dev)
-{
- ssb_ohci_detach(dev);
-}
-
-#ifdef CONFIG_PM
-
-static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
-{
- ssb_device_disable(dev, 0);
-
- return 0;
-}
-
-static int ssb_ohci_resume(struct ssb_device *dev)
-{
- struct usb_hcd *hcd = ssb_get_drvdata(dev);
- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-
- ssb_device_enable(dev, ohcidev->enable_flags);
-
- ohci_finish_controller_resume(hcd);
- return 0;
-}
-
-#else /* !CONFIG_PM */
-#define ssb_ohci_suspend NULL
-#define ssb_ohci_resume NULL
-#endif /* CONFIG_PM */
-
-static const struct ssb_device_id ssb_ohci_table[] = {
- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
- SSB_DEVTABLE_END
-};
-MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
-
-static struct ssb_driver ssb_ohci_driver = {
- .name = KBUILD_MODNAME,
- .id_table = ssb_ohci_table,
- .probe = ssb_ohci_probe,
- .remove = ssb_ohci_remove,
- .suspend = ssb_ohci_suspend,
- .resume = ssb_ohci_resume,
-};

View file

@ -1,11 +0,0 @@
--- a/drivers/usb/host/bcma-hcd.c
+++ b/drivers/usb/host/bcma-hcd.c
@@ -45,7 +45,7 @@ static int bcma_wait_bits(struct bcma_de
for (i = 0; i < timeout; i++) {
val = bcma_read32(dev, reg);
- if ((val & bitmask) == bitmask)
+ if ((val & bitmask) == 0)
return 0;
udelay(10);
}

View file

@ -1,33 +0,0 @@
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -27,6 +27,7 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
+#include <linux/smp.h>
#include <asm/bootinfo.h>
#include <asm/fw/cfe/cfe_api.h>
#include <asm/fw/cfe/cfe_error.h>
@@ -59,6 +60,7 @@ static __init void prom_init_mem(void)
{
unsigned long mem;
unsigned long max;
+ struct cpuinfo_mips *c = &current_cpu_data;
/* Figure out memory size by finding aliases.
*
@@ -87,6 +89,14 @@ static __init void prom_init_mem(void)
break;
}
+ /* Ignoring the last page when ddr size is 128M. Cached
+ * accesses to last page is causing the processor to prefetch
+ * using address above 128M stepping out of the ddr address
+ * space.
+ */
+ if (c->cputype == CPU_74K && (mem == (128 << 20)))
+ mem -= 0x1000;
+
add_memory_region(0, mem, BOOT_MEM_RAM);
}

View file

@ -1,38 +0,0 @@
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -1,6 +1,7 @@
/*
* Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
* Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -60,6 +61,7 @@ static __init void prom_init_mem(void)
{
unsigned long mem;
unsigned long max;
+ unsigned long off;
struct cpuinfo_mips *c = &current_cpu_data;
/* Figure out memory size by finding aliases.
@@ -77,15 +79,15 @@ static __init void prom_init_mem(void)
* max contains the biggest possible address supported by the platform.
* If the method wants to try something above we assume 128MB ram.
*/
- max = ((unsigned long)(prom_init) | ((128 << 20) - 1));
+ off = (unsigned long)prom_init;
+ max = off | ((128 << 20) - 1);
for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
- if (((unsigned long)(prom_init) + mem) > max) {
+ if ((off + mem) > max) {
mem = (128 << 20);
printk(KERN_DEBUG "assume 128MB RAM\n");
break;
}
- if (*(unsigned long *)((unsigned long)(prom_init) + mem) ==
- *(unsigned long *)(prom_init))
+ if (!memcmp(prom_init, prom_init + mem, 32))
break;
}

View file

@ -1,81 +0,0 @@
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -164,10 +164,6 @@ static void nvram_read_alpha2(const char
static void bcm47xx_fill_sprom_r1234589(struct ssb_sprom *sprom,
const char *prefix)
{
- nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0);
- if (!sprom->board_rev)
- nvram_read_u16(NULL, NULL, "boardrev", &sprom->board_rev, 0);
- nvram_read_u16(prefix, NULL, "boardnum", &sprom->board_num, 0);
nvram_read_u8(prefix, NULL, "ledbh0", &sprom->gpio0, 0xff);
nvram_read_u8(prefix, NULL, "ledbh1", &sprom->gpio1, 0xff);
nvram_read_u8(prefix, NULL, "ledbh2", &sprom->gpio2, 0xff);
@@ -214,13 +210,6 @@ static void bcm47xx_fill_sprom_r2389(str
nvram_read_u8(prefix, NULL, "pa1himaxpwr", &sprom->maxpwr_ah, 0);
}
-static void bcm47xx_fill_sprom_r2(struct ssb_sprom *sprom, const char *prefix)
-{
- nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo,
- &sprom->boardflags_hi);
- nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0);
-}
-
static void bcm47xx_fill_sprom_r389(struct ssb_sprom *sprom, const char *prefix)
{
nvram_read_u8(prefix, NULL, "bxa2g", &sprom->bxa2g, 0);
@@ -241,9 +230,6 @@ static void bcm47xx_fill_sprom_r389(stru
static void bcm47xx_fill_sprom_r3(struct ssb_sprom *sprom, const char *prefix)
{
- nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo,
- &sprom->boardflags_hi);
- nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0);
nvram_read_u8(prefix, NULL, "regrev", &sprom->regrev, 0);
nvram_read_leddc(prefix, "leddc", &sprom->leddc_on_time,
&sprom->leddc_off_time);
@@ -252,11 +238,6 @@ static void bcm47xx_fill_sprom_r3(struct
static void bcm47xx_fill_sprom_r4589(struct ssb_sprom *sprom,
const char *prefix)
{
- nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo,
- &sprom->boardflags_hi);
- nvram_read_u32_2(prefix, "boardflags2", &sprom->boardflags2_lo,
- &sprom->boardflags2_hi);
- nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0);
nvram_read_u8(prefix, NULL, "regrev", &sprom->regrev, 0);
nvram_read_s8(prefix, NULL, "ag2", &sprom->antenna_gain.a2, 0);
nvram_read_s8(prefix, NULL, "ag3", &sprom->antenna_gain.a3, 0);
@@ -555,9 +536,23 @@ void bcm47xx_fill_sprom_ethernet(struct
nvram_read_macaddr(prefix, "il0macaddr", &sprom->il0mac);
}
+static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix)
+{
+ nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0);
+ if (!sprom->board_rev)
+ nvram_read_u16(NULL, NULL, "boardrev", &sprom->board_rev, 0);
+ nvram_read_u16(prefix, NULL, "boardnum", &sprom->board_num, 0);
+ nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0);
+ nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo,
+ &sprom->boardflags_hi);
+ nvram_read_u32_2(prefix, "boardflags2", &sprom->boardflags2_lo,
+ &sprom->boardflags2_hi);
+}
+
void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix)
{
bcm47xx_fill_sprom_ethernet(sprom, prefix);
+ bcm47xx_fill_board_data(sprom, prefix);
nvram_read_u8(prefix, NULL, "sromrev", &sprom->revision, 0);
@@ -571,7 +566,6 @@ void bcm47xx_fill_sprom(struct ssb_sprom
bcm47xx_fill_sprom_r1234589(sprom, prefix);
bcm47xx_fill_sprom_r12389(sprom, prefix);
bcm47xx_fill_sprom_r2389(sprom, prefix);
- bcm47xx_fill_sprom_r2(sprom, prefix);
break;
case 3:
bcm47xx_fill_sprom_r1234589(sprom, prefix);

View file

@ -1,11 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -206,6 +206,8 @@ static int bcm47xx_get_sprom_bcma(struct
snprintf(prefix, sizeof(prefix), "sb/%u/",
core->core_index);
bcm47xx_fill_sprom(out, prefix);
+ } else {
+ bcm47xx_fill_sprom(out, NULL);
}
return 0;
default:

View file

@ -1,54 +0,0 @@
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -410,10 +410,34 @@ static void b44_wap54g10_workaround(stru
error:
pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
}
+
+static void b44_bcm47xx_workarounds(struct b44 *bp)
+{
+ char buf[20];
+ struct ssb_device *sdev = bp->sdev;
+
+ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
+ if (sdev->bus->sprom.board_num == 100) {
+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
+ } else {
+ /* WL-HDD */
+ if (nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
+ !strncmp(buf, "WL300-", strlen("WL300-"))) {
+ if (sdev->bus->sprom.et0phyaddr == 0 &&
+ sdev->bus->sprom.et1phyaddr == 1)
+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
+ }
+ }
+ return;
+}
#else
static inline void b44_wap54g10_workaround(struct b44 *bp)
{
}
+
+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
+{
+}
#endif
static int b44_setup_phy(struct b44 *bp)
@@ -422,6 +446,7 @@ static int b44_setup_phy(struct b44 *bp)
int err;
b44_wap54g10_workaround(bp);
+ b44_bcm47xx_workarounds(bp);
if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
return 0;
@@ -2088,6 +2113,8 @@ static int __devinit b44_get_invariants(
* valid PHY address. */
bp->phy_addr &= 0x1F;
+ b44_bcm47xx_workarounds(bp);
+
memcpy(bp->dev->dev_addr, addr, 6);
if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){

View file

@ -1,15 +0,0 @@
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -187,10 +187,11 @@ static int b44_wait_bit(struct b44 *bp,
udelay(10);
}
if (i == timeout) {
+#if 0
if (net_ratelimit())
netdev_err(bp->dev, "BUG! Timeout waiting for bit %08x of register %lx to %s\n",
bit, reg, clear ? "clear" : "set");
-
+#endif
return -ENODEV;
}
return 0;

View file

@ -1,104 +0,0 @@
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
@@ -94,19 +94,19 @@ static int bcma_extpci_read_config(struc
if (dev == 0) {
/* we support only two functions on device 0 */
if (func > 1)
- return -EINVAL;
+ goto out;
/* accesses to config registers with offsets >= 256
* requires indirect access.
*/
if (off >= PCI_CONFIG_SPACE_SIZE) {
addr = (func << 12);
- addr |= (off & 0x0FFF);
+ addr |= (off & 0x0FFC);
val = bcma_pcie_read_config(pc, addr);
} else {
addr = BCMA_CORE_PCI_PCICFG0;
addr |= (func << 8);
- addr |= (off & 0xfc);
+ addr |= (off & 0xFC);
val = pcicore_read32(pc, addr);
}
} else {
@@ -122,8 +122,6 @@ static int bcma_extpci_read_config(struc
val = 0xffffffff;
goto unmap;
}
-
- val = readl(mmio);
}
val >>= (8 * (off & 3));
@@ -151,7 +149,7 @@ static int bcma_extpci_write_config(stru
const void *buf, int len)
{
int err = -EINVAL;
- u32 addr = 0, val = 0;
+ u32 addr, val;
void __iomem *mmio = 0;
u16 chipid = pc->core->bus->chipinfo.id;
@@ -159,16 +157,22 @@ static int bcma_extpci_write_config(stru
if (unlikely(len != 1 && len != 2 && len != 4))
goto out;
if (dev == 0) {
+ /* we support only two functions on device 0 */
+ if (func > 1)
+ goto out;
+
/* accesses to config registers with offsets >= 256
* requires indirect access.
*/
- if (off < PCI_CONFIG_SPACE_SIZE) {
- addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0;
+ if (off >= PCI_CONFIG_SPACE_SIZE) {
+ addr = (func << 12);
+ addr |= (off & 0x0FFC);
+ val = bcma_pcie_read_config(pc, addr);
+ } else {
+ addr = BCMA_CORE_PCI_PCICFG0;
addr |= (func << 8);
- addr |= (off & 0xfc);
- mmio = ioremap_nocache(addr, sizeof(val));
- if (!mmio)
- goto out;
+ addr |= (off & 0xFC);
+ val = pcicore_read32(pc, addr);
}
} else {
addr = bcma_get_cfgspace_addr(pc, dev, func, off);
@@ -187,12 +191,10 @@ static int bcma_extpci_write_config(stru
switch (len) {
case 1:
- val = readl(mmio);
val &= ~(0xFF << (8 * (off & 3)));
val |= *((const u8 *)buf) << (8 * (off & 3));
break;
case 2:
- val = readl(mmio);
val &= ~(0xFFFF << (8 * (off & 3)));
val |= *((const u16 *)buf) << (8 * (off & 3));
break;
@@ -200,13 +202,14 @@ static int bcma_extpci_write_config(stru
val = *((const u32 *)buf);
break;
}
- if (dev == 0 && !addr) {
+ if (dev == 0) {
/* accesses to config registers with offsets >= 256
* requires indirect access.
*/
- addr = (func << 12);
- addr |= (off & 0x0FFF);
- bcma_pcie_write_config(pc, addr, val);
+ if (off >= PCI_CONFIG_SPACE_SIZE)
+ bcma_pcie_write_config(pc, addr, val);
+ else
+ pcicore_write32(pc, addr, val);
} else {
writel(val, mmio);

View file

@ -1,25 +0,0 @@
This prevents the options from being delete with make kernel_oldconfig.
---
drivers/ssb/Kconfig | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -37,6 +37,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
config BCMA_HOST_SOC
bool
depends on BCMA_DRIVER_MIPS
+ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
config BCMA_DRIVER_MIPS
bool "BCMA Broadcom MIPS core driver"
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -146,6 +146,7 @@ config SSB_EMBEDDED
config SSB_SFLASH
bool
depends on SSB_DRIVER_MIPS
+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
default y
config SSB_DRIVER_EXTIF

View file

@ -1,11 +0,0 @@
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -32,7 +32,7 @@
extern void (*flush_cache_all)(void);
extern void (*__flush_cache_all)(void);
extern void (*flush_cache_mm)(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
extern void (*flush_cache_range)(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);

View file

@ -1,66 +0,0 @@
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -48,6 +48,7 @@
#ifndef __ASSEMBLY__
#include <linux/pfn.h>
+#include <asm/cpu-features.h>
#include <asm/io.h>
extern void build_clear_page(void);
@@ -83,13 +84,16 @@ static inline void clear_user_page(void
flush_data_cache_page((unsigned long)addr);
}
-extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
- struct page *to);
-struct vm_area_struct;
-extern void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma);
+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *to)
+{
+ extern void (*flush_data_cache_page)(unsigned long addr);
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+ copy_page(vto, vfrom);
+ if (!cpu_has_ic_fills_f_dc ||
+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+ flush_data_cache_page((unsigned long)vto);
+}
/*
* These are used to make use of C type-checking..
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -202,30 +202,6 @@ void kunmap_coherent(void)
preempt_check_resched();
}
-void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma)
-{
- void *vfrom, *vto;
-
- vto = kmap_atomic(to, KM_USER1);
- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(from) && !Page_dcache_dirty(from)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
- kunmap_coherent();
- } else {
- vfrom = kmap_atomic(from, KM_USER0);
- copy_page(vto, vfrom);
- kunmap_atomic(vfrom, KM_USER0);
- }
- if ((!cpu_has_ic_fills_f_dc) ||
- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
- flush_data_cache_page((unsigned long)vto);
- kunmap_atomic(vto, KM_USER1);
- /* Make sure this page is cleared on other CPU's too before using it */
- smp_wmb();
-}
-
void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)

View file

@ -1,33 +0,0 @@
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -183,3 +183,30 @@ int nvram_getenv(char *name, char *val,
return NVRAM_ERR_ENVNOTFOUND;
}
EXPORT_SYMBOL(nvram_getenv);
+
+char *nvram_get(const char *name)
+{
+ char *var, *value, *end, *eq;
+
+ if (!name)
+ return NULL;
+
+ if (!nvram_buf[0])
+ early_nvram_init();
+
+ /* Look for name=value and return value */
+ var = &nvram_buf[sizeof(struct nvram_header)];
+ end = nvram_buf + sizeof(nvram_buf) - 2;
+ end[0] = end[1] = '\0';
+ for (; *var; var = value + strlen(value) + 1) {
+ eq = strchr(var, '=');
+ if (!eq)
+ break;
+ value = eq + 1;
+ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
+ return value;
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL(nvram_get);

View file

@ -1,40 +0,0 @@
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -171,6 +171,18 @@ u32 ssb_gpio_polarity(struct ssb_bus *bu
}
EXPORT_SYMBOL(ssb_gpio_polarity);
+int ssb_gpio_count(struct ssb_bus *bus)
+{
+ if (ssb_chipco_available(&bus->chipco))
+ return SSB_GPIO_CHIPCO_LINES;
+ else if (ssb_extif_available(&bus->extif))
+ return SSB_GPIO_EXTIF_LINES;
+ else
+ SSB_WARN_ON(1);
+ return 0;
+}
+EXPORT_SYMBOL(ssb_gpio_count);
+
#ifdef CONFIG_SSB_DRIVER_GIGE
static int gige_pci_init_callback(struct ssb_bus *bus, unsigned long data)
{
--- a/include/linux/ssb/ssb_embedded.h
+++ b/include/linux/ssb/ssb_embedded.h
@@ -7,6 +7,9 @@
extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks);
+#define SSB_GPIO_EXTIF_LINES 5
+#define SSB_GPIO_CHIPCO_LINES 16
+
/* Generic GPIO API */
u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask);
u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value);
@@ -14,5 +17,6 @@ u32 ssb_gpio_outen(struct ssb_bus *bus,
u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value);
u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value);
u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value);
+int ssb_gpio_count(struct ssb_bus *bus);
#endif /* LINUX_SSB_EMBEDDED_H_ */

View file

@ -1,140 +0,0 @@
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -158,6 +158,8 @@ void bcma_core_chipcommon_init(struct bc
}
cc->ticks_per_ms = bcma_chipco_watchdog_ticks_per_ms(cc);
+ spin_lock_init(&cc->gpio_lock);
+
cc->setup_done = true;
}
@@ -197,34 +199,81 @@ u32 bcma_chipco_irq_status(struct bcma_d
u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask)
{
- return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
+ unsigned long flags;
+ u32 res;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_in);
u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
+ unsigned long flags;
+ u32 res;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
+ unsigned long flags;
+ u32 res;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
+ unsigned long flags;
+ u32 res;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
}
EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
+ unsigned long flags;
+ u32 res;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_intmask);
u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
- return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+ unsigned long flags;
+ u32 res;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_polarity);
#ifdef CONFIG_BCMA_DRIVER_MIPS
void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -555,6 +555,9 @@ struct bcma_drv_cc {
#endif /* CONFIG_BCMA_DRIVER_MIPS */
u32 ticks_per_ms;
struct platform_device *watchdog;
+
+ /* Lock for GPIO register access. */
+ spinlock_t gpio_lock;
};
/* Register access */
@@ -584,13 +587,22 @@ void bcma_chipco_irq_mask(struct bcma_dr
u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+#define BCMA_CC_GPIO_LINES 16
+
/* Chipcommon GPIO pin access. */
-u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
-u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
-u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
-u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
-u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
-u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
+extern u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
+extern u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
+extern u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
+extern u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask,
+ u32 value);
+extern u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask,
+ u32 value);
+extern u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask,
+ u32 value);
+static inline int bcma_chipco_gpio_count(void)
+{
+ return BCMA_CC_GPIO_LINES;
+}
/* PMU support */
extern void bcma_pmu_init(struct bcma_drv_cc *cc);

View file

@ -1,493 +0,0 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -92,6 +92,7 @@ config ATH79
config BCM47XX
bool "Broadcom BCM47XX based boards"
+ select ARCH_REQUIRE_GPIOLIB
select BOOT_RAW
select CEVT_R4K
select CSRC_R4K
@@ -101,7 +102,6 @@ config BCM47XX
select NO_EXCEPT_FILL
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_GPIO
select CFE
help
Support for BCM47XX based boards
--- a/arch/mips/bcm47xx/gpio.c
+++ b/arch/mips/bcm47xx/gpio.c
@@ -4,83 +4,154 @@
* for more details.
*
* Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Parts of this file are based on Atheros AR71XX/AR724X/AR913X GPIO
*/
#include <linux/export.h>
+#include <linux/gpio.h>
#include <linux/ssb/ssb.h>
-#include <linux/ssb/ssb_driver_chipcommon.h>
-#include <linux/ssb/ssb_driver_extif.h>
-#include <asm/mach-bcm47xx/bcm47xx.h>
-#include <asm/mach-bcm47xx/gpio.h>
+#include <linux/ssb/ssb_embedded.h>
+#include <linux/bcma/bcma.h>
+
+#include <bcm47xx.h>
-#if (BCM47XX_CHIPCO_GPIO_LINES > BCM47XX_EXTIF_GPIO_LINES)
-static DECLARE_BITMAP(gpio_in_use, BCM47XX_CHIPCO_GPIO_LINES);
-#else
-static DECLARE_BITMAP(gpio_in_use, BCM47XX_EXTIF_GPIO_LINES);
-#endif
-int gpio_request(unsigned gpio, const char *tag)
+static unsigned long bcm47xx_gpio_count;
+
+/* low level BCM47xx gpio api */
+u32 bcm47xx_gpio_in(u32 mask)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
- if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
- return -EINVAL;
-
- if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
- return -EINVAL;
-
- if (test_and_set_bit(gpio, gpio_in_use))
- return -EBUSY;
-
- return 0;
+ return ssb_gpio_in(&bcm47xx_bus.ssb, mask);
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
- if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
- return -EINVAL;
-
- if (test_and_set_bit(gpio, gpio_in_use))
- return -EBUSY;
+ return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc, mask);
+#endif
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(bcm47xx_gpio_in);
- return 0;
+u32 bcm47xx_gpio_out(u32 mask, u32 value)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_gpio_out(&bcm47xx_bus.ssb, mask, value);
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ return bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, mask,
+ value);
#endif
}
return -EINVAL;
}
-EXPORT_SYMBOL(gpio_request);
+EXPORT_SYMBOL(bcm47xx_gpio_out);
-void gpio_free(unsigned gpio)
+u32 bcm47xx_gpio_outen(u32 mask, u32 value)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
- if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
- return;
+ return ssb_gpio_outen(&bcm47xx_bus.ssb, mask, value);
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ return bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc,
+ mask, value);
+#endif
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(bcm47xx_gpio_outen);
- if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
- return;
+u32 bcm47xx_gpio_control(u32 mask, u32 value)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_gpio_control(&bcm47xx_bus.ssb, mask, value);
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ return bcma_chipco_gpio_control(&bcm47xx_bus.bcma.bus.drv_cc,
+ mask, value);
+#endif
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(bcm47xx_gpio_control);
- clear_bit(gpio, gpio_in_use);
- return;
+u32 bcm47xx_gpio_intmask(u32 mask, u32 value)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_gpio_intmask(&bcm47xx_bus.ssb, mask, value);
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
- if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
- return;
+ return bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc,
+ mask, value);
+#endif
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(bcm47xx_gpio_intmask);
- clear_bit(gpio, gpio_in_use);
- return;
+u32 bcm47xx_gpio_polarity(u32 mask, u32 value)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_gpio_polarity(&bcm47xx_bus.ssb, mask, value);
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ return bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc,
+ mask, value);
#endif
}
+ return -EINVAL;
+}
+EXPORT_SYMBOL(bcm47xx_gpio_polarity);
+
+
+static int bcm47xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ return bcm47xx_gpio_in(1 << gpio);
+}
+
+static void bcm47xx_gpio_set_value(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ bcm47xx_gpio_out(1 << gpio, value ? 1 << gpio : 0);
+}
+
+static int bcm47xx_gpio_direction_input(struct gpio_chip *chip,
+ unsigned gpio)
+{
+ bcm47xx_gpio_outen(1 << gpio, 0);
+ return 0;
+}
+
+static int bcm47xx_gpio_direction_output(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ /* first set the gpio out value */
+ bcm47xx_gpio_out(1 << gpio, value ? 1 << gpio : 0);
+ /* then set the gpio mode */
+ bcm47xx_gpio_outen(1 << gpio, 1 << gpio);
+ return 0;
}
-EXPORT_SYMBOL(gpio_free);
-int gpio_to_irq(unsigned gpio)
+static int bcm47xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
@@ -99,4 +170,55 @@ int gpio_to_irq(unsigned gpio)
}
return -EINVAL;
}
-EXPORT_SYMBOL_GPL(gpio_to_irq);
+
+static struct gpio_chip bcm47xx_gpio_chip = {
+ .label = "bcm47xx",
+ .get = bcm47xx_gpio_get_value,
+ .set = bcm47xx_gpio_set_value,
+ .direction_input = bcm47xx_gpio_direction_input,
+ .direction_output = bcm47xx_gpio_direction_output,
+ .to_irq = bcm47xx_gpio_to_irq,
+ .base = 0,
+};
+
+void __init bcm47xx_gpio_init(void)
+{
+ int err;
+
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ bcm47xx_gpio_count = ssb_gpio_count(&bcm47xx_bus.ssb);
+ break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcm47xx_gpio_count = bcma_chipco_gpio_count();
+ break;
+#endif
+ }
+
+ bcm47xx_gpio_chip.ngpio = bcm47xx_gpio_count;
+
+ err = gpiochip_add(&bcm47xx_gpio_chip);
+ if (err)
+ panic("cannot add BCM47xx GPIO chip, error=%d", err);
+}
+
+int gpio_get_value(unsigned gpio)
+{
+ if (gpio < bcm47xx_gpio_count)
+ return bcm47xx_gpio_in(1 << gpio);
+
+ return __gpio_get_value(gpio);
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+void gpio_set_value(unsigned gpio, int value)
+{
+ if (gpio < bcm47xx_gpio_count)
+ bcm47xx_gpio_out(1 << gpio, value ? 1 << gpio : 0);
+ else
+ __gpio_set_value(gpio, value);
+}
+EXPORT_SYMBOL(gpio_set_value);
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -252,6 +252,8 @@ void __init plat_mem_setup(void)
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
+
+ bcm47xx_gpio_init();
}
static int __init bcm47xx_register_bus_complete(void)
--- a/arch/mips/bcm47xx/wgt634u.c
+++ b/arch/mips/bcm47xx/wgt634u.c
@@ -133,6 +133,7 @@ static int __init wgt634u_init(void)
* been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
*/
u8 *et0mac;
+ int err;
if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
return -ENODEV;
@@ -146,6 +147,12 @@ static int __init wgt634u_init(void)
printk(KERN_INFO "WGT634U machine detected.\n");
+ err = gpio_request(WGT634U_GPIO_RESET, "reset-buton");
+ if (err) {
+ printk(KERN_INFO "Can not register gpio for reset button\n");
+ return 0;
+ }
+
if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
gpio_interrupt, IRQF_SHARED,
"WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -56,4 +56,6 @@ void bcm47xx_fill_bcma_boardinfo(struct
const char *prefix);
#endif
+void bcm47xx_gpio_init(void);
+
#endif /* __ASM_BCM47XX_H */
--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
@@ -4,152 +4,42 @@
* for more details.
*
* Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
*/
#ifndef __BCM47XX_GPIO_H
#define __BCM47XX_GPIO_H
-#include <linux/ssb/ssb_embedded.h>
-#include <linux/bcma/bcma.h>
-#include <asm/mach-bcm47xx/bcm47xx.h>
-
-#define BCM47XX_EXTIF_GPIO_LINES 5
-#define BCM47XX_CHIPCO_GPIO_LINES 16
-
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
-extern int gpio_to_irq(unsigned gpio);
-
-static inline int gpio_get_value(unsigned gpio)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc,
- 1 << gpio);
-#endif
- }
- return -EINVAL;
-}
-
-#define gpio_get_value_cansleep gpio_get_value
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
- value ? 1 << gpio : 0);
- return;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
- value ? 1 << gpio : 0);
- return;
-#endif
- }
-}
-
-#define gpio_set_value_cansleep gpio_set_value
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return 0;
-}
-
-static inline int gpio_is_valid(unsigned gpio)
-{
- return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES);
-}
+#define ARCH_NR_GPIOS 64
+#include <asm-generic/gpio.h>
+/* low level BCM47xx gpio api */
+u32 bcm47xx_gpio_in(u32 mask);
+u32 bcm47xx_gpio_out(u32 mask, u32 value);
+u32 bcm47xx_gpio_outen(u32 mask, u32 value);
+u32 bcm47xx_gpio_control(u32 mask, u32 value);
+u32 bcm47xx_gpio_intmask(u32 mask, u32 value);
+u32 bcm47xx_gpio_polarity(u32 mask, u32 value);
-static inline int gpio_direction_input(unsigned gpio)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
- return 0;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
- 0);
- return 0;
-#endif
- }
- return -EINVAL;
-}
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
-static inline int gpio_direction_output(unsigned gpio, int value)
+static inline void gpio_intmask(unsigned gpio, int value)
{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- /* first set the gpio out value */
- ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
- value ? 1 << gpio : 0);
- /* then set the gpio mode */
- ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
- return 0;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- /* first set the gpio out value */
- bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
- value ? 1 << gpio : 0);
- /* then set the gpio mode */
- bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
- 1 << gpio);
- return 0;
-#endif
- }
- return -EINVAL;
+ bcm47xx_gpio_intmask(1 << gpio, value ? 1 << gpio : 0);
}
-static inline int gpio_intmask(unsigned gpio, int value)
+static inline void gpio_polarity(unsigned gpio, int value)
{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
- value ? 1 << gpio : 0);
- return 0;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc,
- 1 << gpio, value ? 1 << gpio : 0);
- return 0;
-#endif
- }
- return -EINVAL;
+ bcm47xx_gpio_polarity(1 << gpio, value ? 1 << gpio : 0);
}
-static inline int gpio_polarity(unsigned gpio, int value)
+static inline int irq_to_gpio(int gpio)
{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
- value ? 1 << gpio : 0);
- return 0;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc,
- 1 << gpio, value ? 1 << gpio : 0);
- return 0;
-#endif
- }
return -EINVAL;
}
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
#endif /* __BCM47XX_GPIO_H */

View file

@ -1,14 +0,0 @@
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st
hw->io_ports.ctl_addr = ctl_addr;
}
+#if defined CONFIG_BCM47XX
+# define MAX_HWIFS 2
+#else
#define MAX_HWIFS 10
+#endif
/*
* Now for the data we need to maintain per-drive: ide_drive_t

View file

@ -1,439 +0,0 @@
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -44,6 +44,7 @@
#include <linux/prefetch.h>
#include <linux/dma-mapping.h>
#include <linux/firmware.h>
+#include <linux/ssb/ssb_driver_gige.h>
#include <net/checksum.h>
#include <net/ip.h>
@@ -249,6 +250,7 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_t
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5705F)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5721)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5722)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751M)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751F)},
@@ -530,7 +532,9 @@ static void _tw32_flush(struct tg3 *tp,
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
{
tp->write32_mbox(tp, off, val);
- if (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND))
+ if (tg3_flag(tp, FLUSH_POSTED_WRITES) ||
+ (!tg3_flag(tp, MBOX_WRITE_REORDER) &&
+ !tg3_flag(tp, ICH_WORKAROUND)))
tp->read32_mbox(tp, off);
}
@@ -540,7 +544,8 @@ static void tg3_write32_tx_mbox(struct t
writel(val, mbox);
if (tg3_flag(tp, TXD_MBOX_HWBUG))
writel(val, mbox);
- if (tg3_flag(tp, MBOX_WRITE_REORDER))
+ if (tg3_flag(tp, MBOX_WRITE_REORDER) ||
+ tg3_flag(tp, FLUSH_POSTED_WRITES))
readl(mbox);
}
@@ -948,7 +953,8 @@ static void tg3_switch_clocks(struct tg3
#define PHY_BUSY_LOOPS 5000
-static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
+static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg,
+ u32 *val)
{
u32 frame_val;
unsigned int loops;
@@ -962,7 +968,7 @@ static int tg3_readphy(struct tg3 *tp, i
*val = 0x0;
- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -997,7 +1003,13 @@ static int tg3_readphy(struct tg3 *tp, i
return ret;
}
-static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
+static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
+{
+ return __tg3_readphy(tp, tp->phy_addr, reg, val);
+}
+
+static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg,
+ u32 val)
{
u32 frame_val;
unsigned int loops;
@@ -1013,7 +1025,7 @@ static int tg3_writephy(struct tg3 *tp,
udelay(80);
}
- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -1046,6 +1058,11 @@ static int tg3_writephy(struct tg3 *tp,
return ret;
}
+static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
+{
+ return __tg3_writephy(tp, tp->phy_addr, reg, val);
+}
+
static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val)
{
int err;
@@ -1608,6 +1625,11 @@ static int tg3_poll_fw(struct tg3 *tp)
int i;
u32 val;
+ if (tg3_flag(tp, IS_SSB_CORE)) {
+ /* We don't use firmware. */
+ return 0;
+ }
+
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
/* Wait up to 20ms for init done. */
for (i = 0; i < 200; i++) {
@@ -3015,6 +3037,11 @@ static int tg3_halt_cpu(struct tg3 *tp,
tw32_f(offset + CPU_MODE, CPU_MODE_HALT);
udelay(10);
} else {
+ /* There is only an Rx CPU for the 5750 derivative in the
+ * BCM4785. */
+ if (tg3_flag(tp, IS_SSB_CORE))
+ return 0;
+
for (i = 0; i < 10000; i++) {
tw32(offset + CPU_STATE, 0xffffffff);
tw32(offset + CPU_MODE, CPU_MODE_HALT);
@@ -3029,9 +3056,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
return -ENODEV;
}
- /* Clear firmware's nvram arbitration. */
- if (tg3_flag(tp, NVRAM))
- tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
+ if (!tg3_flag(tp, IS_SSB_CORE)) {
+ /* Clear firmware's nvram arbitration. */
+ if (tg3_flag(tp, NVRAM))
+ tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
+ }
+
return 0;
}
@@ -3094,6 +3124,11 @@ static int tg3_load_5701_a0_firmware_fix
const __be32 *fw_data;
int err, i;
+ if (tg3_flag(tp, IS_SSB_CORE)) {
+ /* We don't use firmware. */
+ return 0;
+ }
+
fw_data = (void *)tp->fw->data;
/* Firmware blob starts with version numbers, followed by
@@ -3150,6 +3185,11 @@ static int tg3_load_tso_firmware(struct
unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
int err, i;
+ if (tg3_flag(tp, IS_SSB_CORE)) {
+ /* We don't use firmware. */
+ return 0;
+ }
+
if (tg3_flag(tp, HW_TSO_1) ||
tg3_flag(tp, HW_TSO_2) ||
tg3_flag(tp, HW_TSO_3))
@@ -3496,8 +3536,9 @@ static int tg3_power_down_prepare(struct
tg3_frob_aux_power(tp, true);
/* Workaround for unstable PLL clock */
- if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
- (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) {
+ if ((!tg3_flag(tp, IS_SSB_CORE)) &&
+ ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
+ (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) {
u32 val = tr32(0x7d00);
val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
@@ -4011,6 +4052,14 @@ relink:
if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
tg3_phy_copper_begin(tp);
+ if (tg3_flag(tp, ROBOSWITCH)) {
+ current_link_up = 1;
+ current_speed = SPEED_1000; /* FIXME */
+ current_duplex = DUPLEX_FULL;
+ tp->link_config.active_speed = current_speed;
+ tp->link_config.active_duplex = current_duplex;
+ }
+
tg3_readphy(tp, MII_BMSR, &bmsr);
if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) ||
(tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
@@ -4029,6 +4078,26 @@ relink:
else
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
+ /* In order for the 5750 core in BCM4785 chip to work properly
+ * in RGMII mode, the Led Control Register must be set up.
+ */
+ if (tg3_flag(tp, RGMII_MODE)) {
+ u32 led_ctrl = tr32(MAC_LED_CTRL);
+ led_ctrl &= ~(LED_CTRL_1000MBPS_ON | LED_CTRL_100MBPS_ON);
+
+ if (tp->link_config.active_speed == SPEED_10)
+ led_ctrl |= LED_CTRL_LNKLED_OVERRIDE;
+ else if (tp->link_config.active_speed == SPEED_100)
+ led_ctrl |= (LED_CTRL_LNKLED_OVERRIDE |
+ LED_CTRL_100MBPS_ON);
+ else if (tp->link_config.active_speed == SPEED_1000)
+ led_ctrl |= (LED_CTRL_LNKLED_OVERRIDE |
+ LED_CTRL_1000MBPS_ON);
+
+ tw32(MAC_LED_CTRL, led_ctrl);
+ udelay(40);
+ }
+
tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
if (tp->link_config.active_duplex == DUPLEX_HALF)
tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
@@ -7833,6 +7902,14 @@ static int tg3_chip_reset(struct tg3 *tp
tw32(0x5000, 0x400);
}
+ if (tg3_flag(tp, IS_SSB_CORE)) {
+ /* BCM4785: In order to avoid repercussions from using
+ * potentially defective internal ROM, stop the Rx RISC CPU,
+ * which is not required. */
+ tg3_stop_fw(tp);
+ tg3_halt_cpu(tp, RX_CPU_BASE);
+ }
+
tw32(GRC_MODE, tp->grc_mode);
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
@@ -9247,6 +9324,11 @@ static void tg3_timer(unsigned long __op
tg3_flag(tp, 57765_CLASS))
tg3_chk_missed_msi(tp);
+ if (tg3_flag(tp, FLUSH_POSTED_WRITES)) {
+ /* BCM4785: Flush posted writes from GbE to host memory. */
+ tr32(HOSTCC_MODE);
+ }
+
if (!tg3_flag(tp, TAGGED_STATUS)) {
/* All of this garbage is because when using non-tagged
* IRQ status the mailbox/status_block protocol the chip
@@ -10959,6 +11041,11 @@ static int tg3_test_nvram(struct tg3 *tp
if (tg3_flag(tp, NO_NVRAM))
return 0;
+ if (tg3_flag(tp, IS_SSB_CORE)) {
+ /* We don't have NVRAM. */
+ return 0;
+ }
+
if (tg3_nvram_read(tp, 0, &magic) != 0)
return -EIO;
@@ -11916,11 +12003,12 @@ static int tg3_ioctl(struct net_device *
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
break; /* We have no PHY */
- if (!netif_running(dev))
+ if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
return -EAGAIN;
spin_lock_bh(&tp->lock);
- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
+ err = __tg3_readphy(tp, data->phy_id & 0x1f,
+ data->reg_num & 0x1f, &mii_regval);
spin_unlock_bh(&tp->lock);
data->val_out = mii_regval;
@@ -11932,11 +12020,12 @@ static int tg3_ioctl(struct net_device *
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
break; /* We have no PHY */
- if (!netif_running(dev))
+ if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
return -EAGAIN;
spin_lock_bh(&tp->lock);
- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
+ err = __tg3_writephy(tp, data->phy_id & 0x1f,
+ data->reg_num & 0x1f, data->val_in);
spin_unlock_bh(&tp->lock);
return err;
@@ -12670,6 +12759,13 @@ static void __devinit tg3_get_5720_nvram
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
static void __devinit tg3_nvram_init(struct tg3 *tp)
{
+ if (tg3_flag(tp, IS_SSB_CORE)) {
+ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
+ tg3_flag_clear(tp, NVRAM);
+ tg3_flag_clear(tp, NVRAM_BUFFERED);
+ return;
+ }
+
tw32_f(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
@@ -12936,6 +13032,9 @@ static int tg3_nvram_write_block(struct
{
int ret;
+ if (tg3_flag(tp, IS_SSB_CORE))
+ return -ENODEV;
+
if (tg3_flag(tp, EEPROM_WRITE_PROT)) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
~GRC_LCLCTRL_GPIO_OUTPUT1);
@@ -13394,10 +13493,19 @@ static int __devinit tg3_phy_probe(struc
* subsys device table.
*/
p = tg3_lookup_by_subsys(tp);
- if (!p)
+ if (p) {
+ tp->phy_id = p->phy_id;
+ } else if (!tg3_flag(tp, IS_SSB_CORE)) {
+ /* For now we saw the IDs 0xbc050cd0,
+ * 0xbc050f80 and 0xbc050c30 on devices
+ * connected to an BCM4785 and there are
+ * probably more. Just assume that the phy is
+ * supported when it is connected to a SSB core
+ * for now.
+ */
return -ENODEV;
+ }
- tp->phy_id = p->phy_id;
if (!tp->phy_id ||
tp->phy_id == TG3_PHY_ID_BCM8002)
tp->phy_flags |= TG3_PHYFLG_PHY_SERDES;
@@ -14382,6 +14490,11 @@ static int __devinit tg3_get_invariants(
}
}
+ if (tg3_flag(tp, FLUSH_POSTED_WRITES)) {
+ tp->write32_tx_mbox = tg3_write_flush_reg32;
+ tp->write32_rx_mbox = tg3_write_flush_reg32;
+ }
+
/* Get eeprom hw config before calling tg3_set_power_state().
* In particular, the TG3_FLAG_IS_NIC flag must be
* determined before calling tg3_set_power_state() so that
@@ -14798,6 +14911,10 @@ static int __devinit tg3_get_device_addr
}
if (!is_valid_ether_addr(&dev->dev_addr[0])) {
+ if (tg3_flag(tp, IS_SSB_CORE))
+ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
+ }
+ if (!is_valid_ether_addr(&dev->dev_addr[0])) {
#ifdef CONFIG_SPARC
if (!tg3_get_default_macaddr_sparc(tp))
return 0;
@@ -15082,7 +15199,8 @@ static int __devinit tg3_test_dma(struct
if (tg3_flag(tp, 40BIT_DMA_BUG) &&
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
tp->dma_rwctrl |= 0x8000;
- else if (ccval == 0x6 || ccval == 0x7)
+ else if ((ccval == 0x6 || ccval == 0x7) ||
+ tg3_flag(tp, ONE_DMA_AT_ONCE))
tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703)
@@ -15506,6 +15624,17 @@ static int __devinit tg3_init_one(struct
tp->msg_enable = tg3_debug;
else
tp->msg_enable = TG3_DEF_MSG_ENABLE;
+ if (pdev_is_ssb_gige_core(pdev)) {
+ tg3_flag_set(tp, IS_SSB_CORE);
+ if (ssb_gige_must_flush_posted_writes(pdev))
+ tg3_flag_set(tp, FLUSH_POSTED_WRITES);
+ if (ssb_gige_one_dma_at_once(pdev))
+ tg3_flag_set(tp, ONE_DMA_AT_ONCE);
+ if (ssb_gige_have_roboswitch(pdev))
+ tg3_flag_set(tp, ROBOSWITCH);
+ if (ssb_gige_is_rgmii(pdev))
+ tg3_flag_set(tp, RGMII_MODE);
+ }
/* The word/byte swap controls here control register access byte
* swapping. DMA data byte swapping is controlled in the GRC_MODE
--- a/drivers/net/ethernet/broadcom/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
@@ -2940,6 +2940,11 @@ enum TG3_FLAGS {
TG3_FLAG_57765_PLUS,
TG3_FLAG_57765_CLASS,
TG3_FLAG_5717_PLUS,
+ TG3_FLAG_IS_SSB_CORE,
+ TG3_FLAG_FLUSH_POSTED_WRITES,
+ TG3_FLAG_ROBOSWITCH,
+ TG3_FLAG_ONE_DMA_AT_ONCE,
+ TG3_FLAG_RGMII_MODE,
/* Add new flags before this comment and TG3_FLAG_NUMBER_OF_FLAGS */
TG3_FLAG_NUMBER_OF_FLAGS, /* Last entry in enum TG3_FLAGS */
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2120,6 +2120,7 @@
#define PCI_DEVICE_ID_TIGON3_5754M 0x1672
#define PCI_DEVICE_ID_TIGON3_5755M 0x1673
#define PCI_DEVICE_ID_TIGON3_5756 0x1674
+#define PCI_DEVICE_ID_TIGON3_5750 0x1676
#define PCI_DEVICE_ID_TIGON3_5751 0x1677
#define PCI_DEVICE_ID_TIGON3_5715 0x1678
#define PCI_DEVICE_ID_TIGON3_5715S 0x1679
--- a/include/linux/ssb/ssb_driver_gige.h
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -97,21 +97,12 @@ static inline bool ssb_gige_must_flush_p
return 0;
}
-#ifdef CONFIG_BCM47XX
-#include <asm/mach-bcm47xx/nvram.h>
-/* Get the device MAC address */
-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
-{
- char buf[20];
- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
- return;
- nvram_parse_macaddr(buf, macaddr);
-}
-#else
static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+
+ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
}
-#endif
extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
struct pci_dev *pdev);
@@ -175,6 +166,9 @@ static inline bool ssb_gige_must_flush_p
{
return 0;
}
+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+}
#endif /* CONFIG_SSB_DRIVER_GIGE */
#endif /* LINUX_SSB_DRIVER_GIGE_H_ */

View file

@ -1,187 +0,0 @@
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -4,4 +4,3 @@
#
obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
-obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
--- a/arch/mips/bcm47xx/wgt634u.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
-#include <linux/ssb/ssb.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/gpio.h>
-#include <asm/mach-bcm47xx/bcm47xx.h>
-
-/* GPIO definitions for the WGT634U */
-#define WGT634U_GPIO_LED 3
-#define WGT634U_GPIO_RESET 2
-#define WGT634U_GPIO_TP1 7
-#define WGT634U_GPIO_TP2 6
-#define WGT634U_GPIO_TP3 5
-#define WGT634U_GPIO_TP4 4
-#define WGT634U_GPIO_TP5 1
-
-static struct gpio_led wgt634u_leds[] = {
- {
- .name = "power",
- .gpio = WGT634U_GPIO_LED,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
-};
-
-static struct gpio_led_platform_data wgt634u_led_data = {
- .num_leds = ARRAY_SIZE(wgt634u_leds),
- .leds = wgt634u_leds,
-};
-
-static struct platform_device wgt634u_gpio_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &wgt634u_led_data,
- }
-};
-
-
-/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
- firmware. */
-static struct mtd_partition wgt634u_partitions[] = {
- {
- .name = "cfe",
- .offset = 0,
- .size = 0x60000, /* 384k */
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "config",
- .offset = 0x60000,
- .size = 0x20000 /* 128k */
- },
- {
- .name = "linux",
- .offset = 0x80000,
- .size = 0x140000 /* 1280k */
- },
- {
- .name = "jffs",
- .offset = 0x1c0000,
- .size = 0x620000 /* 6272k */
- },
- {
- .name = "nvram",
- .offset = 0x7e0000,
- .size = 0x20000 /* 128k */
- },
-};
-
-static struct physmap_flash_data wgt634u_flash_data = {
- .parts = wgt634u_partitions,
- .nr_parts = ARRAY_SIZE(wgt634u_partitions)
-};
-
-static struct resource wgt634u_flash_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device wgt634u_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = { .platform_data = &wgt634u_flash_data, },
- .resource = &wgt634u_flash_resource,
- .num_resources = 1,
-};
-
-/* Platform devices */
-static struct platform_device *wgt634u_devices[] __initdata = {
- &wgt634u_flash,
- &wgt634u_gpio_leds,
-};
-
-static irqreturn_t gpio_interrupt(int irq, void *ignored)
-{
- int state;
-
- /* Interrupts are shared, check if the current one is
- a GPIO interrupt. */
- if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
- SSB_CHIPCO_IRQ_GPIO))
- return IRQ_NONE;
-
- state = gpio_get_value(WGT634U_GPIO_RESET);
-
- /* Interrupt are level triggered, revert the interrupt polarity
- to clear the interrupt. */
- gpio_polarity(WGT634U_GPIO_RESET, state);
-
- if (!state) {
- printk(KERN_INFO "Reset button pressed");
- ctrl_alt_del();
- }
-
- return IRQ_HANDLED;
-}
-
-static int __init wgt634u_init(void)
-{
- /* There is no easy way to detect that we are running on a WGT634U
- * machine. Use the MAC address as an heuristic. Netgear Inc. has
- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
- */
- u8 *et0mac;
- int err;
-
- if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
- return -ENODEV;
-
- et0mac = bcm47xx_bus.ssb.sprom.et0mac;
-
- if (et0mac[0] == 0x00 &&
- ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
- (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
- struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
-
- printk(KERN_INFO "WGT634U machine detected.\n");
-
- err = gpio_request(WGT634U_GPIO_RESET, "reset-buton");
- if (err) {
- printk(KERN_INFO "Can not register gpio for reset button\n");
- return 0;
- }
-
- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
- gpio_interrupt, IRQF_SHARED,
- "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
- gpio_direction_input(WGT634U_GPIO_RESET);
- gpio_intmask(WGT634U_GPIO_RESET, 1);
- ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
- SSB_CHIPCO_IRQ_GPIO,
- SSB_CHIPCO_IRQ_GPIO);
- }
-
- wgt634u_flash_data.width = mcore->pflash.buswidth;
- wgt634u_flash_resource.start = mcore->pflash.window;
- wgt634u_flash_resource.end = mcore->pflash.window
- + mcore->pflash.window_size
- - 1;
- return platform_add_devices(wgt634u_devices,
- ARRAY_SIZE(wgt634u_devices));
- } else
- return -ENODEV;
-}
-
-module_init(wgt634u_init);

View file

@ -1,306 +0,0 @@
The Netgear wgt634u uses a different format for storing the
configuration. This patch is needed to read out the correct
configuration. The cfe_env.c file uses a different method way to read
out the configuration than the in kernel cfe config reader.
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,4 +3,4 @@
# under Linux.
#
-obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+obj-y += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o sprom.o cfe_env.o
--- /dev/null
+++ b/arch/mips/bcm47xx/cfe_env.c
@@ -0,0 +1,229 @@
+/*
+ * CFE environment variable access
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define NVRAM_SIZE (0x1ff0)
+static char _nvdata[NVRAM_SIZE];
+static char _valuestr[256];
+
+/*
+ * TLV types. These codes are used in the "type-length-value"
+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
+ *
+ * The layout of the flash/nvram is as follows:
+ *
+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
+ *
+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
+ * The "length" field marks the length of the data section, not
+ * including the type and length fields.
+ *
+ * Environment variables are stored as follows:
+ *
+ * <type_env> <length> <flags> <name> = <value>
+ *
+ * If bit 0 (low bit) is set, the length is an 8-bit value.
+ * If bit 0 (low bit) is clear, the length is a 16-bit value
+ *
+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
+ * indicates the size of the length field.
+ *
+ * Flags are from the constants below:
+ *
+ */
+#define ENV_LENGTH_16BITS 0x00 /* for low bit */
+#define ENV_LENGTH_8BITS 0x01
+
+#define ENV_TYPE_USER 0x80
+
+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
+
+/*
+ * The actual TLV types we support
+ */
+
+#define ENV_TLV_TYPE_END 0x00
+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
+
+/*
+ * Environment variable flags
+ */
+
+#define ENV_FLG_NORMAL 0x00 /* normal read/write */
+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
+
+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
+
+
+/* *********************************************************************
+ * _nvram_read(buffer,offset,length)
+ *
+ * Read data from the NVRAM device
+ *
+ * Input parameters:
+ * buffer - destination buffer
+ * offset - offset of data to read
+ * length - number of bytes to read
+ *
+ * Return value:
+ * number of bytes read, or <0 if error occured
+ ********************************************************************* */
+static int
+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
+{
+ int i;
+ if (offset > NVRAM_SIZE)
+ return -1;
+
+ for ( i = 0; i < length; i++) {
+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
+ }
+ return length;
+}
+
+
+static char*
+_strnchr(const char *dest,int c,size_t cnt)
+{
+ while (*dest && (cnt > 0)) {
+ if (*dest == c) return (char *) dest;
+ dest++;
+ cnt--;
+ }
+ return NULL;
+}
+
+
+
+/*
+ * Core support API: Externally visible.
+ */
+
+/*
+ * Get the value of an NVRAM variable
+ * @param name name of variable to get
+ * @return value of variable or NULL if undefined
+ */
+
+char*
+cfe_env_get(unsigned char *nv_buf, char* name)
+{
+ int size;
+ unsigned char *buffer;
+ unsigned char *ptr;
+ unsigned char *envval;
+ unsigned int reclen;
+ unsigned int rectype;
+ int offset;
+ int flg;
+
+ if (!strcmp(name, "nvram_type"))
+ return "cfe";
+
+ size = NVRAM_SIZE;
+ buffer = &_nvdata[0];
+
+ ptr = buffer;
+ offset = 0;
+
+ /* Read the record type and length */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+
+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
+
+ /* Adjust pointer for TLV type */
+ rectype = *(ptr);
+ offset++;
+ size--;
+
+ /*
+ * Read the length. It can be either 1 or 2 bytes
+ * depending on the code
+ */
+ if (rectype & ENV_LENGTH_8BITS) {
+ /* Read the record type and length - 8 bits */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+ reclen = *(ptr);
+ size--;
+ offset++;
+ }
+ else {
+ /* Read the record type and length - 16 bits, MSB first */
+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
+ goto error;
+ }
+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
+ size -= 2;
+ offset += 2;
+ }
+
+ if (reclen > size)
+ break; /* should not happen, bad NVRAM */
+
+ switch (rectype) {
+ case ENV_TLV_TYPE_ENV:
+ /* Read the TLV data */
+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
+ goto error;
+ flg = *ptr++;
+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
+ if (envval) {
+ *envval++ = '\0';
+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
+ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
+#if 0
+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
+#endif
+ if(!strcmp(ptr, name)){
+ return _valuestr;
+ }
+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
+ return _valuestr;
+ }
+ break;
+
+ default:
+ /* Unknown TLV type, skip it. */
+ break;
+ }
+
+ /*
+ * Advance to next TLV
+ */
+
+ size -= (int)reclen;
+ offset += reclen;
+
+ /* Read the next record type */
+ ptr = buffer;
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
+ goto error;
+ }
+
+error:
+ return NULL;
+
+}
+
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -22,6 +22,8 @@
#include <asm/mach-bcm47xx/bcm47xx.h>
static char nvram_buf[NVRAM_SPACE];
+static int cfe_env;
+extern char *cfe_env_get(char *nv_buf, const char *name);
static u32 find_nvram_size(u32 end)
{
@@ -47,6 +49,26 @@ static void early_nvram_init_fill(u32 ba
u32 *src, *dst;
u32 size;
+ cfe_env = 0;
+
+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
+ if (lim >= 8 * 1024 * 1024) {
+ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
+ dst = (u32 *) nvram_buf;
+
+ if ((*src & 0xff00ff) == 0x000001) {
+ printk("early_nvram_init: WGT634U NVRAM found.\n");
+
+ for (i = 0; i < 0x1ff0; i++) {
+ if (*src == 0xFFFFFFFF)
+ break;
+ *dst++ = *src++;
+ }
+ cfe_env = 1;
+ return;
+ }
+ }
+
/* TODO: when nvram is on nand flash check for bad blocks first. */
off = FLASH_MIN;
while (off <= lim) {
@@ -166,6 +188,12 @@ int nvram_getenv(char *name, char *val,
if (!nvram_buf[0])
early_nvram_init();
+ if (cfe_env) {
+ value = cfe_env_get(nvram_buf, name);
+ snprintf(val, val_len, "%s", value);
+ return 0;
+ }
+
/* Look for name=value and return value */
var = &nvram_buf[sizeof(struct nvram_header)];
end = nvram_buf + sizeof(nvram_buf) - 2;
@@ -194,6 +222,9 @@ char *nvram_get(const char *name)
if (!nvram_buf[0])
early_nvram_init();
+ if (cfe_env)
+ return cfe_env_get(nvram_buf, name);
+
/* Look for name=value and return value */
var = &nvram_buf[sizeof(struct nvram_header)];
end = nvram_buf + sizeof(nvram_buf) - 2;

View file

@ -1,104 +0,0 @@
--- a/drivers/watchdog/bcm47xx_wdt.c
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -31,6 +31,7 @@
#define WDT_DEFAULT_TIME 30 /* seconds */
#define WDT_MAX_TIME 255 /* seconds */
+#define WDT_SHIFT 15 /* 32.768 KHz on cores with slow WDT clock */
static int wdt_time = WDT_DEFAULT_TIME;
static int nowayout = WATCHDOG_NOWAYOUT;
@@ -50,20 +51,20 @@ static unsigned long bcm47xx_wdt_busy;
static char expect_release;
static struct timer_list wdt_timer;
static atomic_t ticks;
+static int needs_sw_scale;
-static inline void bcm47xx_wdt_hw_start(void)
+static inline void bcm47xx_wdt_hw_start(u32 ticks)
{
- /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, ticks);
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc,
- 0xfffffff);
+ ticks);
break;
#endif
}
@@ -88,33 +89,34 @@ static inline int bcm47xx_wdt_hw_stop(vo
static void bcm47xx_timer_tick(unsigned long unused)
{
if (!atomic_dec_and_test(&ticks)) {
- bcm47xx_wdt_hw_start();
+ /* This is 2,5s on 100Mhz clock and 2s on 133 Mhz */
+ bcm47xx_wdt_hw_start(0xfffffff);
mod_timer(&wdt_timer, jiffies + HZ);
} else {
- printk(KERN_CRIT DRV_NAME "Watchdog will fire soon!!!\n");
+ printk(KERN_CRIT DRV_NAME ": Watchdog will fire soon!!!\n");
}
}
-static inline void bcm47xx_wdt_pet(void)
+static void bcm47xx_wdt_pet(void)
{
- atomic_set(&ticks, wdt_time);
+ if(needs_sw_scale)
+ atomic_set(&ticks, wdt_time);
+ else
+ bcm47xx_wdt_hw_start(wdt_time << WDT_SHIFT);
}
static void bcm47xx_wdt_start(void)
{
bcm47xx_wdt_pet();
- bcm47xx_timer_tick(0);
-}
-
-static void bcm47xx_wdt_pause(void)
-{
- del_timer_sync(&wdt_timer);
- bcm47xx_wdt_hw_stop();
+ if(needs_sw_scale)
+ bcm47xx_timer_tick(0);
}
static void bcm47xx_wdt_stop(void)
{
- bcm47xx_wdt_pause();
+ if(needs_sw_scale)
+ del_timer_sync(&wdt_timer);
+ bcm47xx_wdt_hw_stop();
}
static int bcm47xx_wdt_settimeout(int new_time)
@@ -266,7 +268,20 @@ static int __init bcm47xx_wdt_init(void)
if (bcm47xx_wdt_hw_stop() < 0)
return -ENODEV;
- setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
+ /* FIXME Other cores */
+#ifdef BCM47XX_BUS_TYPE_BCMA
+ if(bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA &&
+ bcm47xx_bus.ssb.chip_id == 0x5354) {
+ /* Slow WDT clock, no pre-scaling */
+ needs_sw_scale = 0;
+ } else {
+#endif
+ /* Fast WDT clock, needs software pre-scaling */
+ needs_sw_scale = 1;
+ setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
+#ifdef BCM47XX_BUS_TYPE_BCMA
+ }
+#endif
if (bcm47xx_wdt_settimeout(wdt_time)) {
bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME);

View file

@ -1,138 +0,0 @@
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -20,10 +20,28 @@
#ifdef CONFIG_BCM47XX
#include <asm/paccess.h>
#include <linux/ssb/ssb.h>
-#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
+
+static inline unsigned long bcm4710_dummy_rreg(void)
+{
+ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
+}
+
+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
+
+static inline unsigned long bcm4710_fill_tlb(void *addr)
+{
+ return *(unsigned long *)addr;
+}
+
+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
+
+static inline void bcm4710_protected_fill_tlb(void *addr)
+{
+ unsigned long x;
+ get_dbe(x, (unsigned long *)addr);;
+}
-#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
-#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
#else
#define BCM4710_DUMMY_RREG()
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -914,6 +914,9 @@ build_get_pgde32(u32 **p, unsigned int t
#endif
uasm_i_addu(p, ptr, tmp, ptr);
#else
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
UASM_i_LA_mostly(p, ptr, pgdc);
#endif
uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
@@ -1264,12 +1267,12 @@ static void __cpuinit build_r4000_tlb_re
/* No need for uasm_i_nop */
}
-#ifdef CONFIG_BCM47XX
- uasm_i_nop(&p);
-#endif
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
+# ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+# endif
build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
#endif
@@ -1281,6 +1284,9 @@ static void __cpuinit build_r4000_tlb_re
build_update_entries(&p, K0, K1);
build_tlb_write_entry(&p, &l, &r, tlb_random);
uasm_l_leave(&l, p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+#endif
uasm_i_eret(&p); /* return from trap */
}
#ifdef CONFIG_HUGETLB_PAGE
@@ -1797,12 +1803,12 @@ build_r4000_tlbchange_handler_head(u32 *
{
struct work_registers wr = build_get_work_registers(p);
-#ifdef CONFIG_BCM47XX
- uasm_i_nop(p);
-#endif
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
#else
+# ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+# endif
build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
#endif
@@ -1841,6 +1847,9 @@ build_r4000_tlbchange_handler_tail(u32 *
build_tlb_write_entry(p, l, r, tlb_indexed);
uasm_l_leave(l, *p);
build_restore_work_registers(p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
uasm_i_eret(p); /* return from trap */
#ifdef CONFIG_64BIT
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -22,6 +22,19 @@
#include <asm/page.h>
#include <asm/thread_info.h>
+#ifdef CONFIG_BCM47XX
+# ifdef eret
+# undef eret
+# endif
+# define eret \
+ .set push; \
+ .set noreorder; \
+ nop; \
+ nop; \
+ eret; \
+ .set pop;
+#endif
+
#define PANIC_PIC(msg) \
.set push; \
.set reorder; \
@@ -54,7 +67,6 @@ NESTED(except_vec3_generic, 0, sp)
.set noat
#ifdef CONFIG_BCM47XX
nop
- nop
#endif
#if R5432_CP0_INTERRUPT_WAR
mfc0 k0, CP0_INDEX
@@ -79,6 +91,9 @@ NESTED(except_vec3_r4000, 0, sp)
.set push
.set mips3
.set noat
+#ifdef CONFIG_BCM47XX
+ nop
+#endif
mfc0 k1, CP0_CAUSE
li k0, 31<<2
andi k1, k1, 0x7c

View file

@ -1,46 +0,0 @@
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
* Probe for usable interrupts using the force
* register to generate bogus card status events.
*/
+#ifndef CONFIG_BCM47XX
+ /* WRT54G3G does not like this */
cb_writel(socket, CB_SOCKET_EVENT, -1);
cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
reg = exca_readb(socket, I365_CSCINT);
@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
}
cb_writel(socket, CB_SOCKET_MASK, 0);
exca_writeb(socket, I365_CSCINT, reg);
+#endif
mask = probe_irq_mask(val) & 0xffff;
@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
else
socket->socket.irq_mask = 0;
+ /* irq mask probing is broken for the WRT54G3G */
+ if (socket->socket.irq_mask == 0)
+ socket->socket.irq_mask = 0x6f8;
+
dev_printk(KERN_INFO, &socket->dev->dev,
"ISA IRQ mask 0x%04x, PCI irq %d\n",
socket->socket.irq_mask, socket->cb_irq);
@@ -1257,6 +1264,15 @@ static int __devinit yenta_probe(struct
dev_printk(KERN_INFO, &dev->dev,
"Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+ /* Generate an interrupt on card insert/remove */
+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
+
+ /* Set up Multifunction Routing Status Register */
+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
+
+ /* Switch interrupts to parallelized */
+ config_writeb(socket, 0x92, 0x64);
+
yenta_fixup_parent_bridge(dev->subordinate);
/* Register it with the pcmcia layer.. */

View file

@ -1,11 +0,0 @@
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -376,7 +376,7 @@ static void __devinit ssb_pcicore_init_h
set_io_port_base(ssb_pcicore_controller.io_map_base);
/* Give some time to the PCI controller to configure itself with the new
* values. Not waiting at this point causes crashes of the machine. */
- mdelay(10);
+ mdelay(300);
register_pci_controller(&ssb_pcicore_controller);
}

View file

@ -1,13 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -120,6 +120,10 @@ static int bcm47xx_get_invariants(struct
if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
+ /* Do not indicate cardbus for Netgear WNR834B V1 and V2 */
+ if (iv->boardinfo.type == 0x0472 && iv->has_cardbus_slot)
+ iv->has_cardbus_slot = 0;
+
return 0;
}

View file

@ -1,22 +0,0 @@
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -21,7 +21,8 @@
#include <asm/mach-bcm47xx/nvram.h>
#include <asm/mach-bcm47xx/bcm47xx.h>
-static char nvram_buf[NVRAM_SPACE];
+char nvram_buf[NVRAM_SPACE];
+EXPORT_SYMBOL(nvram_buf);
static int cfe_env;
extern char *cfe_env_get(char *nv_buf, const char *name);
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -58,6 +58,7 @@ void (*_dma_cache_wback)(unsigned long s
void (*_dma_cache_inv)(unsigned long start, unsigned long size);
EXPORT_SYMBOL(_dma_cache_wback_inv);
+EXPORT_SYMBOL(_dma_cache_inv);
#endif /* CONFIG_DMA_NONCOHERENT */