Revert "ramips: mt7621-spi: replace the driver with upstream staging one"
This reverts commit a44f000077
.
This breaks some mt7621 devices.
Signed-off-by: John Crispin <john@phrozen.org>
This commit is contained in:
parent
48a7a2a75d
commit
749a29f76c
1 changed files with 99 additions and 122 deletions
|
@ -5,8 +5,6 @@ Subject: [PATCH 43/53] spi: add mt7621 support
|
|||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d9e8610c85
|
||||
|
||||
drivers/spi/Kconfig | 6 +
|
||||
drivers/spi/Makefile | 1 +
|
||||
drivers/spi/spi-mt7621.c | 480 ++++++++++++++++++++++++++++++++++++++++++++++
|
||||
|
@ -40,7 +38,7 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
|
||||
--- /dev/null
|
||||
+++ b/drivers/spi/spi-mt7621.c
|
||||
@@ -0,0 +1,515 @@
|
||||
@@ -0,0 +1,494 @@
|
||||
+/*
|
||||
+ * spi-mt7621.c -- MediaTek MT7621 SPI controller driver
|
||||
+ *
|
||||
|
@ -98,8 +96,7 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+#define MT7621_CPOL BIT(4)
|
||||
+#define MT7621_LSB_FIRST BIT(3)
|
||||
+
|
||||
+#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | \
|
||||
+ SPI_LSB_FIRST | SPI_CS_HIGH)
|
||||
+#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH)
|
||||
+
|
||||
+struct mt7621_spi;
|
||||
+
|
||||
|
@ -109,7 +106,6 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+ unsigned int sys_freq;
|
||||
+ unsigned int speed;
|
||||
+ struct clk *clk;
|
||||
+ int pending_write;
|
||||
+
|
||||
+ struct mt7621_spi_ops *ops;
|
||||
+};
|
||||
|
@ -135,13 +131,14 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+
|
||||
+ master |= 7 << 29;
|
||||
+ master |= 1 << 2;
|
||||
+#ifdef CONFIG_SOC_MT7620
|
||||
+ if (duplex)
|
||||
+ master |= 1 << 10;
|
||||
+ else
|
||||
+#endif
|
||||
+ master &= ~(1 << 10);
|
||||
+
|
||||
+ mt7621_spi_write(rs, MT7621_SPI_MASTER, master);
|
||||
+ rs->pending_write = 0;
|
||||
+}
|
||||
+
|
||||
+static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
|
||||
|
@ -183,7 +180,7 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+ reg |= MT7621_LSB_FIRST;
|
||||
+
|
||||
+ reg &= ~(MT7621_CPHA | MT7621_CPOL);
|
||||
+ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
|
||||
+ switch(spi->mode & (SPI_CPOL | SPI_CPHA)) {
|
||||
+ case SPI_MODE_0:
|
||||
+ break;
|
||||
+ case SPI_MODE_1:
|
||||
|
@ -201,16 +198,18 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static inline int mt7621_spi_wait_till_ready(struct mt7621_spi *rs)
|
||||
+static inline int mt7621_spi_wait_till_ready(struct spi_device *spi)
|
||||
+{
|
||||
+ struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
|
||||
+ int i;
|
||||
+
|
||||
+ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
|
||||
+ u32 status;
|
||||
+
|
||||
+ status = mt7621_spi_read(rs, MT7621_SPI_TRANS);
|
||||
+ if ((status & SPITRANS_BUSY) == 0)
|
||||
+ if ((status & SPITRANS_BUSY) == 0) {
|
||||
+ return 0;
|
||||
+ }
|
||||
+ cpu_relax();
|
||||
+ udelay(1);
|
||||
+ }
|
||||
|
@ -218,92 +217,6 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+ return -ETIMEDOUT;
|
||||
+}
|
||||
+
|
||||
+static void mt7621_spi_read_half_duplex(struct mt7621_spi *rs,
|
||||
+ int rx_len, u8 *buf)
|
||||
+{
|
||||
+ /* Combine with any pending write, and perform one or
|
||||
+ * more half-duplex transactions reading 'len' bytes.
|
||||
+ * Data to be written is already in MT7621_SPI_DATA*
|
||||
+ */
|
||||
+ int tx_len = rs->pending_write;
|
||||
+
|
||||
+ rs->pending_write = 0;
|
||||
+
|
||||
+ while (rx_len || tx_len) {
|
||||
+ int i;
|
||||
+ u32 val = (min(tx_len, 4) * 8) << 24;
|
||||
+ int rx = min(rx_len, 32);
|
||||
+
|
||||
+ if (tx_len > 4)
|
||||
+ val |= (tx_len - 4) * 8;
|
||||
+ val |= (rx * 8) << 12;
|
||||
+ mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
|
||||
+
|
||||
+ tx_len = 0;
|
||||
+
|
||||
+ val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
|
||||
+ val |= SPI_CTL_START;
|
||||
+ mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
|
||||
+
|
||||
+ mt7621_spi_wait_till_ready(rs);
|
||||
+
|
||||
+ for (i = 0; i < rx; i++) {
|
||||
+ if ((i % 4) == 0)
|
||||
+ val = mt7621_spi_read(rs, MT7621_SPI_DATA0 + i);
|
||||
+ *buf++ = val & 0xff;
|
||||
+ val >>= 8;
|
||||
+ }
|
||||
+ rx_len -= i;
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+static inline void mt7621_spi_flush(struct mt7621_spi *rs)
|
||||
+{
|
||||
+ mt7621_spi_read_half_duplex(rs, 0, NULL);
|
||||
+}
|
||||
+
|
||||
+static void mt7621_spi_write_half_duplex(struct mt7621_spi *rs,
|
||||
+ int tx_len, const u8 *buf)
|
||||
+{
|
||||
+ int val = 0;
|
||||
+ int len = rs->pending_write;
|
||||
+
|
||||
+ if (len & 3) {
|
||||
+ val = mt7621_spi_read(rs, MT7621_SPI_OPCODE + (len & ~3));
|
||||
+ if (len < 4) {
|
||||
+ val <<= (4 - len) * 8;
|
||||
+ val = swab32(val);
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ while (tx_len > 0) {
|
||||
+ if (len >= 36) {
|
||||
+ rs->pending_write = len;
|
||||
+ mt7621_spi_flush(rs);
|
||||
+ len = 0;
|
||||
+ }
|
||||
+
|
||||
+ val |= *buf++ << (8 * (len & 3));
|
||||
+ len++;
|
||||
+ if ((len & 3) == 0) {
|
||||
+ if (len == 4)
|
||||
+ /* The byte-order of the opcode is weird! */
|
||||
+ val = swab32(val);
|
||||
+ mt7621_spi_write(rs, MT7621_SPI_OPCODE + len - 4, val);
|
||||
+ val = 0;
|
||||
+ }
|
||||
+ tx_len -= 1;
|
||||
+ }
|
||||
+ if (len & 3) {
|
||||
+ if (len < 4) {
|
||||
+ val = swab32(val);
|
||||
+ val >>= (4 - len) * 8;
|
||||
+ }
|
||||
+ mt7621_spi_write(rs, MT7621_SPI_OPCODE + (len & ~3), val);
|
||||
+ }
|
||||
+ rs->pending_write = len;
|
||||
+}
|
||||
+
|
||||
+static int mt7621_spi_transfer_half_duplex(struct spi_master *master,
|
||||
+ struct spi_message *m)
|
||||
+{
|
||||
|
@ -312,30 +225,84 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+ unsigned int speed = spi->max_speed_hz;
|
||||
+ struct spi_transfer *t = NULL;
|
||||
+ int status = 0;
|
||||
+ int i, len = 0;
|
||||
+ int rx_len = 0;
|
||||
+ u32 data[9] = { 0 };
|
||||
+ u32 val;
|
||||
+
|
||||
+ mt7621_spi_wait_till_ready(rs);
|
||||
+ mt7621_spi_wait_till_ready(spi);
|
||||
+
|
||||
+ list_for_each_entry(t, &m->transfers, transfer_list) {
|
||||
+ const u8 *buf = t->tx_buf;
|
||||
+
|
||||
+ if (t->rx_buf)
|
||||
+ rx_len += t->len;
|
||||
+
|
||||
+ if (!buf)
|
||||
+ continue;
|
||||
+
|
||||
+ list_for_each_entry(t, &m->transfers, transfer_list)
|
||||
+ if (t->speed_hz < speed)
|
||||
+ speed = t->speed_hz;
|
||||
+
|
||||
+ /*
|
||||
+ * m25p80 might attempt to write more data than we can handle.
|
||||
+ * truncate the message to what we can fit into the registers
|
||||
+ */
|
||||
+ if (len + t->len > 36)
|
||||
+ t->len = 36 - len;
|
||||
+
|
||||
+ for (i = 0; i < t->len; i++, len++)
|
||||
+ data[len / 4] |= buf[i] << (8 * (len & 3));
|
||||
+ }
|
||||
+
|
||||
+ if (WARN_ON(rx_len > 32)) {
|
||||
+ status = -EIO;
|
||||
+ goto msg_done;
|
||||
+ }
|
||||
+
|
||||
+ if (mt7621_spi_prepare(spi, speed)) {
|
||||
+ status = -EIO;
|
||||
+ goto msg_done;
|
||||
+ }
|
||||
+ data[0] = swab32(data[0]);
|
||||
+ if (len < 4)
|
||||
+ data[0] >>= (4 - len) * 8;
|
||||
+
|
||||
+ for (i = 0; i < len; i += 4)
|
||||
+ mt7621_spi_write(rs, MT7621_SPI_OPCODE + i, data[i / 4]);
|
||||
+
|
||||
+ val = (min_t(int, len, 4) * 8) << 24;
|
||||
+ if (len > 4)
|
||||
+ val |= (len - 4) * 8;
|
||||
+ val |= (rx_len * 8) << 12;
|
||||
+ mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
|
||||
+
|
||||
+ mt7621_spi_set_cs(spi, 1);
|
||||
+ m->actual_length = 0;
|
||||
+ list_for_each_entry(t, &m->transfers, transfer_list) {
|
||||
+ if (t->rx_buf)
|
||||
+ mt7621_spi_read_half_duplex(rs, t->len, t->rx_buf);
|
||||
+ else if (t->tx_buf)
|
||||
+ mt7621_spi_write_half_duplex(rs, t->len, t->tx_buf);
|
||||
+ m->actual_length += t->len;
|
||||
+ }
|
||||
+ mt7621_spi_flush(rs);
|
||||
+
|
||||
+ val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
|
||||
+ val |= SPI_CTL_START;
|
||||
+ mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
|
||||
+
|
||||
+ mt7621_spi_wait_till_ready(spi);
|
||||
+
|
||||
+ mt7621_spi_set_cs(spi, 0);
|
||||
+
|
||||
+ for (i = 0; i < rx_len; i += 4)
|
||||
+ data[i / 4] = mt7621_spi_read(rs, MT7621_SPI_DATA0 + i);
|
||||
+
|
||||
+ m->actual_length = len + rx_len;
|
||||
+
|
||||
+ len = 0;
|
||||
+ list_for_each_entry(t, &m->transfers, transfer_list) {
|
||||
+ u8 *buf = t->rx_buf;
|
||||
+
|
||||
+ if (!buf)
|
||||
+ continue;
|
||||
+
|
||||
+ for (i = 0; i < t->len; i++, len++)
|
||||
+ buf[i] = data[len / 4] >> (8 * (len & 3));
|
||||
+ }
|
||||
+
|
||||
+msg_done:
|
||||
+ m->status = status;
|
||||
+ spi_finalize_current_message(master);
|
||||
|
@ -343,6 +310,7 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+#ifdef CONFIG_SOC_MT7620
|
||||
+static int mt7621_spi_transfer_full_duplex(struct spi_master *master,
|
||||
+ struct spi_message *m)
|
||||
+{
|
||||
|
@ -356,7 +324,7 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+ u32 data[9] = { 0 };
|
||||
+ u32 val = 0;
|
||||
+
|
||||
+ mt7621_spi_wait_till_ready(rs);
|
||||
+ mt7621_spi_wait_till_ready(spi);
|
||||
+
|
||||
+ list_for_each_entry(t, &m->transfers, transfer_list) {
|
||||
+ const u8 *buf = t->tx_buf;
|
||||
|
@ -401,7 +369,7 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+ val |= SPI_CTL_START;
|
||||
+ mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
|
||||
+
|
||||
+ mt7621_spi_wait_till_ready(rs);
|
||||
+ mt7621_spi_wait_till_ready(spi);
|
||||
+
|
||||
+ mt7621_spi_set_cs(spi, 0);
|
||||
+
|
||||
|
@ -427,15 +395,18 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+#endif
|
||||
+
|
||||
+static int mt7621_spi_transfer_one_message(struct spi_master *master,
|
||||
+ struct spi_message *m)
|
||||
+{
|
||||
+ struct spi_device *spi = m->spi;
|
||||
+#ifdef CONFIG_SOC_MT7620
|
||||
+ int cs = spi->chip_select;
|
||||
+
|
||||
+ if (cs)
|
||||
+ return mt7621_spi_transfer_full_duplex(master, m);
|
||||
+#endif
|
||||
+ return mt7621_spi_transfer_half_duplex(master, m);
|
||||
+}
|
||||
+
|
||||
|
@ -462,6 +433,11 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+};
|
||||
+MODULE_DEVICE_TABLE(of, mt7621_spi_match);
|
||||
+
|
||||
+static size_t mt7621_max_transfer_size(struct spi_device *spi)
|
||||
+{
|
||||
+ return 32;
|
||||
+}
|
||||
+
|
||||
+static int mt7621_spi_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ const struct of_device_id *match;
|
||||
|
@ -507,6 +483,7 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
|
||||
+ master->dev.of_node = pdev->dev.of_node;
|
||||
+ master->num_chipselect = 2;
|
||||
+ master->max_transfer_size = mt7621_max_transfer_size;
|
||||
+
|
||||
+ dev_set_drvdata(&pdev->dev, master);
|
||||
+
|
||||
|
@ -516,7 +493,6 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+ rs->master = master;
|
||||
+ rs->sys_freq = clk_get_rate(rs->clk);
|
||||
+ rs->ops = ops;
|
||||
+ rs->pending_write = 0;
|
||||
+ dev_info(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
|
||||
+
|
||||
+ device_reset(&pdev->dev);
|
||||
|
@ -545,6 +521,7 @@ Note: This patch contains upstream mt7621-spi at 9c562d8411a54f6731cdc587c29968d
|
|||
+static struct platform_driver mt7621_spi_driver = {
|
||||
+ .driver = {
|
||||
+ .name = DRIVER_NAME,
|
||||
+ .owner = THIS_MODULE,
|
||||
+ .of_match_table = mt7621_spi_match,
|
||||
+ },
|
||||
+ .probe = mt7621_spi_probe,
|
||||
|
|
Loading…
Reference in a new issue