lantiq: Add support for the BT Home Hub 5A
u-boot support depends on the next "upstream" version ([0]) from Daniel Schwierzeck. Since the installation process is quite complicated a "how to" was added to the wiki: [1] [0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next [1] http://wiki.openwrt.org/toh/bt/homehub_v5a V2: Use the correct PCI interrupt (fixes 2.4GHz wifi) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 46223
This commit is contained in:
John Crispin
parent
2748df1c98
commit
6bdd209f15
7 changed files with 360 additions and 2 deletions
|
|
@ -0,0 +1,51 @@
|
|||
#!/bin/sh
|
||||
# Based on ar71xx 11-ath10k-caldata and 10-rt2x00-eeprom
|
||||
|
||||
ath10k_caldata_die() {
|
||||
echo "ath10k caldata: " "$*"
|
||||
exit 1
|
||||
}
|
||||
|
||||
ath10k_caldata_extract() {
|
||||
local part=$1
|
||||
local offset=$2
|
||||
local mtd
|
||||
|
||||
. /lib/functions.sh
|
||||
|
||||
mtd=$(find_mtd_part $part)
|
||||
[ -n "$mtd" ] || \
|
||||
ath10k_caldata_die "no mtd device found for partition $part"
|
||||
|
||||
dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=2116 || \
|
||||
ath10k_caldata_die "failed to extract from $mtd"
|
||||
}
|
||||
|
||||
ath10k_caldata_set_macaddr() {
|
||||
local macaddr=$1
|
||||
|
||||
macaddr_2bin $macaddr | dd of=/lib/firmware/$FIRMWARE \
|
||||
conv=notrunc bs=1 seek=6 count=6
|
||||
}
|
||||
|
||||
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/lantiq.sh
|
||||
|
||||
case "$FIRMWARE" in
|
||||
"ath10k/cal-pci-0000:02:00.0.bin")
|
||||
local board=$(lantiq_board_name)
|
||||
case $board in
|
||||
BTHOMEHUBV5A)
|
||||
local lan_mac=$(mtd_get_mac_binary caldata 4364)
|
||||
local wifi_mac=$(macaddr_add "$lan_mac" 3)
|
||||
ath10k_caldata_extract "caldata" 20480
|
||||
ath10k_caldata_set_macaddr $wifi_mac
|
||||
;;
|
||||
*)
|
||||
ath10k_caldata_die "board $board is not supported yet"
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
|
|
@ -25,7 +25,7 @@ BTHOMEHUBV2B)
|
|||
ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
|
||||
ucidef_set_led_usbdev "usb" "usb" "soc:blue:phone" "1-1"
|
||||
;;
|
||||
BTHOMEHUBV3A)
|
||||
BTHOMEHUBV3A|BTHOMEHUBV5A)
|
||||
ucidef_set_led_default "power" "power" "soc:blue:power" "1"
|
||||
ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
|
||||
ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
|
||||
|
|
|
|||
|
|
@ -169,6 +169,14 @@ BTHOMEHUBV2B|BTHOMEHUBV3A)
|
|||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
;;
|
||||
|
||||
BTHOMEHUBV5A)
|
||||
lan_mac=$(mtd_get_mac_binary caldata 4364)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_set_interface_lan 'eth0.1'
|
||||
ucidef_add_switch "switch0" "1" "1"
|
||||
ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 6t"
|
||||
;;
|
||||
|
||||
VGV7519)
|
||||
lan_mac=$(mtd_get_mac_binary board_config 22)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ platform_check_image() {
|
|||
local board=$(lantiq_board_name)
|
||||
|
||||
case "$board" in
|
||||
BTHOMEHUBV2B|BTHOMEHUBV3A|P2812HNUF* )
|
||||
BTHOMEHUBV2B|BTHOMEHUBV3A|BTHOMEHUBV5A|P2812HNUF* )
|
||||
nand_do_platform_check $board $1
|
||||
return $?;
|
||||
;;
|
||||
|
|
|
|||
287
target/linux/lantiq/dts/BTHOMEHUBV5A.dts
Normal file
287
target/linux/lantiq/dts/BTHOMEHUBV5A.dts
Normal file
|
|
@ -0,0 +1,287 @@
|
|||
/dts-v1/;
|
||||
|
||||
/include/ "vr9.dtsi"
|
||||
|
||||
/ {
|
||||
model = "BTHOMEHUBV5A - BT Home Hub 5A";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
reg = <0x0 0x8000000>;
|
||||
};
|
||||
|
||||
fpi@10000000 {
|
||||
localbus@0 {
|
||||
nand-parts@0 {
|
||||
compatible = "gen_nand", "lantiq,nand-xway";
|
||||
lantiq,cs = <1>;
|
||||
bank-width = <2>;
|
||||
reg = <0 0x0 0x2000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
partition@40000 {
|
||||
label = "uboot-env";
|
||||
reg = <0x40000 0x40000>;
|
||||
};
|
||||
caldata: partition@80000 {
|
||||
label = "caldata";
|
||||
reg = <0x80000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
partition@a0000 {
|
||||
label = "kernel";
|
||||
reg = <0xa0000 0x200000>;
|
||||
};
|
||||
partition@2a0000 {
|
||||
label = "ubi";
|
||||
reg = <0x2a0000 0x7d60000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio: pinmux@E100B10 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&state_default>;
|
||||
|
||||
interrupt-parent = <&icu0>;
|
||||
interrupts = <166 135 66 40 41 42 38>;
|
||||
|
||||
state_default: pinmux {
|
||||
mdio {
|
||||
lantiq,groups = "mdio";
|
||||
lantiq,function = "mdio";
|
||||
};
|
||||
pci_rst {
|
||||
lantiq,pins = "io21";
|
||||
lantiq,output = <1>;
|
||||
lantiq,open-drain;
|
||||
};
|
||||
pcie_rst {
|
||||
lantiq,pins = "io38";
|
||||
lantiq,pull = <0>;
|
||||
lantiq,output = <1>;
|
||||
lantiq,open-drain;
|
||||
};
|
||||
usb_vbus {
|
||||
lantiq,pins = "io33";
|
||||
lantiq,pull = <0>;
|
||||
lantiq,open-drain = <0>;
|
||||
lantiq,output = <1>;
|
||||
};
|
||||
nand_out {
|
||||
lantiq,groups = "nand cle", "nand ale";
|
||||
lantiq,function = "ebu";
|
||||
lantiq,output = <1>;
|
||||
lantiq,open-drain = <0>;
|
||||
lantiq,pull = <0>;
|
||||
};
|
||||
nand_cs1 {
|
||||
lantiq,groups = "nand cs1";
|
||||
lantiq,function = "ebu";
|
||||
lantiq,open-drain = <0>;
|
||||
lantiq,pull = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
eth@E108000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "lantiq,xrx200-net";
|
||||
reg = < 0xE108000 0x3000 /* switch */
|
||||
0xE10B100 0x70 /* mdio */
|
||||
0xE10B1D8 0x30 /* mii */
|
||||
0xE10B308 0x30 >; /* pmac */
|
||||
interrupt-parent = <&icu0>;
|
||||
interrupts = <73 72>;
|
||||
|
||||
lan: interface@0 {
|
||||
compatible = "lantiq,xrx200-pdi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
mtd-mac-address = <&caldata 0x110c>;
|
||||
lantiq,switch;
|
||||
|
||||
ethernet@0 {
|
||||
compatible = "lantiq,xrx200-pdi-port";
|
||||
reg = <0>;
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
ethernet@1 {
|
||||
compatible = "lantiq,xrx200-pdi-port";
|
||||
reg = <1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&phy1>;
|
||||
};
|
||||
ethernet@2 {
|
||||
compatible = "lantiq,xrx200-pdi-port";
|
||||
reg = <2>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&phy11>;
|
||||
};
|
||||
ethernet@4 {
|
||||
compatible = "lantiq,xrx200-pdi-port";
|
||||
reg = <4>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&phy13>;
|
||||
};
|
||||
};
|
||||
|
||||
wan: interface@1 {
|
||||
compatible = "lantiq,xrx200-pdi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
mtd-mac-address = <&caldata 0x110c>;
|
||||
mtd-mac-address-increment = <4>;
|
||||
lantiq,wan;
|
||||
|
||||
ethernet@5 {
|
||||
compatible = "lantiq,xrx200-pdi-port";
|
||||
reg = <5>;
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&phy5>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "lantiq,xrx200-mdio";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0x0>;
|
||||
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <0x1>;
|
||||
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
||||
};
|
||||
phy5: ethernet-phy@5 {
|
||||
reg = <0x5>;
|
||||
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
||||
};
|
||||
phy11: ethernet-phy@11 {
|
||||
reg = <0x11>;
|
||||
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
||||
};
|
||||
phy13: ethernet-phy@13 {
|
||||
reg = <0x13>;
|
||||
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ifxhcd@E101000 {
|
||||
status = "okay";
|
||||
gpios = <&gpio 33 0>;
|
||||
};
|
||||
|
||||
pci@E105400 {
|
||||
status = "okay";
|
||||
lantiq,bus-clock = <33333333>;
|
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
|
||||
gpio-reset = <&gpio 21 0>;
|
||||
};
|
||||
};
|
||||
|
||||
gphy-xrx200 {
|
||||
compatible = "lantiq,phy-xrx200";
|
||||
firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
|
||||
firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
|
||||
phys = [ 00 01 ];
|
||||
};
|
||||
|
||||
ath9k_eep {
|
||||
compatible = "ath9k,eeprom";
|
||||
ath,eep-flash = <&caldata 0x1000>;
|
||||
ath,mac-offset = <0x110c>;
|
||||
ath,mac-increment = <2>;
|
||||
ath,pci-slot = <0xe>; /* 14 */
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <100>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 2 1>;
|
||||
linux,code = <0x198>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 25 1>;
|
||||
linux,code = <0x211>;
|
||||
};
|
||||
|
||||
restart {
|
||||
label = "restart";
|
||||
gpios = <&gpio 39 1>;
|
||||
linux,code = <0x198>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
broadband-red {
|
||||
label = "soc:red:broadband";
|
||||
gpios = <&gpio 0 1>;
|
||||
};
|
||||
broadband-green {
|
||||
label = "soc:green:broadband";
|
||||
gpios = <&gpio 3 1>;
|
||||
};
|
||||
broadband-blue {
|
||||
label = "soc:blue:broadband";
|
||||
gpios = <&gpio 8 1>;
|
||||
};
|
||||
|
||||
wireless-red {
|
||||
label = "soc:red:wireless";
|
||||
gpios = <&gpio 9 1>;
|
||||
};
|
||||
wireless-green {
|
||||
label = "soc:green:wireless";
|
||||
gpios = <&gpio 10 1>;
|
||||
};
|
||||
wireless-blue {
|
||||
label = "soc:blue:wireless";
|
||||
gpios = <&gpio 11 1>;
|
||||
};
|
||||
|
||||
power-red {
|
||||
label = "soc:red:power";
|
||||
gpios = <&gpio 12 1>;
|
||||
};
|
||||
power-green {
|
||||
label = "soc:green:power";
|
||||
gpios = <&gpio 14 1>;
|
||||
};
|
||||
power-blue {
|
||||
label = "soc:blue:power";
|
||||
gpios = <&gpio 15 1>;
|
||||
};
|
||||
|
||||
dimmed {
|
||||
label = "dimmed";
|
||||
gpios = <&gpio 19 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -414,6 +414,9 @@ Image/Build/Profile/P2812HNUF3=$(call Image/BuildNAND/$(1),$(1),P2812HNUF3)
|
|||
Image/BuildKernel/Profile/ARV7519RW22=$(call Image/BuildKernel/Template,ARV7519RW22,$(1))
|
||||
Image/Build/Profile/ARV7519RW22=$(call Image/Build/$(1),$(1),ARV7519RW22)
|
||||
|
||||
Image/BuildKernel/Profile/BTHOMEHUBV5A=$(call Image/BuildKernel/Template,BTHOMEHUBV5A)
|
||||
Image/Build/Profile/BTHOMEHUBV5A=$(call Image/BuildNAND/$(1),$(1),BTHOMEHUBV5A)
|
||||
|
||||
Image/BuildKernel/Profile/EASY80920NAND=$(call Image/BuildKernel/Template,EASY80920NAND)
|
||||
Image/Build/Profile/EASY80920NAND=$(call Image/Build/$(1),$(1),EASY80920NAND)
|
||||
|
||||
|
|
|
|||
9
target/linux/lantiq/xrx200/profiles/bt.mk
Normal file
9
target/linux/lantiq/xrx200/profiles/bt.mk
Normal file
|
|
@ -0,0 +1,9 @@
|
|||
define Profile/BTHOMEHUBV5A
|
||||
NAME:=BT Home Hub 5A
|
||||
PACKAGES:=kmod-ath9k kmod-ath10k wpad-mini kmod-usb-dwc2
|
||||
endef
|
||||
|
||||
BTHOMEHUBV5A_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096"
|
||||
BTHOMEHUBV5A_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
|
||||
|
||||
$(eval $(call Profile,BTHOMEHUBV5A))
|
||||
Loading…
Reference in a new issue