ar71xx: add support for TL-WR1041N(v2) LAN/WAN LEDs.
1. Add support to LAN/WAN LEDs attached to ar8327. 2. Fix the problem that LAN/WAN LEDs does not blink in hardware (auto) mode when connected to 10M/100M ethernet. Signed-off-by: Kuang Rufan <master@a1983.com.cn>
This commit is contained in:
parent
05c3647d35
commit
69323a0c07
1 changed files with 20 additions and 1 deletions
|
@ -74,6 +74,22 @@ static struct gpio_keys_button tl_wr1041nv2_gpio_keys[] __initdata = {
|
|||
}
|
||||
};
|
||||
|
||||
static const struct ar8327_led_info tl_wr1041n_leds_ar8327[] = {
|
||||
AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:wan"),
|
||||
AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan1"),
|
||||
AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"),
|
||||
AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan3"),
|
||||
AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:lan4"),
|
||||
};
|
||||
|
||||
static struct ar8327_led_cfg wr1041n_v2_ar8327_led_cfg = {
|
||||
.led_ctrl0 = 0xcf35cf35, /* LED0: blink at 10/100/1000M */
|
||||
.led_ctrl1 = 0xcf35cf35, /* LED1: blink at 10/100/1000M: anyway, no LED1 on tl-wr1041n */
|
||||
.led_ctrl2 = 0xcf35cf35, /* LED2: blink at 10/100/1000M: anyway, no LED2 on tl-wr1041n */
|
||||
.led_ctrl3 = 0x03ffff00, /* Pattern enabled for LED 0-2 of port 1-3 */
|
||||
.open_drain = true,
|
||||
};
|
||||
|
||||
static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
|
||||
.mode = AR8327_PAD_MAC_RGMII,
|
||||
.txclk_delay_en = true,
|
||||
|
@ -90,7 +106,10 @@ static struct ar8327_platform_data db120_ar8327_data = {
|
|||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
}
|
||||
},
|
||||
.led_cfg = &wr1041n_v2_ar8327_led_cfg,
|
||||
.num_leds = ARRAY_SIZE(tl_wr1041n_leds_ar8327),
|
||||
.leds = tl_wr1041n_leds_ar8327
|
||||
};
|
||||
|
||||
static struct mdio_board_info db120_mdio0_info[] = {
|
||||
|
|
Loading…
Reference in a new issue