ramips: add suport for ZBT APE522II

The ZBT APE522II is a dual-radio outdoor CPE based on the MT7620a SoC. It has
64 MB RAM, 8 MB flash, 2 Fast Ethernet ports via internal switch (one with
802.3af 48V PoE support), a 802.11b/g/n SoC 2.4 GHz radio and an 802.11a/n/ac
MT7612E-based 5 GHz radio.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
This commit is contained in:
Roger Pueyo Centelles 2016-06-23 10:58:08 +02:00 committed by John Crispin
parent 27493e82f9
commit 5fba0f0c0c
6 changed files with 161 additions and 0 deletions

View file

@ -296,6 +296,11 @@ y1s)
set_usb_led "$board:blue:usb"
set_wifi_led "$board:blue:wifi"
;;
zbt-ape522ii)
ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$board:green:wlan2g4" "wlan1"
ucidef_set_led_netdev "sys1" "wlan1" "$board:green:sys1" "wlan1" "tx rx"
ucidef_set_led_netdev "sys2" "wlan0" "$board:green:sys2" "wlan0" "tx rx"
;;
zbt-wa05)
ucidef_set_led_default "power" "power" "$board:blue:power" "1"
set_wifi_led "$board:blue:air"

View file

@ -224,6 +224,7 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "0:wan" "6@eth0"
;;
zbt-ape522ii|\
zbt-we826|\
zbt-wr8305rt)
ucidef_add_switch "switch0" \

View file

@ -523,6 +523,9 @@ ramips_board_detect() {
*"Y1S")
name="y1s"
;;
*"ZBT-APE522II")
name="zbt-ape522ii"
;;
*"ZBT-WA05")
name="zbt-wa05"
;;

View file

@ -155,6 +155,7 @@ platform_check_image() {
x8|\
y1|\
y1s|\
zbt-ape522ii|\
zbt-wa05|\
zbt-we826|\
zbt-wg2626|\

View file

@ -0,0 +1,143 @@
/dts-v1/;
#include "mt7620a.dtsi"
/ {
compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc";
model = "ZBT-APE522II";
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
sys1 {
label = "zbt-ape522ii:green:sys1";
gpios = <&gpio0 11 1>;
};
sys2 {
label = "zbt-ape522ii:green:sys2";
gpios = <&gpio0 12 1>;
};
sys3 {
label = "zbt-ape522ii:green:sys3";
gpios = <&gpio0 9 1>;
};
sys4 {
label = "zbt-ape522ii:green:sys4";
gpios = <&gpio0 14 1>;
};
wlan2g4 {
label = "zbt-ape522ii:green:wlan2g4";
gpios = <&gpio3 0 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 2 0>;
linux,code = <0x198>;
};
};
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "w25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xf80000>;
};
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "wllll";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&pcie {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
mediatek,2ghz = <0>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wled", "i2c", "uartf", "wdt";
ralink,function = "gpio";
};
pa {
ralink,group = "pa";
ralink,function = "pa";
};
};
};

View file

@ -376,6 +376,14 @@ define Device/youku-yk1
endef
TARGET_DEVICES += youku-yk1
define Device/zbt-ape522ii
DTS := ZBT-APE522II
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_TITLE := Zbtlink ZBT-APE522II
DEVICE_PACKAGES := kmod-mt76
endef
TARGET_DEVICES += zbt-ape522ii
define Device/zbt-wa05
DTS := ZBT-WA05
IMAGE_SIZE := $(ralink_default_fw_size_8M)