diff --git a/target/linux/oxnas/config-4.4 b/target/linux/oxnas/config-4.4 index c281231867..f448cba72f 100644 --- a/target/linux/oxnas/config-4.4 +++ b/target/linux/oxnas/config-4.4 @@ -243,8 +243,7 @@ CONFIG_MODULES_USE_ELF_REL=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC=y CONFIG_MTD_NAND_OXNAS=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_MTD_SPLIT_FIRMWARE=y +# CONFIG_MTD_SPLIT_FIRMWARE is not set CONFIG_MTD_UBI=y CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_BLOCK=y diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts index 712c03e425..5f7c2a1e94 100644 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts @@ -34,15 +34,6 @@ nand@41000000 { status = "okay"; - partition@0 { - label = "boot"; - reg = <0x0 0x26c0000>; - }; - - partition@26c0000 { - label = "ubi"; - reg = <0x26c0000 0xd940000>; - }; }; ethernet@40400000 { @@ -132,3 +123,24 @@ }; }; }; + +&nandc { + status = "okay"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "hamming"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x026c0000>; + }; + + partition@26c0000 { + label = "ubi"; + reg = <0x026c0000 0x0d940000>; + }; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts index 1312fd63b5..a59addccac 100644 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts @@ -31,37 +31,6 @@ nr-ports = <2>; }; - nand@41000000 { - status = "okay"; - - partition@0 { - label = "stage1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "u-boot"; - reg = <0x00040000 0x00200000>; - read-only; - }; - - partition@240000 { - label = "initrd"; - reg = <0x00240000 0x00600000>; - }; - - partition@840000 { - label = "kernel"; - reg = <0x00840000 0x007C0000>; - }; - - partition@e00000 { - label = "ubi"; - reg = <0x01000000 0x07000000>; - }; - }; - ethernet@40400000 { status = "okay"; snps,phy-addr = <1>; @@ -163,3 +132,42 @@ gpios = <&GPIOA 9 0>; }; }; + +&nandc { + status = "okay"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "hamming"; + + partition@0 { + label = "stage1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "u-boot"; + reg = <0x00040000 0x00200000>; + read-only; + }; + + partition@240000 { + label = "initrd"; + reg = <0x00240000 0x00600000>; + }; + + partition@840000 { + label = "kernel"; + reg = <0x00840000 0x007C0000>; + }; + + partition@e00000 { + label = "ubi"; + reg = <0x01000000 0x07000000>; + }; + }; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts index f3730c32a6..5b087e93fa 100644 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts @@ -28,21 +28,6 @@ status = "okay"; }; - nand@41000000 { - status = "okay"; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x00e00000>; - /*read-only;*/ - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; - ethernet@40400000 { status = "okay"; }; @@ -84,3 +69,26 @@ }; }; }; + +&nandc { + status = "okay"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "hamming"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00e00000>; + /*read-only;*/ + }; + + partition@e00000 { + label = "ubi"; + reg = <0x00e00000 0x07200000>; + }; + }; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts index 802913273b..be0f6c9077 100644 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts @@ -25,21 +25,6 @@ status = "okay"; }; - nand@41000000 { - status = "okay"; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x00e00000>; - /*read-only;*/ - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; - ethernet@40400000 { status = "okay"; }; @@ -81,3 +66,26 @@ }; }; + +&nandc { + status = "okay"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "hamming"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00e00000>; + /*read-only;*/ + }; + + partition@e00000 { + label = "ubi"; + reg = <0x00e00000 0x07200000>; + }; + }; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts index a8112c947c..ad93d4ec15 100644 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts @@ -27,20 +27,6 @@ status = "okay"; }; - nand@41000000 { - status = "okay"; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x00e00000>; - /*read-only;*/ - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; ethernet@40400000 { status = "okay"; @@ -91,3 +77,26 @@ }; }; + +&nandc { + status = "okay"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "hamming"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00e00000>; + read-only; + }; + + partition@e00000 { + label = "ubi"; + reg = <0x00e00000 0x07200000>; + }; + }; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi b/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi index 4ba4b8b086..c096a7d1c3 100644 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi @@ -298,16 +298,15 @@ status = "disabled"; }; - nand@41000000 { - compatible = "plxtech,nand-nas782x", "gen_nand"; - reg = <0x41000000 0x100000>, <0x41C00000 0x20>; - nand-ecc-mode = "soft"; + nandc: nand-controller@41000000 { + compatible = "oxsemi,ox820-nand"; + reg = <0x41000000 0x100000>; clocks = <&stdclk 9>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand0>; resets = <&rst 15>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; status = "disabled"; }; diff --git a/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c b/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c index 9536e5179c..6cb17cd70e 100644 --- a/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c +++ b/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c @@ -1,94 +1,211 @@ /* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. + * Oxford Semiconductor OXNAS NAND driver + + * Copyright (C) 2016 Neil Armstrong + * Heavily based on plat_nand.c : + * Author: Vitaly Wool + * Copyright (C) 2013 Ma Haijun + * Copyright (C) 2012 John Crispin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. * - * based on xway_nand.c - * Copyright © 2012 John Crispin - * and oxnas_nand.c "NAND glue for Oxnas platforms" - * written by Ma Haijun */ -#include -#include -#include +#include +#include +#include +#include +#include #include #include +#include +#include +#include +#include -/* nand commands */ -#define NAND_CMD_ALE BIT(18) -#define NAND_CMD_CLE BIT(19) -#define NAND_CMD_CS 0 -#define NAND_CMD_RESET 0xff -#define NAND_CMD (NAND_CMD_CS | NAND_CMD_CLE) -#define NAND_ADDR (NAND_CMD_CS | NAND_CMD_ALE) -#define NAND_DATA (NAND_CMD_CS) +/* Nand commands */ +#define OXNAS_NAND_CMD_ALE BIT(18) +#define OXNAS_NAND_CMD_CLE BIT(19) -static void oxnas_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +#define OXNAS_NAND_MAX_CHIPS 1 + +struct oxnas_nand { + struct nand_hw_control base; + void __iomem *io_base; + struct clk *clk; + struct nand_chip *chips[OXNAS_NAND_MAX_CHIPS]; + unsigned long ctrl; + struct mtd_partition *partitions; + int nr_partitions; +}; + +static uint8_t oxnas_nand_read_byte(struct mtd_info *mtd) { - struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; + struct nand_chip *chip = mtd_to_nand(mtd); + struct oxnas_nand *oxnas = nand_get_controller_data(chip); + + return readb(oxnas->io_base); +} + +static void oxnas_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct oxnas_nand *oxnas = nand_get_controller_data(chip); + + ioread8_rep(oxnas->io_base, buf, len); +} + +static void oxnas_nand_write_buf(struct mtd_info *mtd, + const uint8_t *buf, int len) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct oxnas_nand *oxnas = nand_get_controller_data(chip); + + iowrite8_rep(oxnas->io_base + oxnas->ctrl, buf, len); +} + +/* Single CS command control */ +static void oxnas_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct oxnas_nand *oxnas = nand_get_controller_data(chip); if (ctrl & NAND_CTRL_CHANGE) { - nandaddr &= ~(NAND_CMD | NAND_ADDR); if (ctrl & NAND_CLE) - nandaddr |= NAND_CMD; + oxnas->ctrl = OXNAS_NAND_CMD_CLE; else if (ctrl & NAND_ALE) - nandaddr |= NAND_ADDR; - this->IO_ADDR_W = (void __iomem *) nandaddr; + oxnas->ctrl = OXNAS_NAND_CMD_ALE; + else + oxnas->ctrl = 0; } if (cmd != NAND_CMD_NONE) - writeb(cmd, (void __iomem *) nandaddr); + writeb(cmd, oxnas->io_base + oxnas->ctrl); } -static int oxnas_nand_probe(struct platform_device *pdev) -{ - /* enable clock and release static block reset */ - struct clk *clk = of_clk_get(pdev->dev.of_node, 0); - - if (IS_ERR(clk)) - return PTR_ERR(clk); - - clk_prepare_enable(clk); - device_reset(&pdev->dev); - - return 0; -} - -/* allow users to override the partition in DT using the cmdline */ -static const char * part_probes[] = { "cmdlinepart", "ofpart", NULL }; - -static struct platform_nand_data oxnas_nand_data = { - .chip = { - .nr_chips = 1, - .chip_delay = 30, - .part_probe_types = part_probes, - }, - .ctrl = { - .probe = oxnas_nand_probe, - .cmd_ctrl = oxnas_cmd_ctrl, - } -}; - /* - * Try to find the node inside the DT. If it is available attach out - * platform_nand_data + * Probe for the NAND device. */ -static int __init oxnas_register_nand(void) +static int oxnas_nand_probe(struct platform_device *pdev) { - struct device_node *node; - struct platform_device *pdev; + struct device_node *np = pdev->dev.of_node; + struct device_node *nand_np; + struct oxnas_nand *oxnas; + struct nand_chip *chip; + struct mtd_info *mtd; + struct resource *res; + int nchips = 0; + int count = 0; + int err = 0; - node = of_find_compatible_node(NULL, NULL, "plxtech,nand-nas782x"); - if (!node) - return -ENOENT; - pdev = of_find_device_by_node(node); - if (!pdev) + /* Allocate memory for the device structure (and zero it) */ + oxnas = devm_kzalloc(&pdev->dev, sizeof(struct nand_chip), + GFP_KERNEL); + if (!oxnas) + return -ENOMEM; + + nand_hw_control_init(&oxnas->base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + oxnas->io_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(oxnas->io_base)) + return PTR_ERR(oxnas->io_base); + + oxnas->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(oxnas->clk)) + oxnas->clk = NULL; + + /* Only a single chip node is supported */ + count = of_get_child_count(np); + pr_info("########### count: %d\n", count); + if (count > 1) return -EINVAL; - pdev->dev.platform_data = &oxnas_nand_data; - of_node_put(node); + + clk_prepare_enable(oxnas->clk); + device_reset_optional(&pdev->dev); + + for_each_child_of_node(np, nand_np) { + chip = devm_kzalloc(&pdev->dev, sizeof(struct nand_chip), + GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->controller = &oxnas->base; + + nand_set_flash_node(chip, nand_np); + nand_set_controller_data(chip, oxnas); + + mtd = nand_to_mtd(chip); + mtd->dev.parent = &pdev->dev; + mtd->priv = chip; + + chip->cmd_ctrl = oxnas_nand_cmd_ctrl; + chip->read_buf = oxnas_nand_read_buf; + chip->read_byte = oxnas_nand_read_byte; + chip->write_buf = oxnas_nand_write_buf; + chip->chip_delay = 30; + + /* Scan to find existence of the device */ + err = nand_scan(mtd, 1); + pr_info("########### nand_scan err: %d\n", err); + if (err) + return err; + + err = mtd_device_register(mtd, NULL, 0); + pr_info("########### mtd_device_register err: %d\n", err); + if (err) { + nand_release(mtd); + return err; + } + + oxnas->chips[nchips] = chip; + ++nchips; + } + + pr_info("########### nchips: %d\n", nchips); + + /* Exit if no chips found */ + if (!nchips) + return -ENODEV; + + platform_set_drvdata(pdev, oxnas); + return 0; } -subsys_initcall(oxnas_register_nand); +static int oxnas_nand_remove(struct platform_device *pdev) +{ + struct oxnas_nand *oxnas = platform_get_drvdata(pdev); + + if (oxnas->chips[0]) + nand_release(nand_to_mtd(oxnas->chips[0])); + + clk_disable_unprepare(oxnas->clk); + + return 0; +} + +static const struct of_device_id oxnas_nand_match[] = { + { .compatible = "oxsemi,ox820-nand" }, + {}, +}; +MODULE_DEVICE_TABLE(of, oxnas_nand_match); + +static struct platform_driver oxnas_nand_driver = { + .probe = oxnas_nand_probe, + .remove = oxnas_nand_remove, + .driver = { + .name = "oxnas_nand", + .of_match_table = oxnas_nand_match, + }, +}; + +module_platform_driver(oxnas_nand_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Neil Armstrong "); +MODULE_DESCRIPTION("Oxnas NAND driver"); +MODULE_ALIAS("platform:oxnas_nand"); diff --git a/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch b/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch new file mode 100644 index 0000000000..2fbbd774c9 --- /dev/null +++ b/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch @@ -0,0 +1,5300 @@ +From a369af5149e6eb442b22ce89b564dd7a76e03638 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 26 Apr 2016 19:05:01 +0200 +Subject: [PATCH 072/102] mtd: backport v4.7-0day patches from Boris + +Signed-off-by: John Crispin +--- + drivers/mtd/Kconfig | 4 +- + drivers/mtd/cmdlinepart.c | 3 +- + drivers/mtd/devices/m25p80.c | 44 +-- + drivers/mtd/maps/physmap_of.c | 6 +- + drivers/mtd/mtdchar.c | 123 ++++++-- + drivers/mtd/mtdconcat.c | 2 +- + drivers/mtd/mtdcore.c | 428 ++++++++++++++++++++++++-- + drivers/mtd/mtdcore.h | 7 +- + drivers/mtd/mtdpart.c | 161 ++++++---- + drivers/mtd/mtdswap.c | 24 +- + drivers/mtd/nand/Kconfig | 21 +- + drivers/mtd/nand/Makefile | 2 + + drivers/mtd/nand/nand_base.c | 571 +++++++++++++++++++---------------- + drivers/mtd/nand/nand_bbt.c | 34 +-- + drivers/mtd/nand/nand_bch.c | 52 ++-- + drivers/mtd/nand/nand_ecc.c | 6 +- + drivers/mtd/nand/nand_ids.c | 4 +- + drivers/mtd/nand/nandsim.c | 43 +-- + drivers/mtd/ofpart.c | 53 ++-- + drivers/mtd/spi-nor/Kconfig | 10 +- + drivers/mtd/spi-nor/Makefile | 1 + + drivers/mtd/spi-nor/mtk-quadspi.c | 485 +++++++++++++++++++++++++++++ + drivers/mtd/spi-nor/spi-nor.c | 321 +++++++++++++------- + drivers/mtd/tests/mtd_nandecctest.c | 2 +- + drivers/mtd/tests/oobtest.c | 49 ++- + drivers/mtd/tests/pagetest.c | 3 +- + include/linux/mtd/bbm.h | 1 - + include/linux/mtd/fsmc.h | 18 -- + include/linux/mtd/inftl.h | 1 - + include/linux/mtd/map.h | 9 +- + include/linux/mtd/mtd.h | 80 ++++- + include/linux/mtd/nand.h | 94 ++++-- + include/linux/mtd/nand_bch.h | 10 +- + include/linux/mtd/nftl.h | 1 - + include/linux/mtd/onenand.h | 2 - + include/linux/mtd/partitions.h | 27 +- + include/linux/mtd/sh_flctl.h | 4 +- + include/linux/mtd/sharpsl.h | 2 +- + include/linux/mtd/spi-nor.h | 23 +- + include/uapi/mtd/mtd-abi.h | 2 +- + 45 files changed, 2077 insertions(+), 748 deletions(-) + create mode 100644 drivers/mtd/spi-nor/mtk-quadspi.c + +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -131,7 +131,7 @@ config MTD_CMDLINE_PARTS + + config MTD_AFS_PARTS + tristate "ARM Firmware Suite partition parsing" +- depends on ARM ++ depends on (ARM || ARM64) + ---help--- + The ARM Firmware Suite allows the user to divide flash devices into + multiple 'images'. Each such image has a header containing its name +@@ -161,7 +161,7 @@ config MTD_AR7_PARTS + + config MTD_BCM63XX_PARTS + tristate "BCM63XX CFE partitioning support" +- depends on BCM63XX ++ depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST + select CRC32 + help + This provides partions parsing for BCM63xx devices with CFE +--- a/drivers/mtd/cmdlinepart.c ++++ b/drivers/mtd/cmdlinepart.c +@@ -304,7 +304,7 @@ static int mtdpart_setup_real(char *s) + * the first one in the chain if a NULL mtd_id is passed in. + */ + static int parse_cmdline_partitions(struct mtd_info *master, +- struct mtd_partition **pparts, ++ const struct mtd_partition **pparts, + struct mtd_part_parser_data *data) + { + unsigned long long offset; +@@ -382,7 +382,6 @@ static int __init mtdpart_setup(char *s) + __setup("mtdparts=", mtdpart_setup); + + static struct mtd_part_parser cmdline_parser = { +- .owner = THIS_MODULE, + .parse_fn = parse_cmdline_partitions, + .name = "cmdlinepart", + }; +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -174,22 +174,6 @@ static int m25p80_read(struct spi_nor *n + return 0; + } + +-static int m25p80_erase(struct spi_nor *nor, loff_t offset) +-{ +- struct m25p *flash = nor->priv; +- +- dev_dbg(nor->dev, "%dKiB at 0x%08x\n", +- flash->spi_nor.mtd.erasesize / 1024, (u32)offset); +- +- /* Set up command buffer. */ +- flash->command[0] = nor->erase_opcode; +- m25p_addr2cmd(nor, offset, flash->command); +- +- spi_write(flash->spi, flash->command, m25p_cmdsz(nor)); +- +- return 0; +-} +- + /* + * board specific setup should have ensured the SPI clock used here + * matches what the READ command supports, at least until this driver +@@ -197,12 +181,11 @@ static int m25p80_erase(struct spi_nor * + */ + static int m25p_probe(struct spi_device *spi) + { +- struct mtd_part_parser_data ppdata; + struct flash_platform_data *data; + struct m25p *flash; + struct spi_nor *nor; + enum read_mode mode = SPI_NOR_NORMAL; +- char *flash_name = NULL; ++ char *flash_name; + int ret; + + data = dev_get_platdata(&spi->dev); +@@ -216,12 +199,11 @@ static int m25p_probe(struct spi_device + /* install the hooks */ + nor->read = m25p80_read; + nor->write = m25p80_write; +- nor->erase = m25p80_erase; + nor->write_reg = m25p80_write_reg; + nor->read_reg = m25p80_read_reg; + + nor->dev = &spi->dev; +- nor->flash_node = spi->dev.of_node; ++ spi_nor_set_flash_node(nor, spi->dev.of_node); + nor->priv = flash; + + spi_set_drvdata(spi, flash); +@@ -242,6 +224,8 @@ static int m25p_probe(struct spi_device + */ + if (data && data->type) + flash_name = data->type; ++ else if (!strcmp(spi->modalias, "spi-nor")) ++ flash_name = NULL; /* auto-detect */ + else + flash_name = spi->modalias; + +@@ -249,11 +233,8 @@ static int m25p_probe(struct spi_device + if (ret) + return ret; + +- ppdata.of_node = spi->dev.of_node; +- +- return mtd_device_parse_register(&nor->mtd, NULL, &ppdata, +- data ? data->parts : NULL, +- data ? data->nr_parts : 0); ++ return mtd_device_register(&nor->mtd, data ? data->parts : NULL, ++ data ? data->nr_parts : 0); + } + + +@@ -279,14 +260,21 @@ static int m25p_remove(struct spi_device + */ + static const struct spi_device_id m25p_ids[] = { + /* ++ * Allow non-DT platform devices to bind to the "spi-nor" modalias, and ++ * hack around the fact that the SPI core does not provide uevent ++ * matching for .of_match_table ++ */ ++ {"spi-nor"}, ++ ++ /* + * Entries not used in DTs that should be safe to drop after replacing +- * them with "nor-jedec" in platform data. ++ * them with "spi-nor" in platform data. + */ + {"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"}, + + /* +- * Entries that were used in DTs without "nor-jedec" fallback and should +- * be kept for backward compatibility. ++ * Entries that were used in DTs without "jedec,spi-nor" fallback and ++ * should be kept for backward compatibility. + */ + {"at25df321a"}, {"at25df641"}, {"at26df081a"}, + {"mr25h256"}, +--- a/drivers/mtd/maps/physmap_of.c ++++ b/drivers/mtd/maps/physmap_of.c +@@ -128,7 +128,6 @@ static int of_flash_probe(struct platfor + int reg_tuple_size; + struct mtd_info **mtd_list = NULL; + resource_size_t res_size; +- struct mtd_part_parser_data ppdata; + bool map_indirect; + const char *mtd_name = NULL; + +@@ -272,8 +271,9 @@ static int of_flash_probe(struct platfor + if (err) + goto err_out; + +- ppdata.of_node = dp; +- mtd_device_parse_register(info->cmtd, part_probe_types_def, &ppdata, ++ info->cmtd->dev.parent = &dev->dev; ++ mtd_set_of_node(info->cmtd, dp); ++ mtd_device_parse_register(info->cmtd, part_probe_types_def, NULL, + NULL, 0); + + kfree(mtd_list); +--- a/drivers/mtd/mtdchar.c ++++ b/drivers/mtd/mtdchar.c +@@ -465,38 +465,111 @@ static int mtdchar_readoob(struct file * + } + + /* +- * Copies (and truncates, if necessary) data from the larger struct, +- * nand_ecclayout, to the smaller, deprecated layout struct, +- * nand_ecclayout_user. This is necessary only to support the deprecated +- * API ioctl ECCGETLAYOUT while allowing all new functionality to use +- * nand_ecclayout flexibly (i.e. the struct may change size in new +- * releases without requiring major rewrites). ++ * Copies (and truncates, if necessary) OOB layout information to the ++ * deprecated layout struct, nand_ecclayout_user. This is necessary only to ++ * support the deprecated API ioctl ECCGETLAYOUT while allowing all new ++ * functionality to use mtd_ooblayout_ops flexibly (i.e. mtd_ooblayout_ops ++ * can describe any kind of OOB layout with almost zero overhead from a ++ * memory usage point of view). + */ +-static int shrink_ecclayout(const struct nand_ecclayout *from, +- struct nand_ecclayout_user *to) ++static int shrink_ecclayout(struct mtd_info *mtd, ++ struct nand_ecclayout_user *to) + { +- int i; ++ struct mtd_oob_region oobregion; ++ int i, section = 0, ret; + +- if (!from || !to) ++ if (!mtd || !to) + return -EINVAL; + + memset(to, 0, sizeof(*to)); + +- to->eccbytes = min((int)from->eccbytes, MTD_MAX_ECCPOS_ENTRIES); +- for (i = 0; i < to->eccbytes; i++) +- to->eccpos[i] = from->eccpos[i]; ++ to->eccbytes = 0; ++ for (i = 0; i < MTD_MAX_ECCPOS_ENTRIES;) { ++ u32 eccpos; ++ ++ ret = mtd_ooblayout_ecc(mtd, section, &oobregion); ++ if (ret < 0) { ++ if (ret != -ERANGE) ++ return ret; ++ ++ break; ++ } ++ ++ eccpos = oobregion.offset; ++ for (; i < MTD_MAX_ECCPOS_ENTRIES && ++ eccpos < oobregion.offset + oobregion.length; i++) { ++ to->eccpos[i] = eccpos++; ++ to->eccbytes++; ++ } ++ } + + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES; i++) { +- if (from->oobfree[i].length == 0 && +- from->oobfree[i].offset == 0) ++ ret = mtd_ooblayout_free(mtd, i, &oobregion); ++ if (ret < 0) { ++ if (ret != -ERANGE) ++ return ret; ++ + break; +- to->oobavail += from->oobfree[i].length; +- to->oobfree[i] = from->oobfree[i]; ++ } ++ ++ to->oobfree[i].offset = oobregion.offset; ++ to->oobfree[i].length = oobregion.length; ++ to->oobavail += to->oobfree[i].length; + } + + return 0; + } + ++static int get_oobinfo(struct mtd_info *mtd, struct nand_oobinfo *to) ++{ ++ struct mtd_oob_region oobregion; ++ int i, section = 0, ret; ++ ++ if (!mtd || !to) ++ return -EINVAL; ++ ++ memset(to, 0, sizeof(*to)); ++ ++ to->eccbytes = 0; ++ for (i = 0; i < ARRAY_SIZE(to->eccpos);) { ++ u32 eccpos; ++ ++ ret = mtd_ooblayout_ecc(mtd, section, &oobregion); ++ if (ret < 0) { ++ if (ret != -ERANGE) ++ return ret; ++ ++ break; ++ } ++ ++ if (oobregion.length + i > ARRAY_SIZE(to->eccpos)) ++ return -EINVAL; ++ ++ eccpos = oobregion.offset; ++ for (; eccpos < oobregion.offset + oobregion.length; i++) { ++ to->eccpos[i] = eccpos++; ++ to->eccbytes++; ++ } ++ } ++ ++ for (i = 0; i < 8; i++) { ++ ret = mtd_ooblayout_free(mtd, i, &oobregion); ++ if (ret < 0) { ++ if (ret != -ERANGE) ++ return ret; ++ ++ break; ++ } ++ ++ to->oobfree[i][0] = oobregion.offset; ++ to->oobfree[i][1] = oobregion.length; ++ } ++ ++ to->useecc = MTD_NANDECC_AUTOPLACE; ++ ++ return 0; ++} ++ + static int mtdchar_blkpg_ioctl(struct mtd_info *mtd, + struct blkpg_ioctl_arg *arg) + { +@@ -815,16 +888,12 @@ static int mtdchar_ioctl(struct file *fi + { + struct nand_oobinfo oi; + +- if (!mtd->ecclayout) ++ if (!mtd->ooblayout) + return -EOPNOTSUPP; +- if (mtd->ecclayout->eccbytes > ARRAY_SIZE(oi.eccpos)) +- return -EINVAL; + +- oi.useecc = MTD_NANDECC_AUTOPLACE; +- memcpy(&oi.eccpos, mtd->ecclayout->eccpos, sizeof(oi.eccpos)); +- memcpy(&oi.oobfree, mtd->ecclayout->oobfree, +- sizeof(oi.oobfree)); +- oi.eccbytes = mtd->ecclayout->eccbytes; ++ ret = get_oobinfo(mtd, &oi); ++ if (ret) ++ return ret; + + if (copy_to_user(argp, &oi, sizeof(struct nand_oobinfo))) + return -EFAULT; +@@ -913,14 +982,14 @@ static int mtdchar_ioctl(struct file *fi + { + struct nand_ecclayout_user *usrlay; + +- if (!mtd->ecclayout) ++ if (!mtd->ooblayout) + return -EOPNOTSUPP; + + usrlay = kmalloc(sizeof(*usrlay), GFP_KERNEL); + if (!usrlay) + return -ENOMEM; + +- shrink_ecclayout(mtd->ecclayout, usrlay); ++ shrink_ecclayout(mtd, usrlay); + + if (copy_to_user(argp, usrlay, sizeof(*usrlay))) + ret = -EFAULT; +--- a/drivers/mtd/mtdconcat.c ++++ b/drivers/mtd/mtdconcat.c +@@ -777,7 +777,7 @@ struct mtd_info *mtd_concat_create(struc + + } + +- concat->mtd.ecclayout = subdev[0]->ecclayout; ++ mtd_set_ooblayout(&concat->mtd, subdev[0]->ooblayout); + + concat->num_subdev = num_devs; + concat->mtd.name = name; +--- a/drivers/mtd/mtdcore.c ++++ b/drivers/mtd/mtdcore.c +@@ -32,6 +32,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -446,6 +447,7 @@ int add_mtd_device(struct mtd_info *mtd) + mtd->dev.devt = MTD_DEVT(i); + dev_set_name(&mtd->dev, "mtd%d", i); + dev_set_drvdata(&mtd->dev, mtd); ++ of_node_get(mtd_get_of_node(mtd)); + error = device_register(&mtd->dev); + if (error) + goto fail_added; +@@ -477,6 +479,7 @@ int add_mtd_device(struct mtd_info *mtd) + return 0; + + fail_added: ++ of_node_put(mtd_get_of_node(mtd)); + idr_remove(&mtd_idr, i); + fail_locked: + mutex_unlock(&mtd_table_mutex); +@@ -518,6 +521,7 @@ int del_mtd_device(struct mtd_info *mtd) + device_unregister(&mtd->dev); + + idr_remove(&mtd_idr, mtd->index); ++ of_node_put(mtd_get_of_node(mtd)); + + module_put(THIS_MODULE); + ret = 0; +@@ -529,9 +533,10 @@ out_error: + } + + static int mtd_add_device_partitions(struct mtd_info *mtd, +- struct mtd_partition *real_parts, +- int nbparts) ++ struct mtd_partitions *parts) + { ++ const struct mtd_partition *real_parts = parts->parts; ++ int nbparts = parts->nr_parts; + int ret; + + if (nbparts == 0 || IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER)) { +@@ -600,29 +605,29 @@ int mtd_device_parse_register(struct mtd + const struct mtd_partition *parts, + int nr_parts) + { ++ struct mtd_partitions parsed; + int ret; +- struct mtd_partition *real_parts = NULL; + + mtd_set_dev_defaults(mtd); + +- ret = parse_mtd_partitions(mtd, types, &real_parts, parser_data); +- if (ret <= 0 && nr_parts && parts) { +- real_parts = kmemdup(parts, sizeof(*parts) * nr_parts, +- GFP_KERNEL); +- if (!real_parts) +- ret = -ENOMEM; +- else +- ret = nr_parts; +- } +- /* Didn't come up with either parsed OR fallback partitions */ +- if (ret < 0) { +- pr_info("mtd: failed to find partitions; one or more parsers reports errors (%d)\n", ++ memset(&parsed, 0, sizeof(parsed)); ++ ++ ret = parse_mtd_partitions(mtd, types, &parsed, parser_data); ++ if ((ret < 0 || parsed.nr_parts == 0) && parts && nr_parts) { ++ /* Fall back to driver-provided partitions */ ++ parsed = (struct mtd_partitions){ ++ .parts = parts, ++ .nr_parts = nr_parts, ++ }; ++ } else if (ret < 0) { ++ /* Didn't come up with parsed OR fallback partitions */ ++ pr_info("mtd: failed to find partitions; one or more parsers reports errors (%d)\n", + ret); + /* Don't abort on errors; we can still use unpartitioned MTD */ +- ret = 0; ++ memset(&parsed, 0, sizeof(parsed)); + } + +- ret = mtd_add_device_partitions(mtd, real_parts, ret); ++ ret = mtd_add_device_partitions(mtd, &parsed); + if (ret) + goto out; + +@@ -642,7 +647,8 @@ int mtd_device_parse_register(struct mtd + } + + out: +- kfree(real_parts); ++ /* Cleanup any parsed partitions */ ++ mtd_part_parser_cleanup(&parsed); + return ret; + } + EXPORT_SYMBOL_GPL(mtd_device_parse_register); +@@ -767,7 +773,6 @@ out: + } + EXPORT_SYMBOL_GPL(get_mtd_device); + +- + int __get_mtd_device(struct mtd_info *mtd) + { + int err; +@@ -1001,6 +1006,366 @@ int mtd_read_oob(struct mtd_info *mtd, l + } + EXPORT_SYMBOL_GPL(mtd_read_oob); + ++/** ++ * mtd_ooblayout_ecc - Get the OOB region definition of a specific ECC section ++ * @mtd: MTD device structure ++ * @section: ECC section. Depending on the layout you may have all the ECC ++ * bytes stored in a single contiguous section, or one section ++ * per ECC chunk (and sometime several sections for a single ECC ++ * ECC chunk) ++ * @oobecc: OOB region struct filled with the appropriate ECC position ++ * information ++ * ++ * This functions return ECC section information in the OOB area. I you want ++ * to get all the ECC bytes information, then you should call ++ * mtd_ooblayout_ecc(mtd, section++, oobecc) until it returns -ERANGE. ++ * ++ * Returns zero on success, a negative error code otherwise. ++ */ ++int mtd_ooblayout_ecc(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oobecc) ++{ ++ memset(oobecc, 0, sizeof(*oobecc)); ++ ++ if (!mtd || section < 0) ++ return -EINVAL; ++ ++ if (!mtd->ooblayout || !mtd->ooblayout->ecc) ++ return -ENOTSUPP; ++ ++ return mtd->ooblayout->ecc(mtd, section, oobecc); ++} ++EXPORT_SYMBOL_GPL(mtd_ooblayout_ecc); ++ ++/** ++ * mtd_ooblayout_free - Get the OOB region definition of a specific free ++ * section ++ * @mtd: MTD device structure ++ * @section: Free section you are interested in. Depending on the layout ++ * you may have all the free bytes stored in a single contiguous ++ * section, or one section per ECC chunk plus an extra section ++ * for the remaining bytes (or other funky layout). ++ * @oobfree: OOB region struct filled with the appropriate free position ++ * information ++ * ++ * This functions return free bytes position in the OOB area. I you want ++ * to get all the free bytes information, then you should call ++ * mtd_ooblayout_free(mtd, section++, oobfree) until it returns -ERANGE. ++ * ++ * Returns zero on success, a negative error code otherwise. ++ */ ++int mtd_ooblayout_free(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oobfree) ++{ ++ memset(oobfree, 0, sizeof(*oobfree)); ++ ++ if (!mtd || section < 0) ++ return -EINVAL; ++ ++ if (!mtd->ooblayout || !mtd->ooblayout->free) ++ return -ENOTSUPP; ++ ++ return mtd->ooblayout->free(mtd, section, oobfree); ++} ++EXPORT_SYMBOL_GPL(mtd_ooblayout_free); ++ ++/** ++ * mtd_ooblayout_find_region - Find the region attached to a specific byte ++ * @mtd: mtd info structure ++ * @byte: the byte we are searching for ++ * @sectionp: pointer where the section id will be stored ++ * @oobregion: used to retrieve the ECC position ++ * @iter: iterator function. Should be either mtd_ooblayout_free or ++ * mtd_ooblayout_ecc depending on the region type you're searching for ++ * ++ * This functions returns the section id and oobregion information of a ++ * specific byte. For example, say you want to know where the 4th ECC byte is ++ * stored, you'll use: ++ * ++ * mtd_ooblayout_find_region(mtd, 3, §ion, &oobregion, mtd_ooblayout_ecc); ++ * ++ * Returns zero on success, a negative error code otherwise. ++ */ ++static int mtd_ooblayout_find_region(struct mtd_info *mtd, int byte, ++ int *sectionp, struct mtd_oob_region *oobregion, ++ int (*iter)(struct mtd_info *, ++ int section, ++ struct mtd_oob_region *oobregion)) ++{ ++ int pos = 0, ret, section = 0; ++ ++ memset(oobregion, 0, sizeof(*oobregion)); ++ ++ while (1) { ++ ret = iter(mtd, section, oobregion); ++ if (ret) ++ return ret; ++ ++ if (pos + oobregion->length > byte) ++ break; ++ ++ pos += oobregion->length; ++ section++; ++ } ++ ++ /* ++ * Adjust region info to make it start at the beginning at the ++ * 'start' ECC byte. ++ */ ++ oobregion->offset += byte - pos; ++ oobregion->length -= byte - pos; ++ *sectionp = section; ++ ++ return 0; ++} ++ ++/** ++ * mtd_ooblayout_find_eccregion - Find the ECC region attached to a specific ++ * ECC byte ++ * @mtd: mtd info structure ++ * @eccbyte: the byte we are searching for ++ * @sectionp: pointer where the section id will be stored ++ * @oobregion: OOB region information ++ * ++ * Works like mtd_ooblayout_find_region() except it searches for a specific ECC ++ * byte. ++ * ++ * Returns zero on success, a negative error code otherwise. ++ */ ++int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte, ++ int *section, ++ struct mtd_oob_region *oobregion) ++{ ++ return mtd_ooblayout_find_region(mtd, eccbyte, section, oobregion, ++ mtd_ooblayout_ecc); ++} ++EXPORT_SYMBOL_GPL(mtd_ooblayout_find_eccregion); ++ ++/** ++ * mtd_ooblayout_get_bytes - Extract OOB bytes from the oob buffer ++ * @mtd: mtd info structure ++ * @buf: destination buffer to store OOB bytes ++ * @oobbuf: OOB buffer ++ * @start: first byte to retrieve ++ * @nbytes: number of bytes to retrieve ++ * @iter: section iterator ++ * ++ * Extract bytes attached to a specific category (ECC or free) ++ * from the OOB buffer and copy them into buf. ++ * ++ * Returns zero on success, a negative error code otherwise. ++ */ ++static int mtd_ooblayout_get_bytes(struct mtd_info *mtd, u8 *buf, ++ const u8 *oobbuf, int start, int nbytes, ++ int (*iter)(struct mtd_info *, ++ int section, ++ struct mtd_oob_region *oobregion)) ++{ ++ struct mtd_oob_region oobregion = { }; ++ int section = 0, ret; ++ ++ ret = mtd_ooblayout_find_region(mtd, start, §ion, ++ &oobregion, iter); ++ ++ while (!ret) { ++ int cnt; ++ ++ cnt = oobregion.length > nbytes ? nbytes : oobregion.length; ++ memcpy(buf, oobbuf + oobregion.offset, cnt); ++ buf += cnt; ++ nbytes -= cnt; ++ ++ if (!nbytes) ++ break; ++ ++ ret = iter(mtd, ++section, &oobregion); ++ } ++ ++ return ret; ++} ++ ++/** ++ * mtd_ooblayout_set_bytes - put OOB bytes into the oob buffer ++ * @mtd: mtd info structure ++ * @buf: source buffer to get OOB bytes from ++ * @oobbuf: OOB buffer ++ * @start: first OOB byte to set ++ * @nbytes: number of OOB bytes to set ++ * @iter: section iterator ++ * ++ * Fill the OOB buffer with data provided in buf. The category (ECC or free) ++ * is selected by passing the appropriate iterator. ++ * ++ * Returns zero on success, a negative error code otherwise. ++ */ ++static int mtd_ooblayout_set_bytes(struct mtd_info *mtd, const u8 *buf, ++ u8 *oobbuf, int start, int nbytes, ++ int (*iter)(struct mtd_info *, ++ int section, ++ struct mtd_oob_region *oobregion)) ++{ ++ struct mtd_oob_region oobregion = { }; ++ int section = 0, ret; ++ ++ ret = mtd_ooblayout_find_region(mtd, start, §ion, ++ &oobregion, iter); ++ ++ while (!ret) { ++ int cnt; ++ ++ cnt = oobregion.length > nbytes ? nbytes : oobregion.length; ++ memcpy(oobbuf + oobregion.offset, buf, cnt); ++ buf += cnt; ++ nbytes -= cnt; ++ ++ if (!nbytes) ++ break; ++ ++ ret = iter(mtd, ++section, &oobregion); ++ } ++ ++ return ret; ++} ++ ++/** ++ * mtd_ooblayout_count_bytes - count the number of bytes in a OOB category ++ * @mtd: mtd info structure ++ * @iter: category iterator ++ * ++ * Count the number of bytes in a given category. ++ * ++ * Returns a positive value on success, a negative error code otherwise. ++ */ ++static int mtd_ooblayout_count_bytes(struct mtd_info *mtd, ++ int (*iter)(struct mtd_info *, ++ int section, ++ struct mtd_oob_region *oobregion)) ++{ ++ struct mtd_oob_region oobregion = { }; ++ int section = 0, ret, nbytes = 0; ++ ++ while (1) { ++ ret = iter(mtd, section++, &oobregion); ++ if (ret) { ++ if (ret == -ERANGE) ++ ret = nbytes; ++ break; ++ } ++ ++ nbytes += oobregion.length; ++ } ++ ++ return ret; ++} ++ ++/** ++ * mtd_ooblayout_get_eccbytes - extract ECC bytes from the oob buffer ++ * @mtd: mtd info structure ++ * @eccbuf: destination buffer to store ECC bytes ++ * @oobbuf: OOB buffer ++ * @start: first ECC byte to retrieve ++ * @nbytes: number of ECC bytes to retrieve ++ * ++ * Works like mtd_ooblayout_get_bytes(), except it acts on ECC bytes. ++ * ++ * Returns zero on success, a negative error code otherwise. ++ */ ++int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf, ++ const u8 *oobbuf, int start, int nbytes) ++{ ++ return mtd_ooblayout_get_bytes(mtd, eccbuf, oobbuf, start, nbytes, ++ mtd_ooblayout_ecc); ++} ++EXPORT_SYMBOL_GPL(mtd_ooblayout_get_eccbytes); ++ ++/** ++ * mtd_ooblayout_set_eccbytes - set ECC bytes into the oob buffer ++ * @mtd: mtd info structure ++ * @eccbuf: source buffer to get ECC bytes from ++ * @oobbuf: OOB buffer ++ * @start: first ECC byte to set ++ * @nbytes: number of ECC bytes to set ++ * ++ * Works like mtd_ooblayout_set_bytes(), except it acts on ECC bytes. ++ * ++ * Returns zero on success, a negative error code otherwise. ++ */ ++int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf, ++ u8 *oobbuf, int start, int nbytes) ++{ ++ return mtd_ooblayout_set_bytes(mtd, eccbuf, oobbuf, start, nbytes, ++ mtd_ooblayout_ecc); ++} ++EXPORT_SYMBOL_GPL(mtd_ooblayout_set_eccbytes); ++ ++/** ++ * mtd_ooblayout_get_databytes - extract data bytes from the oob buffer ++ * @mtd: mtd info structure ++ * @databuf: destination buffer to store ECC bytes ++ * @oobbuf: OOB buffer ++ * @start: first ECC byte to retrieve ++ * @nbytes: number of ECC bytes to retrieve ++ * ++ * Works like mtd_ooblayout_get_bytes(), except it acts on free bytes. ++ * ++ * Returns zero on success, a negative error code otherwise. ++ */ ++int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf, ++ const u8 *oobbuf, int start, int nbytes) ++{ ++ return mtd_ooblayout_get_bytes(mtd, databuf, oobbuf, start, nbytes, ++ mtd_ooblayout_free); ++} ++EXPORT_SYMBOL_GPL(mtd_ooblayout_get_databytes); ++ ++/** ++ * mtd_ooblayout_get_eccbytes - set data bytes into the oob buffer ++ * @mtd: mtd info structure ++ * @eccbuf: source buffer to get data bytes from ++ * @oobbuf: OOB buffer ++ * @start: first ECC byte to set ++ * @nbytes: number of ECC bytes to set ++ * ++ * Works like mtd_ooblayout_get_bytes(), except it acts on free bytes. ++ * ++ * Returns zero on success, a negative error code otherwise. ++ */ ++int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf, ++ u8 *oobbuf, int start, int nbytes) ++{ ++ return mtd_ooblayout_set_bytes(mtd, databuf, oobbuf, start, nbytes, ++ mtd_ooblayout_free); ++} ++EXPORT_SYMBOL_GPL(mtd_ooblayout_set_databytes); ++ ++/** ++ * mtd_ooblayout_count_freebytes - count the number of free bytes in OOB ++ * @mtd: mtd info structure ++ * ++ * Works like mtd_ooblayout_count_bytes(), except it count free bytes. ++ * ++ * Returns zero on success, a negative error code otherwise. ++ */ ++int mtd_ooblayout_count_freebytes(struct mtd_info *mtd) ++{ ++ return mtd_ooblayout_count_bytes(mtd, mtd_ooblayout_free); ++} ++EXPORT_SYMBOL_GPL(mtd_ooblayout_count_freebytes); ++ ++/** ++ * mtd_ooblayout_count_freebytes - count the number of ECC bytes in OOB ++ * @mtd: mtd info structure ++ * ++ * Works like mtd_ooblayout_count_bytes(), except it count ECC bytes. ++ * ++ * Returns zero on success, a negative error code otherwise. ++ */ ++int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd) ++{ ++ return mtd_ooblayout_count_bytes(mtd, mtd_ooblayout_ecc); ++} ++EXPORT_SYMBOL_GPL(mtd_ooblayout_count_eccbytes); ++ + /* + * Method to access the protection register area, present in some flash + * devices. The user data is one time programmable but the factory data is read +--- a/drivers/mtd/mtdcore.h ++++ b/drivers/mtd/mtdcore.h +@@ -10,10 +10,15 @@ int add_mtd_device(struct mtd_info *mtd) + int del_mtd_device(struct mtd_info *mtd); + int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int); + int del_mtd_partitions(struct mtd_info *); ++ ++struct mtd_partitions; ++ + int parse_mtd_partitions(struct mtd_info *master, const char * const *types, +- struct mtd_partition **pparts, ++ struct mtd_partitions *pparts, + struct mtd_part_parser_data *data); + ++void mtd_part_parser_cleanup(struct mtd_partitions *parts); ++ + int __init init_mtdchar(void); + void __exit cleanup_mtdchar(void); + +--- a/drivers/mtd/mtdpart.c ++++ b/drivers/mtd/mtdpart.c +@@ -55,9 +55,12 @@ static void mtd_partition_split(struct m + + /* + * Given a pointer to the MTD object in the mtd_part structure, we can retrieve +- * the pointer to that structure with this macro. ++ * the pointer to that structure. + */ +-#define PART(x) ((struct mtd_part *)(x)) ++static inline struct mtd_part *mtd_to_part(const struct mtd_info *mtd) ++{ ++ return container_of(mtd, struct mtd_part, mtd); ++} + + + /* +@@ -68,7 +71,7 @@ static void mtd_partition_split(struct m + static int part_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + struct mtd_ecc_stats stats; + int res; + +@@ -87,7 +90,7 @@ static int part_read(struct mtd_info *mt + static int part_point(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + + return part->master->_point(part->master, from + part->offset, len, + retlen, virt, phys); +@@ -95,7 +98,7 @@ static int part_point(struct mtd_info *m + + static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + + return part->master->_unpoint(part->master, from + part->offset, len); + } +@@ -105,7 +108,7 @@ static unsigned long part_get_unmapped_a + unsigned long offset, + unsigned long flags) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + + offset += part->offset; + return part->master->_get_unmapped_area(part->master, len, offset, +@@ -115,7 +118,7 @@ static unsigned long part_get_unmapped_a + static int part_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + int res; + + if (from >= mtd->size) +@@ -130,10 +133,7 @@ static int part_read_oob(struct mtd_info + if (ops->oobbuf) { + size_t len, pages; + +- if (ops->mode == MTD_OPS_AUTO_OOB) +- len = mtd->oobavail; +- else +- len = mtd->oobsize; ++ len = mtd_oobavail(mtd, ops); + pages = mtd_div_by_ws(mtd->size, mtd); + pages -= mtd_div_by_ws(from, mtd); + if (ops->ooboffs + ops->ooblen > pages * len) +@@ -153,7 +153,7 @@ static int part_read_oob(struct mtd_info + static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + return part->master->_read_user_prot_reg(part->master, from, len, + retlen, buf); + } +@@ -161,7 +161,7 @@ static int part_read_user_prot_reg(struc + static int part_get_user_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + return part->master->_get_user_prot_info(part->master, len, retlen, + buf); + } +@@ -169,7 +169,7 @@ static int part_get_user_prot_info(struc + static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + return part->master->_read_fact_prot_reg(part->master, from, len, + retlen, buf); + } +@@ -177,7 +177,7 @@ static int part_read_fact_prot_reg(struc + static int part_get_fact_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + return part->master->_get_fact_prot_info(part->master, len, retlen, + buf); + } +@@ -185,7 +185,7 @@ static int part_get_fact_prot_info(struc + static int part_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + return part->master->_write(part->master, to + part->offset, len, + retlen, buf); + } +@@ -193,7 +193,7 @@ static int part_write(struct mtd_info *m + static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + return part->master->_panic_write(part->master, to + part->offset, len, + retlen, buf); + } +@@ -201,7 +201,7 @@ static int part_panic_write(struct mtd_i + static int part_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + + if (to >= mtd->size) + return -EINVAL; +@@ -213,7 +213,7 @@ static int part_write_oob(struct mtd_inf + static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + return part->master->_write_user_prot_reg(part->master, from, len, + retlen, buf); + } +@@ -221,21 +221,21 @@ static int part_write_user_prot_reg(stru + static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + return part->master->_lock_user_prot_reg(part->master, from, len); + } + + static int part_writev(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + return part->master->_writev(part->master, vecs, count, + to + part->offset, retlen); + } + + static int part_erase(struct mtd_info *mtd, struct erase_info *instr) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + int ret; + + +@@ -299,7 +299,7 @@ static int part_erase(struct mtd_info *m + void mtd_erase_callback(struct erase_info *instr) + { + if (instr->mtd->_erase == part_erase) { +- struct mtd_part *part = PART(instr->mtd); ++ struct mtd_part *part = mtd_to_part(instr->mtd); + size_t wrlen = 0; + + if (instr->mtd->flags & MTD_ERASE_PARTIAL) { +@@ -330,13 +330,13 @@ EXPORT_SYMBOL_GPL(mtd_erase_callback); + + static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + return part->master->_lock(part->master, ofs + part->offset, len); + } + + static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + + ofs += part->offset; + if (mtd->flags & MTD_ERASE_PARTIAL) { +@@ -349,45 +349,45 @@ static int part_unlock(struct mtd_info * + + static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + return part->master->_is_locked(part->master, ofs + part->offset, len); + } + + static void part_sync(struct mtd_info *mtd) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + part->master->_sync(part->master); + } + + static int part_suspend(struct mtd_info *mtd) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + return part->master->_suspend(part->master); + } + + static void part_resume(struct mtd_info *mtd) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + part->master->_resume(part->master); + } + + static int part_block_isreserved(struct mtd_info *mtd, loff_t ofs) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + ofs += part->offset; + return part->master->_block_isreserved(part->master, ofs); + } + + static int part_block_isbad(struct mtd_info *mtd, loff_t ofs) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + ofs += part->offset; + return part->master->_block_isbad(part->master, ofs); + } + + static int part_block_markbad(struct mtd_info *mtd, loff_t ofs) + { +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + int res; + + ofs += part->offset; +@@ -397,6 +397,27 @@ static int part_block_markbad(struct mtd + return res; + } + ++static int part_ooblayout_ecc(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oobregion) ++{ ++ struct mtd_part *part = mtd_to_part(mtd); ++ ++ return mtd_ooblayout_ecc(part->master, section, oobregion); ++} ++ ++static int part_ooblayout_free(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oobregion) ++{ ++ struct mtd_part *part = mtd_to_part(mtd); ++ ++ return mtd_ooblayout_free(part->master, section, oobregion); ++} ++ ++static const struct mtd_ooblayout_ops part_ooblayout_ops = { ++ .ecc = part_ooblayout_ecc, ++ .free = part_ooblayout_free, ++}; ++ + static inline void free_partition(struct mtd_part *p) + { + kfree(p->mtd.name); +@@ -614,7 +635,7 @@ static struct mtd_part *allocate_partiti + slave->mtd.erasesize = slave->mtd.size; + } + +- slave->mtd.ecclayout = master->ecclayout; ++ mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops); + slave->mtd.ecc_step_size = master->ecc_step_size; + slave->mtd.ecc_strength = master->ecc_strength; + slave->mtd.bitflip_threshold = master->bitflip_threshold; +@@ -639,7 +660,7 @@ static ssize_t mtd_partition_offset_show + struct device_attribute *attr, char *buf) + { + struct mtd_info *mtd = dev_get_drvdata(dev); +- struct mtd_part *part = PART(mtd); ++ struct mtd_part *part = mtd_to_part(mtd); + return snprintf(buf, PAGE_SIZE, "%lld\n", part->offset); + } + +@@ -677,11 +698,10 @@ int mtd_add_partition(struct mtd_info *m + if (length <= 0) + return -EINVAL; + ++ memset(&part, 0, sizeof(part)); + part.name = name; + part.size = length; + part.offset = offset; +- part.mask_flags = 0; +- part.ecclayout = NULL; + + new = allocate_partition(master, &part, -1, offset); + if (IS_ERR(new)) +@@ -845,7 +865,7 @@ int add_mtd_partitions(struct mtd_info * + static DEFINE_SPINLOCK(part_parser_lock); + static LIST_HEAD(part_parsers); + +-static struct mtd_part_parser *get_partition_parser(const char *name) ++static struct mtd_part_parser *mtd_part_parser_get(const char *name) + { + struct mtd_part_parser *p, *ret = NULL; + +@@ -862,7 +882,20 @@ static struct mtd_part_parser *get_parti + return ret; + } + +-#define put_partition_parser(p) do { module_put((p)->owner); } while (0) ++static inline void mtd_part_parser_put(const struct mtd_part_parser *p) ++{ ++ module_put(p->owner); ++} ++ ++/* ++ * Many partition parsers just expected the core to kfree() all their data in ++ * one chunk. Do that by default. ++ */ ++static void mtd_part_parser_cleanup_default(const struct mtd_partition *pparts, ++ int nr_parts) ++{ ++ kfree(pparts); ++} + + static struct mtd_part_parser * + get_partition_parser_by_type(enum mtd_parser_type type, +@@ -874,7 +907,7 @@ get_partition_parser_by_type(enum mtd_pa + + p = list_prepare_entry(start, &part_parsers, list); + if (start) +- put_partition_parser(start); ++ mtd_part_parser_put(start); + + list_for_each_entry_continue(p, &part_parsers, list) { + if (p->type == type && try_module_get(p->owner)) { +@@ -888,13 +921,19 @@ get_partition_parser_by_type(enum mtd_pa + return ret; + } + +-void register_mtd_parser(struct mtd_part_parser *p) +-{ ++int __register_mtd_parser(struct mtd_part_parser *p, struct module *owner) ++ { ++ p->owner = owner; ++ ++ if (!p->cleanup) ++ p->cleanup = &mtd_part_parser_cleanup_default; ++ + spin_lock(&part_parser_lock); + list_add(&p->list, &part_parsers); + spin_unlock(&part_parser_lock); ++ return 0; + } +-EXPORT_SYMBOL_GPL(register_mtd_parser); ++EXPORT_SYMBOL_GPL(__register_mtd_parser); + + void deregister_mtd_parser(struct mtd_part_parser *p) + { +@@ -954,7 +993,7 @@ static const char * const default_mtd_pa + * parse_mtd_partitions - parse MTD partitions + * @master: the master partition (describes whole MTD device) + * @types: names of partition parsers to try or %NULL +- * @pparts: array of partitions found is returned here ++ * @pparts: info about partitions found is returned here + * @data: MTD partition parser-specific data + * + * This function tries to find partition on MTD device @master. It uses MTD +@@ -966,45 +1005,42 @@ static const char * const default_mtd_pa + * + * This function may return: + * o a negative error code in case of failure +- * o zero if no partitions were found +- * o a positive number of found partitions, in which case on exit @pparts will +- * point to an array containing this number of &struct mtd_info objects. ++ * o zero otherwise, and @pparts will describe the partitions, number of ++ * partitions, and the parser which parsed them. Caller must release ++ * resources with mtd_part_parser_cleanup() when finished with the returned ++ * data. + */ + int parse_mtd_partitions(struct mtd_info *master, const char *const *types, +- struct mtd_partition **pparts, ++ struct mtd_partitions *pparts, + struct mtd_part_parser_data *data) + { + struct mtd_part_parser *parser; + int ret, err = 0; + const char *const *types_of = NULL; + +- if (data && data->of_node) { +- types_of = of_get_probes(data->of_node); +- if (types_of != NULL) +- types = types_of; +- } +- + if (!types) + types = default_mtd_part_types; + + for ( ; *types; types++) { + pr_debug("%s: parsing partitions %s\n", master->name, *types); +- parser = get_partition_parser(*types); ++ parser = mtd_part_parser_get(*types); + if (!parser && !request_module("%s", *types)) +- parser = get_partition_parser(*types); ++ parser = mtd_part_parser_get(*types); + pr_debug("%s: got parser %s\n", master->name, + parser ? parser->name : NULL); + if (!parser) + continue; +- ret = (*parser->parse_fn)(master, pparts, data); ++ ret = (*parser->parse_fn)(master, &pparts->parts, data); + pr_debug("%s: parser %s: %i\n", + master->name, parser->name, ret); +- put_partition_parser(parser); + if (ret > 0) { + printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n", + ret, parser->name, master->name); +- return ret; ++ pparts->nr_parts = ret; ++ pparts->parser = parser; ++ return 0; + } ++ mtd_part_parser_put(parser); + /* + * Stash the first error we see; only report it if no parser + * succeeds +@@ -1034,7 +1070,7 @@ int parse_mtd_partitions_by_type(struct + ret = (*parser->parse_fn)(master, pparts, data); + + if (ret > 0) { +- put_partition_parser(parser); ++ mtd_part_parser_put(parser); + printk(KERN_NOTICE + "%d %s partitions found on MTD device %s\n", + ret, parser->name, master->name); +@@ -1048,6 +1084,22 @@ int parse_mtd_partitions_by_type(struct + } + EXPORT_SYMBOL_GPL(parse_mtd_partitions_by_type); + ++void mtd_part_parser_cleanup(struct mtd_partitions *parts) ++{ ++ const struct mtd_part_parser *parser; ++ ++ if (!parts) ++ return; ++ ++ parser = parts->parser; ++ if (parser) { ++ if (parser->cleanup) ++ parser->cleanup(parts->parts, parts->nr_parts); ++ ++ mtd_part_parser_put(parser); ++ } ++} ++ + int mtd_is_partition(const struct mtd_info *mtd) + { + struct mtd_part *part; +@@ -1070,7 +1122,7 @@ struct mtd_info *mtdpart_get_master(cons + if (!mtd_is_partition(mtd)) + return (struct mtd_info *)mtd; + +- return PART(mtd)->master; ++ return mtd_to_part(mtd)->master; + } + EXPORT_SYMBOL_GPL(mtdpart_get_master); + +@@ -1079,7 +1131,7 @@ uint64_t mtdpart_get_offset(const struct + if (!mtd_is_partition(mtd)) + return 0; + +- return PART(mtd)->offset; ++ return mtd_to_part(mtd)->offset; + } + EXPORT_SYMBOL_GPL(mtdpart_get_offset); + +@@ -1089,6 +1141,6 @@ uint64_t mtd_get_device_size(const struc + if (!mtd_is_partition(mtd)) + return mtd->size; + +- return PART(mtd)->master->size; ++ return mtd_to_part(mtd)->master->size; + } + EXPORT_SYMBOL_GPL(mtd_get_device_size); +--- a/drivers/mtd/mtdswap.c ++++ b/drivers/mtd/mtdswap.c +@@ -346,7 +346,7 @@ static int mtdswap_read_markers(struct m + if (mtd_can_have_bb(d->mtd) && mtd_block_isbad(d->mtd, offset)) + return MTDSWAP_SCANNED_BAD; + +- ops.ooblen = 2 * d->mtd->ecclayout->oobavail; ++ ops.ooblen = 2 * d->mtd->oobavail; + ops.oobbuf = d->oob_buf; + ops.ooboffs = 0; + ops.datbuf = NULL; +@@ -359,7 +359,7 @@ static int mtdswap_read_markers(struct m + + data = (struct mtdswap_oobdata *)d->oob_buf; + data2 = (struct mtdswap_oobdata *) +- (d->oob_buf + d->mtd->ecclayout->oobavail); ++ (d->oob_buf + d->mtd->oobavail); + + if (le16_to_cpu(data->magic) == MTDSWAP_MAGIC_CLEAN) { + eb->erase_count = le32_to_cpu(data->count); +@@ -933,7 +933,7 @@ static unsigned int mtdswap_eblk_passes( + + ops.mode = MTD_OPS_AUTO_OOB; + ops.len = mtd->writesize; +- ops.ooblen = mtd->ecclayout->oobavail; ++ ops.ooblen = mtd->oobavail; + ops.ooboffs = 0; + ops.datbuf = d->page_buf; + ops.oobbuf = d->oob_buf; +@@ -945,7 +945,7 @@ static unsigned int mtdswap_eblk_passes( + for (i = 0; i < mtd_pages; i++) { + patt = mtdswap_test_patt(test + i); + memset(d->page_buf, patt, mtd->writesize); +- memset(d->oob_buf, patt, mtd->ecclayout->oobavail); ++ memset(d->oob_buf, patt, mtd->oobavail); + ret = mtd_write_oob(mtd, pos, &ops); + if (ret) + goto error; +@@ -964,7 +964,7 @@ static unsigned int mtdswap_eblk_passes( + if (p1[j] != patt) + goto error; + +- for (j = 0; j < mtd->ecclayout->oobavail; j++) ++ for (j = 0; j < mtd->oobavail; j++) + if (p2[j] != (unsigned char)patt) + goto error; + +@@ -1387,7 +1387,7 @@ static int mtdswap_init(struct mtdswap_d + if (!d->page_buf) + goto page_buf_fail; + +- d->oob_buf = kmalloc(2 * mtd->ecclayout->oobavail, GFP_KERNEL); ++ d->oob_buf = kmalloc(2 * mtd->oobavail, GFP_KERNEL); + if (!d->oob_buf) + goto oob_buf_fail; + +@@ -1417,7 +1417,6 @@ static void mtdswap_add_mtd(struct mtd_b + unsigned long part; + unsigned int eblocks, eavailable, bad_blocks, spare_cnt; + uint64_t swap_size, use_size, size_limit; +- struct nand_ecclayout *oinfo; + int ret; + + parts = &partitions[0]; +@@ -1447,17 +1446,10 @@ static void mtdswap_add_mtd(struct mtd_b + return; + } + +- oinfo = mtd->ecclayout; +- if (!oinfo) { +- printk(KERN_ERR "%s: mtd%d does not have OOB\n", +- MTDSWAP_PREFIX, mtd->index); +- return; +- } +- +- if (!mtd->oobsize || oinfo->oobavail < MTDSWAP_OOBSIZE) { ++ if (!mtd->oobsize || mtd->oobavail < MTDSWAP_OOBSIZE) { + printk(KERN_ERR "%s: Not enough free bytes in OOB, " + "%d available, %zu needed.\n", +- MTDSWAP_PREFIX, oinfo->oobavail, MTDSWAP_OOBSIZE); ++ MTDSWAP_PREFIX, mtd->oobavail, MTDSWAP_OOBSIZE); + return; + } + +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -55,7 +55,7 @@ config MTD_NAND_DENALI_PCI + config MTD_NAND_DENALI_DT + tristate "Support Denali NAND controller as a DT device" + select MTD_NAND_DENALI +- depends on HAS_DMA && HAVE_CLK ++ depends on HAS_DMA && HAVE_CLK && OF + help + Enable the driver for NAND flash on platforms using a Denali NAND + controller as a DT device. +@@ -74,6 +74,7 @@ config MTD_NAND_DENALI_SCRATCH_REG_ADDR + config MTD_NAND_GPIO + tristate "GPIO assisted NAND Flash driver" + depends on GPIOLIB || COMPILE_TEST ++ depends on HAS_IOMEM + help + This enables a NAND flash driver where control signals are + connected to GPIO pins, and commands and data are communicated +@@ -310,6 +311,7 @@ config MTD_NAND_CAFE + config MTD_NAND_CS553X + tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)" + depends on X86_32 ++ depends on !UML && HAS_IOMEM + help + The CS553x companion chips for the AMD Geode processor + include NAND flash controllers with built-in hardware ECC +@@ -463,6 +465,7 @@ config MTD_NAND_MPC5121_NFC + config MTD_NAND_VF610_NFC + tristate "Support for Freescale NFC for VF610/MPC5125" + depends on (SOC_VF610 || COMPILE_TEST) ++ depends on HAS_IOMEM + help + Enables support for NAND Flash Controller on some Freescale + processors like the VF610, MPC5125, MCF54418 or Kinetis K70. +@@ -480,7 +483,7 @@ config MTD_NAND_MXC + + config MTD_NAND_SH_FLCTL + tristate "Support for NAND on Renesas SuperH FLCTL" +- depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST ++ depends on SUPERH || COMPILE_TEST + depends on HAS_IOMEM + depends on HAS_DMA + help +@@ -519,6 +522,13 @@ config MTD_NAND_JZ4740 + help + Enables support for NAND Flash on JZ4740 SoC based boards. + ++config MTD_NAND_JZ4780 ++ tristate "Support for NAND on JZ4780 SoC" ++ depends on MACH_JZ4780 && JZ4780_NEMC ++ help ++ Enables support for NAND Flash connected to the NEMC on JZ4780 SoC ++ based boards, using the BCH controller for hardware error correction. ++ + config MTD_NAND_FSMC + tristate "Support for NAND on ST Micros FSMC" + depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300 +@@ -546,4 +556,11 @@ config MTD_NAND_HISI504 + help + Enables support for NAND controller on Hisilicon SoC Hip04. + ++config MTD_NAND_QCOM ++ tristate "Support for NAND on QCOM SoCs" ++ depends on ARCH_QCOM ++ help ++ Enables support for NAND flash chips on SoCs containing the EBI2 NAND ++ controller. This controller is found on IPQ806x SoC. ++ + endif # MTD_NAND +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -49,11 +49,13 @@ obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mp + obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o + obj-$(CONFIG_MTD_NAND_RICOH) += r852.o + obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o ++obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o jz4780_bch.o + obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ + obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o + obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ + obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o + obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o + obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/ ++obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o + + nand-objs := nand_base.o nand_bbt.o nand_timings.o +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -48,50 +48,6 @@ + #include + #include + +-/* Define default oob placement schemes for large and small page devices */ +-static struct nand_ecclayout nand_oob_8 = { +- .eccbytes = 3, +- .eccpos = {0, 1, 2}, +- .oobfree = { +- {.offset = 3, +- .length = 2}, +- {.offset = 6, +- .length = 2} } +-}; +- +-static struct nand_ecclayout nand_oob_16 = { +- .eccbytes = 6, +- .eccpos = {0, 1, 2, 3, 6, 7}, +- .oobfree = { +- {.offset = 8, +- . length = 8} } +-}; +- +-static struct nand_ecclayout nand_oob_64 = { +- .eccbytes = 24, +- .eccpos = { +- 40, 41, 42, 43, 44, 45, 46, 47, +- 48, 49, 50, 51, 52, 53, 54, 55, +- 56, 57, 58, 59, 60, 61, 62, 63}, +- .oobfree = { +- {.offset = 2, +- .length = 38} } +-}; +- +-static struct nand_ecclayout nand_oob_128 = { +- .eccbytes = 48, +- .eccpos = { +- 80, 81, 82, 83, 84, 85, 86, 87, +- 88, 89, 90, 91, 92, 93, 94, 95, +- 96, 97, 98, 99, 100, 101, 102, 103, +- 104, 105, 106, 107, 108, 109, 110, 111, +- 112, 113, 114, 115, 116, 117, 118, 119, +- 120, 121, 122, 123, 124, 125, 126, 127}, +- .oobfree = { +- {.offset = 2, +- .length = 78} } +-}; +- + static int nand_get_device(struct mtd_info *mtd, int new_state); + + static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, +@@ -103,10 +59,96 @@ static int nand_do_write_oob(struct mtd_ + */ + DEFINE_LED_TRIGGER(nand_led_trigger); + ++/* Define default oob placement schemes for large and small page devices */ ++static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oobregion) ++{ ++ struct nand_chip *chip = mtd_to_nand(mtd); ++ struct nand_ecc_ctrl *ecc = &chip->ecc; ++ ++ if (section > 1) ++ return -ERANGE; ++ ++ if (!section) { ++ oobregion->offset = 0; ++ oobregion->length = 4; ++ } else { ++ oobregion->offset = 6; ++ oobregion->length = ecc->total - 4; ++ } ++ ++ return 0; ++} ++ ++static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oobregion) ++{ ++ if (section > 1) ++ return -ERANGE; ++ ++ if (mtd->oobsize == 16) { ++ if (section) ++ return -ERANGE; ++ ++ oobregion->length = 8; ++ oobregion->offset = 8; ++ } else { ++ oobregion->length = 2; ++ if (!section) ++ oobregion->offset = 3; ++ else ++ oobregion->offset = 6; ++ } ++ ++ return 0; ++} ++ ++const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = { ++ .ecc = nand_ooblayout_ecc_sp, ++ .free = nand_ooblayout_free_sp, ++}; ++EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops); ++ ++static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oobregion) ++{ ++ struct nand_chip *chip = mtd_to_nand(mtd); ++ struct nand_ecc_ctrl *ecc = &chip->ecc; ++ ++ if (section) ++ return -ERANGE; ++ ++ oobregion->length = ecc->total; ++ oobregion->offset = mtd->oobsize - oobregion->length; ++ ++ return 0; ++} ++ ++static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oobregion) ++{ ++ struct nand_chip *chip = mtd_to_nand(mtd); ++ struct nand_ecc_ctrl *ecc = &chip->ecc; ++ ++ if (section) ++ return -ERANGE; ++ ++ oobregion->length = mtd->oobsize - ecc->total - 2; ++ oobregion->offset = 2; ++ ++ return 0; ++} ++ ++const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = { ++ .ecc = nand_ooblayout_ecc_lp, ++ .free = nand_ooblayout_free_lp, ++}; ++EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops); ++ + static int check_offs_len(struct mtd_info *mtd, + loff_t ofs, uint64_t len) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + int ret = 0; + + /* Start address must align on block boundary */ +@@ -132,7 +174,7 @@ static int check_offs_len(struct mtd_inf + */ + static void nand_release_device(struct mtd_info *mtd) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + /* Release the controller and the chip */ + spin_lock(&chip->controller->lock); +@@ -150,7 +192,7 @@ static void nand_release_device(struct m + */ + static uint8_t nand_read_byte(struct mtd_info *mtd) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + return readb(chip->IO_ADDR_R); + } + +@@ -163,7 +205,7 @@ static uint8_t nand_read_byte(struct mtd + */ + static uint8_t nand_read_byte16(struct mtd_info *mtd) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + return (uint8_t) cpu_to_le16(readw(chip->IO_ADDR_R)); + } + +@@ -175,7 +217,7 @@ static uint8_t nand_read_byte16(struct m + */ + static u16 nand_read_word(struct mtd_info *mtd) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + return readw(chip->IO_ADDR_R); + } + +@@ -188,7 +230,7 @@ static u16 nand_read_word(struct mtd_inf + */ + static void nand_select_chip(struct mtd_info *mtd, int chipnr) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + switch (chipnr) { + case -1: +@@ -211,7 +253,7 @@ static void nand_select_chip(struct mtd_ + */ + static void nand_write_byte(struct mtd_info *mtd, uint8_t byte) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + chip->write_buf(mtd, &byte, 1); + } +@@ -225,7 +267,7 @@ static void nand_write_byte(struct mtd_i + */ + static void nand_write_byte16(struct mtd_info *mtd, uint8_t byte) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + uint16_t word = byte; + + /* +@@ -257,7 +299,7 @@ static void nand_write_byte16(struct mtd + */ + static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + iowrite8_rep(chip->IO_ADDR_W, buf, len); + } +@@ -272,7 +314,7 @@ static void nand_write_buf(struct mtd_in + */ + static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + ioread8_rep(chip->IO_ADDR_R, buf, len); + } +@@ -287,7 +329,7 @@ static void nand_read_buf(struct mtd_inf + */ + static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + u16 *p = (u16 *) buf; + + iowrite16_rep(chip->IO_ADDR_W, p, len >> 1); +@@ -303,7 +345,7 @@ static void nand_write_buf16(struct mtd_ + */ + static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + u16 *p = (u16 *) buf; + + ioread16_rep(chip->IO_ADDR_R, p, len >> 1); +@@ -313,14 +355,13 @@ static void nand_read_buf16(struct mtd_i + * nand_block_bad - [DEFAULT] Read bad block marker from the chip + * @mtd: MTD device structure + * @ofs: offset from device start +- * @getchip: 0, if the chip is already selected + * + * Check, if the block is bad. + */ +-static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) ++static int nand_block_bad(struct mtd_info *mtd, loff_t ofs) + { +- int page, chipnr, res = 0, i = 0; +- struct nand_chip *chip = mtd->priv; ++ int page, res = 0, i = 0; ++ struct nand_chip *chip = mtd_to_nand(mtd); + u16 bad; + + if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) +@@ -328,15 +369,6 @@ static int nand_block_bad(struct mtd_inf + + page = (int)(ofs >> chip->page_shift) & chip->pagemask; + +- if (getchip) { +- chipnr = (int)(ofs >> chip->chip_shift); +- +- nand_get_device(mtd, FL_READING); +- +- /* Select the NAND device */ +- chip->select_chip(mtd, chipnr); +- } +- + do { + if (chip->options & NAND_BUSWIDTH_16) { + chip->cmdfunc(mtd, NAND_CMD_READOOB, +@@ -361,11 +393,6 @@ static int nand_block_bad(struct mtd_inf + i++; + } while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE)); + +- if (getchip) { +- chip->select_chip(mtd, -1); +- nand_release_device(mtd); +- } +- + return res; + } + +@@ -380,7 +407,7 @@ static int nand_block_bad(struct mtd_inf + */ + static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + struct mtd_oob_ops ops; + uint8_t buf[2] = { 0, 0 }; + int ret = 0, res, i = 0; +@@ -430,7 +457,7 @@ static int nand_default_block_markbad(st + */ + static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + int res, ret = 0; + + if (!(chip->bbt_options & NAND_BBT_NO_OOB_BBM)) { +@@ -471,7 +498,7 @@ static int nand_block_markbad_lowlevel(s + */ + static int nand_check_wp(struct mtd_info *mtd) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + /* Broken xD cards report WP despite being writable */ + if (chip->options & NAND_BROKEN_XD) +@@ -491,7 +518,7 @@ static int nand_check_wp(struct mtd_info + */ + static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + if (!chip->bbt) + return 0; +@@ -503,19 +530,17 @@ static int nand_block_isreserved(struct + * nand_block_checkbad - [GENERIC] Check if a block is marked bad + * @mtd: MTD device structure + * @ofs: offset from device start +- * @getchip: 0, if the chip is already selected + * @allowbbt: 1, if its allowed to access the bbt area + * + * Check, if the block is bad. Either by reading the bad block table or + * calling of the scan function. + */ +-static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, +- int allowbbt) ++static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + if (!chip->bbt) +- return chip->block_bad(mtd, ofs, getchip); ++ return chip->block_bad(mtd, ofs); + + /* Return info from the table */ + return nand_isbad_bbt(mtd, ofs, allowbbt); +@@ -531,7 +556,7 @@ static int nand_block_checkbad(struct mt + */ + static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + int i; + + /* Wait for the device to get ready */ +@@ -551,7 +576,7 @@ static void panic_nand_wait_ready(struct + */ + void nand_wait_ready(struct mtd_info *mtd) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + unsigned long timeo = 400; + + if (in_interrupt() || oops_in_progress) +@@ -566,8 +591,8 @@ void nand_wait_ready(struct mtd_info *mt + cond_resched(); + } while (time_before(jiffies, timeo)); + +- pr_warn_ratelimited( +- "timeout while waiting for chip to become ready\n"); ++ if (!chip->dev_ready(mtd)) ++ pr_warn_ratelimited("timeout while waiting for chip to become ready\n"); + out: + led_trigger_event(nand_led_trigger, LED_OFF); + } +@@ -582,7 +607,7 @@ EXPORT_SYMBOL_GPL(nand_wait_ready); + */ + static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo) + { +- register struct nand_chip *chip = mtd->priv; ++ register struct nand_chip *chip = mtd_to_nand(mtd); + + timeo = jiffies + msecs_to_jiffies(timeo); + do { +@@ -605,7 +630,7 @@ static void nand_wait_status_ready(struc + static void nand_command(struct mtd_info *mtd, unsigned int command, + int column, int page_addr) + { +- register struct nand_chip *chip = mtd->priv; ++ register struct nand_chip *chip = mtd_to_nand(mtd); + int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; + + /* Write out the command to the device */ +@@ -708,7 +733,7 @@ static void nand_command(struct mtd_info + static void nand_command_lp(struct mtd_info *mtd, unsigned int command, + int column, int page_addr) + { +- register struct nand_chip *chip = mtd->priv; ++ register struct nand_chip *chip = mtd_to_nand(mtd); + + /* Emulate NAND_CMD_READOOB */ + if (command == NAND_CMD_READOOB) { +@@ -832,7 +857,7 @@ static void panic_nand_get_device(struct + static int + nand_get_device(struct mtd_info *mtd, int new_state) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + spinlock_t *lock = &chip->controller->lock; + wait_queue_head_t *wq = &chip->controller->wq; + DECLARE_WAITQUEUE(wait, current); +@@ -952,7 +977,7 @@ static int __nand_unlock(struct mtd_info + { + int ret = 0; + int status, page; +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + /* Submit address of first page to unlock */ + page = ofs >> chip->page_shift; +@@ -987,7 +1012,7 @@ int nand_unlock(struct mtd_info *mtd, lo + { + int ret = 0; + int chipnr; +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + pr_debug("%s: start = 0x%012llx, len = %llu\n", + __func__, (unsigned long long)ofs, len); +@@ -1050,7 +1075,7 @@ int nand_lock(struct mtd_info *mtd, loff + { + int ret = 0; + int chipnr, status, page; +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + pr_debug("%s: start = 0x%012llx, len = %llu\n", + __func__, (unsigned long long)ofs, len); +@@ -1309,13 +1334,12 @@ static int nand_read_page_raw_syndrome(s + static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) + { +- int i, eccsize = chip->ecc.size; ++ int i, eccsize = chip->ecc.size, ret; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *p = buf; + uint8_t *ecc_calc = chip->buffers->ecccalc; + uint8_t *ecc_code = chip->buffers->ecccode; +- uint32_t *eccpos = chip->ecc.layout->eccpos; + unsigned int max_bitflips = 0; + + chip->ecc.read_page_raw(mtd, chip, buf, 1, page); +@@ -1323,8 +1347,10 @@ static int nand_read_page_swecc(struct m + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + +- for (i = 0; i < chip->ecc.total; i++) +- ecc_code[i] = chip->oob_poi[eccpos[i]]; ++ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, ++ chip->ecc.total); ++ if (ret) ++ return ret; + + eccsteps = chip->ecc.steps; + p = buf; +@@ -1356,14 +1382,14 @@ static int nand_read_subpage(struct mtd_ + uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, + int page) + { +- int start_step, end_step, num_steps; +- uint32_t *eccpos = chip->ecc.layout->eccpos; ++ int start_step, end_step, num_steps, ret; + uint8_t *p; + int data_col_addr, i, gaps = 0; + int datafrag_len, eccfrag_len, aligned_len, aligned_pos; + int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1; +- int index; ++ int index, section = 0; + unsigned int max_bitflips = 0; ++ struct mtd_oob_region oobregion = { }; + + /* Column address within the page aligned to ECC size (256bytes) */ + start_step = data_offs / chip->ecc.size; +@@ -1391,12 +1417,13 @@ static int nand_read_subpage(struct mtd_ + * The performance is faster if we position offsets according to + * ecc.pos. Let's make sure that there are no gaps in ECC positions. + */ +- for (i = 0; i < eccfrag_len - 1; i++) { +- if (eccpos[i + index] + 1 != eccpos[i + index + 1]) { +- gaps = 1; +- break; +- } +- } ++ ret = mtd_ooblayout_find_eccregion(mtd, index, §ion, &oobregion); ++ if (ret) ++ return ret; ++ ++ if (oobregion.length < eccfrag_len) ++ gaps = 1; ++ + if (gaps) { + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); +@@ -1405,20 +1432,23 @@ static int nand_read_subpage(struct mtd_ + * Send the command to read the particular ECC bytes take care + * about buswidth alignment in read_buf. + */ +- aligned_pos = eccpos[index] & ~(busw - 1); ++ aligned_pos = oobregion.offset & ~(busw - 1); + aligned_len = eccfrag_len; +- if (eccpos[index] & (busw - 1)) ++ if (oobregion.offset & (busw - 1)) + aligned_len++; +- if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1)) ++ if ((oobregion.offset + (num_steps * chip->ecc.bytes)) & ++ (busw - 1)) + aligned_len++; + + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, +- mtd->writesize + aligned_pos, -1); ++ mtd->writesize + aligned_pos, -1); + chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); + } + +- for (i = 0; i < eccfrag_len; i++) +- chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]]; ++ ret = mtd_ooblayout_get_eccbytes(mtd, chip->buffers->ecccode, ++ chip->oob_poi, index, eccfrag_len); ++ if (ret) ++ return ret; + + p = bufpoi + data_col_addr; + for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) { +@@ -1426,6 +1456,16 @@ static int nand_read_subpage(struct mtd_ + + stat = chip->ecc.correct(mtd, p, + &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]); ++ if (stat == -EBADMSG && ++ (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) { ++ /* check for empty pages with bitflips */ ++ stat = nand_check_erased_ecc_chunk(p, chip->ecc.size, ++ &chip->buffers->ecccode[i], ++ chip->ecc.bytes, ++ NULL, 0, ++ chip->ecc.strength); ++ } ++ + if (stat < 0) { + mtd->ecc_stats.failed++; + } else { +@@ -1449,13 +1489,12 @@ static int nand_read_subpage(struct mtd_ + static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) + { +- int i, eccsize = chip->ecc.size; ++ int i, eccsize = chip->ecc.size, ret; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *p = buf; + uint8_t *ecc_calc = chip->buffers->ecccalc; + uint8_t *ecc_code = chip->buffers->ecccode; +- uint32_t *eccpos = chip->ecc.layout->eccpos; + unsigned int max_bitflips = 0; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { +@@ -1465,8 +1504,10 @@ static int nand_read_page_hwecc(struct m + } + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + +- for (i = 0; i < chip->ecc.total; i++) +- ecc_code[i] = chip->oob_poi[eccpos[i]]; ++ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, ++ chip->ecc.total); ++ if (ret) ++ return ret; + + eccsteps = chip->ecc.steps; + p = buf; +@@ -1475,6 +1516,15 @@ static int nand_read_page_hwecc(struct m + int stat; + + stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); ++ if (stat == -EBADMSG && ++ (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) { ++ /* check for empty pages with bitflips */ ++ stat = nand_check_erased_ecc_chunk(p, eccsize, ++ &ecc_code[i], eccbytes, ++ NULL, 0, ++ chip->ecc.strength); ++ } ++ + if (stat < 0) { + mtd->ecc_stats.failed++; + } else { +@@ -1502,12 +1552,11 @@ static int nand_read_page_hwecc(struct m + static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, int oob_required, int page) + { +- int i, eccsize = chip->ecc.size; ++ int i, eccsize = chip->ecc.size, ret; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *p = buf; + uint8_t *ecc_code = chip->buffers->ecccode; +- uint32_t *eccpos = chip->ecc.layout->eccpos; + uint8_t *ecc_calc = chip->buffers->ecccalc; + unsigned int max_bitflips = 0; + +@@ -1516,8 +1565,10 @@ static int nand_read_page_hwecc_oob_firs + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + +- for (i = 0; i < chip->ecc.total; i++) +- ecc_code[i] = chip->oob_poi[eccpos[i]]; ++ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, ++ chip->ecc.total); ++ if (ret) ++ return ret; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; +@@ -1527,6 +1578,15 @@ static int nand_read_page_hwecc_oob_firs + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + + stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL); ++ if (stat == -EBADMSG && ++ (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) { ++ /* check for empty pages with bitflips */ ++ stat = nand_check_erased_ecc_chunk(p, eccsize, ++ &ecc_code[i], eccbytes, ++ NULL, 0, ++ chip->ecc.strength); ++ } ++ + if (stat < 0) { + mtd->ecc_stats.failed++; + } else { +@@ -1554,6 +1614,7 @@ static int nand_read_page_syndrome(struc + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; ++ int eccpadbytes = eccbytes + chip->ecc.prepad + chip->ecc.postpad; + uint8_t *p = buf; + uint8_t *oob = chip->oob_poi; + unsigned int max_bitflips = 0; +@@ -1573,19 +1634,29 @@ static int nand_read_page_syndrome(struc + chip->read_buf(mtd, oob, eccbytes); + stat = chip->ecc.correct(mtd, p, oob, NULL); + +- if (stat < 0) { +- mtd->ecc_stats.failed++; +- } else { +- mtd->ecc_stats.corrected += stat; +- max_bitflips = max_t(unsigned int, max_bitflips, stat); +- } +- + oob += eccbytes; + + if (chip->ecc.postpad) { + chip->read_buf(mtd, oob, chip->ecc.postpad); + oob += chip->ecc.postpad; + } ++ ++ if (stat == -EBADMSG && ++ (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) { ++ /* check for empty pages with bitflips */ ++ stat = nand_check_erased_ecc_chunk(p, chip->ecc.size, ++ oob - eccpadbytes, ++ eccpadbytes, ++ NULL, 0, ++ chip->ecc.strength); ++ } ++ ++ if (stat < 0) { ++ mtd->ecc_stats.failed++; ++ } else { ++ mtd->ecc_stats.corrected += stat; ++ max_bitflips = max_t(unsigned int, max_bitflips, stat); ++ } + } + + /* Calculate remaining oob bytes */ +@@ -1598,14 +1669,17 @@ static int nand_read_page_syndrome(struc + + /** + * nand_transfer_oob - [INTERN] Transfer oob to client buffer +- * @chip: nand chip structure ++ * @mtd: mtd info structure + * @oob: oob destination address + * @ops: oob ops structure + * @len: size of oob to transfer + */ +-static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob, ++static uint8_t *nand_transfer_oob(struct mtd_info *mtd, uint8_t *oob, + struct mtd_oob_ops *ops, size_t len) + { ++ struct nand_chip *chip = mtd_to_nand(mtd); ++ int ret; ++ + switch (ops->mode) { + + case MTD_OPS_PLACE_OOB: +@@ -1613,31 +1687,12 @@ static uint8_t *nand_transfer_oob(struct + memcpy(oob, chip->oob_poi + ops->ooboffs, len); + return oob + len; + +- case MTD_OPS_AUTO_OOB: { +- struct nand_oobfree *free = chip->ecc.layout->oobfree; +- uint32_t boffs = 0, roffs = ops->ooboffs; +- size_t bytes = 0; +- +- for (; free->length && len; free++, len -= bytes) { +- /* Read request not from offset 0? */ +- if (unlikely(roffs)) { +- if (roffs >= free->length) { +- roffs -= free->length; +- continue; +- } +- boffs = free->offset + roffs; +- bytes = min_t(size_t, len, +- (free->length - roffs)); +- roffs = 0; +- } else { +- bytes = min_t(size_t, len, free->length); +- boffs = free->offset; +- } +- memcpy(oob, chip->oob_poi + boffs, bytes); +- oob += bytes; +- } +- return oob; +- } ++ case MTD_OPS_AUTO_OOB: ++ ret = mtd_ooblayout_get_databytes(mtd, oob, chip->oob_poi, ++ ops->ooboffs, len); ++ BUG_ON(ret); ++ return oob + len; ++ + default: + BUG(); + } +@@ -1655,7 +1710,7 @@ static uint8_t *nand_transfer_oob(struct + */ + static int nand_setup_read_retry(struct mtd_info *mtd, int retry_mode) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + pr_debug("setting READ RETRY mode %d\n", retry_mode); + +@@ -1680,12 +1735,11 @@ static int nand_do_read_ops(struct mtd_i + struct mtd_oob_ops *ops) + { + int chipnr, page, realpage, col, bytes, aligned, oob_required; +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + int ret = 0; + uint32_t readlen = ops->len; + uint32_t oobreadlen = ops->ooblen; +- uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ? +- mtd->oobavail : mtd->oobsize; ++ uint32_t max_oobsize = mtd_oobavail(mtd, ops); + + uint8_t *bufpoi, *oob, *buf; + int use_bufpoi; +@@ -1772,7 +1826,7 @@ read_retry: + int toread = min(oobreadlen, max_oobsize); + + if (toread) { +- oob = nand_transfer_oob(chip, ++ oob = nand_transfer_oob(mtd, + oob, ops, toread); + oobreadlen -= toread; + } +@@ -2024,7 +2078,7 @@ static int nand_do_read_oob(struct mtd_i + struct mtd_oob_ops *ops) + { + int page, realpage, chipnr; +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + struct mtd_ecc_stats stats; + int readlen = ops->ooblen; + int len; +@@ -2036,10 +2090,7 @@ static int nand_do_read_oob(struct mtd_i + + stats = mtd->ecc_stats; + +- if (ops->mode == MTD_OPS_AUTO_OOB) +- len = chip->ecc.layout->oobavail; +- else +- len = mtd->oobsize; ++ len = mtd_oobavail(mtd, ops); + + if (unlikely(ops->ooboffs >= len)) { + pr_debug("%s: attempt to start read outside oob\n", +@@ -2073,7 +2124,7 @@ static int nand_do_read_oob(struct mtd_i + break; + + len = min(len, readlen); +- buf = nand_transfer_oob(chip, buf, ops, len); ++ buf = nand_transfer_oob(mtd, buf, ops, len); + + if (chip->options & NAND_NEED_READRDY) { + /* Apply delay or wait for ready/busy pin */ +@@ -2232,19 +2283,20 @@ static int nand_write_page_swecc(struct + const uint8_t *buf, int oob_required, + int page) + { +- int i, eccsize = chip->ecc.size; ++ int i, eccsize = chip->ecc.size, ret; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *ecc_calc = chip->buffers->ecccalc; + const uint8_t *p = buf; +- uint32_t *eccpos = chip->ecc.layout->eccpos; + + /* Software ECC calculation */ + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + +- for (i = 0; i < chip->ecc.total; i++) +- chip->oob_poi[eccpos[i]] = ecc_calc[i]; ++ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, ++ chip->ecc.total); ++ if (ret) ++ return ret; + + return chip->ecc.write_page_raw(mtd, chip, buf, 1, page); + } +@@ -2261,12 +2313,11 @@ static int nand_write_page_hwecc(struct + const uint8_t *buf, int oob_required, + int page) + { +- int i, eccsize = chip->ecc.size; ++ int i, eccsize = chip->ecc.size, ret; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *ecc_calc = chip->buffers->ecccalc; + const uint8_t *p = buf; +- uint32_t *eccpos = chip->ecc.layout->eccpos; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); +@@ -2274,8 +2325,10 @@ static int nand_write_page_hwecc(struct + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + } + +- for (i = 0; i < chip->ecc.total; i++) +- chip->oob_poi[eccpos[i]] = ecc_calc[i]; ++ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, ++ chip->ecc.total); ++ if (ret) ++ return ret; + + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + +@@ -2303,11 +2356,10 @@ static int nand_write_subpage_hwecc(stru + int ecc_size = chip->ecc.size; + int ecc_bytes = chip->ecc.bytes; + int ecc_steps = chip->ecc.steps; +- uint32_t *eccpos = chip->ecc.layout->eccpos; + uint32_t start_step = offset / ecc_size; + uint32_t end_step = (offset + data_len - 1) / ecc_size; + int oob_bytes = mtd->oobsize / ecc_steps; +- int step, i; ++ int step, ret; + + for (step = 0; step < ecc_steps; step++) { + /* configure controller for WRITE access */ +@@ -2335,8 +2387,10 @@ static int nand_write_subpage_hwecc(stru + /* copy calculated ECC for whole page to chip->buffer->oob */ + /* this include masked-value(0xFF) for unwritten subpages */ + ecc_calc = chip->buffers->ecccalc; +- for (i = 0; i < chip->ecc.total; i++) +- chip->oob_poi[eccpos[i]] = ecc_calc[i]; ++ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, ++ chip->ecc.total); ++ if (ret) ++ return ret; + + /* write OOB buffer to NAND device */ + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); +@@ -2472,7 +2526,8 @@ static int nand_write_page(struct mtd_in + static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len, + struct mtd_oob_ops *ops) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); ++ int ret; + + /* + * Initialise to all 0xFF, to avoid the possibility of left over OOB +@@ -2487,31 +2542,12 @@ static uint8_t *nand_fill_oob(struct mtd + memcpy(chip->oob_poi + ops->ooboffs, oob, len); + return oob + len; + +- case MTD_OPS_AUTO_OOB: { +- struct nand_oobfree *free = chip->ecc.layout->oobfree; +- uint32_t boffs = 0, woffs = ops->ooboffs; +- size_t bytes = 0; +- +- for (; free->length && len; free++, len -= bytes) { +- /* Write request not from offset 0? */ +- if (unlikely(woffs)) { +- if (woffs >= free->length) { +- woffs -= free->length; +- continue; +- } +- boffs = free->offset + woffs; +- bytes = min_t(size_t, len, +- (free->length - woffs)); +- woffs = 0; +- } else { +- bytes = min_t(size_t, len, free->length); +- boffs = free->offset; +- } +- memcpy(chip->oob_poi + boffs, oob, bytes); +- oob += bytes; +- } +- return oob; +- } ++ case MTD_OPS_AUTO_OOB: ++ ret = mtd_ooblayout_set_databytes(mtd, oob, chip->oob_poi, ++ ops->ooboffs, len); ++ BUG_ON(ret); ++ return oob + len; ++ + default: + BUG(); + } +@@ -2532,12 +2568,11 @@ static int nand_do_write_ops(struct mtd_ + struct mtd_oob_ops *ops) + { + int chipnr, realpage, page, blockmask, column; +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + uint32_t writelen = ops->len; + + uint32_t oobwritelen = ops->ooblen; +- uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ? +- mtd->oobavail : mtd->oobsize; ++ uint32_t oobmaxlen = mtd_oobavail(mtd, ops); + + uint8_t *oob = ops->oobbuf; + uint8_t *buf = ops->datbuf; +@@ -2662,7 +2697,7 @@ err_out: + static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const uint8_t *buf) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + struct mtd_oob_ops ops; + int ret; + +@@ -2722,15 +2757,12 @@ static int nand_do_write_oob(struct mtd_ + struct mtd_oob_ops *ops) + { + int chipnr, page, status, len; +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + pr_debug("%s: to = 0x%08x, len = %i\n", + __func__, (unsigned int)to, (int)ops->ooblen); + +- if (ops->mode == MTD_OPS_AUTO_OOB) +- len = chip->ecc.layout->oobavail; +- else +- len = mtd->oobsize; ++ len = mtd_oobavail(mtd, ops); + + /* Do not allow write past end of page */ + if ((ops->ooboffs + ops->ooblen) > len) { +@@ -2847,7 +2879,7 @@ out: + */ + static int single_erase(struct mtd_info *mtd, int page) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + /* Send commands to erase a block */ + chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); + chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); +@@ -2879,7 +2911,7 @@ int nand_erase_nand(struct mtd_info *mtd + int allowbbt) + { + int page, status, pages_per_block, ret, chipnr; +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + loff_t len; + + pr_debug("%s: start = 0x%012llx, len = %llu\n", +@@ -2918,7 +2950,7 @@ int nand_erase_nand(struct mtd_info *mtd + while (len) { + /* Check if we have a bad block, we do not erase bad blocks! */ + if (nand_block_checkbad(mtd, ((loff_t) page) << +- chip->page_shift, 0, allowbbt)) { ++ chip->page_shift, allowbbt)) { + pr_warn("%s: attempt to erase a bad block at page 0x%08x\n", + __func__, page); + instr->state = MTD_ERASE_FAILED; +@@ -3005,7 +3037,20 @@ static void nand_sync(struct mtd_info *m + */ + static int nand_block_isbad(struct mtd_info *mtd, loff_t offs) + { +- return nand_block_checkbad(mtd, offs, 1, 0); ++ struct nand_chip *chip = mtd_to_nand(mtd); ++ int chipnr = (int)(offs >> chip->chip_shift); ++ int ret; ++ ++ /* Select the NAND device */ ++ nand_get_device(mtd, FL_READING); ++ chip->select_chip(mtd, chipnr); ++ ++ ret = nand_block_checkbad(mtd, offs, 0); ++ ++ chip->select_chip(mtd, -1); ++ nand_release_device(mtd); ++ ++ return ret; + } + + /** +@@ -3094,7 +3139,7 @@ static int nand_suspend(struct mtd_info + */ + static void nand_resume(struct mtd_info *mtd) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + if (chip->state == FL_PM_SUSPENDED) + nand_release_device(mtd); +@@ -3266,7 +3311,7 @@ ext_out: + + static int nand_setup_read_retry_micron(struct mtd_info *mtd, int retry_mode) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode}; + + return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY, +@@ -3937,10 +3982,13 @@ ident_done: + return type; + } + +-static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip, +- struct device_node *dn) ++static int nand_dt_init(struct nand_chip *chip) + { +- int ecc_mode, ecc_strength, ecc_step; ++ struct device_node *dn = nand_get_flash_node(chip); ++ int ecc_mode, ecc_algo, ecc_strength, ecc_step; ++ ++ if (!dn) ++ return 0; + + if (of_get_nand_bus_width(dn) == 16) + chip->options |= NAND_BUSWIDTH_16; +@@ -3949,6 +3997,7 @@ static int nand_dt_init(struct mtd_info + chip->bbt_options |= NAND_BBT_USE_FLASH; + + ecc_mode = of_get_nand_ecc_mode(dn); ++ ecc_algo = of_get_nand_ecc_algo(dn); + ecc_strength = of_get_nand_ecc_strength(dn); + ecc_step = of_get_nand_ecc_step_size(dn); + +@@ -3961,6 +4010,9 @@ static int nand_dt_init(struct mtd_info + if (ecc_mode >= 0) + chip->ecc.mode = ecc_mode; + ++ if (ecc_algo >= 0) ++ chip->ecc.algo = ecc_algo; ++ + if (ecc_strength >= 0) + chip->ecc.strength = ecc_strength; + +@@ -3984,15 +4036,16 @@ int nand_scan_ident(struct mtd_info *mtd + struct nand_flash_dev *table) + { + int i, nand_maf_id, nand_dev_id; +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_flash_dev *type; + int ret; + +- if (chip->flash_node) { +- ret = nand_dt_init(mtd, chip, chip->flash_node); +- if (ret) +- return ret; +- } ++ ret = nand_dt_init(chip); ++ if (ret) ++ return ret; ++ ++ if (!mtd->name && mtd->dev.parent) ++ mtd->name = dev_name(mtd->dev.parent); + + if (!mtd->name && mtd->dev.parent) + mtd->name = dev_name(mtd->dev.parent); +@@ -4055,7 +4108,7 @@ EXPORT_SYMBOL(nand_scan_ident); + */ + static bool nand_ecc_strength_good(struct mtd_info *mtd) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &chip->ecc; + int corr, ds_corr; + +@@ -4083,10 +4136,10 @@ static bool nand_ecc_strength_good(struc + */ + int nand_scan_tail(struct mtd_info *mtd) + { +- int i; +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &chip->ecc; + struct nand_buffers *nbuf; ++ int ret; + + /* New bad blocks should be marked in OOB, flash-based BBT, or both */ + BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && +@@ -4113,19 +4166,15 @@ int nand_scan_tail(struct mtd_info *mtd) + /* + * If no default placement scheme is given, select an appropriate one. + */ +- if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) { ++ if (!mtd->ooblayout && (ecc->mode != NAND_ECC_SOFT_BCH)) { + switch (mtd->oobsize) { + case 8: +- ecc->layout = &nand_oob_8; +- break; + case 16: +- ecc->layout = &nand_oob_16; ++ mtd_set_ooblayout(mtd, &nand_ooblayout_sp_ops); + break; + case 64: +- ecc->layout = &nand_oob_64; +- break; + case 128: +- ecc->layout = &nand_oob_128; ++ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); + break; + default: + pr_warn("No oob scheme defined for oobsize %d\n", +@@ -4168,7 +4217,7 @@ int nand_scan_tail(struct mtd_info *mtd) + ecc->write_oob = nand_write_oob_std; + if (!ecc->read_subpage) + ecc->read_subpage = nand_read_subpage; +- if (!ecc->write_subpage) ++ if (!ecc->write_subpage && ecc->hwctl && ecc->calculate) + ecc->write_subpage = nand_write_subpage_hwecc; + + case NAND_ECC_HW_SYNDROME: +@@ -4246,10 +4295,8 @@ int nand_scan_tail(struct mtd_info *mtd) + } + + /* See nand_bch_init() for details. */ +- ecc->bytes = DIV_ROUND_UP( +- ecc->strength * fls(8 * ecc->size), 8); +- ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes, +- &ecc->layout); ++ ecc->bytes = 0; ++ ecc->priv = nand_bch_init(mtd); + if (!ecc->priv) { + pr_warn("BCH ECC initialization failed!\n"); + BUG(); +@@ -4280,20 +4327,9 @@ int nand_scan_tail(struct mtd_info *mtd) + if (!ecc->write_oob_raw) + ecc->write_oob_raw = ecc->write_oob; + +- /* +- * The number of bytes available for a client to place data into +- * the out of band area. +- */ +- ecc->layout->oobavail = 0; +- for (i = 0; ecc->layout->oobfree[i].length +- && i < ARRAY_SIZE(ecc->layout->oobfree); i++) +- ecc->layout->oobavail += ecc->layout->oobfree[i].length; +- mtd->oobavail = ecc->layout->oobavail; +- +- /* ECC sanity check: warn if it's too weak */ +- if (!nand_ecc_strength_good(mtd)) +- pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n", +- mtd->name); ++ /* propagate ecc info to mtd_info */ ++ mtd->ecc_strength = ecc->strength; ++ mtd->ecc_step_size = ecc->size; + + /* + * Set the number of read / write steps for one page depending on ECC +@@ -4306,6 +4342,21 @@ int nand_scan_tail(struct mtd_info *mtd) + } + ecc->total = ecc->steps * ecc->bytes; + ++ /* ++ * The number of bytes available for a client to place data into ++ * the out of band area. ++ */ ++ ret = mtd_ooblayout_count_freebytes(mtd); ++ if (ret < 0) ++ ret = 0; ++ ++ mtd->oobavail = ret; ++ ++ /* ECC sanity check: warn if it's too weak */ ++ if (!nand_ecc_strength_good(mtd)) ++ pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n", ++ mtd->name); ++ + /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ + if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) { + switch (ecc->steps) { +@@ -4362,10 +4413,6 @@ int nand_scan_tail(struct mtd_info *mtd) + mtd->_block_markbad = nand_block_markbad; + mtd->writebufsize = mtd->writesize; + +- /* propagate ecc info to mtd_info */ +- mtd->ecclayout = ecc->layout; +- mtd->ecc_strength = ecc->strength; +- mtd->ecc_step_size = ecc->size; + /* + * Initialize bitflip_threshold to its default prior scan_bbt() call. + * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be +@@ -4421,7 +4468,7 @@ EXPORT_SYMBOL(nand_scan); + */ + void nand_release(struct mtd_info *mtd) + { +- struct nand_chip *chip = mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + if (chip->ecc.mode == NAND_ECC_SOFT_BCH) + nand_bch_free((struct nand_bch_control *)chip->ecc.priv); +--- a/drivers/mtd/nand/nand_bbt.c ++++ b/drivers/mtd/nand/nand_bbt.c +@@ -172,7 +172,7 @@ static int read_bbt(struct mtd_info *mtd + struct nand_bbt_descr *td, int offs) + { + int res, ret = 0, i, j, act = 0; +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + size_t retlen, len, totlen; + loff_t from; + int bits = td->options & NAND_BBT_NRBITS_MSK; +@@ -263,7 +263,7 @@ static int read_bbt(struct mtd_info *mtd + */ + static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + int res = 0, i; + + if (td->options & NAND_BBT_PERCHIP) { +@@ -388,7 +388,7 @@ static u32 bbt_get_ver_offs(struct mtd_i + static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf, + struct nand_bbt_descr *td, struct nand_bbt_descr *md) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + + /* Read the primary version, if available */ + if (td->options & NAND_BBT_VERSION) { +@@ -454,7 +454,7 @@ static int scan_block_fast(struct mtd_in + static int create_bbt(struct mtd_info *mtd, uint8_t *buf, + struct nand_bbt_descr *bd, int chip) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + int i, numblocks, numpages; + int startblock; + loff_t from; +@@ -523,7 +523,7 @@ static int create_bbt(struct mtd_info *m + */ + static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + int i, chips; + int startblock, block, dir; + int scanlen = mtd->writesize + mtd->oobsize; +@@ -618,7 +618,7 @@ static int write_bbt(struct mtd_info *mt + struct nand_bbt_descr *td, struct nand_bbt_descr *md, + int chipsel) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + struct erase_info einfo; + int i, res, chip = 0; + int bits, startblock, dir, page, offs, numblocks, sft, sftmsk; +@@ -819,7 +819,7 @@ static int write_bbt(struct mtd_info *mt + */ + static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + + return create_bbt(mtd, this->buffers->databuf, bd, -1); + } +@@ -838,7 +838,7 @@ static inline int nand_memory_bbt(struct + static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd) + { + int i, chips, writeops, create, chipsel, res, res2; +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + struct nand_bbt_descr *td = this->bbt_td; + struct nand_bbt_descr *md = this->bbt_md; + struct nand_bbt_descr *rd, *rd2; +@@ -962,7 +962,7 @@ static int check_create(struct mtd_info + */ + static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + int i, j, chips, block, nrblocks, update; + uint8_t oldval; + +@@ -1022,7 +1022,7 @@ static void mark_bbt_region(struct mtd_i + */ + static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + u32 pattern_len; + u32 bits; + u32 table_size; +@@ -1074,7 +1074,7 @@ static void verify_bbt_descr(struct mtd_ + */ + static int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + int len, res; + uint8_t *buf; + struct nand_bbt_descr *td = this->bbt_td; +@@ -1147,7 +1147,7 @@ err: + */ + static int nand_update_bbt(struct mtd_info *mtd, loff_t offs) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + int len, res = 0; + int chip, chipsel; + uint8_t *buf; +@@ -1281,7 +1281,7 @@ static int nand_create_badblock_pattern( + */ + int nand_default_bbt(struct mtd_info *mtd) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + int ret; + + /* Is a flash based bad block table requested? */ +@@ -1317,7 +1317,7 @@ int nand_default_bbt(struct mtd_info *mt + */ + int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + int block; + + block = (int)(offs >> this->bbt_erase_shift); +@@ -1332,7 +1332,7 @@ int nand_isreserved_bbt(struct mtd_info + */ + int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + int block, res; + + block = (int)(offs >> this->bbt_erase_shift); +@@ -1359,7 +1359,7 @@ int nand_isbad_bbt(struct mtd_info *mtd, + */ + int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs) + { +- struct nand_chip *this = mtd->priv; ++ struct nand_chip *this = mtd_to_nand(mtd); + int block, ret = 0; + + block = (int)(offs >> this->bbt_erase_shift); +@@ -1373,5 +1373,3 @@ int nand_markbad_bbt(struct mtd_info *mt + + return ret; + } +- +-EXPORT_SYMBOL(nand_scan_bbt); +--- a/drivers/mtd/nand/nand_bch.c ++++ b/drivers/mtd/nand/nand_bch.c +@@ -32,13 +32,11 @@ + /** + * struct nand_bch_control - private NAND BCH control structure + * @bch: BCH control structure +- * @ecclayout: private ecc layout for this BCH configuration + * @errloc: error location array + * @eccmask: XOR ecc mask, allows erased pages to be decoded as valid + */ + struct nand_bch_control { + struct bch_control *bch; +- struct nand_ecclayout ecclayout; + unsigned int *errloc; + unsigned char *eccmask; + }; +@@ -52,7 +50,7 @@ struct nand_bch_control { + int nand_bch_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf, + unsigned char *code) + { +- const struct nand_chip *chip = mtd->priv; ++ const struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_bch_control *nbc = chip->ecc.priv; + unsigned int i; + +@@ -79,7 +77,7 @@ EXPORT_SYMBOL(nand_bch_calculate_ecc); + int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc) + { +- const struct nand_chip *chip = mtd->priv; ++ const struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_bch_control *nbc = chip->ecc.priv; + unsigned int *errloc = nbc->errloc; + int i, count; +@@ -98,7 +96,7 @@ int nand_bch_correct_data(struct mtd_inf + } + } else if (count < 0) { + printk(KERN_ERR "ecc unrecoverable error\n"); +- count = -1; ++ count = -EBADMSG; + } + return count; + } +@@ -107,9 +105,6 @@ EXPORT_SYMBOL(nand_bch_correct_data); + /** + * nand_bch_init - [NAND Interface] Initialize NAND BCH error correction + * @mtd: MTD block structure +- * @eccsize: ecc block size in bytes +- * @eccbytes: ecc length in bytes +- * @ecclayout: output default layout + * + * Returns: + * a pointer to a new NAND BCH control structure, or NULL upon failure +@@ -123,14 +118,20 @@ EXPORT_SYMBOL(nand_bch_correct_data); + * @eccsize = 512 (thus, m=13 is the smallest integer such that 2^m-1 > 512*8) + * @eccbytes = 7 (7 bytes are required to store m*t = 13*4 = 52 bits) + */ +-struct nand_bch_control * +-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, unsigned int eccbytes, +- struct nand_ecclayout **ecclayout) ++struct nand_bch_control *nand_bch_init(struct mtd_info *mtd) + { ++ struct nand_chip *nand = mtd_to_nand(mtd); + unsigned int m, t, eccsteps, i; +- struct nand_ecclayout *layout; + struct nand_bch_control *nbc = NULL; + unsigned char *erased_page; ++ unsigned int eccsize = nand->ecc.size; ++ unsigned int eccbytes = nand->ecc.bytes; ++ unsigned int eccstrength = nand->ecc.strength; ++ ++ if (!eccbytes && eccstrength) { ++ eccbytes = DIV_ROUND_UP(eccstrength * fls(8 * eccsize), 8); ++ nand->ecc.bytes = eccbytes; ++ } + + if (!eccsize || !eccbytes) { + printk(KERN_WARNING "ecc parameters not supplied\n"); +@@ -158,7 +159,7 @@ nand_bch_init(struct mtd_info *mtd, unsi + eccsteps = mtd->writesize/eccsize; + + /* if no ecc placement scheme was provided, build one */ +- if (!*ecclayout) { ++ if (!mtd->ooblayout) { + + /* handle large page devices only */ + if (mtd->oobsize < 64) { +@@ -167,24 +168,7 @@ nand_bch_init(struct mtd_info *mtd, unsi + goto fail; + } + +- layout = &nbc->ecclayout; +- layout->eccbytes = eccsteps*eccbytes; +- +- /* reserve 2 bytes for bad block marker */ +- if (layout->eccbytes+2 > mtd->oobsize) { +- printk(KERN_WARNING "no suitable oob scheme available " +- "for oobsize %d eccbytes %u\n", mtd->oobsize, +- eccbytes); +- goto fail; +- } +- /* put ecc bytes at oob tail */ +- for (i = 0; i < layout->eccbytes; i++) +- layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i; +- +- layout->oobfree[0].offset = 2; +- layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes; +- +- *ecclayout = layout; ++ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); + } + + /* sanity checks */ +@@ -192,7 +176,8 @@ nand_bch_init(struct mtd_info *mtd, unsi + printk(KERN_WARNING "eccsize %u is too large\n", eccsize); + goto fail; + } +- if ((*ecclayout)->eccbytes != (eccsteps*eccbytes)) { ++ ++ if (mtd_ooblayout_count_eccbytes(mtd) != (eccsteps*eccbytes)) { + printk(KERN_WARNING "invalid ecc layout\n"); + goto fail; + } +@@ -216,6 +201,9 @@ nand_bch_init(struct mtd_info *mtd, unsi + for (i = 0; i < eccbytes; i++) + nbc->eccmask[i] ^= 0xff; + ++ if (!eccstrength) ++ nand->ecc.strength = (eccbytes * 8) / fls(8 * eccsize); ++ + return nbc; + fail: + nand_bch_free(nbc); +--- a/drivers/mtd/nand/nand_ecc.c ++++ b/drivers/mtd/nand/nand_ecc.c +@@ -424,7 +424,7 @@ int nand_calculate_ecc(struct mtd_info * + unsigned char *code) + { + __nand_calculate_ecc(buf, +- ((struct nand_chip *)mtd->priv)->ecc.size, code); ++ mtd_to_nand(mtd)->ecc.size, code); + + return 0; + } +@@ -524,7 +524,7 @@ int nand_correct_data(struct mtd_info *m + unsigned char *read_ecc, unsigned char *calc_ecc) + { + return __nand_correct_data(buf, read_ecc, calc_ecc, +- ((struct nand_chip *)mtd->priv)->ecc.size); ++ mtd_to_nand(mtd)->ecc.size); + } + EXPORT_SYMBOL(nand_correct_data); + +--- a/drivers/mtd/nand/nand_ids.c ++++ b/drivers/mtd/nand/nand_ids.c +@@ -50,8 +50,8 @@ struct nand_flash_dev nand_flash_ids[] = + SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) }, + {"H27UCG8T2ATR-BC 64G 3.3V 8-bit", + { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, +- SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K), +- 4 }, ++ SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, ++ NAND_ECC_INFO(40, SZ_1K), 4 }, + + LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS), +--- a/drivers/mtd/nand/nandsim.c ++++ b/drivers/mtd/nand/nandsim.c +@@ -666,8 +666,8 @@ static char *get_partition_name(int i) + */ + static int init_nandsim(struct mtd_info *mtd) + { +- struct nand_chip *chip = mtd->priv; +- struct nandsim *ns = chip->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); ++ struct nandsim *ns = nand_get_controller_data(chip); + int i, ret = 0; + uint64_t remains; + uint64_t next_offset; +@@ -1908,7 +1908,8 @@ static void switch_state(struct nandsim + + static u_char ns_nand_read_byte(struct mtd_info *mtd) + { +- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); ++ struct nandsim *ns = nand_get_controller_data(chip); + u_char outb = 0x00; + + /* Sanity and correctness checks */ +@@ -1969,7 +1970,8 @@ static u_char ns_nand_read_byte(struct m + + static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte) + { +- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); ++ struct nandsim *ns = nand_get_controller_data(chip); + + /* Sanity and correctness checks */ + if (!ns->lines.ce) { +@@ -2123,7 +2125,8 @@ static void ns_nand_write_byte(struct mt + + static void ns_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int bitmask) + { +- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); ++ struct nandsim *ns = nand_get_controller_data(chip); + + ns->lines.cle = bitmask & NAND_CLE ? 1 : 0; + ns->lines.ale = bitmask & NAND_ALE ? 1 : 0; +@@ -2141,7 +2144,7 @@ static int ns_device_ready(struct mtd_in + + static uint16_t ns_nand_read_word(struct mtd_info *mtd) + { +- struct nand_chip *chip = (struct nand_chip *)mtd->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); + + NS_DBG("read_word\n"); + +@@ -2150,7 +2153,8 @@ static uint16_t ns_nand_read_word(struct + + static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) + { +- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); ++ struct nandsim *ns = nand_get_controller_data(chip); + + /* Check that chip is expecting data input */ + if (!(ns->state & STATE_DATAIN_MASK)) { +@@ -2177,7 +2181,8 @@ static void ns_nand_write_buf(struct mtd + + static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) + { +- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; ++ struct nand_chip *chip = mtd_to_nand(mtd); ++ struct nandsim *ns = nand_get_controller_data(chip); + + /* Sanity and correctness checks */ + if (!ns->lines.ce) { +@@ -2198,7 +2203,7 @@ static void ns_nand_read_buf(struct mtd_ + int i; + + for (i = 0; i < len; i++) +- buf[i] = ((struct nand_chip *)mtd->priv)->read_byte(mtd); ++ buf[i] = mtd_to_nand(mtd)->read_byte(mtd); + + return; + } +@@ -2236,16 +2241,15 @@ static int __init ns_init_module(void) + } + + /* Allocate and initialize mtd_info, nand_chip and nandsim structures */ +- nsmtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip) +- + sizeof(struct nandsim), GFP_KERNEL); +- if (!nsmtd) { ++ chip = kzalloc(sizeof(struct nand_chip) + sizeof(struct nandsim), ++ GFP_KERNEL); ++ if (!chip) { + NS_ERR("unable to allocate core structures.\n"); + return -ENOMEM; + } +- chip = (struct nand_chip *)(nsmtd + 1); +- nsmtd->priv = (void *)chip; ++ nsmtd = nand_to_mtd(chip); + nand = (struct nandsim *)(chip + 1); +- chip->priv = (void *)nand; ++ nand_set_controller_data(chip, (void *)nand); + + /* + * Register simulator's callbacks. +@@ -2257,6 +2261,7 @@ static int __init ns_init_module(void) + chip->read_buf = ns_nand_read_buf; + chip->read_word = ns_nand_read_word; + chip->ecc.mode = NAND_ECC_SOFT; ++ chip->ecc.algo = NAND_ECC_HAMMING; + /* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */ + /* and 'badblocks' parameters to work */ + chip->options |= NAND_SKIP_BBTSCAN; +@@ -2335,6 +2340,7 @@ static int __init ns_init_module(void) + goto error; + } + chip->ecc.mode = NAND_ECC_SOFT_BCH; ++ chip->ecc.algo = NAND_ECC_BCH; + chip->ecc.size = 512; + chip->ecc.strength = bch; + chip->ecc.bytes = eccbytes; +@@ -2392,7 +2398,7 @@ err_exit: + for (i = 0;i < ARRAY_SIZE(nand->partitions); ++i) + kfree(nand->partitions[i].name); + error: +- kfree(nsmtd); ++ kfree(chip); + free_lists(); + + return retval; +@@ -2405,7 +2411,8 @@ module_init(ns_init_module); + */ + static void __exit ns_cleanup_module(void) + { +- struct nandsim *ns = ((struct nand_chip *)nsmtd->priv)->priv; ++ struct nand_chip *chip = mtd_to_nand(nsmtd); ++ struct nandsim *ns = nand_get_controller_data(chip); + int i; + + nandsim_debugfs_remove(ns); +@@ -2413,7 +2420,7 @@ static void __exit ns_cleanup_module(voi + nand_release(nsmtd); /* Unregister driver */ + for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i) + kfree(ns->partitions[i].name); +- kfree(nsmtd); /* Free other structures */ ++ kfree(mtd_to_nand(nsmtd)); /* Free other structures */ + free_lists(); + } + +--- a/drivers/mtd/ofpart.c ++++ b/drivers/mtd/ofpart.c +@@ -26,9 +26,10 @@ static bool node_has_compatible(struct d + } + + static int parse_ofpart_partitions(struct mtd_info *master, +- struct mtd_partition **pparts, ++ const struct mtd_partition **pparts, + struct mtd_part_parser_data *data) + { ++ struct mtd_partition *parts; + struct device_node *mtd_node; + struct device_node *ofpart_node; + const char *partname; +@@ -37,10 +38,8 @@ static int parse_ofpart_partitions(struc + bool dedicated = true; + + +- if (!data) +- return 0; +- +- mtd_node = data->of_node; ++ /* Pull of_node from the master device node */ ++ mtd_node = mtd_get_of_node(master); + if (!mtd_node) + return 0; + +@@ -72,8 +71,8 @@ static int parse_ofpart_partitions(struc + if (nr_parts == 0) + return 0; + +- *pparts = kzalloc(nr_parts * sizeof(**pparts), GFP_KERNEL); +- if (!*pparts) ++ parts = kzalloc(nr_parts * sizeof(*parts), GFP_KERNEL); ++ if (!parts) + return -ENOMEM; + + i = 0; +@@ -107,19 +106,19 @@ static int parse_ofpart_partitions(struc + goto ofpart_fail; + } + +- (*pparts)[i].offset = of_read_number(reg, a_cells); +- (*pparts)[i].size = of_read_number(reg + a_cells, s_cells); ++ parts[i].offset = of_read_number(reg, a_cells); ++ parts[i].size = of_read_number(reg + a_cells, s_cells); + + partname = of_get_property(pp, "label", &len); + if (!partname) + partname = of_get_property(pp, "name", &len); +- (*pparts)[i].name = partname; ++ parts[i].name = partname; + + if (of_get_property(pp, "read-only", &len)) +- (*pparts)[i].mask_flags |= MTD_WRITEABLE; ++ parts[i].mask_flags |= MTD_WRITEABLE; + + if (of_get_property(pp, "lock", &len)) +- (*pparts)[i].mask_flags |= MTD_POWERUP_LOCK; ++ parts[i].mask_flags |= MTD_POWERUP_LOCK; + + i++; + } +@@ -127,6 +126,7 @@ static int parse_ofpart_partitions(struc + if (!nr_parts) + goto ofpart_none; + ++ *pparts = parts; + return nr_parts; + + ofpart_fail: +@@ -135,21 +135,20 @@ ofpart_fail: + ret = -EINVAL; + ofpart_none: + of_node_put(pp); +- kfree(*pparts); +- *pparts = NULL; ++ kfree(parts); + return ret; + } + + static struct mtd_part_parser ofpart_parser = { +- .owner = THIS_MODULE, + .parse_fn = parse_ofpart_partitions, + .name = "ofpart", + }; + + static int parse_ofoldpart_partitions(struct mtd_info *master, +- struct mtd_partition **pparts, ++ const struct mtd_partition **pparts, + struct mtd_part_parser_data *data) + { ++ struct mtd_partition *parts; + struct device_node *dp; + int i, plen, nr_parts; + const struct { +@@ -157,10 +156,8 @@ static int parse_ofoldpart_partitions(st + } *part; + const char *names; + +- if (!data) +- return 0; +- +- dp = data->of_node; ++ /* Pull of_node from the master device node */ ++ dp = mtd_get_of_node(master); + if (!dp) + return 0; + +@@ -173,37 +170,37 @@ static int parse_ofoldpart_partitions(st + + nr_parts = plen / sizeof(part[0]); + +- *pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL); +- if (!*pparts) ++ parts = kzalloc(nr_parts * sizeof(*parts), GFP_KERNEL); ++ if (!parts) + return -ENOMEM; + + names = of_get_property(dp, "partition-names", &plen); + + for (i = 0; i < nr_parts; i++) { +- (*pparts)[i].offset = be32_to_cpu(part->offset); +- (*pparts)[i].size = be32_to_cpu(part->len) & ~1; ++ parts[i].offset = be32_to_cpu(part->offset); ++ parts[i].size = be32_to_cpu(part->len) & ~1; + /* bit 0 set signifies read only partition */ + if (be32_to_cpu(part->len) & 1) +- (*pparts)[i].mask_flags = MTD_WRITEABLE; ++ parts[i].mask_flags = MTD_WRITEABLE; + + if (names && (plen > 0)) { + int len = strlen(names) + 1; + +- (*pparts)[i].name = names; ++ parts[i].name = names; + plen -= len; + names += len; + } else { +- (*pparts)[i].name = "unnamed"; ++ parts[i].name = "unnamed"; + } + + part++; + } + ++ *pparts = parts; + return nr_parts; + } + + static struct mtd_part_parser ofoldpart_parser = { +- .owner = THIS_MODULE, + .parse_fn = parse_ofoldpart_partitions, + .name = "ofoldpart", + }; +--- a/drivers/mtd/spi-nor/Kconfig ++++ b/drivers/mtd/spi-nor/Kconfig +@@ -7,6 +7,14 @@ menuconfig MTD_SPI_NOR + + if MTD_SPI_NOR + ++config MTD_MT81xx_NOR ++ tristate "Mediatek MT81xx SPI NOR flash controller" ++ depends on HAS_IOMEM ++ help ++ This enables access to SPI NOR flash, using MT81xx SPI NOR flash ++ controller. This controller does not support generic SPI BUS, it only ++ supports SPI NOR Flash. ++ + config MTD_SPI_NOR_USE_4K_SECTORS + bool "Use small 4096 B erase sectors" + default y +@@ -23,7 +31,7 @@ config MTD_SPI_NOR_USE_4K_SECTORS + + config SPI_FSL_QUADSPI + tristate "Freescale Quad SPI controller" +- depends on ARCH_MXC || COMPILE_TEST ++ depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST + depends on HAS_IOMEM + help + This enables support for the Quad SPI controller in master mode. +--- a/drivers/mtd/spi-nor/Makefile ++++ b/drivers/mtd/spi-nor/Makefile +@@ -1,3 +1,4 @@ + obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o + obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o ++obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o + obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o +--- /dev/null ++++ b/drivers/mtd/spi-nor/mtk-quadspi.c +@@ -0,0 +1,485 @@ ++/* ++ * Copyright (c) 2015 MediaTek Inc. ++ * Author: Bayi Cheng ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define MTK_NOR_CMD_REG 0x00 ++#define MTK_NOR_CNT_REG 0x04 ++#define MTK_NOR_RDSR_REG 0x08 ++#define MTK_NOR_RDATA_REG 0x0c ++#define MTK_NOR_RADR0_REG 0x10 ++#define MTK_NOR_RADR1_REG 0x14 ++#define MTK_NOR_RADR2_REG 0x18 ++#define MTK_NOR_WDATA_REG 0x1c ++#define MTK_NOR_PRGDATA0_REG 0x20 ++#define MTK_NOR_PRGDATA1_REG 0x24 ++#define MTK_NOR_PRGDATA2_REG 0x28 ++#define MTK_NOR_PRGDATA3_REG 0x2c ++#define MTK_NOR_PRGDATA4_REG 0x30 ++#define MTK_NOR_PRGDATA5_REG 0x34 ++#define MTK_NOR_SHREG0_REG 0x38 ++#define MTK_NOR_SHREG1_REG 0x3c ++#define MTK_NOR_SHREG2_REG 0x40 ++#define MTK_NOR_SHREG3_REG 0x44 ++#define MTK_NOR_SHREG4_REG 0x48 ++#define MTK_NOR_SHREG5_REG 0x4c ++#define MTK_NOR_SHREG6_REG 0x50 ++#define MTK_NOR_SHREG7_REG 0x54 ++#define MTK_NOR_SHREG8_REG 0x58 ++#define MTK_NOR_SHREG9_REG 0x5c ++#define MTK_NOR_CFG1_REG 0x60 ++#define MTK_NOR_CFG2_REG 0x64 ++#define MTK_NOR_CFG3_REG 0x68 ++#define MTK_NOR_STATUS0_REG 0x70 ++#define MTK_NOR_STATUS1_REG 0x74 ++#define MTK_NOR_STATUS2_REG 0x78 ++#define MTK_NOR_STATUS3_REG 0x7c ++#define MTK_NOR_FLHCFG_REG 0x84 ++#define MTK_NOR_TIME_REG 0x94 ++#define MTK_NOR_PP_DATA_REG 0x98 ++#define MTK_NOR_PREBUF_STUS_REG 0x9c ++#define MTK_NOR_DELSEL0_REG 0xa0 ++#define MTK_NOR_DELSEL1_REG 0xa4 ++#define MTK_NOR_INTRSTUS_REG 0xa8 ++#define MTK_NOR_INTREN_REG 0xac ++#define MTK_NOR_CHKSUM_CTL_REG 0xb8 ++#define MTK_NOR_CHKSUM_REG 0xbc ++#define MTK_NOR_CMD2_REG 0xc0 ++#define MTK_NOR_WRPROT_REG 0xc4 ++#define MTK_NOR_RADR3_REG 0xc8 ++#define MTK_NOR_DUAL_REG 0xcc ++#define MTK_NOR_DELSEL2_REG 0xd0 ++#define MTK_NOR_DELSEL3_REG 0xd4 ++#define MTK_NOR_DELSEL4_REG 0xd8 ++ ++/* commands for mtk nor controller */ ++#define MTK_NOR_READ_CMD 0x0 ++#define MTK_NOR_RDSR_CMD 0x2 ++#define MTK_NOR_PRG_CMD 0x4 ++#define MTK_NOR_WR_CMD 0x10 ++#define MTK_NOR_PIO_WR_CMD 0x90 ++#define MTK_NOR_WRSR_CMD 0x20 ++#define MTK_NOR_PIO_READ_CMD 0x81 ++#define MTK_NOR_WR_BUF_ENABLE 0x1 ++#define MTK_NOR_WR_BUF_DISABLE 0x0 ++#define MTK_NOR_ENABLE_SF_CMD 0x30 ++#define MTK_NOR_DUAD_ADDR_EN 0x8 ++#define MTK_NOR_QUAD_READ_EN 0x4 ++#define MTK_NOR_DUAL_ADDR_EN 0x2 ++#define MTK_NOR_DUAL_READ_EN 0x1 ++#define MTK_NOR_DUAL_DISABLE 0x0 ++#define MTK_NOR_FAST_READ 0x1 ++ ++#define SFLASH_WRBUF_SIZE 128 ++ ++/* Can shift up to 48 bits (6 bytes) of TX/RX */ ++#define MTK_NOR_MAX_RX_TX_SHIFT 6 ++/* can shift up to 56 bits (7 bytes) transfer by MTK_NOR_PRG_CMD */ ++#define MTK_NOR_MAX_SHIFT 7 ++ ++/* Helpers for accessing the program data / shift data registers */ ++#define MTK_NOR_PRG_REG(n) (MTK_NOR_PRGDATA0_REG + 4 * (n)) ++#define MTK_NOR_SHREG(n) (MTK_NOR_SHREG0_REG + 4 * (n)) ++ ++struct mt8173_nor { ++ struct spi_nor nor; ++ struct device *dev; ++ void __iomem *base; /* nor flash base address */ ++ struct clk *spi_clk; ++ struct clk *nor_clk; ++}; ++ ++static void mt8173_nor_set_read_mode(struct mt8173_nor *mt8173_nor) ++{ ++ struct spi_nor *nor = &mt8173_nor->nor; ++ ++ switch (nor->flash_read) { ++ case SPI_NOR_FAST: ++ writeb(nor->read_opcode, mt8173_nor->base + ++ MTK_NOR_PRGDATA3_REG); ++ writeb(MTK_NOR_FAST_READ, mt8173_nor->base + ++ MTK_NOR_CFG1_REG); ++ break; ++ case SPI_NOR_DUAL: ++ writeb(nor->read_opcode, mt8173_nor->base + ++ MTK_NOR_PRGDATA3_REG); ++ writeb(MTK_NOR_DUAL_READ_EN, mt8173_nor->base + ++ MTK_NOR_DUAL_REG); ++ break; ++ case SPI_NOR_QUAD: ++ writeb(nor->read_opcode, mt8173_nor->base + ++ MTK_NOR_PRGDATA4_REG); ++ writeb(MTK_NOR_QUAD_READ_EN, mt8173_nor->base + ++ MTK_NOR_DUAL_REG); ++ break; ++ default: ++ writeb(MTK_NOR_DUAL_DISABLE, mt8173_nor->base + ++ MTK_NOR_DUAL_REG); ++ break; ++ } ++} ++ ++static int mt8173_nor_execute_cmd(struct mt8173_nor *mt8173_nor, u8 cmdval) ++{ ++ int reg; ++ u8 val = cmdval & 0x1f; ++ ++ writeb(cmdval, mt8173_nor->base + MTK_NOR_CMD_REG); ++ return readl_poll_timeout(mt8173_nor->base + MTK_NOR_CMD_REG, reg, ++ !(reg & val), 100, 10000); ++} ++ ++static int mt8173_nor_do_tx_rx(struct mt8173_nor *mt8173_nor, u8 op, ++ u8 *tx, int txlen, u8 *rx, int rxlen) ++{ ++ int len = 1 + txlen + rxlen; ++ int i, ret, idx; ++ ++ if (len > MTK_NOR_MAX_SHIFT) ++ return -EINVAL; ++ ++ writeb(len * 8, mt8173_nor->base + MTK_NOR_CNT_REG); ++ ++ /* start at PRGDATA5, go down to PRGDATA0 */ ++ idx = MTK_NOR_MAX_RX_TX_SHIFT - 1; ++ ++ /* opcode */ ++ writeb(op, mt8173_nor->base + MTK_NOR_PRG_REG(idx)); ++ idx--; ++ ++ /* program TX data */ ++ for (i = 0; i < txlen; i++, idx--) ++ writeb(tx[i], mt8173_nor->base + MTK_NOR_PRG_REG(idx)); ++ ++ /* clear out rest of TX registers */ ++ while (idx >= 0) { ++ writeb(0, mt8173_nor->base + MTK_NOR_PRG_REG(idx)); ++ idx--; ++ } ++ ++ ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PRG_CMD); ++ if (ret) ++ return ret; ++ ++ /* restart at first RX byte */ ++ idx = rxlen - 1; ++ ++ /* read out RX data */ ++ for (i = 0; i < rxlen; i++, idx--) ++ rx[i] = readb(mt8173_nor->base + MTK_NOR_SHREG(idx)); ++ ++ return 0; ++} ++ ++/* Do a WRSR (Write Status Register) command */ ++static int mt8173_nor_wr_sr(struct mt8173_nor *mt8173_nor, u8 sr) ++{ ++ writeb(sr, mt8173_nor->base + MTK_NOR_PRGDATA5_REG); ++ writeb(8, mt8173_nor->base + MTK_NOR_CNT_REG); ++ return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WRSR_CMD); ++} ++ ++static int mt8173_nor_write_buffer_enable(struct mt8173_nor *mt8173_nor) ++{ ++ u8 reg; ++ ++ /* the bit0 of MTK_NOR_CFG2_REG is pre-fetch buffer ++ * 0: pre-fetch buffer use for read ++ * 1: pre-fetch buffer use for page program ++ */ ++ writel(MTK_NOR_WR_BUF_ENABLE, mt8173_nor->base + MTK_NOR_CFG2_REG); ++ return readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg, ++ 0x01 == (reg & 0x01), 100, 10000); ++} ++ ++static int mt8173_nor_write_buffer_disable(struct mt8173_nor *mt8173_nor) ++{ ++ u8 reg; ++ ++ writel(MTK_NOR_WR_BUF_DISABLE, mt8173_nor->base + MTK_NOR_CFG2_REG); ++ return readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg, ++ MTK_NOR_WR_BUF_DISABLE == (reg & 0x1), 100, ++ 10000); ++} ++ ++static void mt8173_nor_set_addr(struct mt8173_nor *mt8173_nor, u32 addr) ++{ ++ int i; ++ ++ for (i = 0; i < 3; i++) { ++ writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR0_REG + i * 4); ++ addr >>= 8; ++ } ++ /* Last register is non-contiguous */ ++ writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR3_REG); ++} ++ ++static int mt8173_nor_read(struct spi_nor *nor, loff_t from, size_t length, ++ size_t *retlen, u_char *buffer) ++{ ++ int i, ret; ++ int addr = (int)from; ++ u8 *buf = (u8 *)buffer; ++ struct mt8173_nor *mt8173_nor = nor->priv; ++ ++ /* set mode for fast read mode ,dual mode or quad mode */ ++ mt8173_nor_set_read_mode(mt8173_nor); ++ mt8173_nor_set_addr(mt8173_nor, addr); ++ ++ for (i = 0; i < length; i++, (*retlen)++) { ++ ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_READ_CMD); ++ if (ret < 0) ++ return ret; ++ buf[i] = readb(mt8173_nor->base + MTK_NOR_RDATA_REG); ++ } ++ return 0; ++} ++ ++static int mt8173_nor_write_single_byte(struct mt8173_nor *mt8173_nor, ++ int addr, int length, u8 *data) ++{ ++ int i, ret; ++ ++ mt8173_nor_set_addr(mt8173_nor, addr); ++ ++ for (i = 0; i < length; i++) { ++ writeb(*data++, mt8173_nor->base + MTK_NOR_WDATA_REG); ++ ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_WR_CMD); ++ if (ret < 0) ++ return ret; ++ } ++ return 0; ++} ++ ++static int mt8173_nor_write_buffer(struct mt8173_nor *mt8173_nor, int addr, ++ const u8 *buf) ++{ ++ int i, bufidx, data; ++ ++ mt8173_nor_set_addr(mt8173_nor, addr); ++ ++ bufidx = 0; ++ for (i = 0; i < SFLASH_WRBUF_SIZE; i += 4) { ++ data = buf[bufidx + 3]<<24 | buf[bufidx + 2]<<16 | ++ buf[bufidx + 1]<<8 | buf[bufidx]; ++ bufidx += 4; ++ writel(data, mt8173_nor->base + MTK_NOR_PP_DATA_REG); ++ } ++ return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WR_CMD); ++} ++ ++static void mt8173_nor_write(struct spi_nor *nor, loff_t to, size_t len, ++ size_t *retlen, const u_char *buf) ++{ ++ int ret; ++ struct mt8173_nor *mt8173_nor = nor->priv; ++ ++ ret = mt8173_nor_write_buffer_enable(mt8173_nor); ++ if (ret < 0) ++ dev_warn(mt8173_nor->dev, "write buffer enable failed!\n"); ++ ++ while (len >= SFLASH_WRBUF_SIZE) { ++ ret = mt8173_nor_write_buffer(mt8173_nor, to, buf); ++ if (ret < 0) ++ dev_err(mt8173_nor->dev, "write buffer failed!\n"); ++ len -= SFLASH_WRBUF_SIZE; ++ to += SFLASH_WRBUF_SIZE; ++ buf += SFLASH_WRBUF_SIZE; ++ (*retlen) += SFLASH_WRBUF_SIZE; ++ } ++ ret = mt8173_nor_write_buffer_disable(mt8173_nor); ++ if (ret < 0) ++ dev_warn(mt8173_nor->dev, "write buffer disable failed!\n"); ++ ++ if (len) { ++ ret = mt8173_nor_write_single_byte(mt8173_nor, to, (int)len, ++ (u8 *)buf); ++ if (ret < 0) ++ dev_err(mt8173_nor->dev, "write single byte failed!\n"); ++ (*retlen) += len; ++ } ++} ++ ++static int mt8173_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) ++{ ++ int ret; ++ struct mt8173_nor *mt8173_nor = nor->priv; ++ ++ switch (opcode) { ++ case SPINOR_OP_RDSR: ++ ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_RDSR_CMD); ++ if (ret < 0) ++ return ret; ++ if (len == 1) ++ *buf = readb(mt8173_nor->base + MTK_NOR_RDSR_REG); ++ else ++ dev_err(mt8173_nor->dev, "len should be 1 for read status!\n"); ++ break; ++ default: ++ ret = mt8173_nor_do_tx_rx(mt8173_nor, opcode, NULL, 0, buf, len); ++ break; ++ } ++ return ret; ++} ++ ++static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, ++ int len) ++{ ++ int ret; ++ struct mt8173_nor *mt8173_nor = nor->priv; ++ ++ switch (opcode) { ++ case SPINOR_OP_WRSR: ++ /* We only handle 1 byte */ ++ ret = mt8173_nor_wr_sr(mt8173_nor, *buf); ++ break; ++ default: ++ ret = mt8173_nor_do_tx_rx(mt8173_nor, opcode, buf, len, NULL, 0); ++ if (ret) ++ dev_warn(mt8173_nor->dev, "write reg failure!\n"); ++ break; ++ } ++ return ret; ++} ++ ++static int mtk_nor_init(struct mt8173_nor *mt8173_nor, ++ struct device_node *flash_node) ++{ ++ int ret; ++ struct spi_nor *nor; ++ ++ /* initialize controller to accept commands */ ++ writel(MTK_NOR_ENABLE_SF_CMD, mt8173_nor->base + MTK_NOR_WRPROT_REG); ++ ++ nor = &mt8173_nor->nor; ++ nor->dev = mt8173_nor->dev; ++ nor->priv = mt8173_nor; ++ spi_nor_set_flash_node(nor, flash_node); ++ ++ /* fill the hooks to spi nor */ ++ nor->read = mt8173_nor_read; ++ nor->read_reg = mt8173_nor_read_reg; ++ nor->write = mt8173_nor_write; ++ nor->write_reg = mt8173_nor_write_reg; ++ nor->mtd.name = "mtk_nor"; ++ /* initialized with NULL */ ++ ret = spi_nor_scan(nor, NULL, SPI_NOR_DUAL); ++ if (ret) ++ return ret; ++ ++ return mtd_device_register(&nor->mtd, NULL, 0); ++} ++ ++static int mtk_nor_drv_probe(struct platform_device *pdev) ++{ ++ struct device_node *flash_np; ++ struct resource *res; ++ int ret; ++ struct mt8173_nor *mt8173_nor; ++ ++ if (!pdev->dev.of_node) { ++ dev_err(&pdev->dev, "No DT found\n"); ++ return -EINVAL; ++ } ++ ++ mt8173_nor = devm_kzalloc(&pdev->dev, sizeof(*mt8173_nor), GFP_KERNEL); ++ if (!mt8173_nor) ++ return -ENOMEM; ++ platform_set_drvdata(pdev, mt8173_nor); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ mt8173_nor->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(mt8173_nor->base)) ++ return PTR_ERR(mt8173_nor->base); ++ ++ mt8173_nor->spi_clk = devm_clk_get(&pdev->dev, "spi"); ++ if (IS_ERR(mt8173_nor->spi_clk)) ++ return PTR_ERR(mt8173_nor->spi_clk); ++ ++ mt8173_nor->nor_clk = devm_clk_get(&pdev->dev, "sf"); ++ if (IS_ERR(mt8173_nor->nor_clk)) ++ return PTR_ERR(mt8173_nor->nor_clk); ++ ++ mt8173_nor->dev = &pdev->dev; ++ ret = clk_prepare_enable(mt8173_nor->spi_clk); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(mt8173_nor->nor_clk); ++ if (ret) { ++ clk_disable_unprepare(mt8173_nor->spi_clk); ++ return ret; ++ } ++ /* only support one attached flash */ ++ flash_np = of_get_next_available_child(pdev->dev.of_node, NULL); ++ if (!flash_np) { ++ dev_err(&pdev->dev, "no SPI flash device to configure\n"); ++ ret = -ENODEV; ++ goto nor_free; ++ } ++ ret = mtk_nor_init(mt8173_nor, flash_np); ++ ++nor_free: ++ if (ret) { ++ clk_disable_unprepare(mt8173_nor->spi_clk); ++ clk_disable_unprepare(mt8173_nor->nor_clk); ++ } ++ return ret; ++} ++ ++static int mtk_nor_drv_remove(struct platform_device *pdev) ++{ ++ struct mt8173_nor *mt8173_nor = platform_get_drvdata(pdev); ++ ++ clk_disable_unprepare(mt8173_nor->spi_clk); ++ clk_disable_unprepare(mt8173_nor->nor_clk); ++ return 0; ++} ++ ++static const struct of_device_id mtk_nor_of_ids[] = { ++ { .compatible = "mediatek,mt8173-nor"}, ++ { /* sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, mtk_nor_of_ids); ++ ++static struct platform_driver mtk_nor_driver = { ++ .probe = mtk_nor_drv_probe, ++ .remove = mtk_nor_drv_remove, ++ .driver = { ++ .name = "mtk-nor", ++ .of_match_table = mtk_nor_of_ids, ++ }, ++}; ++ ++module_platform_driver(mtk_nor_driver); ++MODULE_LICENSE("GPL v2"); ++MODULE_DESCRIPTION("MediaTek SPI NOR Flash Driver"); +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -38,6 +38,7 @@ + #define CHIP_ERASE_2MB_READY_WAIT_JIFFIES (40UL * HZ) + + #define SPI_NOR_MAX_ID_LEN 6 ++#define SPI_NOR_MAX_ADDR_WIDTH 4 + + struct flash_info { + char *name; +@@ -60,14 +61,20 @@ struct flash_info { + u16 addr_width; + + u16 flags; +-#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */ +-#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */ +-#define SST_WRITE 0x04 /* use SST byte programming */ +-#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */ +-#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */ +-#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */ +-#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */ +-#define USE_FSR 0x80 /* use flag status register */ ++#define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */ ++#define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */ ++#define SST_WRITE BIT(2) /* use SST byte programming */ ++#define SPI_NOR_NO_FR BIT(3) /* Can't do fastread */ ++#define SECT_4K_PMC BIT(4) /* SPINOR_OP_BE_4K_PMC works uniformly */ ++#define SPI_NOR_DUAL_READ BIT(5) /* Flash supports Dual Read */ ++#define SPI_NOR_QUAD_READ BIT(6) /* Flash supports Quad Read */ ++#define USE_FSR BIT(7) /* use flag status register */ ++#define SPI_NOR_HAS_LOCK BIT(8) /* Flash supports lock/unlock via SR */ ++#define SPI_NOR_HAS_TB BIT(9) /* ++ * Flash SR has Top/Bottom (TB) protect ++ * bit. Must be used with ++ * SPI_NOR_HAS_LOCK. ++ */ + }; + + #define JEDEC_MFR(info) ((info)->id[0]) +@@ -313,6 +320,29 @@ static void spi_nor_unlock_and_unprep(st + } + + /* ++ * Initiate the erasure of a single sector ++ */ ++static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) ++{ ++ u8 buf[SPI_NOR_MAX_ADDR_WIDTH]; ++ int i; ++ ++ if (nor->erase) ++ return nor->erase(nor, addr); ++ ++ /* ++ * Default implementation, if driver doesn't have a specialized HW ++ * control ++ */ ++ for (i = nor->addr_width - 1; i >= 0; i--) { ++ buf[i] = addr & 0xff; ++ addr >>= 8; ++ } ++ ++ return nor->write_reg(nor, nor->erase_opcode, buf, nor->addr_width); ++} ++ ++/* + * Erase an address range on the nor chip. The address range may extend + * one or more erase sectors. Return an error is there is a problem erasing. + */ +@@ -371,10 +401,9 @@ static int spi_nor_erase(struct mtd_info + while (len) { + write_enable(nor); + +- if (nor->erase(nor, addr)) { +- ret = -EIO; ++ ret = spi_nor_erase_sector(nor, addr); ++ if (ret) + goto erase_err; +- } + + addr += mtd->erasesize; + len -= mtd->erasesize; +@@ -387,17 +416,13 @@ static int spi_nor_erase(struct mtd_info + + write_disable(nor); + ++erase_err: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE); + +- instr->state = MTD_ERASE_DONE; ++ instr->state = ret ? MTD_ERASE_FAILED : MTD_ERASE_DONE; + mtd_erase_callback(instr); + + return ret; +- +-erase_err: +- spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE); +- instr->state = MTD_ERASE_FAILED; +- return ret; + } + + static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs, +@@ -415,32 +440,58 @@ static void stm_get_locked_range(struct + } else { + pow = ((sr & mask) ^ mask) >> shift; + *len = mtd->size >> pow; +- *ofs = mtd->size - *len; ++ if (nor->flags & SNOR_F_HAS_SR_TB && sr & SR_TB) ++ *ofs = 0; ++ else ++ *ofs = mtd->size - *len; + } + } + + /* +- * Return 1 if the entire region is locked, 0 otherwise ++ * Return 1 if the entire region is locked (if @locked is true) or unlocked (if ++ * @locked is false); 0 otherwise + */ +-static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len, +- u8 sr) ++static int stm_check_lock_status_sr(struct spi_nor *nor, loff_t ofs, uint64_t len, ++ u8 sr, bool locked) + { + loff_t lock_offs; + uint64_t lock_len; + ++ if (!len) ++ return 1; ++ + stm_get_locked_range(nor, sr, &lock_offs, &lock_len); + +- return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs); ++ if (locked) ++ /* Requested range is a sub-range of locked range */ ++ return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs); ++ else ++ /* Requested range does not overlap with locked range */ ++ return (ofs >= lock_offs + lock_len) || (ofs + len <= lock_offs); ++} ++ ++static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len, ++ u8 sr) ++{ ++ return stm_check_lock_status_sr(nor, ofs, len, sr, true); ++} ++ ++static int stm_is_unlocked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len, ++ u8 sr) ++{ ++ return stm_check_lock_status_sr(nor, ofs, len, sr, false); + } + + /* + * Lock a region of the flash. Compatible with ST Micro and similar flash. +- * Supports only the block protection bits BP{0,1,2} in the status register ++ * Supports the block protection bits BP{0,1,2} in the status register + * (SR). Does not support these features found in newer SR bitfields: +- * - TB: top/bottom protect - only handle TB=0 (top protect) + * - SEC: sector/block protect - only handle SEC=0 (block protect) + * - CMP: complement protect - only support CMP=0 (range is not complemented) + * ++ * Support for the following is provided conditionally for some flash: ++ * - TB: top/bottom protect ++ * + * Sample table portion for 8MB flash (Winbond w25q64fw): + * + * SEC | TB | BP2 | BP1 | BP0 | Prot Length | Protected Portion +@@ -453,26 +504,55 @@ static int stm_is_locked_sr(struct spi_n + * 0 | 0 | 1 | 0 | 1 | 2 MB | Upper 1/4 + * 0 | 0 | 1 | 1 | 0 | 4 MB | Upper 1/2 + * X | X | 1 | 1 | 1 | 8 MB | ALL ++ * ------|-------|-------|-------|-------|---------------|------------------- ++ * 0 | 1 | 0 | 0 | 1 | 128 KB | Lower 1/64 ++ * 0 | 1 | 0 | 1 | 0 | 256 KB | Lower 1/32 ++ * 0 | 1 | 0 | 1 | 1 | 512 KB | Lower 1/16 ++ * 0 | 1 | 1 | 0 | 0 | 1 MB | Lower 1/8 ++ * 0 | 1 | 1 | 0 | 1 | 2 MB | Lower 1/4 ++ * 0 | 1 | 1 | 1 | 0 | 4 MB | Lower 1/2 + * + * Returns negative on errors, 0 on success. + */ + static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len) + { + struct mtd_info *mtd = &nor->mtd; +- u8 status_old, status_new; ++ int status_old, status_new; + u8 mask = SR_BP2 | SR_BP1 | SR_BP0; + u8 shift = ffs(mask) - 1, pow, val; ++ loff_t lock_len; ++ bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB; ++ bool use_top; ++ int ret; + + status_old = read_sr(nor); ++ if (status_old < 0) ++ return status_old; + +- /* SPI NOR always locks to the end */ +- if (ofs + len != mtd->size) { +- /* Does combined region extend to end? */ +- if (!stm_is_locked_sr(nor, ofs + len, mtd->size - ofs - len, +- status_old)) +- return -EINVAL; +- len = mtd->size - ofs; +- } ++ /* If nothing in our range is unlocked, we don't need to do anything */ ++ if (stm_is_locked_sr(nor, ofs, len, status_old)) ++ return 0; ++ ++ /* If anything below us is unlocked, we can't use 'bottom' protection */ ++ if (!stm_is_locked_sr(nor, 0, ofs, status_old)) ++ can_be_bottom = false; ++ ++ /* If anything above us is unlocked, we can't use 'top' protection */ ++ if (!stm_is_locked_sr(nor, ofs + len, mtd->size - (ofs + len), ++ status_old)) ++ can_be_top = false; ++ ++ if (!can_be_bottom && !can_be_top) ++ return -EINVAL; ++ ++ /* Prefer top, if both are valid */ ++ use_top = can_be_top; ++ ++ /* lock_len: length of region that should end up locked */ ++ if (use_top) ++ lock_len = mtd->size - ofs; ++ else ++ lock_len = ofs + len; + + /* + * Need smallest pow such that: +@@ -483,7 +563,7 @@ static int stm_lock(struct spi_nor *nor, + * + * pow = ceil(log2(size / len)) = log2(size) - floor(log2(len)) + */ +- pow = ilog2(mtd->size) - ilog2(len); ++ pow = ilog2(mtd->size) - ilog2(lock_len); + val = mask - (pow << shift); + if (val & ~mask) + return -EINVAL; +@@ -491,14 +571,27 @@ static int stm_lock(struct spi_nor *nor, + if (!(val & mask)) + return -EINVAL; + +- status_new = (status_old & ~mask) | val; ++ status_new = (status_old & ~mask & ~SR_TB) | val; ++ ++ /* Disallow further writes if WP pin is asserted */ ++ status_new |= SR_SRWD; ++ ++ if (!use_top) ++ status_new |= SR_TB; ++ ++ /* Don't bother if they're the same */ ++ if (status_new == status_old) ++ return 0; + + /* Only modify protection if it will not unlock other areas */ +- if ((status_new & mask) <= (status_old & mask)) ++ if ((status_new & mask) < (status_old & mask)) + return -EINVAL; + + write_enable(nor); +- return write_sr(nor, status_new); ++ ret = write_sr(nor, status_new); ++ if (ret) ++ return ret; ++ return spi_nor_wait_till_ready(nor); + } + + /* +@@ -509,17 +602,43 @@ static int stm_lock(struct spi_nor *nor, + static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len) + { + struct mtd_info *mtd = &nor->mtd; +- uint8_t status_old, status_new; ++ int status_old, status_new; + u8 mask = SR_BP2 | SR_BP1 | SR_BP0; + u8 shift = ffs(mask) - 1, pow, val; ++ loff_t lock_len; ++ bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB; ++ bool use_top; ++ int ret; + + status_old = read_sr(nor); ++ if (status_old < 0) ++ return status_old; ++ ++ /* If nothing in our range is locked, we don't need to do anything */ ++ if (stm_is_unlocked_sr(nor, ofs, len, status_old)) ++ return 0; ++ ++ /* If anything below us is locked, we can't use 'top' protection */ ++ if (!stm_is_unlocked_sr(nor, 0, ofs, status_old)) ++ can_be_top = false; ++ ++ /* If anything above us is locked, we can't use 'bottom' protection */ ++ if (!stm_is_unlocked_sr(nor, ofs + len, mtd->size - (ofs + len), ++ status_old)) ++ can_be_bottom = false; + +- /* Cannot unlock; would unlock larger region than requested */ +- if (stm_is_locked_sr(nor, ofs - mtd->erasesize, mtd->erasesize, +- status_old)) ++ if (!can_be_bottom && !can_be_top) + return -EINVAL; + ++ /* Prefer top, if both are valid */ ++ use_top = can_be_top; ++ ++ /* lock_len: length of region that should remain locked */ ++ if (use_top) ++ lock_len = mtd->size - (ofs + len); ++ else ++ lock_len = ofs; ++ + /* + * Need largest pow such that: + * +@@ -529,8 +648,8 @@ static int stm_unlock(struct spi_nor *no + * + * pow = floor(log2(size / len)) = log2(size) - ceil(log2(len)) + */ +- pow = ilog2(mtd->size) - order_base_2(mtd->size - (ofs + len)); +- if (ofs + len == mtd->size) { ++ pow = ilog2(mtd->size) - order_base_2(lock_len); ++ if (lock_len == 0) { + val = 0; /* fully unlocked */ + } else { + val = mask - (pow << shift); +@@ -539,14 +658,28 @@ static int stm_unlock(struct spi_nor *no + return -EINVAL; + } + +- status_new = (status_old & ~mask) | val; ++ status_new = (status_old & ~mask & ~SR_TB) | val; ++ ++ /* Don't protect status register if we're fully unlocked */ ++ if (lock_len == mtd->size) ++ status_new &= ~SR_SRWD; ++ ++ if (!use_top) ++ status_new |= SR_TB; ++ ++ /* Don't bother if they're the same */ ++ if (status_new == status_old) ++ return 0; + + /* Only modify protection if it will not lock other areas */ +- if ((status_new & mask) >= (status_old & mask)) ++ if ((status_new & mask) > (status_old & mask)) + return -EINVAL; + + write_enable(nor); +- return write_sr(nor, status_new); ++ ret = write_sr(nor, status_new); ++ if (ret) ++ return ret; ++ return spi_nor_wait_till_ready(nor); + } + + /* +@@ -736,8 +869,8 @@ static const struct flash_info spi_nor_i + { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, + { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) }, + { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) }, +- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, +- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, ++ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) }, ++ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) }, + { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, + { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, + { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, +@@ -771,6 +904,7 @@ static const struct flash_info spi_nor_i + { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, ++ { "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) }, + { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) }, + { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ) }, +@@ -834,11 +968,23 @@ static const struct flash_info spi_nor_i + { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) }, + { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, + { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) }, +- { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, ++ { ++ "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, ++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | ++ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) ++ }, + { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) }, + { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, +- { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, +- { "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, ++ { ++ "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128, ++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | ++ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) ++ }, ++ { ++ "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256, ++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | ++ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) ++ }, + { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, + { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, + { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, +@@ -861,7 +1007,7 @@ static const struct flash_info *spi_nor_ + + tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); + if (tmp < 0) { +- dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp); ++ dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp); + return ERR_PTR(tmp); + } + +@@ -872,7 +1018,7 @@ static const struct flash_info *spi_nor_ + return &spi_nor_ids[tmp]; + } + } +- dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %2x, %2x\n", ++ dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n", + id[0], id[1], id[2]); + return ERR_PTR(-ENODEV); + } +@@ -1018,6 +1164,8 @@ static int macronix_quad_enable(struct s + int ret, val; + + val = read_sr(nor); ++ if (val < 0) ++ return val; + write_enable(nor); + + write_sr(nor, val | SR_QUAD_EN_MX); +@@ -1099,7 +1247,7 @@ static int set_quad_mode(struct spi_nor + static int spi_nor_check(struct spi_nor *nor) + { + if (!nor->dev || !nor->read || !nor->write || +- !nor->read_reg || !nor->write_reg || !nor->erase) { ++ !nor->read_reg || !nor->write_reg) { + pr_err("spi-nor: please fill all the necessary fields!\n"); + return -EINVAL; + } +@@ -1112,7 +1260,7 @@ int spi_nor_scan(struct spi_nor *nor, co + const struct flash_info *info = NULL; + struct device *dev = nor->dev; + struct mtd_info *mtd = &nor->mtd; +- struct device_node *np = nor->flash_node; ++ struct device_node *np = spi_nor_get_flash_node(nor); + int ret; + int i; + +@@ -1162,9 +1310,11 @@ int spi_nor_scan(struct spi_nor *nor, co + if (JEDEC_MFR(info) == SNOR_MFR_ATMEL || + JEDEC_MFR(info) == SNOR_MFR_INTEL || + JEDEC_MFR(info) == SNOR_MFR_MACRONIX || +- JEDEC_MFR(info) == SNOR_MFR_SST) { ++ JEDEC_MFR(info) == SNOR_MFR_SST || ++ info->flags & SPI_NOR_HAS_LOCK) { + write_enable(nor); + write_sr(nor, 0); ++ spi_nor_wait_till_ready(nor); + } + + if (!mtd->name) +@@ -1178,7 +1328,8 @@ int spi_nor_scan(struct spi_nor *nor, co + mtd->_read = spi_nor_read; + + /* NOR protection support for STmicro/Micron chips and similar */ +- if (JEDEC_MFR(info) == SNOR_MFR_MICRON) { ++ if (JEDEC_MFR(info) == SNOR_MFR_MICRON || ++ info->flags & SPI_NOR_HAS_LOCK) { + nor->flash_lock = stm_lock; + nor->flash_unlock = stm_unlock; + nor->flash_is_locked = stm_is_locked; +@@ -1198,6 +1349,8 @@ int spi_nor_scan(struct spi_nor *nor, co + + if (info->flags & USE_FSR) + nor->flags |= SNOR_F_USE_FSR; ++ if (info->flags & SPI_NOR_HAS_TB) ++ nor->flags |= SNOR_F_HAS_SR_TB; + + #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS + /* prefer "small sector" erase if possible */ +@@ -1300,6 +1453,12 @@ int spi_nor_scan(struct spi_nor *nor, co + nor->addr_width = 3; + } + ++ if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) { ++ dev_err(dev, "address width is too large: %u\n", ++ nor->addr_width); ++ return -EINVAL; ++ } ++ + nor->read_dummy = spi_nor_read_dummy_cycles(nor); + + dev_info(dev, "%s (%lld Kbytes)\n", info->name, +--- a/drivers/mtd/tests/mtd_nandecctest.c ++++ b/drivers/mtd/tests/mtd_nandecctest.c +@@ -187,7 +187,7 @@ static int double_bit_error_detect(void + __nand_calculate_ecc(error_data, size, calc_ecc); + ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size); + +- return (ret == -1) ? 0 : -EINVAL; ++ return (ret == -EBADMSG) ? 0 : -EINVAL; + } + + static const struct nand_ecc_test nand_ecc_test[] = { +--- a/drivers/mtd/tests/oobtest.c ++++ b/drivers/mtd/tests/oobtest.c +@@ -215,19 +215,19 @@ static int verify_eraseblock(int ebnum) + pr_info("ignoring error as within bitflip_limit\n"); + } + +- if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) { ++ if (use_offset != 0 || use_len < mtd->oobavail) { + int k; + + ops.mode = MTD_OPS_AUTO_OOB; + ops.len = 0; + ops.retlen = 0; +- ops.ooblen = mtd->ecclayout->oobavail; ++ ops.ooblen = mtd->oobavail; + ops.oobretlen = 0; + ops.ooboffs = 0; + ops.datbuf = NULL; + ops.oobbuf = readbuf; + err = mtd_read_oob(mtd, addr, &ops); +- if (err || ops.oobretlen != mtd->ecclayout->oobavail) { ++ if (err || ops.oobretlen != mtd->oobavail) { + pr_err("error: readoob failed at %#llx\n", + (long long)addr); + errcnt += 1; +@@ -244,7 +244,7 @@ static int verify_eraseblock(int ebnum) + /* verify post-(use_offset + use_len) area for 0xff */ + k = use_offset + use_len; + bitflips += memffshow(addr, k, readbuf + k, +- mtd->ecclayout->oobavail - k); ++ mtd->oobavail - k); + + if (bitflips > bitflip_limit) { + pr_err("error: verify failed at %#llx\n", +@@ -269,8 +269,8 @@ static int verify_eraseblock_in_one_go(i + struct mtd_oob_ops ops; + int err = 0; + loff_t addr = (loff_t)ebnum * mtd->erasesize; +- size_t len = mtd->ecclayout->oobavail * pgcnt; +- size_t oobavail = mtd->ecclayout->oobavail; ++ size_t len = mtd->oobavail * pgcnt; ++ size_t oobavail = mtd->oobavail; + size_t bitflips; + int i; + +@@ -394,8 +394,8 @@ static int __init mtd_oobtest_init(void) + goto out; + + use_offset = 0; +- use_len = mtd->ecclayout->oobavail; +- use_len_max = mtd->ecclayout->oobavail; ++ use_len = mtd->oobavail; ++ use_len_max = mtd->oobavail; + vary_offset = 0; + + /* First test: write all OOB, read it back and verify */ +@@ -460,8 +460,8 @@ static int __init mtd_oobtest_init(void) + + /* Write all eraseblocks */ + use_offset = 0; +- use_len = mtd->ecclayout->oobavail; +- use_len_max = mtd->ecclayout->oobavail; ++ use_len = mtd->oobavail; ++ use_len_max = mtd->oobavail; + vary_offset = 1; + prandom_seed_state(&rnd_state, 5); + +@@ -471,8 +471,8 @@ static int __init mtd_oobtest_init(void) + + /* Check all eraseblocks */ + use_offset = 0; +- use_len = mtd->ecclayout->oobavail; +- use_len_max = mtd->ecclayout->oobavail; ++ use_len = mtd->oobavail; ++ use_len_max = mtd->oobavail; + vary_offset = 1; + prandom_seed_state(&rnd_state, 5); + err = verify_all_eraseblocks(); +@@ -480,8 +480,8 @@ static int __init mtd_oobtest_init(void) + goto out; + + use_offset = 0; +- use_len = mtd->ecclayout->oobavail; +- use_len_max = mtd->ecclayout->oobavail; ++ use_len = mtd->oobavail; ++ use_len_max = mtd->oobavail; + vary_offset = 0; + + /* Fourth test: try to write off end of device */ +@@ -501,7 +501,7 @@ static int __init mtd_oobtest_init(void) + ops.retlen = 0; + ops.ooblen = 1; + ops.oobretlen = 0; +- ops.ooboffs = mtd->ecclayout->oobavail; ++ ops.ooboffs = mtd->oobavail; + ops.datbuf = NULL; + ops.oobbuf = writebuf; + pr_info("attempting to start write past end of OOB\n"); +@@ -521,7 +521,7 @@ static int __init mtd_oobtest_init(void) + ops.retlen = 0; + ops.ooblen = 1; + ops.oobretlen = 0; +- ops.ooboffs = mtd->ecclayout->oobavail; ++ ops.ooboffs = mtd->oobavail; + ops.datbuf = NULL; + ops.oobbuf = readbuf; + pr_info("attempting to start read past end of OOB\n"); +@@ -543,7 +543,7 @@ static int __init mtd_oobtest_init(void) + ops.mode = MTD_OPS_AUTO_OOB; + ops.len = 0; + ops.retlen = 0; +- ops.ooblen = mtd->ecclayout->oobavail + 1; ++ ops.ooblen = mtd->oobavail + 1; + ops.oobretlen = 0; + ops.ooboffs = 0; + ops.datbuf = NULL; +@@ -563,7 +563,7 @@ static int __init mtd_oobtest_init(void) + ops.mode = MTD_OPS_AUTO_OOB; + ops.len = 0; + ops.retlen = 0; +- ops.ooblen = mtd->ecclayout->oobavail + 1; ++ ops.ooblen = mtd->oobavail + 1; + ops.oobretlen = 0; + ops.ooboffs = 0; + ops.datbuf = NULL; +@@ -587,7 +587,7 @@ static int __init mtd_oobtest_init(void) + ops.mode = MTD_OPS_AUTO_OOB; + ops.len = 0; + ops.retlen = 0; +- ops.ooblen = mtd->ecclayout->oobavail; ++ ops.ooblen = mtd->oobavail; + ops.oobretlen = 0; + ops.ooboffs = 1; + ops.datbuf = NULL; +@@ -607,7 +607,7 @@ static int __init mtd_oobtest_init(void) + ops.mode = MTD_OPS_AUTO_OOB; + ops.len = 0; + ops.retlen = 0; +- ops.ooblen = mtd->ecclayout->oobavail; ++ ops.ooblen = mtd->oobavail; + ops.oobretlen = 0; + ops.ooboffs = 1; + ops.datbuf = NULL; +@@ -638,7 +638,7 @@ static int __init mtd_oobtest_init(void) + for (i = 0; i < ebcnt - 1; ++i) { + int cnt = 2; + int pg; +- size_t sz = mtd->ecclayout->oobavail; ++ size_t sz = mtd->oobavail; + if (bbt[i] || bbt[i + 1]) + continue; + addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize; +@@ -673,13 +673,12 @@ static int __init mtd_oobtest_init(void) + for (i = 0; i < ebcnt - 1; ++i) { + if (bbt[i] || bbt[i + 1]) + continue; +- prandom_bytes_state(&rnd_state, writebuf, +- mtd->ecclayout->oobavail * 2); ++ prandom_bytes_state(&rnd_state, writebuf, mtd->oobavail * 2); + addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize; + ops.mode = MTD_OPS_AUTO_OOB; + ops.len = 0; + ops.retlen = 0; +- ops.ooblen = mtd->ecclayout->oobavail * 2; ++ ops.ooblen = mtd->oobavail * 2; + ops.oobretlen = 0; + ops.ooboffs = 0; + ops.datbuf = NULL; +@@ -688,7 +687,7 @@ static int __init mtd_oobtest_init(void) + if (err) + goto out; + if (memcmpshow(addr, readbuf, writebuf, +- mtd->ecclayout->oobavail * 2)) { ++ mtd->oobavail * 2)) { + pr_err("error: verify failed at %#llx\n", + (long long)addr); + errcnt += 1; +--- a/drivers/mtd/tests/pagetest.c ++++ b/drivers/mtd/tests/pagetest.c +@@ -127,13 +127,12 @@ static int crosstest(void) + unsigned char *pp1, *pp2, *pp3, *pp4; + + pr_info("crosstest\n"); +- pp1 = kmalloc(pgsize * 4, GFP_KERNEL); ++ pp1 = kzalloc(pgsize * 4, GFP_KERNEL); + if (!pp1) + return -ENOMEM; + pp2 = pp1 + pgsize; + pp3 = pp2 + pgsize; + pp4 = pp3 + pgsize; +- memset(pp1, 0, pgsize * 4); + + addr0 = 0; + for (i = 0; i < ebcnt && bbt[i]; ++i) +--- a/include/linux/mtd/bbm.h ++++ b/include/linux/mtd/bbm.h +@@ -166,7 +166,6 @@ struct bbm_info { + }; + + /* OneNAND BBT interface */ +-extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd); + extern int onenand_default_bbt(struct mtd_info *mtd); + + #endif /* __LINUX_MTD_BBM_H */ +--- a/include/linux/mtd/fsmc.h ++++ b/include/linux/mtd/fsmc.h +@@ -103,24 +103,6 @@ + + #define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ) + +-/* +- * There are 13 bytes of ecc for every 512 byte block in FSMC version 8 +- * and it has to be read consecutively and immediately after the 512 +- * byte data block for hardware to generate the error bit offsets +- * Managing the ecc bytes in the following way is easier. This way is +- * similar to oobfree structure maintained already in u-boot nand driver +- */ +-#define MAX_ECCPLACE_ENTRIES 32 +- +-struct fsmc_nand_eccplace { +- uint8_t offset; +- uint8_t length; +-}; +- +-struct fsmc_eccplace { +- struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES]; +-}; +- + struct fsmc_nand_timings { + uint8_t tclr; + uint8_t tar; +--- a/include/linux/mtd/inftl.h ++++ b/include/linux/mtd/inftl.h +@@ -44,7 +44,6 @@ struct INFTLrecord { + unsigned int nb_blocks; /* number of physical blocks */ + unsigned int nb_boot_blocks; /* number of blocks used by the bios */ + struct erase_info instr; +- struct nand_ecclayout oobinfo; + }; + + int INFTL_mount(struct INFTLrecord *s); +--- a/include/linux/mtd/map.h ++++ b/include/linux/mtd/map.h +@@ -142,7 +142,9 @@ + #endif + + #ifndef map_bankwidth ++#ifdef CONFIG_MTD + #warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work" ++#endif + static inline int map_bankwidth(void *map) + { + BUG(); +@@ -238,8 +240,11 @@ struct map_info { + If there is no cache to care about this can be set to NULL. */ + void (*inval_cache)(struct map_info *, unsigned long, ssize_t); + +- /* set_vpp() must handle being reentered -- enable, enable, disable +- must leave it enabled. */ ++ /* This will be called with 1 as parameter when the first map user ++ * needs VPP, and called with 0 when the last user exits. The map ++ * core maintains a reference counter, and assumes that VPP is a ++ * global resource applying to all mapped flash chips on the system. ++ */ + void (*set_vpp)(struct map_info *, int); + + unsigned long pfow_base; +--- a/include/linux/mtd/mtd.h ++++ b/include/linux/mtd/mtd.h +@@ -100,17 +100,35 @@ struct mtd_oob_ops { + + #define MTD_MAX_OOBFREE_ENTRIES_LARGE 32 + #define MTD_MAX_ECCPOS_ENTRIES_LARGE 640 ++/** ++ * struct mtd_oob_region - oob region definition ++ * @offset: region offset ++ * @length: region length ++ * ++ * This structure describes a region of the OOB area, and is used ++ * to retrieve ECC or free bytes sections. ++ * Each section is defined by an offset within the OOB area and a ++ * length. ++ */ ++struct mtd_oob_region { ++ u32 offset; ++ u32 length; ++}; ++ + /* +- * Internal ECC layout control structure. For historical reasons, there is a +- * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained +- * for export to user-space via the ECCGETLAYOUT ioctl. +- * nand_ecclayout should be expandable in the future simply by the above macros. ++ * struct mtd_ooblayout_ops - NAND OOB layout operations ++ * @ecc: function returning an ECC region in the OOB area. ++ * Should return -ERANGE if %section exceeds the total number of ++ * ECC sections. ++ * @free: function returning a free region in the OOB area. ++ * Should return -ERANGE if %section exceeds the total number of ++ * free sections. + */ +-struct nand_ecclayout { +- __u32 eccbytes; +- __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE]; +- __u32 oobavail; +- struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE]; ++struct mtd_ooblayout_ops { ++ int (*ecc)(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oobecc); ++ int (*free)(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oobfree); + }; + + struct module; /* only needed for owner field in mtd_info */ +@@ -171,8 +189,8 @@ struct mtd_info { + const char *name; + int index; + +- /* ECC layout structure pointer - read only! */ +- struct nand_ecclayout *ecclayout; ++ /* OOB layout description */ ++ const struct mtd_ooblayout_ops *ooblayout; + + /* the ecc step size. */ + unsigned int ecc_step_size; +@@ -258,6 +276,46 @@ struct mtd_info { + int usecount; + }; + ++int mtd_ooblayout_ecc(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oobecc); ++int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte, ++ int *section, ++ struct mtd_oob_region *oobregion); ++int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf, ++ const u8 *oobbuf, int start, int nbytes); ++int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf, ++ u8 *oobbuf, int start, int nbytes); ++int mtd_ooblayout_free(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oobfree); ++int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf, ++ const u8 *oobbuf, int start, int nbytes); ++int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf, ++ u8 *oobbuf, int start, int nbytes); ++int mtd_ooblayout_count_freebytes(struct mtd_info *mtd); ++int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd); ++ ++static inline void mtd_set_ooblayout(struct mtd_info *mtd, ++ const struct mtd_ooblayout_ops *ooblayout) ++{ ++ mtd->ooblayout = ooblayout; ++} ++ ++static inline void mtd_set_of_node(struct mtd_info *mtd, ++ struct device_node *np) ++{ ++ mtd->dev.of_node = np; ++} ++ ++static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd) ++{ ++ return mtd->dev.of_node; ++} ++ ++static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops) ++{ ++ return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize; ++} ++ + int mtd_erase(struct mtd_info *mtd, struct erase_info *instr); + int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + void **virt, resource_size_t *phys); +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -119,6 +119,12 @@ typedef enum { + NAND_ECC_SOFT_BCH, + } nand_ecc_modes_t; + ++enum nand_ecc_algo { ++ NAND_ECC_UNKNOWN, ++ NAND_ECC_HAMMING, ++ NAND_ECC_BCH, ++}; ++ + /* + * Constants for Hardware ECC + */ +@@ -129,6 +135,14 @@ typedef enum { + /* Enable Hardware ECC before syndrome is read back from flash */ + #define NAND_ECC_READSYN 2 + ++/* ++ * Enable generic NAND 'page erased' check. This check is only done when ++ * ecc.correct() returns -EBADMSG. ++ * Set this flag if your implementation does not fix bitflips in erased ++ * pages and you want to rely on the default implementation. ++ */ ++#define NAND_ECC_GENERIC_ERASED_CHECK BIT(0) ++ + /* Bit mask for flags passed to do_nand_read_ecc */ + #define NAND_GET_DEVICE 0x80 + +@@ -160,6 +174,12 @@ typedef enum { + /* Device supports subpage reads */ + #define NAND_SUBPAGE_READ 0x00001000 + ++/* ++ * Some MLC NANDs need data scrambling to limit bitflips caused by repeated ++ * patterns. ++ */ ++#define NAND_NEED_SCRAMBLING 0x00002000 ++ + /* Options valid for Samsung large page devices */ + #define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG + +@@ -276,15 +296,15 @@ struct nand_onfi_params { + __le16 t_r; + __le16 t_ccs; + __le16 src_sync_timing_mode; +- __le16 src_ssync_features; ++ u8 src_ssync_features; + __le16 clk_pin_capacitance_typ; + __le16 io_pin_capacitance_typ; + __le16 input_pin_capacitance_typ; + u8 input_pin_capacitance_max; + u8 driver_strength_support; + __le16 t_int_r; +- __le16 t_ald; +- u8 reserved4[7]; ++ __le16 t_adl; ++ u8 reserved4[8]; + + /* vendor */ + __le16 vendor_revision; +@@ -407,7 +427,7 @@ struct nand_jedec_params { + __le16 input_pin_capacitance_typ; + __le16 clk_pin_capacitance_typ; + u8 driver_strength_support; +- __le16 t_ald; ++ __le16 t_adl; + u8 reserved4[36]; + + /* ECC and endurance block */ +@@ -444,6 +464,7 @@ struct nand_hw_control { + /** + * struct nand_ecc_ctrl - Control structure for ECC + * @mode: ECC mode ++ * @algo: ECC algorithm + * @steps: number of ECC steps per page + * @size: data bytes per ECC step + * @bytes: ECC bytes per step +@@ -451,12 +472,18 @@ struct nand_hw_control { + * @total: total number of ECC bytes per page + * @prepad: padding information for syndrome based ECC generators + * @postpad: padding information for syndrome based ECC generators +- * @layout: ECC layout control struct pointer ++ * @options: ECC specific options (see NAND_ECC_XXX flags defined above) + * @priv: pointer to private ECC control data + * @hwctl: function to control hardware ECC generator. Must only + * be provided if an hardware ECC is available + * @calculate: function for ECC calculation or readback from ECC hardware +- * @correct: function for ECC correction, matching to ECC generator (sw/hw) ++ * @correct: function for ECC correction, matching to ECC generator (sw/hw). ++ * Should return a positive number representing the number of ++ * corrected bitflips, -EBADMSG if the number of bitflips exceed ++ * ECC strength, or any other error code if the error is not ++ * directly related to correction. ++ * If -EBADMSG is returned the input buffers should be left ++ * untouched. + * @read_page_raw: function to read a raw page without ECC. This function + * should hide the specific layout used by the ECC + * controller and always return contiguous in-band and +@@ -487,6 +514,7 @@ struct nand_hw_control { + */ + struct nand_ecc_ctrl { + nand_ecc_modes_t mode; ++ enum nand_ecc_algo algo; + int steps; + int size; + int bytes; +@@ -494,7 +522,7 @@ struct nand_ecc_ctrl { + int strength; + int prepad; + int postpad; +- struct nand_ecclayout *layout; ++ unsigned int options; + void *priv; + void (*hwctl)(struct mtd_info *mtd, int mode); + int (*calculate)(struct mtd_info *mtd, const uint8_t *dat, +@@ -540,11 +568,11 @@ struct nand_buffers { + + /** + * struct nand_chip - NAND Private Flash Chip Data ++ * @mtd: MTD device registered to the MTD framework + * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the + * flash device + * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the + * flash device. +- * @flash_node: [BOARDSPECIFIC] device node describing this instance + * @read_byte: [REPLACEABLE] read one byte from the chip + * @read_word: [REPLACEABLE] read one word from the chip + * @write_byte: [REPLACEABLE] write a single byte to the chip on the +@@ -640,18 +668,17 @@ struct nand_buffers { + */ + + struct nand_chip { ++ struct mtd_info mtd; + void __iomem *IO_ADDR_R; + void __iomem *IO_ADDR_W; + +- struct device_node *flash_node; +- + uint8_t (*read_byte)(struct mtd_info *mtd); + u16 (*read_word)(struct mtd_info *mtd); + void (*write_byte)(struct mtd_info *mtd, uint8_t byte); + void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); + void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); + void (*select_chip)(struct mtd_info *mtd, int chip); +- int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); ++ int (*block_bad)(struct mtd_info *mtd, loff_t ofs); + int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); + void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); + int (*dev_ready)(struct mtd_info *mtd); +@@ -719,6 +746,40 @@ struct nand_chip { + void *priv; + }; + ++extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops; ++extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops; ++ ++static inline void nand_set_flash_node(struct nand_chip *chip, ++ struct device_node *np) ++{ ++ mtd_set_of_node(&chip->mtd, np); ++} ++ ++static inline struct device_node *nand_get_flash_node(struct nand_chip *chip) ++{ ++ return mtd_get_of_node(&chip->mtd); ++} ++ ++static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd) ++{ ++ return container_of(mtd, struct nand_chip, mtd); ++} ++ ++static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip) ++{ ++ return &chip->mtd; ++} ++ ++static inline void *nand_get_controller_data(struct nand_chip *chip) ++{ ++ return chip->priv; ++} ++ ++static inline void nand_set_controller_data(struct nand_chip *chip, void *priv) ++{ ++ chip->priv = priv; ++} ++ + /* + * NAND Flash Manufacturer ID Codes + */ +@@ -850,7 +911,6 @@ extern int nand_do_read(struct mtd_info + * @chip_delay: R/B delay value in us + * @options: Option flags, e.g. 16bit buswidth + * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH +- * @ecclayout: ECC layout info structure + * @part_probe_types: NULL-terminated array of probe types + */ + struct platform_nand_chip { +@@ -858,7 +918,6 @@ struct platform_nand_chip { + int chip_offset; + int nr_partitions; + struct mtd_partition *partitions; +- struct nand_ecclayout *ecclayout; + int chip_delay; + unsigned int options; + unsigned int bbt_options; +@@ -908,15 +967,6 @@ struct platform_nand_data { + struct platform_nand_ctrl ctrl; + }; + +-/* Some helpers to access the data structures */ +-static inline +-struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd) +-{ +- struct nand_chip *chip = mtd->priv; +- +- return chip->priv; +-} +- + /* return the supported features. */ + static inline int onfi_feature(struct nand_chip *chip) + { +--- a/include/linux/mtd/nand_bch.h ++++ b/include/linux/mtd/nand_bch.h +@@ -32,9 +32,7 @@ int nand_bch_correct_data(struct mtd_inf + /* + * Initialize BCH encoder/decoder + */ +-struct nand_bch_control * +-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, +- unsigned int eccbytes, struct nand_ecclayout **ecclayout); ++struct nand_bch_control *nand_bch_init(struct mtd_info *mtd); + /* + * Release BCH encoder/decoder resources + */ +@@ -55,12 +53,10 @@ static inline int + nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc) + { +- return -1; ++ return -ENOTSUPP; + } + +-static inline struct nand_bch_control * +-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, +- unsigned int eccbytes, struct nand_ecclayout **ecclayout) ++static inline struct nand_bch_control *nand_bch_init(struct mtd_info *mtd) + { + return NULL; + } +--- a/include/linux/mtd/nftl.h ++++ b/include/linux/mtd/nftl.h +@@ -50,7 +50,6 @@ struct NFTLrecord { + unsigned int nb_blocks; /* number of physical blocks */ + unsigned int nb_boot_blocks; /* number of blocks used by the bios */ + struct erase_info instr; +- struct nand_ecclayout oobinfo; + }; + + int NFTL_mount(struct NFTLrecord *s); +--- a/include/linux/mtd/onenand.h ++++ b/include/linux/mtd/onenand.h +@@ -80,7 +80,6 @@ struct onenand_bufferram { + * @page_buf: [INTERN] page main data buffer + * @oob_buf: [INTERN] page oob data buffer + * @subpagesize: [INTERN] holds the subpagesize +- * @ecclayout: [REPLACEABLE] the default ecc placement scheme + * @bbm: [REPLACEABLE] pointer to Bad Block Management + * @priv: [OPTIONAL] pointer to private chip date + */ +@@ -134,7 +133,6 @@ struct onenand_chip { + #endif + + int subpagesize; +- struct nand_ecclayout *ecclayout; + + void *bbm; + +--- a/include/linux/mtd/partitions.h ++++ b/include/linux/mtd/partitions.h +@@ -42,7 +42,6 @@ struct mtd_partition { + uint64_t size; /* partition size */ + uint64_t offset; /* offset within the master MTD space */ + uint32_t mask_flags; /* master MTD flags to mask out for this partition */ +- struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */ + }; + + #define MTDPART_OFS_RETAIN (-3) +@@ -56,11 +55,9 @@ struct device_node; + /** + * struct mtd_part_parser_data - used to pass data to MTD partition parsers. + * @origin: for RedBoot, start address of MTD device +- * @of_node: for OF parsers, device node containing partitioning information + */ + struct mtd_part_parser_data { + unsigned long origin; +- struct device_node *of_node; + }; + + +@@ -78,14 +75,34 @@ struct mtd_part_parser { + struct list_head list; + struct module *owner; + const char *name; +- int (*parse_fn)(struct mtd_info *, struct mtd_partition **, ++ int (*parse_fn)(struct mtd_info *, const struct mtd_partition **, + struct mtd_part_parser_data *); ++ void (*cleanup)(const struct mtd_partition *pparts, int nr_parts); + enum mtd_parser_type type; + }; + +-extern void register_mtd_parser(struct mtd_part_parser *parser); ++/* Container for passing around a set of parsed partitions */ ++struct mtd_partitions { ++ const struct mtd_partition *parts; ++ int nr_parts; ++ const struct mtd_part_parser *parser; ++}; ++ ++extern int __register_mtd_parser(struct mtd_part_parser *parser, ++ struct module *owner); ++#define register_mtd_parser(parser) __register_mtd_parser(parser, THIS_MODULE) ++ + extern void deregister_mtd_parser(struct mtd_part_parser *parser); + ++/* ++ * module_mtd_part_parser() - Helper macro for MTD partition parsers that don't ++ * do anything special in module init/exit. Each driver may only use this macro ++ * once, and calling it replaces module_init() and module_exit(). ++ */ ++#define module_mtd_part_parser(__mtd_part_parser) \ ++ module_driver(__mtd_part_parser, register_mtd_parser, \ ++ deregister_mtd_parser) ++ + int mtd_is_partition(const struct mtd_info *mtd); + int mtd_add_partition(struct mtd_info *master, const char *name, + long long offset, long long length); +--- a/include/linux/mtd/sh_flctl.h ++++ b/include/linux/mtd/sh_flctl.h +@@ -143,11 +143,11 @@ enum flctl_ecc_res_t { + struct dma_chan; + + struct sh_flctl { +- struct mtd_info mtd; + struct nand_chip chip; + struct platform_device *pdev; + struct dev_pm_qos_request pm_qos; + void __iomem *reg; ++ resource_size_t fifo; + + uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */ + int read_bytes; +@@ -186,7 +186,7 @@ struct sh_flctl_platform_data { + + static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo) + { +- return container_of(mtdinfo, struct sh_flctl, mtd); ++ return container_of(mtd_to_nand(mtdinfo), struct sh_flctl, chip); + } + + #endif /* __SH_FLCTL_H__ */ +--- a/include/linux/mtd/sharpsl.h ++++ b/include/linux/mtd/sharpsl.h +@@ -14,7 +14,7 @@ + + struct sharpsl_nand_platform_data { + struct nand_bbt_descr *badblock_pattern; +- struct nand_ecclayout *ecc_layout; ++ const struct mtd_ooblayout_ops *ecc_layout; + struct mtd_partition *partitions; + unsigned int nr_partitions; + }; +--- a/include/uapi/mtd/mtd-abi.h ++++ b/include/uapi/mtd/mtd-abi.h +@@ -228,7 +228,7 @@ struct nand_oobfree { + * complete set of ECC information. The ioctl truncates the larger internal + * structure to retain binary compatibility with the static declaration of the + * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of +- * the user struct, not the MAX size of the internal struct nand_ecclayout. ++ * the user struct, not the MAX size of the internal OOB layout representation. + */ + struct nand_ecclayout_user { + __u32 eccbytes; +--- a/fs/jffs2/wbuf.c ++++ b/fs/jffs2/wbuf.c +@@ -1153,7 +1153,7 @@ static struct jffs2_sb_info *work_to_sb( + { + struct delayed_work *dwork; + +- dwork = container_of(work, struct delayed_work, work); ++ dwork = to_delayed_work(work); + return container_of(dwork, struct jffs2_sb_info, wbuf_dwork); + } + +@@ -1183,22 +1183,20 @@ void jffs2_dirty_trigger(struct jffs2_sb + + int jffs2_nand_flash_setup(struct jffs2_sb_info *c) + { +- struct nand_ecclayout *oinfo = c->mtd->ecclayout; +- + if (!c->mtd->oobsize) + return 0; + + /* Cleanmarker is out-of-band, so inline size zero */ + c->cleanmarker_size = 0; + +- if (!oinfo || oinfo->oobavail == 0) { ++ if (c->mtd->oobavail == 0) { + pr_err("inconsistent device description\n"); + return -EINVAL; + } + + jffs2_dbg(1, "using OOB on NAND\n"); + +- c->oobavail = oinfo->oobavail; ++ c->oobavail = c->mtd->oobavail; + + /* Initialise write buffer */ + init_rwsem(&c->wbuf_sem); +--- a/include/linux/mtd/spi-nor.h ++++ b/include/linux/mtd/spi-nor.h +@@ -85,6 +85,7 @@ + #define SR_BP0 BIT(2) /* Block protect 0 */ + #define SR_BP1 BIT(3) /* Block protect 1 */ + #define SR_BP2 BIT(4) /* Block protect 2 */ ++#define SR_TB BIT(5) /* Top/Bottom protect */ + #define SR_SRWD BIT(7) /* SR write protect */ + + #define SR_QUAD_EN_MX BIT(6) /* Macronix Quad I/O */ +@@ -116,6 +117,7 @@ enum spi_nor_ops { + + enum spi_nor_option_flags { + SNOR_F_USE_FSR = BIT(0), ++ SNOR_F_HAS_SR_TB = BIT(1), + }; + + /** +@@ -123,7 +125,6 @@ enum spi_nor_option_flags { + * @mtd: point to a mtd_info structure + * @lock: the lock for the read/write/erase/lock/unlock operations + * @dev: point to a spi device, or a spi nor controller device. +- * @flash_node: point to a device node describing this flash instance. + * @page_size: the page size of the SPI NOR + * @addr_width: number of address bytes + * @erase_opcode: the opcode for erasing a sector +@@ -143,7 +144,8 @@ enum spi_nor_option_flags { + * @read: [DRIVER-SPECIFIC] read data from the SPI NOR + * @write: [DRIVER-SPECIFIC] write data to the SPI NOR + * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR +- * at the offset @offs ++ * at the offset @offs; if not provided by the driver, ++ * spi-nor will send the erase opcode via write_reg() + * @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR + * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR + * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is +@@ -154,7 +156,6 @@ struct spi_nor { + struct mtd_info mtd; + struct mutex lock; + struct device *dev; +- struct device_node *flash_node; + u32 page_size; + u8 addr_width; + u8 erase_opcode; +@@ -184,6 +185,17 @@ struct spi_nor { + void *priv; + }; + ++static inline void spi_nor_set_flash_node(struct spi_nor *nor, ++ struct device_node *np) ++{ ++ mtd_set_of_node(&nor->mtd, np); ++} ++ ++static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor) ++{ ++ return mtd_get_of_node(&nor->mtd); ++} ++ + /** + * spi_nor_scan() - scan the SPI NOR + * @nor: the spi_nor structure diff --git a/target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch b/target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch new file mode 100644 index 0000000000..aa45441afa --- /dev/null +++ b/target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch @@ -0,0 +1,91 @@ +From 410a91f6efa1c4c3c4369d1dd2c31286749dff33 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 23 Mar 2016 11:19:01 +0100 +Subject: [PATCH 073/102] of: mtd: prepare helper reading NAND ECC algo from + DT +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +NAND subsystem is being slightly reworked to store ECC details in +separated fields. In future we'll want to add support for more DT +properties as specifying every possible setup with a single +"nand-ecc-mode" is a pretty bad idea. +To allow this let's add a helper that will support something like +"nand-ecc-algo" in future. Right now we use it for keeping backward +compatibility. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Boris Brezillon +--- + drivers/of/of_mtd.c | 36 ++++++++++++++++++++++++++++++++++++ + include/linux/of_mtd.h | 6 ++++++ + 2 files changed, 42 insertions(+) + +--- a/drivers/of/of_mtd.c ++++ b/drivers/of/of_mtd.c +@@ -50,6 +50,42 @@ int of_get_nand_ecc_mode(struct device_n + EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode); + + /** ++ * of_get_nand_ecc_algo - Get nand ecc algorithm for given device_node ++ * @np: Pointer to the given device_node ++ * ++ * The function gets ecc algorithm and returns its enum value, or errno in error ++ * case. ++ */ ++int of_get_nand_ecc_algo(struct device_node *np) ++{ ++ const char *pm; ++ int err; ++ ++ /* ++ * TODO: Read ECC algo OF property and map it to enum nand_ecc_algo. ++ * It's not implemented yet as currently NAND subsystem ignores ++ * algorithm explicitly set this way. Once it's handled we should ++ * document & support new property. ++ */ ++ ++ /* ++ * For backward compatibility we also read "nand-ecc-mode" checking ++ * for some obsoleted values that were specifying ECC algorithm. ++ */ ++ err = of_property_read_string(np, "nand-ecc-mode", &pm); ++ if (err < 0) ++ return err; ++ ++ if (!strcasecmp(pm, "soft")) ++ return NAND_ECC_HAMMING; ++ else if (!strcasecmp(pm, "soft_bch")) ++ return NAND_ECC_BCH; ++ ++ return -ENODEV; ++} ++EXPORT_SYMBOL_GPL(of_get_nand_ecc_algo); ++ ++/** + * of_get_nand_ecc_step_size - Get ECC step size associated to + * the required ECC strength (see below). + * @np: Pointer to the given device_node +--- a/include/linux/of_mtd.h ++++ b/include/linux/of_mtd.h +@@ -13,6 +13,7 @@ + + #include + int of_get_nand_ecc_mode(struct device_node *np); ++int of_get_nand_ecc_algo(struct device_node *np); + int of_get_nand_ecc_step_size(struct device_node *np); + int of_get_nand_ecc_strength(struct device_node *np); + int of_get_nand_bus_width(struct device_node *np); +@@ -24,6 +25,11 @@ static inline int of_get_nand_ecc_mode(s + { + return -ENOSYS; + } ++ ++static inline int of_get_nand_ecc_algo(struct device_node *np) ++{ ++ return -ENOSYS; ++} + + static inline int of_get_nand_ecc_step_size(struct device_node *np) + { diff --git a/target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch b/target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch new file mode 100644 index 0000000000..6f1979b11b --- /dev/null +++ b/target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch @@ -0,0 +1,202 @@ +From d45bc58dd3bdcaabc1d7d8d9b0b8dee826635cc6 Mon Sep 17 00:00:00 2001 +From: Marc Gonzalez +Date: Wed, 27 Jul 2016 11:23:52 +0200 +Subject: [PATCH] mtd: nand: import nand_hw_control_init() + +The code to initialize a struct nand_hw_control is duplicated across +several drivers. Factorize it using an inline function. + +Signed-off-by: Marc Gonzalez +Signed-off-by: Boris Brezillon +--- + drivers/mtd/nand/bf5xx_nand.c | 3 +-- + drivers/mtd/nand/brcmnand/brcmnand.c | 3 +-- + drivers/mtd/nand/docg4.c | 3 +-- + drivers/mtd/nand/fsl_elbc_nand.c | 3 +-- + drivers/mtd/nand/fsl_ifc_nand.c | 3 +-- + drivers/mtd/nand/jz4780_nand.c | 3 +-- + drivers/mtd/nand/nand_base.c | 3 +-- + drivers/mtd/nand/ndfc.c | 3 +-- + drivers/mtd/nand/pxa3xx_nand.c | 3 +-- + drivers/mtd/nand/qcom_nandc.c | 3 +-- + drivers/mtd/nand/s3c2410.c | 3 +-- + drivers/mtd/nand/sunxi_nand.c | 3 +-- + drivers/mtd/nand/txx9ndfmc.c | 3 +-- + include/linux/mtd/nand.h | 7 +++++++ + 14 files changed, 20 insertions(+), 26 deletions(-) + +diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c +index 37da423..3962f55 100644 +--- a/drivers/mtd/nand/bf5xx_nand.c ++++ b/drivers/mtd/nand/bf5xx_nand.c +@@ -761,8 +761,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev) + + platform_set_drvdata(pdev, info); + +- spin_lock_init(&info->controller.lock); +- init_waitqueue_head(&info->controller.wq); ++ nand_hw_control_init(&info->controller); + + info->device = &pdev->dev; + info->platform = plat; +diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c +index 8eb2c64..82ec36b 100644 +--- a/drivers/mtd/nand/brcmnand/brcmnand.c ++++ b/drivers/mtd/nand/brcmnand/brcmnand.c +@@ -2370,8 +2370,7 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc) + + init_completion(&ctrl->done); + init_completion(&ctrl->dma_done); +- spin_lock_init(&ctrl->controller.lock); +- init_waitqueue_head(&ctrl->controller.wq); ++ nand_hw_control_init(&ctrl->controller); + INIT_LIST_HEAD(&ctrl->host_list); + + /* NAND register range */ +diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c +index 4731699..7af2a3c 100644 +--- a/drivers/mtd/nand/docg4.c ++++ b/drivers/mtd/nand/docg4.c +@@ -1249,8 +1249,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd) + nand->options = NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE; + nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA; + nand->controller = &nand->hwcontrol; +- spin_lock_init(&nand->controller->lock); +- init_waitqueue_head(&nand->controller->wq); ++ nand_hw_control_init(nand->controller); + + /* methods */ + nand->cmdfunc = docg4_command; +diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c +index 60a88f2..113f76e 100644 +--- a/drivers/mtd/nand/fsl_elbc_nand.c ++++ b/drivers/mtd/nand/fsl_elbc_nand.c +@@ -879,8 +879,7 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev) + } + elbc_fcm_ctrl->counter++; + +- spin_lock_init(&elbc_fcm_ctrl->controller.lock); +- init_waitqueue_head(&elbc_fcm_ctrl->controller.wq); ++ nand_hw_control_init(&elbc_fcm_ctrl->controller); + fsl_lbc_ctrl_dev->nand = elbc_fcm_ctrl; + } else { + elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand; +diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c +index 4e9e5fd..0a177b1 100644 +--- a/drivers/mtd/nand/fsl_ifc_nand.c ++++ b/drivers/mtd/nand/fsl_ifc_nand.c +@@ -987,8 +987,7 @@ static int fsl_ifc_nand_probe(struct platform_device *dev) + ifc_nand_ctrl->addr = NULL; + fsl_ifc_ctrl_dev->nand = ifc_nand_ctrl; + +- spin_lock_init(&ifc_nand_ctrl->controller.lock); +- init_waitqueue_head(&ifc_nand_ctrl->controller.wq); ++ nand_hw_control_init(&ifc_nand_ctrl->controller); + } else { + ifc_nand_ctrl = fsl_ifc_ctrl_dev->nand; + } +diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c +index 77533f7..53ea796 100644 +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -3191,8 +3191,7 @@ static void nand_set_defaults(struct nand_chip *chip, int busw) + + if (!chip->controller) { + chip->controller = &chip->hwcontrol; +- spin_lock_init(&chip->controller->lock); +- init_waitqueue_head(&chip->controller->wq); ++ nand_hw_control_init(chip->controller); + } + + } +diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c +index 218c789..28e6118 100644 +--- a/drivers/mtd/nand/ndfc.c ++++ b/drivers/mtd/nand/ndfc.c +@@ -218,8 +218,7 @@ static int ndfc_probe(struct platform_device *ofdev) + ndfc = &ndfc_ctrl[cs]; + ndfc->chip_select = cs; + +- spin_lock_init(&ndfc->ndfc_control.lock); +- init_waitqueue_head(&ndfc->ndfc_control.wq); ++ nand_hw_control_init(&ndfc->ndfc_control); + ndfc->ofdev = ofdev; + dev_set_drvdata(&ofdev->dev, ndfc); + +diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c +index 436dd6d..b121bf4 100644 +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -1810,8 +1810,7 @@ static int alloc_nand_resource(struct platform_device *pdev) + chip->cmdfunc = nand_cmdfunc; + } + +- spin_lock_init(&chip->controller->lock); +- init_waitqueue_head(&chip->controller->wq); ++ nand_hw_control_init(chip->controller); + info->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(info->clk)) { + dev_err(&pdev->dev, "failed to get nand clock\n"); +diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c +index d9309cf..b1734d7 100644 +--- a/drivers/mtd/nand/s3c2410.c ++++ b/drivers/mtd/nand/s3c2410.c +@@ -977,8 +977,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) + + platform_set_drvdata(pdev, info); + +- spin_lock_init(&info->controller.lock); +- init_waitqueue_head(&info->controller.wq); ++ nand_hw_control_init(&info->controller); + + /* get the clock source and enable it */ + +diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c +index e414b31..8b5dadc 100644 +--- a/drivers/mtd/nand/sunxi_nand.c ++++ b/drivers/mtd/nand/sunxi_nand.c +@@ -2175,8 +2175,7 @@ static int sunxi_nfc_probe(struct platform_device *pdev) + return -ENOMEM; + + nfc->dev = dev; +- spin_lock_init(&nfc->controller.lock); +- init_waitqueue_head(&nfc->controller.wq); ++ nand_hw_control_init(&nfc->controller); + INIT_LIST_HEAD(&nfc->chips); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); +diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c +index 04d63f5..0a14fda 100644 +--- a/drivers/mtd/nand/txx9ndfmc.c ++++ b/drivers/mtd/nand/txx9ndfmc.c +@@ -303,8 +303,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) + dev_info(&dev->dev, "CLK:%ldMHz HOLD:%d SPW:%d\n", + (gbusclk + 500000) / 1000000, hold, spw); + +- spin_lock_init(&drvdata->hw_control.lock); +- init_waitqueue_head(&drvdata->hw_control.wq); ++ nand_hw_control_init(&drvdata->hw_control); + + platform_set_drvdata(dev, drvdata); + txx9ndfmc_initialize(dev); +diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h +index 8dd6e01..f6a2d5e 100644 +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -460,6 +460,13 @@ struct nand_hw_control { + wait_queue_head_t wq; + }; + ++static inline void nand_hw_control_init(struct nand_hw_control *nfc) ++{ ++ nfc->active = NULL; ++ spin_lock_init(&nfc->lock); ++ init_waitqueue_head(&nfc->wq); ++} ++ + /** + * struct nand_ecc_ctrl - Control structure for ECC + * @mode: ECC mode +-- +2.10.2 + diff --git a/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch b/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch index 4e742786e0..053cd1db36 100644 --- a/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch +++ b/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch @@ -1,13 +1,12 @@ --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig -@@ -546,4 +546,12 @@ config MTD_NAND_HISI504 +@@ -546,4 +546,11 @@ config MTD_NAND_HISI504 help Enables support for NAND controller on Hisilicon SoC Hip04. +config MTD_NAND_OXNAS + tristate "Support for NAND on Plxtech NAS782X SoC" + depends on ARCH_OXNAS -+ select MTD_NAND_PLATFORM + help + Enables support for NAND Flash chips on Plxtech NAS782X SoCs. NAND is attached + to the STATIC Unit.