ar71xx: fix MAC addresses on TP-Link TL-WR1043ND v4
The addresses were read from the 'config' partition, which would not always contain the addresses at the same offsets, depending on the stock firmware version used before flashing LEDE. Change this to get the addresses from the 'product-info' partition, which is read-only. Reported-and-tested-by: Andreas Ziegler <ml@andreas-ziegler.de> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
This commit is contained in:
parent
79440ea756
commit
53839da46e
2 changed files with 3 additions and 2 deletions
|
@ -531,7 +531,8 @@ ar71xx_setup_macs()
|
||||||
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
|
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
|
||||||
;;
|
;;
|
||||||
tl-wr1043nd-v4)
|
tl-wr1043nd-v4)
|
||||||
wan_mac=$(mtd_get_mac_binary config 0x1017c)
|
lan_mac=$(mtd_get_mac_binary product-info 8)
|
||||||
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||||
;;
|
;;
|
||||||
esr900)
|
esr900)
|
||||||
wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
|
wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
|
||||||
|
|
|
@ -57,7 +57,7 @@
|
||||||
#define TL_WR1043_V4_KEYS_POLL_INTERVAL 20 /* msecs */
|
#define TL_WR1043_V4_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||||
#define TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043_V4_KEYS_POLL_INTERVAL)
|
#define TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043_V4_KEYS_POLL_INTERVAL)
|
||||||
|
|
||||||
#define TL_WR1043_V4_MAC_LOCATION 0x1ff80174
|
#define TL_WR1043_V4_MAC_LOCATION 0x1ff50008
|
||||||
|
|
||||||
#define TL_WR1043_V4_EEPROM_ADDR 0x1fff0000
|
#define TL_WR1043_V4_EEPROM_ADDR 0x1fff0000
|
||||||
#define TL_WR1043_V4_WMAC_CALDATA_OFFSET 0x1000
|
#define TL_WR1043_V4_WMAC_CALDATA_OFFSET 0x1000
|
||||||
|
|
Loading…
Reference in a new issue