KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

gemini: add 4.14 support

Browse source 
This adds the patches to get fairly complete Gemini support
using kernel v4.14. It is mainly a backport of patches from
kernel v4.16 with omissions of things like graphics that require
substantial changes and will be better handled once we move
to the v4.16 kernel proper.
On top of this are some WIP patches for USB support.

Tested on Raidsonic NAS4220B and D-link DNS-313.

ChangeLog v4->v5:
- Fix ethernet single gmac usecase
- Fix USB reset (patch from Hans)
- Fix Raidsonic ethernet skew delay
- Fix kernel config (bridge, squashfs, jffs2, usb)
- Disable second usb port on Raidsonic board until fotg210_hcd is fixed

ChangeLog v3->v4:
- Make sure to use tabs rather than spaces in base-files.
- Use the dns313 image tool from the firmware-utils.
- Break out the addition of the v4.14 patches and the removal
  of the v4.4 patches to separate (big) patches.

ChangeLog v2->v3:
- Update the kernel config as indicated by Hauke Martens:
- Regenerate again after rebasing using kernel_oldconfig
  dropping a few optimization settings that are now generic
- Drop CFG80211 stuff (module)
- Drop CIFS stuff (module)
- Drop MAC80211 (module)
- Drop wireless drivers (module)
- Enabled OverlayFS
- Added proper DNS-313 boot image generation with the special
  file header tool.
- Disable CMA in the kernel
- Enable LZMA compression of the kernel
- Consequently name the nas4220b images nas4220b
- Update preinit MAC detection script to handle also DNS-313
- Add board.d/03_hdparm to set the disk to spin down after
  1 minute by default, if we have the hdparm tool installed

ChangeLog v1->v2:
- Processed config through kernel_oldconfig
- Processed patches through make target/linux/{clean,refresh} V=99

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Roman Yeryomin <roman@advem.lv>
This commit is contained in:
Roman Yeryomin 2018-04-29 17:38:07 +03:00 committed by John Crispin
parent 55c9aa27be
commit 4f74957584
38 changed files with 7754 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

576
target/linux/gemini/config-4.14 Normal file
View file

@ -0,0 +1,576 @@
CONFIG_ALIGNMENT_TRAP=y
CONFIG_AMBA_PL08X=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_GEMINI=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_ARCH_MOXART is not set
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
CONFIG_ARCH_MULTI_V4=y
# CONFIG_ARCH_MULTI_V4T is not set
CONFIG_ARCH_MULTI_V4_V5=y
# CONFIG_ARCH_MULTI_V5 is not set
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
# CONFIG_ARCH_WANTS_THP_SWAP is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_SMMU is not set
# CONFIG_ARM_SP805_WATCHDOG is not set
CONFIG_ARM_UNWIND=y
CONFIG_ATA=y
CONFIG_ATAGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BINFMT_MISC=y
# CONFIG_BLK_CGROUP is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BOUNCE=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_SCHED is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="console=ttyS0,19200n8"
CONFIG_CMDLINE_FORCE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_GEMINI=y
CONFIG_COMPACTION=y
CONFIG_COMPAT_BRK=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_COREDUMP=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_CACHE_FA=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_FA=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
CONFIG_CPU_FA526=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_NO_EFFICIENT_FFS=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_TLB_FA=y
CONFIG_CPU_USE_DOMAINS=y
CONFIG_CRASH_CORE=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CRC_CCITT=y
CONFIG_CRC_ITU_T=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_UART_8250 is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_DEVMEM=y
CONFIG_DEVTMPFS=y
CONFIG_DMADEVICES=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ENGINE_RAID=y
# CONFIG_DMA_NOOP_OPS is not set
CONFIG_DMA_OF=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_DRM=y
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_LIB_RANDOM is not set
CONFIG_DRM_PANEL=y
CONFIG_DRM_PANEL_BRIDGE=y
CONFIG_DST_CACHE=y
CONFIG_DTC=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EEPROM_93CX6=y
CONFIG_ELF_CORE=y
# CONFIG_EMBEDDED is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_EXPERT is not set
CONFIG_EXPORTFS=y
CONFIG_EXT4_FS=y
CONFIG_FARADAY_FTINTC010=y
CONFIG_FAT_FS=y
CONFIG_FB=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FHANDLE=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x16=y
CONFIG_FONT_8x8=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FPE_FASTFPE is not set
# CONFIG_FPE_NWFPE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
CONFIG_FTTMR010_TIMER=y
CONFIG_FTWDT010_WATCHDOG=y
CONFIG_FUTEX_PI=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_GEMINI_ETHERNET=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GLOB=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC=y
CONFIG_GRO_CELLS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HDMI=y
CONFIG_HID=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GENERIC=y
CONFIG_HID_ITE=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_HWMON=y
CONFIG_HW_CONSOLE=y
CONFIG_HZ_FIXED=0
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_INET_RAW_DIAG is not set
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INITRAMFS_FORCE is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_INPUT=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_INPUT_LEDS=y
# CONFIG_INPUT_MISC is not set
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_IOMMU_SUPPORT=y
CONFIG_IOSCHED_CFQ=y
CONFIG_IPC_NS=y
CONFIG_IPV6=y
CONFIG_IPV6_SIT=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_MULTICAST is not set
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_XMP_DECODER=y
# CONFIG_ISDN is not set
CONFIG_JBD2=y
CONFIG_KALLSYMS=y
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
CONFIG_KEXEC=y
CONFIG_KEXEC_CORE=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_DLINK_DIR685=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_LDM_DEBUG is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LIBFDT=y
# CONFIG_LIRC is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_GPIO=y
# CONFIG_MEMCG is not set
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MIGRATION=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_MTD_CFI_STAA=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF_GEMINI=y
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_NAMESPACES=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_KUSER_HELPERS=y
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_DSA=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_NS=y
CONFIG_NET_PACKET_ENGINE=y
CONFIG_NET_SWITCHDEV=y
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_NL80211_TESTMODE is not set
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NO_BOOTMEM=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NVMEM=y
CONFIG_OABI_COMPAT=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
# CONFIG_PACKET is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_PATA_FTIDE010=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_FTPCI100=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PID_NS=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_GEMINI=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PM=y
CONFIG_PM_CLK=y
# CONFIG_PM_DEBUG is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GEMINI_POWEROFF=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_RCU=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_QTNFMAC_PEARL_PCIE is not set
CONFIG_RATIONAL=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_EXPERT is not set
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RC_CORE=y
CONFIG_RC_DECODERS=y
# CONFIG_RC_DEVICES is not set
CONFIG_RC_MAP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_GZIP=y
CONFIG_RD_LZ4=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_RD_XZ=y
CONFIG_REALTEK_PHY=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_SPI=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_RELAY=y
CONFIG_RESET_CONTROLLER=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_FTRTC010=y
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RTC_NVMEM=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_SATA_GEMINI=y
CONFIG_SATA_PMP=y
# CONFIG_SCHED_INFO is not set
CONFIG_SCSI=y
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_PROC_FS is not set
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_LM75=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIO=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_SERPORT=y
CONFIG_SG_POOL=y
CONFIG_SLUB_DEBUG=y
CONFIG_SOCK_DIAG=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_SRCU=y
# CONFIG_STAGING is not set
# CONFIG_STRICT_KERNEL_RWX is not set
# CONFIG_STRICT_MODULE_RWX is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_SWIOTLB=y
CONFIG_SWPHY=y
CONFIG_SYNC_FILE=y
# CONFIG_SYN_COOKIES is not set
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_TASKS_RCU=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THIN_ARCHIVES=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TREE_SRCU=y
CONFIG_TUN=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_FOTG210_HCD=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USERIO is not set
CONFIG_USER_NS=y
CONFIG_USE_OF=y
CONFIG_UTS_NS=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_VFAT_FS=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VLAN_8021Q is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_X86=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZLIB_INFLATE=y

50
target/linux/gemini/patches-4.14/0001-cache-patch-from-OpenWRT.patch Normal file
View file

@ -0,0 +1,50 @@
From 57615e112aba6ae4c831d50e769c2c102f013686 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Tue, 7 Jun 2016 22:53:24 +0200
Subject: [PATCH 01/31] cache patch from OpenWRT
---
arch/arm/mm/cache-fa.S | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
--- a/arch/arm/mm/cache-fa.S
+++ b/arch/arm/mm/cache-fa.S
@@ -24,7 +24,8 @@
/*
* The size of one data cache line.
*/
-#define CACHE_DLINESIZE 16
+#define CACHE_DLINESIZE 16
+#define CACHE_DLINESHIFT 4
/*
* The total size of the data cache.
@@ -169,7 +170,17 @@ ENTRY(fa_flush_kern_dcache_area)
* - start - virtual start address
* - end - virtual end address
*/
+__flush_whole_dcache:
+ mcr p15, 0, r0, c7, c14, 0 @ clean/invalidate D cache
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mov pc, lr
+
fa_dma_inv_range:
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT @ total size >= limit?
+ bhs __flush_whole_dcache @ flush whole D cache
+
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry
@@ -193,6 +204,10 @@ fa_dma_inv_range:
* - end - virtual end address
*/
fa_dma_clean_range:
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT @ total size >= limit?
+ bhs __flush_whole_dcache @ flush whole D cache
+
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE

33
target/linux/gemini/patches-4.14/0002-pinctrl-gemini-Add-missing-functions.patch Normal file
View file

@ -0,0 +1,33 @@
From fd7823e6993f440930e9cb85e56375be5823485c Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sat, 14 Oct 2017 17:13:03 +0200
Subject: [PATCH 02/31] pinctrl: gemini: Add missing functions
Some two functions were missing from the Gemini pin control
driver. Noticed when trying to use ethernet. Fix it up by
adding them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/pinctrl-gemini.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/pinctrl/pinctrl-gemini.c
+++ b/drivers/pinctrl/pinctrl-gemini.c
@@ -2074,6 +2074,16 @@ static const struct gemini_pmx_func gemi
.num_groups = ARRAY_SIZE(satagrps),
},
{
+ .name = "usb",
+ .groups = usbgrps,
+ .num_groups = ARRAY_SIZE(usbgrps),
+ },
+ {
+ .name = "gmii",
+ .groups = gmiigrps,
+ .num_groups = ARRAY_SIZE(gmiigrps),
+ },
+ {
.name = "pci",
.groups = pcigrps,
.num_groups = ARRAY_SIZE(pcigrps),

51
target/linux/gemini/patches-4.14/0003-ARM-dts-Add-TVE200-to-the-Gemini-SoC-DTSI.patch Normal file
View file

@ -0,0 +1,51 @@
From 00e53d08bbe92051765c5bb94223b6f628cd3740 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Wed, 11 Oct 2017 19:45:19 +0200
Subject: [PATCH 03/31] ARM: dts: Add TVE200 to the Gemini SoC DTSI
The Faraday TVE200 is present in the Gemini SoC, sometimes
under the name "TVC". Add it to the SoC DTSI file along with
its resources.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/boot/dts/gemini.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -142,6 +142,12 @@
groups = "idegrp";
};
};
+ tvc_default_pins: pinctrl-tvc {
+ mux {
+ function = "tvc";
+ groups = "tvcgrp";
+ };
+ };
};
};
@@ -348,5 +354,20 @@
memcpy-bus-width = <32>;
#dma-cells = <2>;
};
+
+ display-controller@6a000000 {
+ compatible = "cortina,gemini-tvc", "faraday,tve200";
+ reg = <0x6a000000 0x1000>;
+ interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+ resets = <&syscon GEMINI_RESET_TVC>;
+ clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+ <&syscon GEMINI_CLK_TVC>;
+ clock-names = "PCLK", "TVE";
+ pinctrl-names = "default";
+ pinctrl-0 = <&tvc_default_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
};

73
target/linux/gemini/patches-4.14/0004-pinctrl-Add-skew-delay-pin-config-and-bindings.patch Normal file
View file

@ -0,0 +1,73 @@
From eb3742c4250c6a79e7080bdb6286e5df50c7f26a Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sat, 28 Oct 2017 15:37:17 +0200
Subject: [PATCH 04/31] pinctrl: Add skew-delay pin config and bindings
Some pin controllers (such as the Gemini) can control the
expected clock skew and output delay on certain pins with a
sub-nanosecond granularity. This is typically done by shunting
in a number of double inverters in front of or behind the pin.
Make it possible to configure this with a generic binding.
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 4 ++++
drivers/pinctrl/pinconf-generic.c | 2 ++
include/linux/pinctrl/pinconf-generic.h | 5 +++++
3 files changed, 11 insertions(+)
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -271,6 +271,10 @@ output-high - set the pin to output mod
sleep-hardware-state - indicate this is sleep related state which will be programmed
into the registers for the sleep state.
slew-rate - set the slew rate
+skew-delay - this affects the expected clock skew on input pins
+ and the delay before latching a value to an output
+ pin. Typically indicates how many double-inverters are
+ used to delay the signal.
For example:
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -49,6 +49,7 @@ static const struct pin_config_item conf
PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true),
PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false),
PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true),
+ PCONFDUMP(PIN_CONFIG_SKEW_DELAY, "skew delay", NULL, true),
};
static void pinconf_generic_dump_one(struct pinctrl_dev *pctldev,
@@ -181,6 +182,7 @@ static const struct pinconf_generic_para
{ "power-source", PIN_CONFIG_POWER_SOURCE, 0 },
{ "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 },
{ "slew-rate", PIN_CONFIG_SLEW_RATE, 0 },
+ { "skew-delay", PIN_CONFIG_SKEW_DELAY, 0 },
};
/**
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -90,6 +90,10 @@
* @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to
* this parameter (on a custom format) tells the driver which alternative
* slew rate to use.
+ * @PIN_CONFIG_SKEW_DELAY: if the pin has programmable skew rate (on inputs)
+ * or latch delay (on outputs) this parameter (in a custom format)
+ * specifies the clock skew or latch delay. It typically controls how
+ * many double inverters are put in front of the line.
* @PIN_CONFIG_END: this is the last enumerator for pin configurations, if
* you need to pass in custom configurations to the pin controller, use
* PIN_CONFIG_END+1 as the base offset.
@@ -117,6 +121,7 @@ enum pin_config_param {
PIN_CONFIG_POWER_SOURCE,
PIN_CONFIG_SLEEP_HARDWARE_STATE,
PIN_CONFIG_SLEW_RATE,
+ PIN_CONFIG_SKEW_DELAY,
PIN_CONFIG_END = 0x7F,
PIN_CONFIG_MAX = 0xFF,
};

112
target/linux/gemini/patches-4.14/0005-pinctrl-gemini-Use-generic-DT-parser.patch Normal file
View file

@ -0,0 +1,112 @@
From 09240ae27ffca65518f7b9d2360c020c1b1ddabe Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sat, 28 Oct 2017 15:37:18 +0200
Subject: [PATCH 05/31] pinctrl: gemini: Use generic DT parser
We can just use the generic Device Tree parser code
in this driver and save some code.
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/pinctrl-gemini.c | 66 +++-------------------------------------
2 files changed, 5 insertions(+), 62 deletions(-)
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -153,6 +153,7 @@ config PINCTRL_GEMINI
depends on ARCH_GEMINI
default ARCH_GEMINI
select PINMUX
+ select GENERIC_PINCONF
select MFD_SYSCON
config PINCTRL_MCP23S08
--- a/drivers/pinctrl/pinctrl-gemini.c
+++ b/drivers/pinctrl/pinctrl-gemini.c
@@ -13,6 +13,8 @@
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/regmap.h>
@@ -1918,73 +1920,13 @@ static void gemini_pin_dbg_show(struct p
seq_printf(s, " " DRIVER_NAME);
}
-static int gemini_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
- struct device_node *np,
- struct pinctrl_map **map,
- unsigned int *reserved_maps,
- unsigned int *num_maps)
-{
- int ret;
- const char *function = NULL;
- const char *group;
- struct property *prop;
-
- ret = of_property_read_string(np, "function", &function);
- if (ret < 0)
- return ret;
-
- ret = of_property_count_strings(np, "groups");
- if (ret < 0)
- return ret;
-
- ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps,
- num_maps, ret);
- if (ret < 0)
- return ret;
-
- of_property_for_each_string(np, "groups", prop, group) {
- ret = pinctrl_utils_add_map_mux(pctldev, map, reserved_maps,
- num_maps, group, function);
- if (ret < 0)
- return ret;
- pr_debug("ADDED FUNCTION %s <-> GROUP %s\n",
- function, group);
- }
-
- return 0;
-}
-
-static int gemini_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
- struct device_node *np_config,
- struct pinctrl_map **map,
- unsigned int *num_maps)
-{
- unsigned int reserved_maps = 0;
- struct device_node *np;
- int ret;
-
- *map = NULL;
- *num_maps = 0;
-
- for_each_child_of_node(np_config, np) {
- ret = gemini_pinctrl_dt_subnode_to_map(pctldev, np, map,
- &reserved_maps, num_maps);
- if (ret < 0) {
- pinctrl_utils_free_map(pctldev, *map, *num_maps);
- return ret;
- }
- }
-
- return 0;
-};
-
static const struct pinctrl_ops gemini_pctrl_ops = {
.get_groups_count = gemini_get_groups_count,
.get_group_name = gemini_get_group_name,
.get_group_pins = gemini_get_group_pins,
.pin_dbg_show = gemini_pin_dbg_show,
- .dt_node_to_map = gemini_pinctrl_dt_node_to_map,
- .dt_free_map = pinctrl_utils_free_map,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_group,
+ .dt_free_map = pinconf_generic_dt_free_map,
};
/**

280
target/linux/gemini/patches-4.14/0006-pinctrl-gemini-Implement-clock-skew-delay-config.patch Normal file
View file

@ -0,0 +1,280 @@
From 43e8f011ddbb293e0a3394d0f39819ea2ead4a1b Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sat, 28 Oct 2017 15:37:19 +0200
Subject: [PATCH 06/31] pinctrl: gemini: Implement clock skew/delay config
This enabled pin config on the Gemini driver and implements
pin skew/delay so that the ethernet pins clocking can be
properly configured.
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
.../bindings/pinctrl/cortina,gemini-pinctrl.txt | 10 +-
drivers/pinctrl/pinctrl-gemini.c | 178 ++++++++++++++++++++-
2 files changed, 182 insertions(+), 6 deletions(-)
--- a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
@@ -9,8 +9,14 @@ The pin controller node must be a subnod
Required properties:
- compatible: "cortina,gemini-pinctrl"
-Subnodes of the pin controller contain pin control multiplexing set-up.
-Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes.
+Subnodes of the pin controller contain pin control multiplexing set-up
+and pin configuration of individual pins.
+
+Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes
+and generic pin config nodes.
+
+Supported configurations:
+- skew-delay is supported on the Ethernet pins
Example:
--- a/drivers/pinctrl/pinctrl-gemini.c
+++ b/drivers/pinctrl/pinctrl-gemini.c
@@ -24,6 +24,19 @@
#define DRIVER_NAME "pinctrl-gemini"
/**
+ * struct gemini_pin_conf - information about configuring a pin
+ * @pin: the pin number
+ * @reg: config register
+ * @mask: the bits affecting the configuration of the pin
+ */
+struct gemini_pin_conf {
+ unsigned int pin;
+ u32 reg;
+ u32 mask;
+};
+
+/**
+ * struct gemini_pmx - state holder for the gemini pin controller
* @dev: a pointer back to containing device
* @virtbase: the offset to the controller in virtual memory
* @map: regmap to access registers
@@ -31,6 +44,8 @@
* @is_3516: whether the SoC/package is the 3516 variant
* @flash_pin: whether the flash pin (extended pins for parallel
* flash) is set
+ * @confs: pin config information
+ * @nconfs: number of pin config information items
*/
struct gemini_pmx {
struct device *dev;
@@ -39,6 +54,8 @@ struct gemini_pmx {
bool is_3512;
bool is_3516;
bool flash_pin;
+ const struct gemini_pin_conf *confs;
+ unsigned int nconfs;
};
/**
@@ -59,6 +76,13 @@ struct gemini_pin_group {
u32 value;
};
+/* Some straight-forward control registers */
+#define GLOBAL_WORD_ID 0x00
+#define GLOBAL_STATUS 0x04
+#define GLOBAL_STATUS_FLPIN BIT(20)
+#define GLOBAL_GMAC_CTRL_SKEW 0x1c
+#define GLOBAL_GMAC0_DATA_SKEW 0x20
+#define GLOBAL_GMAC1_DATA_SKEW 0x24
/*
* Global Miscellaneous Control Register
* This register controls all Gemini pad/pin multiplexing
@@ -71,9 +95,6 @@ struct gemini_pin_group {
* DISABLED again. So you select a flash configuration once, and then
* you are stuck with it.
*/
-#define GLOBAL_WORD_ID 0x00
-#define GLOBAL_STATUS 0x04
-#define GLOBAL_STATUS_FLPIN BIT(20)
#define GLOBAL_MISC_CTRL 0x30
#define TVC_CLK_PAD_ENABLE BIT(20)
#define PCI_CLK_PAD_ENABLE BIT(17)
@@ -1925,7 +1946,7 @@ static const struct pinctrl_ops gemini_p
.get_group_name = gemini_get_group_name,
.get_group_pins = gemini_get_group_pins,
.pin_dbg_show = gemini_pin_dbg_show,
- .dt_node_to_map = pinconf_generic_dt_node_to_map_group,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
.dt_free_map = pinconf_generic_dt_free_map,
};
@@ -2203,10 +2224,155 @@ static const struct pinmux_ops gemini_pm
.set_mux = gemini_pmx_set_mux,
};
+#define GEMINI_CFGPIN(_n, _r, _lb, _hb) { \
+ .pin = _n, \
+ .reg = _r, \
+ .mask = GENMASK(_hb, _lb) \
+}
+
+static const struct gemini_pin_conf gemini_confs_3512[] = {
+ GEMINI_CFGPIN(259, GLOBAL_GMAC_CTRL_SKEW, 0, 3), /* GMAC0 RXDV */
+ GEMINI_CFGPIN(277, GLOBAL_GMAC_CTRL_SKEW, 4, 7), /* GMAC0 RXC */
+ GEMINI_CFGPIN(241, GLOBAL_GMAC_CTRL_SKEW, 8, 11), /* GMAC0 TXEN */
+ GEMINI_CFGPIN(312, GLOBAL_GMAC_CTRL_SKEW, 12, 15), /* GMAC0 TXC */
+ GEMINI_CFGPIN(298, GLOBAL_GMAC_CTRL_SKEW, 16, 19), /* GMAC1 RXDV */
+ GEMINI_CFGPIN(280, GLOBAL_GMAC_CTRL_SKEW, 20, 23), /* GMAC1 RXC */
+ GEMINI_CFGPIN(316, GLOBAL_GMAC_CTRL_SKEW, 24, 27), /* GMAC1 TXEN */
+ GEMINI_CFGPIN(243, GLOBAL_GMAC_CTRL_SKEW, 28, 31), /* GMAC1 TXC */
+ GEMINI_CFGPIN(295, GLOBAL_GMAC0_DATA_SKEW, 0, 3), /* GMAC0 RXD0 */
+ GEMINI_CFGPIN(313, GLOBAL_GMAC0_DATA_SKEW, 4, 7), /* GMAC0 RXD1 */
+ GEMINI_CFGPIN(242, GLOBAL_GMAC0_DATA_SKEW, 8, 11), /* GMAC0 RXD2 */
+ GEMINI_CFGPIN(260, GLOBAL_GMAC0_DATA_SKEW, 12, 15), /* GMAC0 RXD3 */
+ GEMINI_CFGPIN(294, GLOBAL_GMAC0_DATA_SKEW, 16, 19), /* GMAC0 TXD0 */
+ GEMINI_CFGPIN(276, GLOBAL_GMAC0_DATA_SKEW, 20, 23), /* GMAC0 TXD1 */
+ GEMINI_CFGPIN(258, GLOBAL_GMAC0_DATA_SKEW, 24, 27), /* GMAC0 TXD2 */
+ GEMINI_CFGPIN(240, GLOBAL_GMAC0_DATA_SKEW, 28, 31), /* GMAC0 TXD3 */
+ GEMINI_CFGPIN(262, GLOBAL_GMAC1_DATA_SKEW, 0, 3), /* GMAC1 RXD0 */
+ GEMINI_CFGPIN(244, GLOBAL_GMAC1_DATA_SKEW, 4, 7), /* GMAC1 RXD1 */
+ GEMINI_CFGPIN(317, GLOBAL_GMAC1_DATA_SKEW, 8, 11), /* GMAC1 RXD2 */
+ GEMINI_CFGPIN(299, GLOBAL_GMAC1_DATA_SKEW, 12, 15), /* GMAC1 RXD3 */
+ GEMINI_CFGPIN(261, GLOBAL_GMAC1_DATA_SKEW, 16, 19), /* GMAC1 TXD0 */
+ GEMINI_CFGPIN(279, GLOBAL_GMAC1_DATA_SKEW, 20, 23), /* GMAC1 TXD1 */
+ GEMINI_CFGPIN(297, GLOBAL_GMAC1_DATA_SKEW, 24, 27), /* GMAC1 TXD2 */
+ GEMINI_CFGPIN(315, GLOBAL_GMAC1_DATA_SKEW, 28, 31), /* GMAC1 TXD3 */
+};
+
+static const struct gemini_pin_conf gemini_confs_3516[] = {
+ GEMINI_CFGPIN(347, GLOBAL_GMAC_CTRL_SKEW, 0, 3), /* GMAC0 RXDV */
+ GEMINI_CFGPIN(386, GLOBAL_GMAC_CTRL_SKEW, 4, 7), /* GMAC0 RXC */
+ GEMINI_CFGPIN(307, GLOBAL_GMAC_CTRL_SKEW, 8, 11), /* GMAC0 TXEN */
+ GEMINI_CFGPIN(327, GLOBAL_GMAC_CTRL_SKEW, 12, 15), /* GMAC0 TXC */
+ GEMINI_CFGPIN(309, GLOBAL_GMAC_CTRL_SKEW, 16, 19), /* GMAC1 RXDV */
+ GEMINI_CFGPIN(390, GLOBAL_GMAC_CTRL_SKEW, 20, 23), /* GMAC1 RXC */
+ GEMINI_CFGPIN(370, GLOBAL_GMAC_CTRL_SKEW, 24, 27), /* GMAC1 TXEN */
+ GEMINI_CFGPIN(350, GLOBAL_GMAC_CTRL_SKEW, 28, 31), /* GMAC1 TXC */
+ GEMINI_CFGPIN(367, GLOBAL_GMAC0_DATA_SKEW, 0, 3), /* GMAC0 RXD0 */
+ GEMINI_CFGPIN(348, GLOBAL_GMAC0_DATA_SKEW, 4, 7), /* GMAC0 RXD1 */
+ GEMINI_CFGPIN(387, GLOBAL_GMAC0_DATA_SKEW, 8, 11), /* GMAC0 RXD2 */
+ GEMINI_CFGPIN(328, GLOBAL_GMAC0_DATA_SKEW, 12, 15), /* GMAC0 RXD3 */
+ GEMINI_CFGPIN(306, GLOBAL_GMAC0_DATA_SKEW, 16, 19), /* GMAC0 TXD0 */
+ GEMINI_CFGPIN(325, GLOBAL_GMAC0_DATA_SKEW, 20, 23), /* GMAC0 TXD1 */
+ GEMINI_CFGPIN(346, GLOBAL_GMAC0_DATA_SKEW, 24, 27), /* GMAC0 TXD2 */
+ GEMINI_CFGPIN(326, GLOBAL_GMAC0_DATA_SKEW, 28, 31), /* GMAC0 TXD3 */
+ GEMINI_CFGPIN(391, GLOBAL_GMAC1_DATA_SKEW, 0, 3), /* GMAC1 RXD0 */
+ GEMINI_CFGPIN(351, GLOBAL_GMAC1_DATA_SKEW, 4, 7), /* GMAC1 RXD1 */
+ GEMINI_CFGPIN(310, GLOBAL_GMAC1_DATA_SKEW, 8, 11), /* GMAC1 RXD2 */
+ GEMINI_CFGPIN(371, GLOBAL_GMAC1_DATA_SKEW, 12, 15), /* GMAC1 RXD3 */
+ GEMINI_CFGPIN(329, GLOBAL_GMAC1_DATA_SKEW, 16, 19), /* GMAC1 TXD0 */
+ GEMINI_CFGPIN(389, GLOBAL_GMAC1_DATA_SKEW, 20, 23), /* GMAC1 TXD1 */
+ GEMINI_CFGPIN(369, GLOBAL_GMAC1_DATA_SKEW, 24, 27), /* GMAC1 TXD2 */
+ GEMINI_CFGPIN(308, GLOBAL_GMAC1_DATA_SKEW, 28, 31), /* GMAC1 TXD3 */
+};
+
+static const struct gemini_pin_conf *gemini_get_pin_conf(struct gemini_pmx *pmx,
+ unsigned int pin)
+{
+ const struct gemini_pin_conf *retconf;
+ int i;
+
+ for (i = 0; i < pmx->nconfs; i++) {
+ retconf = &gemini_confs_3516[i];
+ if (retconf->pin == pin)
+ return retconf;
+ }
+ return NULL;
+}
+
+static int gemini_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *config)
+{
+ struct gemini_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+ enum pin_config_param param = pinconf_to_config_param(*config);
+ const struct gemini_pin_conf *conf;
+ u32 val;
+
+ switch (param) {
+ case PIN_CONFIG_SKEW_DELAY:
+ conf = gemini_get_pin_conf(pmx, pin);
+ if (!conf)
+ return -ENOTSUPP;
+ regmap_read(pmx->map, conf->reg, &val);
+ val &= conf->mask;
+ val >>= (ffs(conf->mask) - 1);
+ *config = pinconf_to_config_packed(PIN_CONFIG_SKEW_DELAY, val);
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int gemini_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *configs, unsigned int num_configs)
+{
+ struct gemini_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+ const struct gemini_pin_conf *conf;
+ enum pin_config_param param;
+ u32 arg;
+ int ret = 0;
+ int i;
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_SKEW_DELAY:
+ if (arg > 0xf)
+ return -EINVAL;
+ conf = gemini_get_pin_conf(pmx, pin);
+ if (!conf) {
+ dev_err(pmx->dev,
+ "invalid pin for skew delay %d\n", pin);
+ return -ENOTSUPP;
+ }
+ arg <<= (ffs(conf->mask) - 1);
+ dev_dbg(pmx->dev,
+ "set pin %d to skew delay mask %08x, val %08x\n",
+ pin, conf->mask, arg);
+ regmap_update_bits(pmx->map, conf->reg, conf->mask, arg);
+ break;
+ default:
+ dev_err(pmx->dev, "Invalid config param %04x\n", param);
+ return -ENOTSUPP;
+ }
+ }
+
+ return ret;
+}
+
+static const struct pinconf_ops gemini_pinconf_ops = {
+ .pin_config_get = gemini_pinconf_get,
+ .pin_config_set = gemini_pinconf_set,
+ .is_generic = true,
+};
+
static struct pinctrl_desc gemini_pmx_desc = {
.name = DRIVER_NAME,
.pctlops = &gemini_pctrl_ops,
.pmxops = &gemini_pmx_ops,
+ .confops = &gemini_pinconf_ops,
.owner = THIS_MODULE,
};
@@ -2249,11 +2415,15 @@ static int gemini_pmx_probe(struct platf
val &= 0xffff;
if (val == 0x3512) {
pmx->is_3512 = true;
+ pmx->confs = gemini_confs_3512;
+ pmx->nconfs = ARRAY_SIZE(gemini_confs_3512);
gemini_pmx_desc.pins = gemini_3512_pins;
gemini_pmx_desc.npins = ARRAY_SIZE(gemini_3512_pins);
dev_info(dev, "detected 3512 chip variant\n");
} else if (val == 0x3516) {
pmx->is_3516 = true;
+ pmx->confs = gemini_confs_3516;
+ pmx->nconfs = ARRAY_SIZE(gemini_confs_3516);
gemini_pmx_desc.pins = gemini_3516_pins;
gemini_pmx_desc.npins = ARRAY_SIZE(gemini_3516_pins);
dev_info(dev, "detected 3516 chip variant\n");

186
target/linux/gemini/patches-4.14/0007-pinctrl-gemini-Fix-GMAC-groups.patch Normal file
View file

@ -0,0 +1,186 @@
From e7759c44e0c20dd6b5a259300acdc7350ea6dd32 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 6 Nov 2017 21:27:34 +0100
Subject: [PATCH 07/31] pinctrl: gemini: Fix GMAC groups
The GMII groups need to be split across GMAC0 and GMAC1 since
GMAC0 is always available but GMAC1 masks GPIO2 lines 0-7
so we might want just one interface out.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/pinctrl-gemini.c | 79 +++++++++++++++++++++++++++-------------
1 file changed, 54 insertions(+), 25 deletions(-)
--- a/drivers/pinctrl/pinctrl-gemini.c
+++ b/drivers/pinctrl/pinctrl-gemini.c
@@ -96,6 +96,13 @@ struct gemini_pin_group {
* you are stuck with it.
*/
#define GLOBAL_MISC_CTRL 0x30
+#define GEMINI_GMAC_IOSEL_MASK GENMASK(28, 27)
+/* Not really used */
+#define GEMINI_GMAC_IOSEL_GMAC0_GMII BIT(28)
+/* Activated with GMAC1 */
+#define GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII BIT(27)
+/* This will be the default */
+#define GEMINI_GMAC_IOSEL_GMAC0_RGMII_GMAC1_GPIO2 0
#define TVC_CLK_PAD_ENABLE BIT(20)
#define PCI_CLK_PAD_ENABLE BIT(17)
#define LPC_CLK_PAD_ENABLE BIT(16)
@@ -109,8 +116,8 @@ struct gemini_pin_group {
#define NAND_PADS_DISABLE BIT(2)
#define PFLASH_PADS_DISABLE BIT(1)
#define SFLASH_PADS_DISABLE BIT(0)
-#define PADS_MASK (GENMASK(9, 0) | BIT(16) | BIT(17) | BIT(20))
-#define PADS_MAXBIT 20
+#define PADS_MASK (GENMASK(9, 0) | BIT(16) | BIT(17) | BIT(20) | BIT(27))
+#define PADS_MAXBIT 27
/* Ordered by bit index */
static const char * const gemini_padgroups[] = {
@@ -516,9 +523,12 @@ static const unsigned int usb_3512_pins[
};
/* GMII, ethernet pins */
-static const unsigned int gmii_3512_pins[] = {
- 311, 240, 258, 276, 294, 312, 241, 259, 277, 295, 313, 242, 260, 278, 296,
- 315, 297, 279, 261, 243, 316, 298, 280, 262, 244, 317, 299, 281
+static const unsigned int gmii_gmac0_3512_pins[] = {
+ 240, 241, 242, 258, 259, 260, 276, 277, 278, 294, 295, 311, 312, 313
+};
+
+static const unsigned int gmii_gmac1_3512_pins[] = {
+ 243, 244, 261, 262, 279, 280, 281, 296, 297, 298, 299, 315, 316, 317
};
static const unsigned int pci_3512_pins[] = {
@@ -668,10 +678,10 @@ static const unsigned int gpio1c_3512_pi
/* The GPIO1D (28-31) pins overlap with LCD and TVC */
static const unsigned int gpio1d_3512_pins[] = { 246, 319, 301, 283 };
-/* The GPIO2A (0-3) pins overlap with GMII and extended parallel flash */
+/* The GPIO2A (0-3) pins overlap with GMII GMAC1 and extended parallel flash */
static const unsigned int gpio2a_3512_pins[] = { 315, 297, 279, 261 };
-/* The GPIO2B (4-7) pins overlap with GMII, extended parallel flash and LCD */
+/* The GPIO2B (4-7) pins overlap with GMII GMAC1, extended parallel flash and LCD */
static const unsigned int gpio2b_3512_pins[] = { 262, 244, 317, 299 };
/* The GPIO2C (8-31) pins overlap with PCI */
@@ -738,9 +748,16 @@ static const struct gemini_pin_group gem
.num_pins = ARRAY_SIZE(usb_3512_pins),
},
{
- .name = "gmiigrp",
- .pins = gmii_3512_pins,
- .num_pins = ARRAY_SIZE(gmii_3512_pins),
+ .name = "gmii_gmac0_grp",
+ .pins = gmii_gmac0_3512_pins,
+ .num_pins = ARRAY_SIZE(gmii_gmac0_3512_pins),
+ },
+ {
+ .name = "gmii_gmac1_grp",
+ .pins = gmii_gmac1_3512_pins,
+ .num_pins = ARRAY_SIZE(gmii_gmac1_3512_pins),
+ /* Bring out RGMII on the GMAC1 pins */
+ .value = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
},
{
.name = "pcigrp",
@@ -954,14 +971,15 @@ static const struct gemini_pin_group gem
.name = "gpio2agrp",
.pins = gpio2a_3512_pins,
.num_pins = ARRAY_SIZE(gpio2a_3512_pins),
- /* Conflict with GMII and extended parallel flash */
+ .mask = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
+ /* Conflict with GMII GMAC1 and extended parallel flash */
},
{
.name = "gpio2bgrp",
.pins = gpio2b_3512_pins,
.num_pins = ARRAY_SIZE(gpio2b_3512_pins),
- /* Conflict with GMII, extended parallel flash and LCD */
- .mask = LCD_PADS_ENABLE,
+ /* Conflict with GMII GMAC1, extended parallel flash and LCD */
+ .mask = LCD_PADS_ENABLE | GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
},
{
.name = "gpio2cgrp",
@@ -1441,9 +1459,12 @@ static const unsigned int usb_3516_pins[
};
/* GMII, ethernet pins */
-static const unsigned int gmii_3516_pins[] = {
- 306, 307, 308, 309, 310, 325, 326, 327, 328, 329, 330, 345, 346, 347,
- 348, 349, 350, 351, 367, 368, 369, 370, 371, 386, 387, 389, 390, 391
+static const unsigned int gmii_gmac0_3516_pins[] = {
+ 306, 307, 325, 326, 327, 328, 345, 346, 347, 348, 367, 368, 386, 387
+};
+
+static const unsigned int gmii_gmac1_3516_pins[] = {
+ 308, 309, 310, 329, 330, 349, 350, 351, 369, 370, 371, 389, 390, 391
};
static const unsigned int pci_3516_pins[] = {
@@ -1585,10 +1606,10 @@ static const unsigned int gpio1c_3516_pi
/* The GPIO1D (28-31) pins overlap with TVC */
static const unsigned int gpio1d_3516_pins[] = { 353, 311, 394, 374 };
-/* The GPIO2A (0-3) pins overlap with GMII and extended parallel flash */
+/* The GPIO2A (0-3) pins overlap with GMII GMAC1 and extended parallel flash */
static const unsigned int gpio2a_3516_pins[] = { 308, 369, 389, 329 };
-/* The GPIO2B (4-7) pins overlap with GMII, extended parallel flash and LCD */
+/* The GPIO2B (4-7) pins overlap with GMII GMAC1, extended parallel flash and LCD */
static const unsigned int gpio2b_3516_pins[] = { 391, 351, 310, 371 };
/* The GPIO2C (8-31) pins overlap with PCI */
@@ -1660,9 +1681,16 @@ static const struct gemini_pin_group gem
.num_pins = ARRAY_SIZE(usb_3516_pins),
},
{
- .name = "gmiigrp",
- .pins = gmii_3516_pins,
- .num_pins = ARRAY_SIZE(gmii_3516_pins),
+ .name = "gmii_gmac0_grp",
+ .pins = gmii_gmac0_3516_pins,
+ .num_pins = ARRAY_SIZE(gmii_gmac0_3516_pins),
+ },
+ {
+ .name = "gmii_gmac1_grp",
+ .pins = gmii_gmac1_3516_pins,
+ .num_pins = ARRAY_SIZE(gmii_gmac1_3516_pins),
+ /* Bring out RGMII on the GMAC1 pins */
+ .value = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
},
{
.name = "pcigrp",
@@ -1861,14 +1889,15 @@ static const struct gemini_pin_group gem
.name = "gpio2agrp",
.pins = gpio2a_3516_pins,
.num_pins = ARRAY_SIZE(gpio2a_3516_pins),
- /* Conflict with GMII and extended parallel flash */
+ .mask = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
+ /* Conflict with GMII GMAC1 and extended parallel flash */
},
{
.name = "gpio2bgrp",
.pins = gpio2b_3516_pins,
.num_pins = ARRAY_SIZE(gpio2b_3516_pins),
- /* Conflict with GMII, extended parallel flash and LCD */
- .mask = LCD_PADS_ENABLE,
+ /* Conflict with GMII GMAC1, extended parallel flash and LCD */
+ .mask = LCD_PADS_ENABLE | GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
},
{
.name = "gpio2cgrp",
@@ -1971,7 +2000,7 @@ static const char * const icegrps[] = {
static const char * const idegrps[] = { "idegrp" };
static const char * const satagrps[] = { "satagrp" };
static const char * const usbgrps[] = { "usbgrp" };
-static const char * const gmiigrps[] = { "gmiigrp" };
+static const char * const gmiigrps[] = { "gmii_gmac0_grp", "gmii_gmac1_grp" };
static const char * const pcigrps[] = { "pcigrp" };
static const char * const lpcgrps[] = { "lpcgrp" };
static const char * const lcdgrps[] = { "lcdgrp" };

27
target/linux/gemini/patches-4.14/0008-pinctrl-gemini-Fix-missing-pad-descriptions.patch Normal file
View file

@ -0,0 +1,27 @@
From 3f2941cb12a6d6a0ef4e53e0ecb8d2431d352964 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 13 Nov 2017 22:36:12 +0100
Subject: [PATCH 08/31] pinctrl: gemini: Fix missing pad descriptions
A pretty clever static checker found a bug in my patch: I added more
bits to a bitmask but didn't extend the array indexed to the same
bitmask.
Fixes: 756a024f3983 ("pinctrl: gemini: Fix GMAC groups")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/pinctrl-gemini.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/pinctrl/pinctrl-gemini.c
+++ b/drivers/pinctrl/pinctrl-gemini.c
@@ -136,6 +136,8 @@ static const char * const gemini_padgrou
"PCI CLK",
NULL, NULL,
"TVC CLK",
+ NULL, NULL, NULL, NULL, NULL,
+ "GMAC1",
};
static const struct pinctrl_pin_desc gemini_3512_pins[] = {

25
target/linux/gemini/patches-4.14/0009-pinctrl-gemini-Add-two-missing-GPIO-groups.patch Normal file
View file

@ -0,0 +1,25 @@
From c25653d045ce86c5ae472258fdaa39a6baaf75eb Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sun, 19 Nov 2017 10:57:27 +0100
Subject: [PATCH 09/31] pinctrl: gemini: Add two missing GPIO groups
The 3512 has two more GPIO groups on GPIO area 0, so let's
make it possible to combine these with the function.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/pinctrl-gemini.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/pinctrl/pinctrl-gemini.c
+++ b/drivers/pinctrl/pinctrl-gemini.c
@@ -2015,7 +2015,8 @@ static const char * const sflashgrps[] =
static const char * const gpio0grps[] = { "gpio0agrp", "gpio0bgrp", "gpio0cgrp",
"gpio0dgrp", "gpio0egrp", "gpio0fgrp",
"gpio0ggrp", "gpio0hgrp", "gpio0igrp",
- "gpio0jgrp", "gpio0kgrp" };
+ "gpio0jgrp", "gpio0kgrp", "gpio0lgrp",
+ "gpio0mgrp" };
static const char * const gpio1grps[] = { "gpio1agrp", "gpio1bgrp", "gpio1cgrp",
"gpio1dgrp" };
static const char * const gpio2grps[] = { "gpio2agrp", "gpio2bgrp", "gpio2cgrp" };

25
target/linux/gemini/patches-4.14/0010-pinctrl-gemini-Fix-usage-of-3512-groups.patch Normal file
View file

@ -0,0 +1,25 @@
From 88a5c6ad311588f178c5a88e4eeacc6d40b8ede3 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Wed, 22 Nov 2017 21:04:14 +0100
Subject: [PATCH 10/31] pinctrl: gemini: Fix usage of 3512 groups
The pin config lookup function was still hardcoding the
3516 pin set, which is obviously wrong. Use the pointer
in the state container.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/pinctrl-gemini.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pinctrl/pinctrl-gemini.c
+++ b/drivers/pinctrl/pinctrl-gemini.c
@@ -2323,7 +2323,7 @@ static const struct gemini_pin_conf *gem
int i;
for (i = 0; i < pmx->nconfs; i++) {
- retconf = &gemini_confs_3516[i];
+ retconf = &pmx->confs[i];
if (retconf->pin == pin)
return retconf;
}

198
target/linux/gemini/patches-4.14/0011-pinctrl-gemini-Support-drive-strength-setting.patch Normal file
View file

@ -0,0 +1,198 @@
From f147cf49ef39f5e87d5df9ef1fab52683bc75c63 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sat, 2 Dec 2017 12:23:09 +0100
Subject: [PATCH 11/31] pinctrl: gemini: Support drive strength setting
The Gemini pin controller can set drive strength for a few
select groups of pins (not individually). Implement this
for GMAC0 and 1 (ethernet ports), IDE and PCI.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
.../bindings/pinctrl/cortina,gemini-pinctrl.txt | 3 +
drivers/pinctrl/pinctrl-gemini.c | 81 ++++++++++++++++++++++
2 files changed, 84 insertions(+)
--- a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
@@ -17,6 +17,9 @@ and generic pin config nodes.
Supported configurations:
- skew-delay is supported on the Ethernet pins
+- drive-strength with 4, 8, 12 or 16 mA as argument is supported for
+ entire groups on the groups "idegrp", "gmii_gmac0_grp", "gmii_gmac1_grp"
+ and "pcigrp".
Example:
--- a/drivers/pinctrl/pinctrl-gemini.c
+++ b/drivers/pinctrl/pinctrl-gemini.c
@@ -67,6 +67,9 @@ struct gemini_pmx {
* elements in .pins so we can iterate over that array
* @mask: bits to clear to enable this when doing pin muxing
* @value: bits to set to enable this when doing pin muxing
+ * @driving_mask: bitmask for the IO Pad driving register for this
+ * group, if it supports altering the driving strength of
+ * its lines.
*/
struct gemini_pin_group {
const char *name;
@@ -74,12 +77,14 @@ struct gemini_pin_group {
const unsigned int num_pins;
u32 mask;
u32 value;
+ u32 driving_mask;
};
/* Some straight-forward control registers */
#define GLOBAL_WORD_ID 0x00
#define GLOBAL_STATUS 0x04
#define GLOBAL_STATUS_FLPIN BIT(20)
+#define GLOBAL_IODRIVE 0x10
#define GLOBAL_GMAC_CTRL_SKEW 0x1c
#define GLOBAL_GMAC0_DATA_SKEW 0x20
#define GLOBAL_GMAC1_DATA_SKEW 0x24
@@ -738,6 +743,7 @@ static const struct gemini_pin_group gem
/* Conflict with all flash usage */
.value = IDE_PADS_ENABLE | NAND_PADS_DISABLE |
PFLASH_PADS_DISABLE | SFLASH_PADS_DISABLE,
+ .driving_mask = GENMASK(21, 20),
},
{
.name = "satagrp",
@@ -753,6 +759,7 @@ static const struct gemini_pin_group gem
.name = "gmii_gmac0_grp",
.pins = gmii_gmac0_3512_pins,
.num_pins = ARRAY_SIZE(gmii_gmac0_3512_pins),
+ .driving_mask = GENMASK(17, 16),
},
{
.name = "gmii_gmac1_grp",
@@ -760,6 +767,7 @@ static const struct gemini_pin_group gem
.num_pins = ARRAY_SIZE(gmii_gmac1_3512_pins),
/* Bring out RGMII on the GMAC1 pins */
.value = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
+ .driving_mask = GENMASK(19, 18),
},
{
.name = "pcigrp",
@@ -767,6 +775,7 @@ static const struct gemini_pin_group gem
.num_pins = ARRAY_SIZE(pci_3512_pins),
/* Conflict only with GPIO2 */
.value = PCI_PADS_ENABLE | PCI_CLK_PAD_ENABLE,
+ .driving_mask = GENMASK(23, 22),
},
{
.name = "lpcgrp",
@@ -1671,6 +1680,7 @@ static const struct gemini_pin_group gem
/* Conflict with all flash usage */
.value = IDE_PADS_ENABLE | NAND_PADS_DISABLE |
PFLASH_PADS_DISABLE | SFLASH_PADS_DISABLE,
+ .driving_mask = GENMASK(21, 20),
},
{
.name = "satagrp",
@@ -1686,6 +1696,7 @@ static const struct gemini_pin_group gem
.name = "gmii_gmac0_grp",
.pins = gmii_gmac0_3516_pins,
.num_pins = ARRAY_SIZE(gmii_gmac0_3516_pins),
+ .driving_mask = GENMASK(17, 16),
},
{
.name = "gmii_gmac1_grp",
@@ -1693,6 +1704,7 @@ static const struct gemini_pin_group gem
.num_pins = ARRAY_SIZE(gmii_gmac1_3516_pins),
/* Bring out RGMII on the GMAC1 pins */
.value = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
+ .driving_mask = GENMASK(19, 18),
},
{
.name = "pcigrp",
@@ -1700,6 +1712,7 @@ static const struct gemini_pin_group gem
.num_pins = ARRAY_SIZE(pci_3516_pins),
/* Conflict only with GPIO2 */
.value = PCI_PADS_ENABLE | PCI_CLK_PAD_ENABLE,
+ .driving_mask = GENMASK(23, 22),
},
{
.name = "lpcgrp",
@@ -2394,9 +2407,77 @@ static int gemini_pinconf_set(struct pin
return ret;
}
+static int gemini_pinconf_group_set(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ unsigned long *configs,
+ unsigned num_configs)
+{
+ struct gemini_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+ const struct gemini_pin_group *grp = NULL;
+ enum pin_config_param param;
+ u32 arg;
+ u32 val;
+ int i;
+
+ if (pmx->is_3512)
+ grp = &gemini_3512_pin_groups[selector];
+ if (pmx->is_3516)
+ grp = &gemini_3516_pin_groups[selector];
+
+ /* First figure out if this group supports configs */
+ if (!grp->driving_mask) {
+ dev_err(pmx->dev, "pin config group \"%s\" does "
+ "not support drive strength setting\n",
+ grp->name);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ switch (arg) {
+ case 4:
+ val = 0;
+ break;
+ case 8:
+ val = 1;
+ break;
+ case 12:
+ val = 2;
+ break;
+ case 16:
+ val = 3;
+ break;
+ default:
+ dev_err(pmx->dev,
+ "invalid drive strength %d mA\n",
+ arg);
+ return -ENOTSUPP;
+ }
+ val <<= (ffs(grp->driving_mask) - 1);
+ regmap_update_bits(pmx->map, GLOBAL_IODRIVE,
+ grp->driving_mask,
+ val);
+ dev_info(pmx->dev,
+ "set group %s to %d mA drive strength mask %08x val %08x\n",
+ grp->name, arg, grp->driving_mask, val);
+ break;
+ default:
+ dev_err(pmx->dev, "invalid config param %04x\n", param);
+ return -ENOTSUPP;
+ }
+ }
+
+ return 0;
+}
+
static const struct pinconf_ops gemini_pinconf_ops = {
.pin_config_get = gemini_pinconf_get,
.pin_config_set = gemini_pinconf_set,
+ .pin_config_group_set = gemini_pinconf_group_set,
.is_generic = true,
};

113
target/linux/gemini/patches-4.14/0012-ARM-dts-Add-ethernet-PHYs-to-the-a-bunch-of-Geminis.patch Normal file
View file

@ -0,0 +1,113 @@
From f0674df220f3da81c173025636a904b395cf8f8b Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sun, 19 Nov 2017 10:46:16 +0100
Subject: [PATCH 12/31] ARM: dts: Add ethernet PHYs to the a bunch of Geminis
These Gemini boards have Ethernet PHY on GPIO bit-banged
MDIO, clearly defined in the corresponding OpenWRT
ethernet patches since ages. Add them in accordance with
the OpenWRT patch so we can use them when we add ethernet
support.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/gemini-nas4220b.dts | 13 +++++++++++++
arch/arm/boot/dts/gemini-rut1xx.dts | 13 +++++++++++++
arch/arm/boot/dts/gemini-wbd111.dts | 13 +++++++++++++
arch/arm/boot/dts/gemini-wbd222.dts | 18 ++++++++++++++++++
4 files changed, 57 insertions(+)
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -64,6 +64,19 @@
};
};
+ mdio0: ethernet-phy {
+ compatible = "virtual,mdio-gpio";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
soc {
flash@30000000 {
status = "okay";
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -58,6 +58,19 @@
};
};
+ mdio0: ethernet-phy {
+ compatible = "virtual,mdio-gpio";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
soc {
flash@30000000 {
status = "okay";
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -69,6 +69,19 @@
};
};
+ mdio0: ethernet-phy {
+ compatible = "virtual,mdio-gpio";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
soc {
flash@30000000 {
status = "okay";
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -69,6 +69,24 @@
};
};
+ mdio0: ethernet-phy {
+ compatible = "virtual,mdio-gpio";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+
+ phy1: ethernet-phy@3 {
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
soc {
flash@30000000 {
status = "okay";

272
target/linux/gemini/patches-4.14/0013-ARM-dts-Add-basic-devicetree-for-D-Link-DNS-313.patch Normal file
View file

@ -0,0 +1,272 @@
From 2f08de94f207a4347053e1faa22c9a310c9c61b0 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Fri, 17 Nov 2017 16:36:32 +0100
Subject: [PATCH 13/31] ARM: dts: Add basic devicetree for D-Link DNS-313
This adds a basic device tree for the D-Link DNS-313
NAS enclosure. This device has a thermal sensor and a
fan so we add a thermal zone for the chassis in the
device tree based on information from the product.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/gemini-dlink-dns-313.dts | 241 +++++++++++++++++++++++++++++
2 files changed, 242 insertions(+)
create mode 100644 arch/arm/boot/dts/gemini-dlink-dns-313.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -185,6 +185,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5800-peach-pi.dtb
dtb-$(CONFIG_ARCH_GEMINI) += \
gemini-dlink-dir-685.dtb \
+ gemini-dlink-dns-313.dtb \
gemini-nas4220b.dtb \
gemini-rut1xx.dtb \
gemini-sq201.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ model = "D-Link DNS-313 1-Bay Network Storage Enclosure";
+ compatible = "dlink,dir-313", "cortina,gemini";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ /* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ };
+
+ chosen {
+ stdout-path = "uart0:19200n8";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button-esc {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <KEY_ESC>;
+ label = "reset";
+ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-power {
+ label = "dns313:blue:power";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led-disk-blue {
+ label = "dns313:blue:disk";
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-disk-green {
+ label = "dns313:green:disk";
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "ide-disk";
+ /* Ideally should activate while reading */
+ };
+ led-disk-red {
+ label = "dns313:red:disk";
+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ /* Ideally should activate while writing */
+ };
+ };
+
+ /*
+ * This is a ADDA AD0405GB-G73 fan @3000 and 6000 RPM.
+ */
+ fan0: gpio-fan {
+ compatible = "gpio-fan";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+ <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <2>;
+ #cooling-cells = <2>;
+ };
+
+
+ /* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
+ gpio-i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ g751: temperature-sensor@48 {
+ compatible = "gmt,g751";
+ reg = <0x48>;
+ #thermal-sensor-cells = <0>;
+ };
+ };
+
+ thermal-zones {
+ chassis-thermal {
+ /* Poll every 20 seconds */
+ polling-delay = <20000>;
+ /* Poll every 2nd second when cooling */
+ polling-delay-passive = <2000>;
+
+ thermal-sensors = <&g751>;
+
+ /* Tripping points from the fan.script in the rootfs */
+ trips {
+ chassis_alert0: chassis-alert0 {
+ /* At 43 degrees turn on low speed */
+ temperature = <43000>;
+ hysteresis = <3000>;
+ type = "active";
+ };
+ chassis_alert1: chassis-alert1 {
+ /* At 47 degrees turn on high speed */
+ temperature = <47000>;
+ hysteresis = <3000>;
+ type = "active";
+ };
+ chassis_crit: chassis-crit {
+ /* Just shut down at 60 degrees */
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&chassis_alert0>;
+ cooling-device = <&fan0 1 1>;
+ };
+ map1 {
+ trip = <&chassis_alert1>;
+ cooling-device = <&fan0 2 2>;
+ };
+ };
+ };
+ };
+
+ mdio0: ethernet-phy {
+ compatible = "virtual,mdio-gpio";
+ /* Uses MDC and MDIO */
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* This is a Realtek RTL8211B Gigabit ethernet transceiver */
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ soc {
+ flash@30000000 {
+ status = "okay";
+ /* 512KB of flash */
+ reg = <0x30000000 0x00080000>;
+
+ /*
+ * This "RedBoot" is the Storlink derivative.
+ */
+ partition@0 {
+ label = "RedBoot";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "MTD1";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "MTD2";
+ reg = <0x00060000 0x00020000>;
+ read-only;
+ };
+ };
+
+ syscon: syscon@40000000 {
+ pinctrl {
+ /*
+ */
+ gpio0_default_pins: pinctrl-gpio0 {
+ mux {
+ function = "gpio0";
+ groups =
+ /* Used by LEDs conflicts ICE */
+ "gpio0bgrp",
+ /* Used by ? conflicts ICE */
+ "gpio0cgrp",
+ /*
+ * Used by fan & G751, conflicts LPC,
+ * UART modem lines, SSP
+ */
+ "gpio0egrp",
+ /* Used by G751 */
+ "gpio0fgrp",
+ /* Used by MDIO */
+ "gpio0igrp";
+ };
+ };
+ gpio1_default_pins: pinctrl-gpio1 {
+ mux {
+ function = "gpio1";
+ /* Used by "reset" button */
+ groups = "gpio1dgrp";
+ };
+ };
+ };
+ };
+
+ sata: sata@46000000 {
+ /* The ROM uses this muxmode */
+ cortina,gemini-ata-muxmode = <3>;
+ cortina,gemini-enable-sata-bridge;
+ status = "okay";
+ };
+
+ gpio0: gpio@4d000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio0_default_pins>;
+ };
+
+ gpio1: gpio@4e000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_default_pins>;
+ };
+
+ ata@63000000 {
+ status = "okay";
+ };
+ };
+};

27
target/linux/gemini/patches-4.14/0014-ARM-dts-Flags-D-Link-DIR-685-I2C-bus-gpios.patch Normal file
View file

@ -0,0 +1,27 @@
From eed839dc713fdb7b2579dbfea41d676386b8259b Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sun, 10 Sep 2017 20:02:33 +0200
Subject: [PATCH 14/31] ARM: dts: Flags D-Link DIR-685 I2C bus gpios
These GPIOs are used in open drain mode, so make sure to
flag them as such. Use the new separate scl/sda line
GPIO bindings.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/gemini-dlink-dir-685.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -99,8 +99,8 @@
gpio-i2c {
compatible = "i2c-gpio";
/* Collides with ICE */
- gpios = <&gpio0 5 0>, /* SDA */
- <&gpio0 6 0>; /* SCL */
+ sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;

74
target/linux/gemini/patches-4.14/0015-ARM-dts-Add-PCI-to-WBD111-and-WBD222.patch Normal file
View file

@ -0,0 +1,74 @@
From dec551d2301f71a692ed1729a323c8259d36f849 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Wed, 11 Oct 2017 19:49:13 +0200
Subject: [PATCH 15/31] ARM: dts: Add PCI to WBD111 and WBD222
These two boards have mini-PCI card slots, so enable PCI
on both of them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/gemini-wbd111.dts | 22 ++++++++++++++++++++++
arch/arm/boot/dts/gemini-wbd222.dts | 22 ++++++++++++++++++++++
2 files changed, 44 insertions(+)
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -138,5 +138,27 @@
pinctrl-names = "default";
pinctrl-0 = <&gpio0_default_pins>;
};
+
+ pci@50000000 {
+ status = "okay";
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+ <0x4800 0 0 2 &pci_intc 1>,
+ <0x4800 0 0 3 &pci_intc 2>,
+ <0x4800 0 0 4 &pci_intc 3>,
+ <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+ <0x5000 0 0 2 &pci_intc 2>,
+ <0x5000 0 0 3 &pci_intc 3>,
+ <0x5000 0 0 4 &pci_intc 0>,
+ <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+ <0x5800 0 0 2 &pci_intc 3>,
+ <0x5800 0 0 3 &pci_intc 0>,
+ <0x5800 0 0 4 &pci_intc 1>,
+ <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+ <0x6000 0 0 2 &pci_intc 0>,
+ <0x6000 0 0 3 &pci_intc 1>,
+ <0x6000 0 0 4 &pci_intc 2>;
+ };
};
};
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -143,5 +143,27 @@
pinctrl-names = "default";
pinctrl-0 = <&gpio0_default_pins>;
};
+
+ pci@50000000 {
+ status = "okay";
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+ <0x4800 0 0 2 &pci_intc 1>,
+ <0x4800 0 0 3 &pci_intc 2>,
+ <0x4800 0 0 4 &pci_intc 3>,
+ <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+ <0x5000 0 0 2 &pci_intc 2>,
+ <0x5000 0 0 3 &pci_intc 3>,
+ <0x5000 0 0 4 &pci_intc 0>,
+ <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+ <0x5800 0 0 2 &pci_intc 3>,
+ <0x5800 0 0 3 &pci_intc 0>,
+ <0x5800 0 0 4 &pci_intc 1>,
+ <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+ <0x6000 0 0 2 &pci_intc 0>,
+ <0x6000 0 0 3 &pci_intc 1>,
+ <0x6000 0 0 4 &pci_intc 2>;
+ };
};
};

113
target/linux/gemini/patches-4.14/0016-ARM-dts-Add-TVE-TVC-and-ILI9322-panel-to-DIR-685.patch Normal file
View file

@ -0,0 +1,113 @@
From 9d3b968d13ba1eecaf22d5824cf8fd270c061534 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sat, 15 Jul 2017 21:02:06 +0200
Subject: [PATCH 16/31] ARM: dts: Add TVE/TVC and ILI9322 panel to DIR-685
This adds the TVE200/TVC TV-encoder and the Ilitek ILI9322 panel
to the DIR-685 device tree.
This brings graphics to this funky router and it is possible to
even run a console on its tiny screen.
Incidentally this requires us to disable the access to the
parallel (NOR) flash, as the communication pins to the panel
are shared with the flash memory.
To access the flash, a separate kernel with the panel disabled
and the flash enabled should be booted. The pin control selecting
whether to use the lines cannot be altered at runtime due to
hardware constraints.
Cc: David Lechner <david@lechnology.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/gemini-dlink-dir-685.dts | 63 +++++++++++++++++++++++++++++-
1 file changed, 62 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -45,6 +45,47 @@
};
};
+ vdisp: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "display-power";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+ /* Collides with LCD E */
+ gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Collides with IDE pins, that's cool (we do not use them) */
+ gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ /* Collides with pflash CE1, not so cool */
+ cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ panel: display@0 {
+ compatible = "dlink,dir-685-panel", "ilitek,ili9322";
+ reg = <0>;
+ /* 50 ns min period = 20 MHz */
+ spi-max-frequency = <20000000>;
+ spi-cpol; /* Clock active low */
+ vcc-supply = <&vdisp>;
+ iovcc-supply = <&vdisp>;
+ vci-supply = <&vdisp>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
led-wps {
@@ -115,7 +156,16 @@
soc {
flash@30000000 {
- status = "okay";
+ /*
+ * Flash access is by default disabled, because it
+ * collides with the Chip Enable signal for the display
+ * panel, that reuse the parallel flash Chip Select 1
+ * (CS1). Enabling flash makes graphics stop working.
+ *
+ * We might be able to hack around this by letting
+ * GPIO poke around in the flash controller registers.
+ */
+ /* status = "okay"; */
/* 32MB of flash */
reg = <0x30000000 0x02000000>;
@@ -242,5 +292,16 @@
ata@63000000 {
status = "okay";
};
+
+ display-controller@6a000000 {
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
};
};

88
target/linux/gemini/patches-4.14/0017-watchdog-gemini-ftwdt010-rename-DT-bindings.patch Normal file
View file

@ -0,0 +1,88 @@
From d73f6cc09bcbe258a72c06899215d1a3e8a7686d Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 16 Oct 2017 22:54:23 +0200
Subject: [PATCH 17/31] watchdog: gemini/ftwdt010: rename DT bindings
The device tree bindings are in two copies and also should be
consolidated into a single Faraday Technology FTWDT010
binding since we uncovered that this IP part is a standard
IP from Faraday.
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
.../bindings/watchdog/cortina,gemini-watchdog.txt | 17 -----------------
...{cortina,gemin-watchdog.txt => faraday,ftwdt010.txt} | 11 ++++++++---
2 files changed, 8 insertions(+), 20 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
rename Documentation/devicetree/bindings/watchdog/{cortina,gemin-watchdog.txt => faraday,ftwdt010.txt} (55%)
--- a/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Cortina Systems Gemini SoC Watchdog
-
-Required properties:
-- compatible : must be "cortina,gemini-watchdog"
-- reg : shall contain base register location and length
-- interrupts : shall contain the interrupt for the watchdog
-
-Optional properties:
-- timeout-sec : the default watchdog timeout in seconds.
-
-Example:
-
-watchdog@41000000 {
- compatible = "cortina,gemini-watchdog";
- reg = <0x41000000 0x1000>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
-};
--- a/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Cortina Systems Gemini SoC Watchdog
-
-Required properties:
-- compatible : must be "cortina,gemini-watchdog"
-- reg : shall contain base register location and length
-- interrupts : shall contain the interrupt for the watchdog
-
-Optional properties:
-- timeout-sec : the default watchdog timeout in seconds.
-
-Example:
-
-watchdog@41000000 {
- compatible = "cortina,gemini-watchdog";
- reg = <0x41000000 0x1000>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
-};
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.txt
@@ -0,0 +1,22 @@
+Faraday Technology FTWDT010 watchdog
+
+This is an IP part from Faraday Technology found in the Gemini
+SoCs and others.
+
+Required properties:
+- compatible : must be one of
+ "faraday,ftwdt010"
+ "cortina,gemini-watchdog", "faraday,ftwdt010"
+- reg : shall contain base register location and length
+- interrupts : shall contain the interrupt for the watchdog
+
+Optional properties:
+- timeout-sec : the default watchdog timeout in seconds.
+
+Example:
+
+watchdog@41000000 {
+ compatible = "faraday,ftwdt010";
+ reg = <0x41000000 0x1000>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};

527
target/linux/gemini/patches-4.14/0018-watchdog-gemini-ftwdt010-rename-driver-and-symbols.patch Normal file
View file

@ -0,0 +1,527 @@
From c197a5a04d658da490de08636066a6bdbebf16c5 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 16 Oct 2017 22:54:24 +0200
Subject: [PATCH 18/31] watchdog: gemini/ftwdt010: rename driver and symbols
This renames all the driver files and symbols for the Gemini
watchdog to FTWDT010 as it has been revealed that this IP block
is a generic watchdog timer from Faraday Technology used in
several SoC designs.
Select this driver by default for the Gemini, it is a sensible
driver to always have enabled.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
drivers/watchdog/Kconfig | 14 +--
drivers/watchdog/Makefile | 2 +-
drivers/watchdog/{gemini_wdt.c => ftwdt010_wdt.c} | 117 +++++++++++-----------
3 files changed, 68 insertions(+), 65 deletions(-)
rename drivers/watchdog/{gemini_wdt.c => ftwdt010_wdt.c} (50%)
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -321,16 +321,18 @@ config 977_WATCHDOG
Not sure? It's safe to say N.
-config GEMINI_WATCHDOG
- tristate "Gemini watchdog"
- depends on ARCH_GEMINI
+config FTWDT010_WATCHDOG
+ tristate "Faraday Technology FTWDT010 watchdog"
+ depends on ARM || COMPILE_TEST
select WATCHDOG_CORE
+ default ARCH_GEMINI
help
- Say Y here if to include support for the watchdog timer
- embedded in the Cortina Systems Gemini family of devices.
+ Say Y here if to include support for the Faraday Technology
+ FTWDT010 watchdog timer embedded in the Cortina Systems Gemini
+ family of devices.
To compile this driver as a module, choose M here: the
- module will be called gemini_wdt.
+ module will be called ftwdt010_wdt.
config IXP4XX_WATCHDOG
tristate "IXP4xx Watchdog"
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -46,7 +46,7 @@ obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.
obj-$(CONFIG_TWL4030_WATCHDOG) += twl4030_wdt.o
obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
obj-$(CONFIG_977_WATCHDOG) += wdt977.o
-obj-$(CONFIG_GEMINI_WATCHDOG) += gemini_wdt.o
+obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o
obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o
--- a/drivers/watchdog/gemini_wdt.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Watchdog driver for Cortina Systems Gemini SoC
- *
- * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
- *
- * Inspired by the out-of-tree drivers from OpenWRT:
- * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/bitops.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/watchdog.h>
-
-#define GEMINI_WDCOUNTER 0x0
-#define GEMINI_WDLOAD 0x4
-#define GEMINI_WDRESTART 0x8
-#define GEMINI_WDCR 0xC
-
-#define WDRESTART_MAGIC 0x5AB9
-
-#define WDCR_CLOCK_5MHZ BIT(4)
-#define WDCR_SYS_RST BIT(1)
-#define WDCR_ENABLE BIT(0)
-
-#define WDT_CLOCK 5000000 /* 5 MHz */
-
-struct gemini_wdt {
- struct watchdog_device wdd;
- struct device *dev;
- void __iomem *base;
-};
-
-static inline
-struct gemini_wdt *to_gemini_wdt(struct watchdog_device *wdd)
-{
- return container_of(wdd, struct gemini_wdt, wdd);
-}
-
-static int gemini_wdt_start(struct watchdog_device *wdd)
-{
- struct gemini_wdt *gwdt = to_gemini_wdt(wdd);
-
- writel(wdd->timeout * WDT_CLOCK, gwdt->base + GEMINI_WDLOAD);
- writel(WDRESTART_MAGIC, gwdt->base + GEMINI_WDRESTART);
- /* set clock before enabling */
- writel(WDCR_CLOCK_5MHZ | WDCR_SYS_RST,
- gwdt->base + GEMINI_WDCR);
- writel(WDCR_CLOCK_5MHZ | WDCR_SYS_RST | WDCR_ENABLE,
- gwdt->base + GEMINI_WDCR);
-
- return 0;
-}
-
-static int gemini_wdt_stop(struct watchdog_device *wdd)
-{
- struct gemini_wdt *gwdt = to_gemini_wdt(wdd);
-
- writel(0, gwdt->base + GEMINI_WDCR);
-
- return 0;
-}
-
-static int gemini_wdt_ping(struct watchdog_device *wdd)
-{
- struct gemini_wdt *gwdt = to_gemini_wdt(wdd);
-
- writel(WDRESTART_MAGIC, gwdt->base + GEMINI_WDRESTART);
-
- return 0;
-}
-
-static int gemini_wdt_set_timeout(struct watchdog_device *wdd,
- unsigned int timeout)
-{
- wdd->timeout = timeout;
- if (watchdog_active(wdd))
- gemini_wdt_start(wdd);
-
- return 0;
-}
-
-static irqreturn_t gemini_wdt_interrupt(int irq, void *data)
-{
- struct gemini_wdt *gwdt = data;
-
- watchdog_notify_pretimeout(&gwdt->wdd);
-
- return IRQ_HANDLED;
-}
-
-static const struct watchdog_ops gemini_wdt_ops = {
- .start = gemini_wdt_start,
- .stop = gemini_wdt_stop,
- .ping = gemini_wdt_ping,
- .set_timeout = gemini_wdt_set_timeout,
- .owner = THIS_MODULE,
-};
-
-static const struct watchdog_info gemini_wdt_info = {
- .options = WDIOF_KEEPALIVEPING
- | WDIOF_MAGICCLOSE
- | WDIOF_SETTIMEOUT,
- .identity = KBUILD_MODNAME,
-};
-
-
-static int gemini_wdt_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct resource *res;
- struct gemini_wdt *gwdt;
- unsigned int reg;
- int irq;
- int ret;
-
- gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL);
- if (!gwdt)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- gwdt->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(gwdt->base))
- return PTR_ERR(gwdt->base);
-
- irq = platform_get_irq(pdev, 0);
- if (!irq)
- return -EINVAL;
-
- gwdt->dev = dev;
- gwdt->wdd.info = &gemini_wdt_info;
- gwdt->wdd.ops = &gemini_wdt_ops;
- gwdt->wdd.min_timeout = 1;
- gwdt->wdd.max_timeout = 0xFFFFFFFF / WDT_CLOCK;
- gwdt->wdd.parent = dev;
-
- /*
- * If 'timeout-sec' unspecified in devicetree, assume a 13 second
- * default.
- */
- gwdt->wdd.timeout = 13U;
- watchdog_init_timeout(&gwdt->wdd, 0, dev);
-
- reg = readw(gwdt->base + GEMINI_WDCR);
- if (reg & WDCR_ENABLE) {
- /* Watchdog was enabled by the bootloader, disable it. */
- reg &= ~WDCR_ENABLE;
- writel(reg, gwdt->base + GEMINI_WDCR);
- }
-
- ret = devm_request_irq(dev, irq, gemini_wdt_interrupt, 0,
- "watchdog bark", gwdt);
- if (ret)
- return ret;
-
- ret = devm_watchdog_register_device(dev, &gwdt->wdd);
- if (ret) {
- dev_err(&pdev->dev, "failed to register watchdog\n");
- return ret;
- }
-
- /* Set up platform driver data */
- platform_set_drvdata(pdev, gwdt);
- dev_info(dev, "Gemini watchdog driver enabled\n");
-
- return 0;
-}
-
-static int __maybe_unused gemini_wdt_suspend(struct device *dev)
-{
- struct gemini_wdt *gwdt = dev_get_drvdata(dev);
- unsigned int reg;
-
- reg = readw(gwdt->base + GEMINI_WDCR);
- reg &= ~WDCR_ENABLE;
- writel(reg, gwdt->base + GEMINI_WDCR);
-
- return 0;
-}
-
-static int __maybe_unused gemini_wdt_resume(struct device *dev)
-{
- struct gemini_wdt *gwdt = dev_get_drvdata(dev);
- unsigned int reg;
-
- if (watchdog_active(&gwdt->wdd)) {
- reg = readw(gwdt->base + GEMINI_WDCR);
- reg |= WDCR_ENABLE;
- writel(reg, gwdt->base + GEMINI_WDCR);
- }
-
- return 0;
-}
-
-static const struct dev_pm_ops gemini_wdt_dev_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(gemini_wdt_suspend,
- gemini_wdt_resume)
-};
-
-#ifdef CONFIG_OF
-static const struct of_device_id gemini_wdt_match[] = {
- { .compatible = "cortina,gemini-watchdog" },
- {},
-};
-MODULE_DEVICE_TABLE(of, gemini_wdt_match);
-#endif
-
-static struct platform_driver gemini_wdt_driver = {
- .probe = gemini_wdt_probe,
- .driver = {
- .name = "gemini-wdt",
- .of_match_table = of_match_ptr(gemini_wdt_match),
- .pm = &gemini_wdt_dev_pm_ops,
- },
-};
-module_platform_driver(gemini_wdt_driver);
-MODULE_AUTHOR("Linus Walleij");
-MODULE_DESCRIPTION("Watchdog driver for Gemini");
-MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/watchdog/ftwdt010_wdt.c
@@ -0,0 +1,230 @@
+/*
+ * Watchdog driver for Faraday Technology FTWDT010
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Inspired by the out-of-tree drivers from OpenWRT:
+ * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/watchdog.h>
+
+#define FTWDT010_WDCOUNTER 0x0
+#define FTWDT010_WDLOAD 0x4
+#define FTWDT010_WDRESTART 0x8
+#define FTWDT010_WDCR 0xC
+
+#define WDRESTART_MAGIC 0x5AB9
+
+#define WDCR_CLOCK_5MHZ BIT(4)
+#define WDCR_SYS_RST BIT(1)
+#define WDCR_ENABLE BIT(0)
+
+#define WDT_CLOCK 5000000 /* 5 MHz */
+
+struct ftwdt010_wdt {
+ struct watchdog_device wdd;
+ struct device *dev;
+ void __iomem *base;
+};
+
+static inline
+struct ftwdt010_wdt *to_ftwdt010_wdt(struct watchdog_device *wdd)
+{
+ return container_of(wdd, struct ftwdt010_wdt, wdd);
+}
+
+static int ftwdt010_wdt_start(struct watchdog_device *wdd)
+{
+ struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd);
+
+ writel(wdd->timeout * WDT_CLOCK, gwdt->base + FTWDT010_WDLOAD);
+ writel(WDRESTART_MAGIC, gwdt->base + FTWDT010_WDRESTART);
+ /* set clock before enabling */
+ writel(WDCR_CLOCK_5MHZ | WDCR_SYS_RST,
+ gwdt->base + FTWDT010_WDCR);
+ writel(WDCR_CLOCK_5MHZ | WDCR_SYS_RST | WDCR_ENABLE,
+ gwdt->base + FTWDT010_WDCR);
+
+ return 0;
+}
+
+static int ftwdt010_wdt_stop(struct watchdog_device *wdd)
+{
+ struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd);
+
+ writel(0, gwdt->base + FTWDT010_WDCR);
+
+ return 0;
+}
+
+static int ftwdt010_wdt_ping(struct watchdog_device *wdd)
+{
+ struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd);
+
+ writel(WDRESTART_MAGIC, gwdt->base + FTWDT010_WDRESTART);
+
+ return 0;
+}
+
+static int ftwdt010_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ wdd->timeout = timeout;
+ if (watchdog_active(wdd))
+ ftwdt010_wdt_start(wdd);
+
+ return 0;
+}
+
+static irqreturn_t ftwdt010_wdt_interrupt(int irq, void *data)
+{
+ struct ftwdt010_wdt *gwdt = data;
+
+ watchdog_notify_pretimeout(&gwdt->wdd);
+
+ return IRQ_HANDLED;
+}
+
+static const struct watchdog_ops ftwdt010_wdt_ops = {
+ .start = ftwdt010_wdt_start,
+ .stop = ftwdt010_wdt_stop,
+ .ping = ftwdt010_wdt_ping,
+ .set_timeout = ftwdt010_wdt_set_timeout,
+ .owner = THIS_MODULE,
+};
+
+static const struct watchdog_info ftwdt010_wdt_info = {
+ .options = WDIOF_KEEPALIVEPING
+ | WDIOF_MAGICCLOSE
+ | WDIOF_SETTIMEOUT,
+ .identity = KBUILD_MODNAME,
+};
+
+
+static int ftwdt010_wdt_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct ftwdt010_wdt *gwdt;
+ unsigned int reg;
+ int irq;
+ int ret;
+
+ gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL);
+ if (!gwdt)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ gwdt->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(gwdt->base))
+ return PTR_ERR(gwdt->base);
+
+ irq = platform_get_irq(pdev, 0);
+ if (!irq)
+ return -EINVAL;
+
+ gwdt->dev = dev;
+ gwdt->wdd.info = &ftwdt010_wdt_info;
+ gwdt->wdd.ops = &ftwdt010_wdt_ops;
+ gwdt->wdd.min_timeout = 1;
+ gwdt->wdd.max_timeout = 0xFFFFFFFF / WDT_CLOCK;
+ gwdt->wdd.parent = dev;
+
+ /*
+ * If 'timeout-sec' unspecified in devicetree, assume a 13 second
+ * default.
+ */
+ gwdt->wdd.timeout = 13U;
+ watchdog_init_timeout(&gwdt->wdd, 0, dev);
+
+ reg = readw(gwdt->base + FTWDT010_WDCR);
+ if (reg & WDCR_ENABLE) {
+ /* Watchdog was enabled by the bootloader, disable it. */
+ reg &= ~WDCR_ENABLE;
+ writel(reg, gwdt->base + FTWDT010_WDCR);
+ }
+
+ ret = devm_request_irq(dev, irq, ftwdt010_wdt_interrupt, 0,
+ "watchdog bark", gwdt);
+ if (ret)
+ return ret;
+
+ ret = devm_watchdog_register_device(dev, &gwdt->wdd);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register watchdog\n");
+ return ret;
+ }
+
+ /* Set up platform driver data */
+ platform_set_drvdata(pdev, gwdt);
+ dev_info(dev, "FTWDT010 watchdog driver enabled\n");
+
+ return 0;
+}
+
+static int __maybe_unused ftwdt010_wdt_suspend(struct device *dev)
+{
+ struct ftwdt010_wdt *gwdt = dev_get_drvdata(dev);
+ unsigned int reg;
+
+ reg = readw(gwdt->base + FTWDT010_WDCR);
+ reg &= ~WDCR_ENABLE;
+ writel(reg, gwdt->base + FTWDT010_WDCR);
+
+ return 0;
+}
+
+static int __maybe_unused ftwdt010_wdt_resume(struct device *dev)
+{
+ struct ftwdt010_wdt *gwdt = dev_get_drvdata(dev);
+ unsigned int reg;
+
+ if (watchdog_active(&gwdt->wdd)) {
+ reg = readw(gwdt->base + FTWDT010_WDCR);
+ reg |= WDCR_ENABLE;
+ writel(reg, gwdt->base + FTWDT010_WDCR);
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops ftwdt010_wdt_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(ftwdt010_wdt_suspend,
+ ftwdt010_wdt_resume)
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id ftwdt010_wdt_match[] = {
+ { .compatible = "faraday,ftwdt010" },
+ { .compatible = "cortina,gemini-watchdog" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ftwdt010_wdt_match);
+#endif
+
+static struct platform_driver ftwdt010_wdt_driver = {
+ .probe = ftwdt010_wdt_probe,
+ .driver = {
+ .name = "ftwdt010-wdt",
+ .of_match_table = of_match_ptr(ftwdt010_wdt_match),
+ .pm = &ftwdt010_wdt_dev_pm_ops,
+ },
+};
+module_platform_driver(ftwdt010_wdt_driver);
+MODULE_AUTHOR("Linus Walleij");
+MODULE_DESCRIPTION("Watchdog driver for Faraday Technology FTWDT010");
+MODULE_LICENSE("GPL");

93
target/linux/gemini/patches-4.14/0019-watchdog-ftwdt010-Make-interrupt-optional.patch Normal file
View file

@ -0,0 +1,93 @@
From 4347a0b0699989b889857c9d4ccfbce339859f13 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 16 Oct 2017 22:54:25 +0200
Subject: [PATCH 19/31] watchdog: ftwdt010: Make interrupt optional
The Moxart does not appear to be using the interrupt from the
watchdog timer, maybe it's not even routed, so as to support
more architectures with this driver, make the interrupt
optional.
While we are at it: actually enable the use of the interrupt
if present by setting the right bit in the control register
and define the missing control register bits.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
drivers/watchdog/ftwdt010_wdt.c | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
--- a/drivers/watchdog/ftwdt010_wdt.c
+++ b/drivers/watchdog/ftwdt010_wdt.c
@@ -30,6 +30,8 @@
#define WDRESTART_MAGIC 0x5AB9
#define WDCR_CLOCK_5MHZ BIT(4)
+#define WDCR_WDEXT BIT(3)
+#define WDCR_WDINTR BIT(2)
#define WDCR_SYS_RST BIT(1)
#define WDCR_ENABLE BIT(0)
@@ -39,6 +41,7 @@ struct ftwdt010_wdt {
struct watchdog_device wdd;
struct device *dev;
void __iomem *base;
+ bool has_irq;
};
static inline
@@ -50,14 +53,17 @@ struct ftwdt010_wdt *to_ftwdt010_wdt(str
static int ftwdt010_wdt_start(struct watchdog_device *wdd)
{
struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd);
+ u32 enable;
writel(wdd->timeout * WDT_CLOCK, gwdt->base + FTWDT010_WDLOAD);
writel(WDRESTART_MAGIC, gwdt->base + FTWDT010_WDRESTART);
/* set clock before enabling */
- writel(WDCR_CLOCK_5MHZ | WDCR_SYS_RST,
- gwdt->base + FTWDT010_WDCR);
- writel(WDCR_CLOCK_5MHZ | WDCR_SYS_RST | WDCR_ENABLE,
- gwdt->base + FTWDT010_WDCR);
+ enable = WDCR_CLOCK_5MHZ | WDCR_SYS_RST;
+ writel(enable, gwdt->base + FTWDT010_WDCR);
+ if (gwdt->has_irq)
+ enable |= WDCR_WDINTR;
+ enable |= WDCR_ENABLE;
+ writel(enable, gwdt->base + FTWDT010_WDCR);
return 0;
}
@@ -133,10 +139,6 @@ static int ftwdt010_wdt_probe(struct pla
if (IS_ERR(gwdt->base))
return PTR_ERR(gwdt->base);
- irq = platform_get_irq(pdev, 0);
- if (!irq)
- return -EINVAL;
-
gwdt->dev = dev;
gwdt->wdd.info = &ftwdt010_wdt_info;
gwdt->wdd.ops = &ftwdt010_wdt_ops;
@@ -158,10 +160,14 @@ static int ftwdt010_wdt_probe(struct pla
writel(reg, gwdt->base + FTWDT010_WDCR);
}
- ret = devm_request_irq(dev, irq, ftwdt010_wdt_interrupt, 0,
- "watchdog bark", gwdt);
- if (ret)
- return ret;
+ irq = platform_get_irq(pdev, 0);
+ if (irq) {
+ ret = devm_request_irq(dev, irq, ftwdt010_wdt_interrupt, 0,
+ "watchdog bark", gwdt);
+ if (ret)
+ return ret;
+ gwdt->has_irq = true;
+ }
ret = devm_watchdog_register_device(dev, &gwdt->wdd);
if (ret) {

113
target/linux/gemini/patches-4.14/0020-soc-Add-SoC-driver-for-Gemini.patch Normal file
View file

@ -0,0 +1,113 @@
From b0a88a861b036124ef2d6acfe6dd87cfde63e750 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Fri, 22 Dec 2017 00:19:08 +0100
Subject: [PATCH 20/31] soc: Add SoC driver for Gemini
This adds an SoC driver for the Gemini. Currently there
is only one thing not fitting into any other framework,
and that is the bus arbitration setting.
All Gemini vendor trees seem to be setting this register to
exactly the same arbitration so we just add a small code
snippet to do this at subsys_init() time before any other
drivers kick in.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/soc/Makefile | 1 +
drivers/soc/gemini/Makefile | 2 ++
drivers/soc/gemini/soc-gemini.c | 71 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 74 insertions(+)
create mode 100644 drivers/soc/gemini/Makefile
create mode 100644 drivers/soc/gemini/soc-gemini.c
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -9,6 +9,7 @@ obj-y += bcm/
obj-$(CONFIG_ARCH_DOVE) += dove/
obj-$(CONFIG_MACH_DOVE) += dove/
obj-y += fsl/
+obj-$(CONFIG_ARCH_GEMINI) += gemini/
obj-$(CONFIG_ARCH_MXC) += imx/
obj-$(CONFIG_SOC_XWAY) += lantiq/
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
--- /dev/null
+++ b/drivers/soc/gemini/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y += soc-gemini.o
--- /dev/null
+++ b/drivers/soc/gemini/soc-gemini.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Linaro Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+
+#define GLOBAL_WORD_ID 0x00
+#define GEMINI_GLOBAL_ARB1_CTRL 0x2c
+#define GEMINI_ARB1_BURST_MASK GENMASK(21, 16)
+#define GEMINI_ARB1_BURST_SHIFT 16
+/* These all define the priority on the BUS2 backplane */
+#define GEMINI_ARB1_PRIO_MASK GENMASK(9, 0)
+#define GEMINI_ARB1_DMAC_HIGH_PRIO BIT(0)
+#define GEMINI_ARB1_IDE_HIGH_PRIO BIT(1)
+#define GEMINI_ARB1_RAID_HIGH_PRIO BIT(2)
+#define GEMINI_ARB1_SECURITY_HIGH_PRIO BIT(3)
+#define GEMINI_ARB1_GMAC0_HIGH_PRIO BIT(4)
+#define GEMINI_ARB1_GMAC1_HIGH_PRIO BIT(5)
+#define GEMINI_ARB1_USB0_HIGH_PRIO BIT(6)
+#define GEMINI_ARB1_USB1_HIGH_PRIO BIT(7)
+#define GEMINI_ARB1_PCI_HIGH_PRIO BIT(8)
+#define GEMINI_ARB1_TVE_HIGH_PRIO BIT(9)
+
+#define GEMINI_DEFAULT_BURST_SIZE 0x20
+#define GEMINI_DEFAULT_PRIO (GEMINI_ARB1_GMAC0_HIGH_PRIO | \
+ GEMINI_ARB1_GMAC1_HIGH_PRIO)
+
+static int __init gemini_soc_init(void)
+{
+ struct regmap *map;
+ u32 rev;
+ u32 val;
+ int ret;
+
+ /* Multiplatform guard, only proceed on Gemini */
+ if (!of_machine_is_compatible("cortina,gemini"))
+ return 0;
+
+ map = syscon_regmap_lookup_by_compatible("cortina,gemini-syscon");
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+ ret = regmap_read(map, GLOBAL_WORD_ID, &rev);
+ if (ret)
+ return ret;
+
+ val = (GEMINI_DEFAULT_BURST_SIZE << GEMINI_ARB1_BURST_SHIFT) |
+ GEMINI_DEFAULT_PRIO;
+
+ /* Set up system arbitration */
+ regmap_update_bits(map,
+ GEMINI_GLOBAL_ARB1_CTRL,
+ GEMINI_ARB1_BURST_MASK | GEMINI_ARB1_PRIO_MASK,
+ val);
+
+ pr_info("Gemini SoC %04x revision %02x, set arbitration %08x\n",
+ rev >> 8, rev & 0xff, val);
+
+ return 0;
+}
+subsys_initcall(gemini_soc_init);

119
target/linux/gemini/patches-4.14/0021-net-ethernet-Add-DT-bindings-for-the-Gemini-ethernet.patch Normal file
View file

@ -0,0 +1,119 @@
From 49bc597009f52ec8970269f6201d3ed415a844ee Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Fri, 12 Jan 2018 22:34:23 +0100
Subject: [PATCH 21/31] net: ethernet: Add DT bindings for the Gemini ethernet
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This adds the device tree bindings for the Gemini ethernet
controller. It is pretty straight-forward, using standard
bindings and modelling the two child ports as child devices
under the parent ethernet controller device.
Cc: devicetree@vger.kernel.org
Cc: Tobias Waldvogel <tobias.waldvogel@gmail.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
.../bindings/net/cortina,gemini-ethernet.txt | 92 ++++++++++++++++++++++
1 file changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
@@ -0,0 +1,92 @@
+Cortina Systems Gemini Ethernet Controller
+==========================================
+
+This ethernet controller is found in the Gemini SoC family:
+StorLink SL3512 and SL3516, also known as Cortina Systems
+CS3512 and CS3516.
+
+Required properties:
+- compatible: must be "cortina,gemini-ethernet"
+- reg: must contain the global registers and the V-bit and A-bit
+ memory areas, in total three register sets.
+- syscon: a phandle to the system controller
+- #address-cells: must be specified, must be <1>
+- #size-cells: must be specified, must be <1>
+- ranges: should be state like this giving a 1:1 address translation
+ for the subnodes
+
+The subnodes represents the two ethernet ports in this device.
+They are not independent of each other since they share resources
+in the parent node, and are thus children.
+
+Required subnodes:
+- port0: contains the resources for ethernet port 0
+- port1: contains the resources for ethernet port 1
+
+Required subnode properties:
+- compatible: must be "cortina,gemini-ethernet-port"
+- reg: must contain two register areas: the DMA/TOE memory and
+ the GMAC memory area of the port
+- interrupts: should contain the interrupt line of the port.
+ this is nominally a level interrupt active high.
+- resets: this must provide an SoC-integrated reset line for
+ the port.
+- clocks: this should contain a handle to the PCLK clock for
+ clocking the silicon in this port
+- clock-names: must be "PCLK"
+
+Optional subnode properties:
+- phy-mode: see ethernet.txt
+- phy-handle: see ethernet.txt
+
+Example:
+
+mdio-bus {
+ (...)
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@3 {
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+};
+
+
+ethernet@60000000 {
+ compatible = "cortina,gemini-ethernet";
+ reg = <0x60000000 0x4000>, /* Global registers, queue */
+ <0x60004000 0x2000>, /* V-bit */
+ <0x60006000 0x2000>; /* A-bit */
+ syscon = <&syscon>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gmac0: ethernet-port@0 {
+ compatible = "cortina,gemini-ethernet-port";
+ reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+ <0x6000a000 0x2000>; /* Port 0 GMAC */
+ interrupt-parent = <&intcon>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&syscon GEMINI_RESET_GMAC0>;
+ clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+ clock-names = "PCLK";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+
+ gmac1: ethernet-port@1 {
+ compatible = "cortina,gemini-ethernet-port";
+ reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+ <0x6000e000 0x2000>; /* Port 1 GMAC */
+ interrupt-parent = <&intcon>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&syscon GEMINI_RESET_GMAC1>;
+ clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+ clock-names = "PCLK";
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+};

3661
target/linux/gemini/patches-4.14/0022-net-ethernet-Add-a-driver-for-Gemini-gigabit-etherne.patch Normal file
View file

File diff suppressed because it is too large Load diff

74
target/linux/gemini/patches-4.14/0023-ARM-dts-Add-ethernet-to-the-Gemini-SoC.patch Normal file
View file

@ -0,0 +1,74 @@
From 860005c1a2f16aaa33458a7d80c9728b710ae292 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 6 Nov 2017 00:05:28 +0100
Subject: [PATCH 23/31] ARM: dts: Add ethernet to the Gemini SoC
This adds the Gemini ethernet node to the Gemini SoC.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/gemini.dtsi | 44 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 43 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -114,9 +114,16 @@
};
};
gmii_default_pins: pinctrl-gmii {
+ /*
+ * Only activate GMAC0 by default since
+ * GMAC1 will overlap with 8 GPIO lines
+ * gpio2a, gpio2b. Overlay groups with
+ * "gmii_gmac0_grp", "gmii_gmac1_grp" for
+ * both ethernet interfaces.
+ */
mux {
function = "gmii";
- groups = "gmiigrp";
+ groups = "gmii_gmac0_grp";
};
};
pci_default_pins: pinctrl-pci {
@@ -316,6 +323,41 @@
};
};
+ ethernet@60000000 {
+ compatible = "cortina,gemini-ethernet";
+ reg = <0x60000000 0x4000>, /* Global registers, queue */
+ <0x60004000 0x2000>, /* V-bit */
+ <0x60006000 0x2000>; /* A-bit */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmii_default_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gmac0: ethernet-port@0 {
+ compatible = "cortina,gemini-ethernet-port";
+ reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+ <0x6000a000 0x2000>; /* Port 0 GMAC */
+ interrupt-parent = <&intcon>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&syscon GEMINI_RESET_GMAC0>;
+ clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+ clock-names = "PCLK";
+ };
+
+ gmac1: ethernet-port@1 {
+ compatible = "cortina,gemini-ethernet-port";
+ reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+ <0x6000e000 0x2000>; /* Port 1 GMAC */
+ interrupt-parent = <&intcon>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&syscon GEMINI_RESET_GMAC1>;
+ clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+ clock-names = "PCLK";
+ };
+ };
+
ata@63000000 {
compatible = "cortina,gemini-pata", "faraday,ftide010";
reg = <0x63000000 0x1000>;

30
target/linux/gemini/patches-4.14/0024-net-gemini-Depend-on-HAS_IOMEM.patch Normal file
View file

@ -0,0 +1,30 @@
From e0a7c7762e3a81e908bcca4176139ea9755d0985 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sun, 21 Jan 2018 14:15:41 +0100
Subject: [PATCH 24/31] net: gemini: Depend on HAS_IOMEM
The zeroday builder notices that since Usermode Linux does not
have IO memory, the build fails for them when selecting everything
it can enable.
As the driver is clearly using memory-mapped registers to access
the network adapter, we add depends on HAS_IOMEM to solve this
problem.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/cortina/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ethernet/cortina/Kconfig
+++ b/drivers/net/ethernet/cortina/Kconfig
@@ -14,6 +14,7 @@ if NET_VENDOR_CORTINA
config GEMINI_ETHERNET
tristate "Gemini Gigabit Ethernet support"
depends on OF
+ depends on HAS_IOMEM
select PHYLIB
select CRC32
---help---

36
target/linux/gemini/patches-4.14/0025-ARM-dts-Set-D-Link-DNS-313-SATA-to-muxmode-0.patch Normal file
View file

@ -0,0 +1,36 @@
From f30cc6acdeb834be1a6ae54d47c84b2f8012b83d Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Thu, 18 Jan 2018 14:36:21 +0100
Subject: [PATCH 25/31] ARM: dts: Set D-Link DNS-313 SATA to muxmode 0
This stops the driver from trying to probe the ATA slave
interface. The vendor code enables the slave interface
but the driver in the vendor tree does not make use of
it.
Setting it to muxmode 0 disables the slave interface:
the hardware only has the master interface connected
to the one harddrive slot anyways.
Without this change booting takes excessive time, so it
is very annoying to end users.
Fixes: dd5c0561db75 ("ARM: dts: Add basic devicetree for D-Link DNS-313")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ARM SoC folks: please apply this for fixes for v4.16.
---
arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -219,7 +219,7 @@
sata: sata@46000000 {
/* The ROM uses this muxmode */
- cortina,gemini-ata-muxmode = <3>;
+ cortina,gemini-ata-muxmode = <0>;
cortina,gemini-enable-sata-bridge;
status = "okay";
};

80
target/linux/gemini/patches-4.14/0026-power-gemini-poweroff-Avoid-spurious-poweroff.patch Normal file
View file

@ -0,0 +1,80 @@
From da443bc125265cae24a0e5f7d1c7bba196a9319f Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Thu, 22 Feb 2018 08:34:35 +0100
Subject: [PATCH 26/31] power: gemini-poweroff: Avoid spurious poweroff
On the D-Link DIR-685 we get spurious poweroff from
infrared. Since that block (CIR) doesn't even have a
driver this can be safely ignored, we can revisit this
code once we have a device supporting CIR.
On the D-Link DNS-313 we get spurious poweroff from
the power button. This appears to be an initialization
issue: we need to enable the block (start the state
machine) before we clear any dangling IRQ.
This patch fixes both issues.
Fixes: f7a388d6cd1c ("power: reset: Add a driver for the Gemini poweroff")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Fix both issues and rename the patch.
- Proper commit message with specifics.
---
drivers/power/reset/gemini-poweroff.c | 30 +++++++++++++++++-------------
1 file changed, 17 insertions(+), 13 deletions(-)
--- a/drivers/power/reset/gemini-poweroff.c
+++ b/drivers/power/reset/gemini-poweroff.c
@@ -47,8 +47,12 @@ static irqreturn_t gemini_powerbutton_in
val &= 0x70U;
switch (val) {
case GEMINI_STAT_CIR:
- dev_info(gpw->dev, "infrared poweroff\n");
- orderly_poweroff(true);
+ /*
+ * We do not yet have a driver for the infrared
+ * controller so it can cause spurious poweroff
+ * events. Ignore those for now.
+ */
+ dev_info(gpw->dev, "infrared poweroff - ignored\n");
break;
case GEMINI_STAT_RTC:
dev_info(gpw->dev, "RTC poweroff\n");
@@ -116,7 +120,17 @@ static int gemini_poweroff_probe(struct
return -ENODEV;
}
- /* Clear the power management IRQ */
+ /*
+ * Enable the power controller. This is crucial on Gemini
+ * systems: if this is not done, pressing the power button
+ * will result in unconditional poweroff without any warning.
+ * This makes the kernel handle the poweroff.
+ */
+ val = readl(gpw->base + GEMINI_PWC_CTRLREG);
+ val |= GEMINI_CTRL_ENABLE;
+ writel(val, gpw->base + GEMINI_PWC_CTRLREG);
+
+ /* Now that the state machine is active, clear the IRQ */
val = readl(gpw->base + GEMINI_PWC_CTRLREG);
val |= GEMINI_CTRL_IRQ_CLR;
writel(val, gpw->base + GEMINI_PWC_CTRLREG);
@@ -129,16 +143,6 @@ static int gemini_poweroff_probe(struct
pm_power_off = gemini_poweroff;
gpw_poweroff = gpw;
- /*
- * Enable the power controller. This is crucial on Gemini
- * systems: if this is not done, pressing the power button
- * will result in unconditional poweroff without any warning.
- * This makes the kernel handle the poweroff.
- */
- val = readl(gpw->base + GEMINI_PWC_CTRLREG);
- val |= GEMINI_CTRL_ENABLE;
- writel(val, gpw->base + GEMINI_PWC_CTRLREG);
-
dev_info(dev, "Gemini poweroff driver registered\n");
return 0;

65
target/linux/gemini/patches-4.14/0027-usb-host-add-DT-bindings-for-faraday-fotg2.patch Normal file
View file

@ -0,0 +1,65 @@
From 3699f119ff8da021fe7a1759e98e38ca88fa6766 Mon Sep 17 00:00:00 2001
From: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Date: Wed, 8 Feb 2017 21:00:09 +0100
Subject: [PATCH 27/31] usb: host: add DT bindings for faraday fotg2
This adds device tree bindings for the Faraday FOTG2
dual-mode host controller.
Cc: devicetree@vger.kernel.org
Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v3:
- Change compatible to "faraday,fotg210" as the name of the
hardware block.
- Add an elaborate SoC-specific compatible string for the
Cortina Systems Gemini so that SoC-specific features can
be enabled.
- Add cortina,gemini-mini-b to indicate a Gemini PHY with
a Mini-B adapter connected.
- Indicated that the Gemini version can handle "wakeup-source".
- Add optional IP block clock.
---
.../devicetree/bindings/usb/faraday,fotg210.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/faraday,fotg210.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
@@ -0,0 +1,35 @@
+Faraday FOTG Host controller
+
+This OTG-capable USB host controller is found in Cortina Systems
+Gemini and other SoC products.
+
+Required properties:
+- compatible: should be one of:
+ "faraday,fotg210"
+ "cortina,gemini-usb", "faraday,fotg210"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+
+Optional properties:
+- clocks: should contain the IP block clock
+- clock-names: should be "PCLK" for the IP block clock
+
+Required properties for "cortina,gemini-usb" compatible:
+- syscon: a phandle to the system controller to access PHY registers
+
+Optional properties for "cortina,gemini-usb" compatible:
+- cortina,gemini-mini-b: boolean property that indicates that a Mini-B
+ OTH connector is in use
+- wakeup-source: see power/wakeup-source.txt
+
+Example for Gemini:
+
+usb@68000000 {
+ compatible = "cortina,gemini-usb", "faraday,fotg210";
+ reg = <0x68000000 0x1000>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cc 12>;
+ clock-names = "PCLK";
+ syscon = <&syscon>;
+ wakeup-source;
+};

61
target/linux/gemini/patches-4.14/0028-usb-host-fotg2-add-device-tree-probing.patch Normal file
View file

@ -0,0 +1,61 @@
From 5662c553e89ac4179ec2a7a94a342ba3e5d78cf7 Mon Sep 17 00:00:00 2001
From: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Date: Thu, 9 Feb 2017 15:20:49 +0100
Subject: [PATCH 28/31] usb: host: fotg2: add device tree probing
Add device tree probing to the fotg2 driver.
Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Change compatible to "faraday,fotg210" simply.
---
drivers/usb/host/fotg210-hcd.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -23,6 +23,7 @@
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/device.h>
#include <linux/dmapool.h>
#include <linux/kernel.h>
@@ -5600,6 +5601,15 @@ static int fotg210_hcd_probe(struct plat
if (usb_disabled())
return -ENODEV;
+ /* Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+
+ retval = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (retval)
+ goto fail_create_hcd;
+
pdev->dev.power.power_state = PMSG_ON;
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -5676,9 +5686,18 @@ static int fotg210_hcd_remove(struct pla
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id fotg210_of_match[] = {
+ { .compatible = "faraday,fotg210" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, fotg210_of_match);
+#endif
+
static struct platform_driver fotg210_hcd_driver = {
.driver = {
.name = "fotg210-hcd",
+ .of_match_table = of_match_ptr(fotg210_of_match),
},
.probe = fotg210_hcd_probe,
.remove = fotg210_hcd_remove,

99
target/linux/gemini/patches-4.14/0029-usb-host-fotg2-add-silicon-clock-handling.patch Normal file
View file

@ -0,0 +1,99 @@
From acd19633751f14607ccd76f9dfde5bde7935766c Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Fri, 21 Apr 2017 20:46:12 +0200
Subject: [PATCH 29/31] usb: host: fotg2: add silicon clock handling
When used in a system with software-controller silicon clocks,
the FOTG210 needs to grab, prepare and enable the clock.
This is needed on for example the Cortina Gemini, where the
platform will by default gate off the clock unless the
peripheral (in this case the USB driver) grabs and enables
the clock.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/usb/host/fotg210-hcd.c | 26 ++++++++++++++++++++++----
drivers/usb/host/fotg210.h | 3 +++
2 files changed, 25 insertions(+), 4 deletions(-)
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -45,6 +45,7 @@
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/clk.h>
#include <asm/byteorder.h>
#include <asm/irq.h>
@@ -5635,7 +5636,7 @@ static int fotg210_hcd_probe(struct plat
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(hcd->regs)) {
retval = PTR_ERR(hcd->regs);
- goto failed;
+ goto failed_put_hcd;
}
hcd->rsrc_start = res->start;
@@ -5645,22 +5646,35 @@ static int fotg210_hcd_probe(struct plat
fotg210->caps = hcd->regs;
+ /* It's OK not to supply this clock */
+ fotg210->pclk = clk_get(dev, "PCLK");
+ if (!IS_ERR(fotg210->pclk)) {
+ retval = clk_prepare_enable(fotg210->pclk);
+ if (retval) {
+ dev_err(dev, "failed to enable PCLK\n");
+ goto failed_dis_clk;
+ }
+ }
+
retval = fotg210_setup(hcd);
if (retval)
- goto failed;
+ goto failed_dis_clk;
fotg210_init(fotg210);
retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (retval) {
dev_err(dev, "failed to add hcd with err %d\n", retval);
- goto failed;
+ goto failed_dis_clk;
}
device_wakeup_enable(hcd->self.controller);
return retval;
-failed:
+failed_dis_clk:
+ if (!IS_ERR(fotg210->pclk))
+ clk_disable_unprepare(fotg210->pclk);
+failed_put_hcd:
usb_put_hcd(hcd);
fail_create_hcd:
dev_err(dev, "init %s fail, %d\n", dev_name(dev), retval);
@@ -5676,6 +5690,10 @@ static int fotg210_hcd_remove(struct pla
{
struct device *dev = &pdev->dev;
struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
+
+ if (!IS_ERR(fotg210->pclk))
+ clk_disable_unprepare(fotg210->pclk);
if (!hcd)
return 0;
--- a/drivers/usb/host/fotg210.h
+++ b/drivers/usb/host/fotg210.h
@@ -182,6 +182,9 @@ struct fotg210_hcd { /* one per contro
# define COUNT(x)
#endif
+ /* silicon clock */
+ struct clk *pclk;
+
/* debug files */
struct dentry *debug_dir;
};

131
target/linux/gemini/patches-4.14/0030-usb-host-fotg2-add-Gemini-specific-handling.patch Normal file
View file

@ -0,0 +1,131 @@
From e8ede0f62b39a3d3b06ae3dc04a74680a1f0a64b Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Fri, 21 Apr 2017 22:19:00 +0200
Subject: [PATCH 30/31] usb: host: fotg2: add Gemini-specific handling
The Cortina Systems Gemini has bolted on a PHY inside the
silicon that can be handled by six bits in a MISC register in
the system controller.
If we are running on Gemini, look up a syscon regmap through
a phandle and enable VBUS and optionally the Mini-B connector.
If the device is flagged as "wakeup-source" using the standard
DT bindings, we also enable this in the global controller for
respective port.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/usb/host/Kconfig | 1 +
drivers/usb/host/fotg210-hcd.c | 76 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 77 insertions(+)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -375,6 +375,7 @@ config USB_ISP1362_HCD
config USB_FOTG210_HCD
tristate "FOTG210 HCD support"
depends on USB && HAS_DMA && HAS_IOMEM
+ select MFD_SYSCON
---help---
Faraday FOTG210 is an OTG controller which can be configured as
an USB2.0 host. It is designed to meet USB2.0 EHCI specification
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -46,6 +46,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/bitops.h>
+/* For Cortina Gemini */
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <asm/byteorder.h>
#include <asm/irq.h>
@@ -5583,6 +5587,72 @@ static void fotg210_init(struct fotg210_
iowrite32(value, &fotg210->regs->otgcsr);
}
+/*
+ * Gemini-specific initialization function, only executed on the
+ * Gemini SoC using the global misc control register.
+ */
+#define GEMINI_GLOBAL_MISC_CTRL 0x30
+#define GEMINI_MISC_USB0_WAKEUP BIT(14)
+#define GEMINI_MISC_USB1_WAKEUP BIT(15)
+#define GEMINI_MISC_USB0_VBUS_ON BIT(22)
+#define GEMINI_MISC_USB1_VBUS_ON BIT(23)
+#define GEMINI_MISC_USB0_MINI_B BIT(29)
+#define GEMINI_MISC_USB1_MINI_B BIT(30)
+
+static int fotg210_gemini_init(struct device *dev, struct usb_hcd *hcd)
+{
+ struct device_node *np = dev->of_node;
+ struct regmap *map;
+ bool mini_b;
+ bool wakeup;
+ u32 mask, val;
+ int ret;
+
+ map = syscon_regmap_lookup_by_phandle(np, "syscon");
+ if (IS_ERR(map)) {
+ dev_err(dev, "no syscon\n");
+ return PTR_ERR(map);
+ }
+ mini_b = of_property_read_bool(np, "cortina,gemini-mini-b");
+ wakeup = of_property_read_bool(np, "wakeup-source");
+
+ /*
+ * Figure out if this is USB0 or USB1 by simply checking the
+ * physical base address.
+ */
+ mask = 0;
+ if (hcd->rsrc_start == 0x69000000) {
+ val = GEMINI_MISC_USB1_VBUS_ON;
+ if (mini_b)
+ val |= GEMINI_MISC_USB1_MINI_B;
+ else
+ mask |= GEMINI_MISC_USB1_MINI_B;
+ if (wakeup)
+ val |= GEMINI_MISC_USB1_WAKEUP;
+ else
+ mask |= GEMINI_MISC_USB1_WAKEUP;
+ } else {
+ val = GEMINI_MISC_USB0_VBUS_ON;
+ if (mini_b)
+ val |= GEMINI_MISC_USB0_MINI_B;
+ else
+ mask |= GEMINI_MISC_USB0_MINI_B;
+ if (wakeup)
+ val |= GEMINI_MISC_USB0_WAKEUP;
+ else
+ mask |= GEMINI_MISC_USB0_WAKEUP;
+ }
+
+ ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, mask, val);
+ if (ret) {
+ dev_err(dev, "failed to initialize Gemini PHY\n");
+ return ret;
+ }
+
+ dev_info(dev, "initialized Gemini PHY\n");
+ return 0;
+}
+
/**
* fotg210_hcd_probe - initialize faraday FOTG210 HCDs
*
@@ -5662,6 +5732,12 @@ static int fotg210_hcd_probe(struct plat
fotg210_init(fotg210);
+ if (of_device_is_compatible(dev->of_node, "cortina,gemini-usb")) {
+ retval = fotg210_gemini_init(dev, hcd);
+ if (retval)
+ goto failed_dis_clk;
+ }
+
retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (retval) {
dev_err(dev, "failed to add hcd with err %d\n", retval);

178
target/linux/gemini/patches-4.14/0031-ARM-dts-Add-the-FOTG210-USB-host-to-Gemini.patch Normal file
View file

@ -0,0 +1,178 @@
From dd62aee5d2d24199e71e745544e49a1a8b3c6f7a Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Fri, 21 Apr 2017 20:50:22 +0200
Subject: [PATCH 31/31] ARM: dts: Add the FOTG210 USB host to Gemini
This adds the FOTG210 USB host controller to the Gemini
device trees. In the main SoC DTSI it is flagged as disabled
and then it is selectively enabled on the devices that utilize
it (these per-platform enablements are done on the out-of-tree
OpenWrt patch set). It is not enabled on the Itian SquareOne
NAS/router since this instead has a VIA host controller
soldered on the PCI port, and can gate off these USB host
controllers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
USB maintainers: I will merge this through the ARM SoC tree,
the patch is only included in the series for context.
---
arch/arm/boot/dts/gemini-dlink-dir-685.dts | 8 ++++++++
arch/arm/boot/dts/gemini-nas4220b.dts | 8 ++++++++
arch/arm/boot/dts/gemini-rut1xx.dts | 20 ++++++++++++++++++++
arch/arm/boot/dts/gemini-wbd111.dts | 20 ++++++++++++++++++++
arch/arm/boot/dts/gemini-wbd222.dts | 21 +++++++++++++++++++++
arch/arm/boot/dts/gemini.dtsi | 26 ++++++++++++++++++++++++++
6 files changed, 103 insertions(+)
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -303,5 +303,13 @@
};
};
};
+
+ usb@68000000 {
+ status = "okay";
+ };
+
+ usb@69000000 {
+ status = "okay";
+ };
};
};
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -146,5 +146,13 @@
ata@63000000 {
status = "okay";
};
+
+ usb@68000000 {
+ status = "okay";
+ };
+
+ usb@69000000 {
+ status = "okay";
+ };
};
};
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -114,5 +114,25 @@
pinctrl-names = "default";
pinctrl-0 = <&gpio1_default_pins>;
};
+
+ ethernet@60000000 {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ ethernet-port@1 {
+ /* Not used in this platform */
+ };
+ };
+
+ usb@68000000 {
+ status = "okay";
+ };
+
+ usb@69000000 {
+ status = "okay";
+ };
};
};
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -160,5 +160,25 @@
<0x6000 0 0 3 &pci_intc 1>,
<0x6000 0 0 4 &pci_intc 2>;
};
+
+ ethernet@60000000 {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ ethernet-port@1 {
+ /* Not used in this platform */
+ };
+ };
+
+ usb@68000000 {
+ status = "okay";
+ };
+
+ usb@69000000 {
+ status = "okay";
+ };
};
};
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -165,5 +165,26 @@
<0x6000 0 0 3 &pci_intc 1>,
<0x6000 0 0 4 &pci_intc 2>;
};
+
+ ethernet@60000000 {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ ethernet-port@1 {
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ };
+
+ usb@68000000 {
+ status = "okay";
+ };
+
+ usb@69000000 {
+ status = "okay";
+ };
};
};
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -411,5 +411,31 @@
#size-cells = <0>;
status = "disabled";
};
+
+ usb@68000000 {
+ compatible = "cortina,gemini-usb", "faraday,fotg210";
+ reg = <0x68000000 0x1000>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&syscon GEMINI_RESET_USB0>;
+ clocks = <&syscon GEMINI_CLK_GATE_USB0>;
+ clock-names = "PCLK";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_default_pins>;
+ syscon = <&syscon>;
+ status = "disabled";
+ };
+
+ usb@69000000 {
+ compatible = "cortina,gemini-usb", "faraday,fotg210";
+ reg = <0x69000000 0x1000>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&syscon GEMINI_RESET_USB1>;
+ clocks = <&syscon GEMINI_CLK_GATE_USB1>;
+ clock-names = "PCLK";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_default_pins>;
+ syscon = <&syscon>;
+ status = "disabled";
+ };
};
};

31
target/linux/gemini/patches-4.14/0032-usb-host-fotg2-restart-hcd-after-port-reset.patch Normal file
View file

@ -0,0 +1,31 @@
From 731a2896e11b4e6a8d252e6c14edb1b09dbfcd46 Mon Sep 17 00:00:00 2001
From: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Date: Sat, 14 Apr 2018 18:49:57 +0200
Subject: [PATCH 1/2] usb: host: fotg2: restart hcd after port reset
on Gemini SoC FOTG2 stalls after port reset
rerstart the hcd.
Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
---
drivers/usb/host/fotg210-hcd.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 2acc51b0be5a..bc9efb49adc7 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1658,6 +1658,10 @@ static int fotg210_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/* see what we found out */
temp = check_reset_complete(fotg210, wIndex, status_reg,
fotg210_readl(fotg210, status_reg));
+
+ /* restart schedule */
+ fotg210->command |= CMD_RUN;
+ fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command);
}
if (!(temp & (PORT_RESUME|PORT_RESET))) {
--
2.16.2

17
target/linux/gemini/patches-4.14/0900-arm-dts-gemini-add-openwrt-partitions-for-nas4220b.patch Normal file
View file

@ -0,0 +1,17 @@
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -115,6 +115,14 @@
reg = <0x00fe0000 0x00020000>;
read-only;
};
+ firmware@20000 {
+ label = "firmware";
+ reg = <0x00020000 0x00f00000>;
+ };
+ rootfs@320000 {
+ label = "rootfs";
+ reg = <0x00320000 0x00c00000>;
+ };
};
syscon: syscon@40000000 {

69
target/linux/gemini/patches-4.14/0901-arm-dts-gemini-fix-ethernet-for-nas4220b.patch Normal file
View file

@ -0,0 +1,69 @@
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -137,6 +137,47 @@
groups = "gpio1dgrp";
};
};
+ pinctrl-gmii {
+ mux {
+ function = "gmii";
+ groups = "gmii_gmac0_grp";
+ };
+ conf0 {
+ pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
+ skew-delay = <0>;
+ };
+ conf1 {
+ pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
+ skew-delay = <15>;
+ };
+ conf2 {
+ pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
+ skew-delay = <7>;
+ };
+ conf3 {
+ pins = "U8 GMAC0 TXC";
+ skew-delay = <11>;
+ };
+ conf4 {
+ pins = "V11 GMAC1 TXC";
+ skew-delay = <10>;
+ };
+ conf5 {
+ pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+ "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+ "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+ "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+ "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+ "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+ "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+ "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+ skew-delay = <7>;
+ };
+ conf6 {
+ groups = "gmii_gmac0_grp";
+ drive-strength = <16>;
+ };
+ };
};
};
@@ -151,6 +192,18 @@
pinctrl-0 = <&gpio1_default_pins>;
};
+ ethernet@60000000 {
+ status = "okay";
+
+ gmac0: ethernet-port@0 {
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ gmac1: ethernet-port@1 {
+ status = "disabled";
+ };
+ };
+
ata@63000000 {
status = "okay";
};

13
target/linux/gemini/patches-4.14/0902-arm-dts-gemini-add-second-ata-for-nas4220b.patch Normal file
View file

@ -0,0 +1,13 @@
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -208,6 +208,10 @@
status = "okay";
};
+ ata@63400000 {
+ status = "okay";
+ };
+
usb@68000000 {
status = "okay";
};

11
target/linux/gemini/patches-4.14/0903-arm-dts-gemini-disable-usb-port-1-until-fixed.patch Normal file
View file

@ -0,0 +1,11 @@
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -217,7 +217,7 @@
};
usb@69000000 {
- status = "okay";
+ status = "disabled";
};
};
};

23
target/linux/gemini/patches-4.14/0904-net-cortina-fix-uninitialized-struct-member-usage.patch Normal file
View file

@ -0,0 +1,23 @@
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -1013,9 +1013,9 @@ static int geth_resize_freeq(struct gemi
int ret;
if (netdev->dev_id == 0)
- other_netdev = geth->port1->netdev;
+ other_netdev = (geth->port1)? geth->port1->netdev : NULL;
else
- other_netdev = geth->port0->netdev;
+ other_netdev = (geth->port0)? geth->port0->netdev : NULL;
if (other_netdev && netif_running(other_netdev))
return -EBUSY;
@@ -2510,6 +2510,8 @@ static int gemini_ethernet_probe(struct
if (IS_ERR(geth->base))
return PTR_ERR(geth->base);
geth->dev = dev;
+ geth->port0 = NULL;
+ geth->port1 = NULL;
/* Wait for ports to stabilize */
do {