ar71xx: add support for TP-Link Archer C59 v2
TP-Link Archer C59v2 is a dual-band AC1350 router based on Qualcomm/Atheros QCA9561+QCA9886 chips. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - UART header on PCB Flash instruction: - via web UI: 1. Download openwrt-ar71xx-generic-archer-c59-v2-squashfs-factory.bin 2. Login to router and open the Advanced tab 3. Navigate to System Tools -> Firmware Upgrade 4. Upload firmware using the Manual Upgrade form - via TFTP: 1. Set PC to fixed ip address 192.168.0.66 2. Download openwrt-ar71xx-generic-archer-c59-v2-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Keith Maika <keithm@aoeex.com>
This commit is contained in:
parent
a3d2448fae
commit
4caab80830
13 changed files with 134 additions and 5 deletions
|
@ -129,6 +129,7 @@ archer-c7)
|
|||
;;
|
||||
archer-c58-v1|\
|
||||
archer-c59-v1|\
|
||||
archer-c59-v2|\
|
||||
archer-c60-v1|\
|
||||
archer-c60-v2)
|
||||
ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
|
||||
|
@ -137,7 +138,8 @@ archer-c60-v2)
|
|||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
|
||||
|
||||
case "$board" in
|
||||
archer-c59-v1)
|
||||
archer-c59-v1|\
|
||||
archer-c59-v2)
|
||||
ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
|
||||
;;
|
||||
esac
|
||||
|
|
|
@ -249,6 +249,7 @@ ar71xx_setup_interfaces()
|
|||
;;
|
||||
archer-c58-v1|\
|
||||
archer-c59-v1|\
|
||||
archer-c59-v2|\
|
||||
fritz4020|\
|
||||
rb-450g)
|
||||
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
|
||||
|
|
|
@ -66,6 +66,7 @@ get_status_led() {
|
|||
archer-c25-v1|\
|
||||
archer-c58-v1|\
|
||||
archer-c59-v1|\
|
||||
archer-c59-v2|\
|
||||
archer-c60-v1|\
|
||||
archer-c60-v2|\
|
||||
archer-c7-v4|\
|
||||
|
|
|
@ -168,6 +168,7 @@ case "$FIRMWARE" in
|
|||
case $board in
|
||||
archer-c58-v1|\
|
||||
archer-c59-v1|\
|
||||
archer-c59-v2|\
|
||||
archer-c60-v1|\
|
||||
archer-c60-v2|\
|
||||
cf-e355ac-v2|\
|
||||
|
|
|
@ -14,6 +14,7 @@ board=$(board_name)
|
|||
case "$board" in
|
||||
archer-c58-v1|\
|
||||
archer-c59-v1|\
|
||||
archer-c59-v2|\
|
||||
archer-c60-v1|\
|
||||
archer-c60-v2)
|
||||
echo $(macaddr_add $(mtd_get_mac_binary mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
|
||||
|
|
|
@ -492,6 +492,9 @@ ar71xx_board_detect() {
|
|||
;;
|
||||
*"Archer C59 v1")
|
||||
name="archer-c59-v1"
|
||||
;;
|
||||
*"Archer C59 v2")
|
||||
name="archer-c59-v2"
|
||||
;;
|
||||
*"Archer C60 v1")
|
||||
name="archer-c60-v1"
|
||||
|
|
|
@ -212,6 +212,7 @@ platform_check_image() {
|
|||
archer-c25-v1|\
|
||||
archer-c58-v1|\
|
||||
archer-c59-v1|\
|
||||
archer-c59-v2|\
|
||||
archer-c60-v1|\
|
||||
archer-c60-v2|\
|
||||
archer-c7-v4|\
|
||||
|
|
|
@ -52,6 +52,7 @@ CONFIG_ATH79=y
|
|||
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
|
||||
# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
|
||||
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
|
||||
# CONFIG_ATH79_MACH_ARCHER_C59_V2 is not set
|
||||
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
|
||||
# CONFIG_ATH79_MACH_ARCHER_C60_V2 is not set
|
||||
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
|
||||
|
|
|
@ -1575,6 +1575,17 @@ config ATH79_MACH_ARCHER_C59_V1
|
|||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_ARCHER_C59_V2
|
||||
bool "TP-LINK Archer C59 v2 support"
|
||||
select SOC_QCA956X
|
||||
select ATH79_DEV_AP9X_PCI if PCI
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_ARCHER_C60_V1
|
||||
bool "TP-LINK Archer C60 v1 support"
|
||||
select SOC_QCA956X
|
||||
|
|
|
@ -146,6 +146,49 @@ static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct gpio_led archer_c59_v2_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "archer-c59-v2:green:power",
|
||||
.gpio = ARCHER_C59_74HC_GPIO_LED_POWER,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "archer-c59-v2:green:wlan2g",
|
||||
.gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "archer-c59-v2:green:wlan5g",
|
||||
.gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "archer-c59-v2:green:lan",
|
||||
.gpio = ARCHER_C59_74HC_GPIO_LED_LAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "archer-c59-v2:green:wan",
|
||||
.gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "archer-c59-v2:amber:wan",
|
||||
.gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "archer-c59-v2:green:wps",
|
||||
.gpio = ARCHER_C59_74HC_GPIO_LED_WPS,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "archer-c59-v2:green:usb",
|
||||
.gpio = ARCHER_C59_74HC_GPIO_LED_USB,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button archer_c59_v1_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "Reset button",
|
||||
|
@ -215,9 +258,9 @@ static struct spi_board_info archer_c59_v1_spi_info[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static void __init archer_c5x_v1_setup(void)
|
||||
static void __init archer_c5x_v1_setup(u32 macLocation)
|
||||
{
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
|
||||
u8 *mac = (u8 *) KSEG1ADDR(macLocation);
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
@ -270,7 +313,7 @@ static void __init archer_c5x_v1_setup(void)
|
|||
|
||||
static void __init archer_c58_v1_setup(void)
|
||||
{
|
||||
archer_c5x_v1_setup();
|
||||
archer_c5x_v1_setup(0x1f010008);
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c58_v1_leds_gpio),
|
||||
archer_c58_v1_leds_gpio);
|
||||
}
|
||||
|
@ -280,10 +323,20 @@ MIPS_MACHINE(ATH79_MACH_ARCHER_C58_V1, "ARCHER-C58-V1",
|
|||
|
||||
static void __init archer_c59_v1_setup(void)
|
||||
{
|
||||
archer_c5x_v1_setup();
|
||||
archer_c5x_v1_setup(0x1f010008);
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
|
||||
archer_c59_v1_leds_gpio);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1",
|
||||
"TP-LINK Archer C59 v1", archer_c59_v1_setup);
|
||||
|
||||
static void __init archer_c59_v2_setup(void)
|
||||
{
|
||||
archer_c5x_v1_setup(0x1f030008);
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v2_leds_gpio),
|
||||
archer_c59_v2_leds_gpio);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V2, "ARCHER-C59-V2",
|
||||
"TP-LINK Archer C59 v2", archer_c59_v2_setup);
|
||||
|
|
|
@ -47,6 +47,7 @@ enum ath79_mach_type {
|
|||
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
|
||||
ATH79_MACH_ARCHER_C58_V1, /* TP-LINK Archer C58 V1 board */
|
||||
ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
|
||||
ATH79_MACH_ARCHER_C59_V2, /* TP-LINK Archer C59 V2 board */
|
||||
ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
|
||||
ATH79_MACH_ARCHER_C60_V2, /* TP-LINK Archer C60 V2 board */
|
||||
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
|
||||
|
|
|
@ -45,6 +45,18 @@ define Device/archer-c59-v1
|
|||
endef
|
||||
TARGET_DEVICES += archer-c59-v1
|
||||
|
||||
define Device/archer-c59-v2
|
||||
$(Device/archer-c59-v1)
|
||||
DEVICE_TITLE := TP-LINK Archer C59 v2
|
||||
BOARDNAME := ARCHER-C59-V2
|
||||
TPLINK_BOARD_ID := ARCHER-C59-V2
|
||||
DEVICE_PROFILE := ARCHERC59V2
|
||||
IMAGE_SIZE := 14400k
|
||||
MTDPARTS := spi0.0:128k(factory-boot)ro,64k(u-boot)ro,64k(mac)ro,14400k(firmware),1664k(tplink)ro,64k@0xff0000(art)ro
|
||||
SUPPORTED_DEVICES := archer-c59-v2
|
||||
endef
|
||||
TARGET_DEVICES += archer-c59-v2
|
||||
|
||||
define Device/archer-c60-v1
|
||||
$(Device/archer-cxx)
|
||||
DEVICE_TITLE := TP-LINK Archer C60 v1
|
||||
|
|
|
@ -463,6 +463,46 @@ static struct device_info boards[] = {
|
|||
.last_sysupgrade_partition = "file-system",
|
||||
},
|
||||
|
||||
/** Firmware layout for the C59v2 */
|
||||
{
|
||||
.id = "ARCHER-C59-V2",
|
||||
.vendor = "",
|
||||
.support_list =
|
||||
"SupportList:\r\n"
|
||||
"{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
|
||||
"{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
|
||||
"{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
|
||||
.support_trail = '\x00',
|
||||
.soft_ver = "soft_ver:2.0.0 Build 20161206 rel.7303\n",
|
||||
|
||||
/** We're using a dynamic kernel/rootfs split here */
|
||||
.partitions = {
|
||||
{"factory-boot", 0x00000, 0x20000},
|
||||
{"fs-uboot", 0x20000, 0x10000},
|
||||
{"default-mac", 0x30000, 0x00200},
|
||||
{"pin", 0x30200, 0x00200},
|
||||
{"device-id", 0x30400, 0x00100},
|
||||
{"product-info", 0x30500, 0x0fb00},
|
||||
{"firmware", 0x40000, 0xe10000},
|
||||
{"partition-table", 0xe50000, 0x10000},
|
||||
{"soft-version", 0xe60000, 0x10000},
|
||||
{"support-list", 0xe70000, 0x10000},
|
||||
{"profile", 0xe80000, 0x10000},
|
||||
{"default-config", 0xe90000, 0x10000},
|
||||
{"user-config", 0xea0000, 0x40000},
|
||||
{"usb-config", 0xee0000, 0x10000},
|
||||
{"certificate", 0xef0000, 0x10000},
|
||||
{"extra-para", 0xf00000, 0x10000},
|
||||
{"qos-db", 0xf10000, 0x30000},
|
||||
{"log", 0xfe0000, 0x10000},
|
||||
{"radio", 0xff0000, 0x10000},
|
||||
{NULL, 0, 0}
|
||||
},
|
||||
|
||||
.first_sysupgrade_partition = "os-image",
|
||||
.last_sysupgrade_partition = "file-system",
|
||||
},
|
||||
|
||||
/** Firmware layout for the C60v1 */
|
||||
{
|
||||
.id = "ARCHER-C60-V1",
|
||||
|
@ -1550,6 +1590,7 @@ static void build_image(const char *output,
|
|||
|
||||
/* Some devices need the extra-para partition to accept the firmware */
|
||||
if (strcasecmp(info->id, "ARCHER-C25-V1") == 0 ||
|
||||
strcasecmp(info->id, "ARCHER-C59-V2") == 0 ||
|
||||
strcasecmp(info->id, "ARCHER-C60-V2") == 0 ||
|
||||
strcasecmp(info->id, "TLWR1043NV5") == 0) {
|
||||
const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
|
||||
|
|
Loading…
Reference in a new issue