ramips: add support for Planex VR500.

SOC:	MT7621A
RAM:	256MiB
NOR:	MX25L51245G

Non Wireless Router.

Issue: soft reboot problem. SPI Flash do not exit 4byte address mode.

Signed-off-by: Yuhei Okawa <tochiro.srchack@gmail.com>
This commit is contained in:
YuheiOKAWA 2016-10-10 10:24:42 +09:00 committed by John Crispin
parent 8a2a20e71e
commit 4050cfebda
7 changed files with 112 additions and 1 deletions

View file

@ -146,7 +146,8 @@ mzk-ex300np)
;; ;;
dir-810l|\ dir-810l|\
mzk-750dhp|\ mzk-750dhp|\
mzk-dp150n) mzk-dp150n|\
vr500)
ucidef_set_led_default "power" "power" "$board:green:power" "1" ucidef_set_led_default "power" "power" "$board:green:power" "1"
;; ;;
dir-860l-b1) dir-860l-b1)

View file

@ -85,6 +85,7 @@ ramips_setup_interfaces()
psg1218|\ psg1218|\
sap-g3200u3|\ sap-g3200u3|\
sk-wb8|\ sk-wb8|\
vr500|\
wf-2881|\ wf-2881|\
whr-300hp2|\ whr-300hp2|\
whr-600d|\ whr-600d|\
@ -354,6 +355,10 @@ ramips_setup_macs()
lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR) lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR) wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR)
;; ;;
vr500)
lan_mac=$(mtd_get_mac_binary factory 57344)
wan_mac=$(mtd_get_mac_binary factory 57350)
;;
w306r-v20) w306r-v20)
lan_mac=$(cat /sys/class/net/eth0/address) lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" 5) wan_mac=$(macaddr_add "$lan_mac" 5)

View file

@ -29,6 +29,7 @@ get_status_led() {
nbg-419n|\ nbg-419n|\
nbg-419n2|\ nbg-419n2|\
pwh2004|\ pwh2004|\
vr500|\
wnce2001|\ wnce2001|\
wndr3700v5|\ wndr3700v5|\
x5|\ x5|\

View file

@ -442,6 +442,9 @@ ramips_board_detect() {
*"VoCore") *"VoCore")
name="vocore" name="vocore"
;; ;;
*"VR500")
name="vr500"
;;
*"W150M") *"W150M")
name="w150m" name="w150m"
;; ;;

View file

@ -128,6 +128,7 @@ platform_check_image() {
ur-336un|\ ur-336un|\
v22rw-2x2|\ v22rw-2x2|\
vocore|\ vocore|\
vr500|\
w150m|\ w150m|\
w306r-v20|\ w306r-v20|\
w502u|\ w502u|\

View file

@ -0,0 +1,92 @@
/dts-v1/;
#include "mt7621.dtsi"
/ {
compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
model = "Planex VR500";
memory@0 {
device_type = "memory";
reg = <0x0 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "vr500:green:power";
gpios = <&gpio1 13 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 15 1>;
linux,code = <0x198>;
};
};
};
&xhci {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3fb0000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
ralink,function = "gpio";
};
};
};
&pcie {
status = "disabled";
};

View file

@ -182,6 +182,14 @@ define Device/sk-wb8
endef endef
TARGET_DEVICES += sk-wb8 TARGET_DEVICES += sk-wb8
define Device/vr500
DTS := VR500
IMAGE_SIZE := 66453504
DEVICE_TITLE := Planex VR500
DEVICE_PACKAGES := kmod-usb3
endef
TARGET_DEVICES += vr500
# FIXME: is this still needed? # FIXME: is this still needed?
define Image/Prepare define Image/Prepare
#define Build/Compile #define Build/Compile