lantiq: add support for ZyXEL P2601HNFX

SVN-Revision: 38049
This commit is contained in:
Luka Perkov 2013-09-19 00:50:46 +00:00
parent 7d2c5682b9
commit 3b33adeb99
4 changed files with 209 additions and 1 deletions

View file

@ -90,6 +90,12 @@ H201L)
ucidef_add_switch "switch0" "1" "1" ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4t" ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4t"
;; ;;
P2601HNFX)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
;;
esac esac
[ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload" [ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"

View file

@ -0,0 +1,189 @@
/dts-v1/;
/include/ "ar9.dtsi"
/ {
model = "P2601HNFX - ZyXEL P-2601HN-Fx";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff
1 0 0x4000000 0x4000010>;
compatible = "lantiq,localbus", "simple-bus";
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "firmware";
reg = <0x60000 0xfa0000>;
};
};
};
gpio: pinmux@E100B10 {
compatible = "lantiq,pinctrl-xr9";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io4", "io5", "io6";
lantiq,open-drain;
lantiq,pull = <0>;
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
};
};
etop@E180000 {
phy-mode = "rmii";
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 9 0>;
};
stp: stp@E100BB0 {
#gpio-cells = <2>;
compatible = "lantiq,gpio-stp-xway";
gpio-controller;
reg = <0xE100BB0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
pci@E105400 {
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 29 1>;
gpios-reset = <&gpio 21 0>;
req-mask = <0x1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 53 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio 54 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "power";
gpios = <&stp 11 1>;
default-state = "on";
};
power2 {
label = "power2";
gpios = <&gpio 29 1>;
};
online {
label = "online";
gpios = <&stp 13 1>;
};
online2 {
label = "online2";
gpios = <&stp 12 1>;
};
dsl {
label = "dsl";
gpios = <&stp 14 1>;
};
phone {
label = "phone";
gpios = <&stp 9 1>;
};
phone2 {
label = "phone2";
gpios = <&stp 8 1>;
};
wifi {
label = "wifi";
gpios = <&stp 15 1>;
};
wifi2 {
label = "wifi2";
gpios = <&stp 10 1>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
switch {
gpio-export,name = "switch";
gpio-export,output = <1>;
gpios = <&gpio 50 0>;
};
usb {
gpio-export,name = "wifi";
gpio-export,output = <1>;
gpios = <&gpio 9 0>;
};
};
};

View file

@ -7,7 +7,7 @@
# boards missing since devicetree update # boards missing since devicetree update
#EASY50712 ARV3527P GIGASX76X BTHOMEHUBV2B BTHOMEHUBV2BOPENRG #EASY50712 ARV3527P GIGASX76X BTHOMEHUBV2B BTHOMEHUBV2BOPENRG
#WBMR P2601HNFX #WBMR
include $(TOPDIR)/rules.mk include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk include $(INCLUDE_DIR)/image.mk
@ -258,6 +258,9 @@ Image/Build/Profile/GR7000=$(call Image/Build/$(1),$(1),GR7000)
Image/BuildKernel/Profile/H201L=$(call Image/BuildKernel/Template,H201L) Image/BuildKernel/Profile/H201L=$(call Image/BuildKernel/Template,H201L)
Image/Build/Profile/H201L=$(call Image/Build/$(1),$(1),H201L) Image/Build/Profile/H201L=$(call Image/Build/$(1),$(1),H201L)
Image/BuildKernel/Profile/P2601HNFX=$(call Image/BuildKernel/Template,P2601HNFX)
Image/Build/Profile/P2601HNFX=$(call Image/Build/$(1),$(1),P2601HNFX)
endif endif

View file

@ -0,0 +1,10 @@
define Profile/P2601HNFX
NAME:=ZyXEL P-2601HN-Fx
PACKAGES:= kmod-rt2800-usb wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoe \
kmod-ltq-deu-ar9 kmod-ltq-hcd-ar9 \
swconfig
endef
$(eval $(call Profile,P2601HNFX))