ramips: add support for Tenda 3G150B

Add suport for Tenda 3G150B:
- cpu: Ralink RT5350F
- flash: 4MB
- ram: 32MB
- 1x USB 2.0
- 1x RJ45
- one reset button
- battery powered (BP-4L, 3.7V 1450mAh)

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 44073

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -24,6 +24,7 @@ case $board in
 	3g-6200nl)
 		set_wifi_led "edimax:green:wlan"
 		;;
+	3g150b |\
 	3g300m)
 		set_usb_led "tenda:blue:3g"
 		;;

target/linux/ramips/base-files/etc/board.d/02_network

@@ -43,6 +43,7 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "switch0" "1" "0 6t"
 		;;
 
+	3g150b | \
 	3g300m | \
 	w150m | \
 	all0256n | \

target/linux/ramips/base-files/etc/diag.sh

@@ -9,7 +9,7 @@ get_status_led() {
 	3g-6200n)
 		status_led="edimax:green:power"
 		;;
-	3g300m | w150m)
+	3g150b | 3g300m | w150m)
 		status_led="tenda:blue:ap"
 		;;
 	ai-br100)

target/linux/ramips/base-files/lib/ramips.sh

@@ -316,6 +316,9 @@ ramips_board_detect() {
 	*"Tenda 3G300M")
 		name="3g300m"
 		;;
+	*"Tenda 3G150B")
+		name="3g150b"
+		;;
 	*"Tenda W306R V2.0")
 		name="w306r-v20"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -16,6 +16,7 @@ platform_check_image() {
 	case "$board" in
 	3g-6200n | \
 	3g-6200nl | \
+	3g150b | \
 	3g300m | \
 	a5-v11 | \
 	air3gii | \

target/linux/ramips/dts/3G150B.dts

@@ -0,0 +1,114 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible = "3G150B", "ralink,rt5350-soc";
+	model = "Tenda 3G150B";
+
+	palmbus@10000000 {
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "s25fl064k";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "s25fl064k";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x3b0000>;
+				};
+			};
+		};
+		gpio1: gpio@660 {
+			status = "okay";
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		mtd-mac-address = <&factory 0x4>;
+	};
+
+	esw@10110000 {
+		ralink,portmap = <0x2f>;
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+		ralink,led-polarity = <1>;
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		ap {
+			label = "tenda:blue:ap";
+			gpios = <&gpio0 7 1>;
+		};
+		3g {
+			label = "tenda:blue:3g";
+			gpios = <&gpio0 14 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usb {
+			gpio-export,name = "usb";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 13 0>;
+		};
+	};
+
+};

target/linux/ramips/image/Makefile

@@ -549,6 +549,8 @@ Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
 Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
 
 # Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI
+Image/Build/Profile/3G150B=$(call BuildFirmware/Default4M/$(1),$(1),3g150b,3G150B,Linux Kernel Image)
+
 Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image)
 Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image)
 
@@ -676,6 +678,7 @@ ifeq ($(SUBTARGET),rt305x)
 define Image/Build/Profile/Default
 	$(call Image/Build/Profile/3G6200N,$(1))
 	$(call Image/Build/Profile/3G6200NL,$(1))
+	$(call Image/Build/Profile/3G150B,$(1))
 	$(call Image/Build/Profile/3G300M,$(1))
 	$(call Image/Build/Profile/A5-11,$(1))
 	$(call Image/Build/Profile/AIR3GII,$(1))

target/linux/ramips/rt305x/profiles/tenda.mk

@@ -5,6 +5,19 @@
 # See /LICENSE for more information.
 #
 
+define Profile/3G150B
+	NAME:=Tenda 3G150B
+	PACKAGES:=\
+		kmod-usb-core kmod-usb-dwc2 \
+		kmod-ledtrig-usbdev
+endef
+
+define Profile/3G150B/Description
+	Package set for Tenda 3G150B board
+endef
+
+$(eval $(call Profile,3G150B))
+
 define Profile/3G300M
 	NAME:=Tenda 3G300M
 	PACKAGES:=\