imx6: backport ahci support
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37936
This commit is contained in:
Luka Perkov
parent
b2c852e685
commit
2964a11933
4 changed files with 545 additions and 0 deletions
|
|
@ -0,0 +1,306 @@
|
||||||
|
From 9e54eae23bc9cca0d8a955018c35b1250e09a73a Mon Sep 17 00:00:00 2001
|
||||||
|
From: Richard Zhu <r65037@freescale.com>
|
||||||
|
Date: Wed, 24 Jul 2013 14:15:29 +0800
|
||||||
|
Subject: [PATCH] ahci_imx: add ahci sata support on imx platforms
|
||||||
|
|
||||||
|
imx6q contains one Synopsys AHCI SATA controller, But it can't share
|
||||||
|
ahci_platform driver with other controllers because there are some
|
||||||
|
misalignments of the generic AHCI controller - the bits definitions of
|
||||||
|
the HBA registers, the Vendor Specific registers, the AHCI PHY clock
|
||||||
|
and the AHCI signals adjustment window(GPR13 register).
|
||||||
|
|
||||||
|
- CAP_SSS(bit20) of the HOST_CAP is writable, default value is '0',
|
||||||
|
should be configured to be '1'
|
||||||
|
|
||||||
|
- bit0 (only one AHCI SATA port on imx6q) of the HOST_PORTS_IMPL
|
||||||
|
should be set to be '1'.(default 0)
|
||||||
|
|
||||||
|
- One Vendor Specific register HOST_TIMER1MS(offset:0xe0) should be
|
||||||
|
configured regarding to the frequency of AHB bus clock.
|
||||||
|
|
||||||
|
- Configurations of the AHCI PHY clock, and the signal parameters of
|
||||||
|
the GPR13
|
||||||
|
|
||||||
|
Setup its own ahci sata driver, contained the imx6q specific
|
||||||
|
initialized codes, re-use the generic ahci_platform driver, and keep
|
||||||
|
the generic ahci_platform driver clean as much as possible.
|
||||||
|
|
||||||
|
tj: patch description reformatted
|
||||||
|
|
||||||
|
Signed-off-by: Richard Zhu <r65037@freescale.com>
|
||||||
|
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
|
||||||
|
Signed-off-by: Tejun Heo <tj@kernel.org>
|
||||||
|
---
|
||||||
|
drivers/ata/Kconfig | 9 ++
|
||||||
|
drivers/ata/Makefile | 1 +
|
||||||
|
drivers/ata/ahci_imx.c | 236 +++++++++++++++++++++++++++++++++++++++++++++++++
|
||||||
|
3 files changed, 246 insertions(+)
|
||||||
|
create mode 100644 drivers/ata/ahci_imx.c
|
||||||
|
|
||||||
|
--- a/drivers/ata/Kconfig
|
||||||
|
+++ b/drivers/ata/Kconfig
|
||||||
|
@@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM
|
||||||
|
|
||||||
|
If unsure, say N.
|
||||||
|
|
||||||
|
+config AHCI_IMX
|
||||||
|
+ tristate "Freescale i.MX AHCI SATA support"
|
||||||
|
+ depends on SATA_AHCI_PLATFORM
|
||||||
|
+ help
|
||||||
|
+ This option enables support for the Freescale i.MX SoC's
|
||||||
|
+ onboard AHCI SATA.
|
||||||
|
+
|
||||||
|
+ If unsure, say N.
|
||||||
|
+
|
||||||
|
config SATA_FSL
|
||||||
|
tristate "Freescale 3.0Gbps SATA support"
|
||||||
|
depends on FSL_SOC
|
||||||
|
--- a/drivers/ata/Makefile
|
||||||
|
+++ b/drivers/ata/Makefile
|
||||||
|
@@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic
|
||||||
|
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
|
||||||
|
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
|
||||||
|
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
|
||||||
|
+obj-$(CONFIG_AHCI_IMX) += ahci_imx.o
|
||||||
|
|
||||||
|
# SFF w/ custom DMA
|
||||||
|
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/drivers/ata/ahci_imx.c
|
||||||
|
@@ -0,0 +1,236 @@
|
||||||
|
+/*
|
||||||
|
+ * Freescale IMX AHCI SATA platform driver
|
||||||
|
+ * Copyright 2013 Freescale Semiconductor, Inc.
|
||||||
|
+ *
|
||||||
|
+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
|
||||||
|
+ *
|
||||||
|
+ * This program is free software; you can redistribute it and/or modify it
|
||||||
|
+ * under the terms and conditions of the GNU General Public License,
|
||||||
|
+ * version 2, as published by the Free Software Foundation.
|
||||||
|
+ *
|
||||||
|
+ * This program is distributed in the hope it will be useful, but WITHOUT
|
||||||
|
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||||
|
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||||
|
+ * more details.
|
||||||
|
+ *
|
||||||
|
+ * You should have received a copy of the GNU General Public License along with
|
||||||
|
+ * this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#include <linux/kernel.h>
|
||||||
|
+#include <linux/module.h>
|
||||||
|
+#include <linux/platform_device.h>
|
||||||
|
+#include <linux/regmap.h>
|
||||||
|
+#include <linux/ahci_platform.h>
|
||||||
|
+#include <linux/of_device.h>
|
||||||
|
+#include <linux/mfd/syscon.h>
|
||||||
|
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
||||||
|
+#include "ahci.h"
|
||||||
|
+
|
||||||
|
+enum {
|
||||||
|
+ HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+struct imx_ahci_priv {
|
||||||
|
+ struct platform_device *ahci_pdev;
|
||||||
|
+ struct clk *sata_ref_clk;
|
||||||
|
+ struct clk *ahb_clk;
|
||||||
|
+ struct regmap *gpr;
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
|
||||||
|
+{
|
||||||
|
+ int ret = 0;
|
||||||
|
+ unsigned int reg_val;
|
||||||
|
+ struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
|
||||||
|
+
|
||||||
|
+ imxpriv->gpr =
|
||||||
|
+ syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
|
||||||
|
+ if (IS_ERR(imxpriv->gpr)) {
|
||||||
|
+ dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n");
|
||||||
|
+ return PTR_ERR(imxpriv->gpr);
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ ret = clk_prepare_enable(imxpriv->sata_ref_clk);
|
||||||
|
+ if (ret < 0) {
|
||||||
|
+ dev_err(dev, "prepare-enable sata_ref clock err:%d\n", ret);
|
||||||
|
+ return ret;
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ /*
|
||||||
|
+ * set PHY Paremeters, two steps to configure the GPR13,
|
||||||
|
+ * one write for rest of parameters, mask of first write
|
||||||
|
+ * is 0x07fffffd, and the other one write for setting
|
||||||
|
+ * the mpll_clk_en.
|
||||||
|
+ */
|
||||||
|
+ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
|
||||||
|
+ | IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK
|
||||||
|
+ | IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK
|
||||||
|
+ | IMX6Q_GPR13_SATA_SPD_MODE_MASK
|
||||||
|
+ | IMX6Q_GPR13_SATA_MPLL_SS_EN
|
||||||
|
+ | IMX6Q_GPR13_SATA_TX_ATTEN_MASK
|
||||||
|
+ | IMX6Q_GPR13_SATA_TX_BOOST_MASK
|
||||||
|
+ | IMX6Q_GPR13_SATA_TX_LVL_MASK
|
||||||
|
+ | IMX6Q_GPR13_SATA_TX_EDGE_RATE
|
||||||
|
+ , IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
|
||||||
|
+ | IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M
|
||||||
|
+ | IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F
|
||||||
|
+ | IMX6Q_GPR13_SATA_SPD_MODE_3P0G
|
||||||
|
+ | IMX6Q_GPR13_SATA_MPLL_SS_EN
|
||||||
|
+ | IMX6Q_GPR13_SATA_TX_ATTEN_9_16
|
||||||
|
+ | IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB
|
||||||
|
+ | IMX6Q_GPR13_SATA_TX_LVL_1_025_V);
|
||||||
|
+ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
|
||||||
|
+ IMX6Q_GPR13_SATA_MPLL_CLK_EN);
|
||||||
|
+ usleep_range(100, 200);
|
||||||
|
+
|
||||||
|
+ /*
|
||||||
|
+ * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
|
||||||
|
+ * and IP vendor specific register HOST_TIMER1MS.
|
||||||
|
+ * Configure CAP_SSS (support stagered spin up).
|
||||||
|
+ * Implement the port0.
|
||||||
|
+ * Get the ahb clock rate, and configure the TIMER1MS register.
|
||||||
|
+ */
|
||||||
|
+ reg_val = readl(mmio + HOST_CAP);
|
||||||
|
+ if (!(reg_val & HOST_CAP_SSS)) {
|
||||||
|
+ reg_val |= HOST_CAP_SSS;
|
||||||
|
+ writel(reg_val, mmio + HOST_CAP);
|
||||||
|
+ }
|
||||||
|
+ reg_val = readl(mmio + HOST_PORTS_IMPL);
|
||||||
|
+ if (!(reg_val & 0x1)) {
|
||||||
|
+ reg_val |= 0x1;
|
||||||
|
+ writel(reg_val, mmio + HOST_PORTS_IMPL);
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
|
||||||
|
+ writel(reg_val, mmio + HOST_TIMER1MS);
|
||||||
|
+
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static void imx6q_sata_exit(struct device *dev)
|
||||||
|
+{
|
||||||
|
+ struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
|
||||||
|
+
|
||||||
|
+ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
|
||||||
|
+ !IMX6Q_GPR13_SATA_MPLL_CLK_EN);
|
||||||
|
+ clk_disable_unprepare(imxpriv->sata_ref_clk);
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static struct ahci_platform_data imx6q_sata_pdata = {
|
||||||
|
+ .init = imx6q_sata_init,
|
||||||
|
+ .exit = imx6q_sata_exit,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static const struct of_device_id imx_ahci_of_match[] = {
|
||||||
|
+ { .compatible = "fsl,imx6q-ahci", .data = &imx6q_sata_pdata},
|
||||||
|
+ {},
|
||||||
|
+};
|
||||||
|
+MODULE_DEVICE_TABLE(of, imx_ahci_of_match);
|
||||||
|
+
|
||||||
|
+static int imx_ahci_probe(struct platform_device *pdev)
|
||||||
|
+{
|
||||||
|
+ struct device *dev = &pdev->dev;
|
||||||
|
+ struct resource *mem, *irq, res[2];
|
||||||
|
+ const struct of_device_id *of_id;
|
||||||
|
+ const struct ahci_platform_data *pdata = NULL;
|
||||||
|
+ struct imx_ahci_priv *imxpriv;
|
||||||
|
+ struct device *ahci_dev;
|
||||||
|
+ struct platform_device *ahci_pdev;
|
||||||
|
+ int ret;
|
||||||
|
+
|
||||||
|
+ imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
|
||||||
|
+ if (!imxpriv) {
|
||||||
|
+ dev_err(dev, "can't alloc ahci_host_priv\n");
|
||||||
|
+ return -ENOMEM;
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ ahci_pdev = platform_device_alloc("ahci", -1);
|
||||||
|
+ if (!ahci_pdev)
|
||||||
|
+ return -ENODEV;
|
||||||
|
+
|
||||||
|
+ ahci_dev = &ahci_pdev->dev;
|
||||||
|
+ ahci_dev->parent = dev;
|
||||||
|
+
|
||||||
|
+ imxpriv->ahb_clk = devm_clk_get(dev, "ahb");
|
||||||
|
+ if (IS_ERR(imxpriv->ahb_clk)) {
|
||||||
|
+ dev_err(dev, "can't get ahb clock.\n");
|
||||||
|
+ ret = PTR_ERR(imxpriv->ahb_clk);
|
||||||
|
+ goto err_out;
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref");
|
||||||
|
+ if (IS_ERR(imxpriv->sata_ref_clk)) {
|
||||||
|
+ dev_err(dev, "can't get sata_ref clock.\n");
|
||||||
|
+ ret = PTR_ERR(imxpriv->sata_ref_clk);
|
||||||
|
+ goto err_out;
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ imxpriv->ahci_pdev = ahci_pdev;
|
||||||
|
+ platform_set_drvdata(pdev, imxpriv);
|
||||||
|
+
|
||||||
|
+ of_id = of_match_device(imx_ahci_of_match, dev);
|
||||||
|
+ if (of_id) {
|
||||||
|
+ pdata = of_id->data;
|
||||||
|
+ } else {
|
||||||
|
+ ret = -EINVAL;
|
||||||
|
+ goto err_out;
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||||
|
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
||||||
|
+ if (!mem || !irq) {
|
||||||
|
+ dev_err(dev, "no mmio/irq resource\n");
|
||||||
|
+ ret = -ENOMEM;
|
||||||
|
+ goto err_out;
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ res[0] = *mem;
|
||||||
|
+ res[1] = *irq;
|
||||||
|
+
|
||||||
|
+ ahci_dev->coherent_dma_mask = DMA_BIT_MASK(32);
|
||||||
|
+ ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask;
|
||||||
|
+ ahci_dev->of_node = dev->of_node;
|
||||||
|
+
|
||||||
|
+ ret = platform_device_add_resources(ahci_pdev, res, 2);
|
||||||
|
+ if (ret)
|
||||||
|
+ goto err_out;
|
||||||
|
+
|
||||||
|
+ ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata));
|
||||||
|
+ if (ret)
|
||||||
|
+ goto err_out;
|
||||||
|
+
|
||||||
|
+ ret = platform_device_add(ahci_pdev);
|
||||||
|
+ if (ret) {
|
||||||
|
+err_out:
|
||||||
|
+ platform_device_put(ahci_pdev);
|
||||||
|
+ return ret;
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static int imx_ahci_remove(struct platform_device *pdev)
|
||||||
|
+{
|
||||||
|
+ struct imx_ahci_priv *imxpriv = platform_get_drvdata(pdev);
|
||||||
|
+ struct platform_device *ahci_pdev = imxpriv->ahci_pdev;
|
||||||
|
+
|
||||||
|
+ platform_device_unregister(ahci_pdev);
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static struct platform_driver imx_ahci_driver = {
|
||||||
|
+ .probe = imx_ahci_probe,
|
||||||
|
+ .remove = imx_ahci_remove,
|
||||||
|
+ .driver = {
|
||||||
|
+ .name = "ahci-imx",
|
||||||
|
+ .owner = THIS_MODULE,
|
||||||
|
+ .of_match_table = imx_ahci_of_match,
|
||||||
|
+ },
|
||||||
|
+};
|
||||||
|
+module_platform_driver(imx_ahci_driver);
|
||||||
|
+
|
||||||
|
+MODULE_DESCRIPTION("Freescale i.MX AHCI SATA platform driver");
|
||||||
|
+MODULE_AUTHOR("Richard Zhu <Hong-Xing.Zhu@freescale.com>");
|
||||||
|
+MODULE_LICENSE("GPL");
|
||||||
|
+MODULE_ALIAS("ahci:imx");
|
||||||
|
|
@ -0,0 +1,145 @@
|
||||||
|
From 6a6c21ef487be47b300a0b24cd6afeb69d8b9a1a Mon Sep 17 00:00:00 2001
|
||||||
|
From: Richard Zhu <r65037@freescale.com>
|
||||||
|
Date: Wed, 24 Jul 2013 14:15:28 +0800
|
||||||
|
Subject: [PATCH] ARM: imx6q: update the sata bits definitions of gpr13
|
||||||
|
|
||||||
|
Replace the SATA_PHY_# by the more readable definitons.
|
||||||
|
|
||||||
|
tj: Being routed through libata branch to enable implementation of
|
||||||
|
ahci_imx.
|
||||||
|
|
||||||
|
Signed-off-by: Richard Zhu <r65037@freescale.com>
|
||||||
|
Acked-by: Shawn Guo <shawn.guo@linaro.org>
|
||||||
|
Signed-off-by: Tejun Heo <tj@kernel.org>
|
||||||
|
---
|
||||||
|
include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 121 +++++++++++++++++++---------
|
||||||
|
1 file changed, 84 insertions(+), 37 deletions(-)
|
||||||
|
|
||||||
|
--- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
|
||||||
|
+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
|
||||||
|
@@ -279,41 +279,88 @@
|
||||||
|
#define IMX6Q_GPR13_CAN2_STOP_REQ BIT(29)
|
||||||
|
#define IMX6Q_GPR13_CAN1_STOP_REQ BIT(28)
|
||||||
|
#define IMX6Q_GPR13_ENET_STOP_REQ BIT(27)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_8_MASK (0x7 << 24)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_8_0_5_DB (0x0 << 24)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_8_1_0_DB (0x1 << 24)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_8_1_5_DB (0x2 << 24)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_8_2_0_DB (0x3 << 24)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_8_2_5_DB (0x4 << 24)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_8_3_0_DB (0x5 << 24)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_8_3_5_DB (0x6 << 24)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_8_4_0_DB (0x7 << 24)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_7_MASK (0x1f << 19)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_7_SATA1I (0x10 << 19)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_7_SATA1M (0x10 << 19)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_7_SATA1X (0x1a << 19)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_7_SATA2I (0x12 << 19)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_7_SATA2M (0x12 << 19)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_7_SATA2X (0x1a << 19)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_6_MASK (0x7 << 16)
|
||||||
|
-#define IMX6Q_GPR13_SATA_SPEED_MASK BIT(15)
|
||||||
|
-#define IMX6Q_GPR13_SATA_SPEED_1P5G 0x0
|
||||||
|
-#define IMX6Q_GPR13_SATA_SPEED_3P0G BIT(15)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_5 BIT(14)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_4_MASK (0x7 << 11)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_4_16_16 (0x0 << 11)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_4_14_16 (0x1 << 11)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_4_12_16 (0x2 << 11)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_4_10_16 (0x3 << 11)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_4_9_16 (0x4 << 11)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_4_8_16 (0x5 << 11)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_3_MASK (0xf << 7)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_3_OFF 0x7
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_2_MASK (0x1f << 2)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_2_OFF 0x2
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_1_MASK (0x3 << 0)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_1_FAST (0x0 << 0)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_1_MED (0x1 << 0)
|
||||||
|
-#define IMX6Q_GPR13_SATA_PHY_1_SLOW (0x2 << 0)
|
||||||
|
-
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK (0x7 << 24)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_0_5_DB (0x0 << 24)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_1_0_DB (0x1 << 24)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_1_5_DB (0x2 << 24)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_2_0_DB (0x3 << 24)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_2_5_DB (0x4 << 24)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB (0x5 << 24)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_3_5_DB (0x6 << 24)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_4_0_DB (0x7 << 24)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK (0x1f << 19)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1I (0x10 << 19)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1M (0x10 << 19)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1X (0x1a << 19)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2I (0x12 << 19)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M (0x12 << 19)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2X (0x1a << 19)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK (0x7 << 16)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_1P_1F (0x0 << 16)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_2F (0x1 << 16)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_1P_4F (0x2 << 16)
|
||||||
|
+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F (0x3 << 16)
|
||||||
|
+#define IMX6Q_GPR13_SATA_SPD_MODE_MASK BIT(15)
|
||||||
|
+#define IMX6Q_GPR13_SATA_SPD_MODE_1P5G 0x0
|
||||||
|
+#define IMX6Q_GPR13_SATA_SPD_MODE_3P0G BIT(15)
|
||||||
|
+#define IMX6Q_GPR13_SATA_MPLL_SS_EN BIT(14)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_ATTEN_MASK (0x7 << 11)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_ATTEN_16_16 (0x0 << 11)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_ATTEN_14_16 (0x1 << 11)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_ATTEN_12_16 (0x2 << 11)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_ATTEN_10_16 (0x3 << 11)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_ATTEN_9_16 (0x4 << 11)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_ATTEN_8_16 (0x5 << 11)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_MASK (0xf << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_0_00_DB (0x0 << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_0_37_DB (0x1 << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_0_74_DB (0x2 << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_1_11_DB (0x3 << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_1_48_DB (0x4 << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_1_85_DB (0x5 << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_2_22_DB (0x6 << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_2_59_DB (0x7 << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_2_96_DB (0x8 << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB (0x9 << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_3_70_DB (0xa << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_4_07_DB (0xb << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_4_44_DB (0xc << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_4_81_DB (0xd << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_5_28_DB (0xe << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_BOOST_5_75_DB (0xf << 7)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_MASK (0x1f << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_0_937_V (0x00 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_0_947_V (0x01 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_0_957_V (0x02 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_0_966_V (0x03 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_0_976_V (0x04 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_0_986_V (0x05 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_0_996_V (0x06 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_005_V (0x07 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_015_V (0x08 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_025_V (0x09 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_035_V (0x0a << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_045_V (0x0b << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_054_V (0x0c << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_064_V (0x0d << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_074_V (0x0e << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_084_V (0x0f << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_094_V (0x10 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_104_V (0x11 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_113_V (0x12 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_123_V (0x13 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_133_V (0x14 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_143_V (0x15 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_152_V (0x16 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_162_V (0x17 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_172_V (0x18 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_182_V (0x19 << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_191_V (0x1a << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_201_V (0x1b << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_211_V (0x1c << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_221_V (0x1d << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_230_V (0x1e << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_LVL_1_240_V (0x1f << 2)
|
||||||
|
+#define IMX6Q_GPR13_SATA_MPLL_CLK_EN BIT(1)
|
||||||
|
+#define IMX6Q_GPR13_SATA_TX_EDGE_RATE BIT(0)
|
||||||
|
#endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */
|
||||||
|
|
@ -0,0 +1,68 @@
|
||||||
|
From 0fb1f804269e549b556b475c8655bc862c220622 Mon Sep 17 00:00:00 2001
|
||||||
|
From: Richard Zhu <r65037@freescale.com>
|
||||||
|
Date: Tue, 16 Jul 2013 11:28:46 +0800
|
||||||
|
Subject: [PATCH] ARM: dtsi: enable ahci sata on imx6q platforms
|
||||||
|
|
||||||
|
Only imx6q has the ahci sata controller, enable
|
||||||
|
it on imx6q platforms.
|
||||||
|
|
||||||
|
Signed-off-by: Richard Zhu <r65037@freescale.com>
|
||||||
|
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
||||||
|
---
|
||||||
|
arch/arm/boot/dts/imx6q-sabreauto.dts | 4 ++++
|
||||||
|
arch/arm/boot/dts/imx6q-sabrelite.dts | 4 ++++
|
||||||
|
arch/arm/boot/dts/imx6q-sabresd.dts | 4 ++++
|
||||||
|
arch/arm/boot/dts/imx6q.dtsi | 9 +++++++++
|
||||||
|
4 files changed, 21 insertions(+)
|
||||||
|
|
||||||
|
--- a/arch/arm/boot/dts/imx6q-sabreauto.dts
|
||||||
|
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
|
||||||
|
@@ -33,3 +33,7 @@
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
+
|
||||||
|
+&sata {
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
|
||||||
|
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
|
||||||
|
@@ -65,6 +65,10 @@
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
+&sata {
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
&ecspi1 {
|
||||||
|
fsl,spi-num-chipselects = <1>;
|
||||||
|
cs-gpios = <&gpio3 19 0>;
|
||||||
|
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
|
||||||
|
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
|
||||||
|
@@ -37,3 +37,7 @@
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
+
|
||||||
|
+&sata {
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
--- a/arch/arm/boot/dts/imx6q.dtsi
|
||||||
|
+++ b/arch/arm/boot/dts/imx6q.dtsi
|
||||||
|
@@ -332,6 +332,15 @@
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
+ sata: sata@02200000 {
|
||||||
|
+ compatible = "fsl,imx6q-ahci";
|
||||||
|
+ reg = <0x02200000 0x4000>;
|
||||||
|
+ interrupts = <0 39 0x04>;
|
||||||
|
+ clocks = <&clks 154>, <&clks 187>, <&clks 105>;
|
||||||
|
+ clock-names = "sata", "sata_ref", "ahb";
|
||||||
|
+ status = "disabled";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
ipu2: ipu@02800000 {
|
||||||
|
#crtc-cells = <1>;
|
||||||
|
compatible = "fsl,imx6q-ipu";
|
||||||
|
|
@ -0,0 +1,26 @@
|
||||||
|
From 867974fc09f93bdd7f98d46ac3733934486bbf4a Mon Sep 17 00:00:00 2001
|
||||||
|
From: Tejun Heo <tj@kernel.org>
|
||||||
|
Date: Fri, 26 Jul 2013 08:57:56 -0400
|
||||||
|
Subject: [PATCH] ahci_imx: depend on CONFIG_MFD_SYSCON
|
||||||
|
|
||||||
|
ahci_imx makes use of regmap but the dependency wasn't specified in
|
||||||
|
Kconfig leading build failures if CONFIG_AHCI_IMX is enabled but
|
||||||
|
CONFIG_MFD_SYSCON is not. Add the Kconfig dependency.
|
||||||
|
|
||||||
|
Signed-off-by: Tejun Heo <tj@kernel.org>
|
||||||
|
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
|
||||||
|
---
|
||||||
|
drivers/ata/Kconfig | 2 +-
|
||||||
|
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||||
|
|
||||||
|
--- a/drivers/ata/Kconfig
|
||||||
|
+++ b/drivers/ata/Kconfig
|
||||||
|
@@ -99,7 +99,7 @@ config SATA_AHCI_PLATFORM
|
||||||
|
|
||||||
|
config AHCI_IMX
|
||||||
|
tristate "Freescale i.MX AHCI SATA support"
|
||||||
|
- depends on SATA_AHCI_PLATFORM
|
||||||
|
+ depends on SATA_AHCI_PLATFORM && MFD_SYSCON
|
||||||
|
help
|
||||||
|
This option enables support for the Freescale i.MX SoC's
|
||||||
|
onboard AHCI SATA.
|
||||||
Loading…
Reference in a new issue