ramips: rt288x: add support for the Belkin F5D8235-4 v1 board
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29617
This commit is contained in:
Gabor Juhos
parent
f50b02b559
commit
244c322d25
11 changed files with 184 additions and 1 deletions
|
|
@ -36,6 +36,9 @@ get_status_led() {
|
|||
esr-9753)
|
||||
status_led="esr-9753:orange:power"
|
||||
;;
|
||||
f5d8235-v1)
|
||||
set_usb_led "f5d8235-v1:green:usb"
|
||||
;;
|
||||
fonera20n)
|
||||
status_led="fonera20n:green:power"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -41,6 +41,7 @@ case "$FIRMWARE" in
|
|||
rt2x00_eeprom_extract "devconf" 0 272
|
||||
;;
|
||||
|
||||
f5d8235-v1 | \
|
||||
f5d8235-v2)
|
||||
rt2x00_eeprom_extract "u-boot" 262144 272
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -35,6 +35,7 @@ ramips_setup_interfaces()
|
|||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
|
||||
f5d8235-v1 | \
|
||||
rt-n15)
|
||||
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
||||
ucidef_add_switch "rtl8366s" "1" "1"
|
||||
|
|
@ -67,6 +68,7 @@ ramips_setup_macs()
|
|||
|
||||
argus-atp52b | \
|
||||
b2c | \
|
||||
f5d8235-v1 | \
|
||||
nw718 | \
|
||||
rt-n15 | \
|
||||
wl-351)
|
||||
|
|
|
|||
|
|
@ -65,6 +65,9 @@ ramips_board_name() {
|
|||
*"ESR-9753")
|
||||
name="esr-9753"
|
||||
;;
|
||||
*"F5D8235 v1")
|
||||
name="f5d8235-v1"
|
||||
;;
|
||||
*"F5D8235 v2")
|
||||
name="f5d8235-v2"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -14,6 +14,7 @@
|
|||
enum ramips_mach_type {
|
||||
RAMIPS_MACH_GENERIC,
|
||||
/* RT2880 based machines */
|
||||
RAMIPS_MACH_F5D8235_V1, /* Belkin F5D8235 v1 */
|
||||
RAMIPS_MACH_RT_N15, /* Asus RT-N15 */
|
||||
RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */
|
||||
RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */
|
||||
|
|
|
|||
|
|
@ -2,6 +2,10 @@ if RALINK_RT288X
|
|||
|
||||
menu "Ralink RT288x machine selection"
|
||||
|
||||
config RT288X_MACH_F5D8235_V1
|
||||
bool "Belkin F5D8235 V1 board support"
|
||||
select RALINK_DEV_GPIO_LEDS
|
||||
|
||||
config RT288X_MACH_RT_N15
|
||||
bool "Asus RT-N15 board support"
|
||||
select RALINK_DEV_GPIO_BUTTONS
|
||||
|
|
|
|||
|
|
@ -13,6 +13,7 @@ obj-y := irq.o setup.o rt288x.o devices.o clock.o
|
|||
|
||||
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
||||
|
||||
obj-$(CONFIG_RT288X_MACH_F5D8235_V1) += mach-f5d8235-v1.o
|
||||
obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o
|
||||
obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o
|
||||
obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,142 @@
|
|||
/*
|
||||
* Belkin F5D825 V1 board support
|
||||
*
|
||||
* Copyright (C) 2011 Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
|
||||
#include <asm/mach-ralink/machine.h>
|
||||
#include <asm/mach-ralink/dev-gpio-buttons.h>
|
||||
#include <asm/mach-ralink/dev-gpio-leds.h>
|
||||
#include <asm/mach-ralink/rt288x.h>
|
||||
#include <asm/mach-ralink/rt288x_regs.h>
|
||||
|
||||
#include "devices.h"
|
||||
|
||||
#include <linux/rtl8366.h>
|
||||
#include <linux/ethtool.h>
|
||||
|
||||
#include <asm/mach-ralink/ramips_eth_platform.h>
|
||||
|
||||
#define F5D8235_GPIO_RTL8366_SCK 2
|
||||
#define F5D8235_GPIO_RTL8366_SDA 1
|
||||
|
||||
#define F5D8235_GPIO_LED_USB_BLUE 7
|
||||
#define F5D8235_GPIO_LED_USB_ORANGE 8
|
||||
#define F5D8235_GPIO_BUTTON_WPS 0
|
||||
#define F5D8235_GPIO_BUTTON_RESET 9
|
||||
|
||||
#define F5D8235_BUTTONS_POLL_INTERVAL 20
|
||||
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
static struct mtd_partition f5d8235_partitions[] = {
|
||||
{
|
||||
.name = "uboot",
|
||||
.offset = 0,
|
||||
.size = 0x050000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "kernel and rootfs",
|
||||
.offset = 0x050000,
|
||||
.size = 0x790000,
|
||||
}, {
|
||||
.name = "rootfs",
|
||||
.offset = 0x1D0000,
|
||||
.size = 0x610000,
|
||||
}, {
|
||||
.name = "nvram",
|
||||
.offset = 0x7E0000,
|
||||
.size = 0x010000,
|
||||
}, {
|
||||
.name = "factory",
|
||||
.offset = 0x7F0000,
|
||||
.size = 0x010000,
|
||||
}
|
||||
};
|
||||
#endif /* CONFIG_MTD_PARTITIONS */
|
||||
|
||||
static struct physmap_flash_data f5d8235_flash_data = {
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
.nr_parts = ARRAY_SIZE(f5d8235_partitions),
|
||||
.parts = f5d8235_partitions,
|
||||
#endif
|
||||
};
|
||||
|
||||
static struct rtl8366_platform_data f5d8235_rtl8366s_data = {
|
||||
.gpio_sda = F5D8235_GPIO_RTL8366_SDA,
|
||||
.gpio_sck = F5D8235_GPIO_RTL8366_SCK,
|
||||
};
|
||||
|
||||
static struct platform_device f5d8235_rtl8366s_device = {
|
||||
.name = RTL8366S_DRIVER_NAME,
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &f5d8235_rtl8366s_data,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_led f5d8235_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "f5d8234-v1:blue:storage",
|
||||
.gpio = F5D8235_GPIO_LED_USB_BLUE,
|
||||
.active_low = 1,
|
||||
},{
|
||||
.name = "f5d8234-v1:orange:storage",
|
||||
.gpio = F5D8235_GPIO_LED_USB_ORANGE,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_button f5d8235_gpio_buttons[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.threshold = 3,
|
||||
.gpio = F5D8235_GPIO_BUTTON_RESET,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.desc = "wps",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.threshold = 3,
|
||||
.gpio = F5D8235_GPIO_BUTTON_WPS,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init f5d8235_init(void)
|
||||
{
|
||||
rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C);
|
||||
|
||||
rt288x_register_flash(0, &f5d8235_flash_data);
|
||||
rt288x_register_wifi();
|
||||
rt288x_register_wdt();
|
||||
|
||||
ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235_leds_gpio),
|
||||
f5d8235_leds_gpio);
|
||||
|
||||
ramips_register_gpio_buttons(-1, F5D8235_BUTTONS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(f5d8235_gpio_buttons),
|
||||
f5d8235_gpio_buttons);
|
||||
|
||||
platform_device_register(&f5d8235_rtl8366s_device);
|
||||
|
||||
rt288x_eth_data.speed = SPEED_1000;
|
||||
rt288x_eth_data.duplex = DUPLEX_FULL;
|
||||
rt288x_eth_data.tx_fc = 1;
|
||||
rt288x_eth_data.rx_fc = 1;
|
||||
rt288x_register_ethernet();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(RAMIPS_MACH_F5D8235_V1, "F5D8235_V1",
|
||||
"Belkin F5D8235 v1", f5d8235_init);
|
||||
|
|
@ -257,6 +257,10 @@ define Image/Build/Profile/F5D8235V2
|
|||
$(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
|
||||
endef
|
||||
|
||||
define Image/Build/Template/F5D8235V1
|
||||
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
|
||||
endef
|
||||
|
||||
|
||||
mtdlayout_wr5123gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
|
||||
mtdlayout_wr5123gn8m=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
|
||||
|
|
@ -265,7 +269,6 @@ define Image/Build/Profile/WR5123GN
|
|||
$(call BuildFirmware/Generic,$(1),wr512-3gn-8M,board="WR512-3GN",mtdlayout_wr5123gn8m,851968,7208960)
|
||||
endef
|
||||
|
||||
|
||||
ifeq ($(CONFIG_RALINK_RT305X),y)
|
||||
define Image/Build/Profile/Default
|
||||
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
|
||||
|
|
@ -290,6 +293,9 @@ define Image/Build/Profile/Default
|
|||
endef
|
||||
endif
|
||||
|
||||
define Image/Build/Profile/F5D8235V1
|
||||
$(call Image/Build/Template/F5D8235V1,$(1),f5d8235v1,F5D8235_V1)
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/RTN15
|
||||
$(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15)
|
||||
|
|
@ -302,6 +308,7 @@ endef
|
|||
|
||||
ifeq ($(CONFIG_RALINK_RT288X),y)
|
||||
define Image/Build/Profile/Default
|
||||
$(call Image/Build/Profile/F5D8235V1,$(1))
|
||||
$(call Image/Build/Profile/RTN15,$(1))
|
||||
$(call Image/Build/Profile/WLITX4AG300N,$(1))
|
||||
endef
|
||||
|
|
|
|||
|
|
@ -92,6 +92,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
|
|||
CONFIG_RALINK_RT288X=y
|
||||
# CONFIG_RALINK_RT305X is not set
|
||||
CONFIG_RAMIPS_WDT=y
|
||||
CONFIG_RT288X_MACH_F5D8235_V1=y
|
||||
CONFIG_RT288X_MACH_RT_N15=y
|
||||
CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
|
||||
CONFIG_RT288X_MACH_WZR_AGL300NH=y
|
||||
|
|
|
|||
18
target/linux/ramips/rt288x/profiles/belkin.mk
Normal file
18
target/linux/ramips/rt288x/profiles/belkin.mk
Normal file
|
|
@ -0,0 +1,18 @@
|
|||
#
|
||||
# Copyright (C) 2011 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
define Profile/F5D8235V1
|
||||
NAME:=Belkin F5D8235 V1
|
||||
PACKAGES:=kmod-switch-rtl8366s kmod-swconfig swconfig
|
||||
endef
|
||||
|
||||
define Profile/F5D8235_V1/Description
|
||||
Package set for Belkin F5D8235 V1
|
||||
endef
|
||||
|
||||
$(eval $(call Profile,F5D8235V1))
|
||||
|
||||
Loading…
Reference in a new issue