imx6: proper fix for io-remap
The previous patch was not the proper fix for PCI devices that require io resources. The new patch is the proper fix backported from mainline. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39133
This commit is contained in:
Luka Perkov
parent
de5d9827ef
commit
1e9161528b
4 changed files with 118 additions and 210 deletions
|
|
@ -1,106 +0,0 @@
|
||||||
From 93d2b52fe73294d59bbce3a6d4da031647b1f3b2 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Date: Tue, 22 Oct 2013 15:56:40 -0700
|
|
||||||
Subject: [PATCH] PCI: imx6: remove outbound io/mem ATU region mapping
|
|
||||||
|
|
||||||
The IMX6 iATU is used for address translation between the AXI bus
|
|
||||||
address space and PCI address space. This is used for type0 and type1
|
|
||||||
config cycles but is not necessary for outbound io/mem regions.
|
|
||||||
|
|
||||||
This patch removes the calls that inappropriately re-configures the ATU
|
|
||||||
viewport for outbound memory and IO after config cycles and removes them
|
|
||||||
altogether as they are not necessary.
|
|
||||||
|
|
||||||
This resolves issues with PCI devices behind switches and has been tested with
|
|
||||||
a Gige device behind a PLX PEX860x switch.
|
|
||||||
|
|
||||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
---
|
|
||||||
drivers/pci/host/pcie-designware.c | 41 +++---------------------------------
|
|
||||||
1 file changed, 3 insertions(+), 38 deletions(-)
|
|
||||||
|
|
||||||
--- a/drivers/pci/host/pcie-designware.c
|
|
||||||
+++ b/drivers/pci/host/pcie-designware.c
|
|
||||||
@@ -43,7 +43,6 @@
|
|
||||||
#define PCIE_ATU_VIEWPORT 0x900
|
|
||||||
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
|
|
||||||
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
|
|
||||||
-#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
|
|
||||||
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
|
|
||||||
#define PCIE_ATU_CR1 0x904
|
|
||||||
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
|
|
||||||
@@ -264,8 +263,8 @@ static void dw_pcie_prog_viewport_cfg0(s
|
|
||||||
|
|
||||||
static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
|
|
||||||
{
|
|
||||||
- /* Program viewport 1 : OUTBOUND : CFG1 */
|
|
||||||
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
|
|
||||||
+ /* Program viewport 0 : OUTBOUND : CFG1 */
|
|
||||||
+ dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
|
|
||||||
PCIE_ATU_VIEWPORT);
|
|
||||||
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
|
|
||||||
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
||||||
@@ -275,38 +274,8 @@ static void dw_pcie_prog_viewport_cfg1(s
|
|
||||||
PCIE_ATU_LIMIT);
|
|
||||||
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
|
|
||||||
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
|
|
||||||
-}
|
|
||||||
-
|
|
||||||
-static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
|
|
||||||
-{
|
|
||||||
- /* Program viewport 0 : OUTBOUND : MEM */
|
|
||||||
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
|
|
||||||
- PCIE_ATU_VIEWPORT);
|
|
||||||
- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
|
|
||||||
- dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
||||||
- dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
|
|
||||||
- dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
||||||
- dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
|
|
||||||
- PCIE_ATU_LIMIT);
|
|
||||||
- dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
|
|
||||||
- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
|
|
||||||
- PCIE_ATU_UPPER_TARGET);
|
|
||||||
-}
|
|
||||||
-
|
|
||||||
-static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
|
|
||||||
-{
|
|
||||||
- /* Program viewport 1 : OUTBOUND : IO */
|
|
||||||
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
|
|
||||||
- PCIE_ATU_VIEWPORT);
|
|
||||||
- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
|
|
||||||
+ dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
|
|
||||||
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
||||||
- dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
|
|
||||||
- dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
||||||
- dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
|
|
||||||
- PCIE_ATU_LIMIT);
|
|
||||||
- dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
|
|
||||||
- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
|
|
||||||
- PCIE_ATU_UPPER_TARGET);
|
|
||||||
}
|
|
||||||
|
|
||||||
static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
|
|
||||||
@@ -322,11 +291,9 @@ static int dw_pcie_rd_other_conf(struct
|
|
||||||
if (bus->parent->number == pp->root_bus_nr) {
|
|
||||||
dw_pcie_prog_viewport_cfg0(pp, busdev);
|
|
||||||
ret = cfg_read(pp->va_cfg0_base + address, where, size, val);
|
|
||||||
- dw_pcie_prog_viewport_mem_outbound(pp);
|
|
||||||
} else {
|
|
||||||
dw_pcie_prog_viewport_cfg1(pp, busdev);
|
|
||||||
ret = cfg_read(pp->va_cfg1_base + address, where, size, val);
|
|
||||||
- dw_pcie_prog_viewport_io_outbound(pp);
|
|
||||||
}
|
|
||||||
|
|
||||||
return ret;
|
|
||||||
@@ -345,11 +312,9 @@ static int dw_pcie_wr_other_conf(struct
|
|
||||||
if (bus->parent->number == pp->root_bus_nr) {
|
|
||||||
dw_pcie_prog_viewport_cfg0(pp, busdev);
|
|
||||||
ret = cfg_write(pp->va_cfg0_base + address, where, size, val);
|
|
||||||
- dw_pcie_prog_viewport_mem_outbound(pp);
|
|
||||||
} else {
|
|
||||||
dw_pcie_prog_viewport_cfg1(pp, busdev);
|
|
||||||
ret = cfg_write(pp->va_cfg1_base + address, where, size, val);
|
|
||||||
- dw_pcie_prog_viewport_io_outbound(pp);
|
|
||||||
}
|
|
||||||
|
|
||||||
return ret;
|
|
||||||
|
|
@ -0,0 +1,59 @@
|
||||||
|
From: Pratyush Anand <pratyush.anand@st.com>
|
||||||
|
|
||||||
|
pp->io_base which is the input of the outbound IO address translation
|
||||||
|
unit should be the cpu address, it was programmed wrongly to realio
|
||||||
|
address.
|
||||||
|
|
||||||
|
We should pass global_io_offset rather than sys->io_offset to
|
||||||
|
pci_ioremap_io, so we map the new window into the first available spot
|
||||||
|
in the Linux view of the I/O space.
|
||||||
|
|
||||||
|
We must also pass cpu address instead of realio address to
|
||||||
|
pci_ioremap_io.
|
||||||
|
|
||||||
|
This patch fixes above issue. It has been tested with Lecroy PTC in AIC
|
||||||
|
mode and Pericom PI7C9X2G303EL PCIe switch, which does not work
|
||||||
|
otherwise.
|
||||||
|
|
||||||
|
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
|
||||||
|
Tested-by: Mohit Kumar <mohit.kumar@st.com>
|
||||||
|
Tested-by: Tim Harvey <tharvey@gateworks.com>
|
||||||
|
Cc: Arnd Bergmann <arnd@arndb.de>
|
||||||
|
Cc: Marek Vasut <marex@denx.de>
|
||||||
|
Cc: Richard Zhu <Hong-Xing.Zhu@freescale.com>
|
||||||
|
Cc: linux-pci@vger.kernel.org
|
||||||
|
Cc: spear-devel@list.st.com
|
||||||
|
---
|
||||||
|
drivers/pci/host/pcie-designware.c | 5 ++---
|
||||||
|
1 files changed, 2 insertions(+), 3 deletions(-)
|
||||||
|
|
||||||
|
http://thread.gmane.org/gmane.linux.kernel.pci/27204
|
||||||
|
|
||||||
|
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
|
||||||
|
--- a/drivers/pci/host/pcie-designware.c
|
||||||
|
+++ b/drivers/pci/host/pcie-designware.c
|
||||||
|
@@ -177,6 +177,7 @@ int __init dw_pcie_host_init(struct pcie
|
||||||
|
+ global_io_offset);
|
||||||
|
pp->config.io_size = resource_size(&pp->io);
|
||||||
|
pp->config.io_bus_addr = range.pci_addr;
|
||||||
|
+ pp->io_base = range.cpu_addr;
|
||||||
|
}
|
||||||
|
if (restype == IORESOURCE_MEM) {
|
||||||
|
of_pci_range_to_resource(&range, np, &pp->mem);
|
||||||
|
@@ -202,7 +203,6 @@ int __init dw_pcie_host_init(struct pcie
|
||||||
|
|
||||||
|
pp->cfg0_base = pp->cfg.start;
|
||||||
|
pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
|
||||||
|
- pp->io_base = pp->io.start;
|
||||||
|
pp->mem_base = pp->mem.start;
|
||||||
|
|
||||||
|
pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
|
||||||
|
@@ -449,7 +449,7 @@ int dw_pcie_setup(int nr, struct pci_sys
|
||||||
|
|
||||||
|
if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
|
||||||
|
sys->io_offset = global_io_offset - pp->config.io_bus_addr;
|
||||||
|
- pci_ioremap_io(sys->io_offset, pp->io.start);
|
||||||
|
+ pci_ioremap_io(global_io_offset, pp->io_base);
|
||||||
|
global_io_offset += SZ_64K;
|
||||||
|
pci_add_resource_offset(&sys->resources, &pp->io,
|
||||||
|
sys->io_offset);
|
||||||
|
|
@ -1,104 +0,0 @@
|
||||||
From: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
Subject: [PATCH] PCI: imx6: remove outbound io/mem ATU region mapping
|
|
||||||
|
|
||||||
The IMX6 iATU is used for address translation between the AXI bus
|
|
||||||
address space and PCI address space. This is used for type0 and type1
|
|
||||||
config cycles but is not necessary for outbound io/mem regions.
|
|
||||||
|
|
||||||
This patch removes the calls that inappropriately re-configures the ATU
|
|
||||||
viewport for outbound memory and IO after config cycles and removes them
|
|
||||||
altogether as they are not necessary.
|
|
||||||
|
|
||||||
This resolves issues with PCI devices behind switches and has been tested with
|
|
||||||
a Gige device behind a PLX PEX860x switch.
|
|
||||||
|
|
||||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
||||||
---
|
|
||||||
drivers/pci/host/pcie-designware.c | 41 +++---------------------------------
|
|
||||||
1 file changed, 3 insertions(+), 38 deletions(-)
|
|
||||||
|
|
||||||
--- a/drivers/pci/host/pcie-designware.c
|
|
||||||
+++ b/drivers/pci/host/pcie-designware.c
|
|
||||||
@@ -43,7 +43,6 @@
|
|
||||||
#define PCIE_ATU_VIEWPORT 0x900
|
|
||||||
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
|
|
||||||
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
|
|
||||||
-#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
|
|
||||||
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
|
|
||||||
#define PCIE_ATU_CR1 0x904
|
|
||||||
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
|
|
||||||
@@ -264,8 +263,8 @@ static void dw_pcie_prog_viewport_cfg0(s
|
|
||||||
|
|
||||||
static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
|
|
||||||
{
|
|
||||||
- /* Program viewport 1 : OUTBOUND : CFG1 */
|
|
||||||
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
|
|
||||||
+ /* Program viewport 0 : OUTBOUND : CFG1 */
|
|
||||||
+ dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
|
|
||||||
PCIE_ATU_VIEWPORT);
|
|
||||||
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
|
|
||||||
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
||||||
@@ -275,38 +274,8 @@ static void dw_pcie_prog_viewport_cfg1(s
|
|
||||||
PCIE_ATU_LIMIT);
|
|
||||||
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
|
|
||||||
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
|
|
||||||
-}
|
|
||||||
-
|
|
||||||
-static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
|
|
||||||
-{
|
|
||||||
- /* Program viewport 0 : OUTBOUND : MEM */
|
|
||||||
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
|
|
||||||
- PCIE_ATU_VIEWPORT);
|
|
||||||
- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
|
|
||||||
- dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
||||||
- dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
|
|
||||||
- dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
||||||
- dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
|
|
||||||
- PCIE_ATU_LIMIT);
|
|
||||||
- dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
|
|
||||||
- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
|
|
||||||
- PCIE_ATU_UPPER_TARGET);
|
|
||||||
-}
|
|
||||||
-
|
|
||||||
-static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
|
|
||||||
-{
|
|
||||||
- /* Program viewport 1 : OUTBOUND : IO */
|
|
||||||
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
|
|
||||||
- PCIE_ATU_VIEWPORT);
|
|
||||||
- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
|
|
||||||
+ dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
|
|
||||||
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
|
||||||
- dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
|
|
||||||
- dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
|
|
||||||
- dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
|
|
||||||
- PCIE_ATU_LIMIT);
|
|
||||||
- dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
|
|
||||||
- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
|
|
||||||
- PCIE_ATU_UPPER_TARGET);
|
|
||||||
}
|
|
||||||
|
|
||||||
static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
|
|
||||||
@@ -322,11 +291,9 @@ static int dw_pcie_rd_other_conf(struct
|
|
||||||
if (bus->parent->number == pp->root_bus_nr) {
|
|
||||||
dw_pcie_prog_viewport_cfg0(pp, busdev);
|
|
||||||
ret = cfg_read(pp->va_cfg0_base + address, where, size, val);
|
|
||||||
- dw_pcie_prog_viewport_mem_outbound(pp);
|
|
||||||
} else {
|
|
||||||
dw_pcie_prog_viewport_cfg1(pp, busdev);
|
|
||||||
ret = cfg_read(pp->va_cfg1_base + address, where, size, val);
|
|
||||||
- dw_pcie_prog_viewport_io_outbound(pp);
|
|
||||||
}
|
|
||||||
|
|
||||||
return ret;
|
|
||||||
@@ -345,11 +312,9 @@ static int dw_pcie_wr_other_conf(struct
|
|
||||||
if (bus->parent->number == pp->root_bus_nr) {
|
|
||||||
dw_pcie_prog_viewport_cfg0(pp, busdev);
|
|
||||||
ret = cfg_write(pp->va_cfg0_base + address, where, size, val);
|
|
||||||
- dw_pcie_prog_viewport_mem_outbound(pp);
|
|
||||||
} else {
|
|
||||||
dw_pcie_prog_viewport_cfg1(pp, busdev);
|
|
||||||
ret = cfg_write(pp->va_cfg1_base + address, where, size, val);
|
|
||||||
- dw_pcie_prog_viewport_io_outbound(pp);
|
|
||||||
}
|
|
||||||
|
|
||||||
return ret;
|
|
||||||
|
|
@ -0,0 +1,59 @@
|
||||||
|
From: Pratyush Anand <pratyush.anand@st.com>
|
||||||
|
|
||||||
|
pp->io_base which is the input of the outbound IO address translation
|
||||||
|
unit should be the cpu address, it was programmed wrongly to realio
|
||||||
|
address.
|
||||||
|
|
||||||
|
We should pass global_io_offset rather than sys->io_offset to
|
||||||
|
pci_ioremap_io, so we map the new window into the first available spot
|
||||||
|
in the Linux view of the I/O space.
|
||||||
|
|
||||||
|
We must also pass cpu address instead of realio address to
|
||||||
|
pci_ioremap_io.
|
||||||
|
|
||||||
|
This patch fixes above issue. It has been tested with Lecroy PTC in AIC
|
||||||
|
mode and Pericom PI7C9X2G303EL PCIe switch, which does not work
|
||||||
|
otherwise.
|
||||||
|
|
||||||
|
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
|
||||||
|
Tested-by: Mohit Kumar <mohit.kumar@st.com>
|
||||||
|
Tested-by: Tim Harvey <tharvey@gateworks.com>
|
||||||
|
Cc: Arnd Bergmann <arnd@arndb.de>
|
||||||
|
Cc: Marek Vasut <marex@denx.de>
|
||||||
|
Cc: Richard Zhu <Hong-Xing.Zhu@freescale.com>
|
||||||
|
Cc: linux-pci@vger.kernel.org
|
||||||
|
Cc: spear-devel@list.st.com
|
||||||
|
---
|
||||||
|
drivers/pci/host/pcie-designware.c | 5 ++---
|
||||||
|
1 files changed, 2 insertions(+), 3 deletions(-)
|
||||||
|
|
||||||
|
http://thread.gmane.org/gmane.linux.kernel.pci/27204
|
||||||
|
|
||||||
|
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
|
||||||
|
--- a/drivers/pci/host/pcie-designware.c
|
||||||
|
+++ b/drivers/pci/host/pcie-designware.c
|
||||||
|
@@ -177,6 +177,7 @@ int __init dw_pcie_host_init(struct pcie
|
||||||
|
+ global_io_offset);
|
||||||
|
pp->config.io_size = resource_size(&pp->io);
|
||||||
|
pp->config.io_bus_addr = range.pci_addr;
|
||||||
|
+ pp->io_base = range.cpu_addr;
|
||||||
|
}
|
||||||
|
if (restype == IORESOURCE_MEM) {
|
||||||
|
of_pci_range_to_resource(&range, np, &pp->mem);
|
||||||
|
@@ -202,7 +203,6 @@ int __init dw_pcie_host_init(struct pcie
|
||||||
|
|
||||||
|
pp->cfg0_base = pp->cfg.start;
|
||||||
|
pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
|
||||||
|
- pp->io_base = pp->io.start;
|
||||||
|
pp->mem_base = pp->mem.start;
|
||||||
|
|
||||||
|
pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
|
||||||
|
@@ -449,7 +449,7 @@ int dw_pcie_setup(int nr, struct pci_sys
|
||||||
|
|
||||||
|
if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
|
||||||
|
sys->io_offset = global_io_offset - pp->config.io_bus_addr;
|
||||||
|
- pci_ioremap_io(sys->io_offset, pp->io.start);
|
||||||
|
+ pci_ioremap_io(global_io_offset, pp->io_base);
|
||||||
|
global_io_offset += SZ_64K;
|
||||||
|
pci_add_resource_offset(&sys->resources, &pp->io,
|
||||||
|
sys->io_offset);
|
||||||
Loading…
Reference in a new issue