KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

remove 2.6.27 patches

Browse source 
SVN-Revision: 16894
This commit is contained in:
Florian Fainelli 2009-07-18 10:33:53 +00:00
parent 8050025e9d
commit 1ccffe43f2
7 changed files with 0 additions and 494 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

11
target/linux/au1000/patches-2.6.27/001-mtx1_cmdline.patch
View file

@ -1,11 +0,0 @@
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -49,7 +49,7 @@ void __init prom_init(void)
prom_argv = (char **)fw_arg1;
prom_envp = (char **)fw_arg2;
- prom_init_cmdline();
+ strcpy(arcs_cmdline, CONFIG_CMDLINE);
memsize_str = prom_getenv("memsize");
if (!memsize_str)

11
target/linux/au1000/patches-2.6.27/002-openwrt_rootfs.patch
View file

@ -1,11 +0,0 @@
--- a/arch/mips/au1000/mtx-1/platform.c
+++ b/arch/mips/au1000/mtx-1/platform.c
@@ -90,7 +90,7 @@ static struct platform_device mtx1_gpio_
static struct mtd_partition mtx1_mtd_partitions[] = {
{
- .name = "filesystem",
+ .name = "rootfs",
.size = 0x01C00000,
.offset = 0,
},

15
target/linux/au1000/patches-2.6.27/003-au1000_eth_ioctl.patch
View file

@ -1,15 +0,0 @@
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1293,9 +1293,12 @@ static void set_rx_mode(struct net_devic
}
}
+#define AU1000_KNOWN_PHY_IOCTLS (SIOCGMIIPHY & 0xfff0)
static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct au1000_private *aup = (struct au1000_private *)dev->priv;
+ if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS)
+ return -EINVAL;
if (!netif_running(dev)) return -EINVAL;

31
target/linux/au1000/patches-2.6.27/004-state_led_phy_fix.patch
View file

@ -1,31 +0,0 @@
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -184,6 +184,15 @@ struct au1000_private *au_macs[NUM_ETH_I
# undef AU1XXX_PHY1_IRQ
#endif
+#if defined(CONFIG_MIPS_MTX1)
+/*
+ * 4G MeshCube (MTX-1) board
+ * PHY is at address 31 on MAC0
+ * autodetect fails if not searched for highest address !
+ */
+# define AU1XXX_PHY_SEARCH_HIGHEST_ADDR
+#endif
+
#if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0)
# error MAC0-associated PHY attached 2nd MACs MII bus not supported yet
#endif
@@ -380,6 +389,12 @@ static int mii_probe (struct net_device
aup->old_duplex = -1;
aup->phy_dev = phydev;
+#ifdef CONFIG_MIPS_MTX1
+ /* set up ethernet jack LEDs on the 4G MeshCube (MTX-1 board) */
+ printk(KERN_INFO "MTX-1 PHY: updating LED settings\n");
+ phy_write(phydev, 0x11, 0xff80);
+#endif
+
printk(KERN_INFO "%s: attached PHY driver [%s] "
"(mii_bus:phy_addr=%s, irq=%d)\n",
dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);

20
target/linux/au1000/patches-2.6.27/005-mtx1_wdt_fix.patch
View file

@ -1,20 +0,0 @@
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -98,6 +98,8 @@ static void mtx1_wdt_reset(void)
static void mtx1_wdt_start(void)
{
+ unsigned long flags;
+
spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
if (!mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 1;
@@ -110,6 +112,8 @@ static void mtx1_wdt_start(void)
static int mtx1_wdt_stop(void)
{
+ unsigned long flags;
+
spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
if (mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 0;

10
target/linux/au1000/patches-2.6.27/006-missing_string_header.patch
View file

@ -1,10 +0,0 @@
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -32,6 +32,7 @@
#include <linux/init.h>
#include <asm/bootinfo.h>
+#include <asm/string.h>
#include <prom.h>

396
target/linux/au1000/patches-2.6.27/007-gpiolib.patch
View file

@ -1,396 +0,0 @@
--- a/arch/mips/au1000/Kconfig
+++ b/arch/mips/au1000/Kconfig
@@ -134,3 +134,4 @@ config SOC_AU1X00
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_APM_EMULATION
+ select ARCH_REQUIRE_GPIOLIB
--- a/arch/mips/au1000/common/gpio.c
+++ b/arch/mips/au1000/common/gpio.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2007-2008, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
* Architecture specific GPIO support
*
* This program is free software; you can redistribute it and/or modify it
@@ -27,122 +27,222 @@
* others have a second one : GPIO2
*/
+#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <asm/mach-au1x00/au1000.h>
-#include <asm/gpio.h>
+#include <asm/mach-au1x00/gpio.h>
-#define gpio1 sys
-#if !defined(CONFIG_SOC_AU1000)
+struct au1000_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *regbase;
+};
-static struct au1x00_gpio2 *const gpio2 = (struct au1x00_gpio2 *) GPIO2_BASE;
+#if !defined(CONFIG_SOC_AU1000)
#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
-static int au1xxx_gpio2_read(unsigned gpio)
+/*
+ * Return GPIO bank 2 level
+ */
+static int au1000_gpio2_get(struct gpio_chip *chip, unsigned offset)
{
- gpio -= AU1XXX_GPIO_BASE;
- return ((gpio2->pinstate >> gpio) & 0x01);
+ u32 mask = 1 << offset;
+ struct au1000_gpio_chip *gpch;
+
+ gpch = container_of(chip, struct au1000_gpio_chip, chip);
+ return readl(gpch->regbase + AU1000_GPIO2_ST) & mask;
}
-static void au1xxx_gpio2_write(unsigned gpio, int value)
+/*
+ * Set output GPIO bank 2 level
+ */
+static void au1000_gpio2_set(struct gpio_chip *chip,
+ unsigned offset, int value)
{
- gpio -= AU1XXX_GPIO_BASE;
-
- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
+ u32 mask = (!!value) << offset;
+ struct au1000_gpio_chip *gpch;
+ unsigned long flags;
+
+ gpch = container_of(chip, struct au1000_gpio_chip, chip);
+
+ local_irq_save(flags);
+ writel((GPIO2_OUTPUT_ENABLE_MASK << offset) | mask,
+ gpch->regbase + AU1000_GPIO2_OUT);
+ local_irq_restore(flags);
}
-static int au1xxx_gpio2_direction_input(unsigned gpio)
+/*
+ * Set GPIO bank 2 direction to input
+ */
+static int au1000_gpio2_direction_input(struct gpio_chip *chip, unsigned offset)
{
- gpio -= AU1XXX_GPIO_BASE;
- gpio2->dir &= ~(0x01 << gpio);
+ unsigned long flags;
+ u32 mask = 1 << offset;
+ u32 value;
+ struct au1000_gpio_chip *gpch;
+ void __iomem *gpdr;
+
+ gpch = container_of(chip, struct au1000_gpio_chip, chip);
+ gpdr = gpch->regbase + AU1000_GPIO2_DIR;
+
+ local_irq_save(flags);
+ value = readl(gpdr);
+ value &= ~mask;
+ writel(value, gpdr);
+ local_irq_restore(flags);
+
return 0;
}
-static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
+/*
+ * Set GPIO bank2 direction to output
+ */
+static int au1000_gpio2_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
{
- gpio -= AU1XXX_GPIO_BASE;
- gpio2->dir |= 0x01 << gpio;
- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
+ unsigned long flags;
+ u32 mask = 1 << offset;
+ u32 tmp;
+ struct au1000_gpio_chip *gpch;
+ void __iomem *gpdr;
+
+ gpch = container_of(chip, struct au1000_gpio_chip, chip);
+ gpdr = gpch->regbase + AU1000_GPIO2_DIR;
+
+ local_irq_save(flags);
+ tmp = readl(gpdr);
+ tmp |= mask;
+ writel(tmp, gpdr);
+ mask = (!!value) << offset;
+ writel((GPIO2_OUTPUT_ENABLE_MASK << offset) | mask,
+ gpch->regbase + AU1000_GPIO2_OUT);
+ local_irq_restore(flags);
+
return 0;
}
-
#endif /* !defined(CONFIG_SOC_AU1000) */
-static int au1xxx_gpio1_read(unsigned gpio)
+/*
+ * Return GPIO bank 2 level
+ */
+static int au1000_gpio1_get(struct gpio_chip *chip, unsigned offset)
{
- return (gpio1->pinstaterd >> gpio) & 0x01;
+ u32 mask = 1 << offset;
+ struct au1000_gpio_chip *gpch;
+
+ gpch = container_of(chip, struct au1000_gpio_chip, chip);
+ return readl(gpch->regbase + 0x0110) & mask;
}
-static void au1xxx_gpio1_write(unsigned gpio, int value)
+/*
+ * Set GPIO bank 1 level
+ */
+static void au1000_gpio1_set(struct gpio_chip *chip,
+ unsigned offset, int value)
{
+ unsigned long flags;
+ u32 mask = 1 << offset;
+ struct au1000_gpio_chip *gpch;
+
+ gpch = container_of(chip, struct au1000_gpio_chip, chip);
+
+ local_irq_save(flags);
if (value)
- gpio1->outputset = (0x01 << gpio);
+ writel(mask, gpch->regbase + 0x0108);
else
- /* Output a zero */
- gpio1->outputclr = (0x01 << gpio);
+ writel(mask, gpch->regbase + 0x010C);
+ local_irq_restore(flags);
}
-static int au1xxx_gpio1_direction_input(unsigned gpio)
+/*
+ * Set GPIO bank 1 direction to input
+ */
+static int au1000_gpio1_direction_input(struct gpio_chip *chip, unsigned offset)
{
- gpio1->pininputen = (0x01 << gpio);
- return 0;
-}
+ unsigned long flags;
+ u32 mask = 1 << offset;
+ u32 value;
+ struct au1000_gpio_chip *gpch;
+ void __iomem *gpdr;
+
+ gpch = container_of(chip, struct au1000_gpio_chip, chip);
+ gpdr = gpch->regbase + 0x0110;
+
+ local_irq_save(flags);
+ value = readl(gpdr);
+ value |= mask;
+ writel(mask, gpdr);
+ local_irq_restore(flags);
-static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
-{
- gpio1->trioutclr = (0x01 & gpio);
- au1xxx_gpio1_write(gpio, value);
return 0;
}
-int au1xxx_gpio_get_value(unsigned gpio)
+/*
+ * Set GPIO bank 1 direction to output
+ */
+static int au1000_gpio1_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
{
- if (gpio >= AU1XXX_GPIO_BASE)
-#if defined(CONFIG_SOC_AU1000)
- return 0;
-#else
- return au1xxx_gpio2_read(gpio);
-#endif
+ unsigned long flags;
+ u32 mask = 1 << offset;
+ u32 tmp;
+ struct au1000_gpio_chip *gpch;
+ void __iomem *gpdr;
+
+ gpch = container_of(chip, struct au1000_gpio_chip, chip);
+ gpdr = gpch->regbase + 0x0100;
+
+ local_irq_save(flags);
+ tmp = readl(gpdr);
+ writel(tmp, gpdr);
+ if (value)
+ writel(mask, gpch->regbase + 0x0108);
else
- return au1xxx_gpio1_read(gpio);
-}
-EXPORT_SYMBOL(au1xxx_gpio_get_value);
+ writel(mask, gpch->regbase + 0x0108);
+ local_irq_restore(flags);
-void au1xxx_gpio_set_value(unsigned gpio, int value)
-{
- if (gpio >= AU1XXX_GPIO_BASE)
-#if defined(CONFIG_SOC_AU1000)
- ;
-#else
- au1xxx_gpio2_write(gpio, value);
-#endif
- else
- au1xxx_gpio1_write(gpio, value);
+ return 0;
}
-EXPORT_SYMBOL(au1xxx_gpio_set_value);
-int au1xxx_gpio_direction_input(unsigned gpio)
-{
- if (gpio >= AU1XXX_GPIO_BASE)
-#if defined(CONFIG_SOC_AU1000)
- return -ENODEV;
-#else
- return au1xxx_gpio2_direction_input(gpio);
+struct au1000_gpio_chip au1000_gpio_chip[] = {
+ [0] = {
+ .regbase = (void __iomem *)SYS_BASE,
+ .chip = {
+ .label = "au1000-gpio1",
+ .direction_input = au1000_gpio1_direction_input,
+ .direction_output = au1000_gpio1_direction_output,
+ .get = au1000_gpio1_get,
+ .set = au1000_gpio1_set,
+ .base = 0,
+ .ngpio = 32,
+ },
+ },
+#if !defined(CONFIG_SOC_AU1000)
+ [1] = {
+ .regbase = (void __iomem *)GPIO2_BASE,
+ .chip = {
+ .label = "au1000-gpio2",
+ .direction_input = au1000_gpio2_direction_input,
+ .direction_output = au1000_gpio2_direction_output,
+ .get = au1000_gpio2_get,
+ .set = au1000_gpio2_set,
+ .base = AU1XXX_GPIO_BASE,
+ .ngpio = 32,
+ },
+ },
#endif
+};
- return au1xxx_gpio1_direction_input(gpio);
-}
-EXPORT_SYMBOL(au1xxx_gpio_direction_input);
-
-int au1xxx_gpio_direction_output(unsigned gpio, int value)
+int __init au1000_gpio_init(void)
{
- if (gpio >= AU1XXX_GPIO_BASE)
-#if defined(CONFIG_SOC_AU1000)
- return -ENODEV;
-#else
- return au1xxx_gpio2_direction_output(gpio, value);
+ gpiochip_add(&au1000_gpio_chip[0].chip);
+#if !defined(CONFIG_SOC_AU1000)
+ gpiochip_add(&au1000_gpio_chip[1].chip);
#endif
- return au1xxx_gpio1_direction_output(gpio, value);
+ return 0;
}
-EXPORT_SYMBOL(au1xxx_gpio_direction_output);
+arch_initcall(au1000_gpio_init);
--- a/include/asm-mips/mach-au1x00/gpio.h
+++ b/include/asm-mips/mach-au1x00/gpio.h
@@ -1,69 +1,21 @@
#ifndef _AU1XXX_GPIO_H_
#define _AU1XXX_GPIO_H_
-#include <linux/types.h>
-
#define AU1XXX_GPIO_BASE 200
-struct au1x00_gpio2 {
- u32 dir;
- u32 reserved;
- u32 output;
- u32 pinstate;
- u32 inten;
- u32 enable;
-};
-
-extern int au1xxx_gpio_get_value(unsigned gpio);
-extern void au1xxx_gpio_set_value(unsigned gpio, int value);
-extern int au1xxx_gpio_direction_input(unsigned gpio);
-extern int au1xxx_gpio_direction_output(unsigned gpio, int value);
-
-
-/* Wrappers for the arch-neutral GPIO API */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- /* Not yet implemented */
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- /* Not yet implemented */
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- return au1xxx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return au1xxx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return au1xxx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- au1xxx_gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return irq;
-}
+#define AU1000_GPIO2_DIR 0x00
+#define AU1000_GPIO2_RSVD 0x04
+#define AU1000_GPIO2_OUT 0x08
+#define AU1000_GPIO2_ST 0x0C
+#define AU1000_GPIO2_INT 0x10
+#define AU1000_GPIO2_EN 0x14
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+
+#define gpio_to_irq(gpio) NULL
+#define irq_to_gpio(irq) NULL
-/* For cansleep */
#include <asm-generic/gpio.h>
#endif /* _AU1XXX_GPIO_H_ */