oxnas: kill old oxnas target

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This commit is contained in:
Daniel Golle 2018-05-31 17:28:38 +02:00
parent 91b5b2e20d
commit 17511a7ea8
62 changed files with 0 additions and 15085 deletions

View file

@ -1,30 +0,0 @@
#
# Copyright (C) 2013 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
ARCH:=arm
BOARD:=oxnas
BOARDNAME:=PLXTECH/Oxford NAS782x/OX82x
DEVICE_TYPE:=nas
FEATURES:=gpio nand pcie usb ramdisk rtc squashfs ubifs source-only
CPU_TYPE:=mpcore
MAINTAINER:=Daniel Golle <daniel@makrotopia.org>
KERNEL_PATCHVER:=4.4
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
kmod-ata-core kmod-ata-oxnas-sata kmod-button-hotplug \
kmod-input-gpio-keys-polled kmod-usb-ledtrig-usbport \
kmod-ledtrig-timer kmod-leds-gpio kmod-usb2-oxnas \
kmod-usb-storage uboot-envtools uboot-oxnas-ox820
KERNELNAME:=zImage dtbs
$(eval $(call BuildTarget))

View file

@ -1,27 +0,0 @@
#!/bin/sh
. /lib/functions/uci-defaults.sh
board=$(board_name)
board_config_update
case $board in
akitio)
ucidef_set_led_default "status" "status" "akitio:red:status" "0"
;;
stg212)
ucidef_set_led_default "power" "power" "zyxel:blue:status" "1"
ucidef_set_led_usbdev "usb" "USB" "zyxel:orange:copy" "1-1"
;;
kd20)
ucidef_set_led_default "power" "power" "kd20:blue:status" "1"
;;
pogoplug-pro | pogoplug-v3)
ucidef_set_led_default "power" "power" "pogoplug:blue:internal" "1"
;;
esac
board_config_flush
exit 0

View file

@ -1,22 +0,0 @@
#!/bin/sh
. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh
. /lib/oxnas.sh
board_config_update
lan_mac=""
case "$(board_name)" in
kd20)
lan_mac="$(legacy_boot_mac_adr)"
;;
esac
ucidef_set_interface_lan "eth0" "dhcp"
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
board_config_flush
exit 0

View file

@ -1,41 +0,0 @@
#!/bin/sh
# Copyright (C) 2009-2013 OpenWrt.org
. /lib/functions.sh
. /lib/functions/leds.sh
get_status_led() {
case $(board_name) in
akitio)
status_led="akitio:red:status"
;;
stg212)
status_led="zyxel:blue:status"
;;
kd20)
status_led="kd20:blue:status"
;;
pogoplug-pro | pogoplug-v3)
status_led="pogoplug:blue:internal"
;;
esac
}
set_state() {
get_status_led
case "$1" in
preinit)
status_led_blink_preinit
;;
failsafe)
status_led_blink_failsafe
;;
preinit_regular)
status_led_blink_preinit_regular
;;
done)
status_led_on
;;
esac
}

View file

@ -1,22 +0,0 @@
#!/bin/sh /etc/rc.common
START=99
get_irq() {
local name="$1"
grep -m 1 "$name" /proc/interrupts | cut -d: -f1 | sed 's, *,,'
}
set_irq_affinity() {
local name="$1"
local val="$2"
local irq="$(get_irq "$name")"
[ -n "$irq" ] || return
echo "$val" > "/proc/irq/$irq/smp_affinity"
}
start() {
set_irq_affinity ehci_hcd 2
set_irq_affinity xhci_hcd 2
set_irq_affinity sata 2
}

View file

@ -1,66 +0,0 @@
#!/bin/sh
#
# Copyright (C) 2013 OpenWrt.org
#
OXNAS_BOARD_NAME=
OXNAS_MODEL=
bootloader_cmdline_var() {
local param
local pval
for arg in $(cat /proc/device-tree/chosen/bootloader-args); do
param="$(echo $arg | cut -d'=' -f 1)"
pval="$(echo $arg | cut -d'=' -f 2-)"
if [ "$param" = "$1" ]; then
echo "$pval"
fi
done
}
legacy_boot_mac_adr() {
local macstr
local oIFS
macstr="$(bootloader_cmdline_var mac_adr)"
oIFS="$IFS"
IFS=","
set -- $macstr
printf "%02x:%02x:%02x:%02x:%02x:%02x" $1 $2 $3 $4 $5 $6
IFS="$oIFS"
}
oxnas_board_detect() {
local machine
local name
machine=$(cat /proc/device-tree/model)
case "$machine" in
*"Akitio MyCloud mini"*)
name="akitio"
;;
*"MitraStar Technology Corp. STG-212"*)
name="stg212"
;;
*"Shuttle KD20"*)
name="kd20"
;;
*"Pogoplug Pro"*)
name="pogoplug-pro"
;;
*"Pogoplug V3"*)
name="pogoplug-v3"
;;
esac
[ -z "$name" ] && name="unknown"
[ -z "$OXNAS_BOARD_NAME" ] && OXNAS_BOARD_NAME="$name"
[ -z "$OXNAS_MODEL" ] && OXNAS_MODEL="$machine"
[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
echo "$OXNAS_BOARD_NAME" > /tmp/sysinfo/board_name
echo "$OXNAS_MODEL" > /tmp/sysinfo/model
}

View file

@ -1,9 +0,0 @@
#!/bin/sh
do_oxnas() {
. /lib/oxnas.sh
oxnas_board_detect
}
boot_hook_add preinit_main do_oxnas

View file

@ -1,18 +0,0 @@
#
# Copyright (C) 2014 OpenWrt.org
#
REQUIRE_IMAGE_METADATA=1
platform_check_image() {
local board=$(board_name)
[ "$ARGC" -gt 1 ] && return 1
nand_do_platform_check $board $1
return $?
}
platform_do_upgrade() {
nand_do_upgrade $1
}

View file

@ -1,366 +0,0 @@
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OXNAS=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_LIBATA_LEDS=y
CONFIG_ARM=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
CONFIG_ARM_CPUIDLE=y
# CONFIG_ARM_CPU_SUSPEND is not set
CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
CONFIG_ARM_DMA_USE_IOMMU=y
CONFIG_ARM_GIC=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_ARM_SMMU=y
CONFIG_ARM_THUMB=y
CONFIG_ARM_UNWIND=y
CONFIG_ATAGS=y
CONFIG_ATA_LEDS=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_BLK_DEV_SD=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_CACHE_L2X0 is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_PROBE=y
CONFIG_CLKSRC_RPS_TIMER=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="console=ttyS0,115200n8 earlyprintk=serial"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
CONFIG_COMMON_CLK=y
CONFIG_COMPACTION=y
CONFIG_CONSOLE_POLL=y
CONFIG_COREDUMP=y
CONFIG_CPU_32v6=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_ABRT_EV6=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_HAS_ASID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_PM=y
CONFIG_CPU_RMAP=y
# CONFIG_CPU_SW_DOMAIN_PAN is not set
CONFIG_CPU_TLB_V6=y
CONFIG_CPU_V6K=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_ICEDCC=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_INCLUDE="debug/icedcc.S"
# CONFIG_DEBUG_UART_8250 is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=16
CONFIG_DEPRECATED_PARAM_STRUCT=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DMADEVICES=y
CONFIG_DMA_CACHE_FIQ_BROADCAST=y
# CONFIG_DMA_CACHE_RWFO is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DNOTIFY=y
CONFIG_DTC=y
CONFIG_DT_IDLE_STATES=y
CONFIG_DWMAC_GENERIC=y
CONFIG_DWMAC_OXNAS=y
# CONFIG_DWMAC_SUNXI is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_FIQ=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_SYSFS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARM_SCU=y
CONFIG_HAVE_ARM_TWD=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_BPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HOTPLUG_CPU=y
CONFIG_HZ_FIXED=0
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_BOARDINFO=y
CONFIG_ICPLUS_PHY=y
CONFIG_INPUT=y
# CONFIG_INPUT_MISC is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
CONFIG_IOMMU_SUPPORT=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_RARP is not set
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_IRQ_WORK=y
# CONFIG_ISDN is not set
# CONFIG_JFFS2_FS is not set
CONFIG_JUMP_LABEL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KGDB=y
# CONFIG_KGDB_KDB is not set
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
# CONFIG_LDM_DEBUG is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LIBFDT=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MACH_OX820=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAILBOX=y
# CONFIG_MAILBOX_TEST is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MIGRATION=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MODULE_STRIPPED is not set
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_OXNAS=y
# CONFIG_MTD_SPLIT_FIRMWARE is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NLS=y
CONFIG_NO_BOOTMEM=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=2
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IOMMU=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
CONFIG_PCIEAER=y
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIEASPM_POWERSAVE is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_PME=y
# CONFIG_PCI_DOMAINS_GENERIC is not set
CONFIG_PCI_OXNAS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_OXNAS=y
CONFIG_PLXTECH_RPS=y
CONFIG_PM=y
CONFIG_PM_CLK=y
# CONFIG_PM_DEBUG is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_POWER_SUPPLY=y
CONFIG_PPS=y
CONFIG_PRINTK_TIME=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_RAS=y
CONFIG_RATIONAL=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_STALL_COMMON=y
CONFIG_REALTEK_PHY=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_RELAY=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_CONTROLLER_OXNAS=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SCHED_INFO is not set
CONFIG_SCSI=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SERIAL_KGDB_NMI is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_SRCU=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_SWIOTLB=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_TREE_RCU=y
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_USE_OF=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_VFIO is not set
# CONFIG_VFP is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_XPS=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZONE_DMA_FLAG=0

View file

@ -1,147 +0,0 @@
/*
* Copyright (C) 2016 Daniel Golle <daniel@makrotopia.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "ox820.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Akitio MyCloud mini";
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk=serial";
};
pcie-controller@47C00000 {
status = "disabled";
};
uart@44200000 {
status = "okay";
};
sata@45900000 {
status = "okay";
nr-ports = <2>;
};
nand@41000000 {
status = "okay";
};
ethernet@40400000 {
status = "okay";
};
ehci@40200100 {
status = "okay";
};
i2c-gpio {
compatible = "i2c-gpio";
gpios = <&GPIOB 9 0 &GPIOB 10 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c>;
i2c-gpio,delay-us = <10>;
#address-cells = <1>;
#size-cells = <0>;
ds1307: rtc@68 {
compatible = "dallas,ds1307";
reg = <0x68>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_buttons>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
power {
label = "power";
gpios = <&GPIOA 11 1>;
linux,code = <KEY_POWER>;
};
reset {
label = "reset";
gpios = <&GPIOB 6 1>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
status {
label = "akitio:red:status";
gpios = <&GPIOA 29 0>;
};
};
gpio-poweroff {
compatible = "gpio-poweroff";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_poweroff>;
gpios = <&GPIOB 13 2>;
};
pinctrl {
i2c {
pinctrl_i2c: i2c-0 {
plxtech,pins =
<1 9 0 4 /* MF_B9 GPIO debounce */
1 10 0 4>; /* MF_B10 GPIO debounce */
};
};
buttons {
pinctrl_buttons: buttons-0 {
plxtech,pins =
<0 11 0 0 /* MF_A11 GPIO */
1 6 0 0>; /* MF_B6 GPIO */
};
};
leds {
pinctrl_leds: leds-0 {
plxtech,pins =
<0 29 0 0>; /* MF_A29 GPIO */
};
};
poweroff {
pinctrl_poweroff: poweroff-0 {
plxtech,pins =
<1 13 0 0>; /* MF_B13 GPIO */
};
};
};
};
&nandc {
status = "okay";
nand@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
nand-ecc-mode = "soft";
nand-ecc-algo = "hamming";
partition@0 {
label = "boot";
reg = <0x00000000 0x026c0000>;
};
partition@26c0000 {
label = "ubi";
reg = <0x026c0000 0x0d940000>;
};
};
};

View file

@ -1,173 +0,0 @@
/*
* Copyright (C) 2014 Daniel Golle <daniel@makrotopia.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "ox820.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Shuttle KD20";
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk=serial mem=256M";
};
pcie-controller@47C00000 {
status = "okay";
};
uart@44200000 {
status = "okay";
};
sata@45900000 {
status = "okay";
nr-ports = <2>;
};
ethernet@40400000 {
status = "okay";
snps,phy-addr = <1>;
phy-mode = "rgmii-id";
};
ehci@40200100 {
status = "okay";
};
i2c-gpio {
compatible = "i2c-gpio";
gpios = <&GPIOB 9 0 &GPIOB 10 0>;
i2c-gpio,delay-us = <10>;
#address-cells = <1>;
#size-cells = <0>;
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
power {
label = "power";
gpios = <&GPIOA 10 1>;
linux,code = <KEY_POWER>;
};
reset {
label = "reset";
gpios = <&GPIOA 11 1>;
linux,code = <KEY_RESTART>;
};
eject1 {
label = "eject1";
gpios = <&GPIOA 5 1>;
linux,code = <KEY_EJECTCD>;
};
eject2 {
label = "eject2";
gpios = <&GPIOA 6 1>;
linux,code = <162>;
};
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "kd20:blue:status";
gpios = <&GPIOB 16 0>;
};
status2 {
label = "kd20:red:status";
gpios = <&GPIOB 17 0>;
};
hdd1blue {
label = "kd20:blue:hdd1";
gpios = <&GPIOA 27 0>;
linux,default-trigger = "ata1";
};
hdd1red {
label = "kd20:red:hdd1";
gpios = <&GPIOB 4 0>;
};
hdd2blue {
label = "kd20:blue:hdd2";
gpios = <&GPIOB 6 0>;
linux,default-trigger = "ata2";
};
hdd2red {
label = "kd20:red:hdd2";
gpios = <&GPIOB 7 0>;
};
usb {
label = "kd20:blue:usb";
gpios = <&GPIOB 8 0>;
};
};
beeper: beeper {
compatible = "gpio-beeper";
gpios = <&GPIOB 11 0>;
};
gpio-fan {
compatible = "gpio-fan";
gpios = <&GPIOA 2 1>;
gpio-fan,speed-map = <0 0
3000 1>;
};
gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&GPIOA 9 0>;
};
};
&nandc {
status = "okay";
nand@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
nand-ecc-mode = "soft";
nand-ecc-algo = "hamming";
partition@0 {
label = "stage1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "u-boot";
reg = <0x00040000 0x00200000>;
read-only;
};
partition@240000 {
label = "initrd";
reg = <0x00240000 0x00600000>;
};
partition@840000 {
label = "kernel";
reg = <0x00840000 0x007C0000>;
};
partition@e00000 {
label = "ubi";
reg = <0x01000000 0x07000000>;
};
};
};

View file

@ -1,94 +0,0 @@
/*
* Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "ox820.dtsi"
/ {
model = "Pogoplug Pro";
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk=serial";
};
pcie-controller@47C00000 {
status = "okay";
};
uart@44200000 {
status = "okay";
};
sata@45900000 {
status = "okay";
};
ethernet@40400000 {
status = "okay";
};
ehci@40200100 {
status = "okay";
};
pinctrl {
leds {
pinctrl_leds: leds-0 {
plxtech,pins =
<0 2 0 0 /* MF_A2 */
1 16 0 0 /* MF_B16 */
1 17 0 0>; /* MF_B17 */
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
blue {
label = "pogoplug:blue:internal";
gpios = <&GPIOA 2 0>;
};
orange {
label = "pogoplug:orange:usr";
gpios = <&GPIOB 16 1>;
};
green {
label = "pogoplug:green:usr";
gpios = <&GPIOB 17 1>;
};
};
};
&nandc {
status = "okay";
nand@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
nand-ecc-mode = "soft";
nand-ecc-algo = "hamming";
partition@0 {
label = "boot";
reg = <0x00000000 0x00e00000>;
/*read-only;*/
};
partition@e00000 {
label = "ubi";
reg = <0x00e00000 0x07200000>;
};
};
};

View file

@ -1,91 +0,0 @@
/*
* Copyright (C) 2014 Daniel Golle <daniel@makrotopia.org>
* Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "ox820.dtsi"
/ {
model = "Pogoplug V3";
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk=serial";
};
uart@44200000 {
status = "okay";
};
sata@45900000 {
status = "okay";
};
ethernet@40400000 {
status = "okay";
};
ehci@40200100 {
status = "okay";
};
pinctrl {
leds {
pinctrl_leds: leds-0 {
plxtech,pins =
<0 2 0 0 /* MF_A2 */
1 16 0 0 /* MF_B16 */
1 17 0 0>; /* MF_B17 */
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
blue {
label = "pogoplug:blue:internal";
gpios = <&GPIOA 2 0>;
};
orange {
label = "pogoplug:orange:usr";
gpios = <&GPIOB 16 1>;
};
green {
label = "pogoplug:green:usr";
gpios = <&GPIOB 17 1>;
};
};
};
&nandc {
status = "okay";
nand@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
nand-ecc-mode = "soft";
nand-ecc-algo = "hamming";
partition@0 {
label = "boot";
reg = <0x00000000 0x00e00000>;
/*read-only;*/
};
partition@e00000 {
label = "ubi";
reg = <0x00e00000 0x07200000>;
};
};
};

View file

@ -1,102 +0,0 @@
/*
* Copyright (C) 2013 OpenWrt.org
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "ox820.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "MitraStar Technology Corp. STG-212";
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk=serial mem=128M";
};
uart@44200000 {
status = "okay";
};
sata@45900000 {
status = "okay";
};
ethernet@40400000 {
status = "okay";
};
ehci@40200100 {
status = "okay";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&GPIOB 11 1>;
linux,code = <KEY_RESTART>;
};
copy {
label = "copy";
gpios = <&GPIOB 13 1>;
linux,code = <KEY_COPY>;
};
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "zyxel:blue:status";
gpios = <&GPIOB 5 0>;
};
status2 {
label = "zyxel:red:status";
gpios = <&GPIOB 6 1>;
};
copy {
label = "zyxel:orange:copy";
gpios = <&GPIOB 8 1>;
};
};
i2c-gpio {
compatible = "i2c-gpio";
gpios = <&GPIOB 9 0 &GPIOB 10 0>;
i2c-gpio,delay-us = <10>;
};
};
&nandc {
status = "okay";
nand@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
nand-ecc-mode = "soft";
nand-ecc-algo = "hamming";
partition@0 {
label = "boot";
reg = <0x00000000 0x00e00000>;
read-only;
};
partition@e00000 {
label = "ubi";
reg = <0x00e00000 0x07200000>;
};
};
};

View file

@ -1,342 +0,0 @@
/*
* Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "skeleton.dtsi"
/ {
compatible = "plxtech,nas7820", "plxtech,nas782x";
interrupt-parent = <&gic>;
aliases {
serial0 = &uart0;
/* alias to determine bank index */
gpio0 = &GPIOA;
gpio1 = &GPIOB;
ethernet0 = &gmac;
};
cpus {
cpu@0 {
compatible = "arm,arm11mpcore";
};
cpu@1 {
compatible = "arm,arm11mpcore";
};
};
gic: gic@47001000 {
compatible = "arm,arm11mp-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x47001000 0x1000>,
<0x47000100 0x0100>;
};
rst: reset-controller@44E00034 {
compatible = "plxtech,nas782x-reset";
#reset-cells = <1>;
reg = <0x44E00034 0x8>; /* currently not used */
};
rps: rps@44400000 {
compatible = "plxtech,nas782x-rps";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x44400000 0x14>;
interrupts = <0 5 0x304>;
};
/* external oscillator */
osc: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
sysclk: sysclk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <4>;
clock-mult = <1>;
clocks = <&osc>;
};
plla: plla@44e001f0 {
compatible = "plxtech,nas782x-plla";
#clock-cells = <0>;
clocks = <&osc>;
reg = <0x44e001f0 0x10>;
};
pllb: pllb@44f001f0 {
compatible = "plxtech,nas782x-pllb";
#clock-cells = <0>;
clocks = <&osc>;
reg = <0x44f001f0 0x10>;
resets = <&rst 31>;
};
stdclk: stdclk {
compatible = "plxtech,nas782x-stdclk";
#clock-cells = <1>;
clocks = <&osc>;
};
twdclk: twdclk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
clocks = <&plla>;
};
gmacclk: gmacclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
};
pinctrl {
/* act as a simple bus, so children will be probed automatically */
#address-cells = <1>;
#size-cells = <1>;
compatible = "plxtech,nas782x-pinctrl", "simple-bus";
ranges;
plxtech,mux-mask = <
0xFFFFFFFF 0xCC0FFDF9 0xFC000E60 0x0F03F7E0 0xF00C0FE0
0x0003FFFF 0x00037FFF 0x0003FFF8 0x00000F00 0x0003F7F3
>;
GPIOA: gpio@44000000 {
compatible = "plxtech,nas782x-gpio";
reg = <0x44000000 0x100>, <0x44E00000 0x200>;
interrupts = <0 21 0x304>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
#gpio-lines = <32>; /* real gpio pin count */
};
GPIOB: gpio@44100000 {
compatible = "plxtech,nas782x-gpio";
reg = <0x44100000 0x100>, <0x44F00000 0x200>;
interrupts = <0 22 0x304>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
#gpio-lines = <18>; /* real gpio pin count */
};
uart0 {
pinctrl_uart0: uart0-0 {
plxtech,pins =
<0 30 5 0 /* MF_A30 PINMUX_ALT PINMUX_UARTA_SIN */
0 31 5 0>; /* MF_A31 PINMUX_ALT PINMUX_UARTA_SOUT */
};
};
gmac0 {
pinctrl_gmac0: gmac0-0 {
plxtech,pins =
<0 3 1 0 /* MF_A3 PINMUX_2 PINMUX_MACA_MDC */
0 4 1 0>; /* MF_A4 PINMUX_2 PINMUX_MACA_MDIO */
};
};
nand0 {
pinctrl_nand0: nand0-0 {
plxtech,pins =
<0 12 1 0 /* MF_A12 PINMUX_2 PINMUX_STATIC_DATA0 */
0 13 1 0 /* MF_A13 PINMUX_2 PINMUX_STATIC_DATA1 */
0 14 1 0 /* MF_A14 PINMUX_2 PINMUX_STATIC_DATA2 */
0 15 1 0 /* MF_A15 PINMUX_2 PINMUX_STATIC_DATA3 */
0 16 1 0 /* MF_A16 PINMUX_2 PINMUX_STATIC_DATA4 */
0 17 1 0 /* MF_A17 PINMUX_2 PINMUX_STATIC_DATA5 */
0 18 1 0 /* MF_A18 PINMUX_2 PINMUX_STATIC_DATA6 */
0 19 1 0 /* MF_A19 PINMUX_2 PINMUX_STATIC_DATA7 */
0 20 1 0 /* MF_A20 PINMUX_2 PINMUX_STATIC_NWE */
0 21 1 0 /* MF_A21 PINMUX_2 PINMUX_STATIC_NOE */
0 22 1 0 /* MF_A22 PINMUX_2 PINMUX_STATIC_NCS */
0 23 1 0 /* MF_A23 PINMUX_2 PINMUX_STATIC_ADDR18 */
0 24 1 0>; /* MF_A24 PINMUX_2 PINMUX_STATIC_ADDR19 */
};
};
};
pcie-controller@47C00000 {
compatible = "plxtech,nas782x-pcie";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
/* flag & space bus address host address size */
ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000
0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000
0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000
0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>;
bus-range = <0x00 0x7f>;
/* cfg inbound translator phy*/
reg = <0x47C00000 0x1000>, <0x47D00000 0x100>, <0x44A00000 0x10>;
#interrupt-cells = <1>;
/* wild card mask, match all bus address & interrupt specifier */
/* format: bus address mask, interrupt specifier mask */
/* each bit 1 means need match, 0 means ignored when match */
interrupt-map-mask = <0 0 0 0>;
/* format: a list of: bus address, interrupt specifier,
* parent interrupt controller & specifier */
interrupt-map = <0 0 0 0 &gic 0 19 0x304>;
gpios = <&GPIOB 12 0>;
clocks = <&stdclk 8>, <&pllb>;
clock-names = "pcie", "busclk";
resets = <&rst 7>, <&rst 14>;
reset-names = "pcie", "phy";
plxtech,pcie-hcsl-bit = <2>;
plxtech,pcie-ctrl-offset = <0x120>;
plxtech,pcie-outbound-offset = <0x138>;
status = "disabled";
};
pcie-controller@47E00000 {
compatible = "plxtech,nas782x-pcie";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
/* flag & space bus address host address size */
ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000
0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000
0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000
0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>;
bus-range = <0x80 0xff>;
/* cfg inbound translator phy*/
reg = <0x47E00000 0x1000>, <0x47F00000 0x100>, <0x44A00000 0x10>;
#interrupt-cells = <1>;
/* wild card mask, match all bus address & interrupt specifier */
/* format: bus address mask, interrupt specifier mask */
/* each bit 1 means need match, 0 means ignored when match */
interrupt-map-mask = <0 0 0 0>;
/* format: a list of: bus address, interrupt specifier,
* parent interrupt controller & specifier */
interrupt-map = <0 0 0 0 &gic 0 20 0x304>;
/* gpios = <&GPIOB 12 0>; */
clocks = <&stdclk 11>, <&pllb>;
clock-names = "pcie", "busclk";
resets = <&rst 23>, <&rst 14>;
reset-names = "pcie", "phy";
plxtech,pcie-hcsl-bit = <3>;
plxtech,pcie-ctrl-offset = <0x124>;
plxtech,pcie-outbound-offset = <0x174>;
status = "disabled";
};
local-timer@47000600 {
compatible = "arm,arm11mp-twd-timer";
reg = <0x47000600 0x20>;
interrupts = <1 13 0x304>; /* percpu, irq 29, cpu mask 3, level high */
clocks = <&twdclk>;
};
watchdog@47000620 {
compatible = "mpcore_wdt";
reg = <0x47000620 0x20>;
interrupts = <1 14 0x304>; /* percpu, irq 30, cpu mask 3, level high */
clocks = <&twdclk>;
};
timer@44400200 {
compatible = "plxtech,nas782x-rps-timer";
reg = <0x44400200 0x40>;
clocks = <&sysclk>;
};
uart0: uart@44200000 {
compatible = "ns16550a";
reg = <0x44200000 0x100>;
clock-frequency = <6250000>;
interrupts = <0 23 0x304>;
reg-shift = <0>;
fifo-size = <16>;
reg-io-width = <1>;
current-speed = <115200>;
no-loopback-test;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
status = "disabled";
};
sata@45900000 {
compatible = "plxtech,nas782x-sata";
/* ports dmactl sgdma */
reg = <0x45900000 0x20000>, <0x459A0000 0x40>, <0x459B0000 0x20>,
/* core phy descriptors (optional) */
<0x459E0000 0x2000>, <0x44900000 0x0C>, <0x50000000 0x1000>;
interrupts = <0 18 0x304>;
clocks = <&stdclk 4>;
resets = <&rst 11>, <&rst 12>, <&rst 13>;
reset-names = "sata", "link", "phy";
nr-ports = <1>;
status = "disabled";
};
nandc: nand-controller@41000000 {
compatible = "oxsemi,ox820-nand";
reg = <0x41000000 0x100000>;
clocks = <&stdclk 9>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand0>;
resets = <&rst 15>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
gmac: ethernet@40400000 {
compatible = "plxtech,nas782x-gmac", "snps,dwmac";
reg = <0x40400000 0x2000>;
interrupts = <0 8 0x304>, <0 17 0x304>;
interrupt-names = "macirq", "eth_wake_irq";
mac-address = [000000000000]; /* Filled in by U-Boot */
phy-mode = "rgmii";
clocks = <&stdclk 7>, <&gmacclk>;
clock-names = "gmac", "stmmaceth";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gmac0>;
resets = <&rst 6>;
status = "disabled";
};
ehci@40200100 {
compatible = "plxtech,nas782x-ehci";
reg = <0x40200100 0xf00>;
interrupts = <0 7 0x304>;
clocks = <&stdclk 6>, <&pllb>, <&stdclk 12>;
clock-names = "usb", "refsrc", "phyref";
resets = <&rst 4>, <&rst 5>, <&rst 26>;
reset-names = "host", "phya", "phyb";
/* Otherwise ref300 is used, which is derived from sata phy
* in that case, usb depends on sata initialization */
/* FIXME: how to make this dependency explicit ? */
plxtech,ehci_use_pllb;
status = "disabled";
};
};

View file

@ -1,104 +0,0 @@
CONFIG_CROSS_COMPILE="arm-linux-gnueabi-"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_CGROUPS=y
CONFIG_NAMESPACES=y
CONFIG_EMBEDDED=y
# CONFIG_COMPAT_BRK is not set
CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_OXNAS=y
# CONFIG_DMA_CACHE_RWFO is not set
CONFIG_DMA_CACHE_FIQ_BROADCAST=y
CONFIG_PCI=y
CONFIG_PCI_OXNAS=y
CONFIG_SMP=y
# CONFIG_SMP_ON_UP is not set
CONFIG_NR_CPUS=2
CONFIG_HOTPLUG_CPU=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_UACCESS_WITH_MEMCPY=y
CONFIG_USE_OF=y
CONFIG_BINFMT_MISC=y
# CONFIG_SUSPEND is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IPV6=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_MAC80211_RC_PID=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_OXNAS=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_ATA=y
CONFIG_SATA_OXNAS=y
CONFIG_NETDEVICES=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_DEBUG_FS=y
CONFIG_STMMAC_DA=y
CONFIG_ATH_CARDS=y
CONFIG_ATH9K=y
CONFIG_ATH9K_LEGACY_RATE_CONTROL=y
# CONFIG_RTL_CARDS is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_GPIO_SYSFS=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_OXNAS=y
CONFIG_USB_STORAGE=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_COMMON_CLK_DEBUG=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_FUSE_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=m
CONFIG_NTFS_RW=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_UBIFS_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_UART_8250=y
CONFIG_DEBUG_UART_PHYS=0x44200000
CONFIG_DEBUG_UART_VIRT=0xF0000000
CONFIG_DEBUG_UART_8250_SHIFT=0
CONFIG_EARLY_PRINTK=y
CONFIG_CRYPTO_ANSI_CPRNG=y

View file

@ -1,25 +0,0 @@
choice
prompt "Oxnas platform type"
default MACH_OXNAS
depends on ARCH_OXNAS
config MACH_OX820
bool "Generic NAS7820 Support"
select ARM_GIC
select GENERIC_CLOCKEVENTS
select CPU_V6K
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select PLXTECH_RPS
select CLKSRC_OF
select CLKSRC_RPS_TIMER
select USB_ARCH_HAS_EHCI
select PINCTRL_OXNAS
select PINCTRL
select RESET_CONTROLLER_OXNAS
select ARCH_WANT_LIBATA_LEDS
help
Include support for the ox820 platform.
endchoice

View file

@ -1,8 +0,0 @@
#
# Makefile for the linux kernel.
#
obj-$(CONFIG_MACH_OX820) += mach-ox820.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_DMA_CACHE_FIQ_BROADCAST) += fiq.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o

View file

@ -1,2 +0,0 @@
zreladdr-y += 0x60008000
params_phys-y := 0x60000100

View file

@ -1,87 +0,0 @@
/*
* Copyright (C) 2012 Gateworks Corporation
* Chris Lang <clang@gateworks.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#define D_CACHE_LINE_SIZE 32
.text
/*
* R8 - DMA Start Address
* R9 - DMA Length
* R10 - DMA Direction
* R11 - DMA type
* R12 - fiq_buffer Address
*/
.global ox820_fiq_end
ENTRY(ox820_fiq_start)
str r8, [r13]
ldmia r12, {r8, r9, r10}
and r11, r10, #0x3000000
and r10, r10, #0xff
teq r11, #0x1000000
beq ox820_dma_map_area
teq r11, #0x2000000
beq ox820_dma_unmap_area
/* fall through */
ox820_dma_flush_range:
bic r8, r8, #D_CACHE_LINE_SIZE - 1
1:
mcr p15, 0, r8, c7, c14, 1 @ clean & invalidate D line
add r8, r8, #D_CACHE_LINE_SIZE
cmp r8, r9
blo 1b
/* fall through */
ox820_fiq_exit:
mov r8, #0
str r8, [r12, #8]
mcr p15, 0, r8, c7, c10, 4 @ drain write buffer
subs pc, lr, #4
ox820_dma_map_area:
add r9, r9, r8
teq r10, #DMA_FROM_DEVICE
beq ox820_dma_inv_range
teq r10, #DMA_TO_DEVICE
bne ox820_dma_flush_range
/* fall through */
ox820_dma_clean_range:
bic r8, r8, #D_CACHE_LINE_SIZE - 1
1:
mcr p15, 0, r8, c7, c10, 1 @ clean D line
add r8, r8, #D_CACHE_LINE_SIZE
cmp r8, r9
blo 1b
b ox820_fiq_exit
ox820_dma_unmap_area:
add r9, r9, r8
teq r10, #DMA_TO_DEVICE
beq ox820_fiq_exit
/* fall through */
ox820_dma_inv_range:
tst r8, #D_CACHE_LINE_SIZE - 1
bic r8, r8, #D_CACHE_LINE_SIZE - 1
mcrne p15, 0, r8, c7, c10, 1 @ clean D line
tst r9, #D_CACHE_LINE_SIZE - 1
bic r9, r9, #D_CACHE_LINE_SIZE - 1
mcrne p15, 0, r9, c7, c14, 1 @ clean & invalidate D line
1:
mcr p15, 0, r8, c7, c6, 1 @ invalidate D line
add r8, r8, #D_CACHE_LINE_SIZE
cmp r8, r9
blo 1b
b ox820_fiq_exit
ox820_fiq_end:

View file

@ -1,27 +0,0 @@
/*
* linux/arch/arm/mach-ox820/headsmp.S
*
* Copyright (c) 2003 ARM Limited
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <linux/init.h>
__INIT
/*
* OX820 specific entry point for secondary CPUs.
*/
ENTRY(ox820_secondary_startup)
mov r4, #0
/* invalidate both caches and branch target cache */
mcr p15, 0, r4, c7, c7, 0
/*
* we've been released from the holding pen: secondary_stack
* should now contain the SVC stack for this core
*/
b secondary_startup

View file

@ -1,111 +0,0 @@
/*
* linux/arch/arm/mach-realview/hotplug.c
*
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/smp.h>
#include <asm/cp15.h>
#include <asm/smp_plat.h>
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
asm volatile(
" mcr p15, 0, %1, c7, c5, 0\n"
" mcr p15, 0, %1, c7, c10, 4\n"
/*
* Turn off coherency
*/
" mrc p15, 0, %0, c1, c0, 1\n"
" bic %0, %0, #0x20\n"
" mcr p15, 0, %0, c1, c0, 1\n"
" mrc p15, 0, %0, c1, c0, 0\n"
" bic %0, %0, %2\n"
" mcr p15, 0, %0, c1, c0, 0\n"
: "=&r" (v)
: "r" (0), "Ir" (CR_C)
: "cc");
}
static inline void cpu_leave_lowpower(void)
{
unsigned int v;
asm volatile( "mrc p15, 0, %0, c1, c0, 0\n"
" orr %0, %0, %1\n"
" mcr p15, 0, %0, c1, c0, 0\n"
" mrc p15, 0, %0, c1, c0, 1\n"
" orr %0, %0, #0x20\n"
" mcr p15, 0, %0, c1, c0, 1\n"
: "=&r" (v)
: "Ir" (CR_C)
: "cc");
}
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
{
/*
* there is no power-control hardware on this platform, so all
* we can do is put the core into WFI; this is safe as the calling
* code will have already disabled interrupts
*/
for (;;) {
/*
* here's the WFI
*/
asm(".word 0xe320f003\n"
:
:
: "memory", "cc");
if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
break;
}
/*
* Getting here, means that we have come out of WFI without
* having been woken up - this shouldn't happen
*
* Just note it happening - when we're woken, we can report
* its occurrence.
*/
(*spurious)++;
}
}
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
void ox820_cpu_die(unsigned int cpu)
{
int spurious = 0;
/*
* we're ready for shutdown now, so do it
*/
cpu_enter_lowpower();
platform_do_lowpower(cpu, &spurious);
/*
* bring this CPU back into the world of cache
* coherency, and then restore interrupts
*/
cpu_leave_lowpower();
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}

View file

@ -1,233 +0,0 @@
/*
* arch/arm/mach-0x820/include/mach/hardware.h
*
* Copyright (C) 2009 Oxford Semiconductor Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <linux/io.h>
#include <mach/iomap.h>
/*
* Location of flags and vectors in SRAM for controlling the booting of the
* secondary ARM11 processors.
*/
#define OXNAS_SCU_BASE_VA OXNAS_PERCPU_BASE_VA
#define OXNAS_GICN_BASE_VA(n) (OXNAS_PERCPU_BASE_VA + 0x200 + n*0x100)
#define HOLDINGPEN_CPU IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8)
#define HOLDINGPEN_LOCATION IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4)
/**
* System block reset and clock control
*/
#define SYS_CTRL_PCI_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x20)
#define SYSCTRL_CLK_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x24)
#define SYS_CTRL_CLK_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x2C)
#define SYS_CTRL_CLK_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x30)
#define SYS_CTRL_RST_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x34)
#define SYS_CTRL_RST_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x38)
#define SYS_CTRL_PLLSYS_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x48)
#define SYS_CTRL_CLK_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x64)
#define SYS_CTRL_PLLSYS_KEY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x6C)
#define SYS_CTRL_GMAC_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x78)
#define SYS_CTRL_GMAC_DELAY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x100)
/* Scratch registers */
#define SYS_CTRL_SCRATCHWORD0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4)
#define SYS_CTRL_SCRATCHWORD1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8)
#define SYS_CTRL_SCRATCHWORD2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xcc)
#define SYS_CTRL_SCRATCHWORD3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xd0)
#define SYS_CTRL_PLLA_CTRL0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F0)
#define SYS_CTRL_PLLA_CTRL1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F4)
#define SYS_CTRL_PLLA_CTRL2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F8)
#define SYS_CTRL_PLLA_CTRL3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1FC)
#define SYS_CTRL_USBHSMPH_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x40)
#define SYS_CTRL_USBHSMPH_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x44)
#define SYS_CTRL_REF300_DIV IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xF8)
#define SYS_CTRL_USBHSPHY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x84)
#define SYS_CTRL_USB_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x90)
/* pcie */
#define SYS_CTRL_HCSL_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x114)
/* System control multi-function pin function selection */
#define SYS_CTRL_SECONDARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x14)
#define SYS_CTRL_TERTIARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x8c)
#define SYS_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x94)
#define SYS_CTRL_DEBUG_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x9c)
#define SYS_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xa4)
#define SYS_CTRL_PULLUP_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xac)
/* Secure control multi-function pin function selection */
#define SEC_CTRL_SECONDARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x14)
#define SEC_CTRL_TERTIARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x8c)
#define SEC_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x94)
#define SEC_CTRL_DEBUG_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x9c)
#define SEC_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xa4)
#define SEC_CTRL_PULLUP_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xac)
#define SEC_CTRL_COPRO_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x68)
#define SEC_CTRL_SECURE_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x98)
#define SEC_CTRL_LEON_DEBUG IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF0)
#define SEC_CTRL_PLLB_DIV_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF8)
#define SEC_CTRL_PLLB_CTRL0 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F0)
#define SEC_CTRL_PLLB_CTRL1 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4)
#define SEC_CTRL_PLLB_CTRL8 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4)
#define RPSA_IRQ_SOFT IOMEM(OXNAS_RPSA_BASE_VA + 0x10)
#define RPSA_FIQ_ENABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x108)
#define RPSA_FIQ_DISABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x10C)
#define RPSA_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSA_BASE_VA + 0x1FC)
#define RPSC_IRQ_SOFT IOMEM(OXNAS_RPSC_BASE_VA + 0x10)
#define RPSC_FIQ_ENABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x108)
#define RPSC_FIQ_DISABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x10C)
#define RPSC_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSC_BASE_VA + 0x1FC)
#define RPSA_TIMER2_VAL IOMEM(OXNAS_RPSA_BASE_VA + 0x224)
#define REF300_DIV_INT_SHIFT 8
#define REF300_DIV_FRAC_SHIFT 0
#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT)
#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT)
#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16
#define USBHSPHY_SUSPENDM_MANUAL_STATE 15
#define USBHSPHY_ATE_ESET 14
#define USBHSPHY_TEST_DIN 6
#define USBHSPHY_TEST_ADD 2
#define USBHSPHY_TEST_DOUT_SEL 1
#define USBHSPHY_TEST_CLK 0
#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5
#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
#define USBAMUX_DEVICE BIT(4)
#define USBPHY_REFCLKDIV_SHIFT 2
#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT)
#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT)
#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT)
#define USB_CTRL_USB_CKO_SEL_BIT 0
#define USB_INT_CLK_XTAL 0
#define USB_INT_CLK_REF300 2
#define USB_INT_CLK_PLLB 3
#define SYS_CTRL_GMAC_CKEN_RX_IN 14
#define SYS_CTRL_GMAC_CKEN_RXN_OUT 13
#define SYS_CTRL_GMAC_CKEN_RX_OUT 12
#define SYS_CTRL_GMAC_CKEN_TX_IN 10
#define SYS_CTRL_GMAC_CKEN_TXN_OUT 9
#define SYS_CTRL_GMAC_CKEN_TX_OUT 8
#define SYS_CTRL_GMAC_RX_SOURCE 7
#define SYS_CTRL_GMAC_TX_SOURCE 6
#define SYS_CTRL_GMAC_LOW_TX_SOURCE 4
#define SYS_CTRL_GMAC_AUTO_TX_SOURCE 3
#define SYS_CTRL_GMAC_RGMII 2
#define SYS_CTRL_GMAC_SIMPLE_MUX 1
#define SYS_CTRL_GMAC_CKEN_GTX 0
#define SYS_CTRL_GMAC_TX_VARDELAY_SHIFT 0
#define SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT 8
#define SYS_CTRL_GMAC_RX_VARDELAY_SHIFT 16
#define SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT 24
#define SYS_CTRL_GMAC_TX_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_TX_VARDELAY_SHIFT)
#define SYS_CTRL_GMAC_TXN_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT)
#define SYS_CTRL_GMAC_RX_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_RX_VARDELAY_SHIFT)
#define SYS_CTRL_GMAC_RXN_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT)
#define PLLB_BYPASS 1
#define PLLB_ENSAT 3
#define PLLB_OUTDIV 4
#define PLLB_REFDIV 8
#define PLLB_DIV_INT_SHIFT 8
#define PLLB_DIV_FRAC_SHIFT 0
#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT)
#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT)
#define SYS_CTRL_CKCTRL_PCI_DIV_BIT 0
#define SYS_CTRL_CKCTRL_SLOW_BIT 8
#define SYS_CTRL_UART2_DEQ_EN 0
#define SYS_CTRL_UART3_DEQ_EN 1
#define SYS_CTRL_UART3_IQ_EN 2
#define SYS_CTRL_UART4_IQ_EN 3
#define SYS_CTRL_UART4_NOT_PCI_MODE 4
#define SYS_CTRL_PCI_CTRL1_PCI_STATIC_RQ_BIT 11
#define PLLA_REFDIV_MASK 0x3F
#define PLLA_REFDIV_SHIFT 8
#define PLLA_OUTDIV_MASK 0x7
#define PLLA_OUTDIV_SHIFT 4
/* bit numbers of clock control register */
#define SYS_CTRL_CLK_COPRO 0
#define SYS_CTRL_CLK_DMA 1
#define SYS_CTRL_CLK_CIPHER 2
#define SYS_CTRL_CLK_SD 3
#define SYS_CTRL_CLK_SATA 4
#define SYS_CTRL_CLK_I2S 5
#define SYS_CTRL_CLK_USBHS 6
#define SYS_CTRL_CLK_MACA 7
#define SYS_CTRL_CLK_MAC SYS_CTRL_CLK_MACA
#define SYS_CTRL_CLK_PCIEA 8
#define SYS_CTRL_CLK_STATIC 9
#define SYS_CTRL_CLK_MACB 10
#define SYS_CTRL_CLK_PCIEB 11
#define SYS_CTRL_CLK_REF600 12
#define SYS_CTRL_CLK_USBDEV 13
#define SYS_CTRL_CLK_DDR 14
#define SYS_CTRL_CLK_DDRPHY 15
#define SYS_CTRL_CLK_DDRCK 16
/* bit numbers of reset control register */
#define SYS_CTRL_RST_SCU 0
#define SYS_CTRL_RST_COPRO 1
#define SYS_CTRL_RST_ARM0 2
#define SYS_CTRL_RST_ARM1 3
#define SYS_CTRL_RST_USBHS 4
#define SYS_CTRL_RST_USBHSPHYA 5
#define SYS_CTRL_RST_MACA 6
#define SYS_CTRL_RST_MAC SYS_CTRL_RST_MACA
#define SYS_CTRL_RST_PCIEA 7
#define SYS_CTRL_RST_SGDMA 8
#define SYS_CTRL_RST_CIPHER 9
#define SYS_CTRL_RST_DDR 10
#define SYS_CTRL_RST_SATA 11
#define SYS_CTRL_RST_SATA_LINK 12
#define SYS_CTRL_RST_SATA_PHY 13
#define SYS_CTRL_RST_PCIEPHY 14
#define SYS_CTRL_RST_STATIC 15
#define SYS_CTRL_RST_GPIO 16
#define SYS_CTRL_RST_UART1 17
#define SYS_CTRL_RST_UART2 18
#define SYS_CTRL_RST_MISC 19
#define SYS_CTRL_RST_I2S 20
#define SYS_CTRL_RST_SD 21
#define SYS_CTRL_RST_MACB 22
#define SYS_CTRL_RST_PCIEB 23
#define SYS_CTRL_RST_VIDEO 24
#define SYS_CTRL_RST_DDR_PHY 25
#define SYS_CTRL_RST_USBHSPHYB 26
#define SYS_CTRL_RST_USBDEV 27
#define SYS_CTRL_RST_ARMDBG 29
#define SYS_CTRL_RST_PLLA 30
#define SYS_CTRL_RST_PLLB 31
#endif

View file

@ -1,33 +0,0 @@
#ifndef __MACH_OXNAS_IOMAP_H
#define __MACH_OXNAS_IOMAP_H
#include <linux/sizes.h>
#define OXNAS_UART1_BASE 0x44200000
#define OXNAS_UART1_SIZE SZ_32
#define OXNAS_UART1_BASE_VA 0xF0000000
#define OXNAS_UART2_BASE 0x44300000
#define OXNAS_UART2_SIZE SZ_32
#define OXNAS_PERCPU_BASE 0x47000000
#define OXNAS_PERCPU_SIZE SZ_8K
#define OXNAS_PERCPU_BASE_VA 0xF0002000
#define OXNAS_SYSCRTL_BASE 0x44E00000
#define OXNAS_SYSCRTL_SIZE SZ_4K
#define OXNAS_SYSCRTL_BASE_VA 0xF0004000
#define OXNAS_SECCRTL_BASE 0x44F00000
#define OXNAS_SECCRTL_SIZE SZ_4K
#define OXNAS_SECCRTL_BASE_VA 0xF0005000
#define OXNAS_RPSA_BASE 0x44400000
#define OXNAS_RPSA_SIZE SZ_4K
#define OXNAS_RPSA_BASE_VA 0xF0006000
#define OXNAS_RPSC_BASE 0x44500000
#define OXNAS_RPSC_SIZE SZ_4K
#define OXNAS_RPSC_BASE_VA 0xF0007000
#endif

View file

@ -1,7 +0,0 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
#define IRQ_SOFT 1
#define NR_IRQS 160
#endif

View file

@ -1,34 +0,0 @@
/*
* smp.h
*
* Created on: Sep 24, 2013
* Author: mahaijun
*/
#ifndef _NAS782X_SMP_H_
#define _NAS782X_SMP_H_
#include <mach/hardware.h>
extern void ox820_secondary_startup(void);
extern void ox820_cpu_die(unsigned int cpu);
static inline void write_pen_release(int val)
{
writel(val, HOLDINGPEN_CPU);
}
static inline int read_pen_release(void)
{
return readl(HOLDINGPEN_CPU);
}
extern struct smp_operations ox820_smp_ops;
extern unsigned char ox820_fiq_start, ox820_fiq_end;
extern void v6_dma_map_area(const void *, size_t, int);
extern void v6_dma_unmap_area(const void *, size_t, int);
extern void v6_dma_flush_range(const void *, const void *);
extern void v6_flush_kern_dcache_area(void *, size_t);
#endif /* _NAS782X_SMP_H_ */

View file

@ -1,6 +0,0 @@
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
#define CLOCK_TICK_RATE 6250000
#endif

View file

@ -1,32 +0,0 @@
/* linux/include/asm-arm/arch-oxnas/uncompress.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#define OXNAS_UART1_BASE 0x44200000
static inline void putc(int c)
{
static volatile unsigned char *uart =
(volatile unsigned char *)OXNAS_UART1_BASE;
while (!(uart[5] & 0x20)) { /* LSR reg THR empty bit */
barrier();
}
uart[0] = c; /* THR register */
}
static inline void flush(void)
{
}
#define arch_decomp_setup()
#define arch_decomp_wdog()
#endif /* __ASM_ARCH_UNCOMPRESS_H */

View file

@ -1,34 +0,0 @@
#ifndef _NAS782X_UTILS_H
#define _NAS782X_UTILS_H
#include <linux/io.h>
#include <mach/hardware.h>
static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask)
{
u32 val = readl_relaxed(p);
val &= ~mask;
writel_relaxed(val, p);
}
static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask)
{
u32 val = readl_relaxed(p);
val |= mask;
writel_relaxed(val, p);
}
static inline void oxnas_register_value_mask(void __iomem *p,
unsigned mask, unsigned new_value)
{
/* TODO sanity check mask & new_value = new_value */
u32 val = readl_relaxed(p);
val &= ~mask;
val |= new_value;
writel_relaxed(val, p);
}
#endif /* _NAS782X_UTILS_H */

View file

@ -1,183 +0,0 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/bug.h>
#include <linux/of_platform.h>
#include <linux/clocksource.h>
#include <linux/clk-provider.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/gfp.h>
#include <linux/reset.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/page.h>
#include <mach/iomap.h>
#include <mach/hardware.h>
#include <mach/utils.h>
#include <mach/smp.h>
static struct map_desc ox820_io_desc[] __initdata = {
{
.virtual = (unsigned long)OXNAS_PERCPU_BASE_VA,
.pfn = __phys_to_pfn(OXNAS_PERCPU_BASE),
.length = OXNAS_PERCPU_SIZE,
.type = MT_DEVICE,
},
{
.virtual = (unsigned long)OXNAS_SYSCRTL_BASE_VA,
.pfn = __phys_to_pfn(OXNAS_SYSCRTL_BASE),
.length = OXNAS_SYSCRTL_SIZE,
.type = MT_DEVICE,
},
{
.virtual = (unsigned long)OXNAS_SECCRTL_BASE_VA,
.pfn = __phys_to_pfn(OXNAS_SECCRTL_BASE),
.length = OXNAS_SECCRTL_SIZE,
.type = MT_DEVICE,
},
{
.virtual = (unsigned long)OXNAS_RPSA_BASE_VA,
.pfn = __phys_to_pfn(OXNAS_RPSA_BASE),
.length = OXNAS_RPSA_SIZE,
.type = MT_DEVICE,
},
{
.virtual = (unsigned long)OXNAS_RPSC_BASE_VA,
.pfn = __phys_to_pfn(OXNAS_RPSC_BASE),
.length = OXNAS_RPSC_SIZE,
.type = MT_DEVICE,
},
};
void __init ox820_map_common_io(void)
{
debug_ll_io_init();
iotable_init(ox820_io_desc, ARRAY_SIZE(ox820_io_desc));
}
static void __init ox820_dt_init(void)
{
int ret;
ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
NULL);
if (ret) {
pr_err("of_platform_populate failed: %d\n", ret);
BUG();
}
}
static void __init ox820_timer_init(void)
{
of_clk_init(NULL);
clocksource_probe();
}
void ox820_init_early(void)
{
}
void ox820_assert_system_reset(enum reboot_mode mode, const char *cmd)
{
u32 value;
/* Assert reset to cores as per power on defaults
* Don't touch the DDR interface as things will come to an impromptu stop
* NB Possibly should be asserting reset for PLLB, but there are timing
* concerns here according to the docs */
value = BIT(SYS_CTRL_RST_COPRO) |
BIT(SYS_CTRL_RST_USBHS) |
BIT(SYS_CTRL_RST_USBHSPHYA) |
BIT(SYS_CTRL_RST_MACA) |
BIT(SYS_CTRL_RST_PCIEA) |
BIT(SYS_CTRL_RST_SGDMA) |
BIT(SYS_CTRL_RST_CIPHER) |
BIT(SYS_CTRL_RST_SATA) |
BIT(SYS_CTRL_RST_SATA_LINK) |
BIT(SYS_CTRL_RST_SATA_PHY) |
BIT(SYS_CTRL_RST_PCIEPHY) |
BIT(SYS_CTRL_RST_STATIC) |
BIT(SYS_CTRL_RST_UART1) |
BIT(SYS_CTRL_RST_UART2) |
BIT(SYS_CTRL_RST_MISC) |
BIT(SYS_CTRL_RST_I2S) |
BIT(SYS_CTRL_RST_SD) |
BIT(SYS_CTRL_RST_MACB) |
BIT(SYS_CTRL_RST_PCIEB) |
BIT(SYS_CTRL_RST_VIDEO) |
BIT(SYS_CTRL_RST_USBHSPHYB) |
BIT(SYS_CTRL_RST_USBDEV);
writel(value, SYS_CTRL_RST_SET_CTRL);
/* Release reset to cores as per power on defaults */
writel(BIT(SYS_CTRL_RST_GPIO), SYS_CTRL_RST_CLR_CTRL);
/* Disable clocks to cores as per power-on defaults - must leave DDR
* related clocks enabled otherwise we'll stop rather abruptly. */
value =
BIT(SYS_CTRL_CLK_COPRO) |
BIT(SYS_CTRL_CLK_DMA) |
BIT(SYS_CTRL_CLK_CIPHER) |
BIT(SYS_CTRL_CLK_SD) |
BIT(SYS_CTRL_CLK_SATA) |
BIT(SYS_CTRL_CLK_I2S) |
BIT(SYS_CTRL_CLK_USBHS) |
BIT(SYS_CTRL_CLK_MAC) |
BIT(SYS_CTRL_CLK_PCIEA) |
BIT(SYS_CTRL_CLK_STATIC) |
BIT(SYS_CTRL_CLK_MACB) |
BIT(SYS_CTRL_CLK_PCIEB) |
BIT(SYS_CTRL_CLK_REF600) |
BIT(SYS_CTRL_CLK_USBDEV);
writel(value, SYS_CTRL_CLK_CLR_CTRL);
/* Enable clocks to cores as per power-on defaults */
/* Set sys-control pin mux'ing as per power-on defaults */
writel(0, SYS_CTRL_SECONDARY_SEL);
writel(0, SYS_CTRL_TERTIARY_SEL);
writel(0, SYS_CTRL_QUATERNARY_SEL);
writel(0, SYS_CTRL_DEBUG_SEL);
writel(0, SYS_CTRL_ALTERNATIVE_SEL);
writel(0, SYS_CTRL_PULLUP_SEL);
writel(0, SEC_CTRL_SECONDARY_SEL);
writel(0, SEC_CTRL_TERTIARY_SEL);
writel(0, SEC_CTRL_QUATERNARY_SEL);
writel(0, SEC_CTRL_DEBUG_SEL);
writel(0, SEC_CTRL_ALTERNATIVE_SEL);
writel(0, SEC_CTRL_PULLUP_SEL);
/* No need to save any state, as the ROM loader can determine whether
* reset is due to power cycling or programatic action, just hit the
* (self-clearing) CPU reset bit of the block reset register */
value =
BIT(SYS_CTRL_RST_SCU) |
BIT(SYS_CTRL_RST_ARM0) |
BIT(SYS_CTRL_RST_ARM1);
writel(value, SYS_CTRL_RST_SET_CTRL);
}
static const char * const ox820_dt_board_compat[] = {
"plxtech,nas7820",
"plxtech,nas7821",
"plxtech,nas7825",
NULL
};
DT_MACHINE_START(OX820_DT, "PLXTECH NAS782X SoC (Flattened Device Tree)")
.map_io = ox820_map_common_io,
.smp = smp_ops(ox820_smp_ops),
.init_early = ox820_init_early,
.init_time = ox820_timer_init,
.init_machine = ox820_dt_init,
.restart = ox820_assert_system_reset,
.dt_compat = ox820_dt_board_compat,
MACHINE_END

View file

@ -1,315 +0,0 @@
/*
* arch/arm/mach-ox820/platsmp.c
*
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/device.h>
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/cache.h>
#include <asm/cacheflush.h>
#include <asm/smp_scu.h>
#include <asm/tlbflush.h>
#include <asm/cputype.h>
#include <linux/delay.h>
#include <asm/fiq.h>
#include <linux/irqchip/arm-gic.h>
#include <mach/iomap.h>
#include <mach/smp.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#ifdef CONFIG_DMA_CACHE_FIQ_BROADCAST
#define FIQ_GENERATE 0x00000002
#define OXNAS_MAP_AREA 0x01000000
#define OXNAS_UNMAP_AREA 0x02000000
#define OXNAS_FLUSH_RANGE 0x03000000
struct fiq_req {
union {
struct {
const void *addr;
size_t size;
} map;
struct {
const void *addr;
size_t size;
} unmap;
struct {
const void *start;
const void *end;
} flush;
};
volatile uint flags;
void __iomem *reg;
} ____cacheline_aligned;
static struct fiq_handler fh = {
.name = "oxnas-fiq"
};
DEFINE_PER_CPU(struct fiq_req, fiq_data);
static inline void ox820_set_fiq_regs(unsigned int cpu)
{
struct pt_regs FIQ_regs;
struct fiq_req *fiq_req = &per_cpu(fiq_data, !cpu);
FIQ_regs.ARM_r8 = 0;
FIQ_regs.ARM_ip = (unsigned int)fiq_req;
FIQ_regs.ARM_sp = (int)(cpu ? RPSC_IRQ_SOFT : RPSA_IRQ_SOFT);
fiq_req->reg = cpu ? RPSC_IRQ_SOFT : RPSA_IRQ_SOFT;
set_fiq_regs(&FIQ_regs);
}
static void __init ox820_init_fiq(void)
{
void *fiqhandler_start;
unsigned int fiqhandler_length;
int ret;
fiqhandler_start = &ox820_fiq_start;
fiqhandler_length = &ox820_fiq_end - &ox820_fiq_start;
ret = claim_fiq(&fh);
if (ret)
return;
set_fiq_handler(fiqhandler_start, fiqhandler_length);
writel(IRQ_SOFT, RPSA_FIQ_IRQ_TO_FIQ);
writel(1, RPSA_FIQ_ENABLE);
writel(IRQ_SOFT, RPSC_FIQ_IRQ_TO_FIQ);
writel(1, RPSC_FIQ_ENABLE);
}
void fiq_dma_map_area(const void *addr, size_t size, int dir)
{
unsigned long flags;
struct fiq_req *req;
raw_local_irq_save(flags);
/* currently, not possible to take cpu0 down, so only check cpu1 */
if (!cpu_online(1)) {
raw_local_irq_restore(flags);
v6_dma_map_area(addr, size, dir);
return;
}
req = this_cpu_ptr(&fiq_data);
req->map.addr = addr;
req->map.size = size;
req->flags = dir | OXNAS_MAP_AREA;
smp_mb();
writel_relaxed(FIQ_GENERATE, req->reg);
v6_dma_map_area(addr, size, dir);
while (req->flags)
barrier();
raw_local_irq_restore(flags);
}
void fiq_dma_unmap_area(const void *addr, size_t size, int dir)
{
unsigned long flags;
struct fiq_req *req;
raw_local_irq_save(flags);
/* currently, not possible to take cpu0 down, so only check cpu1 */
if (!cpu_online(1)) {
raw_local_irq_restore(flags);
v6_dma_unmap_area(addr, size, dir);
return;
}
req = this_cpu_ptr(&fiq_data);
req->unmap.addr = addr;
req->unmap.size = size;
req->flags = dir | OXNAS_UNMAP_AREA;
smp_mb();
writel_relaxed(FIQ_GENERATE, req->reg);
v6_dma_unmap_area(addr, size, dir);
while (req->flags)
barrier();
raw_local_irq_restore(flags);
}
void fiq_dma_flush_range(const void *start, const void *end)
{
unsigned long flags;
struct fiq_req *req;
raw_local_irq_save(flags);
/* currently, not possible to take cpu0 down, so only check cpu1 */
if (!cpu_online(1)) {
raw_local_irq_restore(flags);
v6_dma_flush_range(start, end);
return;
}
req = this_cpu_ptr(&fiq_data);
req->flush.start = start;
req->flush.end = end;
req->flags = OXNAS_FLUSH_RANGE;
smp_mb();
writel_relaxed(FIQ_GENERATE, req->reg);
v6_dma_flush_range(start, end);
while (req->flags)
barrier();
raw_local_irq_restore(flags);
}
void fiq_flush_kern_dcache_area(void *addr, size_t size)
{
fiq_dma_flush_range(addr, addr + size);
}
#else
#define ox820_set_fiq_regs(cpu) do {} while (0) /* nothing */
#define ox820_init_fiq() do {} while (0) /* nothing */
#endif /* DMA_CACHE_FIQ_BROADCAST */
static DEFINE_SPINLOCK(boot_lock);
void ox820_secondary_init(unsigned int cpu)
{
/*
* Setup Secondary Core FIQ regs
*/
ox820_set_fiq_regs(1);
/*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
*/
write_pen_release(-1);
/*
* Synchronise with the boot thread.
*/
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
}
int ox820_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
/*
* Set synchronisation state between this boot processor
* and the secondary one
*/
spin_lock(&boot_lock);
/*
* This is really belt and braces; we hold unintended secondary
* CPUs in the holding pen until we're ready for them. However,
* since we haven't sent them a soft interrupt, they shouldn't
* be there.
*/
write_pen_release(cpu);
writel(1, IOMEM(OXNAS_GICN_BASE_VA(cpu) + GIC_CPU_CTRL));
/*
* Send the secondary CPU a soft interrupt, thereby causing
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
smp_rmb();
if (read_pen_release() == -1)
break;
udelay(10);
}
/*
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
spin_unlock(&boot_lock);
return read_pen_release() != -1 ? -ENOSYS : 0;
}
void *scu_base_addr(void)
{
return IOMEM(OXNAS_SCU_BASE_VA);
}
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
static void __init ox820_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
}
static void __init ox820_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base_addr());
/*
* Write the address of secondary startup into the
* system-wide flags register. The BootMonitor waits
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
writel(virt_to_phys(ox820_secondary_startup),
HOLDINGPEN_LOCATION);
ox820_init_fiq();
ox820_set_fiq_regs(0);
}
struct smp_operations ox820_smp_ops __initdata = {
.smp_init_cpus = ox820_smp_init_cpus,
.smp_prepare_cpus = ox820_smp_prepare_cpus,
.smp_secondary_init = ox820_secondary_init,
.smp_boot_secondary = ox820_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = ox820_cpu_die,
#endif
};

File diff suppressed because it is too large Load diff

View file

@ -1,297 +0,0 @@
/*
* Copyright (C) 2010 Broadcom
* Copyright (C) 2012 Stephen Warren
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/delay.h>
#include <linux/stringify.h>
#include <linux/reset.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/utils.h>
#define MHZ (1000 * 1000)
struct clk_oxnas_pllb {
struct clk_hw hw;
struct device_node *devnode;
struct reset_control *rstc;
};
#define to_clk_oxnas_pllb(_hw) container_of(_hw, struct clk_oxnas_pllb, hw)
static unsigned long plla_clk_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
unsigned long fin = parent_rate;
unsigned long pll0;
unsigned long fbdiv, refdiv, outdiv;
pll0 = readl_relaxed(SYS_CTRL_PLLA_CTRL0);
refdiv = (pll0 >> PLLA_REFDIV_SHIFT) & PLLA_REFDIV_MASK;
refdiv += 1;
outdiv = (pll0 >> PLLA_OUTDIV_SHIFT) & PLLA_OUTDIV_MASK;
outdiv += 1;
fbdiv = readl_relaxed(SYS_CTRL_PLLA_CTRL1);
/* seems we will not be here when pll is bypassed, so ignore this
* case */
return fin / MHZ * fbdiv / (refdiv * outdiv) / 32768 * MHZ;
}
static const char *pll_clk_parents[] = {
"oscillator",
};
static struct clk_ops plla_ops = {
.recalc_rate = plla_clk_recalc_rate,
};
static struct clk_init_data clk_plla_init = {
.name = "plla",
.ops = &plla_ops,
.parent_names = pll_clk_parents,
.num_parents = ARRAY_SIZE(pll_clk_parents),
};
static struct clk_hw plla_hw = {
.init = &clk_plla_init,
};
static int pllb_clk_is_prepared(struct clk_hw *hw)
{
struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw);
return !!pllb->rstc;
}
static int pllb_clk_prepare(struct clk_hw *hw)
{
struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw);
pllb->rstc = of_reset_control_get(pllb->devnode, NULL);
return IS_ERR(pllb->rstc) ? PTR_ERR(pllb->rstc) : 0;
}
static void pllb_clk_unprepare(struct clk_hw *hw)
{
struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw);
BUG_ON(IS_ERR(pllb->rstc));
reset_control_put(pllb->rstc);
pllb->rstc = NULL;
}
static int pllb_clk_enable(struct clk_hw *hw)
{
struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw);
BUG_ON(IS_ERR(pllb->rstc));
/* put PLL into bypass */
oxnas_register_set_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS));
wmb();
udelay(10);
reset_control_assert(pllb->rstc);
udelay(10);
/* set PLL B control information */
writel((1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV),
SEC_CTRL_PLLB_CTRL0);
reset_control_deassert(pllb->rstc);
udelay(100);
oxnas_register_clear_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS));
return 0;
}
static void pllb_clk_disable(struct clk_hw *hw)
{
struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw);
BUG_ON(IS_ERR(pllb->rstc));
/* put PLL into bypass */
oxnas_register_set_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS));
wmb();
udelay(10);
reset_control_assert(pllb->rstc);
}
static struct clk_ops pllb_ops = {
.prepare = pllb_clk_prepare,
.unprepare = pllb_clk_unprepare,
.is_prepared = pllb_clk_is_prepared,
.enable = pllb_clk_enable,
.disable = pllb_clk_disable,
};
static struct clk_init_data clk_pllb_init = {
.name = "pllb",
.ops = &pllb_ops,
.parent_names = pll_clk_parents,
.num_parents = ARRAY_SIZE(pll_clk_parents),
};
/* standard gate clock */
struct clk_std {
struct clk_hw hw;
signed char bit;
};
#define NUM_STD_CLKS 17
#define to_stdclk(_hw) container_of(_hw, struct clk_std, hw)
static int std_clk_is_enabled(struct clk_hw *hw)
{
struct clk_std *std = to_stdclk(hw);
return readl_relaxed(SYSCTRL_CLK_STAT) & BIT(std->bit);
}
static int std_clk_enable(struct clk_hw *hw)
{
struct clk_std *std = to_stdclk(hw);
writel(BIT(std->bit), SYS_CTRL_CLK_SET_CTRL);
return 0;
}
static void std_clk_disable(struct clk_hw *hw)
{
struct clk_std *std = to_stdclk(hw);
writel(BIT(std->bit), SYS_CTRL_CLK_CLR_CTRL);
}
static struct clk_ops std_clk_ops = {
.enable = std_clk_enable,
.disable = std_clk_disable,
.is_enabled = std_clk_is_enabled,
};
static const char *std_clk_parents[] = {
"oscillator",
};
static const char *eth_parents[] = {
"gmacclk",
};
#define DECLARE_STD_CLKP(__clk, __bit, __parent) \
static struct clk_init_data clk_##__clk##_init = { \
.name = __stringify(__clk), \
.ops = &std_clk_ops, \
.parent_names = __parent, \
.num_parents = ARRAY_SIZE(__parent), \
}; \
\
static struct clk_std clk_##__clk = { \
.bit = __bit, \
.hw = { \
.init = &clk_##__clk##_init, \
}, \
}
#define DECLARE_STD_CLK(__clk, __bit) DECLARE_STD_CLKP(__clk, __bit, \
std_clk_parents)
DECLARE_STD_CLK(leon, 0);
DECLARE_STD_CLK(dma_sgdma, 1);
DECLARE_STD_CLK(cipher, 2);
DECLARE_STD_CLK(sd, 3);
DECLARE_STD_CLK(sata, 4);
DECLARE_STD_CLK(audio, 5);
DECLARE_STD_CLK(usbmph, 6);
DECLARE_STD_CLKP(etha, 7, eth_parents);
DECLARE_STD_CLK(pciea, 8);
DECLARE_STD_CLK(static, 9);
DECLARE_STD_CLK(ethb, 10);
DECLARE_STD_CLK(pcieb, 11);
DECLARE_STD_CLK(ref600, 12);
DECLARE_STD_CLK(usbdev, 13);
struct clk_hw *std_clk_hw_tbl[] = {
&clk_leon.hw,
&clk_dma_sgdma.hw,
&clk_cipher.hw,
&clk_sd.hw,
&clk_sata.hw,
&clk_audio.hw,
&clk_usbmph.hw,
&clk_etha.hw,
&clk_pciea.hw,
&clk_static.hw,
&clk_ethb.hw,
&clk_pcieb.hw,
&clk_ref600.hw,
&clk_usbdev.hw,
};
struct clk *std_clk_tbl[ARRAY_SIZE(std_clk_hw_tbl)];
static struct clk_onecell_data std_clk_data;
void __init oxnas_init_stdclk(struct device_node *np)
{
int i;
for (i = 0; i < ARRAY_SIZE(std_clk_hw_tbl); i++) {
std_clk_tbl[i] = clk_register(NULL, std_clk_hw_tbl[i]);
BUG_ON(IS_ERR(std_clk_tbl[i]));
}
std_clk_data.clks = std_clk_tbl;
std_clk_data.clk_num = ARRAY_SIZE(std_clk_tbl);
of_clk_add_provider(np, of_clk_src_onecell_get, &std_clk_data);
}
CLK_OF_DECLARE(oxnas_pllstd, "plxtech,nas782x-stdclk", oxnas_init_stdclk);
void __init oxnas_init_plla(struct device_node *np)
{
struct clk *clk;
clk = clk_register(NULL, &plla_hw);
BUG_ON(IS_ERR(clk));
/* mark it as enabled */
clk_prepare_enable(clk);
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
CLK_OF_DECLARE(oxnas_plla, "plxtech,nas782x-plla", oxnas_init_plla);
void __init oxnas_init_pllb(struct device_node *np)
{
struct clk *clk;
struct clk_oxnas_pllb *pllb;
pllb = kmalloc(sizeof(*pllb), GFP_KERNEL);
BUG_ON(!pllb);
pllb->hw.init = &clk_pllb_init;
pllb->devnode = np;
pllb->rstc = NULL;
clk = clk_register(NULL, &pllb->hw);
BUG_ON(IS_ERR(clk));
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
CLK_OF_DECLARE(oxnas_pllb, "plxtech,nas782x-pllb", oxnas_init_pllb);

View file

@ -1,96 +0,0 @@
/*
* arch/arm/mach-ox820/rps-time.c
*
* Copyright (C) 2009 Oxford Semiconductor Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/sched_clock.h>
#include <mach/hardware.h>
enum {
TIMER_LOAD = 0,
TIMER_CURR = 4,
TIMER_CTRL = 8,
TIMER_CLRINT = 0xC,
TIMER_BITS = 24,
TIMER_MAX_VAL = (1 << TIMER_BITS) - 1,
TIMER_PERIODIC = (1 << 6),
TIMER_ENABLE = (1 << 7),
TIMER_DIV1 = (0 << 2),
TIMER_DIV16 = (1 << 2),
TIMER_DIV256 = (2 << 2),
TIMER1_OFFSET = 0,
TIMER2_OFFSET = 0x20,
};
static u64 notrace rps_read_sched_clock(void)
{
return ~readl_relaxed(RPSA_TIMER2_VAL);
}
static void __init rps_clocksource_init(void __iomem *base, ulong ref_rate)
{
int ret;
ulong clock_rate;
/* use prescale 16 */
clock_rate = ref_rate / 16;
iowrite32(TIMER_MAX_VAL, base + TIMER_LOAD);
iowrite32(TIMER_PERIODIC | TIMER_ENABLE | TIMER_DIV16,
base + TIMER_CTRL);
ret = clocksource_mmio_init(base + TIMER_CURR, "rps_clocksource_timer",
clock_rate, 250, TIMER_BITS,
clocksource_mmio_readl_down);
if (ret)
panic("can't register clocksource\n");
sched_clock_register(rps_read_sched_clock, TIMER_BITS, clock_rate);
}
static void __init rps_timer_init(struct device_node *np)
{
struct clk *refclk;
unsigned long ref_rate;
void __iomem *base;
refclk = of_clk_get(np, 0);
if (IS_ERR(refclk) || clk_prepare_enable(refclk))
panic("rps_timer_init: failed to get refclk\n");
ref_rate = clk_get_rate(refclk);
base = of_iomap(np, 0);
if (!base)
panic("rps_timer_init: failed to map io\n");
rps_clocksource_init(base + TIMER2_OFFSET, ref_rate);
}
CLOCKSOURCE_OF_DECLARE(nas782x, "plxtech,nas782x-rps-timer", rps_timer_init);

View file

@ -1,145 +0,0 @@
#include <linux/irqdomain.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irqchip.h>
struct rps_chip_data {
void __iomem *base;
struct irq_chip chip;
struct irq_domain *domain;
} rps_data;
enum {
RPS_IRQ_BASE = 64,
RPS_IRQ_COUNT = 32,
PRS_HWIRQ_BASE = 0,
RPS_STATUS = 0,
RPS_RAW_STATUS = 4,
RPS_UNMASK = 8,
RPS_MASK = 0xc,
};
/*
* Routines to acknowledge, disable and enable interrupts
*/
static void rps_mask_irq(struct irq_data *d)
{
struct rps_chip_data *chip_data = irq_data_get_irq_chip_data(d);
u32 mask = BIT(d->hwirq);
iowrite32(mask, chip_data->base + RPS_MASK);
}
static void rps_unmask_irq(struct irq_data *d)
{
struct rps_chip_data *chip_data = irq_data_get_irq_chip_data(d);
u32 mask = BIT(d->hwirq);
iowrite32(mask, chip_data->base + RPS_UNMASK);
}
static struct irq_chip rps_chip = {
.name = "RPS",
.irq_mask = rps_mask_irq,
.irq_unmask = rps_unmask_irq,
};
static int rps_irq_domain_xlate(struct irq_domain *d,
struct device_node *controller,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq,
unsigned int *out_type)
{
if (irq_domain_get_of_node(d) != controller)
return -EINVAL;
if (intsize < 1)
return -EINVAL;
*out_hwirq = intspec[0];
/* Honestly I do not know the type */
*out_type = IRQ_TYPE_LEVEL_HIGH;
return 0;
}
static int rps_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
irq_set_chip_and_handler(irq, &rps_chip, handle_level_irq);
irq_set_probe(irq);
irq_set_chip_data(irq, d->host_data);
return 0;
}
const struct irq_domain_ops rps_irq_domain_ops = {
.map = rps_irq_domain_map,
.xlate = rps_irq_domain_xlate,
};
static void rps_handle_cascade_irq(struct irq_desc *desc)
{
struct rps_chip_data *chip_data = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned int cascade_irq, rps_irq;
u32 status;
chained_irq_enter(chip, desc);
status = ioread32(chip_data->base + RPS_STATUS);
rps_irq = __ffs(status);
cascade_irq = irq_find_mapping(chip_data->domain, rps_irq);
if (unlikely(rps_irq >= RPS_IRQ_COUNT))
handle_bad_irq(desc);
else
generic_handle_irq(cascade_irq);
chained_irq_exit(chip, desc);
}
#ifdef CONFIG_OF
int __init rps_of_init(struct device_node *node, struct device_node *parent)
{
void __iomem *rps_base;
int irq_start = RPS_IRQ_BASE;
int irq_base;
int irq;
if (WARN_ON(!node))
return -ENODEV;
rps_base = of_iomap(node, 0);
WARN(!rps_base, "unable to map rps registers\n");
rps_data.base = rps_base;
irq_base = irq_alloc_descs(irq_start, 0, RPS_IRQ_COUNT, numa_node_id());
if (IS_ERR_VALUE(irq_base)) {
WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
irq_start);
irq_base = irq_start;
}
rps_data.domain = irq_domain_add_legacy(node, RPS_IRQ_COUNT, irq_base,
PRS_HWIRQ_BASE, &rps_irq_domain_ops, &rps_data);
if (WARN_ON(!rps_data.domain))
return -ENOMEM;
if (parent) {
irq = irq_of_parse_and_map(node, 0);
if (irq_set_handler_data(irq, &rps_data) != 0)
BUG();
irq_set_chained_handler(irq, rps_handle_cascade_irq);
}
return 0;
}
IRQCHIP_DECLARE(nas782x, "plxtech,nas782x-rps", rps_of_init);
#endif

View file

@ -1,206 +0,0 @@
/*
* Oxford Semiconductor OXNAS NAND driver
* Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
* Heavily based on plat_nand.c :
* Author: Vitaly Wool <vitalywool@gmail.com>
* Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
* Copyright (C) 2012 John Crispin <blogic@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/reset.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/of.h>
/* Nand commands */
#define OXNAS_NAND_CMD_ALE BIT(18)
#define OXNAS_NAND_CMD_CLE BIT(19)
#define OXNAS_NAND_MAX_CHIPS 1
struct oxnas_nand {
struct nand_hw_control base;
void __iomem *io_base;
struct clk *clk;
struct nand_chip *chips[OXNAS_NAND_MAX_CHIPS];
unsigned long ctrl;
struct mtd_partition *partitions;
int nr_partitions;
};
static uint8_t oxnas_nand_read_byte(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct oxnas_nand *oxnas = nand_get_controller_data(chip);
return readb(oxnas->io_base);
}
static void oxnas_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct oxnas_nand *oxnas = nand_get_controller_data(chip);
ioread8_rep(oxnas->io_base, buf, len);
}
static void oxnas_nand_write_buf(struct mtd_info *mtd,
const uint8_t *buf, int len)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct oxnas_nand *oxnas = nand_get_controller_data(chip);
iowrite8_rep(oxnas->io_base + oxnas->ctrl, buf, len);
}
/* Single CS command control */
static void oxnas_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct oxnas_nand *oxnas = nand_get_controller_data(chip);
if (ctrl & NAND_CTRL_CHANGE) {
if (ctrl & NAND_CLE)
oxnas->ctrl = OXNAS_NAND_CMD_CLE;
else if (ctrl & NAND_ALE)
oxnas->ctrl = OXNAS_NAND_CMD_ALE;
else
oxnas->ctrl = 0;
}
if (cmd != NAND_CMD_NONE)
writeb(cmd, oxnas->io_base + oxnas->ctrl);
}
/*
* Probe for the NAND device.
*/
static int oxnas_nand_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct device_node *nand_np;
struct oxnas_nand *oxnas;
struct nand_chip *chip;
struct mtd_info *mtd;
struct resource *res;
int nchips = 0;
int count = 0;
int err = 0;
/* Allocate memory for the device structure (and zero it) */
oxnas = devm_kzalloc(&pdev->dev, sizeof(struct nand_chip),
GFP_KERNEL);
if (!oxnas)
return -ENOMEM;
nand_hw_control_init(&oxnas->base);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
oxnas->io_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(oxnas->io_base))
return PTR_ERR(oxnas->io_base);
oxnas->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(oxnas->clk))
oxnas->clk = NULL;
/* Only a single chip node is supported */
count = of_get_child_count(np);
if (count > 1)
return -EINVAL;
clk_prepare_enable(oxnas->clk);
device_reset_optional(&pdev->dev);
for_each_child_of_node(np, nand_np) {
chip = devm_kzalloc(&pdev->dev, sizeof(struct nand_chip),
GFP_KERNEL);
if (!chip)
return -ENOMEM;
chip->controller = &oxnas->base;
nand_set_flash_node(chip, nand_np);
nand_set_controller_data(chip, oxnas);
mtd = nand_to_mtd(chip);
mtd->dev.parent = &pdev->dev;
mtd->priv = chip;
chip->cmd_ctrl = oxnas_nand_cmd_ctrl;
chip->read_buf = oxnas_nand_read_buf;
chip->read_byte = oxnas_nand_read_byte;
chip->write_buf = oxnas_nand_write_buf;
chip->chip_delay = 30;
/* Scan to find existence of the device */
err = nand_scan(mtd, 1);
if (err)
return err;
err = mtd_device_register(mtd, NULL, 0);
if (err) {
nand_release(mtd);
return err;
}
oxnas->chips[nchips] = chip;
++nchips;
}
/* Exit if no chips found */
if (!nchips)
return -ENODEV;
platform_set_drvdata(pdev, oxnas);
return 0;
}
static int oxnas_nand_remove(struct platform_device *pdev)
{
struct oxnas_nand *oxnas = platform_get_drvdata(pdev);
if (oxnas->chips[0])
nand_release(nand_to_mtd(oxnas->chips[0]));
clk_disable_unprepare(oxnas->clk);
return 0;
}
static const struct of_device_id oxnas_nand_match[] = {
{ .compatible = "oxsemi,ox820-nand" },
{},
};
MODULE_DEVICE_TABLE(of, oxnas_nand_match);
static struct platform_driver oxnas_nand_driver = {
.probe = oxnas_nand_probe,
.remove = oxnas_nand_remove,
.driver = {
.name = "oxnas_nand",
.of_match_table = oxnas_nand_match,
},
};
module_platform_driver(oxnas_nand_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
MODULE_DESCRIPTION("Oxnas NAND driver");
MODULE_ALIAS("platform:oxnas_nand");

View file

@ -1,145 +0,0 @@
/* Copyright OpenWrt.org (C) 2015.
* Copyright Altera Corporation (C) 2014. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2,
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Adopted from dwmac-socfpga.c
* Based on code found in mach-oxnas.c
*/
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/stmmac.h>
#include <mach/hardware.h>
#include "stmmac.h"
#include "stmmac_platform.h"
struct oxnas_gmac {
struct clk *clk;
};
static int oxnas_gmac_init(struct platform_device *pdev, void *priv)
{
struct oxnas_gmac *bsp_priv = priv;
int ret = 0;
unsigned value;
ret = device_reset(&pdev->dev);
if (ret)
return ret;
if (IS_ERR(bsp_priv->clk))
return PTR_ERR(bsp_priv->clk);
clk_prepare_enable(bsp_priv->clk);
value = readl(SYS_CTRL_GMAC_CTRL);
/* Enable GMII_GTXCLK to follow GMII_REFCLK, required for gigabit PHY */
value |= BIT(SYS_CTRL_GMAC_CKEN_GTX);
/* Use simple mux for 25/125 Mhz clock switching */
value |= BIT(SYS_CTRL_GMAC_SIMPLE_MUX);
/* set auto switch tx clock source */
value |= BIT(SYS_CTRL_GMAC_AUTO_TX_SOURCE);
/* enable tx & rx vardelay */
value |= BIT(SYS_CTRL_GMAC_CKEN_TX_OUT);
value |= BIT(SYS_CTRL_GMAC_CKEN_TXN_OUT);
value |= BIT(SYS_CTRL_GMAC_CKEN_TX_IN);
value |= BIT(SYS_CTRL_GMAC_CKEN_RX_OUT);
value |= BIT(SYS_CTRL_GMAC_CKEN_RXN_OUT);
value |= BIT(SYS_CTRL_GMAC_CKEN_RX_IN);
writel(value, SYS_CTRL_GMAC_CTRL);
/* set tx & rx vardelay */
value = 0;
value |= SYS_CTRL_GMAC_TX_VARDELAY(4);
value |= SYS_CTRL_GMAC_TXN_VARDELAY(2);
value |= SYS_CTRL_GMAC_RX_VARDELAY(10);
value |= SYS_CTRL_GMAC_RXN_VARDELAY(8);
writel(value, SYS_CTRL_GMAC_DELAY_CTRL);
return 0;
}
static void oxnas_gmac_exit(struct platform_device *pdev, void *priv)
{
struct reset_control *rstc;
clk_disable_unprepare(priv);
devm_clk_put(&pdev->dev, priv);
rstc = reset_control_get(&pdev->dev, NULL);
if (!IS_ERR(rstc)) {
reset_control_assert(rstc);
reset_control_put(rstc);
}
}
static int oxnas_gmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
struct stmmac_resources stmmac_res;
int ret;
struct device *dev = &pdev->dev;
struct oxnas_gmac *bsp_priv;
bsp_priv = devm_kzalloc(dev, sizeof(*bsp_priv), GFP_KERNEL);
if (!bsp_priv)
return -ENOMEM;
bsp_priv->clk = devm_clk_get(dev, "gmac");
if (IS_ERR(bsp_priv->clk))
return PTR_ERR(bsp_priv->clk);
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
if (ret)
return ret;
plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
if (IS_ERR(plat_dat))
return PTR_ERR(plat_dat);
plat_dat->bsp_priv = bsp_priv;
plat_dat->init = oxnas_gmac_init;
plat_dat->exit = oxnas_gmac_exit;
ret = oxnas_gmac_init(pdev, bsp_priv);
if (ret)
return ret;
return stmmac_dvr_probe(dev, plat_dat, &stmmac_res);
}
static const struct of_device_id oxnas_gmac_match[] = {
{ .compatible = "plxtech,nas782x-gmac" },
{ }
};
MODULE_DEVICE_TABLE(of, oxnas_gmac_match);
static struct platform_driver oxnas_gmac_driver = {
.probe = oxnas_gmac_probe,
.remove = stmmac_pltfr_remove,
.driver = {
.name = "oxnas-gmac",
.pm = &stmmac_pltfr_pm_ops,
.of_match_table = oxnas_gmac_match,
},
};
module_platform_driver(oxnas_gmac_driver);
MODULE_LICENSE("GPL v2");

View file

@ -1,676 +0,0 @@
/*
* PCIe driver for PLX NAS782X SoCs
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/mbus.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/reset.h>
#include <mach/iomap.h>
#include <mach/hardware.h>
#include <mach/utils.h>
#define VERSION_ID_MAGIC 0x082510b5
#define LINK_UP_TIMEOUT_SECONDS 1
#define NUM_CONTROLLERS 1
enum {
PCIE_DEVICE_TYPE_MASK = 0x0F,
PCIE_DEVICE_TYPE_ENDPOINT = 0,
PCIE_DEVICE_TYPE_LEGACY_ENDPOINT = 1,
PCIE_DEVICE_TYPE_ROOT = 4,
PCIE_LTSSM = BIT(4),
PCIE_READY_ENTR_L23 = BIT(9),
PCIE_LINK_UP = BIT(11),
PCIE_OBTRANS = BIT(12),
};
enum {
HCSL_BIAS_ON = BIT(0),
HCSL_PCIE_EN = BIT(1),
HCSL_PCIEA_EN = BIT(2),
HCSL_PCIEB_EN = BIT(3),
};
enum {
/* pcie phy reg offset */
PHY_ADDR = 0,
PHY_DATA = 4,
/* phy data reg bits */
READ_EN = BIT(16),
WRITE_EN = BIT(17),
CAP_DATA = BIT(18),
};
/* core config registers */
enum {
PCI_CONFIG_VERSION_DEVICEID = 0,
PCI_CONFIG_COMMAND_STATUS = 4,
};
/* inbound config registers */
enum {
IB_ADDR_XLATE_ENABLE = 0xFC,
/* bits */
ENABLE_IN_ADDR_TRANS = BIT(0),
};
/* outbound config registers, offset relative to PCIE_POM0_MEM_ADDR */
enum {
PCIE_POM0_MEM_ADDR = 0,
PCIE_POM1_MEM_ADDR = 4,
PCIE_IN0_MEM_ADDR = 8,
PCIE_IN1_MEM_ADDR = 12,
PCIE_IN_IO_ADDR = 16,
PCIE_IN_CFG0_ADDR = 20,
PCIE_IN_CFG1_ADDR = 24,
PCIE_IN_MSG_ADDR = 28,
PCIE_IN0_MEM_LIMIT = 32,
PCIE_IN1_MEM_LIMIT = 36,
PCIE_IN_IO_LIMIT = 40,
PCIE_IN_CFG0_LIMIT = 44,
PCIE_IN_CFG1_LIMIT = 48,
PCIE_IN_MSG_LIMIT = 52,
PCIE_AHB_SLAVE_CTRL = 56,
PCIE_SLAVE_BE_SHIFT = 22,
};
#define ADDR_VAL(val) ((val) & 0xFFFF)
#define DATA_VAL(val) ((val) & 0xFFFF)
#define PCIE_SLAVE_BE(val) ((val) << PCIE_SLAVE_BE_SHIFT)
#define PCIE_SLAVE_BE_MASK PCIE_SLAVE_BE(0xF)
struct oxnas_pcie_shared {
/* seems all access are serialized, no lock required */
int refcount;
};
/* Structure representing one PCIe interfaces */
struct oxnas_pcie {
void __iomem *cfgbase;
void __iomem *base;
void __iomem *inbound;
void __iomem *outbound;
void __iomem *pcie_ctrl;
int haslink;
struct platform_device *pdev;
struct resource io;
struct resource cfg;
struct resource pre_mem; /* prefetchable */
struct resource non_mem; /* non-prefetchable */
struct resource busn; /* max available bus numbers */
int card_reset; /* gpio pin, optional */
unsigned hcsl_en; /* hcsl pci enable bit */
struct clk *clk;
struct clk *busclk; /* for pcie bus, actually the PLLB */
void *private_data[1];
spinlock_t lock;
};
static struct oxnas_pcie_shared pcie_shared = {
.refcount = 0,
};
static inline struct oxnas_pcie *sys_to_pcie(struct pci_sys_data *sys)
{
return sys->private_data;
}
static inline void set_out_lanes(struct oxnas_pcie *pcie, unsigned lanes)
{
oxnas_register_value_mask(pcie->outbound + PCIE_AHB_SLAVE_CTRL,
PCIE_SLAVE_BE_MASK, PCIE_SLAVE_BE(lanes));
wmb();
}
static int oxnas_pcie_link_up(struct oxnas_pcie *pcie)
{
unsigned long end;
/* Poll for PCIE link up */
end = jiffies + (LINK_UP_TIMEOUT_SECONDS * HZ);
while (!time_after(jiffies, end)) {
if (readl(pcie->pcie_ctrl) & PCIE_LINK_UP)
return 1;
}
return 0;
}
static void __init oxnas_pcie_setup_hw(struct oxnas_pcie *pcie)
{
/* We won't have any inbound address translation. This allows PCI
* devices to access anywhere in the AHB address map. Might be regarded
* as a bit dangerous, but let's get things working before we worry
* about that
*/
oxnas_register_clear_mask(pcie->inbound + IB_ADDR_XLATE_ENABLE,
ENABLE_IN_ADDR_TRANS);
wmb();
/*
* Program outbound translation windows
*
* Outbound window is what is referred to as "PCI client" region in HRM
*
* Could use the larger alternative address space to get >>64M regions
* for graphics cards etc., but will not bother at this point.
*
* IP bug means that AMBA window size must be a power of 2
*
* Set mem0 window for first 16MB of outbound window non-prefetchable
* Set mem1 window for second 16MB of outbound window prefetchable
* Set io window for next 16MB of outbound window
* Set cfg0 for final 1MB of outbound window
*
* Ignore mem1, cfg1 and msg windows for now as no obvious use cases for
* 820 that would need them
*
* Probably ideally want no offset between mem0 window start as seen by
* ARM and as seen on PCI bus and get Linux to assign memory regions to
* PCI devices using the same "PCI client" region start address as seen
* by ARM
*/
/* Set PCIeA mem0 region to be 1st 16MB of the 64MB PCIeA window */
writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_IN0_MEM_ADDR);
writel_relaxed(pcie->non_mem.end, pcie->outbound + PCIE_IN0_MEM_LIMIT);
writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_POM0_MEM_ADDR);
/* Set PCIeA mem1 region to be 2nd 16MB of the 64MB PCIeA window */
writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_IN1_MEM_ADDR);
writel_relaxed(pcie->pre_mem.end, pcie->outbound + PCIE_IN1_MEM_LIMIT);
writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_POM1_MEM_ADDR);
/* Set PCIeA io to be third 16M region of the 64MB PCIeA window*/
writel_relaxed(pcie->io.start, pcie->outbound + PCIE_IN_IO_ADDR);
writel_relaxed(pcie->io.end, pcie->outbound + PCIE_IN_IO_LIMIT);
/* Set PCIeA cgf0 to be last 16M region of the 64MB PCIeA window*/
writel_relaxed(pcie->cfg.start, pcie->outbound + PCIE_IN_CFG0_ADDR);
writel_relaxed(pcie->cfg.end, pcie->outbound + PCIE_IN_CFG0_LIMIT);
wmb();
/* Enable outbound address translation */
oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_OBTRANS);
wmb();
/*
* Program PCIe command register for core to:
* enable memory space
* enable bus master
* enable io
*/
writel_relaxed(7, pcie->base + PCI_CONFIG_COMMAND_STATUS);
/* which is which */
wmb();
}
static unsigned oxnas_pcie_cfg_to_offset(
struct pci_sys_data *sys,
unsigned char bus_number,
unsigned int devfn,
int where)
{
unsigned int function = PCI_FUNC(devfn);
unsigned int slot = PCI_SLOT(devfn);
unsigned char bus_number_offset;
bus_number_offset = bus_number - sys->busnr;
/*
* We'll assume for now that the offset, function, slot, bus encoding
* should map onto linear, contiguous addresses in PCIe config space,
* albeit that the majority will be unused as only slot 0 is valid for
* any PCIe bus and most devices have only function 0
*
* Could be that PCIe in fact works by not encoding the slot number into
* the config space address as it's known that only slot 0 is valid.
* We'll have to experiment if/when we get a PCIe switch connected to
* the PCIe host
*/
return (bus_number_offset << 20) | (slot << 15) | (function << 12) |
(where & ~3);
}
/* PCI configuration space write function */
static int oxnas_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 val)
{
unsigned long flags;
struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
unsigned offset;
u32 value;
u32 lanes;
/* Only a single device per bus for PCIe point-to-point links */
if (PCI_SLOT(devfn) > 0)
return PCIBIOS_DEVICE_NOT_FOUND;
if (!pcie->haslink)
return PCIBIOS_DEVICE_NOT_FOUND;
offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
where);
value = val << (8 * (where & 3));
lanes = (0xf >> (4-size)) << (where & 3);
/* it race with mem and io write, but the possibility is low, normally
* all config writes happens at driver initialize stage, wont interleave
* with others.
* and many pcie cards use dword (4bytes) access mem/io access only,
* so not bother to copy that ugly work-around now. */
spin_lock_irqsave(&pcie->lock, flags);
set_out_lanes(pcie, lanes);
writel_relaxed(value, pcie->cfgbase + offset);
set_out_lanes(pcie, 0xf);
spin_unlock_irqrestore(&pcie->lock, flags);
return PCIBIOS_SUCCESSFUL;
}
/* PCI configuration space read function */
static int oxnas_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
int size, u32 *val)
{
struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
unsigned offset;
u32 value;
u32 left_bytes, right_bytes;
/* Only a single device per bus for PCIe point-to-point links */
if (PCI_SLOT(devfn) > 0) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
if (!pcie->haslink) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
where);
value = readl_relaxed(pcie->cfgbase + offset);
left_bytes = where & 3;
right_bytes = 4 - left_bytes - size;
value <<= right_bytes * 8;
value >>= (left_bytes + right_bytes) * 8;
*val = value;
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops oxnas_pcie_ops = {
.read = oxnas_pcie_rd_conf,
.write = oxnas_pcie_wr_conf,
};
static int __init oxnas_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct oxnas_pcie *pcie = sys_to_pcie(sys);
pci_add_resource_offset(&sys->resources, &pcie->non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pcie->pre_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pcie->io, sys->io_offset);
pci_add_resource(&sys->resources, &pcie->busn);
if (sys->busnr == 0) { /* default one */
sys->busnr = pcie->busn.start;
}
/* do not use devm_ioremap_resource, it does not like cfg resource */
pcie->cfgbase = devm_ioremap(&pcie->pdev->dev, pcie->cfg.start,
resource_size(&pcie->cfg));
if (!pcie->cfgbase)
return -ENOMEM;
oxnas_pcie_setup_hw(pcie);
return 1;
}
static void __init oxnas_pcie_enable(struct device *dev, struct oxnas_pcie *pcie)
{
struct hw_pci hw;
int i;
memset(&hw, 0, sizeof(hw));
for (i = 0; i < NUM_CONTROLLERS; i++)
pcie->private_data[i] = pcie;
hw.nr_controllers = NUM_CONTROLLERS;
/* I think use stack pointer is a bad idea though it is valid in this case */
hw.private_data = pcie->private_data;
hw.setup = oxnas_pcie_setup;
hw.map_irq = of_irq_parse_and_map_pci;
hw.ops = &oxnas_pcie_ops;
/* pass dev to maintain of tree, interrupt mapping rely on this */
pci_common_init_dev(dev, &hw);
}
void oxnas_pcie_init_shared_hw(struct platform_device *pdev,
void __iomem *phybase)
{
struct reset_control *rstc;
int ret;
/* generate clocks from HCSL buffers, shared parts */
writel(HCSL_BIAS_ON|HCSL_PCIE_EN, SYS_CTRL_HCSL_CTRL);
/* Ensure PCIe PHY is properly reset */
rstc = reset_control_get(&pdev->dev, "phy");
if (IS_ERR(rstc)) {
ret = PTR_ERR(rstc);
} else {
ret = reset_control_reset(rstc);
reset_control_put(rstc);
}
if (ret) {
dev_err(&pdev->dev, "phy reset failed %d\n", ret);
return;
}
/* Enable PCIe Pre-Emphasis: What these value means? */
writel(ADDR_VAL(0x0014), phybase + PHY_ADDR);
writel(DATA_VAL(0xce10) | CAP_DATA, phybase + PHY_DATA);
writel(DATA_VAL(0xce10) | WRITE_EN, phybase + PHY_DATA);
writel(ADDR_VAL(0x2004), phybase + PHY_ADDR);
writel(DATA_VAL(0x82c7) | CAP_DATA, phybase + PHY_DATA);
writel(DATA_VAL(0x82c7) | WRITE_EN, phybase + PHY_DATA);
}
static int oxnas_pcie_shared_init(struct platform_device *pdev)
{
if (++pcie_shared.refcount == 1) {
/* we are the first */
struct device_node *np = pdev->dev.of_node;
void __iomem *phy = of_iomap(np, 2);
if (!phy) {
--pcie_shared.refcount;
return -ENOMEM;
}
oxnas_pcie_init_shared_hw(pdev, phy);
iounmap(phy);
return 0;
} else {
return 0;
}
}
#if 0
/* maybe we will call it when enter low power state */
static void oxnas_pcie_shared_deinit(struct platform_device *pdev)
{
if (--pcie_shared.refcount == 0) {
/* no cleanup needed */;
}
}
#endif
static int __init
oxnas_pcie_map_registers(struct platform_device *pdev,
struct device_node *np,
struct oxnas_pcie *pcie)
{
struct resource regs;
int ret = 0;
u32 outbound_ctrl_offset;
u32 pcie_ctrl_offset;
/* 2 is reserved for shared phy */
ret = of_address_to_resource(np, 0, &regs);
if (ret)
return -EINVAL;
pcie->base = devm_ioremap_resource(&pdev->dev, &regs);
if (!pcie->base)
return -ENOMEM;
ret = of_address_to_resource(np, 1, &regs);
if (ret)
return -EINVAL;
pcie->inbound = devm_ioremap_resource(&pdev->dev, &regs);
if (!pcie->inbound)
return -ENOMEM;
if (of_property_read_u32(np, "plxtech,pcie-outbound-offset",
&outbound_ctrl_offset))
return -EINVAL;
/* SYSCRTL is shared by too many drivers, so is mapped by board file */
pcie->outbound = IOMEM(OXNAS_SYSCRTL_BASE_VA + outbound_ctrl_offset);
if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset",
&pcie_ctrl_offset))
return -EINVAL;
pcie->pcie_ctrl = IOMEM(OXNAS_SYSCRTL_BASE_VA + pcie_ctrl_offset);
return 0;
}
static int __init oxnas_pcie_init_res(struct platform_device *pdev,
struct oxnas_pcie *pcie,
struct device_node *np)
{
struct of_pci_range range;
struct of_pci_range_parser parser;
int ret;
if (of_pci_range_parser_init(&parser, np))
return -EINVAL;
/* Get the I/O and memory ranges from DT */
for_each_of_pci_range(&parser, &range) {
unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
if (restype == IORESOURCE_IO) {
of_pci_range_to_resource(&range, np, &pcie->io);
pcie->io.name = "I/O";
}
if (restype == IORESOURCE_MEM) {
if (range.flags & IORESOURCE_PREFETCH) {
of_pci_range_to_resource(&range, np, &pcie->pre_mem);
pcie->pre_mem.name = "PRE MEM";
} else {
of_pci_range_to_resource(&range, np, &pcie->non_mem);
pcie->non_mem.name = "NON MEM";
}
}
if (restype == 0)
of_pci_range_to_resource(&range, np, &pcie->cfg);
}
/* Get the bus range */
ret = of_pci_parse_bus_range(np, &pcie->busn);
if (ret) {
dev_err(&pdev->dev, "failed to parse bus-range property: %d\n",
ret);
return ret;
}
pcie->card_reset = of_get_gpio(np, 0);
if (pcie->card_reset < 0)
dev_info(&pdev->dev, "card reset gpio pin not exists\n");
if (of_property_read_u32(np, "plxtech,pcie-hcsl-bit", &pcie->hcsl_en))
return -EINVAL;
pcie->clk = of_clk_get_by_name(np, "pcie");
if (IS_ERR(pcie->clk)) {
return PTR_ERR(pcie->clk);
}
pcie->busclk = of_clk_get_by_name(np, "busclk");
if (IS_ERR(pcie->busclk)) {
clk_put(pcie->clk);
return PTR_ERR(pcie->busclk);
}
return 0;
}
static void oxnas_pcie_init_hw(struct platform_device *pdev,
struct oxnas_pcie *pcie)
{
u32 version_id;
int ret;
clk_prepare_enable(pcie->busclk);
/* reset PCIe cards use hard-wired gpio pin */
if (pcie->card_reset >= 0 &&
!gpio_direction_output(pcie->card_reset, 0)) {
wmb();
mdelay(10);
/* must tri-state the pin to pull it up */
gpio_direction_input(pcie->card_reset);
wmb();
mdelay(100);
}
oxnas_register_set_mask(SYS_CTRL_HCSL_CTRL, BIT(pcie->hcsl_en));
/* core */
ret = device_reset(&pdev->dev);
if (ret) {
dev_err(&pdev->dev, "core reset failed %d\n", ret);
return;
}
/* Start PCIe core clocks */
clk_prepare_enable(pcie->clk);
version_id = readl_relaxed(pcie->base + PCI_CONFIG_VERSION_DEVICEID);
dev_info(&pdev->dev, "PCIe version/deviceID 0x%x\n", version_id);
if (version_id != VERSION_ID_MAGIC) {
dev_info(&pdev->dev, "PCIe controller not found\n");
pcie->haslink = 0;
return;
}
/* allow entry to L23 state */
oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_READY_ENTR_L23);
/* Set PCIe core into RootCore mode */
oxnas_register_value_mask(pcie->pcie_ctrl, PCIE_DEVICE_TYPE_MASK,
PCIE_DEVICE_TYPE_ROOT);
wmb();
/* Bring up the PCI core */
oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_LTSSM);
wmb();
}
static int __init oxnas_pcie_probe(struct platform_device *pdev)
{
struct oxnas_pcie *pcie;
struct device_node *np = pdev->dev.of_node;
int ret;
pcie = devm_kzalloc(&pdev->dev, sizeof(struct oxnas_pcie),
GFP_KERNEL);
if (!pcie)
return -ENOMEM;
pcie->pdev = pdev;
pcie->haslink = 1;
spin_lock_init(&pcie->lock);
ret = oxnas_pcie_init_res(pdev, pcie, np);
if (ret)
return ret;
if (pcie->card_reset >= 0) {
ret = gpio_request_one(pcie->card_reset, GPIOF_DIR_IN,
dev_name(&pdev->dev));
if (ret) {
dev_err(&pdev->dev, "cannot request gpio pin %d\n",
pcie->card_reset);
return ret;
}
}
ret = oxnas_pcie_map_registers(pdev, np, pcie);
if (ret) {
dev_err(&pdev->dev, "cannot map registers\n");
goto err_free_gpio;
}
ret = oxnas_pcie_shared_init(pdev);
if (ret)
goto err_free_gpio;
/* if hw not found, haslink cleared */
oxnas_pcie_init_hw(pdev, pcie);
if (pcie->haslink && oxnas_pcie_link_up(pcie)) {
pcie->haslink = 1;
dev_info(&pdev->dev, "link up\n");
} else {
pcie->haslink = 0;
dev_info(&pdev->dev, "link down\n");
}
/* should we register our controller even when pcie->haslink is 0 ? */
/* register the controller with framework */
oxnas_pcie_enable(&pdev->dev, pcie);
return 0;
err_free_gpio:
if (pcie->card_reset)
gpio_free(pcie->card_reset);
return ret;
}
static const struct of_device_id oxnas_pcie_of_match_table[] = {
{ .compatible = "plxtech,nas782x-pcie", },
{},
};
MODULE_DEVICE_TABLE(of, oxnas_pcie_of_match_table);
static struct platform_driver oxnas_pcie_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "oxnas-pcie",
.of_match_table =
of_match_ptr(oxnas_pcie_of_match_table),
},
};
static int __init oxnas_pcie_init(void)
{
return platform_driver_probe(&oxnas_pcie_driver,
oxnas_pcie_probe);
}
subsys_initcall(oxnas_pcie_init);
MODULE_AUTHOR("Ma Haijun <mahaijuns@gmail.com>");
MODULE_DESCRIPTION("NAS782x PCIe driver");
MODULE_LICENSE("GPLv2");

File diff suppressed because it is too large Load diff

View file

@ -1,107 +0,0 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <mach/hardware.h>
static int ox820_reset_reset(struct reset_controller_dev *rcdev,
unsigned long id)
{
writel(BIT(id), SYS_CTRL_RST_SET_CTRL);
writel(BIT(id), SYS_CTRL_RST_CLR_CTRL);
return 0;
}
static int ox820_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
writel(BIT(id), SYS_CTRL_RST_SET_CTRL);
return 0;
}
static int ox820_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
writel(BIT(id), SYS_CTRL_RST_CLR_CTRL);
return 0;
}
static struct reset_control_ops ox820_reset_ops = {
.reset = ox820_reset_reset,
.assert = ox820_reset_assert,
.deassert = ox820_reset_deassert,
};
static const struct of_device_id ox820_reset_dt_ids[] = {
{ .compatible = "plxtech,nas782x-reset", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, ox820_reset_dt_ids);
struct reset_controller_dev rcdev;
static int ox820_reset_probe(struct platform_device *pdev)
{
struct reset_controller_dev *rcdev;
rcdev = devm_kzalloc(&pdev->dev, sizeof(*rcdev), GFP_KERNEL);
if (!rcdev)
return -ENOMEM;
/* note: reset controller is statically mapped */
rcdev->owner = THIS_MODULE;
rcdev->nr_resets = 32;
rcdev->ops = &ox820_reset_ops;
rcdev->of_node = pdev->dev.of_node;
reset_controller_register(rcdev);
platform_set_drvdata(pdev, rcdev);
return 0;
}
static int ox820_reset_remove(struct platform_device *pdev)
{
struct reset_controller_dev *rcdev = platform_get_drvdata(pdev);
reset_controller_unregister(rcdev);
return 0;
}
static struct platform_driver ox820_reset_driver = {
.probe = ox820_reset_probe,
.remove = ox820_reset_remove,
.driver = {
.name = "ox820-reset",
.owner = THIS_MODULE,
.of_match_table = ox820_reset_dt_ids,
},
};
static int __init ox820_reset_init(void)
{
return platform_driver_probe(&ox820_reset_driver,
ox820_reset_probe);
}
/*
* reset controller does not support probe deferral, so it has to be
* initialized before any user, in particular, PCIE uses subsys_initcall.
*/
arch_initcall(ox820_reset_init);
MODULE_AUTHOR("Ma Haijun");
MODULE_LICENSE("GPL");

View file

@ -1,316 +0,0 @@
/*
* drivers/usb/host/ehci-oxnas.c
*
* Tzachi Perelstein <tzachi@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/reset.h>
#include <mach/hardware.h>
#include <mach/utils.h>
#include "ehci.h"
struct oxnas_hcd {
struct clk *clk;
struct clk *refsrc;
struct clk *phyref;
int use_pllb;
int use_phya;
struct reset_control *rst_host;
struct reset_control *rst_phya;
struct reset_control *rst_phyb;
};
#define DRIVER_DESC "Oxnas On-Chip EHCI Host Controller"
static struct hc_driver __read_mostly oxnas_hc_driver;
static void start_oxnas_usb_ehci(struct oxnas_hcd *oxnas)
{
u32 reg;
if (oxnas->use_pllb) {
/* enable pllb */
clk_prepare_enable(oxnas->refsrc);
/* enable ref600 */
clk_prepare_enable(oxnas->phyref);
/* 600MHz pllb divider for 12MHz */
writel(PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0),
SEC_CTRL_PLLB_DIV_CTRL);
} else {
/* ref 300 divider for 12MHz */
writel(REF300_DIV_INT(25) | REF300_DIV_FRAC(0),
SYS_CTRL_REF300_DIV);
}
/* Ensure the USB block is properly reset */
reset_control_reset(oxnas->rst_host);
reset_control_reset(oxnas->rst_phya);
reset_control_reset(oxnas->rst_phyb);
/* Force the high speed clock to be generated all the time, via serial
programming of the USB HS PHY */
writel((2UL << USBHSPHY_TEST_ADD) |
(0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
writel((1UL << USBHSPHY_TEST_CLK) |
(2UL << USBHSPHY_TEST_ADD) |
(0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
writel((0xfUL << USBHSPHY_TEST_ADD) |
(0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
writel((1UL << USBHSPHY_TEST_CLK) |
(0xfUL << USBHSPHY_TEST_ADD) |
(0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
if (oxnas->use_pllb) /* use pllb clock */
writel(USB_CLK_INTERNAL | USB_INT_CLK_PLLB, SYS_CTRL_USB_CTRL);
else /* use ref300 derived clock */
writel(USB_CLK_INTERNAL | USB_INT_CLK_REF300,
SYS_CTRL_USB_CTRL);
if (oxnas->use_phya) {
/* Configure USB PHYA as a host */
reg = readl(SYS_CTRL_USB_CTRL);
reg &= ~USBAMUX_DEVICE;
writel(reg, SYS_CTRL_USB_CTRL);
}
/* Enable the clock to the USB block */
clk_prepare_enable(oxnas->clk);
}
static void stop_oxnas_usb_ehci(struct oxnas_hcd *oxnas)
{
reset_control_assert(oxnas->rst_host);
reset_control_assert(oxnas->rst_phya);
reset_control_assert(oxnas->rst_phyb);
if (oxnas->use_pllb) {
clk_disable_unprepare(oxnas->phyref);
clk_disable_unprepare(oxnas->refsrc);
}
clk_disable_unprepare(oxnas->clk);
}
static int ehci_oxnas_reset(struct usb_hcd *hcd)
{
#define txttfill_tuning reserved2[0]
struct ehci_hcd *ehci;
u32 tmp;
int retval = ehci_setup(hcd);
if (retval)
return retval;
ehci = hcd_to_ehci(hcd);
tmp = ehci_readl(ehci, &ehci->regs->txfill_tuning);
tmp &= ~0x00ff0000;
tmp |= 0x003f0000; /* set burst pre load count to 0x40 (63 * 4 bytes) */
tmp |= 0x16; /* set sheduler overhead to 22 * 1.267us (HS) or 22 * 6.33us (FS/LS)*/
ehci_writel(ehci, tmp, &ehci->regs->txfill_tuning);
tmp = ehci_readl(ehci, &ehci->regs->txttfill_tuning);
tmp |= 0x2; /* set sheduler overhead to 2 * 6.333us */
ehci_writel(ehci, tmp, &ehci->regs->txttfill_tuning);
return retval;
}
static int ehci_oxnas_drv_probe(struct platform_device *ofdev)
{
struct device_node *np = ofdev->dev.of_node;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
struct resource res;
struct oxnas_hcd *oxnas;
int irq, err;
struct reset_control *rstc;
if (usb_disabled())
return -ENODEV;
if (!ofdev->dev.dma_mask)
ofdev->dev.dma_mask = &ofdev->dev.coherent_dma_mask;
if (!ofdev->dev.coherent_dma_mask)
ofdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&oxnas_hc_driver, &ofdev->dev,
dev_name(&ofdev->dev));
if (!hcd)
return -ENOMEM;
err = of_address_to_resource(np, 0, &res);
if (err)
goto err_res;
hcd->rsrc_start = res.start;
hcd->rsrc_len = resource_size(&res);
hcd->regs = devm_ioremap_resource(&ofdev->dev, &res);
if (IS_ERR(hcd->regs)) {
dev_err(&ofdev->dev, "devm_ioremap_resource failed\n");
err = PTR_ERR(hcd->regs);
goto err_ioremap;
}
oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv;
oxnas->use_pllb = of_property_read_bool(np, "plxtech,ehci_use_pllb");
oxnas->use_phya = of_property_read_bool(np, "plxtech,ehci_use_phya");
oxnas->clk = of_clk_get_by_name(np, "usb");
if (IS_ERR(oxnas->clk)) {
err = PTR_ERR(oxnas->clk);
goto err_clk;
}
if (oxnas->use_pllb) {
oxnas->refsrc = of_clk_get_by_name(np, "refsrc");
if (IS_ERR(oxnas->refsrc)) {
err = PTR_ERR(oxnas->refsrc);
goto err_refsrc;
}
oxnas->phyref = of_clk_get_by_name(np, "phyref");
if (IS_ERR(oxnas->refsrc)) {
err = PTR_ERR(oxnas->refsrc);
goto err_phyref;
}
} else {
oxnas->refsrc = NULL;
oxnas->phyref = NULL;
}
rstc = devm_reset_control_get(&ofdev->dev, "host");
if (IS_ERR(rstc)) {
err = PTR_ERR(rstc);
goto err_rst;
}
oxnas->rst_host = rstc;
rstc = devm_reset_control_get(&ofdev->dev, "phya");
if (IS_ERR(rstc)) {
err = PTR_ERR(rstc);
goto err_rst;
}
oxnas->rst_phya = rstc;
rstc = devm_reset_control_get(&ofdev->dev, "phyb");
if (IS_ERR(rstc)) {
err = PTR_ERR(rstc);
goto err_rst;
}
oxnas->rst_phyb = rstc;
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n");
err = -EBUSY;
goto err_irq;
}
hcd->has_tt = 1;
ehci = hcd_to_ehci(hcd);
ehci->caps = hcd->regs;
start_oxnas_usb_ehci(oxnas);
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err)
goto err_hcd;
return 0;
err_hcd:
stop_oxnas_usb_ehci(oxnas);
err_irq:
err_rst:
if (oxnas->phyref)
clk_put(oxnas->phyref);
err_phyref:
if (oxnas->refsrc)
clk_put(oxnas->refsrc);
err_refsrc:
clk_put(oxnas->clk);
err_clk:
err_ioremap:
err_res:
usb_put_hcd(hcd);
return err;
}
static int ehci_oxnas_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct oxnas_hcd *oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv;
usb_remove_hcd(hcd);
if (oxnas->use_pllb) {
clk_disable_unprepare(oxnas->phyref);
clk_put(oxnas->phyref);
clk_disable_unprepare(oxnas->refsrc);
clk_put(oxnas->refsrc);
}
clk_disable_unprepare(oxnas->clk);
usb_put_hcd(hcd);
return 0;
}
static const struct of_device_id oxnas_ehci_dt_ids[] = {
{ .compatible = "plxtech,nas782x-ehci" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, oxnas_ehci_dt_ids);
static struct platform_driver ehci_oxnas_driver = {
.probe = ehci_oxnas_drv_probe,
.remove = ehci_oxnas_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver.name = "oxnas-ehci",
.driver.of_match_table = oxnas_ehci_dt_ids,
};
static const struct ehci_driver_overrides oxnas_overrides __initconst = {
.reset = ehci_oxnas_reset,
.extra_priv_size = sizeof(struct oxnas_hcd),
};
static int __init ehci_oxnas_init(void)
{
if (usb_disabled())
return -ENODEV;
ehci_init_driver(&oxnas_hc_driver, &oxnas_overrides);
return platform_driver_register(&ehci_oxnas_driver);
}
module_init(ehci_oxnas_init);
static void __exit ehci_oxnas_cleanup(void)
{
platform_driver_unregister(&ehci_oxnas_driver);
}
module_exit(ehci_oxnas_cleanup);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_ALIAS("platform:oxnas-ehci");
MODULE_LICENSE("GPL");

View file

@ -1,107 +0,0 @@
#
# Copyright (C) 2013-2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
UBIFS_OPTS = -m 2048 -e 126KiB -c 4096
DEVICE_VARS += DTS UBIFS_OPTS
KERNEL_LOADADDR := 0x60008000
define Build/ubootable
(dd if="$(STAGING_DIR_IMAGE)/u-boot.bin" bs=128k conv=sync; \
dd if="$@" bs=128k conv=sync ) >> $@.new
@mv "$@.new" "$@"
endef
define Device/Default
KERNEL_DEPENDS = $$(wildcard $$(DTS_DIR)/ox820-$$(DTS).dts)
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/ox820-$$(DTS).dtb
KERNEL_NAME := zImage
KERNEL_SUFFIX := -uImage
KERNEL_INSTALL := 1
KERNEL_INITRAMFS = kernel-bin | lzma | fit lzma $$(DTS_DIR)/ox820-$$(DTS).dtb | ubootable
KERNEL_INITRAMFS_PREFIX = $$(IMAGE_PREFIX)-u-boot-initramfs
KERNEL_INITRAMFS_SUFFIX := .bin
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
FILESYSTEMS := squashfs ubifs
PROFILES = Default $$(DTS)
IMAGES := ubinized.bin sysupgrade.tar
IMAGE/ubinized.bin := append-ubi
IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
endef
define Device/akitio
DTS := akitio
DEVICE_TITLE := Akitio MyCloud mini / Silverstone DC01
DEVICE_PACKAGES := kmod-i2c-gpio kmod-rtc-ds1307
endef
TARGET_DEVICES += akitio
define Build/omninas-factory
rm -rf $@.tmp $@.dummy $@.dummy.gz
mkdir -p $@.tmp
$(CP) $@ $@.tmp/uImage
dd if=/dev/zero bs=64k count=4 of=$@.dummy
gzip $@.dummy
mkimage -A arm -T ramdisk -C gzip -n "dummy" \
-d $@.dummy.gz \
$@.tmp/rdimg.gz
echo 2.35.20140102 > $@.tmp/version ; echo >> $@.tmp/version
chmod 0744 $@.tmp/*
$(TAR) -C $@.tmp -czvf $@ \
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") .
endef
define Build/encrypt-3des
openssl enc -des3 -a -k $(1) -in $@ -out $@.new && mv $@.new $@
endef
define Device/kd20
DEVICE_DTS := ox820-kd20
DEVICE_TITLE := Shuttle KD20
KERNEL := kernel-bin | append-dtb | uImage none
KERNEL_INITRAMFS_PREFIX = $$(IMAGE_PREFIX)-factory
KERNEL_INITRAMFS_SUFFIX := .tar.gz
KERNEL_INITRAMFS = kernel-bin | append-dtb | uImage none | omninas-factory | encrypt-3des sohmuntitnlaes
KERNEL_IMAGE := zImage
DEVICE_PACKAGES := kmod-usb3 kmod-i2c-gpio kmod-rtc-pcf8563 kmod-gpio-beeper \
kmod-hwmon-core kmod-hwmon-gpiofan \
kmod-md-mod kmod-md-raid0 kmod-md-raid1 kmod-fs-ext4 kmod-fs-xfs
KERNEL_IN_UBI :=
UBOOTENV_IN_UBI :=
endef
TARGET_DEVICES += kd20
define Device/pogoplug-pro
DTS := pogoplug-pro
DEVICE_TITLE := Cloud Engines Pogoplug Pro (with mPCIe)
endef
TARGET_DEVICES += pogoplug-pro
define Device/pogoplug-v3
DTS := pogoplug-v3
DEVICE_TITLE := Cloud Engines Pogoplug V3 (no mPCIe)
endef
TARGET_DEVICES += pogoplug-v3
define Device/stg212
DTS := stg212
DEVICE_TITLE := MitraStar STG-212
endef
TARGET_DEVICES += stg212
VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
$(eval $(call BuildImage))

View file

@ -1,41 +0,0 @@
#
# Copyright (C) 2006-2014 OpenWrt.org
# Copyright (C) 2016 LEDE project
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define KernelPackage/ata-oxnas-sata
SUBMENU:=$(BLOCK_MENU)
TITLE:=oxnas Serial ATA support
KCONFIG:=CONFIG_SATA_OXNAS
DEPENDS:=@TARGET_oxnas
FILES:=$(LINUX_DIR)/drivers/ata/sata_oxnas.ko
AUTOLOAD:=$(call AutoLoad,41,sata_oxnas,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-oxnas-sata/description
SATA support for OX934 core found in the OX82x/PLX782x SoCs
endef
$(eval $(call KernelPackage,ata-oxnas-sata))
define KernelPackage/usb2-oxnas
SUBMENU:=$(BLOCK_MENU)
TITLE:=OXNAS USB controller driver
DEPENDS:=@TARGET_oxnas +kmod-usb2
KCONFIG:=CONFIG_USB_EHCI_OXNAS
FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-oxnas.ko
AUTOLOAD:=$(call AutoLoad,55,ehci-oxnas,1)
$(call AddDepends/usb)
endef
define KernelPackage/usb2-oxnas/description
This driver provides USB Device Controller support for the
EHCI USB host built-in to the PLXTECH NAS782x SoC
endef
$(eval $(call KernelPackage,usb2-oxnas))

View file

@ -1,91 +0,0 @@
From 410a91f6efa1c4c3c4369d1dd2c31286749dff33 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 23 Mar 2016 11:19:01 +0100
Subject: [PATCH 073/102] of: mtd: prepare helper reading NAND ECC algo from
DT
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
NAND subsystem is being slightly reworked to store ECC details in
separated fields. In future we'll want to add support for more DT
properties as specifying every possible setup with a single
"nand-ecc-mode" is a pretty bad idea.
To allow this let's add a helper that will support something like
"nand-ecc-algo" in future. Right now we use it for keeping backward
compatibility.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/of/of_mtd.c | 36 ++++++++++++++++++++++++++++++++++++
include/linux/of_mtd.h | 6 ++++++
2 files changed, 42 insertions(+)
--- a/drivers/of/of_mtd.c
+++ b/drivers/of/of_mtd.c
@@ -50,6 +50,42 @@ int of_get_nand_ecc_mode(struct device_n
EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode);
/**
+ * of_get_nand_ecc_algo - Get nand ecc algorithm for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets ecc algorithm and returns its enum value, or errno in error
+ * case.
+ */
+int of_get_nand_ecc_algo(struct device_node *np)
+{
+ const char *pm;
+ int err;
+
+ /*
+ * TODO: Read ECC algo OF property and map it to enum nand_ecc_algo.
+ * It's not implemented yet as currently NAND subsystem ignores
+ * algorithm explicitly set this way. Once it's handled we should
+ * document & support new property.
+ */
+
+ /*
+ * For backward compatibility we also read "nand-ecc-mode" checking
+ * for some obsoleted values that were specifying ECC algorithm.
+ */
+ err = of_property_read_string(np, "nand-ecc-mode", &pm);
+ if (err < 0)
+ return err;
+
+ if (!strcasecmp(pm, "soft"))
+ return NAND_ECC_HAMMING;
+ else if (!strcasecmp(pm, "soft_bch"))
+ return NAND_ECC_BCH;
+
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(of_get_nand_ecc_algo);
+
+/**
* of_get_nand_ecc_step_size - Get ECC step size associated to
* the required ECC strength (see below).
* @np: Pointer to the given device_node
--- a/include/linux/of_mtd.h
+++ b/include/linux/of_mtd.h
@@ -13,6 +13,7 @@
#include <linux/of.h>
int of_get_nand_ecc_mode(struct device_node *np);
+int of_get_nand_ecc_algo(struct device_node *np);
int of_get_nand_ecc_step_size(struct device_node *np);
int of_get_nand_ecc_strength(struct device_node *np);
int of_get_nand_bus_width(struct device_node *np);
@@ -24,6 +25,11 @@ static inline int of_get_nand_ecc_mode(s
{
return -ENOSYS;
}
+
+static inline int of_get_nand_ecc_algo(struct device_node *np)
+{
+ return -ENOSYS;
+}
static inline int of_get_nand_ecc_step_size(struct device_node *np)
{

View file

@ -1,175 +0,0 @@
From d45bc58dd3bdcaabc1d7d8d9b0b8dee826635cc6 Mon Sep 17 00:00:00 2001
From: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Date: Wed, 27 Jul 2016 11:23:52 +0200
Subject: [PATCH] mtd: nand: import nand_hw_control_init()
The code to initialize a struct nand_hw_control is duplicated across
several drivers. Factorize it using an inline function.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/bf5xx_nand.c | 3 +--
drivers/mtd/nand/brcmnand/brcmnand.c | 3 +--
drivers/mtd/nand/docg4.c | 3 +--
drivers/mtd/nand/fsl_elbc_nand.c | 3 +--
drivers/mtd/nand/fsl_ifc_nand.c | 3 +--
drivers/mtd/nand/jz4780_nand.c | 3 +--
drivers/mtd/nand/nand_base.c | 3 +--
drivers/mtd/nand/ndfc.c | 3 +--
drivers/mtd/nand/pxa3xx_nand.c | 3 +--
drivers/mtd/nand/qcom_nandc.c | 3 +--
drivers/mtd/nand/s3c2410.c | 3 +--
drivers/mtd/nand/sunxi_nand.c | 3 +--
drivers/mtd/nand/txx9ndfmc.c | 3 +--
include/linux/mtd/nand.h | 7 +++++++
14 files changed, 20 insertions(+), 26 deletions(-)
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -748,8 +748,7 @@ static int bf5xx_nand_probe(struct platf
platform_set_drvdata(pdev, info);
- spin_lock_init(&info->controller.lock);
- init_waitqueue_head(&info->controller.wq);
+ nand_hw_control_init(&info->controller);
info->device = &pdev->dev;
info->platform = plat;
--- a/drivers/mtd/nand/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
@@ -2149,8 +2149,7 @@ int brcmnand_probe(struct platform_devic
init_completion(&ctrl->done);
init_completion(&ctrl->dma_done);
- spin_lock_init(&ctrl->controller.lock);
- init_waitqueue_head(&ctrl->controller.wq);
+ nand_hw_control_init(&ctrl->controller);
INIT_LIST_HEAD(&ctrl->host_list);
/* NAND register range */
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -1227,8 +1227,7 @@ static void __init init_mtd_structs(stru
nand->options = NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE;
nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA;
nand->controller = &nand->hwcontrol;
- spin_lock_init(&nand->controller->lock);
- init_waitqueue_head(&nand->controller->wq);
+ nand_hw_control_init(nand->controller);
/* methods */
nand->cmdfunc = docg4_command;
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -866,8 +866,7 @@ static int fsl_elbc_nand_probe(struct pl
}
elbc_fcm_ctrl->counter++;
- spin_lock_init(&elbc_fcm_ctrl->controller.lock);
- init_waitqueue_head(&elbc_fcm_ctrl->controller.wq);
+ nand_hw_control_init(&elbc_fcm_ctrl->controller);
fsl_lbc_ctrl_dev->nand = elbc_fcm_ctrl;
} else {
elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -1073,8 +1073,7 @@ static int fsl_ifc_nand_probe(struct pla
ifc_nand_ctrl->addr = NULL;
fsl_ifc_ctrl_dev->nand = ifc_nand_ctrl;
- spin_lock_init(&ifc_nand_ctrl->controller.lock);
- init_waitqueue_head(&ifc_nand_ctrl->controller.wq);
+ nand_hw_control_init(&ifc_nand_ctrl->controller);
} else {
ifc_nand_ctrl = fsl_ifc_ctrl_dev->nand;
}
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3208,8 +3208,7 @@ static void nand_set_defaults(struct nan
if (!chip->controller) {
chip->controller = &chip->hwcontrol;
- spin_lock_init(&chip->controller->lock);
- init_waitqueue_head(&chip->controller->wq);
+ nand_hw_control_init(chip->controller);
}
}
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -220,8 +220,7 @@ static int ndfc_probe(struct platform_de
ndfc = &ndfc_ctrl[cs];
ndfc->chip_select = cs;
- spin_lock_init(&ndfc->ndfc_control.lock);
- init_waitqueue_head(&ndfc->ndfc_control.wq);
+ nand_hw_control_init(&ndfc->ndfc_control);
ndfc->ofdev = ofdev;
dev_set_drvdata(&ofdev->dev, ndfc);
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1739,8 +1739,7 @@ static int alloc_nand_resource(struct pl
chip->cmdfunc = nand_cmdfunc;
}
- spin_lock_init(&chip->controller->lock);
- init_waitqueue_head(&chip->controller->wq);
+ nand_hw_control_init(chip->controller);
info->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(info->clk)) {
dev_err(&pdev->dev, "failed to get nand clock\n");
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -955,8 +955,7 @@ static int s3c24xx_nand_probe(struct pla
platform_set_drvdata(pdev, info);
- spin_lock_init(&info->controller.lock);
- init_waitqueue_head(&info->controller.wq);
+ nand_hw_control_init(&info->controller);
/* get the clock source and enable it */
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -1432,8 +1432,7 @@ static int sunxi_nfc_probe(struct platfo
return -ENOMEM;
nfc->dev = dev;
- spin_lock_init(&nfc->controller.lock);
- init_waitqueue_head(&nfc->controller.wq);
+ nand_hw_control_init(&nfc->controller);
INIT_LIST_HEAD(&nfc->chips);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -304,8 +304,7 @@ static int __init txx9ndfmc_probe(struct
dev_info(&dev->dev, "CLK:%ldMHz HOLD:%d SPW:%d\n",
(gbusclk + 500000) / 1000000, hold, spw);
- spin_lock_init(&drvdata->hw_control.lock);
- init_waitqueue_head(&drvdata->hw_control.wq);
+ nand_hw_control_init(&drvdata->hw_control);
platform_set_drvdata(dev, drvdata);
txx9ndfmc_initialize(dev);
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -461,6 +461,13 @@ struct nand_hw_control {
wait_queue_head_t wq;
};
+static inline void nand_hw_control_init(struct nand_hw_control *nfc)
+{
+ nfc->active = NULL;
+ spin_lock_init(&nfc->lock);
+ init_waitqueue_head(&nfc->wq);
+}
+
/**
* struct nand_ecc_ctrl - Control structure for ECC
* @mode: ECC mode

View file

@ -1,80 +0,0 @@
--- a/arch/arm/include/asm/glue-cache.h
+++ b/arch/arm/include/asm/glue-cache.h
@@ -156,9 +156,15 @@ static inline void nop_dma_unmap_area(co
#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range)
#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range)
#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range)
-#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
-#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
+# define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
+# define dmac_flush_range __glue(_CACHE,_dma_flush_range)
+#else
+# define __cpuc_flush_dcache_area __glue(fiq,_flush_kern_dcache_area)
+# define dmac_flush_range __glue(fiq,_dma_flush_range)
+#endif
+
#endif
#endif
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -866,6 +866,17 @@ config DMA_CACHE_RWFO
in hardware, other workarounds are needed (e.g. cache
maintenance broadcasting in software via FIQ).
+config DMA_CACHE_FIQ_BROADCAST
+ bool "Enable fiq broadcast DMA cache maintenance"
+ depends on CPU_V6K && SMP
+ select FIQ
+ help
+ The Snoop Control Unit on ARM11MPCore does not detect the
+ cache maintenance operations and the dma_{map,unmap}_area()
+ functions may leave stale cache entries on other CPUs. By
+ enabling this option, fiq broadcast in the ARMv6
+ DMA cache maintenance functions is performed.
+
config OUTER_CACHE
bool
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -319,6 +319,7 @@ void __sync_icache_dcache(pte_t pteval)
void flush_dcache_page(struct page *page)
{
struct address_space *mapping;
+ bool skip_broadcast = true;
/*
* The zero page is never written to, so never has any dirty
@@ -329,7 +330,10 @@ void flush_dcache_page(struct page *page
mapping = page_mapping(page);
- if (!cache_ops_need_broadcast() &&
+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
+ skip_broadcast = !cache_ops_need_broadcast();
+#endif
+ if (skip_broadcast &&
mapping && !page_mapped(page))
clear_bit(PG_dcache_clean, &page->flags);
else {
--- a/arch/arm/mm/dma.h
+++ b/arch/arm/mm/dma.h
@@ -4,8 +4,13 @@
#include <asm/glue-cache.h>
#ifndef MULTI_CACHE
-#define dmac_map_area __glue(_CACHE,_dma_map_area)
-#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
+# define dmac_map_area __glue(_CACHE,_dma_map_area)
+# define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
+#else
+# define dmac_map_area __glue(fiq,_dma_map_area)
+# define dmac_unmap_area __glue(fiq,_dma_unmap_area)
+#endif
/*
* These are private to the dma-mapping API. Do not use directly.

View file

@ -1,10 +0,0 @@
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -175,6 +175,7 @@ picochip Picochip Ltd
plathome Plat'Home Co., Ltd.
plda PLDA
pixcir PIXCIR MICROELECTRONICS Co., Ltd
+plxtech PLX Technology, Inc.
pulsedlight PulsedLight, Inc
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.

View file

@ -1,71 +0,0 @@
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -603,6 +603,19 @@ config ARCH_LPC32XX
help
Support for the NXP LPC32XX family of processors
+config ARCH_OXNAS
+ bool "Oxford Semiconductor 815/820/825 NAS SoC"
+ select ARM_GIC
+ select ARCH_REQUIRE_GPIOLIB
+ select CLKDEV_LOOKUP
+ select GENERIC_CLOCKEVENTS
+ select COMMON_CLK
+ select MIGHT_HAVE_PCI
+ select ARCH_HAS_RESET_CONTROLLER
+ help
+ This enables support for Oxford 815/820/825 NAS SoC
+ later renamed to PLXTECH NAS782x.
+
config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
@@ -883,6 +896,8 @@ source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
+source "arch/arm/mach-oxnas/Kconfig"
+
source "arch/arm/mach-picoxcell/Kconfig"
source "arch/arm/mach-pxa/Kconfig"
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -200,6 +200,7 @@ machine-$(CONFIG_ARCH_NSPIRE) += nspire
machine-$(CONFIG_ARCH_OMAP1) += omap1
machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
+machine-$(CONFIG_ARCH_OXNAS) += oxnas
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_QCOM) += qcom
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -497,6 +497,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-lswsgl.dtb \
orion5x-maxtor-shared-storage-2.dtb \
orion5x-rd88f5182-nas.dtb
+dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -228,6 +228,7 @@ edb9302a MACH_EDB9302A EDB9302A 1127
edb9307a MACH_EDB9307A EDB9307A 1128
omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138
vstms MACH_VSTMS VSTMS 1140
+ox820 MACH_OX820 OX820 1152
micro9m MACH_MICRO9M MICRO9M 1169
bug MACH_BUG BUG 1179
at91sam9263ek MACH_AT91SAM9263EK AT91SAM9263EK 1202
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_ARCH_MB86S7X) += clk-mb86s
obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o
obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
+obj-$(CONFIG_ARCH_OXNAS) += clk-oxnas.o
obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o
obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o
obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o

View file

@ -1,25 +0,0 @@
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -222,6 +222,12 @@ config VF_PIT_TIMER
help
Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
+config CLKSRC_RPS_TIMER
+ def_bool y if ARCH_OXNAS
+ select CLKSRC_MMIO
+ help
+ This option enables support for the oxnas rps timers.
+
config SYS_SUPPORTS_SH_CMT
bool
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exyno
obj-$(CONFIG_CLKSRC_LPC32XX) += time-lpc32xx.o
obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
obj-$(CONFIG_FSL_FTM_TIMER) += fsl_ftm_timer.o
+obj-$(CONFIG_CLKSRC_RPS_TIMER) += oxnas_rps_timer.o
obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_MTK_TIMER) += mtk_timer.o

View file

@ -1,34 +0,0 @@
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -27,6 +27,11 @@ config ARM_GIC_V3_ITS
bool
select PCI_MSI_IRQ_DOMAIN
+config PLXTECH_RPS
+ def_bool y if ARHC_OXNAS
+ depends on ARCH_OXNAS
+ select IRQ_DOMAIN
+
config ARM_NVIC
bool
select IRQ_DOMAIN
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_IRQ_MIPS_CPU) += irq-mips-
obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o
obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
+obj-$(CONFIG_PLXTECH_RPS) += irq-rps.o
obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
obj-$(CONFIG_ARCH_NSPIRE) += irq-zevio.o
obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -1253,6 +1253,7 @@ IRQCHIP_DECLARE(arm1176jzf_dc_gic, "arm,
IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init);
+IRQCHIP_DECLARE(arm11_mpcore_gic, "arm,arm11mp-gic", gic_of_init);
IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init);

View file

@ -1,28 +0,0 @@
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -228,6 +228,15 @@ config PINCTRL_COH901
COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
ports of 8 GPIO pins each.
+config PINCTRL_OXNAS
+ bool "OXNAS pinctrl driver"
+ depends on OF
+ depends on ARCH_OXNAS
+ select PINMUX
+ select PINCONF
+ help
+ Say Y here to enable the oxnas pinctrl driver
+
config PINCTRL_PALMAS
bool "Pinctrl driver for the PALMAS Series MFD devices"
depends on OF && MFD_PALMAS
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_PINCTRL_AMD) += pinctrl-amd
obj-$(CONFIG_PINCTRL_DIGICOLOR) += pinctrl-digicolor.o
obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
obj-$(CONFIG_PINCTRL_MESON) += meson/
+obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o
obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o
obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o

View file

@ -1,22 +0,0 @@
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -173,4 +173,9 @@ config PCI_HISI
help
Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC
+config PCI_OXNAS
+ bool "PLX Oxnas PCIe controller"
+ depends on ARCH_OXNAS
+ select PCIEPORTBUS
+
endmenu
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
+obj-$(CONFIG_PCI_OXNAS) += pcie-oxnas.o
obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o

View file

@ -1,20 +0,0 @@
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -12,4 +12,9 @@ menuconfig RESET_CONTROLLER
If unsure, say no.
+config RESET_CONTROLLER_OXNAS
+ bool
+ select RESET_CONTROLLER
+
source "drivers/reset/sti/Kconfig"
+
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_RESET_CONTROLLER) += core.o
+obj-$(CONFIG_RESET_CONTROLLER_OXNAS) += reset-ox820.o
obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o

View file

@ -1,24 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -563,4 +563,11 @@ config MTD_NAND_QCOM
Enables support for NAND flash chips on SoCs containing the EBI2 NAND
controller. This controller is found on IPQ806x SoC.
+config MTD_NAND_OXNAS
+ tristate "Support for NAND on Plxtech NAS782X SoC"
+ depends on ARCH_OXNAS
+ help
+ Enables support for NAND Flash chips on Plxtech NAS782X SoCs. NAND is attached
+ to the STATIC Unit.
+
endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_MTD_NAND_SOCRATES) += socr
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
+obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o
obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o

View file

@ -1,26 +0,0 @@
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -432,6 +432,13 @@ config SATA_VITESSE
If unsure, say N.
+config SATA_OXNAS
+ tristate "PLXTECH NAS782X SATA support"
+ help
+ This option enables support for Nas782x Serial ATA controller.
+
+ If unsure, say N.
+
comment "PATA SFF controllers with BMDMA"
config PATA_ALI
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_SATA_SVW) += sata_svw.o
obj-$(CONFIG_SATA_ULI) += sata_uli.o
obj-$(CONFIG_SATA_VIA) += sata_via.o
obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o
+obj-$(CONFIG_SATA_OXNAS) += sata_oxnas.o
# SFF PATA w/ BMDMA
obj-$(CONFIG_PATA_ALI) += pata_ali.o

View file

@ -1,29 +0,0 @@
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -69,6 +69,16 @@ config DWMAC_MESON
the stmmac device driver. This driver is used for Meson6 and
Meson8 SoCs.
+config DWMAC_OXNAS
+ tristate "Oxnas gmac support"
+ default ARCH_OXNAS
+ depends on OF && ARCH_OXNAS
+ help
+ Support for Ethernet controller on Oxnas SoCs.
+
+ This selects the Oxford OX82x SoC glue layer support for
+ the stmmac device driver.
+
config DWMAC_ROCKCHIP
tristate "Rockchip dwmac support"
default ARCH_ROCKCHIP
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-
obj-$(CONFIG_DWMAC_IPQ806X) += dwmac-ipq806x.o
obj-$(CONFIG_DWMAC_LPC18XX) += dwmac-lpc18xx.o
obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o
+obj-$(CONFIG_DWMAC_OXNAS) += dwmac-oxnas.o
obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o
obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-socfpga.o
obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o

View file

@ -1,26 +0,0 @@
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -315,6 +315,13 @@ config USB_OCTEON_EHCI
USB 2.0 device support. All CN6XXX based chips with USB are
supported.
+config USB_EHCI_OXNAS
+ tristate "OXNAS EHCI Module"
+ depends on USB_EHCI_HCD && ARCH_OXNAS
+ select USB_EHCI_ROOT_HUB_TT
+ ---help---
+ Enable support for the OX820 SOC's on-chip EHCI controller.
+
endif # USB_EHCI_HCD
config USB_OXU210HP_HCD
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-
obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o
+obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o

View file

@ -1,15 +0,0 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -497,7 +497,11 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-lswsgl.dtb \
orion5x-maxtor-shared-storage-2.dtb \
orion5x-rd88f5182-nas.dtb
-dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb
+dtb-$(CONFIG_ARCH_OXNAS) += ox820-akitio.dtb \
+ ox820-pogoplug-pro.dtb \
+ ox820-pogoplug-v3.dtb \
+ ox820-stg212.dtb \
+ ox820-kd20.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += \

View file

@ -1,185 +0,0 @@
Author: Adrian Panella <ianchi74@outlook.com>
Date: Fri Jun 10 19:10:15 2016 -0500
generic: Mangle bootloader's kernel arguments
The command-line arguments provided by the boot loader will be
appended to a new device tree property: bootloader-args.
If there is a property "append-rootblock" in DT under /chosen
and a root= option in bootloaders command line it will be parsed
and added to DT bootargs with the form: <append-rootblock>XX.
Only command line ATAG will be processed, the rest of the ATAGs
sent by bootloader will be ignored.
This is usefull in dual boot systems, to get the current root partition
without afecting the rest of the system.
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1943,6 +1943,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ bool "Append rootblock parsing bootloader's kernel arguments"
+ help
+ The command-line arguments provided by the boot loader will be
+ appended to a new device tree property: bootloader-args.
+ If there is a property "append-rootblock" in DT under /chosen
+ and a root= option in bootloaders command line it will be parsed
+ and added to DT bootargs with the form: <append-rootblock>XX.
+ Only command line ATAG will be processed, the rest of the ATAGs
+ sent by bootloader will be ignored.
+
endchoice
config CMDLINE
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -3,6 +3,8 @@
#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
#define do_extend_cmdline 1
+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+#define do_extend_cmdline 1
#else
#define do_extend_cmdline 0
#endif
@@ -66,6 +68,59 @@ static uint32_t get_cell_size(const void
return cell_size;
}
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+
+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
+{
+ char *ptr, *end;
+ char *root="root=";
+ int i, l;
+ const char *rootblock;
+
+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
+ ptr = str - 1;
+
+ do {
+ //first find an 'r' at the begining or after a space
+ do {
+ ptr++;
+ ptr = strchr(ptr, 'r');
+ if(!ptr) return dest;
+
+ } while (ptr != str && *(ptr-1) != ' ');
+
+ //then check for the rest
+ for(i = 1; i <= 4; i++)
+ if(*(ptr+i) != *(root+i)) break;
+
+ } while (i != 5);
+
+ end = strchr(ptr, ' ');
+ end = end ? (end - 1) : (strchr(ptr, 0) - 1);
+
+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
+ ptr = end + 1;
+
+ /* if append-rootblock property is set use it to append to command line */
+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
+ if(rootblock != NULL) {
+ if(*dest != ' ') {
+ *dest = ' ';
+ dest++;
+ len++;
+ }
+ if (len + l + i <= COMMAND_LINE_SIZE) {
+ memcpy(dest, rootblock, l);
+ dest += l - 1;
+ memcpy(dest, ptr, i);
+ dest += i;
+ }
+ }
+ return dest;
+}
+#endif
+
static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
{
char cmdline[COMMAND_LINE_SIZE];
@@ -85,12 +140,21 @@ static void merge_fdt_bootargs(void *fdt
/* and append the ATAG_CMDLINE */
if (fdt_cmdline) {
+
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+ //save original bootloader args
+ //and append ubi.mtd with root partition number to current cmdline
+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
+
+#else
len = strlen(fdt_cmdline);
if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
*ptr++ = ' ';
memcpy(ptr, fdt_cmdline, len);
ptr += len;
}
+#endif
}
*ptr = '\0';
@@ -147,7 +211,9 @@ int atags_to_fdt(void *atag_list, void *
else
setprop_string(fdt, "/chosen", "bootargs",
atag->u.cmdline.cmdline);
- } else if (atag->hdr.tag == ATAG_MEM) {
+ }
+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
+ else if (atag->hdr.tag == ATAG_MEM) {
if (memcount >= sizeof(mem_reg_property)/4)
continue;
if (!atag->u.mem.size)
@@ -186,6 +252,10 @@ int atags_to_fdt(void *atag_list, void *
setprop(fdt, "/memory", "reg", mem_reg_property,
4 * memcount * memsize);
}
+#else
+
+ }
+#endif
return fdt_pack(fdt);
}
--- a/init/main.c
+++ b/init/main.c
@@ -89,6 +89,10 @@
#include <asm/sections.h>
#include <asm/cacheflush.h>
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+#include <linux/of.h>
+#endif
+
static int kernel_init(void *);
extern void init_IRQ(void);
@@ -562,6 +566,18 @@ asmlinkage __visible void __init start_k
page_alloc_init();
pr_notice("Kernel command line: %s\n", boot_command_line);
+
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
+ //Show bootloader's original command line for reference
+ if(of_chosen) {
+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
+ if(prop)
+ pr_notice("Bootloader command line (ignored): %s\n", prop);
+ else
+ pr_notice("Bootloader command line not present\n");
+ }
+#endif
+
parse_early_param();
after_dashes = parse_args("Booting kernel",
static_command_line, __start___param,

View file

@ -1,57 +0,0 @@
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1589,6 +1589,14 @@ unsigned ata_exec_internal_sg(struct ata
return AC_ERR_SYSTEM;
}
+ if (ap->ops->acquire_hw && !ap->ops->acquire_hw(ap, 0, 0)) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ if (!ap->ops->acquire_hw(ap, 1, (2*HZ))) {
+ return AC_ERR_TIMEOUT;
+ }
+ spin_lock_irqsave(ap->lock, flags);
+ }
+
/* initialize internal qc */
/* XXX: Tag 0 is used for drivers with legacy EH as some
@@ -4788,6 +4796,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
return NULL;
+ if (ap->ops->qc_new && ap->ops->qc_new(ap))
+ return NULL;
+
/* libsas case */
if (ap->flags & ATA_FLAG_SAS_HOST) {
tag = ata_sas_allocate_tag(ap);
@@ -4833,6 +4844,8 @@ void ata_qc_free(struct ata_queued_cmd *
qc->tag = ATA_TAG_POISON;
if (ap->flags & ATA_FLAG_SAS_HOST)
ata_sas_free_tag(tag, ap);
+ if (ap->ops->qc_free)
+ ap->ops->qc_free(qc);
}
}
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -906,6 +906,8 @@ struct ata_port_operations {
void (*qc_prep)(struct ata_queued_cmd *qc);
unsigned int (*qc_issue)(struct ata_queued_cmd *qc);
bool (*qc_fill_rtf)(struct ata_queued_cmd *qc);
+ int (*qc_new)(struct ata_port *ap);
+ void (*qc_free)(struct ata_queued_cmd *qc);
/*
* Configuration and exception handling
@@ -996,6 +998,9 @@ struct ata_port_operations {
void (*phy_reset)(struct ata_port *ap);
void (*eng_timeout)(struct ata_port *ap);
+ int (*acquire_hw)(struct ata_port *ap, int may_sleep,
+ int timeout_jiffies);
+
/*
* ->inherits must be the last field and all the preceding
* fields must be pointers.

View file

@ -1,21 +0,0 @@
#
# Copyright (C) 2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/Default
NAME:=Default Profile
PRIORITY:=1
PACKAGES:=\
kmod-i2c-gpio kmod-gpio-beeper kmod-hwmon-core \
kmod-hwmon-gpiofan kmod-rtc-pcf8563 kmod-rtc-ds1307 \
kmod-usb3
endef
define Profile/Default/Description
Default package set compatible with most boards.
endef
$(eval $(call Profile,Default))