ixp4xx: remove linux 3.10 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43686
2014-12-13 11:55:04 +00:00 · 2014-12-13 11:55:04 +00:00 · 170ce29617
commit 170ce29617
parent c7e8b5ebbd
41 changed files with 0 additions and 9656 deletions
--- a/target/linux/ixp4xx/config-3.10
+++ b/target/linux/ixp4xx/config-3.10
@ -1,222 +0,0 @@
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_ARCH_ADI_COYOTE is not set
 CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
 CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
 CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
 CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
 CONFIG_ARCH_IXCDP1100=y
 CONFIG_ARCH_IXDP425=y
 CONFIG_ARCH_IXDP4XX=y
 CONFIG_ARCH_IXP4XX=y
 # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
 CONFIG_ARCH_NR_GPIO=0
 # CONFIG_ARCH_PRPMC1100 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_ARM=y
 # CONFIG_ARM_CPU_SUSPEND is not set
 CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_ARM_NR_BANKS=8
 CONFIG_ARM_PATCH_PHYS_VIRT=y
 # CONFIG_ARM_THUMB is not set
 # CONFIG_ARPD is not set
 CONFIG_ATAGS=y
 CONFIG_BOUNCE=y
 # CONFIG_CACHE_L2X0 is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_CLKSRC_MMIO=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
 CONFIG_CMDLINE_FROM_BOOTLOADER=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 CONFIG_CPU_ENDIAN_BE32=y
 # CONFIG_CPU_ENDIAN_BE8 is not set
 CONFIG_CPU_IXP43X=y
 CONFIG_CPU_IXP46X=y
 CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_USE_DOMAINS=y
 CONFIG_CPU_XSCALE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 # CONFIG_DEBUG_USER is not set
 CONFIG_DECOMPRESS_LZMA=y
 CONFIG_DMABOUNCE=y
 CONFIG_DNOTIFY=y
 CONFIG_EEPROM_AT24=y
 CONFIG_FRAME_POINTER=y
 CONFIG_GENERIC_ATOMIC64=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_IDLE_POLL_SETUP=y
 CONFIG_GENERIC_IO=y
 CONFIG_GENERIC_IRQ_SHOW=y
 CONFIG_GENERIC_PCI_IOMAP=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GENERIC_STRNCPY_FROM_USER=y
 CONFIG_GENERIC_STRNLEN_USER=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_DEVRES=y
 CONFIG_GPIO_GW_I2C_PLD=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HAMRADIO is not set
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
 CONFIG_HAVE_AOUT=y
 CONFIG_HAVE_ARCH_JUMP_LABEL=y
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_HAVE_ARCH_PFN_VALID=y
 CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
 CONFIG_HAVE_BPF_JIT=y
 CONFIG_HAVE_CONTEXT_TRACKING=y
 CONFIG_HAVE_C_RECORDMCOUNT=y
 CONFIG_HAVE_DEBUG_KMEMLEAK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_DMA_CONTIGUOUS=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_HAVE_GENERIC_HARDIRQS=y
 CONFIG_HAVE_IDE=y
 CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_HAVE_KERNEL_XZ=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_HAVE_MEMBLOCK=y
 CONFIG_HAVE_NET_DSA=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_PERF_EVENTS=y
 CONFIG_HAVE_PROC_CPU=y
 CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_HAVE_UID16=y
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_IXP4XX=y
 CONFIG_HZ_PERIODIC=y
 CONFIG_I2C=y
 CONFIG_I2C_ALGOBIT=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_GPIO=y
 # CONFIG_I2C_IOP3XX is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
 CONFIG_IRQ_WORK=y
 # CONFIG_IWMMXT is not set
 CONFIG_IXP4XX_ETH=y
 # CONFIG_IXP4XX_INDIRECT_PCI is not set
 CONFIG_IXP4XX_NPE=y
 CONFIG_IXP4XX_QMGR=y
 CONFIG_IXP4XX_WATCHDOG=y
 CONFIG_KTIME_SCALAR=y
 CONFIG_LEDS_FSG=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_LATCH=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_MACH_AP1000=y
 CONFIG_MACH_AP42X=y
 # CONFIG_MACH_ARCOM_VULCAN is not set
 CONFIG_MACH_AVILA=y
 CONFIG_MACH_CAMBRIA=y
 CONFIG_MACH_COMPEXWP18=y
 # CONFIG_MACH_DEVIXP is not set
 CONFIG_MACH_DSMG600=y
 CONFIG_MACH_FSG=y
 CONFIG_MACH_GATEWAY7001=y
 # CONFIG_MACH_GORAMO_MLR is not set
 # CONFIG_MACH_GTWX5715 is not set
 # CONFIG_MACH_IXDP465 is not set
 CONFIG_MACH_IXDPG425=y
 # CONFIG_MACH_KIXRP435 is not set
 CONFIG_MACH_LOFT=y
 CONFIG_MACH_MI424WR=y
 # CONFIG_MACH_MIC256 is not set
 # CONFIG_MACH_MICCPT is not set
 CONFIG_MACH_NAS100D=y
 CONFIG_MACH_NSLU2=y
 CONFIG_MACH_PRONGHORN=y
 CONFIG_MACH_PRONGHORNMETRO=y
 CONFIG_MACH_SIDEWINDER=y
 CONFIG_MACH_TW2662=y
 CONFIG_MACH_TW5334=y
 CONFIG_MACH_USR8200=y
 CONFIG_MACH_WG302V1=y
 CONFIG_MACH_WG302V2=y
 CONFIG_MACH_WRT300NV2=y
 CONFIG_MDIO_BOARDINFO=y
 CONFIG_MIGHT_HAVE_PCI=y
 CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 # CONFIG_MTD_CFI_GEOMETRY is not set
 CONFIG_MTD_IXP4XX=y
 CONFIG_MTD_OTP=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_MACH_IO_H=y
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NET_VENDOR_XSCALE=y
 CONFIG_OLD_SIGACTION=y
 CONFIG_OLD_SIGSUSPEND3=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PCI=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
 # CONFIG_PREEMPT_RCU is not set
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1672=y
 CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_X1205=y
 CONFIG_SCHED_HRTICK=y
 # CONFIG_SCSI_DMA is not set
 CONFIG_SENSORS_AD7418=y
 CONFIG_SENSORS_GSC=y
 CONFIG_SENSORS_MAX6650=y
 CONFIG_SENSORS_W83781D=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SPLIT_PTLOCK_CPUS=999999
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_UID16=y
 CONFIG_UIDGID_CONVERTED=y
 CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
 CONFIG_USB_ARCH_HAS_XHCI=y
 CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 CONFIG_USB_SUPPORT=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_XSCALE_PMU=y
 CONFIG_XZ_DEC_ARM=y
 CONFIG_XZ_DEC_BCJ=y
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ZBOOT_ROM_TEXT=0x0
--- a/target/linux/ixp4xx/patches-3.10/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch
+++ b/target/linux/ixp4xx/patches-3.10/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch
@ -1,136 +0,0 @@
 From 7113f56b683c5123df5c20724ac813cee66fa21a Mon Sep 17 00:00:00 2001
 From: Jonas Gorski <jogo@openwrt.org>
 Date: Mon, 1 Jul 2013 16:49:05 +0200
 Subject: [PATCH 1/2] arm: ixp4xx: set cohorent_dma_mask for ethernet platform
 devices
 ARM requires the cohorent_dma_mask set, so set it for the platform
 devices so that the ethernet driver has access to it.
 Signed-off-by: Jonas Gorski <jogo@openwrt.org>
 ---
 arch/arm/mach-ixp4xx/fsg-setup.c     |    2 ++
 arch/arm/mach-ixp4xx/goramo_mlr.c    |    2 ++
 arch/arm/mach-ixp4xx/ixdp425-setup.c |    3 +++
 arch/arm/mach-ixp4xx/nas100d-setup.c |    1 +
 arch/arm/mach-ixp4xx/nslu2-setup.c   |    1 +
 arch/arm/mach-ixp4xx/omixp-setup.c   |    3 +++
 arch/arm/mach-ixp4xx/vulcan-setup.c  |    2 ++
 7 files changed, 14 insertions(+)
 --- a/arch/arm/mach-ixp4xx/fsg-setup.c
 +++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -142,12 +142,14 @@ static struct platform_device fsg_eth[]
 		.id			= IXP4XX_ETH_NPEB,
 		.dev = {
 			.platform_data	= fsg_plat_eth,
 +			.coherent_dma_mask = DMA_BIT_MASK(32),
 		},
 	}, {
 		.name			= "ixp4xx_eth",
 		.id			= IXP4XX_ETH_NPEC,
 		.dev = {
 			.platform_data	= fsg_plat_eth + 1,
 +			.coherent_dma_mask = DMA_BIT_MASK(32),
 		},
 	}
 };
 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c
 +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -294,10 +294,12 @@ static struct platform_device device_eth
 		.name			= "ixp4xx_eth",
 		.id			= IXP4XX_ETH_NPEB,
 		.dev.platform_data	= eth_plat,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 	}, {
 		.name			= "ixp4xx_eth",
 		.id			= IXP4XX_ETH_NPEC,
 		.dev.platform_data	= eth_plat + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 	}
 };
 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
 +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -20,6 +20,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
 +#include <linux/dma-mapping.h>
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -195,10 +196,12 @@ static struct platform_device ixdp425_et
 		.name			= "ixp4xx_eth",
 		.id			= IXP4XX_ETH_NPEB,
 		.dev.platform_data	= ixdp425_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 	}, {
 		.name			= "ixp4xx_eth",
 		.id			= IXP4XX_ETH_NPEC,
 		.dev.platform_data	= ixdp425_plat_eth + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 	}
 };
 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c
 +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -170,6 +170,7 @@ static struct platform_device nas100d_et
 		.name			= "ixp4xx_eth",
 		.id			= IXP4XX_ETH_NPEB,
 		.dev.platform_data	= nas100d_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 	}
 };
 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c
 +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -182,6 +182,7 @@ static struct platform_device nslu2_eth[
 		.name			= "ixp4xx_eth",
 		.id			= IXP4XX_ETH_NPEB,
 		.dev.platform_data	= nslu2_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 	}
 };
 --- a/arch/arm/mach-ixp4xx/omixp-setup.c
 +++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -17,6 +17,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 +#include <linux/dma-mapping.h>
 #ifdef CONFIG_LEDS_CLASS
 #include <linux/leds.h>
 #endif
@@ -188,10 +189,12 @@ static struct platform_device ixdp425_et
 		.name			= "ixp4xx_eth",
 		.id			= IXP4XX_ETH_NPEB,
 		.dev.platform_data	= ixdp425_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 	}, {
 		.name			= "ixp4xx_eth",
 		.id			= IXP4XX_ETH_NPEC,
 		.dev.platform_data	= ixdp425_plat_eth + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
 };
 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c
 +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -139,6 +139,7 @@ static struct platform_device vulcan_eth
 		.id			= IXP4XX_ETH_NPEB,
 		.dev = {
 			.platform_data	= &vulcan_plat_eth[0],
 +			.coherent_dma_mask = DMA_BIT_MASK(32),
 		},
 	},
 	[1] = {
@@ -146,6 +147,7 @@ static struct platform_device vulcan_eth
 		.id			= IXP4XX_ETH_NPEC,
 		.dev = {
 			.platform_data	= &vulcan_plat_eth[1],
 +			.coherent_dma_mask = DMA_BIT_MASK(32),
 		},
 	},
 };
--- a/target/linux/ixp4xx/patches-3.10/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch
+++ b/target/linux/ixp4xx/patches-3.10/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch
@ -1,95 +0,0 @@
 From 1d67040af0144c549f4db8144d2ccc253ff8639c Mon Sep 17 00:00:00 2001
 From: Jonas Gorski <jogo@openwrt.org>
 Date: Mon, 1 Jul 2013 16:39:28 +0200
 Subject: [PATCH 2/2] net: ixp4xx_eth: use parent device for dma allocations
 Now that the platfomr device provides a dma_cohorent_mask, use it for
 dma operations.
 This fixes ethernet on ixp4xx which was broken since 3.7.
 Signed-off-by: Jonas Gorski <jogo@openwrt.org>
 ---
 drivers/net/ethernet/xscale/ixp4xx_eth.c |   23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)
 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
 +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -641,10 +641,10 @@ static inline void queue_put_desc(unsign
 static inline void dma_unmap_tx(struct port *port, struct desc *desc)
 {
 #ifdef __ARMEB__
 -	dma_unmap_single(&port->netdev->dev, desc->data,
 +	dma_unmap_single(port->netdev->dev.parent, desc->data,
 			 desc->buf_len, DMA_TO_DEVICE);
 #else
 -	dma_unmap_single(&port->netdev->dev, desc->data & ~3,
 +	dma_unmap_single(port->netdev->dev.parent, desc->data & ~3,
 			 ALIGN((desc->data & 3) + desc->buf_len, 4),
 			 DMA_TO_DEVICE);
 #endif
@@ -711,9 +711,9 @@ static int eth_poll(struct napi_struct *
 #ifdef __ARMEB__
 		if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) {
 -			phys = dma_map_single(&dev->dev, skb->data,
 +			phys = dma_map_single(dev->dev.parent, skb->data,
 					      RX_BUFF_SIZE, DMA_FROM_DEVICE);
 -			if (dma_mapping_error(&dev->dev, phys)) {
 +			if (dma_mapping_error(dev->dev.parent, phys)) {
 				dev_kfree_skb(skb);
 				skb = NULL;
 			}
@@ -736,10 +736,11 @@ static int eth_poll(struct napi_struct *
 #ifdef __ARMEB__
 		temp = skb;
 		skb = port->rx_buff_tab[n];
 -		dma_unmap_single(&dev->dev, desc->data - NET_IP_ALIGN,
 +		dma_unmap_single(dev->dev.parent, desc->data - NET_IP_ALIGN,
 				 RX_BUFF_SIZE, DMA_FROM_DEVICE);
 #else
 -		dma_sync_single_for_cpu(&dev->dev, desc->data - NET_IP_ALIGN,
 +		dma_sync_single_for_cpu(dev->dev.parent,
 +					desc->data - NET_IP_ALIGN,
 					RX_BUFF_SIZE, DMA_FROM_DEVICE);
 		memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
 			      ALIGN(NET_IP_ALIGN + desc->pkt_len, 4) / 4);
@@ -858,7 +859,7 @@ static int eth_xmit(struct sk_buff *skb,
 	memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
 #endif
 -	phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
 +	phys = dma_map_single(dev->dev.parent, mem, bytes, DMA_TO_DEVICE);
 	if (dma_mapping_error(&dev->dev, phys)) {
 		dev_kfree_skb(skb);
 #ifndef __ARMEB__
@@ -1104,7 +1105,7 @@ static int init_queues(struct port *port
 	int i;
 	if (!ports_open) {
 -		dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
 +		dma_pool = dma_pool_create(DRV_NAME, port->netdev->dev.parent,
 					   POOL_ALLOC_SIZE, 32, 0);
 		if (!dma_pool)
 			return -ENOMEM;
@@ -1132,9 +1133,9 @@ static int init_queues(struct port *port
 		data = buff;
 #endif
 		desc->buf_len = MAX_MRU;
 -		desc->data = dma_map_single(&port->netdev->dev, data,
 +		desc->data = dma_map_single(port->netdev->dev.parent, data,
 					    RX_BUFF_SIZE, DMA_FROM_DEVICE);
 -		if (dma_mapping_error(&port->netdev->dev, desc->data)) {
 +		if (dma_mapping_error(port->netdev->dev.parent, desc->data)) {
 			free_buffer(buff);
 			return -EIO;
 		}
@@ -1154,7 +1155,7 @@ static void destroy_queues(struct port *
 			struct desc *desc = rx_desc_ptr(port, i);
 			buffer_t *buff = port->rx_buff_tab[i];
 			if (buff) {
 -				dma_unmap_single(&port->netdev->dev,
 +				dma_unmap_single(port->netdev->dev.parent,
 						 desc->data - NET_IP_ALIGN,
 						 RX_BUFF_SIZE, DMA_FROM_DEVICE);
 				free_buffer(buff);
--- a/target/linux/ixp4xx/patches-3.10/020-gateworks_i2c_pld.patch
+++ b/target/linux/ixp4xx/patches-3.10/020-gateworks_i2c_pld.patch
@ -1,423 +0,0 @@
 --- a/drivers/gpio/Kconfig
 +++ b/drivers/gpio/Kconfig
@@ -625,6 +625,14 @@ config GPIO_RDC321X
 	  Support for the RDC R321x SoC GPIOs over southbridge
 	  PCI configuration space.
 +config GPIO_GW_I2C_PLD
 +	tristate "Gateworks I2C PLD GPIO Expander"
 +	depends on I2C
 +	help
 +		Say yes here to provide access to the Gateworks I2C PLD GPIO
 +		Expander. This is used at least on the GW2358-4.
 +
 +
 comment "SPI GPIO expanders:"
 config GPIO_MAX7301
 --- a/drivers/gpio/Makefile
 +++ b/drivers/gpio/Makefile
@@ -87,3 +87,4 @@ obj-$(CONFIG_GPIO_WM831X)	+= gpio-wm831x
 obj-$(CONFIG_GPIO_WM8350)	+= gpio-wm8350.o
 obj-$(CONFIG_GPIO_WM8994)	+= gpio-wm8994.o
 obj-$(CONFIG_GPIO_XILINX)	+= gpio-xilinx.o
 +obj-$(CONFIG_GPIO_GW_I2C_PLD)	+= gw_i2c_pld.o
 --- /dev/null
 +++ b/drivers/gpio/gw_i2c_pld.c
@@ -0,0 +1,373 @@
 +/*
 + * Gateworks I2C PLD GPIO expander
 + *
 + * Copyright (C) 2009 Gateworks Corporation
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License as published by
 + * the Free Software Foundation; either version 2 of the License, or
 + * (at your option) any later version.
 + *
 + * This program is distributed in the hope that it will be useful,
 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 + * GNU General Public License for more details.
 + *
 + * You should have received a copy of the GNU General Public License
 + * along with this program; if not, write to the Free Software
 + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/slab.h>
 +#include <linux/hardirq.h>
 +#include <linux/i2c.h>
 +#include <linux/i2c/gw_i2c_pld.h>
 +#include <linux/module.h>
 +#include <linux/export.h>
 +#include <asm/gpio.h>
 +
 +static const struct i2c_device_id gw_i2c_pld_id[] = {
 +	{ "gw_i2c_pld", 8 },
 +	{ }
 +};
 +MODULE_DEVICE_TABLE(i2c, gw_i2c_pld_id);
 +
 +/*
 + * The Gateworks I2C PLD chip only expose one read and one
 + * write register.  Writing a "one" bit (to match the reset state) lets
 + * that pin be used as an input. It is an open-drain model.
 + */
 +
 +struct gw_i2c_pld {
 +	struct gpio_chip	chip;
 +	struct i2c_client	*client;
 +	unsigned		out;		/* software latch */
 +};
 +
 +/*-------------------------------------------------------------------------*/
 +
 +/*
 + * The Gateworks I2C PLD chip does not properly send the acknowledge bit
 + * thus we cannot use standard i2c_smbus functions. We have recreated
 + * our own here, but we still use the rt_mutex_lock to lock the i2c_bus
 + * as the device still exists on the I2C bus.
 +*/
 +
 +#define PLD_SCL_GPIO 6
 +#define PLD_SDA_GPIO 7
 +
 +#define SCL_LO()  gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_LOW)
 +#define SCL_HI()  gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_HIGH)
 +#define SCL_EN()  gpio_line_config(PLD_SCL_GPIO, IXP4XX_GPIO_OUT)
 +#define SDA_LO()  gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_LOW)
 +#define SDA_HI()  gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_HIGH)
 +#define SDA_EN()  gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_OUT)
 +#define SDA_DIS() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_IN)
 +#define SDA_IN(x) gpio_line_get(PLD_SDA_GPIO, &x);
 +
 +static int i2c_pld_write_byte(int address, int byte)
 +{
 +	int i;
 +
 +	address = (address << 1) & ~0x1;
 +
 +	SDA_HI();
 +	SDA_EN();
 +	SCL_EN();
 +	SCL_HI();
 +	SDA_LO();
 +	SCL_LO();
 +
 +	for (i = 7; i >= 0; i--)
 +	{
 +		if (address & (1 << i))
 +			SDA_HI();
 +		else
 +			SDA_LO();
 +
 +		SCL_HI();
 +		SCL_LO();
 +	}
 +
 +	SDA_DIS();
 +	SCL_HI();
 +	SDA_IN(i);
 +	SCL_LO();
 +	SDA_EN();
 +
 +	for (i = 7; i >= 0; i--)
 +	{
 +		if (byte & (1 << i))
 +      SDA_HI();
 +		else
 +			SDA_LO();
 +		SCL_HI();
 +		SCL_LO();
 +	}
 +
 +	SDA_DIS();
 +	SCL_HI();
 +	SDA_IN(i);
 +	SCL_LO();
 +
 +	SDA_HI();
 +	SDA_EN();
 +
 +	SDA_LO();
 +	SCL_HI();
 +	SDA_HI();
 +	SCL_LO();
 +	SCL_HI();
 +
 +	return 0;
 +}
 +
 +static unsigned int i2c_pld_read_byte(int address)
 +{
 +	int i = 0, byte = 0;
 +	int bit;
 +
 +	address = (address << 1) | 0x1;
 +
 +	SDA_HI();
 +	SDA_EN();
 +	SCL_EN();
 +	SCL_HI();
 +	SDA_LO();
 +	SCL_LO();
 +
 +	for (i = 7; i >= 0; i--)
 +	{
 +		if (address & (1 << i))
 +			SDA_HI();
 +		else
 +			SDA_LO();
 +
 +		SCL_HI();
 +		SCL_LO();
 +	}
 +
 +	SDA_DIS();
 +	SCL_HI();
 +	SDA_IN(i);
 +	SCL_LO();
 +	SDA_EN();
 +
 +	SDA_DIS();
 +	for (i = 7; i >= 0; i--)
 +	{
 +		SCL_HI();
 +		SDA_IN(bit);
 +		byte |= bit << i;
 +		SCL_LO();
 +	}
 +
 +	SDA_LO();
 +	SCL_HI();
 +	SDA_HI();
 +	SCL_LO();
 +	SCL_HI();
 +
 +	return byte;
 +}
 +
 +
 +static int gw_i2c_pld_input8(struct gpio_chip *chip, unsigned offset)
 +{
 +	int ret;
 +	struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
 +	struct i2c_adapter *adap = gpio->client->adapter;
 +
 +	if (in_atomic() || irqs_disabled()) {
 +		ret = rt_mutex_trylock(&adap->bus_lock);
 +		if (!ret)
 +			/* I2C activity is ongoing. */
 +			return -EAGAIN;
 +	} else {
 +		rt_mutex_lock(&adap->bus_lock);
 +	}
 +
 +	gpio->out |= (1 << offset);
 +
 +	ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
 +
 +	rt_mutex_unlock(&adap->bus_lock);
 +
 +	return ret;
 +}
 +
 +static int gw_i2c_pld_get8(struct gpio_chip *chip, unsigned offset)
 +{
 +	int ret;
 +	s32	value;
 +	struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
 +	struct i2c_adapter *adap = gpio->client->adapter;
 +
 +	if (in_atomic() || irqs_disabled()) {
 +		ret = rt_mutex_trylock(&adap->bus_lock);
 +		if (!ret)
 +			/* I2C activity is ongoing. */
 +			return -EAGAIN;
 +	} else {
 +		rt_mutex_lock(&adap->bus_lock);
 +	}
 +
 +	value = i2c_pld_read_byte(gpio->client->addr);
 +
 +	rt_mutex_unlock(&adap->bus_lock);
 +
 +	return (value < 0) ? 0 : (value & (1 << offset));
 +}
 +
 +static int gw_i2c_pld_output8(struct gpio_chip *chip, unsigned offset, int value)
 +{
 +	int ret;
 +
 +	struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
 +	struct i2c_adapter *adap = gpio->client->adapter;
 +
 +	unsigned bit = 1 << offset;
 +
 +	if (in_atomic() || irqs_disabled()) {
 +		ret = rt_mutex_trylock(&adap->bus_lock);
 +		if (!ret)
 +			/* I2C activity is ongoing. */
 +			return -EAGAIN;
 +	} else {
 +		rt_mutex_lock(&adap->bus_lock);
 +	}
 +
 +
 +	if (value)
 +		gpio->out |= bit;
 +	else
 +		gpio->out &= ~bit;
 +
 +	ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
 +
 +	rt_mutex_unlock(&adap->bus_lock);
 +
 +	return ret;
 +}
 +
 +static void gw_i2c_pld_set8(struct gpio_chip *chip, unsigned offset, int value)
 +{
 +	gw_i2c_pld_output8(chip, offset, value);
 +}
 +
 +/*-------------------------------------------------------------------------*/
 +
 +static int gw_i2c_pld_probe(struct i2c_client *client,
 +			 const struct i2c_device_id *id)
 +{
 +	struct gw_i2c_pld_platform_data	*pdata;
 +	struct gw_i2c_pld *gpio;
 +	int status;
 +
 +	pdata = client->dev.platform_data;
 +	if (!pdata)
 +		return -ENODEV;
 +
 +	/* Allocate, initialize, and register this gpio_chip. */
 +	gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
 +	if (!gpio)
 +		return -ENOMEM;
 +
 +	gpio->chip.base = pdata->gpio_base;
 +	gpio->chip.can_sleep = 1;
 +	gpio->chip.dev = &client->dev;
 +	gpio->chip.owner = THIS_MODULE;
 +
 +	gpio->chip.ngpio = pdata->nr_gpio;
 +	gpio->chip.direction_input = gw_i2c_pld_input8;
 +	gpio->chip.get = gw_i2c_pld_get8;
 +	gpio->chip.direction_output = gw_i2c_pld_output8;
 +	gpio->chip.set = gw_i2c_pld_set8;
 +
 +	gpio->chip.label = client->name;
 +
 +	gpio->client = client;
 +	i2c_set_clientdata(client, gpio);
 +
 +	gpio->out = 0xFF;
 +
 +	status = gpiochip_add(&gpio->chip);
 +	if (status < 0)
 +		goto fail;
 +
 +	dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
 +			gpio->chip.base,
 +			gpio->chip.base + gpio->chip.ngpio - 1,
 +			client->name,
 +			client->irq ? " (irq ignored)" : "");
 +
 +	/* Let platform code set up the GPIOs and their users.
 +	 * Now is the first time anyone could use them.
 +	 */
 +	if (pdata->setup) {
 +		status = pdata->setup(client,
 +				gpio->chip.base, gpio->chip.ngpio,
 +				pdata->context);
 +		if (status < 0)
 +			dev_warn(&client->dev, "setup --> %d\n", status);
 +	}
 +
 +	return 0;
 +
 +fail:
 +	dev_dbg(&client->dev, "probe error %d for '%s'\n",
 +			status, client->name);
 +	kfree(gpio);
 +	return status;
 +}
 +
 +static int gw_i2c_pld_remove(struct i2c_client *client)
 +{
 +	struct gw_i2c_pld_platform_data	*pdata = client->dev.platform_data;
 +	struct gw_i2c_pld *gpio = i2c_get_clientdata(client);
 +	int				status = 0;
 +
 +	if (pdata->teardown) {
 +		status = pdata->teardown(client,
 +				gpio->chip.base, gpio->chip.ngpio,
 +				pdata->context);
 +		if (status < 0) {
 +			dev_err(&client->dev, "%s --> %d\n",
 +					"teardown", status);
 +			return status;
 +		}
 +	}
 +
 +	status = gpiochip_remove(&gpio->chip);
 +	if (status == 0)
 +		kfree(gpio);
 +	else
 +		dev_err(&client->dev, "%s --> %d\n", "remove", status);
 +	return status;
 +}
 +
 +static struct i2c_driver gw_i2c_pld_driver = {
 +	.driver = {
 +		.name	= "gw_i2c_pld",
 +		.owner	= THIS_MODULE,
 +	},
 +	.probe	= gw_i2c_pld_probe,
 +	.remove	= gw_i2c_pld_remove,
 +	.id_table = gw_i2c_pld_id,
 +};
 +
 +static int __init gw_i2c_pld_init(void)
 +{
 +	return i2c_add_driver(&gw_i2c_pld_driver);
 +}
 +module_init(gw_i2c_pld_init);
 +
 +static void __exit gw_i2c_pld_exit(void)
 +{
 +	i2c_del_driver(&gw_i2c_pld_driver);
 +}
 +module_exit(gw_i2c_pld_exit);
 +
 +MODULE_LICENSE("GPL");
 +MODULE_AUTHOR("Chris Lang");
 --- /dev/null
 +++ b/include/linux/i2c/gw_i2c_pld.h
@@ -0,0 +1,20 @@
 +#ifndef __LINUX_GW_I2C_PLD_H
 +#define __LINUX_GW_I2C_PLD_H
 +
 +/**
 + * The Gateworks I2C PLD Implements an additional 8 bits of GPIO through the PLD
 + */
 +
 +struct gw_i2c_pld_platform_data {
 +	unsigned gpio_base;
 +	unsigned nr_gpio;
 +	int		(*setup)(struct i2c_client *client,
 +					int gpio, unsigned ngpio,
 +					void *context);
 +	int		(*teardown)(struct i2c_client *client,
 +					int gpio, unsigned ngpio,
 +					void *context);
 +	void		*context;
 +};
 +
 +#endif /* __LINUX_GW_I2C_PLD_H */
--- a/target/linux/ixp4xx/patches-3.10/090-increase_entropy_pools.patch
+++ b/target/linux/ixp4xx/patches-3.10/090-increase_entropy_pools.patch
@ -1,15 +0,0 @@
 --- a/drivers/char/random.c
 +++ b/drivers/char/random.c
@@ -282,9 +282,9 @@
 /*
  * Configuration information
  */
 -#define INPUT_POOL_WORDS 128
 -#define OUTPUT_POOL_WORDS 32
 -#define SEC_XFER_SIZE 512
 +#define INPUT_POOL_WORDS 256
 +#define OUTPUT_POOL_WORDS 64
 +#define SEC_XFER_SIZE 1024
 #define EXTRACT_SIZE 10
 #define LONGS(x) (((x) + sizeof(unsigned long) - 1)/sizeof(unsigned long))
--- a/target/linux/ixp4xx/patches-3.10/100-wg302v2_gateway7001_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-3.10/100-wg302v2_gateway7001_mac_plat_info.patch
@ -1,78 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
 +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -17,6 +17,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 +#include <linux/dma-mapping.h>
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -75,9 +76,37 @@ static struct platform_device gateway700
 	.resource	= &gateway7001_uart_resource,
 };
 +static struct eth_plat_info gateway7001_plat_eth[] = {
 +	{
 +		.phy		= 1,
 +		.rxq		= 3,
 +		.txreadyq	= 20,
 +	}, {
 +		.phy		= 2,
 +		.rxq		= 4,
 +		.txreadyq	= 21,
 +	}
 +};
 +
 +static struct platform_device gateway7001_eth[] = {
 +	{
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEB,
 +		.dev.platform_data	= gateway7001_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}, {
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEC,
 +		.dev.platform_data	= gateway7001_plat_eth + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 static struct platform_device *gateway7001_devices[] __initdata = {
 	&gateway7001_flash,
 -	&gateway7001_uart
 +	&gateway7001_uart,
 +	&gateway7001_eth[0],
 +	&gateway7001_eth[1],
 };
 static void __init gateway7001_init(void)
 --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
 +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -76,9 +76,26 @@ static struct platform_device wg302v2_ua
 	.resource	= &wg302v2_uart_resource,
 };
 +static struct eth_plat_info wg302v2_plat_eth[] = {
 +	{
 +		.phy		= 8,
 +		.rxq		= 3,
 +		.txreadyq	= 20,
 +	}
 +};
 +
 +static struct platform_device wg302v2_eth[] = {
 +	{
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEB,
 +		.dev.platform_data	= wg302v2_plat_eth,
 +	}
 +};
 +
 static struct platform_device *wg302v2_devices[] __initdata = {
 	&wg302v2_flash,
 	&wg302v2_uart,
 +	&wg302v2_eth[0],
 };
 static void __init wg302v2_init(void)
--- a/target/linux/ixp4xx/patches-3.10/105-wg302v1_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/105-wg302v1_support.patch
@ -1,261 +0,0 @@
 --- a/arch/arm/configs/ixp4xx_defconfig
 +++ b/arch/arm/configs/ixp4xx_defconfig
@@ -13,6 +13,7 @@ CONFIG_MACH_AVILA=y
 CONFIG_MACH_LOFT=y
 CONFIG_ARCH_ADI_COYOTE=y
 CONFIG_MACH_GATEWAY7001=y
 +CONFIG_MACH_WG302V1=y
 CONFIG_MACH_WG302V2=y
 CONFIG_ARCH_IXDP425=y
 CONFIG_MACH_IXDPG425=y
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -49,6 +49,14 @@ config MACH_GATEWAY7001
 	  7001 Access Point. For more information on this platform,
 	  see http://openwrt.org
 +config MACH_WG302V1
 +	bool "Netgear WG302 v1 / WAG302 v1"
 +	select PCI
 +	help
 +	  Say 'Y' here if you want your kernel to support Netgear's
 +	  WG302 v1 or WAG302 v1 Access Points. For more information
 +	  on this platform, see http://openwrt.org
 +
 config MACH_WG302V2
 	bool "Netgear WG302 v2 / WAG302 v2"
 	select PCI
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NSLU2)		+= nslu2-p
 obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
 obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
 obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
 +obj-pci-$(CONFIG_MACH_WG302V1)		+= wg302v1-pci.o
 obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
 obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
 obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
@@ -33,6 +34,7 @@ obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.
 obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
 obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
 +obj-$(CONFIG_MACH_WG302V1)	+= wg302v1-setup.o
 obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
 obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
 obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/wg302v1-pci.c
@@ -0,0 +1,63 @@
 +/*
 + * arch/arch/mach-ixp4xx/wg302v1-pci.c
 + *
 + * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
 + *
 + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 + *
 + * based on coyote-pci.c:
 + *	Copyright (C) 2002 Jungo Software Technologies.
 + *	Copyright (C) 2003 MontaVista Software, Inc.
 + *
 + * Maintainer: Imre Kaloz <kaloz@openwrt.org>
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + *
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/pci.h>
 +#include <linux/init.h>
 +#include <linux/irq.h>
 +
 +#include <asm/mach-types.h>
 +#include <mach/hardware.h>
 +
 +#include <asm/mach/pci.h>
 +
 +void __init wg302v1_pci_preinit(void)
 +{
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
 +
 +	ixp4xx_pci_preinit();
 +}
 +
 +static int __init wg302v1_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 +{
 +	if (slot == 1)
 +		return IRQ_IXP4XX_GPIO8;
 +	else if (slot == 2)
 +		return IRQ_IXP4XX_GPIO10;
 +	else
 +		return -1;
 +}
 +
 +struct hw_pci wg302v1_pci __initdata = {
 +	.nr_controllers = 1,
 +	.preinit =        wg302v1_pci_preinit,
 +	.ops =            &ixp4xx_ops,
 +	.setup =          ixp4xx_setup,
 +	.map_irq =        wg302v1_map_irq,
 +};
 +
 +int __init wg302v1_pci_init(void)
 +{
 +	if (machine_is_wg302v1())
 +		pci_common_init(&wg302v1_pci);
 +	return 0;
 +}
 +
 +subsys_initcall(wg302v1_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
@@ -0,0 +1,147 @@
 +/*
 + * arch/arm/mach-ixp4xx/wg302v1-setup.c
 + *
 + * Board setup for the Netgear WG302 v1 and WAG302 v1
 + *
 + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 + *
 + * based on coyote-setup.c:
 + *      Copyright (C) 2003-2005 MontaVista Software, Inc.
 + *
 + * Author: Imre Kaloz <kaloz@openwrt.org>
 + *
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/init.h>
 +#include <linux/device.h>
 +#include <linux/serial.h>
 +#include <linux/tty.h>
 +#include <linux/serial_8250.h>
 +#include <linux/slab.h>
 +#include <linux/types.h>
 +#include <linux/memory.h>
 +#include <linux/dma-mapping.h>
 +
 +#include <asm/setup.h>
 +#include <mach/hardware.h>
 +#include <asm/irq.h>
 +#include <asm/mach-types.h>
 +#include <asm/mach/arch.h>
 +#include <asm/mach/flash.h>
 +
 +static struct flash_platform_data wg302v1_flash_data = {
 +	.map_name	= "cfi_probe",
 +	.width		= 2,
 +};
 +
 +static struct resource wg302v1_flash_resource = {
 +	.flags		= IORESOURCE_MEM,
 +};
 +
 +static struct platform_device wg302v1_flash = {
 +	.name		= "IXP4XX-Flash",
 +	.id		= 0,
 +	.dev		= {
 +		.platform_data = &wg302v1_flash_data,
 +	},
 +	.num_resources	= 1,
 +	.resource	= &wg302v1_flash_resource,
 +};
 +
 +static struct resource wg302v1_uart_resources[] = {
 +	{
 +		.start	= IXP4XX_UART1_BASE_PHYS,
 +		.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
 +		.flags	= IORESOURCE_MEM,
 +	},
 +	{
 +		.start	= IXP4XX_UART2_BASE_PHYS,
 +		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 +		.flags	= IORESOURCE_MEM,
 +	}
 +};
 +
 +static struct plat_serial8250_port wg302v1_uart_data[] = {
 +	{
 +		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART1,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{
 +		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART2,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{ },
 +};
 +
 +static struct platform_device wg302v1_uart = {
 +	.name		= "serial8250",
 +	.id		= PLAT8250_DEV_PLATFORM,
 +	.dev			= {
 +		.platform_data	= wg302v1_uart_data,
 +	},
 +	.num_resources	= 2,
 +	.resource	= wg302v1_uart_resources,
 +};
 +
 +static struct eth_plat_info wg302v1_plat_eth[] = {
 +	{
 +		.phy		= 30,
 +		.rxq		= 3,
 +		.txreadyq	= 20,
 +	}
 +};
 +
 +static struct platform_device wg302v1_eth[] = {
 +	{
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEB,
 +		.dev.platform_data	= wg302v1_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 +static struct platform_device *wg302v1_devices[] __initdata = {
 +	&wg302v1_flash,
 +	&wg302v1_uart,
 +	&wg302v1_eth[0],
 +};
 +
 +static void __init wg302v1_init(void)
 +{
 +	ixp4xx_sys_init();
 +
 +	wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 +	wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 +
 +	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 +	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
 +
 +	platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
 +}
 +
 +#ifdef CONFIG_MACH_WG302V1
 +MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
 +	.fixup		= wg302v1_fixup,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.init_time	= ixp4xx_timer_init,
 +	.atag_offset	= 0x0100,
 +	.init_machine	= wg302v1_init,
 +#if defined(CONFIG_PCI)
 +	.dma_zone_size	= SZ_64M,
 +#endif
 +	.restart	= ixp4xx_restart,
 +MACHINE_END
 +#endif
--- a/target/linux/ixp4xx/patches-3.10/110-pronghorn_series_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/110-pronghorn_series_support.patch
@ -1,393 +0,0 @@
 --- a/arch/arm/configs/ixp4xx_defconfig
 +++ b/arch/arm/configs/ixp4xx_defconfig
@@ -15,6 +15,8 @@ CONFIG_ARCH_ADI_COYOTE=y
 CONFIG_MACH_GATEWAY7001=y
 CONFIG_MACH_WG302V1=y
 CONFIG_MACH_WG302V2=y
 +CONFIG_MACH_PRONGHORN=y
 +CONFIG_MACH_PRONGHORNMETRO=y
 CONFIG_ARCH_IXDP425=y
 CONFIG_MACH_IXDPG425=y
 CONFIG_MACH_IXDP465=y
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -65,6 +65,22 @@ config MACH_WG302V2
 	  WG302 v2 or WAG302 v2 Access Points. For more information
 	  on this platform, see http://openwrt.org
 +config MACH_PRONGHORN
 +	bool "ADI Pronghorn series"
 +	select PCI
 +	help
 +	  Say 'Y' here if you want your kernel to support the ADI
 +	  Engineering Pronghorn series. For more
 +	  information on this platform, see http://www.adiengineering.com
 +
 +#
 +# There're only minimal differences kernel-wise between the Pronghorn and
 +# Pronghorn Metro boards - they use different chip selects to drive the
 +# CF slot connected to the expansion bus, so we just enable them together.
 +#
 +config MACH_PRONGHORNMETRO
 +	def_bool MACH_PRONGHORN
 +
 config ARCH_IXDP425
 	bool "IXDP425"
 	help
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_WG302V1)		+= wg302
 obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
 obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
 obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
 +obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
 obj-y	+= common.o
@@ -39,6 +40,7 @@ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-se
 obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
 obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
 obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
 +obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
 +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -42,7 +42,8 @@ static __inline__ void __arch_decomp_set
 	 */
 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
 	    machine_is_gateway7001() || machine_is_wg302v2() ||
 -	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
 +	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
 +	    machine_is_pronghorn() || machine_is_pronghorn_metro())
 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
 	else
 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/pronghorn-pci.c
@@ -0,0 +1,69 @@
 +/*
 + * arch/arch/mach-ixp4xx/pronghorn-pci.c
 + *
 + * PCI setup routines for ADI Engineering Pronghorn series
 + *
 + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 + *
 + * based on coyote-pci.c:
 + *	Copyright (C) 2002 Jungo Software Technologies.
 + *	Copyright (C) 2003 MontaVista Softwrae, Inc.
 + *
 + * Maintainer: Imre Kaloz <kaloz@openwrt.org>
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + *
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/pci.h>
 +#include <linux/init.h>
 +#include <linux/irq.h>
 +
 +#include <asm/mach-types.h>
 +#include <mach/hardware.h>
 +
 +#include <asm/mach/pci.h>
 +
 +void __init pronghorn_pci_preinit(void)
 +{
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
 +
 +	ixp4xx_pci_preinit();
 +}
 +
 +static int __init pronghorn_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 +{
 +	if (slot == 13)
 +		return IRQ_IXP4XX_GPIO4;
 +	else if (slot == 14)
 +		return IRQ_IXP4XX_GPIO6;
 +	else if (slot == 15)
 +		return IRQ_IXP4XX_GPIO11;
 +	else if (slot == 16)
 +		return IRQ_IXP4XX_GPIO1;
 +	else
 +		return -1;
 +}
 +
 +struct hw_pci pronghorn_pci __initdata = {
 +	.nr_controllers	= 1,
 +	.preinit	= pronghorn_pci_preinit,
 +	.ops		= &ixp4xx_ops,
 +	.setup		= ixp4xx_setup,
 +	.map_irq	= pronghorn_map_irq,
 +};
 +
 +int __init pronghorn_pci_init(void)
 +{
 +	if (machine_is_pronghorn() || machine_is_pronghorn_metro())
 +		pci_common_init(&pronghorn_pci);
 +	return 0;
 +}
 +
 +subsys_initcall(pronghorn_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
@@ -0,0 +1,252 @@
 +/*
 + * arch/arm/mach-ixp4xx/pronghorn-setup.c
 + *
 + * Board setup for the ADI Engineering Pronghorn series
 + *
 + * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
 + *
 + * based on coyote-setup.c:
 + *      Copyright (C) 2003-2005 MontaVista Software, Inc.
 + *
 + * Author: Imre Kaloz <Kaloz@openwrt.org>
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/init.h>
 +#include <linux/device.h>
 +#include <linux/serial.h>
 +#include <linux/tty.h>
 +#include <linux/serial_8250.h>
 +#include <linux/slab.h>
 +#include <linux/types.h>
 +#include <linux/memory.h>
 +#include <linux/i2c-gpio.h>
 +#include <linux/leds.h>
 +#include <linux/dma-mapping.h>
 +
 +#include <asm/setup.h>
 +#include <mach/hardware.h>
 +#include <asm/irq.h>
 +#include <asm/mach-types.h>
 +#include <asm/mach/arch.h>
 +#include <asm/mach/flash.h>
 +
 +static struct flash_platform_data pronghorn_flash_data = {
 +	.map_name	= "cfi_probe",
 +	.width		= 2,
 +};
 +
 +static struct resource pronghorn_flash_resource = {
 +	.flags		= IORESOURCE_MEM,
 +};
 +
 +static struct platform_device pronghorn_flash = {
 +	.name		= "IXP4XX-Flash",
 +	.id		= 0,
 +	.dev		= {
 +		.platform_data	= &pronghorn_flash_data,
 +	},
 +	.num_resources	= 1,
 +	.resource	= &pronghorn_flash_resource,
 +};
 +
 +static struct resource pronghorn_uart_resources [] = {
 +	{
 +		.start		= IXP4XX_UART1_BASE_PHYS,
 +		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
 +		.flags		= IORESOURCE_MEM
 +	},
 +	{
 +		.start		= IXP4XX_UART2_BASE_PHYS,
 +		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 +		.flags		= IORESOURCE_MEM
 +	}
 +};
 +
 +static struct plat_serial8250_port pronghorn_uart_data[] = {
 +	{
 +		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART1,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{
 +		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART2,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{ },
 +};
 +
 +static struct platform_device pronghorn_uart = {
 +	.name		= "serial8250",
 +	.id		= PLAT8250_DEV_PLATFORM,
 +	.dev		= {
 +		.platform_data	= pronghorn_uart_data,
 +	},
 +	.num_resources	= 2,
 +	.resource	= pronghorn_uart_resources,
 +};
 +
 +static struct i2c_gpio_platform_data pronghorn_i2c_gpio_data = {
 +	.sda_pin	= 9,
 +	.scl_pin	= 10,
 +};
 +
 +static struct platform_device pronghorn_i2c_gpio = {
 +	.name		= "i2c-gpio",
 +	.id		= 0,
 +	.dev		= {
 +		.platform_data	= &pronghorn_i2c_gpio_data,
 +	},
 +};
 +
 +static struct gpio_led pronghorn_led_pin[] = {
 +	{
 +		.name		= "pronghorn:green:status",
 +		.gpio		= 7,
 +	}
 +};
 +
 +static struct gpio_led_platform_data pronghorn_led_data = {
 +	.num_leds		= 1,
 +	.leds			= pronghorn_led_pin,
 +};
 +
 +static struct platform_device pronghorn_led = {
 +	.name			= "leds-gpio",
 +	.id			= -1,
 +	.dev.platform_data	= &pronghorn_led_data,
 +};
 +
 +static struct resource pronghorn_pata_resources[] = {
 +	{
 +		.flags	= IORESOURCE_MEM
 +	},
 +	{
 +		.flags	= IORESOURCE_MEM,
 +	},
 +	{
 +		.name	= "intrq",
 +		.start	= IRQ_IXP4XX_GPIO0,
 +		.end	= IRQ_IXP4XX_GPIO0,
 +		.flags	= IORESOURCE_IRQ,
 +	},
 +};
 +
 +static struct ixp4xx_pata_data pronghorn_pata_data = {
 +	.cs0_bits	= 0xbfff0043,
 +	.cs1_bits	= 0xbfff0043,
 +};
 +
 +static struct platform_device pronghorn_pata = {
 +	.name			= "pata_ixp4xx_cf",
 +	.id			= 0,
 +	.dev.platform_data      = &pronghorn_pata_data,
 +	.num_resources		= ARRAY_SIZE(pronghorn_pata_resources),
 +	.resource		= pronghorn_pata_resources,
 +};
 +
 +static struct eth_plat_info pronghorn_plat_eth[] = {
 +	{
 +		.phy		= 0,
 +		.rxq		= 3,
 +		.txreadyq	= 20,
 +	}, {
 +		.phy		= 1,
 +		.rxq		= 4,
 +		.txreadyq	= 21,
 +	}
 +};
 +
 +static struct platform_device pronghorn_eth[] = {
 +	{
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEB,
 +		.dev.platform_data	= pronghorn_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}, {
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEC,
 +		.dev.platform_data	= pronghorn_plat_eth + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 +static struct platform_device *pronghorn_devices[] __initdata = {
 +	&pronghorn_flash,
 +	&pronghorn_uart,
 +	&pronghorn_led,
 +	&pronghorn_eth[0],
 +	&pronghorn_eth[1],
 +};
 +
 +static void __init pronghorn_init(void)
 +{
 +	ixp4xx_sys_init();
 +
 +	pronghorn_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 +	pronghorn_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 +
 +	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 +	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
 +
 +	platform_add_devices(pronghorn_devices, ARRAY_SIZE(pronghorn_devices));
 +
 +	if (machine_is_pronghorn()) {
 +		pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
 +		pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
 +
 +		pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
 +		pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
 +
 +		pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
 +		pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
 +	} else {
 +		pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(3);
 +		pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(3);
 +
 +		pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(4);
 +		pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(4);
 +
 +		pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
 +		pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS4;
 +
 +		platform_device_register(&pronghorn_i2c_gpio);
 +	}
 +
 +	platform_device_register(&pronghorn_pata);
 +}
 +
 +MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.init_time	= ixp4xx_timer_init,
 +	.atag_offset	= 0x0100,
 +	.init_machine	= pronghorn_init,
 +#if defined(CONFIG_PCI)
 +	.dma_zone_size	= SZ_64M,
 +#endif
 +	.restart	= ixp4xx_restart,
 +MACHINE_END
 +
 +MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.init_time	= ixp4xx_timer_init,
 +	.atag_offset	= 0x0100,
 +	.init_machine	= pronghorn_init,
 +#if defined(CONFIG_PCI)
 +	.dma_zone_size	= SZ_64M,
 +#endif
 +	.restart	= ixp4xx_restart,
 +MACHINE_END
--- a/target/linux/ixp4xx/patches-3.10/111-pronghorn_swap_uarts.patch
+++ b/target/linux/ixp4xx/patches-3.10/111-pronghorn_swap_uarts.patch
@ -1,44 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/pronghorn-setup.c
 +++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
@@ -52,31 +52,31 @@ static struct platform_device pronghorn_
 static struct resource pronghorn_uart_resources [] = {
 	{
 -		.start		= IXP4XX_UART1_BASE_PHYS,
 -		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
 +		.start		= IXP4XX_UART2_BASE_PHYS,
 +		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 		.flags		= IORESOURCE_MEM
 	},
 	{
 -		.start		= IXP4XX_UART2_BASE_PHYS,
 -		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 +		.start		= IXP4XX_UART1_BASE_PHYS,
 +		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
 		.flags		= IORESOURCE_MEM
 	}
 };
 static struct plat_serial8250_port pronghorn_uart_data[] = {
 	{
 -		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 -		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 -		.irq		= IRQ_IXP4XX_UART1,
 +		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= IXP4XX_UART_XTAL,
 	},
 	{
 -		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 -		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 -		.irq		= IRQ_IXP4XX_UART2,
 +		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
--- a/target/linux/ixp4xx/patches-3.10/115-sidewinder_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/115-sidewinder_support.patch
@ -1,286 +0,0 @@
 From 95dac4a842a3c66f69f949b48f9075e16275f77b Mon Sep 17 00:00:00 2001
 From: Jonas Gorski <jogo@openwrt.org>
 Date: Sun, 30 Jun 2013 15:48:47 +0200
 Subject: [PATCH 07/36] 115-sidewinder_support.patch
 ---
 arch/arm/mach-ixp4xx/Kconfig            |   10 +-
 arch/arm/mach-ixp4xx/Makefile           |    2 +
 arch/arm/mach-ixp4xx/sidewinder-pci.c   |   68 ++++++++++++++
 arch/arm/mach-ixp4xx/sidewinder-setup.c |  151 +++++++++++++++++++++++++++++++
 4 files changed, 230 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-ixp4xx/sidewinder-pci.c
 create mode 100644 arch/arm/mach-ixp4xx/sidewinder-setup.c
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -81,6 +81,14 @@ config MACH_PRONGHORN
 config MACH_PRONGHORNMETRO
 	def_bool MACH_PRONGHORN
 +config MACH_SIDEWINDER
 +	bool "ADI Sidewinder"
 +	select PCI
 +	help
 +	  Say 'Y' here if you want your kernel to support the ADI 
 +	  Engineering Sidewinder board. For more information on this
 +	  platform, see http://www.adiengineering.com
 +
 config ARCH_IXDP425
 	bool "IXDP425"
 	help
@@ -177,7 +185,7 @@ config MACH_ARCOM_VULCAN
 #
 config CPU_IXP46X
 	bool
 -	depends on MACH_IXDP465
 +	depends on MACH_IXDP465 || MACH_SIDEWINDER
 	default y
 config CPU_IXP43X
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302
 obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
 obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
 obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
 +obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
 obj-y	+= common.o
@@ -41,6 +42,7 @@ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
 obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
 obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
 obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
 +obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/sidewinder-pci.c
@@ -0,0 +1,67 @@
 +/*
 + * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
 + *
 + * PCI setup routines for ADI Engineering Sidewinder
 + *
 + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 + *
 + * based on coyote-pci.c:
 + *	Copyright (C) 2002 Jungo Software Technologies.
 + *	Copyright (C) 2003 MontaVista Softwrae, Inc.
 + *
 + * Maintainer: Imre Kaloz <kaloz@openwrt.org>
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + *
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/pci.h>
 +#include <linux/init.h>
 +#include <linux/irq.h>
 +
 +#include <asm/mach-types.h>
 +#include <mach/hardware.h>
 +#include <asm/irq.h>
 +
 +#include <asm/mach/pci.h>
 +
 +void __init sidewinder_pci_preinit(void)
 +{
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
 +
 +	ixp4xx_pci_preinit();
 +}
 +
 +static int __init sidewinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 +{
 +	if (slot == 1)
 +		return IRQ_IXP4XX_GPIO11;
 +	else if (slot == 2)
 +		return IRQ_IXP4XX_GPIO10;
 +	else if (slot == 3)
 +		return IRQ_IXP4XX_GPIO9;
 +	else
 +		return -1;
 +}
 +
 +struct hw_pci sidewinder_pci __initdata = {
 +	.nr_controllers	= 1,
 +	.preinit	= sidewinder_pci_preinit,
 +	.ops		= &ixp4xx_ops,
 +	.setup		= ixp4xx_setup,
 +	.map_irq	= sidewinder_map_irq,
 +};
 +
 +int __init sidewinder_pci_init(void)
 +{
 +	if (machine_is_sidewinder())
 +		pci_common_init(&sidewinder_pci);
 +	return 0;
 +}
 +
 +subsys_initcall(sidewinder_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
@@ -0,0 +1,155 @@
 +/*
 + * arch/arm/mach-ixp4xx/sidewinder-setup.c
 + *
 + * Board setup for the ADI Engineering Sidewinder
 + *
 + * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
 + *
 + * based on coyote-setup.c:
 + *      Copyright (C) 2003-2005 MontaVista Software, Inc.
 + *
 + * Author: Imre Kaloz <Kaloz@openwrt.org>
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/serial.h>
 +#include <linux/serial_8250.h>
 +#include <linux/dma-mapping.h>
 +
 +#include <asm/mach-types.h>
 +#include <asm/mach/arch.h>
 +#include <asm/mach/flash.h>
 +
 +static struct flash_platform_data sidewinder_flash_data = {
 +	.map_name	= "cfi_probe",
 +	.width		= 2,
 +};
 +
 +static struct resource sidewinder_flash_resource = {
 +	.flags		= IORESOURCE_MEM,
 +};
 +
 +static struct platform_device sidewinder_flash = {
 +	.name		= "IXP4XX-Flash",
 +	.id		= 0,
 +	.dev		= {
 +		.platform_data = &sidewinder_flash_data,
 +	},
 +	.num_resources	= 1,
 +	.resource	= &sidewinder_flash_resource,
 +};
 +
 +static struct resource sidewinder_uart_resources[] = {
 +	{
 +		.start	= IXP4XX_UART1_BASE_PHYS,
 +		.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
 +		.flags	= IORESOURCE_MEM,
 +	},
 +	{
 +		.start	= IXP4XX_UART2_BASE_PHYS,
 +		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 +		.flags	= IORESOURCE_MEM,
 +	}
 +};
 +
 +static struct plat_serial8250_port sidewinder_uart_data[] = {
 +	{
 +		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART1,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{
 +		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART2,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{ },
 +};
 +
 +static struct platform_device sidewinder_uart = {
 +	.name		= "serial8250",
 +	.id		= PLAT8250_DEV_PLATFORM,
 +	.dev		= {
 +		.platform_data	= sidewinder_uart_data,
 +	},
 +	.num_resources	= ARRAY_SIZE(sidewinder_uart_resources),
 +	.resource	= sidewinder_uart_resources,
 +};
 +
 +static struct eth_plat_info sidewinder_plat_eth[] = {
 +	{
 +		.phy		= 5,
 +		.rxq		= 3,
 +		.txreadyq	= 20,
 +	}, {
 +		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
 +		.phy_mask	= 0x1e,
 +		.rxq		= 4,
 +		.txreadyq	= 21,
 +	}, {
 +		.phy		= 31,
 +		.rxq		= 2,
 +		.txreadyq	= 19,
 +	}
 +};
 +
 +static struct platform_device sidewinder_eth[] = {
 +	{
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEB,
 +		.dev.platform_data	= sidewinder_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}, {
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEC,
 +		.dev.platform_data	= sidewinder_plat_eth + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}, {
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEA,
 +		.dev.platform_data	= sidewinder_plat_eth + 2,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 +static struct platform_device *sidewinder_devices[] __initdata = {
 +	&sidewinder_flash,
 +	&sidewinder_uart,
 +	&sidewinder_eth[0],
 +	&sidewinder_eth[1],
 +	&sidewinder_eth[2],
 +};
 +
 +static void __init sidewinder_init(void)
 +{
 +	ixp4xx_sys_init();
 +
 +	sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 +	sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
 +
 +	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 +	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
 +
 +	platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
 +}
 +
 +MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.init_time	= ixp4xx_timer_init,
 +	.atag_offset	= 0x0100,
 +	.init_machine	= sidewinder_init,
 +#if defined(CONFIG_PCI)
 +	.dma_zone_size	= SZ_64M,
 +#endif
 +	.restart	= ixp4xx_restart,
 +MACHINE_END
--- a/target/linux/ixp4xx/patches-3.10/116-sidewinder_fis_location.patch
+++ b/target/linux/ixp4xx/patches-3.10/116-sidewinder_fis_location.patch
@ -1,30 +0,0 @@
 --- a/drivers/mtd/redboot.c
 +++ b/drivers/mtd/redboot.c
@@ -30,6 +30,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/module.h>
 +#include <asm/mach-types.h>
 +
 struct fis_image_desc {
     unsigned char name[16];      // Null terminated name
     uint32_t	  flash_base;    // Address within FLASH of image
@@ -47,7 +49,8 @@ struct fis_list {
 	struct fis_list *next;
 };
 -static int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
 +int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
 +
 module_param(directory, int, 0);
 static inline int redboot_checksum(struct fis_image_desc *img)
@@ -75,6 +78,8 @@ static int parse_redboot_partitions(stru
 #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
 	static char nullstring[] = "unallocated";
 #endif
 +	if (machine_is_sidewinder())
 +		directory = -5;
 	if ( directory < 0 ) {
 		offset = master->size + directory * master->erasesize;
--- a/target/linux/ixp4xx/patches-3.10/120-compex_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/120-compex_support.patch
@ -1,199 +0,0 @@
 From 24025a2dcf1248079dd3019fac6ed955252d277f Mon Sep 17 00:00:00 2001
 From: Imre Kaloz <kaloz@openwrt.org>
 Date: Mon, 14 Jul 2008 21:56:34 +0200
 Subject: [PATCH] Add support for the Compex WP18 / NP18A boards
 Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
 ---
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -89,6 +89,14 @@ config MACH_SIDEWINDER
 	  Engineering Sidewinder board. For more information on this
 	  platform, see http://www.adiengineering.com
 +config MACH_COMPEXWP18
 +	bool "Compex WP18 / NP18A"
 +	select PCI
 +	help
 +	  Say 'Y' here if you want your kernel to support Compex' 
 +	  WP18 or NP18A boards. For more information on this
 +	  platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
 +
 config ARCH_IXDP425
 	bool "IXDP425"
 	help
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
 obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
 obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
 obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
 +obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
 obj-y	+= common.o
@@ -43,6 +44,7 @@ obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_
 obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
 obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
 obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
 +obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/compex42x-setup.c
@@ -0,0 +1,141 @@
 +/*
 + * arch/arm/mach-ixp4xx/compex-setup.c
 + *
 + * Compex WP18 / NP18A board-setup
 + *
 + * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
 + *
 + * based on coyote-setup.c:
 + *	Copyright (C) 2003-2005 MontaVista Software, Inc.
 + *
 + * Author: Imre Kaloz <Kaloz@openwrt.org>
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/serial.h>
 +#include <linux/serial_8250.h>
 +#include <linux/dma-mapping.h>
 +
 +#include <asm/mach-types.h>
 +#include <asm/mach/arch.h>
 +#include <asm/mach/flash.h>
 +
 +static struct flash_platform_data compex42x_flash_data = {
 +	.map_name	= "cfi_probe",
 +	.width		= 2,
 +};
 +
 +static struct resource compex42x_flash_resource = {
 +	.flags		= IORESOURCE_MEM,
 +};
 +
 +static struct platform_device compex42x_flash = {
 +	.name		= "IXP4XX-Flash",
 +	.id		= 0,
 +	.dev		= {
 +		.platform_data = &compex42x_flash_data,
 +	},
 +	.num_resources	= 1,
 +	.resource	= &compex42x_flash_resource,
 +};
 +
 +static struct resource compex42x_uart_resources[] = {
 +	{
 +		.start		= IXP4XX_UART1_BASE_PHYS,
 +		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
 +		.flags		= IORESOURCE_MEM
 +	},
 +	{
 +		.start		= IXP4XX_UART2_BASE_PHYS,
 +		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 +		.flags		= IORESOURCE_MEM
 +	}
 +};
 +
 +static struct plat_serial8250_port compex42x_uart_data[] = {
 +	{
 +		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART1,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{
 +		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART2,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{ },
 +};
 +
 +static struct platform_device compex42x_uart = {
 +	.name			= "serial8250",
 +	.id			= PLAT8250_DEV_PLATFORM,
 +	.dev.platform_data	= compex42x_uart_data,
 +	.num_resources		= 2,
 +	.resource		= compex42x_uart_resources,
 +};
 +
 +static struct eth_plat_info compex42x_plat_eth[] = {
 +	{
 +		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
 +		.phy_mask	= 0xf0000,
 +		.rxq		= 3,
 +		.txreadyq	= 20,
 +	}, {
 +		.phy		= 3,
 +		.rxq		= 4,
 +		.txreadyq	= 21,
 +	}
 +};
 +
 +static struct platform_device compex42x_eth[] = {
 +	{
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEB,
 +		.dev.platform_data	= compex42x_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}, {
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEC,
 +		.dev.platform_data	= compex42x_plat_eth + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 +static struct platform_device *compex42x_devices[] __initdata = {
 +	&compex42x_flash,
 +	&compex42x_uart,
 +	&compex42x_eth[0],
 +	&compex42x_eth[1],
 +};
 +
 +static void __init compex42x_init(void)
 +{
 +	ixp4xx_sys_init();
 +
 +	compex42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 +	compex42x_flash_resource.end =
 +		IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 +
 +	platform_add_devices(compex42x_devices, ARRAY_SIZE(compex42x_devices));
 +}
 +
 +MACHINE_START(COMPEXWP18, "Compex WP18 / NP18A")
 +	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.init_time	= ixp4xx_timer_init,
 +	.atag_offset	= 0x0100,
 +	.init_machine	= compex42x_init,
 +#if defined(CONFIG_PCI)
 +	.dma_zone_size	= SZ_64M,
 +#endif
 +	.restart	= ixp4xx_restart,
 +MACHINE_END
 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
 +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -69,7 +69,8 @@ struct hw_pci ixdp425_pci __initdata = {
 int __init ixdp425_pci_init(void)
 {
 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
 -			machine_is_ixdp465() || machine_is_kixrp435())
 +			machine_is_ixdp465() || machine_is_kixrp435() ||
 +			machine_is_compex42x())
 		pci_common_init(&ixdp425_pci);
 	return 0;
 }
--- a/target/linux/ixp4xx/patches-3.10/130-wrt300nv2_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/130-wrt300nv2_support.patch
@ -1,227 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -97,6 +97,14 @@ config MACH_COMPEXWP18
 	  WP18 or NP18A boards. For more information on this
 	  platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
 +config MACH_WRT300NV2
 +	bool "Linksys WRT300N v2"
 +	select PCI
 +	help
 +	  Say 'Y' here if you want your kernel to support Linksys'
 +	  WRT300N v2 router. For more information on this
 +	  platform, see http://openwrt.org
 +
 config ARCH_IXDP425
 	bool "IXDP425"
 	help
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= v
 obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-pci.o
 obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
 obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
 +obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
 obj-y	+= common.o
@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulca
 obj-$(CONFIG_MACH_PRONGHORN)	+= pronghorn-setup.o
 obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
 obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
 +obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
 +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -43,7 +43,8 @@ static __inline__ void __arch_decomp_set
 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
 	    machine_is_gateway7001() || machine_is_wg302v2() ||
 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
 -	    machine_is_pronghorn() || machine_is_pronghorn_metro())
 +	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
 +	    machine_is_wrt300nv2())
 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
 	else
 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
@@ -0,0 +1,64 @@
 +/*
 + * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
 + *
 + * PCI setup routines for Linksys WRT300N v2
 + *
 + * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
 + *
 + * based on coyote-pci.c:
 + *	Copyright (C) 2002 Jungo Software Technologies.
 + *	Copyright (C) 2003 MontaVista Softwrae, Inc.
 + *
 + * Maintainer: Imre Kaloz <kaloz@openwrt.org>
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + *
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/pci.h>
 +#include <linux/init.h>
 +#include <linux/irq.h>
 +
 +#include <asm/mach-types.h>
 +#include <mach/hardware.h>
 +#include <asm/irq.h>
 +
 +#include <asm/mach/pci.h>
 +
 +extern void ixp4xx_pci_preinit(void);
 +extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
 +extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
 +
 +void __init wrt300nv2_pci_preinit(void)
 +{
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
 +
 +	ixp4xx_pci_preinit();
 +}
 +
 +static int __init wrt300nv2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 +{
 +	if (slot == 1)
 +		return IRQ_IXP4XX_GPIO8;
 +	else return -1;
 +}
 +
 +struct hw_pci wrt300nv2_pci __initdata = {
 +	.nr_controllers = 1,
 +	.preinit	= wrt300nv2_pci_preinit,
 +	.ops		= &ixp4xx_ops,
 +	.setup		= ixp4xx_setup,
 +	.map_irq	= wrt300nv2_map_irq,
 +};
 +
 +int __init wrt300nv2_pci_init(void)
 +{
 +	if (machine_is_wrt300nv2())
 +		pci_common_init(&wrt300nv2_pci);
 +	return 0;
 +}
 +
 +subsys_initcall(wrt300nv2_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
@@ -0,0 +1,110 @@
 +/*
 + * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
 + *
 + * Board setup for the Linksys WRT300N v2
 + *
 + * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
 + *
 + * based on coyote-setup.c:
 + *      Copyright (C) 2003-2005 MontaVista Software, Inc.
 + *
 + * Author: Imre Kaloz <Kaloz@openwrt.org>
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/init.h>
 +#include <linux/device.h>
 +#include <linux/serial.h>
 +#include <linux/tty.h>
 +#include <linux/serial_8250.h>
 +#include <linux/slab.h>
 +
 +#include <asm/types.h>
 +#include <asm/setup.h>
 +#include <asm/memory.h>
 +#include <mach/hardware.h>
 +#include <asm/irq.h>
 +#include <asm/mach-types.h>
 +#include <asm/mach/arch.h>
 +#include <asm/mach/flash.h>
 +
 +static struct flash_platform_data wrt300nv2_flash_data = {
 +	.map_name	= "cfi_probe",
 +	.width		= 2,
 +};
 +
 +static struct resource wrt300nv2_flash_resource = {
 +	.flags		= IORESOURCE_MEM,
 +};
 +
 +static struct platform_device wrt300nv2_flash = {
 +	.name		= "IXP4XX-Flash",
 +	.id		= 0,
 +	.dev		= {
 +		.platform_data = &wrt300nv2_flash_data,
 +	},
 +	.num_resources	= 1,
 +	.resource	= &wrt300nv2_flash_resource,
 +};
 +
 +static struct resource wrt300nv2_uart_resource = {
 +	.start	= IXP4XX_UART2_BASE_PHYS,
 +	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 +	.flags	= IORESOURCE_MEM,
 +};
 +
 +static struct plat_serial8250_port wrt300nv2_uart_data[] = {
 +	{
 +		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART2,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{ },
 +};
 +
 +static struct platform_device wrt300nv2_uart = {
 +	.name		= "serial8250",
 +	.id		= PLAT8250_DEV_PLATFORM,
 +	.dev			= {
 +		.platform_data	= wrt300nv2_uart_data,
 +	},
 +	.num_resources	= 1,
 +	.resource	= &wrt300nv2_uart_resource,
 +};
 +
 +static struct platform_device *wrt300nv2_devices[] __initdata = {
 +	&wrt300nv2_flash,
 +	&wrt300nv2_uart
 +};
 +
 +static void __init wrt300nv2_init(void)
 +{
 +	ixp4xx_sys_init();
 +
 +	wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 +	wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 +
 +	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 +	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
 +
 +	platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
 +}
 +
 +#ifdef CONFIG_MACH_WRT300NV2
 +MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.init_time	= ixp4xx_timer_init,
 +	.atag_offset	= 0x0100,
 +	.init_machine	= wrt300nv2_init,
 +#if defined(CONFIG_PCI)
 +	.dma_zone_size	= SZ_64M,
 +#endif
 +	.restart	= ixp4xx_restart,
 +MACHINE_END
 +#endif
--- a/target/linux/ixp4xx/patches-3.10/131-wrt300nv2_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-3.10/131-wrt300nv2_mac_plat_info.patch
@ -1,42 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
 +++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
@@ -76,9 +76,38 @@ static struct platform_device wrt300nv2_
 	.resource	= &wrt300nv2_uart_resource,
 };
 +/* Built-in 10/100 Ethernet MAC interfaces */
 +static struct eth_plat_info wrt300nv2_plat_eth[] = {
 +	{
 +		.phy		= -1,
 +		.rxq		= 3,
 +		.txreadyq	= 20,
 +	}, {
 +		.phy		= 1,
 +		.rxq		= 4,
 +		.txreadyq	= 21,
 +	}
 +};
 +
 +static struct platform_device wrt300nv2_eth[] = {
 +	{
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEB,
 +		.dev.platform_data	= wrt300nv2_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}, {
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEC,
 +		.dev.platform_data	= wrt300nv2_plat_eth + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 static struct platform_device *wrt300nv2_devices[] __initdata = {
 	&wrt300nv2_flash,
 -	&wrt300nv2_uart
 +	&wrt300nv2_uart,
 +	&wrt300nv2_eth[0],
 +	&wrt300nv2_eth[1],
 };
 static void __init wrt300nv2_init(void)
--- a/target/linux/ixp4xx/patches-3.10/132-wrt300nv2_mac_fix.patch
+++ b/target/linux/ixp4xx/patches-3.10/132-wrt300nv2_mac_fix.patch
@ -1,72 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
 +++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
@@ -3,6 +3,7 @@
  *
  * Board setup for the Linksys WRT300N v2
  *
 + * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
  * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
  *
  * based on coyote-setup.c:
@@ -18,6 +19,7 @@
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/slab.h>
 +#include <linux/etherdevice.h>
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -79,7 +81,8 @@ static struct platform_device wrt300nv2_
 /* Built-in 10/100 Ethernet MAC interfaces */
 static struct eth_plat_info wrt300nv2_plat_eth[] = {
 	{
 -		.phy		= -1,
 +		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
 +		.phy_mask	= 0x0F0000,
 		.rxq		= 3,
 		.txreadyq	= 20,
 	}, {
@@ -112,6 +115,10 @@ static struct platform_device *wrt300nv2
 static void __init wrt300nv2_init(void)
 {
 +	uint8_t __iomem *f;
 +	int offset = 0;
 +	int i;
 +
 	ixp4xx_sys_init();
 	wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
@@ -121,6 +128,32 @@ static void __init wrt300nv2_init(void)
 	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
 	platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
 +
 +	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x60000);
 +
 +	if (f) {
 +		for (i = 0; i < 6; i++) {
 +#ifdef __ARMEB__
 +			wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + i);
 +			if (i == 5)
 +				offset = 1;
 +			wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
 +#else
 +			wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + (i^3));
 +			if (i == 5)
 +				offset = 1;
 +			wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
 +#endif
 +		}
 +		iounmap(f);
 +	}
 +
 +	if (!(is_valid_ether_addr(wrt300nv2_plat_eth[0].hwaddr)))
 +		random_ether_addr(wrt300nv2_plat_eth[0].hwaddr);
 +	if (!(is_valid_ether_addr(wrt300nv2_plat_eth[1].hwaddr))) {
 +		memcpy(wrt300nv2_plat_eth[1].hwaddr, wrt300nv2_plat_eth[0].hwaddr, ETH_ALEN);
 +		wrt300nv2_plat_eth[1].hwaddr[5] = (wrt300nv2_plat_eth[0].hwaddr[5] + 1);
 +	}
 }
 #ifdef CONFIG_MACH_WRT300NV2
--- a/target/linux/ixp4xx/patches-3.10/150-lanready_ap1000_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/150-lanready_ap1000_support.patch
@ -1,203 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -105,6 +105,14 @@ config MACH_WRT300NV2
 	  WRT300N v2 router. For more information on this
 	  platform, see http://openwrt.org
 +config MACH_AP1000
 +	bool "Lanready AP-1000"
 +	select PCI
 +	help
 +	  Say 'Y' here if you want your kernel to support Lanready's
 +	  AP1000 board. For more information on this
 +	  platform, see http://openwrt.org
 +
 config ARCH_IXDP425
 	bool "IXDP425"
 	help
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN)	+= pron
 obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-pci.o
 obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
 obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
 +obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
 obj-y	+= common.o
@@ -47,6 +48,7 @@ obj-$(CONFIG_MACH_PRONGHORN)	+= pronghor
 obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
 obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
 obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
 +obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
@@ -0,0 +1,154 @@
 +/*
 + * arch/arm/mach-ixp4xx/ap1000-setup.c
 + *
 + * Lanready AP-1000
 + *
 + * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
 + *
 + * based on ixdp425-setup.c:
 + *	Copyright (C) 2003-2005 MontaVista Software, Inc.
 + *
 + * Author: Imre Kaloz <Kaloz@openwrt.org>
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/init.h>
 +#include <linux/device.h>
 +#include <linux/serial.h>
 +#include <linux/tty.h>
 +#include <linux/serial_8250.h>
 +#include <linux/slab.h>
 +#include <linux/dma-mapping.h>
 +
 +#include <asm/types.h>
 +#include <asm/setup.h>
 +#include <asm/memory.h>
 +#include <mach/hardware.h>
 +#include <asm/mach-types.h>
 +#include <asm/irq.h>
 +#include <asm/mach/arch.h>
 +#include <asm/mach/flash.h>
 +
 +static struct flash_platform_data ap1000_flash_data = {
 +	.map_name	= "cfi_probe",
 +	.width		= 2,
 +};
 +
 +static struct resource ap1000_flash_resource = {
 +	.flags		= IORESOURCE_MEM,
 +};
 +
 +static struct platform_device ap1000_flash = {
 +	.name		= "IXP4XX-Flash",
 +	.id		= 0,
 +	.dev		= {
 +		.platform_data = &ap1000_flash_data,
 +	},
 +	.num_resources	= 1,
 +	.resource	= &ap1000_flash_resource,
 +};
 +
 +static struct resource ap1000_uart_resources[] = {
 +	{
 +		.start		= IXP4XX_UART1_BASE_PHYS,
 +		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
 +		.flags		= IORESOURCE_MEM
 +	},
 +	{
 +		.start		= IXP4XX_UART2_BASE_PHYS,
 +		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 +		.flags		= IORESOURCE_MEM
 +	}
 +};
 +
 +static struct plat_serial8250_port ap1000_uart_data[] = {
 +	{
 +		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART1,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{
 +		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART2,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{ },
 +};
 +
 +static struct platform_device ap1000_uart = {
 +	.name			= "serial8250",
 +	.id			= PLAT8250_DEV_PLATFORM,
 +	.dev.platform_data	= ap1000_uart_data,
 +	.num_resources		= 2,
 +	.resource		= ap1000_uart_resources
 +};
 +
 +static struct platform_device *ap1000_devices[] __initdata = {
 +	&ap1000_flash,
 +	&ap1000_uart
 +};
 +
 +static char ap1000_mem_fixup[] __initdata = "mem=64M ";
 +
 +static void __init ap1000_fixup(struct machine_desc *desc,
 +		struct tag *tags, char **cmdline, struct meminfo *mi)
 +
 +{
 +	struct tag *t = tags;
 +	char *p = *cmdline;
 +
 +	/* Find the end of the tags table, taking note of any cmdline tag. */
 +	for (; t->hdr.size; t = tag_next(t)) {
 +		if (t->hdr.tag == ATAG_CMDLINE) {
 +			p = t->u.cmdline.cmdline;
 +		}
 +	}
 +
 +	/* Overwrite the end of the table with a new cmdline tag. */
 +	t->hdr.tag = ATAG_CMDLINE;
 +	t->hdr.size = (sizeof (struct tag_header) +
 +		strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
 +	strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
 +	strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
 +		COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
 +
 +	/* Terminate the table. */
 +	t = tag_next(t);
 +	t->hdr.tag = ATAG_NONE;
 +	t->hdr.size = 0;
 +}
 +
 +static void __init ap1000_init(void)
 +{
 +	ixp4xx_sys_init();
 +
 +	ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 +	ap1000_flash_resource.end =
 +		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 +
 +	platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
 +}
 +
 +#ifdef CONFIG_MACH_AP1000
 +MACHINE_START(AP1000, "Lanready AP-1000")
 +	/* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
 +	.fixup		= ap1000_fixup,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.init_time	= ixp4xx_timer_init,
 +	.atag_offset	= 0x0100,
 +	.init_machine	= ap1000_init,
 +#if defined(CONFIG_PCI)
 +	.dma_zone_size	= SZ_64M,
 +#endif
 +	.restart	= ixp4xx_restart,
 +MACHINE_END
 +#endif
 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
 +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -70,7 +70,7 @@ int __init ixdp425_pci_init(void)
 {
 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
 			machine_is_ixdp465() || machine_is_kixrp435() ||
 -			machine_is_compex42x())
 +			machine_is_compex42x() || machine_is_ap1000())
 		pci_common_init(&ixdp425_pci);
 	return 0;
 }
--- a/target/linux/ixp4xx/patches-3.10/151-lanready_ap1000_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-3.10/151-lanready_ap1000_mac_plat_info.patch
@ -1,51 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/ap1000-setup.c
 +++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
@@ -91,15 +91,45 @@ static struct platform_device ap1000_uar
 	.resource		= ap1000_uart_resources
 };
 +/* Built-in 10/100 Ethernet MAC interfaces */
 +static struct eth_plat_info ap1000_plat_eth[] = {
 +	{
 +		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
 +		.phy_mask	= 0x1e,
 +		.rxq		= 3,
 +		.txreadyq	= 20,
 +	}, {
 +		.phy		= 5,
 +		.rxq		= 4,
 +		.txreadyq	= 21,
 +	}
 +};
 +
 +static struct platform_device ap1000_eth[] = {
 +	{
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEB,
 +		.dev.platform_data	= ap1000_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}, {
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEC,
 +		.dev.platform_data	= ap1000_plat_eth + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 static struct platform_device *ap1000_devices[] __initdata = {
 	&ap1000_flash,
 -	&ap1000_uart
 +	&ap1000_uart,
 +	&ap1000_eth[0],
 +	&ap1000_eth[1],
 };
 static char ap1000_mem_fixup[] __initdata = "mem=64M ";
 -static void __init ap1000_fixup(struct machine_desc *desc,
 -		struct tag *tags, char **cmdline, struct meminfo *mi)
 +static void __init ap1000_fixup(struct tag *tags, char **cmdline,
 +				struct meminfo *mi)
 {
 	struct tag *t = tags;
--- a/target/linux/ixp4xx/patches-3.10/160-delayed_uart_io.patch
+++ b/target/linux/ixp4xx/patches-3.10/160-delayed_uart_io.patch
@ -1,121 +0,0 @@
 --- a/drivers/tty/serial/8250/8250_core.c
 +++ b/drivers/tty/serial/8250/8250_core.c
@@ -410,6 +410,20 @@ static void mem_serial_out(struct uart_p
 	writeb(value, p->membase + offset);
 }
 +static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
 +{
 +	struct uart_8250_port *up = (struct uart_8250_port *)p;
 +	udelay(up->port.rw_delay);
 +	return mem_serial_in(p, offset);
 +}
 +
 +static void memdelay_serial_out(struct uart_port *p, int offset, int value)
 +{
 +	struct uart_8250_port *up = (struct uart_8250_port *)p;
 +	udelay(up->port.rw_delay);
 +	mem_serial_out(p, offset, value);
 +}
 +
 static void mem32_serial_out(struct uart_port *p, int offset, int value)
 {
 	offset = offset << p->regshift;
@@ -461,6 +475,11 @@ static void set_io_from_upio(struct uart
 		p->serial_out = mem32_serial_out;
 		break;
 +	case UPIO_MEM_DELAY:
 +		p->serial_in = memdelay_serial_in;
 +		p->serial_out = memdelay_serial_out;
 +		break;
 +
 #if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
 	case UPIO_AU:
 		p->serial_in = au_serial_in;
@@ -486,6 +505,7 @@ serial_port_out_sync(struct uart_port *p
 	switch (p->iotype) {
 	case UPIO_MEM:
 	case UPIO_MEM32:
 +	case UPIO_MEM_DELAY:
 	case UPIO_AU:
 		p->serial_out(p, offset, value);
 		p->serial_in(p, UART_LCR);	/* safe, no side-effects */
@@ -2520,6 +2540,7 @@ static int serial8250_request_std_resour
 	case UPIO_TSI:
 	case UPIO_MEM32:
 	case UPIO_MEM:
 +	case UPIO_MEM_DELAY:
 		if (!port->mapbase)
 			break;
@@ -2556,6 +2577,7 @@ static void serial8250_release_std_resou
 	case UPIO_TSI:
 	case UPIO_MEM32:
 	case UPIO_MEM:
 +	case UPIO_MEM_DELAY:
 		if (!port->mapbase)
 			break;
@@ -3095,6 +3117,7 @@ static int serial8250_probe(struct platf
 		uart.port.set_termios	= p->set_termios;
 		uart.port.pm		= p->pm;
 		uart.port.dev		= &dev->dev;
 +		uart.port.rw_delay	= p->rw_delay;
 		uart.port.irqflags	|= irqflag;
 		ret = serial8250_register_8250_port(&uart);
 		if (ret < 0) {
@@ -3246,6 +3269,7 @@ int serial8250_register_8250_port(struct
 		uart->port.flags        = up->port.flags | UPF_BOOT_AUTOCONF;
 		uart->bugs		= up->bugs;
 		uart->port.mapbase      = up->port.mapbase;
 +		uart->port.rw_delay	= up->port.rw_delay;
 		uart->port.private_data = up->port.private_data;
 		uart->port.fifosize	= up->port.fifosize;
 		uart->tx_loadsz		= up->tx_loadsz;
 --- a/drivers/tty/serial/serial_core.c
 +++ b/drivers/tty/serial/serial_core.c
@@ -2089,6 +2089,7 @@ uart_report_port(struct uart_driver *drv
 		snprintf(address, sizeof(address),
 			 "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
 		break;
 +	case UPIO_MEM_DELAY:
 	case UPIO_MEM:
 	case UPIO_MEM32:
 	case UPIO_AU:
@@ -2710,6 +2711,7 @@ int uart_match_port(struct uart_port *po
 	case UPIO_HUB6:
 		return (port1->iobase == port2->iobase) &&
 		       (port1->hub6   == port2->hub6);
 +	case UPIO_MEM_DELAY:
 	case UPIO_MEM:
 	case UPIO_MEM32:
 	case UPIO_AU:
 --- a/include/linux/serial_8250.h
 +++ b/include/linux/serial_8250.h
@@ -27,6 +27,7 @@ struct plat_serial8250_port {
 	void            *private_data;
 	unsigned char	regshift;	/* register shift */
 	unsigned char	iotype;		/* UPIO_* */
 +	unsigned int rw_delay;	/* udelay for slower busses IXP4XX Expansion Bus */
 	unsigned char	hub6;
 	upf_t		flags;		/* UPF_* flags */
 	unsigned int	type;		/* If UPF_FIXED_TYPE */
 --- a/include/linux/serial_core.h
 +++ b/include/linux/serial_core.h
@@ -135,6 +135,7 @@ struct uart_port {
 #define UPIO_MEM32		(3)
 #define UPIO_AU			(4)			/* Au1x00 and RT288x type IO */
 #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
 +#define UPIO_MEM_DELAY		(6)
 	unsigned int		read_status_mask;	/* driver specific */
 	unsigned int		ignore_status_mask;	/* driver specific */
@@ -183,6 +184,7 @@ struct uart_port {
 	unsigned int		mctrl;			/* current modem ctrl settings */
 	unsigned int		timeout;		/* character-based timeout */
 +	unsigned int		rw_delay;		/* udelay for slow busses, IXP4XX Expansion Bus */
 	unsigned int		type;			/* port type */
 	const struct uart_ops	*ops;
 	unsigned int		custom_divisor;
--- a/target/linux/ixp4xx/patches-3.10/162-wg302v1_mem_fixup.patch
+++ b/target/linux/ixp4xx/patches-3.10/162-wg302v1_mem_fixup.patch
@ -1,38 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
 +++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
@@ -117,6 +117,35 @@ static struct platform_device *wg302v1_d
 	&wg302v1_eth[0],
 };
 +static char wg302v1_mem_fixup[] __initdata = " mem=32M";
 +
 +static void __init wg302v1_fixup(struct tag *tags, char **cmdline,
 +				 struct meminfo *mi)
 +{
 +	struct tag *t = tags;
 +	char *p = *cmdline;
 +	size_t fixlen, cmdlen;
 +
 +	/* Find the end of the tags table, taking note of any cmdline tag. */
 +	for (; t->hdr.size; t = tag_next(t)) {
 +		if (t->hdr.tag == ATAG_CMDLINE) {
 +			p = t->u.cmdline.cmdline;
 +		}
 +	}
 +
 +	fixlen = strlen(wg302v1_mem_fixup);
 +	cmdlen = strlen(p);
 +	if (fixlen + cmdlen >= COMMAND_LINE_SIZE)
 +		return;
 +
 +	/* append the fixup to the cmdline */
 +	memmove(p + cmdlen, wg302v1_mem_fixup, fixlen + 1);
 +
 +	/* Adjust the size of the atag if there was one */
 +	if (t->hdr.size)
 +		t->hdr.size += fixlen;
 +}
 +
 static void __init wg302v1_init(void)
 {
 	ixp4xx_sys_init();
--- a/target/linux/ixp4xx/patches-3.10/170-ixdpg425_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-3.10/170-ixdpg425_mac_plat_info.patch
@ -1,51 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/coyote-setup.c
 +++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -14,6 +14,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 +#include <linux/dma-mapping.h>
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -81,9 +82,39 @@ static struct platform_device coyote_uar
 	.resource	= &coyote_uart_resource,
 };
 +/* Built-in 10/100 Ethernet MAC interfaces */
 +static struct eth_plat_info ixdpg425_plat_eth[] = {
 +        {
 +                .phy            = 5,
 +                .rxq            = 3,
 +                .txreadyq       = 20,
 +        }, {
 +                .phy            = 4,
 +                .rxq            = 4,
 +                .txreadyq       = 21,
 +        }
 +};
 +
 +static struct platform_device ixdpg425_eth[] = {
 +	{
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEB,
 +		.dev.platform_data	= ixdpg425_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}, {
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEC,
 +		.dev.platform_data	= ixdpg425_plat_eth + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 +
 static struct platform_device *coyote_devices[] __initdata = {
 	&coyote_flash,
 -	&coyote_uart
 +	&coyote_uart,
 +	&ixdpg425_eth[0],
 +	&ixdpg425_eth[1],
 };
 static void __init coyote_init(void)
--- a/target/linux/ixp4xx/patches-3.10/175-avila_hss_audio_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/175-avila_hss_audio_support.patch
--- a/target/linux/ixp4xx/patches-3.10/180-tw5334_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/180-tw5334_support.patch
@ -1,287 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -164,6 +164,14 @@ config ARCH_PRPMC1100
 	  PrPCM1100 Processor Mezanine Module. For more information on
 	  this platform, see <file:Documentation/arm/IXP4xx>.
 +config MACH_TW5334
 +	bool "Titan Wireless TW-533-4"
 +	select PCI
 +	help
 +	  Say 'Y' here if you want your kernel to support the Titan
 +	  Wireless TW533-4. For more information on this platform,
 +	  see http://openwrt.org
 +
 config MACH_NAS100D
 	bool
 	prompt "NAS100D"
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
@@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sid
 obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
 obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
 obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
 +obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
 obj-y	+= common.o
@@ -49,6 +50,7 @@ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewin
 obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
 obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
 obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
 +obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
 +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -44,7 +44,7 @@ static __inline__ void __arch_decomp_set
 	    machine_is_gateway7001() || machine_is_wg302v2() ||
 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
 -	    machine_is_wrt300nv2())
 +	    machine_is_wrt300nv2() || machine_is_tw5334())
 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
 	else
 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/tw5334-pci.c
@@ -0,0 +1,68 @@
 +/*
 + * arch/arch/mach-ixp4xx/tw5334-pci.c
 + *
 + * PCI setup routines for the Titan Wireless TW-533-4
 + *
 + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 + *
 + * based on coyote-pci.c:
 + *	Copyright (C) 2002 Jungo Software Technologies.
 + *	Copyright (C) 2003 MontaVista Softwrae, Inc.
 + *
 + * Maintainer: Imre Kaloz <kaloz@openwrt.org>
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + *
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/pci.h>
 +#include <linux/init.h>
 +#include <linux/irq.h>
 +
 +#include <asm/mach-types.h>
 +#include <mach/hardware.h>
 +
 +#include <asm/mach/pci.h>
 +
 +void __init tw5334_pci_preinit(void)
 +{
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_LEVEL_LOW);
 +
 +	ixp4xx_pci_preinit();
 +}
 +
 +static int __init tw5334_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 +{
 +	if (slot == 12)
 +		return IRQ_IXP4XX_GPIO6;
 +	else if (slot == 13)
 +		return IRQ_IXP4XX_GPIO2;
 +	else if (slot == 14)
 +		return IRQ_IXP4XX_GPIO1;
 +	else if (slot == 15)
 +		return IRQ_IXP4XX_GPIO0;
 +	else return -1;
 +}
 +
 +struct hw_pci tw5334_pci __initdata = {
 +	.nr_controllers = 1,
 +	.preinit =        tw5334_pci_preinit,
 +	.ops =            &ixp4xx_ops,
 +	.setup =          ixp4xx_setup,
 +	.map_irq =        tw5334_map_irq,
 +};
 +
 +int __init tw5334_pci_init(void)
 +{
 +	if (machine_is_tw5334())
 +		pci_common_init(&tw5334_pci);
 +	return 0;
 +}
 +
 +subsys_initcall(tw5334_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
@@ -0,0 +1,167 @@
 +/*
 + * arch/arm/mach-ixp4xx/tw5334-setup.c
 + *
 + * Board setup for the Titan Wireless TW-533-4
 + *
 + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 + *
 + * based on coyote-setup.c:
 + *      Copyright (C) 2003-2005 MontaVista Software, Inc.
 + *
 + * Author: Imre Kaloz <Kaloz@openwrt.org>
 + */
 +
 +#include <linux/if_ether.h>
 +#include <linux/kernel.h>
 +#include <linux/init.h>
 +#include <linux/device.h>
 +#include <linux/serial.h>
 +#include <linux/tty.h>
 +#include <linux/serial_8250.h>
 +#include <linux/slab.h>
 +
 +#include <asm/types.h>
 +#include <asm/setup.h>
 +#include <asm/memory.h>
 +#include <mach/hardware.h>
 +#include <asm/irq.h>
 +#include <asm/mach-types.h>
 +#include <asm/mach/arch.h>
 +#include <asm/mach/flash.h>
 +
 +static struct flash_platform_data tw5334_flash_data = {
 +	.map_name	= "cfi_probe",
 +	.width		= 2,
 +};
 +
 +static struct resource tw5334_flash_resource = {
 +	.flags		= IORESOURCE_MEM,
 +};
 +
 +static struct platform_device tw5334_flash = {
 +	.name		= "IXP4XX-Flash",
 +	.id		= 0,
 +	.dev		= {
 +		.platform_data = &tw5334_flash_data,
 +	},
 +	.num_resources	= 1,
 +	.resource	= &tw5334_flash_resource,
 +};
 +
 +static struct resource tw5334_uart_resource = {
 +	.start	= IXP4XX_UART2_BASE_PHYS,
 +	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 +	.flags	= IORESOURCE_MEM,
 +};
 +
 +static struct plat_serial8250_port tw5334_uart_data[] = {
 +	{
 +		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART2,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{ },
 +};
 +
 +static struct platform_device tw5334_uart = {
 +	.name		= "serial8250",
 +	.id		= PLAT8250_DEV_PLATFORM,
 +	.dev			= {
 +		.platform_data	= tw5334_uart_data,
 +	},
 +	.num_resources	= 1,
 +	.resource	= &tw5334_uart_resource,
 +};
 +
 +/* Built-in 10/100 Ethernet MAC interfaces */
 +static struct eth_plat_info tw5334_plat_eth[] = {
 +        {
 +                .phy            = 0,
 +                .rxq            = 3,
 +		.txreadyq	= 20,
 +        }, {
 +                .phy            = 1,
 +                .rxq            = 4,
 +		.txreadyq	= 21,
 +	}
 +};
 +
 +static struct platform_device tw5334_eth[] = {
 +        {
 +                .name                   = "ixp4xx_eth",
 +                .id                     = IXP4XX_ETH_NPEB,
 +                .dev.platform_data      = tw5334_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +        }, {
 +                .name                   = "ixp4xx_eth",
 +                .id                     = IXP4XX_ETH_NPEC,
 +                .dev.platform_data      = tw5334_plat_eth + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 +static struct platform_device *tw5334_devices[] __initdata = {
 +	&tw5334_flash,
 +	&tw5334_uart,
 +	&tw5334_eth[0],
 +	&tw5334_eth[1],
 +};
 +
 +static void __init tw5334_init(void)
 +{
 +	uint8_t __iomem *f;
 +	int i;
 +
 +	ixp4xx_sys_init();
 +
 +	tw5334_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 +	tw5334_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 +
 +	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 +	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
 +
 +	platform_add_devices(tw5334_devices, ARRAY_SIZE(tw5334_devices));
 +
 +	/*
 +	 * Map in a portion of the flash and read the MAC addresses.
 +	 * Since it is stored in BE in the flash itself, we need to
 +	 * byteswap it if we're in LE mode.
 +	 */
 +	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
 +	if (f) {
 +		for (i = 0; i < 6; i++) {
 +#ifdef __ARMEB__
 +			tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + i);
 +			tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + i);
 +#else
 +			tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + (i^3));
 +			tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + (i^3));
 +#endif
 +		}
 +		iounmap(f);
 +	}
 +
 +	printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 0\n",
 +		tw5334_plat_eth[0].hwaddr);
 +	printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 1\n",
 +		tw5334_plat_eth[1].hwaddr);
 +}
 +
 +#ifdef CONFIG_MACH_TW5334
 +MACHINE_START(TW5334, "Titan Wireless TW-533-4")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.init_time	= ixp4xx_timer_init,
 +	.atag_offset	= 0x0100,
 +	.init_machine	= tw5334_init,
 +#if defined(CONFIG_PCI)
 +	.dma_zone_size	= SZ_64M,
 +#endif
 +	.restart	= ixp4xx_restart,
 +MACHINE_END
 +#endif
--- a/target/linux/ixp4xx/patches-3.10/185-mi424wr_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/185-mi424wr_support.patch
@ -1,507 +0,0 @@
 --- a/arch/arm/configs/ixp4xx_defconfig
 +++ b/arch/arm/configs/ixp4xx_defconfig
@@ -26,6 +26,7 @@ CONFIG_MACH_NAS100D=y
 CONFIG_MACH_DSMG600=y
 CONFIG_MACH_FSG=y
 CONFIG_MACH_GTWX5715=y
 +CONFIG_MACH_MI424WR=y
 CONFIG_IXP4XX_QMGR=y
 CONFIG_IXP4XX_NPE=y
 # CONFIG_ARM_THUMB is not set
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -262,6 +262,13 @@ config MACH_MIC256
 	  Say 'Y' here if you want your kernel to support the MIC256
 	  board from OMICRON electronics GmbH.
 +config MACH_MI424WR
 +	bool "Actiontec MI424WR"
 +	depends on ARCH_IXP4XX
 +	select PCI
 +	help
 +		Add support for the Actiontec MI424-WR.
 +
 comment "IXP4xx Options"
 config IXP4XX_INDIRECT_PCI
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixd
 obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
 obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
 obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
 +obj-pci-$(CONFIG_MACH_MI424WR)		+= mi424wr-pci.o
 obj-y	+= common.o
@@ -51,6 +52,7 @@ obj-$(CONFIG_MACH_COMPEXWP18)	+= compex4
 obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
 obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
 obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
 +obj-$(CONFIG_MACH_MI424WR)	+= mi424wr-setup.o
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/mi424wr-pci.c
@@ -0,0 +1,70 @@
 +/*
 + * arch/arm/mach-ixp4xx/mi424wr-pci.c
 + *
 + * Actiontec MI424WR board-level PCI initialization
 + *
 + * Copyright (C) 2008 Jose Vasconcellos
 + *
 + * Maintainer: Jose Vasconcellos <jvasco@verizon.net>
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + *
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/pci.h>
 +#include <linux/init.h>
 +#include <linux/irq.h>
 +
 +#include <asm/mach-types.h>
 +#include <asm/mach/pci.h>
 +
 +/* PCI controller GPIO to IRQ pin mappings
 + * This information was obtained from Actiontec's GPL release.
 + *
 + *		INTA		INTB
 + * SLOT 13	8		6
 + * SLOT 14	7		8
 + * SLOT 15	6		7
 + */
 +
 +void __init mi424wr_pci_preinit(void)
 +{
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
 +
 +	ixp4xx_pci_preinit();
 +}
 +
 +static int __init mi424wr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 +{
 +	if (slot == 13)
 +		return IRQ_IXP4XX_GPIO8;
 +	if (slot == 14)
 +		return IRQ_IXP4XX_GPIO7;
 +	if (slot == 15)
 +		return IRQ_IXP4XX_GPIO6;
 +
 +	return -1;
 +}
 +
 +struct hw_pci mi424wr_pci __initdata = {
 +	.nr_controllers = 1,
 +	.preinit	= mi424wr_pci_preinit,
 +	.ops		= &ixp4xx_ops,
 +	.setup		= ixp4xx_setup,
 +	.map_irq	= mi424wr_map_irq,
 +};
 +
 +int __init mi424wr_pci_init(void)
 +{
 +	if (machine_is_mi424wr())
 +		pci_common_init(&mi424wr_pci);
 +	return 0;
 +}
 +
 +subsys_initcall(mi424wr_pci_init);
 +
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
@@ -0,0 +1,387 @@
 +/*
 + * arch/arm/mach-ixp4xx/mi424wr-setup.c
 + *
 + * Actiontec MI424-WR board setup
 + * Copyright (c) 2008 Jose Vasconcellos
 + *
 + * Based on Gemtek GTWX5715 by
 + * Copyright (C) 2004 George T. Joseph
 + * Derived from Coyote
 + *
 + * This program is free software; you can redistribute it and/or
 + * modify it under the terms of the GNU General Public License
 + * as published by the Free Software Foundation; either version 2
 + * of the License, or (at your option) any later version.
 + *
 + * This program is distributed in the hope that it will be useful,
 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 + * GNU General Public License for more details.
 + *
 + * You should have received a copy of the GNU General Public License
 + * along with this program; if not, write to the Free Software
 + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 + *
 + */
 +
 +#include <linux/init.h>
 +#include <linux/device.h>
 +#include <linux/serial.h>
 +#include <linux/serial_8250.h>
 +#include <linux/types.h>
 +#include <linux/memory.h>
 +#include <linux/leds.h>
 +#include <linux/spi/spi_gpio_old.h>
 +#include <linux/dma-mapping.h>
 +
 +#include <asm/setup.h>
 +#include <asm/system_info.h>
 +#include <asm/irq.h>
 +#include <asm/io.h>
 +#include <asm/mach-types.h>
 +#include <asm/mach/arch.h>
 +#include <asm/mach/flash.h>
 +
 +/*
 + * GPIO 2,3,4 and 9 are hard wired to the Micrel/Kendin KS8995M Switch
 + * and operate as an SPI type interface.  The details of the interface
 + * are available on Kendin/Micrel's web site.
 + */
 +
 +#define MI424WR_KSSPI_SELECT		9
 +#define MI424WR_KSSPI_TXD		4
 +#define MI424WR_KSSPI_CLOCK		2
 +#define MI424WR_KSSPI_RXD		3
 +
 +/*
 + * The "reset" button is wired to GPIO 10.
 + * The GPIO is brought "low" when the button is pushed.
 + */
 +
 +#define MI424WR_BUTTON_GPIO	10
 +#define MI424WR_BUTTON_IRQ	IRQ_IXP4XX_GPIO10
 +
 +#define MI424WR_MOCA_WAN_LED	11
 +
 +/* Latch on CS1 - taken from Actiontec's 2.4 source code
 + * 
 + * default latch value
 + * 0  - power alarm led (red)           0 (off)
 + * 1  - power led (green)               0 (off)
 + * 2  - wireless led    (green)         1 (off)
 + * 3  - no internet led (red)           0 (off)
 + * 4  - internet ok led (green)         0 (off)
 + * 5  - moca LAN                        0 (off)
 + * 6  - WAN alarm led (red)		0 (off)
 + * 7  - PCI reset                       1 (not reset)
 + * 8  - IP phone 1 led (green)          1 (off)
 + * 9  - IP phone 2 led (green)          1 (off)
 + * 10 - VOIP ready led (green)          1 (off)
 + * 11 - PSTN relay 1 control            0 (PSTN)
 + * 12 - PSTN relay 1 control            0 (PSTN)
 + * 13 - N/A
 + * 14 - N/A
 + * 15 - N/A
 + */
 +
 +#define MI424WR_LATCH_MASK              0x04
 +#define MI424WR_LATCH_DEFAULT           0x1f86
 +
 +#define MI424WR_LATCH_ALARM_LED         0x00
 +#define MI424WR_LATCH_POWER_LED         0x01
 +#define MI424WR_LATCH_WIRELESS_LED      0x02
 +#define MI424WR_LATCH_INET_DOWN_LED     0x03
 +#define MI424WR_LATCH_INET_OK_LED       0x04
 +#define MI424WR_LATCH_MOCA_LAN_LED      0x05
 +#define MI424WR_LATCH_WAN_ALARM_LED     0x06
 +#define MI424WR_LATCH_PCI_RESET         0x07
 +#define MI424WR_LATCH_PHONE1_LED        0x08
 +#define MI424WR_LATCH_PHONE2_LED        0x09
 +#define MI424WR_LATCH_VOIP_LED          0x10
 +#define MI424WR_LATCH_PSTN_RELAY1       0x11
 +#define MI424WR_LATCH_PSTN_RELAY2       0x12
 +
 +/* initialize CS1 to default timings, Intel style, 16-bit bus */
 +#define MI424WR_CS1_CONFIG	0x80000002
 +
 +/* Define both UARTs but they are not easily accessible.
 + */
 +
 +static struct resource mi424wr_uart_resources[] = {
 +	{
 +		.start	= IXP4XX_UART1_BASE_PHYS,
 +		.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
 +		.flags	= IORESOURCE_MEM,
 +	},
 +	{
 +		.start	= IXP4XX_UART2_BASE_PHYS,
 +		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 +		.flags	= IORESOURCE_MEM,
 +	}
 +};
 +
 +
 +static struct plat_serial8250_port mi424wr_uart_platform_data[] = {
 +	{
 +		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART1,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{
 +		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART2,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{ },
 +};
 +
 +static struct platform_device mi424wr_uart_device = {
 +	.name		= "serial8250",
 +	.id		= PLAT8250_DEV_PLATFORM,
 +	.dev.platform_data	= mi424wr_uart_platform_data,
 +	.num_resources	= ARRAY_SIZE(mi424wr_uart_resources),
 +	.resource	= mi424wr_uart_resources,
 +};
 +
 +static struct flash_platform_data mi424wr_flash_data = {
 +	.map_name	= "cfi_probe",
 +	.width		= 2,
 +};
 +
 +static struct resource mi424wr_flash_resource = {
 +	.flags		= IORESOURCE_MEM,
 +};
 +
 +static struct platform_device mi424wr_flash = {
 +	.name		= "IXP4XX-Flash",
 +	.id		= 0,
 +	.dev.platform_data = &mi424wr_flash_data,
 +	.num_resources	= 1,
 +	.resource	= &mi424wr_flash_resource,
 +};
 +
 +static int mi424wr_spi_boardinfo_setup(struct spi_board_info *bi,
 +		struct spi_master *master, void *data)
 +{
 +
 +	strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
 +
 +	bi->max_speed_hz = 5000000 /* Hz */;
 +	bi->bus_num = master->bus_num;
 +	bi->mode = SPI_MODE_0;
 +
 +	return 0;
 +}
 +
 +static struct spi_gpio_platform_data mi424wr_spi_bus_data = {
 +	.pin_cs			= MI424WR_KSSPI_SELECT,
 +	.pin_clk		= MI424WR_KSSPI_CLOCK,
 +	.pin_miso		= MI424WR_KSSPI_RXD,
 +	.pin_mosi		= MI424WR_KSSPI_TXD,
 +	.cs_activelow		= 1,
 +	.no_spi_delay		= 1,
 +	.boardinfo_setup	= mi424wr_spi_boardinfo_setup,
 +};
 +
 +static struct gpio_led mi424wr_gpio_led[] = {
 +	{
 +		.name		= "moca-wan",	/* green led */
 +		.gpio		= MI424WR_MOCA_WAN_LED,
 +		.active_low	= 0,
 +	}
 +};
 +
 +static struct gpio_led_platform_data mi424wr_gpio_leds_data = {
 +	.num_leds	= 1,
 +	.leds		= mi424wr_gpio_led,
 +};
 +
 +static struct platform_device mi424wr_gpio_leds = {
 +	.name		= "leds-gpio",
 +	.id		= -1,
 +	.dev.platform_data = &mi424wr_gpio_leds_data,
 +};
 +
 +static uint16_t latch_value = MI424WR_LATCH_DEFAULT;
 +static uint16_t __iomem *iobase;
 +
 +static void mi424wr_latch_set_led(u8 bit, enum led_brightness value)
 +{
 +
 +	if (((MI424WR_LATCH_MASK >> bit) & 1) ^ (value == LED_OFF))
 +		latch_value &= ~(0x1 << bit);
 +	else
 +		latch_value |= (0x1 << bit);
 +
 +	__raw_writew(latch_value, iobase);
 +
 +}
 +
 +static struct latch_led mi424wr_latch_led[] = {
 +	{
 +		.name	= "power-alarm",
 +		.bit	= MI424WR_LATCH_ALARM_LED,
 +	},
 +	{
 +		.name	= "power-ok",
 +		.bit	= MI424WR_LATCH_POWER_LED,
 +	},
 +	{
 +		.name	= "wireless",	/* green led */
 +		.bit	= MI424WR_LATCH_WIRELESS_LED,
 +	},
 +	{
 +		.name	= "inet-down",	/* red led */
 +		.bit	= MI424WR_LATCH_INET_DOWN_LED,
 +	},
 +	{
 +		.name	= "inet-up",	/* green led */
 +		.bit	= MI424WR_LATCH_INET_OK_LED,
 +	},
 +	{
 +		.name	= "moca-lan",	/* green led */
 +		.bit	= MI424WR_LATCH_MOCA_LAN_LED,
 +	},
 +	{
 +		.name	= "wan-alarm",	/* red led */
 +		.bit	= MI424WR_LATCH_WAN_ALARM_LED,
 +	}
 +};
 +
 +static struct latch_led_platform_data mi424wr_latch_leds_data = {
 +	.num_leds	= ARRAY_SIZE(mi424wr_latch_led),
 +	.mem		= 0x51000000,
 +	.leds		= mi424wr_latch_led,
 +	.set_led        = mi424wr_latch_set_led,
 +};
 +
 +static struct platform_device mi424wr_latch_leds = {
 +	.name		= "leds-latch",
 +	.id		= -1,
 +	.dev.platform_data = &mi424wr_latch_leds_data,
 +};
 +
 +static struct platform_device mi424wr_spi_bus = {
 +	.name		= "spi-gpio",
 +	.id		= 0,
 +	.dev.platform_data = &mi424wr_spi_bus_data,
 +};
 +
 +static struct eth_plat_info mi424wr_wan_data = {
 +	.phy		= 17,	/* KS8721 */
 +	.rxq		= 3,
 +	.txreadyq	= 20,
 +};
 +
 +static struct eth_plat_info mi424wr_lan_data = {
 +	.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
 +	.phy_mask	= 0x1e, /* ports 1-4 of the KS8995 switch */
 +	.rxq		= 4,
 +	.txreadyq	= 21,
 +};
 +
 +static struct platform_device mi424wr_npe_devices[] = {
 +	{
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEC,
 +		.dev.platform_data	= &mi424wr_lan_data,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}, {
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEB,
 +		.dev.platform_data	= &mi424wr_wan_data,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 +static struct eth_plat_info mi424wr_wanD_data = {
 +	.phy		= 5,
 +	.rxq		= 4,
 +	.txreadyq	= 21,
 +};
 +
 +static struct eth_plat_info mi424wr_lanD_data = {
 +	.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
 +	.phy_mask	= 0x1e, /* ports 1-4 of the KS8995 switch */
 +	.rxq		= 3,
 +	.txreadyq	= 20,
 +};
 +
 +static struct platform_device mi424wr_npeD_devices[] = {
 +	{
 +		.name                   = "ixp4xx_eth",
 +		.id                     = IXP4XX_ETH_NPEB,
 +		.dev.platform_data      = &mi424wr_lanD_data,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}, {
 +		.name                   = "ixp4xx_eth",
 +		.id                     = IXP4XX_ETH_NPEC,
 +		.dev.platform_data      = &mi424wr_wanD_data,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 +static struct platform_device *mi424wr_devices[] __initdata = {
 +	&mi424wr_uart_device,
 +	&mi424wr_flash,
 +	&mi424wr_gpio_leds,
 +	&mi424wr_latch_leds,
 +	&mi424wr_spi_bus,
 +};
 +
 +static void __init mi424wr_init(void)
 +{
 +	ixp4xx_sys_init();
 +
 +	mi424wr_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 +	mi424wr_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
 +
 +	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 +	*IXP4XX_EXP_CS1 = MI424WR_CS1_CONFIG;
 +
 +	/* configure button as input
 +	 */
 +	gpio_line_config(MI424WR_BUTTON_GPIO, IXP4XX_GPIO_IN);
 +
 +	/* Initialize LEDs and enables PCI bus.
 +	 */
 +	iobase = ioremap_nocache(IXP4XX_EXP_BUS_BASE(1), 0x1000);
 +	__raw_writew(latch_value, iobase);
 +
 +	platform_add_devices(mi424wr_devices, ARRAY_SIZE(mi424wr_devices));
 +
 +	/* Need to figure out how to detect revD.
 +	 * Look for a revision argument sent by redboot.
 +	 */
 +#define revD 4
 +	if (system_rev == revD) {
 +		platform_device_register(&mi424wr_npeD_devices[0]);
 +		platform_device_register(&mi424wr_npeD_devices[1]);
 +	} else {
 +		platform_device_register(&mi424wr_npe_devices[0]);
 +		platform_device_register(&mi424wr_npe_devices[1]);
 +	}
 +}
 +
 +
 +MACHINE_START(MI424WR, "Actiontec MI424WR")
 +	/* Maintainer: Jose Vasconcellos */
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.init_time	= ixp4xx_timer_init,
 +	.atag_offset	= 0x0100,
 +	.init_machine	= mi424wr_init,
 +#if defined(CONFIG_PCI)
 +	.dma_zone_size	= SZ_64M,
 +#endif
 +	.restart	= ixp4xx_restart,
 +MACHINE_END
 +
--- a/target/linux/ixp4xx/patches-3.10/190-cambria_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/190-cambria_support.patch
--- a/target/linux/ixp4xx/patches-3.10/201-npe_driver_print_license_location.patch
+++ b/target/linux/ixp4xx/patches-3.10/201-npe_driver_print_license_location.patch
@ -1,11 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
 +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -586,6 +586,8 @@ int npe_load_firmware(struct npe *npe, c
 	npe_reset(npe);
 #endif
 +	print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
 +
 	print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
 		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
 		  (image->id >> 8) & 0xFF, image->id & 0xFF);
--- a/target/linux/ixp4xx/patches-3.10/203-npe_driver_mask_phy_features.patch
+++ b/target/linux/ixp4xx/patches-3.10/203-npe_driver_mask_phy_features.patch
@ -1,13 +0,0 @@
 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
 +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -1459,6 +1459,10 @@ static int eth_init_one(struct platform_
 		goto err_free_mem;
 	}
 +	/* mask with MAC supported features */
 +	port->phydev->supported &= PHY_BASIC_FEATURES;
 +	port->phydev->advertising = port->phydev->supported;
 +
 	port->phydev->irq = PHY_POLL;
 	if ((err = register_netdev(dev)))
--- a/target/linux/ixp4xx/patches-3.10/205-npe_driver_separate_phy_functions.patch
+++ b/target/linux/ixp4xx/patches-3.10/205-npe_driver_separate_phy_functions.patch
@ -1,131 +0,0 @@
 From e3eab80fb5d0a7d7fdb0f2f231b27161d5ec3804 Mon Sep 17 00:00:00 2001
 From: Jonas Gorski <jogo@openwrt.org>
 Date: Sun, 30 Jun 2013 15:52:53 +0200
 Subject: [PATCH 23/36] 205-npe_driver_separate_phy_functions.patch
 ---
 drivers/net/ethernet/xscale/ixp4xx_eth.c |   70 ++++++++++++++++++++++--------
 1 file changed, 51 insertions(+), 19 deletions(-)
 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
 +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -573,6 +573,51 @@ static void ixp4xx_adjust_link(struct ne
 	       dev->name, port->speed, port->duplex ? "full" : "half");
 }
 +static int ixp4xx_phy_connect(struct net_device *dev)
 +{
 +	struct port *port = netdev_priv(dev);
 +	struct eth_plat_info *plat = port->plat;
 +	char phy_id[MII_BUS_ID_SIZE + 3];
 +
 +	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
 +		mdio_bus->id, plat->phy);
 +	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
 +				   PHY_INTERFACE_MODE_MII);
 +	if (IS_ERR(port->phydev)) {
 +		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
 +		return PTR_ERR(port->phydev);
 +	}
 +
 +	/* mask with MAC supported features */
 +	port->phydev->supported &= PHY_BASIC_FEATURES;
 +	port->phydev->advertising = port->phydev->supported;
 +
 +	port->phydev->irq = PHY_POLL;
 +
 +	return 0;
 +}
 +
 +static void ixp4xx_phy_disconnect(struct net_device *dev)
 +{
 +	struct port *port = netdev_priv(dev);
 +
 +	phy_disconnect(port->phydev);
 +}
 +
 +static void ixp4xx_phy_start(struct net_device *dev)
 +{
 +	struct port *port = netdev_priv(dev);
 +
 +	port->speed = 0;	/* force "link up" message */
 +	phy_start(port->phydev);
 +}
 +
 +static void ixp4xx_phy_stop(struct net_device *dev)
 +{
 +	struct port *port = netdev_priv(dev);
 +
 +	phy_stop(port->phydev);
 +}
 static inline void debug_pkt(struct net_device *dev, const char *func,
 			     u8 *data, int len)
@@ -1239,8 +1284,7 @@ static int eth_open(struct net_device *d
 		return err;
 	}
 -	port->speed = 0;	/* force "link up" message */
 -	phy_start(port->phydev);
 +	ixp4xx_phy_start(dev);
 	for (i = 0; i < ETH_ALEN; i++)
 		__raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
@@ -1361,7 +1405,7 @@ static int eth_close(struct net_device *
 		printk(KERN_CRIT "%s: unable to disable loopback\n",
 		       dev->name);
 -	phy_stop(port->phydev);
 +	ixp4xx_phy_stop(dev);
 	if (!ports_open)
 		qmgr_disable_irq(TXDONE_QUEUE);
@@ -1387,7 +1431,6 @@ static int eth_init_one(struct platform_
 	struct net_device *dev;
 	struct eth_plat_info *plat = pdev->dev.platform_data;
 	u32 regs_phys;
 -	char phy_id[MII_BUS_ID_SIZE + 3];
 	int err;
 	if (ptp_filter_init(ptp_filter, ARRAY_SIZE(ptp_filter))) {
@@ -1450,20 +1493,9 @@ static int eth_init_one(struct platform_
 	__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
 	udelay(50);
 -	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
 -		mdio_bus->id, plat->phy);
 -	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
 -				   PHY_INTERFACE_MODE_MII);
 -	if (IS_ERR(port->phydev)) {
 -		err = PTR_ERR(port->phydev);
 +	err = ixp4xx_phy_connect(dev);
 +	if (err)
 		goto err_free_mem;
 -	}
 -
 -	/* mask with MAC supported features */
 -	port->phydev->supported &= PHY_BASIC_FEATURES;
 -	port->phydev->advertising = port->phydev->supported;
 -
 -	port->phydev->irq = PHY_POLL;
 	if ((err = register_netdev(dev)))
 		goto err_phy_dis;
@@ -1474,7 +1506,7 @@ static int eth_init_one(struct platform_
 	return 0;
 err_phy_dis:
 -	phy_disconnect(port->phydev);
 +	ixp4xx_phy_disconnect(dev);
 err_free_mem:
 	npe_port_tab[NPE_ID(port->id)] = NULL;
 	platform_set_drvdata(pdev, NULL);
@@ -1492,7 +1524,7 @@ static int eth_remove_one(struct platfor
 	struct port *port = netdev_priv(dev);
 	unregister_netdev(dev);
 -	phy_disconnect(port->phydev);
 +	ixp4xx_phy_disconnect(dev);
 	npe_port_tab[NPE_ID(port->id)] = NULL;
 	platform_set_drvdata(pdev, NULL);
 	npe_release(port->npe);
--- a/target/linux/ixp4xx/patches-3.10/206-npe_driver_add_update_link_function.patch
+++ b/target/linux/ixp4xx/patches-3.10/206-npe_driver_add_update_link_function.patch
@ -1,98 +0,0 @@
 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
 +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -177,7 +177,7 @@ struct port {
 	struct desc *desc_tab;	/* coherent */
 	u32 desc_tab_phys;
 	int id;			/* logical port ID */
 -	int speed, duplex;
 +	int link, speed, duplex;
 	u8 firmware[4];
 	int hwts_tx_en;
 	int hwts_rx_en;
@@ -542,37 +542,52 @@ static void ixp4xx_mdio_remove(void)
 	mdiobus_free(mdio_bus);
 }
 -
 -static void ixp4xx_adjust_link(struct net_device *dev)
 +static void ixp4xx_update_link(struct net_device *dev)
 {
 	struct port *port = netdev_priv(dev);
 -	struct phy_device *phydev = port->phydev;
 -	if (!phydev->link) {
 -		if (port->speed) {
 -			port->speed = 0;
 -			printk(KERN_INFO "%s: link down\n", dev->name);
 -		}
 +	if (!port->link) {
 +		netif_carrier_off(dev);
 +		printk(KERN_INFO "%s: link down\n", dev->name);
 		return;
 	}
 -	if (port->speed == phydev->speed && port->duplex == phydev->duplex)
 -		return;
 -
 -	port->speed = phydev->speed;
 -	port->duplex = phydev->duplex;
 -
 -	if (port->duplex)
 +	if (port->duplex == DUPLEX_FULL)
 		__raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
 			     &port->regs->tx_control[0]);
 	else
 		__raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
 			     &port->regs->tx_control[0]);
 +	netif_carrier_on(dev);
 	printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
 	       dev->name, port->speed, port->duplex ? "full" : "half");
 }
 +static void ixp4xx_adjust_link(struct net_device *dev)
 +{
 +	struct port *port = netdev_priv(dev);
 +	struct phy_device *phydev = port->phydev;
 +	int status_change = 0;
 +
 +	if (phydev->link) {
 +		if (port->duplex != phydev->duplex
 +		    || port->speed != phydev->speed) {
 +			status_change = 1;
 +		}
 +	}
 +
 +	if (phydev->link != port->link)
 +		status_change = 1;
 +
 +	port->link = phydev->link;
 +	port->speed = phydev->speed;
 +	port->duplex = phydev->duplex;
 +
 +	if (status_change)
 +		ixp4xx_update_link(dev);
 +}
 +
 static int ixp4xx_phy_connect(struct net_device *dev)
 {
 	struct port *port = netdev_priv(dev);
@@ -608,7 +623,6 @@ static void ixp4xx_phy_start(struct net_
 {
 	struct port *port = netdev_priv(dev);
 -	port->speed = 0;	/* force "link up" message */
 	phy_start(port->phydev);
 }
@@ -1500,6 +1514,10 @@ static int eth_init_one(struct platform_
 	if ((err = register_netdev(dev)))
 		goto err_phy_dis;
 +	port->link = 0;
 +	port->speed = 0;
 +	port->duplex = -1;
 +
 	printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
 	       npe_name(port->npe));
--- a/target/linux/ixp4xx/patches-3.10/207-npe_driver_multiphy_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/207-npe_driver_multiphy_support.patch
@ -1,154 +0,0 @@
 TODO: take care of additional PHYs through the PHY abstraction layer
 --- a/arch/arm/mach-ixp4xx/include/mach/platform.h
 +++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -72,7 +72,7 @@ extern unsigned long ixp4xx_exp_bus_size
 /*
  * Clock Speed Definitions.
  */
 -#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */ 
 +#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */
 #define IXP4XX_UART_XTAL        	14745600
 /*
@@ -93,12 +93,23 @@ struct ixp4xx_pata_data {
 #define IXP4XX_ETH_NPEB		0x10
 #define IXP4XX_ETH_NPEC		0x20
 +#define IXP4XX_ETH_PHY_MAX_ADDR	32
 +
 /* Information about built-in Ethernet MAC interfaces */
 struct eth_plat_info {
 	u8 phy;		/* MII PHY ID, 0 - 31 */
 	u8 rxq;		/* configurable, currently 0 - 31 only */
 	u8 txreadyq;
 	u8 hwaddr[6];
 +
 +	u32 phy_mask;
 +#if 0
 +	int speed;
 +	int duplex;
 +#else
 +	int speed_10;
 +	int half_duplex;
 +#endif
 };
 /* Information about built-in HSS (synchronous serial) interfaces */
 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
 +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -594,6 +594,37 @@ static int ixp4xx_phy_connect(struct net
 	struct eth_plat_info *plat = port->plat;
 	char phy_id[MII_BUS_ID_SIZE + 3];
 +	if (plat->phy == IXP4XX_ETH_PHY_MAX_ADDR) {
 +#if 0
 +		switch (plat->speed) {
 +		case SPEED_10:
 +		case SPEED_100:
 +			break;
 +		default:
 +			printk(KERN_ERR "%s: invalid speed (%d)\n",
 +					dev->name, plat->speed);
 +			return -EINVAL;
 +		}
 +
 +		switch (plat->duplex) {
 +		case DUPLEX_HALF:
 +		case DUPLEX_FULL:
 +			break;
 +		default:
 +			printk(KERN_ERR "%s: invalid duplex mode (%d)\n",
 +					dev->name, plat->duplex);
 +			return -EINVAL;
 +		}
 +		port->speed = plat->speed;
 +		port->duplex = plat->duplex;
 +#else
 +		port->speed = plat->speed_10 ? SPEED_10 : SPEED_100;
 +		port->duplex = plat->half_duplex ? DUPLEX_HALF : DUPLEX_FULL;
 +#endif
 +
 +		return 0;
 +	}
 +
 	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
 		mdio_bus->id, plat->phy);
 	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
@@ -616,21 +647,32 @@ static void ixp4xx_phy_disconnect(struct
 {
 	struct port *port = netdev_priv(dev);
 -	phy_disconnect(port->phydev);
 +	if (port->phydev)
 +		phy_disconnect(port->phydev);
 }
 static void ixp4xx_phy_start(struct net_device *dev)
 {
 	struct port *port = netdev_priv(dev);
 -	phy_start(port->phydev);
 +	if (port->phydev) {
 +		phy_start(port->phydev);
 +	} else {
 +		port->link = 1;
 +		ixp4xx_update_link(dev);
 +	}
 }
 static void ixp4xx_phy_stop(struct net_device *dev)
 {
 	struct port *port = netdev_priv(dev);
 -	phy_stop(port->phydev);
 +	if (port->phydev) {
 +		phy_stop(port->phydev);
 +	} else {
 +		port->link = 0;
 +		ixp4xx_update_link(dev);
 +	}
 }
 static inline void debug_pkt(struct net_device *dev, const char *func,
@@ -1028,6 +1070,9 @@ static int eth_ioctl(struct net_device *
 	if (cpu_is_ixp46x() && cmd == SIOCSHWTSTAMP)
 		return hwtstamp_ioctl(dev, req, cmd);
 +	if (!port->phydev)
 +		return -EOPNOTSUPP;
 +
 	return phy_mii_ioctl(port->phydev, req, cmd);
 }
@@ -1048,18 +1093,30 @@ static void ixp4xx_get_drvinfo(struct ne
 static int ixp4xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct port *port = netdev_priv(dev);
 +
 +	if (!port->phydev)
 +		return -EOPNOTSUPP;
 +
 	return phy_ethtool_gset(port->phydev, cmd);
 }
 static int ixp4xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct port *port = netdev_priv(dev);
 +
 +	if (!port->phydev)
 +		return -EOPNOTSUPP;
 +
 	return phy_ethtool_sset(port->phydev, cmd);
 }
 static int ixp4xx_nway_reset(struct net_device *dev)
 {
 	struct port *port = netdev_priv(dev);
 +
 +	if (!port->phydev)
 +		return -EOPNOTSUPP;
 +
 	return phy_start_aneg(port->phydev);
 }
--- a/target/linux/ixp4xx/patches-3.10/295-latch_led_driver.patch
+++ b/target/linux/ixp4xx/patches-3.10/295-latch_led_driver.patch
@ -1,201 +0,0 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
@@ -239,6 +239,12 @@ config LEDS_LP8788
 	help
 	  This option enables support for the Keyboard LEDs on the LP8788 PMIC.
 +config LEDS_LATCH
 +	tristate "LED Support for Memory Latched LEDs"
 +	depends on LEDS_CLASS
 +	help
 +		-- To Do --
 +
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook"
 	depends on LEDS_CLASS
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunf
 obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
 obj-$(CONFIG_LEDS_GPIO_REGISTER)	+= leds-gpio-register.o
 obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
 +obj-$(CONFIG_LEDS_LATCH)		+= leds-latch.o
 obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
 obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
 obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
 --- /dev/null
 +++ b/drivers/leds/leds-latch.c
@@ -0,0 +1,152 @@
 +/*
 + * LEDs driver for Memory Latched Devices
 + *
 + * Copyright (C) 2008 Gateworks Corp.
 + * Chris Lang <clang@gateworks.com>
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + *
 + */
 +#include <linux/kernel.h>
 +#include <linux/slab.h>
 +#include <linux/init.h>
 +#include <linux/platform_device.h>
 +#include <linux/leds.h>
 +#include <linux/workqueue.h>
 +#include <asm/io.h>
 +#include <linux/spinlock.h>
 +#include <linux/slab.h>
 +#include <linux/module.h>
 +#include <linux/export.h>
 +
 +static unsigned int mem_keep = 0xFF;
 +static spinlock_t mem_lock;
 +static unsigned char *iobase;
 +
 +struct latch_led_data {
 +	struct led_classdev cdev;
 +	struct work_struct work;
 +	u8 new_level;
 +	u8 bit;
 +	void (*set_led)(u8 bit, enum led_brightness value);
 +};
 +
 +static void latch_set_led(u8 bit, enum led_brightness value)
 +{
 +	if (value == LED_OFF)
 +		mem_keep |= (0x1 << bit);
 +	else
 +		mem_keep &= ~(0x1 << bit);
 +
 +	writeb(mem_keep, iobase);
 +}
 +
 +static void latch_led_set(struct led_classdev *led_cdev,
 +	enum led_brightness value)
 +{
 +	struct latch_led_data *led_dat =
 +		container_of(led_cdev, struct latch_led_data, cdev);
 +
 +	raw_spin_lock(mem_lock);
 +
 +	led_dat->set_led(led_dat->bit, value);
 +
 +	raw_spin_unlock(mem_lock);
 +}
 +
 +static int latch_led_probe(struct platform_device *pdev)
 +{
 +	struct latch_led_platform_data *pdata = pdev->dev.platform_data;
 +	struct latch_led *cur_led;
 +	struct latch_led_data *leds_data, *led_dat;
 +	int i, ret = 0;
 +
 +	if (!pdata)
 +		return -EBUSY;
 +
 +	leds_data = kzalloc(sizeof(struct latch_led_data) * pdata->num_leds,
 +				GFP_KERNEL);
 +	if (!leds_data)
 +		return -ENOMEM;
 +
 +	for (i = 0; i < pdata->num_leds; i++) {
 +		cur_led = &pdata->leds[i];
 +		led_dat = &leds_data[i];
 +
 +		led_dat->cdev.name = cur_led->name;
 +		led_dat->cdev.default_trigger = cur_led->default_trigger;
 +		led_dat->cdev.brightness_set = latch_led_set;
 +		led_dat->cdev.brightness = LED_OFF;
 +		led_dat->bit = cur_led->bit;
 +		led_dat->set_led = pdata->set_led ? pdata->set_led : latch_set_led;
 +
 +		ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
 +		if (ret < 0) {
 +			goto err;
 +		}
 +	}
 +
 +	if (!pdata->set_led) {
 +		iobase = ioremap_nocache(pdata->mem, 0x1000);
 +		writeb(0xFF, iobase);
 +	}
 +	platform_set_drvdata(pdev, leds_data);
 +
 +	return 0;
 +
 +err:
 +	if (i > 0) {
 +		for (i = i - 1; i >= 0; i--) {
 +			led_classdev_unregister(&leds_data[i].cdev);
 +		}
 +	}
 +
 +	kfree(leds_data);
 +
 +	return ret;
 +}
 +
 +static int latch_led_remove(struct platform_device *pdev)
 +{
 +	int i;
 +	struct latch_led_platform_data *pdata = pdev->dev.platform_data;
 +	struct latch_led_data *leds_data;
 +
 +	leds_data = platform_get_drvdata(pdev);
 +
 +	for (i = 0; i < pdata->num_leds; i++) {
 +		led_classdev_unregister(&leds_data[i].cdev);
 +		cancel_work_sync(&leds_data[i].work);
 +	}
 +
 +	kfree(leds_data);
 +
 +	return 0;
 +}
 +
 +static struct platform_driver latch_led_driver = {
 +	.probe		= latch_led_probe,
 +	.remove		= latch_led_remove,
 +	.driver		= {
 +		.name	= "leds-latch",
 +		.owner	= THIS_MODULE,
 +	},
 +};
 +
 +static int __init latch_led_init(void)
 +{
 +	return platform_driver_register(&latch_led_driver);
 +}
 +
 +static void __exit latch_led_exit(void)
 +{
 +	platform_driver_unregister(&latch_led_driver);
 +}
 +
 +module_init(latch_led_init);
 +module_exit(latch_led_exit);
 +
 +MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
 +MODULE_DESCRIPTION("Latch LED driver");
 --- a/include/linux/leds.h
 +++ b/include/linux/leds.h
@@ -285,4 +285,18 @@ static inline void ledtrig_cpu(enum cpu_
 }
 #endif
 +/* For the leds-latch driver */
 +struct latch_led {
 +	const char *name;
 +	char *default_trigger;
 +	unsigned  bit;
 +};
 +
 +struct latch_led_platform_data {
 +	int     num_leds;
 +	u32     mem;
 +	struct latch_led *leds;
 +	void	(*set_led)(u8 bit, enum led_brightness value);
 +};
 +
 #endif		/* __LINUX_LEDS_H_INCLUDED */
--- a/target/linux/ixp4xx/patches-3.10/300-avila_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/300-avila_support.patch
@ -1,726 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/avila-pci.c
 +++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -27,8 +27,8 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 -#define AVILA_MAX_DEV	4
 -#define LOFT_MAX_DEV	6
 +#define AVILA_MAX_DEV	6
 +
 #define IRQ_LINES	4
 /* PCI controller GPIO to IRQ pin mappings */
@@ -55,10 +55,8 @@ static int __init avila_map_irq(const st
 		IXP4XX_GPIO_IRQ(INTD)
 	};
 -	if (slot >= 1 &&
 -	    slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) &&
 -	    pin >= 1 && pin <= IRQ_LINES)
 -		return pci_irq_table[(slot + pin - 2) % 4];
 +	if (slot >= 1 && slot <= AVILA_MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
 +		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
 	return -1;
 }
 --- a/arch/arm/mach-ixp4xx/avila-setup.c
 +++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -14,9 +14,16 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/device.h>
 +#include <linux/if_ether.h>
 +#include <linux/socket.h>
 +#include <linux/netdevice.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 +#include <linux/i2c.h>
 +#include <linux/i2c/at24.h>
 +#include <linux/leds.h>
 +#include <linux/i2c/pca953x.h>
 #include <linux/i2c-gpio.h>
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -26,10 +33,25 @@
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 +#include <linux/irq.h>
 #define AVILA_SDA_PIN	7
 #define AVILA_SCL_PIN	6
 +/* User LEDs */
 +#define AVILA_GW23XX_LED_USER_GPIO     3
 +#define AVILA_GW23X7_LED_USER_GPIO     4
 +
 +/* gpio mask used by platform device */
 +#define AVILA_GPIO_MASK        (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7) | (1 << 9)
 +
 +struct avila_board_info {
 +	unsigned char	*model;
 +	void		(*setup)(void);
 +};
 +
 +static struct avila_board_info *avila_info __initdata;
 +
 static struct flash_platform_data avila_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
@@ -105,14 +127,69 @@ static struct platform_device avila_uart
 	.resource		= avila_uart_resources
 };
 -static struct resource avila_pata_resources[] = {
 +static struct resource avila_optional_uart_resources[] = {
 	{
 -		.flags	= IORESOURCE_MEM
 -	},
 +		.start  = 0x54000000,
 +		.end  = 0x54000fff,
 +		.flags  = IORESOURCE_MEM
 +	},{
 +		.start  = 0x55000000,
 +		.end  = 0x55000fff,
 +		.flags  = IORESOURCE_MEM
 +	},{
 +		.start  = 0x56000000,
 +		.end  = 0x56000fff,
 +		.flags  = IORESOURCE_MEM
 +	},{
 +		.start  = 0x57000000,
 +		.end  = 0x57000fff,
 +		.flags  = IORESOURCE_MEM
 +	}
 +};
 +
 +static struct plat_serial8250_port avila_optional_uart_data[] = {
 	{
 -		.flags	= IORESOURCE_MEM,
 +		.flags    = UPF_BOOT_AUTOCONF,
 +		.iotype   = UPIO_MEM,
 +		.regshift = 0,
 +		.uartclk  = 18432000,
 +		.rw_delay = 2,
 +	},{
 +		.flags    = UPF_BOOT_AUTOCONF,
 +		.iotype   = UPIO_MEM,
 +		.regshift = 0,
 +		.uartclk  = 18432000,
 +		.rw_delay = 2,
 +	},{
 +		.flags    = UPF_BOOT_AUTOCONF,
 +		.iotype   = UPIO_MEM,
 +		.regshift = 0,
 +		.uartclk  = 18432000,
 +		.rw_delay = 2,
 +	},{
 +		.flags    = UPF_BOOT_AUTOCONF,
 +		.iotype   = UPIO_MEM,
 +		.regshift = 0,
 +		.uartclk  = 18432000,
 +		.rw_delay = 2,
 	},
 +	{ }
 +};
 +
 +static struct platform_device avila_optional_uart = {
 +  .name   = "serial8250",
 +  .id   = PLAT8250_DEV_PLATFORM1,
 +  .dev.platform_data  = avila_optional_uart_data,
 +  .num_resources  = 4,
 +  .resource = avila_optional_uart_resources,
 +};
 +
 +static struct resource avila_pata_resources[] = {
 	{
 +		.flags	= IORESOURCE_MEM
 +	},{
 +		.flags	= IORESOURCE_MEM,
 +	},{
 		.name	= "intrq",
 		.start	= IRQ_IXP4XX_GPIO12,
 		.end	= IRQ_IXP4XX_GPIO12,
@@ -133,21 +210,237 @@ static struct platform_device avila_pata
 	.resource		= avila_pata_resources,
 };
 +/* Built-in 10/100 Ethernet MAC interfaces */
 +static struct eth_plat_info avila_npeb_data = {
 +	.phy		= 0,
 +	.rxq		= 3,
 +	.txreadyq	= 20,
 +};
 +
 +static struct eth_plat_info avila_npec_data = {
 +	.phy		= 1,
 +	.rxq		= 4,
 +	.txreadyq	= 21,
 +};
 +
 +static struct platform_device avila_npeb_device = {
 +	.name			= "ixp4xx_eth",
 +	.id			= IXP4XX_ETH_NPEB,
 +	.dev.platform_data	= &avila_npeb_data,
 +	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +};
 +
 +static struct platform_device avila_npec_device = {
 +	.name			= "ixp4xx_eth",
 +	.id			= IXP4XX_ETH_NPEC,
 +	.dev.platform_data	= &avila_npec_data,
 +	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +};
 +
 +static struct gpio_led avila_gpio_leds[] = {
 +	{
 +		.name		= "user",  /* green led */
 +		.gpio		= AVILA_GW23XX_LED_USER_GPIO,
 +		.active_low	= 1,
 +	},
 +	{
 +		.name		= "radio1",  /* green led */
 +		.gpio		= 104,
 +		.active_low	= 1,
 +	},
 +	{
 +		.name		= "radio2",  /* green led */
 +		.gpio		= 105,
 +		.active_low	= 1,
 +	},
 +	{
 +		.name		= "radio3",  /* green led */
 +		.gpio		= 106,
 +		.active_low	= 1,
 +	},
 +	{
 +		.name		= "radio4",  /* green led */
 +		.gpio		= 107,
 +		.active_low	= 1,
 +	},
 +
 +};
 +
 +static struct gpio_led_platform_data avila_gpio_leds_data = {
 +	.num_leds		= 1,
 +	.leds			= avila_gpio_leds,
 +};
 +
 +static struct platform_device avila_gpio_leds_device = {
 +	.name			= "leds-gpio",
 +	.id			= -1,
 +	.dev.platform_data	= &avila_gpio_leds_data,
 +};
 +
 +static struct latch_led avila_latch_leds[] = {
 +	{
 +		.name	= "led0",  /* green led */
 +		.bit	= 0,
 +	},
 +	{
 +		.name	= "led1",  /* green led */
 +		.bit	= 1,
 +	},
 +	{
 +		.name	= "led2",  /* green led */
 +		.bit	= 2,
 +	},
 +	{
 +		.name	= "led3",  /* green led */
 +		.bit	= 3,
 +	},
 +	{
 +		.name	= "led4",  /* green led */
 +		.bit	= 4,
 +	},
 +	{
 +		.name	= "led5",  /* green led */
 +		.bit	= 5,
 +	},
 +	{
 +		.name	= "led6",  /* green led */
 +		.bit	= 6,
 +	},
 +	{
 +		.name	= "led7",  /* green led */
 +		.bit	= 7,
 +	}
 +};
 +
 +static struct latch_led_platform_data avila_latch_leds_data = {
 +	.num_leds	= 8,
 +	.leds		= avila_latch_leds,
 +	.mem		= 0x51000000,
 +};
 +
 +static struct platform_device avila_latch_leds_device = {
 +	.name			= "leds-latch",
 +	.id			= -1,
 +	.dev.platform_data	= &avila_latch_leds_data,
 +};
 +
 static struct platform_device *avila_devices[] __initdata = {
 	&avila_i2c_gpio,
 -	&avila_flash,
 	&avila_uart
 };
 -static void __init avila_init(void)
 +/*
 + * Audio Devices
 + */
 +
 +static struct platform_device avila_hss_device[] = {
 +	{
 +		.name = "gw_avila_hss",
 +		.id = 0,
 +	},{
 +		.name = "gw_avila_hss",
 +		.id = 1,
 +	},{
 +		.name = "gw_avila_hss",
 +		.id = 2,
 +	},{
 +		.name = "gw_avila_hss",
 +		.id = 3,
 +	},
 +};
 +
 +static struct platform_device avila_pcm_device[] = {
 +	{
 +		.name = "gw_avila-audio",
 +		.id = 0,
 +	},{
 +		.name = "gw_avila-audio",
 +		.id = 1,
 +	},{
 +		.name = "gw_avila-audio",
 +		.id = 2,
 +	},{
 +		.name = "gw_avila-audio",
 +		.id = 3,
 +	}
 +};
 +
 +static void setup_audio_devices(void) {
 +	platform_device_register(&avila_hss_device[0]);
 +	platform_device_register(&avila_hss_device[1]);
 +	platform_device_register(&avila_hss_device[2]);
 +	platform_device_register(&avila_hss_device[3]);
 +
 +	platform_device_register(&avila_pcm_device[0]);
 +	platform_device_register(&avila_pcm_device[1]);
 +	platform_device_register(&avila_pcm_device[2]);
 +	platform_device_register(&avila_pcm_device[3]);
 +}
 +
 +static void __init avila_gw23xx_setup(void)
 {
 -	ixp4xx_sys_init();
 +	platform_device_register(&avila_npeb_device);
 +	platform_device_register(&avila_npec_device);
 -	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 -	avila_flash_resource.end =
 -		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 +	platform_device_register(&avila_gpio_leds_device);
 +}
 -	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
 +static void __init avila_gw2342_setup(void)
 +{
 +	platform_device_register(&avila_npeb_device);
 +	platform_device_register(&avila_npec_device);
 +
 +	platform_device_register(&avila_gpio_leds_device);
 +
 +	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
 +	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
 +
 +	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
 +	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
 +
 +	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
 +	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
 +
 +	platform_device_register(&avila_pata);
 +}
 +
 +static void __init avila_gw2345_setup(void)
 +{
 +	avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
 +	avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
 +	platform_device_register(&avila_npeb_device);
 +
 +	avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
 +	platform_device_register(&avila_npec_device);
 +
 +	platform_device_register(&avila_gpio_leds_device);
 +
 +	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
 +	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
 +
 +	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
 +	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
 +
 +	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
 +	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
 +
 +	platform_device_register(&avila_pata);
 +}
 +
 +static void __init avila_gw2347_setup(void)
 +{
 +	platform_device_register(&avila_npeb_device);
 +
 +	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
 +	platform_device_register(&avila_gpio_leds_device);
 +}
 +
 +static void __init avila_gw2348_setup(void)
 +{
 +	platform_device_register(&avila_npeb_device);
 +	platform_device_register(&avila_npec_device);
 +
 +	platform_device_register(&avila_gpio_leds_device);
 	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
 	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
@@ -159,8 +452,335 @@ static void __init avila_init(void)
 	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
 	platform_device_register(&avila_pata);
 +}
 +
 +static void __init avila_gw2353_setup(void)
 +{
 +	platform_device_register(&avila_npeb_device);
 +	platform_device_register(&avila_gpio_leds_device);
 +}
 +
 +static void __init avila_gw2355_setup(void)
 +{
 +	avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
 +	avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
 +	platform_device_register(&avila_npeb_device);
 +
 +	avila_npec_data.phy = 16;
 +	platform_device_register(&avila_npec_device);
 +
 +	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
 +	platform_device_register(&avila_gpio_leds_device);
 +
 +	*IXP4XX_EXP_CS4 |= 0xbfff3c03;
 +	avila_latch_leds[0].name = "RXD";
 +	avila_latch_leds[1].name = "TXD";
 +	avila_latch_leds[2].name = "POL";
 +	avila_latch_leds[3].name = "LNK";
 +	avila_latch_leds[4].name = "ERR";
 +	avila_latch_leds_data.num_leds = 5;
 +	avila_latch_leds_data.mem = 0x54000000;
 +	platform_device_register(&avila_latch_leds_device);
 +
 +	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
 +	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
 +
 +	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
 +	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
 +
 +	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
 +	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
 +
 +	platform_device_register(&avila_pata);
 +}
 +
 +static void __init avila_gw2357_setup(void)
 +{
 +	platform_device_register(&avila_npeb_device);
 +
 +	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
 +	platform_device_register(&avila_gpio_leds_device);
 +
 +	*IXP4XX_EXP_CS1 |= 0xbfff3c03;
 +	platform_device_register(&avila_latch_leds_device);
 +}
 +
 +static void __init avila_gw2365_setup(void)
 +{
 +	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 +
 +	*IXP4XX_EXP_CS4 = 0xBFFF3C43;
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_EDGE_RISING);
 +	avila_optional_uart_data[0].mapbase = 0x54000000;
 +	avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x54000000, 0x0fff);
 +	avila_optional_uart_data[0].irq   = IRQ_IXP4XX_GPIO0;
 +
 +	*IXP4XX_EXP_CS5 = 0xBFFF3C43;
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_EDGE_RISING);
 +	avila_optional_uart_data[1].mapbase = 0x55000000;
 +	avila_optional_uart_data[1].membase = (void __iomem *)ioremap(0x55000000, 0x0fff);
 +	avila_optional_uart_data[1].irq   = IRQ_IXP4XX_GPIO1;
 +
 +	*IXP4XX_EXP_CS6 = 0xBFFF3C43;
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
 +	avila_optional_uart_data[2].mapbase = 0x56000000;
 +	avila_optional_uart_data[2].membase = (void __iomem *)ioremap(0x56000000, 0x0fff);
 +	avila_optional_uart_data[2].irq   = IRQ_IXP4XX_GPIO2;
 +
 +	*IXP4XX_EXP_CS7 = 0xBFFF3C43;
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
 +	avila_optional_uart_data[3].mapbase = 0x57000000;
 +	avila_optional_uart_data[3].membase = (void __iomem *)ioremap(0x57000000, 0x0fff);
 +	avila_optional_uart_data[3].irq   = IRQ_IXP4XX_GPIO3;
 +
 +	platform_device_register(&avila_optional_uart);
 +
 +	avila_npeb_data.phy = 1;
 +	platform_device_register(&avila_npeb_device);
 +
 +	avila_npec_data.phy = 2;
 +	platform_device_register(&avila_npec_device);
 +
 +	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
 +	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
 +
 +	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
 +	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
 +
 +	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
 +	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
 +
 +	platform_device_register(&avila_pata);
 +
 +	avila_gpio_leds[0].gpio = 109;
 +	avila_gpio_leds_data.num_leds = 5;
 +	platform_device_register(&avila_gpio_leds_device);
 +
 +	setup_audio_devices();
 +}
 +
 +static void __init avila_gw2369_setup(void)
 +{
 +	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 +
 +	avila_npeb_data.phy = 1;
 +	platform_device_register(&avila_npeb_device);
 +
 +	avila_npec_data.phy = 2;
 +	platform_device_register(&avila_npec_device);
 +
 +	setup_audio_devices();
 +}
 +
 +static void __init avila_gw2370_setup(void)
 +{
 +	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 +
 +	avila_npeb_data.phy = 5;
 +	platform_device_register(&avila_npeb_device);
 +
 +	avila_npec_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
 +	avila_npec_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
 +	platform_device_register(&avila_npec_device);
 +
 +	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
 +	avila_optional_uart_data[0].mapbase = 0x52000000;
 +	avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
 +	avila_optional_uart_data[0].irq   = IRQ_IXP4XX_GPIO2;
 +
 +	*IXP4XX_EXP_CS3 = 0xBFFF3C43;
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
 +	avila_optional_uart_data[1].mapbase = 0x53000000;
 +	avila_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53000000, 0x0fff);
 +	avila_optional_uart_data[1].irq   = IRQ_IXP4XX_GPIO3;
 +
 +	avila_optional_uart.num_resources = 2;
 +
 +	platform_device_register(&avila_optional_uart);
 +
 +	avila_gpio_leds[0].gpio = 101;
 +	platform_device_register(&avila_gpio_leds_device);
 +
 +	setup_audio_devices();
 +}
 +
 +static void __init avila_gw2375_setup(void)
 +{
 +	avila_npeb_data.phy = 1;
 +	platform_device_register(&avila_npeb_device);
 +
 +	avila_npec_data.phy = 2;
 +	platform_device_register(&avila_npec_device);
 +
 +	*IXP4XX_EXP_CS2 = 0xBFFF3C43;
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
 +	avila_optional_uart_data[0].mapbase = 0x52000000;
 +	avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
 +	avila_optional_uart_data[0].irq   = IRQ_IXP4XX_GPIO10;
 +
 +	avila_optional_uart.num_resources = 1;
 +
 +	platform_device_register(&avila_optional_uart);
 +
 +	setup_audio_devices();
 +}
 +
 +
 +static struct avila_board_info avila_boards[] __initdata = {
 +	{
 +		.model		= "GW2342",
 +		.setup		= avila_gw2342_setup,
 +	}, {
 +		.model		= "GW2345",
 +		.setup		= avila_gw2345_setup,
 +	}, {
 +		.model		= "GW2347",
 +		.setup		= avila_gw2347_setup,
 +	}, {
 +		.model		= "GW2348",
 +		.setup		= avila_gw2348_setup,
 +	}, {
 +		.model		= "GW2353",
 +		.setup		= avila_gw2353_setup,
 +	}, {
 +		.model		= "GW2355",
 +		.setup		= avila_gw2355_setup,
 +	}, {
 +		.model		= "GW2357",
 +		.setup		= avila_gw2357_setup,
 +	}, {
 +		.model		= "GW2365",
 +		.setup		= avila_gw2365_setup,
 +	}, {
 +		.model		= "GW2369",
 +		.setup		= avila_gw2369_setup,
 +	}, {
 +		.model		= "GW2370",
 +		.setup		= avila_gw2370_setup,
 +	}, {
 +		.model		= "GW2373",
 +		.setup		= avila_gw2369_setup,
 +	}, {
 +		.model		= "GW2375",
 +		.setup		= avila_gw2375_setup,
 +	}
 +};
 +
 +static struct avila_board_info * __init avila_find_board_info(char *model)
 +{
 +	int i;
 +	model[6] = '\0';
 +
 +	for (i = 0; i < ARRAY_SIZE(avila_boards); i++) {
 +		struct avila_board_info *info = &avila_boards[i];
 +		if (strcmp(info->model, model) == 0)
 +			return info;
 +	}
 +
 +	return NULL;
 +}
 +
 +static struct memory_accessor *at24_mem_acc;
 +
 +static void at24_setup(struct memory_accessor *mem_acc, void *context)
 +{
 +	char mac_addr[ETH_ALEN];
 +	char model[7];
 +
 +	at24_mem_acc = mem_acc;
 +
 +	/* Read MAC addresses */
 +	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
 +		memcpy(&avila_npeb_data.hwaddr, mac_addr, ETH_ALEN);
 +	}
 +	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
 +		memcpy(&avila_npec_data.hwaddr, mac_addr, ETH_ALEN);
 +	}
 +
 +	/* Read the first 6 bytes of the model number */
 +	if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
 +		avila_info = avila_find_board_info(model);
 +	}
 +
 +}
 +
 +static struct at24_platform_data avila_eeprom_info = {
 +	.byte_len	= 1024,
 +	.page_size	= 16,
 +//	.flags		= AT24_FLAG_READONLY,
 +	.setup		= at24_setup,
 +};
 +
 +static struct pca953x_platform_data avila_pca_data = {
 +	.gpio_base  = 100,
 +};
 +
 +static struct i2c_board_info __initdata avila_i2c_board_info[] = {
 +	{
 +		I2C_BOARD_INFO("ds1672", 0x68),
 +	},
 +	{
 +		I2C_BOARD_INFO("gsp", 0x29),
 +	},
 +	{
 +		I2C_BOARD_INFO("pca9555", 0x23),
 +		.platform_data = &avila_pca_data,
 +	},
 +	{
 +		I2C_BOARD_INFO("ad7418", 0x28),
 +	},
 +	{
 +		I2C_BOARD_INFO("24c08", 0x51),
 +		.platform_data	= &avila_eeprom_info
 +	},
 +	{
 +		I2C_BOARD_INFO("tlv320aic33", 0x1b),
 +	},
 +	{
 +		I2C_BOARD_INFO("tlv320aic33", 0x1a),
 +	},
 +	{
 +		I2C_BOARD_INFO("tlv320aic33", 0x19),
 +	},
 +	{
 +		I2C_BOARD_INFO("tlv320aic33", 0x18),
 +	},
 +};
 +
 +static void __init avila_init(void)
 +{
 +	ixp4xx_sys_init();
 +
 +	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
 +
 +	i2c_register_board_info(0, avila_i2c_board_info,
 +			ARRAY_SIZE(avila_i2c_board_info));
 +}
 +
 +static int __init avila_model_setup(void)
 +{
 +	if (!machine_is_avila())
 +		return 0;
 +
 +	/* default 16MB flash */
 +	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 +	avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
 +
 +	if (avila_info) {
 +		printk(KERN_DEBUG "Running on Gateworks Avila %s\n",
 +							avila_info->model);
 +		avila_info->setup();
 +	} else {
 +		printk(KERN_INFO "Unknown/missing Avila model number"
 +						" -- defaults will be used\n");
 +		avila_gw23xx_setup();
 +	}
 +	platform_device_register(&avila_flash);
 +	return 0;
 }
 +late_initcall(avila_model_setup);
 MACHINE_START(AVILA, "Gateworks Avila Network Platform")
 	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
--- a/target/linux/ixp4xx/patches-3.10/304-ixp4xx_eth_jumboframe.patch
+++ b/target/linux/ixp4xx/patches-3.10/304-ixp4xx_eth_jumboframe.patch
@ -1,80 +0,0 @@
 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
 +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -57,7 +57,7 @@
 #define POOL_ALLOC_SIZE		(sizeof(struct desc) * (RX_DESCS + TX_DESCS))
 #define REGS_SIZE		0x1000
 -#define MAX_MRU			1536 /* 0x600 */
 +#define MAX_MRU			(14320 - ETH_HLEN - ETH_FCS_LEN)
 #define RX_BUFF_SIZE		ALIGN((NET_IP_ALIGN) + MAX_MRU, 4)
 #define NAPI_WEIGHT		16
@@ -1295,6 +1295,32 @@ static void destroy_queues(struct port *
 	}
 }
 +static int eth_do_change_mtu(struct net_device *dev, int mtu)
 +{
 +	struct port *port;
 +	struct msg msg;
 +	/* adjust for ethernet headers */
 +	int framesize = mtu + ETH_HLEN + ETH_FCS_LEN;
 +
 +	port = netdev_priv(dev);
 +
 +	memset(&msg, 0, sizeof(msg));
 +	msg.cmd = NPE_SETMAXFRAMELENGTHS;
 +	msg.eth_id = port->id;
 +
 +	/* max rx/tx 64 byte blocks */
 +	msg.byte2 = ((framesize + 63) / 64) << 8;
 +	msg.byte3 = ((framesize + 63) / 64) << 8;
 +
 +	msg.byte4 = msg.byte6 = framesize >> 8;
 +	msg.byte5 = msg.byte7 = framesize & 0xff;
 +
 +	if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAX_FRAME_LENGTH"))
 +		return -EIO;
 +
 +	return 0;
 +}
 +
 static int eth_open(struct net_device *dev)
 {
 	struct port *port = netdev_priv(dev);
@@ -1346,6 +1372,8 @@ static int eth_open(struct net_device *d
 	if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
 		return -EIO;
 +	eth_do_change_mtu(dev, dev->mtu);
 +
 	if ((err = request_queues(port)) != 0)
 		return err;
@@ -1485,7 +1513,26 @@ static int eth_close(struct net_device *
 	return 0;
 }
 +static int ixp_eth_change_mtu(struct net_device *dev, int mtu)
 +{
 +	int ret;
 +
 +	if (mtu > MAX_MRU)
 +		return -EINVAL;
 +
 +	if (dev->flags & IFF_UP) {
 +		ret = eth_do_change_mtu(dev, mtu);
 +		if (ret < 0)
 +			return ret;
 +	}
 +
 +	dev->mtu = mtu;
 +
 +	return 0;
 +}
 +
 static const struct net_device_ops ixp4xx_netdev_ops = {
 +	.ndo_change_mtu = ixp_eth_change_mtu,
 	.ndo_open = eth_open,
 	.ndo_stop = eth_close,
 	.ndo_start_xmit = eth_xmit,
--- a/target/linux/ixp4xx/patches-3.10/310-gtwx5717_spi_bus.patch
+++ b/target/linux/ixp4xx/patches-3.10/310-gtwx5717_spi_bus.patch
@ -1,52 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
 +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -27,6 +27,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 +#include <linux/spi/spi_gpio_old.h>
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -146,9 +147,41 @@ static struct platform_device gtwx5715_f
 	.resource	= &gtwx5715_flash_resource,
 };
 +static int gtwx5715_spi_boardinfo_setup(struct spi_board_info *bi,
 +		struct spi_master *master, void *data)
 +{
 +
 +	strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
 +
 +	bi->max_speed_hz = 5000000 /* Hz */;
 +	bi->bus_num = master->bus_num;
 +	bi->mode = SPI_MODE_0;
 +
 +	return 0;
 +}
 +
 +static struct spi_gpio_platform_data gtwx5715_spi_bus_data = {
 +	.pin_cs			= GTWX5715_KSSPI_SELECT,
 +	.pin_clk		= GTWX5715_KSSPI_CLOCK,
 +	.pin_miso		= GTWX5715_KSSPI_RXD,
 +	.pin_mosi		= GTWX5715_KSSPI_TXD,
 +	.cs_activelow		= 1,
 +	.no_spi_delay		= 1,
 +	.boardinfo_setup	= gtwx5715_spi_boardinfo_setup,
 +};
 +
 +static struct platform_device gtwx5715_spi_bus = {
 +	.name		= "spi-gpio",
 +	.id		= 0,
 +	.dev		= {
 +		.platform_data = &gtwx5715_spi_bus_data,
 +	},
 +};
 +
 static struct platform_device *gtwx5715_devices[] __initdata = {
 	&gtwx5715_uart_device,
 	&gtwx5715_flash,
 +	&gtwx5715_spi_bus,
 };
 static void __init gtwx5715_init(void)
--- a/target/linux/ixp4xx/patches-3.10/311-gtwx5717_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-3.10/311-gtwx5717_mac_plat_info.patch
@ -1,50 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
 +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -28,6 +28,7 @@
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/spi/spi_gpio_old.h>
 +#include <linux/dma-mapping.h>
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -178,10 +179,39 @@ static struct platform_device gtwx5715_s
 	},
 };
 +static struct eth_plat_info gtwx5715_npeb_data = {
 +	.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
 +	.phy_mask	= 0x1e, /* ports 1-4 of the KS8995 switch */
 +	.rxq		= 3,
 +	.txreadyq	= 20,
 +};
 +
 +static struct eth_plat_info gtwx5715_npec_data = {
 +	.phy		= 5,	/* port 5 of the KS8995 switch */
 +	.rxq		= 4,
 +	.txreadyq	= 21,
 +};
 +
 +static struct platform_device gtwx5715_npeb_device = {
 +	.name			= "ixp4xx_eth",
 +	.id			= IXP4XX_ETH_NPEB,
 +	.dev.platform_data	= &gtwx5715_npeb_data,
 +	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +};
 +
 +static struct platform_device gtwx5715_npec_device = {
 +	.name			= "ixp4xx_eth",
 +	.id			= IXP4XX_ETH_NPEC,
 +	.dev.platform_data	= &gtwx5715_npec_data,
 +	.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +};
 +
 static struct platform_device *gtwx5715_devices[] __initdata = {
 	&gtwx5715_uart_device,
 	&gtwx5715_flash,
 	&gtwx5715_spi_bus,
 +	&gtwx5715_npeb_device,
 +	&gtwx5715_npec_device,
 };
 static void __init gtwx5715_init(void)
--- a/target/linux/ixp4xx/patches-3.10/312-ixp4xx_pata_optimization.patch
+++ b/target/linux/ixp4xx/patches-3.10/312-ixp4xx_pata_optimization.patch
@ -1,137 +0,0 @@
 --- a/drivers/ata/pata_ixp4xx_cf.c
 +++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -24,16 +24,58 @@
 #include <scsi/scsi_host.h>
 #define DRV_NAME	"pata_ixp4xx_cf"
 -#define DRV_VERSION	"0.2"
 +#define DRV_VERSION	"0.3"
 static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
 {
 +	struct ixp4xx_pata_data *data = link->ap->host->dev->platform_data;
 +	unsigned int pio_mask;
 	struct ata_device *dev;
 	ata_for_each_dev(dev, link, ENABLED) {
 -		ata_dev_info(dev, "configured for PIO0\n");
 -		dev->pio_mode = XFER_PIO_0;
 -		dev->xfer_mode = XFER_PIO_0;
 +		if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)) {
 +			pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
 +			if (pio_mask & (1 << 1)) {
 +				pio_mask = 4;
 +			} else {
 +				pio_mask = 3;
 +			}
 +		} else {
 +			pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
 +		}
 +
 +		switch (pio_mask){
 +			case 0:
 +				ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
 +				dev->pio_mode = XFER_PIO_0;
 +				dev->xfer_mode = XFER_PIO_0;
 +				*data->cs0_cfg = 0x8a473c03;
 +				break;
 +			case 1:
 +				ata_dev_printk(dev, KERN_INFO, "configured for PIO1\n");
 +				dev->pio_mode = XFER_PIO_1;
 +				dev->xfer_mode = XFER_PIO_1;
 +				*data->cs0_cfg = 0x86433c03;
 +				break;
 +			case 2:
 +				ata_dev_printk(dev, KERN_INFO, "configured for PIO2\n");
 +				dev->pio_mode = XFER_PIO_2;
 +				dev->xfer_mode = XFER_PIO_2;
 +				*data->cs0_cfg = 0x82413c03;
 +				break;
 +			case 3:
 +				ata_dev_printk(dev, KERN_INFO, "configured for PIO3\n");
 +				dev->pio_mode = XFER_PIO_3;
 +				dev->xfer_mode = XFER_PIO_3;
 +				*data->cs0_cfg = 0x80823c03;
 +				break;
 +			case 4:
 +				ata_dev_printk(dev, KERN_INFO, "configured for PIO4\n");
 +				dev->pio_mode = XFER_PIO_4;
 +				dev->xfer_mode = XFER_PIO_4;
 +				*data->cs0_cfg = 0x80403c03;
 +				break;
 +		}
 		dev->xfer_shift = ATA_SHIFT_PIO;
 		dev->flags |= ATA_DFLAG_PIO;
 	}
@@ -46,6 +88,7 @@ static unsigned int ixp4xx_mmio_data_xfe
 	unsigned int i;
 	unsigned int words = buflen >> 1;
 	u16 *buf16 = (u16 *) buf;
 +	unsigned int pio_mask;
 	struct ata_port *ap = dev->link->ap;
 	void __iomem *mmio = ap->ioaddr.data_addr;
 	struct ixp4xx_pata_data *data = ap->host->dev->platform_data;
@@ -53,8 +96,34 @@ static unsigned int ixp4xx_mmio_data_xfe
 	/* set the expansion bus in 16bit mode and restore
 	 * 8 bit mode after the transaction.
 	 */
 -	*data->cs0_cfg &= ~(0x01);
 -	udelay(100);
 +	if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)){
 +		pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
 +		if (pio_mask & (1 << 1)){
 +			pio_mask = 4;
 +		}else{
 +			pio_mask = 3;
 +		}
 +	}else{
 +		pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
 +	}
 +	switch (pio_mask){
 +		case 0:
 +			*data->cs0_cfg = 0xa9643c42;
 +		break;
 +		case 1:
 +			*data->cs0_cfg = 0x85033c42;
 +		break;
 +		case 2:
 +			*data->cs0_cfg = 0x80b23c42;
 +		break;
 +		case 3:
 +			*data->cs0_cfg = 0x80823c42;
 +		break;
 +		case 4:
 +			*data->cs0_cfg = 0x80403c42;
 +		break;
 +	}
 +	udelay(5);
 	/* Transfer multiple of 2 bytes */
 	if (rw == READ)
@@ -79,8 +148,24 @@ static unsigned int ixp4xx_mmio_data_xfe
 		words++;
 	}
 -	udelay(100);
 -	*data->cs0_cfg |= 0x01;
 +	udelay(5);
 +	switch (pio_mask){
 +		case 0:
 +			*data->cs0_cfg = 0x8a473c03;
 +		break;
 +		case 1:
 +			*data->cs0_cfg = 0x86433c03;
 +		break;
 +		case 2:
 +			*data->cs0_cfg = 0x82413c03;
 +		break;
 +		case 3:
 +			*data->cs0_cfg = 0x80823c03;
 +		break;
 +		case 4:
 +			*data->cs0_cfg = 0x80403c03;
 +		break;
 +	}
 	return words << 1;
 }
--- a/target/linux/ixp4xx/patches-3.10/500-usr8200_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/500-usr8200_support.patch
@ -1,347 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -97,6 +97,14 @@ config MACH_SIDEWINDER
 	  Engineering Sidewinder board. For more information on this
 	  platform, see http://www.adiengineering.com
 +config MACH_USR8200
 +	bool "USRobotics USR8200"
 +	select PCI
 +	help
 +	  Say 'Y' here if you want your kernel to support the USRobotics
 +	  USR8200 router board. For more information on this platform, see
 +	  http://openwrt.org
 +
 config MACH_COMPEXWP18
 	bool "Compex WP18 / NP18A"
 	select PCI
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
@@ -27,6 +27,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt
 obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
 obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
 obj-pci-$(CONFIG_MACH_MI424WR)		+= mi424wr-pci.o
 +obj-pci-$(CONFIG_MACH_USR8200)		+= usr8200-pci.o
 obj-y	+= common.o
@@ -55,6 +56,7 @@ obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv
 obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
 obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
 obj-$(CONFIG_MACH_MI424WR)	+= mi424wr-setup.o
 +obj-$(CONFIG_MACH_USR8200)	+= usr8200-setup.o
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
 +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -44,7 +44,8 @@ static __inline__ void __arch_decomp_set
 	    machine_is_gateway7001() || machine_is_wg302v2() ||
 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
 -	    machine_is_wrt300nv2() || machine_is_tw5334())
 +	    machine_is_wrt300nv2() || machine_is_tw5334() ||
 +	    machine_is_usr8200())
 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
 	else
 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/usr8200-pci.c
@@ -0,0 +1,77 @@
 +/*
 + * arch/arch/mach-ixp4xx/usr8200-pci.c
 + *
 + * PCI setup routines for USRobotics USR8200
 + *
 + * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
 + *
 + * based on pronghorn-pci.c
 + * 	Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 + * based on coyote-pci.c:
 + *	Copyright (C) 2002 Jungo Software Technologies.
 + *	Copyright (C) 2003 MontaVista Softwrae, Inc.
 + *
 + * Maintainer: Peter Denison <openwrt@marshadder.org>
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + *
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/pci.h>
 +#include <linux/init.h>
 +#include <linux/irq.h>
 +
 +#include <asm/mach-types.h>
 +#include <mach/hardware.h>
 +
 +#include <asm/mach/pci.h>
 +
 +void __init usr8200_pci_preinit(void)
 +{
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
 +
 +	ixp4xx_pci_preinit();
 +}
 +
 +static int __init usr8200_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 +{
 +	if (slot == 14)
 +		return IRQ_IXP4XX_GPIO7;
 +	else if (slot == 15)
 +		return IRQ_IXP4XX_GPIO8;
 +	else if (slot == 16) {
 +		if (pin == 1)
 +			return IRQ_IXP4XX_GPIO11;
 +		else if (pin == 2)
 +			return IRQ_IXP4XX_GPIO10;
 +		else if (pin == 3)
 +			return IRQ_IXP4XX_GPIO9;
 +		else
 +			return -1;
 +	} else
 +		return -1;
 +}
 +
 +struct hw_pci usr8200_pci __initdata = {
 +	.nr_controllers	= 1,
 +	.preinit	= usr8200_pci_preinit,
 +	.ops		= &ixp4xx_ops,
 +	.setup		= ixp4xx_setup,
 +	.map_irq	= usr8200_map_irq,
 +};
 +
 +int __init usr8200_pci_init(void)
 +{
 +	if (machine_is_usr8200())
 +		pci_common_init(&usr8200_pci);
 +	return 0;
 +}
 +
 +subsys_initcall(usr8200_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
@@ -0,0 +1,217 @@
 +/*
 + * arch/arm/mach-ixp4xx/usr8200-setup.c
 + *
 + * Board setup for the USRobotics USR8200
 + *
 + * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
 + *
 + * based on pronghorn-setup.c:
 + * 	Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 + * based on coyote-setup.c:
 + *      Copyright (C) 2003-2005 MontaVista Software, Inc.
 + *
 + * Author: Peter Denison <openwrt@marshadder.org>
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/init.h>
 +#include <linux/device.h>
 +#include <linux/serial.h>
 +#include <linux/tty.h>
 +#include <linux/serial_8250.h>
 +#include <linux/slab.h>
 +#include <linux/types.h>
 +#include <linux/memory.h>
 +#include <linux/i2c-gpio.h>
 +#include <linux/leds.h>
 +#include <linux/dma-mapping.h>
 +
 +#include <asm/setup.h>
 +#include <mach/hardware.h>
 +#include <asm/irq.h>
 +#include <asm/mach-types.h>
 +#include <asm/mach/arch.h>
 +#include <asm/mach/flash.h>
 +
 +static struct flash_platform_data usr8200_flash_data = {
 +	.map_name	= "cfi_probe",
 +	.width		= 2,
 +};
 +
 +static struct resource usr8200_flash_resource = {
 +	.flags		= IORESOURCE_MEM,
 +};
 +
 +static struct platform_device usr8200_flash = {
 +	.name		= "IXP4XX-Flash",
 +	.id		= 0,
 +	.dev		= {
 +		.platform_data	= &usr8200_flash_data,
 +	},
 +	.num_resources	= 1,
 +	.resource	= &usr8200_flash_resource,
 +};
 +
 +static struct resource usr8200_uart_resources [] = {
 +	{
 +		.start		= IXP4XX_UART2_BASE_PHYS,
 +		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 +		.flags		= IORESOURCE_MEM
 +	},
 +	{
 +		.start		= IXP4XX_UART1_BASE_PHYS,
 +		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
 +		.flags		= IORESOURCE_MEM
 +	}
 +};
 +
 +static struct plat_serial8250_port usr8200_uart_data[] = {
 +	{
 +		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART2,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{
 +		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART1,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{ },
 +};
 +
 +static struct platform_device usr8200_uart = {
 +	.name		= "serial8250",
 +	.id		= PLAT8250_DEV_PLATFORM,
 +	.dev		= {
 +		.platform_data	= usr8200_uart_data,
 +	},
 +	.num_resources	= 2,
 +	.resource	= usr8200_uart_resources,
 +};
 +
 +static struct gpio_led usr8200_led_pin[] = {
 +	{
 +		.name		= "usr8200:usb1",
 +		.gpio		= 0,
 +		.active_low	= 1,
 +	},
 +	{
 +		.name		= "usr8200:usb2",
 +		.gpio		= 1,
 +		.active_low	= 1,
 +	},
 +	{
 +		.name		= "usr8200:ieee1394",
 +		.gpio		= 2,
 +		.active_low	= 1,
 +	},
 +	{
 +		.name		= "usr8200:internal",
 +		.gpio		= 3,
 +		.active_low	= 1,
 +	},
 +	{
 +		.name		= "usr8200:power",
 +		.gpio		= 14,
 +	}
 +};
 +
 +static struct gpio_led_platform_data usr8200_led_data = {
 +	.num_leds		= ARRAY_SIZE(usr8200_led_pin),
 +	.leds			= usr8200_led_pin,
 +};
 +
 +static struct platform_device usr8200_led = {
 +	.name			= "leds-gpio",
 +	.id			= -1,
 +	.dev.platform_data	= &usr8200_led_data,
 +};
 +
 +static struct eth_plat_info usr8200_plat_eth[] = {
 +	{ /* NPEC - LAN with Marvell 88E6060 switch */
 +		.phy		= IXP4XX_ETH_PHY_MAX_ADDR,
 +		.phy_mask	= 0x0F0000,
 +		.rxq		= 4,
 +		.txreadyq	= 21,
 +	}, { /* NPEB - WAN */
 +		.phy		= 9,
 +		.rxq		= 3,
 +		.txreadyq	= 20,
 +	}
 +};
 +
 +static struct platform_device usr8200_eth[] = {
 +	{
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEC,
 +		.dev.platform_data	= usr8200_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}, {
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEB,
 +		.dev.platform_data	= usr8200_plat_eth + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 +static struct resource usr8200_rtc_resources = {
 +	.flags		= IORESOURCE_MEM
 +};
 +
 +static struct platform_device usr8200_rtc = {
 +	.name		= "rtc7301",
 +	.id		= 0,
 +	.num_resources	= 1,
 +	.resource	= &usr8200_rtc_resources,
 +};
 +
 +static struct platform_device *usr8200_devices[] __initdata = {
 +	&usr8200_flash,
 +	&usr8200_uart,
 +	&usr8200_led,
 +	&usr8200_eth[0],
 +	&usr8200_eth[1],
 +	&usr8200_rtc,
 +};
 +
 +static void __init usr8200_init(void)
 +{
 +	ixp4xx_sys_init();
 +
 +	usr8200_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 +	usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
 +
 +	usr8200_rtc_resources.start = IXP4XX_EXP_BUS_BASE(2);
 +	usr8200_rtc_resources.end = IXP4XX_EXP_BUS_BASE(2) + 0x01ff;
 +
 +	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 +	*IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
 +	                  IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
 +	*IXP4XX_GPIO_GPCLKR = 0x01100000;
 +
 +	/* configure button as input */
 +	gpio_line_config(12, IXP4XX_GPIO_IN);
 +
 +	platform_add_devices(usr8200_devices, ARRAY_SIZE(usr8200_devices));
 +}
 +
 +MACHINE_START(USR8200, "USRobotics USR8200")
 +	/* Maintainer: Peter Denison <openwrt@marshadder.org> */
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.init_time	= ixp4xx_timer_init,
 +	.atag_offset	= 0x0100,
 +	.init_machine	= usr8200_init,
 +#if defined(CONFIG_PCI)
 +	.dma_zone_size	= SZ_64M,
 +#endif
 +	.restart	= ixp4xx_restart,
 +MACHINE_END
--- a/target/linux/ixp4xx/patches-3.10/520-tw2662_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/520-tw2662_support.patch
@ -1,317 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -180,6 +180,15 @@ config ARCH_PRPMC1100
 	  PrPCM1100 Processor Mezanine Module. For more information on
 	  this platform, see <file:Documentation/arm/IXP4xx>.
 +config MACH_TW2662
 +        bool "Titan Wireless TW-266-2"
 +        select PCI
 +        help
 +          Say 'Y' here if you want your kernel to support the Titan
 +          Wireless TW266-2. For more information on this platform,
 +          see http://openwrt.org
 +
 +
 config MACH_TW5334
 	bool "Titan Wireless TW-533-4"
 	select PCI
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER)	+= sid
 obj-pci-$(CONFIG_MACH_COMPEXWP18)	+= ixdp425-pci.o
 obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
 obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
 +obj-pci-$(CONFIG_MACH_TW2662)		+= tw2662-pci.o
 obj-pci-$(CONFIG_MACH_TW5334)		+= tw5334-pci.o
 obj-pci-$(CONFIG_MACH_MI424WR)		+= mi424wr-pci.o
 obj-pci-$(CONFIG_MACH_USR8200)		+= usr8200-pci.o
@@ -54,6 +55,7 @@ obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewin
 obj-$(CONFIG_MACH_COMPEXWP18)	+= compex42x-setup.o
 obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
 obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
 +obj-$(CONFIG_MACH_TW2662)	+= tw2662-setup.o
 obj-$(CONFIG_MACH_TW5334)	+= tw5334-setup.o
 obj-$(CONFIG_MACH_MI424WR)	+= mi424wr-setup.o
 obj-$(CONFIG_MACH_USR8200)	+= usr8200-setup.o
 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
 +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -45,7 +45,7 @@ static __inline__ void __arch_decomp_set
 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
 	    machine_is_wrt300nv2() || machine_is_tw5334() ||
 -	    machine_is_usr8200())
 +	    machine_is_usr8200() || machine_is_tw2662())
 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
 	else
 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/tw2662-pci.c
@@ -0,0 +1,67 @@
 +/*
 + * arch/arm/mach-ixp4xx/tw2662-pci.c
 + *
 + * PCI setup routines for Tiran Wireless TW-266-2 platform
 + *
 + * Copyright (C) 2002 Jungo Software Technologies.
 + * Copyright (C) 2003 MontaVista Softwrae, Inc.
 + * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
 + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
 + *
 + * Maintainer: Deepak Saxena <dsaxena@mvista.com>
 + * Maintainer: Alexandros C. Couloumbis <alex@ozo.com>
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + *
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/pci.h>
 +#include <linux/init.h>
 +#include <linux/irq.h>
 +#include <asm/mach-types.h>
 +#include <mach/hardware.h>
 +#include <asm/irq.h>
 +#include <asm/mach/pci.h>
 +
 +#define SLOT0_DEVID	1
 +#define SLOT1_DEVID	3
 +
 +/* PCI controller GPIO to IRQ pin mappings */
 +#define SLOT0_INTA	11
 +#define SLOT1_INTA	9
 +
 +void __init tw2662_pci_preinit(void)
 +{
 +	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
 +	ixp4xx_pci_preinit();
 +}
 +
 +static int __init tw2662_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 +{
 +	if (slot == SLOT0_DEVID)
 +		return IXP4XX_GPIO_IRQ(SLOT0_INTA);
 +	else if (slot == SLOT1_DEVID)
 +		return IXP4XX_GPIO_IRQ(SLOT1_INTA);
 +	else return -1;
 +}
 +
 +struct hw_pci tw2662_pci __initdata = {
 +	.nr_controllers = 1,
 +	.preinit =        tw2662_pci_preinit,
 +	.ops =            &ixp4xx_ops,
 +	.setup =          ixp4xx_setup,
 +	.map_irq =        tw2662_map_irq,
 +};
 +
 +int __init tw2662_pci_init(void)
 +{
 +        if (machine_is_tw2662())
 +		pci_common_init(&tw2662_pci);
 +        return 0;
 +}
 +
 +subsys_initcall(tw2662_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
@@ -0,0 +1,197 @@
 +/*
 + * arch/arm/mach-ixp4xx/tw2662-setup.c
 + *
 + * Titan Wireless TW-266-2
 + *
 + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
 + * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
 + *
 + * based on ap1000-setup.c:
 + * 	Author: Imre Kaloz <Kaloz@openwrt.org>
 + */
 +
 +#include <linux/if_ether.h>
 +#include <linux/kernel.h>
 +#include <linux/init.h>
 +#include <linux/device.h>
 +#include <linux/serial.h>
 +#include <linux/tty.h>
 +#include <linux/serial_8250.h>
 +#include <linux/slab.h>
 +#include <linux/netdevice.h>
 +#include <linux/etherdevice.h>
 +#include <linux/platform_device.h>
 +
 +#include <asm/io.h>
 +#include <asm/types.h>
 +#include <asm/setup.h>
 +#include <asm/memory.h>
 +#include <mach/hardware.h>
 +#include <asm/mach-types.h>
 +#include <asm/irq.h>
 +#include <asm/mach/arch.h>
 +#include <asm/mach/flash.h>
 +
 +/* gpio mask used by platform device */
 +#define TW2662_GPIO_MASK        (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7)
 +
 +static struct flash_platform_data tw2662_flash_data = {
 +	.map_name	= "cfi_probe",
 +	.width		= 2,
 +};
 +
 +static struct resource tw2662_flash_resource = {
 +	.flags		= IORESOURCE_MEM,
 +};
 +
 +static struct platform_device tw2662_flash = {
 +	.name		= "IXP4XX-Flash",
 +	.id		= 0,
 +	.dev		= {
 +		.platform_data = &tw2662_flash_data,
 +	},
 +	.num_resources	= 1,
 +	.resource	= &tw2662_flash_resource,
 +};
 +
 +static struct resource tw2662_uart_resources[] = {
 +	{
 +		.start		= IXP4XX_UART1_BASE_PHYS,
 +		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
 +		.flags		= IORESOURCE_MEM
 +	},
 +	{
 +		.start		= IXP4XX_UART2_BASE_PHYS,
 +		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 +		.flags		= IORESOURCE_MEM
 +	}
 +};
 +
 +static struct plat_serial8250_port tw2662_uart_data[] = {
 +	{
 +		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART1,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{
 +		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART2,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{ },
 +};
 +
 +static struct platform_device tw2662_uart = {
 +	.name			= "serial8250",
 +	.id			= PLAT8250_DEV_PLATFORM,
 +	.dev.platform_data	= tw2662_uart_data,
 +	.num_resources		= 2,
 +	.resource		= tw2662_uart_resources
 +};
 +
 +/* Built-in 10/100 Ethernet MAC interfaces */
 +static struct eth_plat_info tw2662_plat_eth[] = {
 +        {
 +                .phy            = 3,
 +                .rxq            = 3,
 +                .txreadyq       = 20,
 +        }, {
 +                .phy            = 1,
 +                .rxq            = 4,
 +                .txreadyq       = 21,
 +        }
 +};
 +
 +static struct platform_device tw2662_eth[] = {
 +	{
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEB,
 +		.dev.platform_data	= tw2662_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}, {
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEC,
 +		.dev.platform_data	= tw2662_plat_eth + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 +
 +static struct platform_device *tw2662_devices[] __initdata = {
 +	&tw2662_flash,
 +	&tw2662_uart,
 +	&tw2662_eth[0],
 +	&tw2662_eth[1],
 +};
 +
 +static char tw2662_mem_fixup[] __initdata = "mem=64M ";
 +
 +static void __init tw2662_fixup(struct tag *tags, char **cmdline,
 +				struct meminfo *mi)
 +{
 +	struct tag *t = tags;
 +	char *p = *cmdline;
 +
 +	/* Find the end of the tags table, taking note of any cmdline tag. */
 +	for (; t->hdr.size; t = tag_next(t)) {
 +		if (t->hdr.tag == ATAG_CMDLINE) {
 +			p = t->u.cmdline.cmdline;
 +		}
 +	}
 +
 +	/* Overwrite the end of the table with a new cmdline tag. */
 +	t->hdr.tag = ATAG_CMDLINE;
 +	t->hdr.size = (sizeof (struct tag_header) +
 +		strlen(tw2662_mem_fixup) + strlen(p) + 1 + 4) >> 2;
 +	strlcpy(t->u.cmdline.cmdline, tw2662_mem_fixup, COMMAND_LINE_SIZE);
 +	strlcpy(t->u.cmdline.cmdline + strlen(tw2662_mem_fixup), p,
 +		COMMAND_LINE_SIZE - strlen(tw2662_mem_fixup));
 +
 +	/* Terminate the table. */
 +	t = tag_next(t);
 +	t->hdr.tag = ATAG_NONE;
 +	t->hdr.size = 0;
 +}
 +
 +static void __init tw2662_init(void)
 +{
 +	ixp4xx_sys_init();
 +
 +	tw2662_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 +	tw2662_flash_resource.end =
 +		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 +
 +	platform_add_devices(tw2662_devices, ARRAY_SIZE(tw2662_devices));
 +
 +	if (!(is_valid_ether_addr(tw2662_plat_eth[0].hwaddr)))
 +		random_ether_addr(tw2662_plat_eth[0].hwaddr);
 +	if (!(is_valid_ether_addr(tw2662_plat_eth[1].hwaddr))) {
 +		memcpy(tw2662_plat_eth[1].hwaddr, tw2662_plat_eth[0].hwaddr, ETH_ALEN);
 +		tw2662_plat_eth[1].hwaddr[5] = (tw2662_plat_eth[0].hwaddr[5] + 1);
 +	}
 +
 +}
 +
 +#ifdef CONFIG_MACH_TW2662
 +MACHINE_START(TW2662, "Titan Wireless TW-266-2")
 +	/* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */
 +	.fixup		= tw2662_fixup,
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.init_time	= ixp4xx_timer_init,
 +	.atag_offset	= 0x0100,
 +	.init_machine	= tw2662_init,
 +#if defined(CONFIG_PCI)
 +	.dma_zone_size	= SZ_64M,
 +#endif
 +	.restart	= ixp4xx_restart,
 +MACHINE_END
 +#endif
--- a/target/linux/ixp4xx/patches-3.10/530-ap42x_support.patch
+++ b/target/linux/ixp4xx/patches-3.10/530-ap42x_support.patch
@ -1,282 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -8,6 +8,14 @@ menu "Intel IXP4xx Implementation Option
 comment "IXP4xx Platforms"
 +config MACH_AP42X
 +	bool "Tonze AP-422/425"
 +	select PCI
 +	help
 +	  Say 'Y' here if you want your kernel to support Tonze's
 +	  AP-422/425 boards. For more information on this platform,
 +	  see http://tonze.com.tw
 +
 config MACH_NSLU2
 	bool
 	prompt "Linksys NSLU2"
 --- a/arch/arm/mach-ixp4xx/Makefile
 +++ b/arch/arm/mach-ixp4xx/Makefile
@@ -5,6 +5,7 @@
 obj-pci-y	:=
 obj-pci-n	:=
 +obj-pci-$(CONFIG_MACH_AP42X)		+= ap42x-pci.o
 obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
 obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
 obj-pci-$(CONFIG_MACH_CAMBRIA)		+= cambria-pci.o
@@ -32,6 +33,7 @@ obj-pci-$(CONFIG_MACH_USR8200)		+= usr82
 obj-y	+= common.o
 +obj-$(CONFIG_MACH_AP42X)	+= ap42x-setup.o
 obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
 obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
 obj-$(CONFIG_MACH_CAMBRIA)	+= cambria-setup.o
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/ap42x-pci.c
@@ -0,0 +1,63 @@
 +/*
 + * arch/arch/mach-ixp4xx/ap42x-pci.c
 + *
 + * PCI setup routines for Tonze AP-422/425
 + *
 + * Copyright (C) 2012 Imre Kaloz <kaloz@openwrt.org>
 + *
 + * based on coyote-pci.c:
 + *	Copyright (C) 2002 Jungo Software Technologies.
 + *	Copyright (C) 2003 MontaVista Softwrae, Inc.
 + *
 + * Maintainer: Imre Kaloz <kaloz@openwrt.org>
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + *
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/pci.h>
 +#include <linux/init.h>
 +#include <linux/irq.h>
 +
 +#include <asm/mach-types.h>
 +#include <mach/hardware.h>
 +
 +#include <asm/mach/pci.h>
 +
 +void __init ap42x_pci_preinit(void)
 +{
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
 +	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
 +
 +	ixp4xx_pci_preinit();
 +}
 +
 +static int __init ap42x_map_irq(const struct pci_dev *dev, u8 slot,
 +	u8 pin)
 +{
 +	if (slot == 1)
 +		return IRQ_IXP4XX_GPIO11;
 +	else if (slot == 2)
 +		return IRQ_IXP4XX_GPIO10;
 +	else return -1;
 +}
 +
 +struct hw_pci ap42x_pci __initdata = {
 +	.nr_controllers = 1,
 +	.preinit	= ap42x_pci_preinit,
 +	.ops		= &ixp4xx_ops,
 +	.setup		= ixp4xx_setup,
 +	.map_irq	= ap42x_map_irq,
 +};
 +
 +int __init ap42x_pci_init(void)
 +{
 +	if (machine_is_ap42x())
 +		pci_common_init(&ap42x_pci);
 +	return 0;
 +}
 +
 +subsys_initcall(ap42x_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/ap42x-setup.c
@@ -0,0 +1,166 @@
 +/*
 + * arch/arm/mach-ixp4xx/ap42x-setup.c
 + *
 + * Board setup for the Tonze AP-42x boards
 + *
 + * Copyright (C) 2012 Imre Kaloz <kaloz@openwrt.org>
 + *
 + * based on coyote-setup.c:
 + *      Copyright (C) 2003-2005 MontaVista Software, Inc.
 + *
 + * Author: Imre Kaloz <Kaloz@openwrt.org>
 + */
 +
 +#include <linux/kernel.h>
 +#include <linux/init.h>
 +#include <linux/device.h>
 +#include <linux/serial.h>
 +#include <linux/tty.h>
 +#include <linux/serial_8250.h>
 +#include <linux/mtd/physmap.h>
 +#include <linux/dma-mapping.h>
 +
 +#include <asm/types.h>
 +#include <asm/setup.h>
 +#include <asm/memory.h>
 +#include <mach/hardware.h>
 +#include <asm/irq.h>
 +#include <asm/mach-types.h>
 +#include <asm/mach/arch.h>
 +#include <asm/mach/flash.h>
 +
 +static struct mtd_partition ap42x_flash_partitions[] = {
 +	{
 +		.name		= "RedBoot",
 +		.offset		= 0x00000000,
 +		.size		= 0x00080000,
 +	}, {
 +		.name		= "linux",
 +		.offset		= 0x00080000,
 +		.size		= 0x00100000,
 +	}, {
 +		.name		= "rootfs",
 +		.offset		= 0x00180000,
 +		.size		= 0x00660000,
 +	}, {
 +		.name		= "FIS directory",
 +		.offset		= 0x007f8000,
 +		.size		= 0x00007000,
 +	}, {
 +		.name		= "RedBoot config",
 +		.offset		= 0x007ff000,
 +		.size		= 0x00001000,
 +	},
 +};
 +
 +static struct physmap_flash_data ap42x_flash_data = {
 +	.width		= 2,
 +	.parts		= ap42x_flash_partitions,
 +	.nr_parts	= ARRAY_SIZE(ap42x_flash_partitions),
 +};
 +
 +static struct resource ap42x_flash_resource = {
 +	.flags		= IORESOURCE_MEM,
 +	.start		= IXP4XX_EXP_BUS_BASE_PHYS,
 +	.end		= IXP4XX_EXP_BUS_BASE_PHYS + SZ_8M - 1,
 +};
 +
 +static struct platform_device ap42x_flash = {
 +	.name			= "physmap-flash",
 +	.id			= 0,
 +	.dev		= {
 +		.platform_data	= &ap42x_flash_data,
 +	},
 +	.num_resources		= 1,
 +	.resource		= &ap42x_flash_resource,
 +};
 +
 +static struct resource ap42x_uart_resource = {
 +	.start	= IXP4XX_UART2_BASE_PHYS,
 +	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 +	.flags	= IORESOURCE_MEM,
 +};
 +
 +static struct plat_serial8250_port ap42x_uart_data[] = {
 +	{
 +		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 +		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 +		.irq		= IRQ_IXP4XX_UART2,
 +		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 +		.iotype		= UPIO_MEM,
 +		.regshift	= 2,
 +		.uartclk	= IXP4XX_UART_XTAL,
 +	},
 +	{ },
 +};
 +
 +static struct platform_device ap42x_uart = {
 +	.name		= "serial8250",
 +	.id		= PLAT8250_DEV_PLATFORM,
 +	.dev			= {
 +		.platform_data	= ap42x_uart_data,
 +	},
 +	.num_resources	= 1,
 +	.resource	= &ap42x_uart_resource,
 +};
 +
 +static struct eth_plat_info ap42x_plat_eth[] = {
 +	{
 +		.phy		= 2,
 +		.rxq		= 3,
 +		.txreadyq	= 20,
 +	}, {
 +		.phy		= 1,
 +		.rxq		= 4,
 +		.txreadyq	= 21,
 +	}
 +};
 +
 +static struct platform_device ap42x_eth[] = {
 +	{
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEB,
 +		.dev.platform_data	= ap42x_plat_eth,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}, {
 +		.name			= "ixp4xx_eth",
 +		.id			= IXP4XX_ETH_NPEC,
 +		.dev.platform_data	= ap42x_plat_eth + 1,
 +		.dev.coherent_dma_mask	= DMA_BIT_MASK(32),
 +	}
 +};
 +
 +static struct platform_device *ap42x_devices[] __initdata = {
 +	&ap42x_flash,
 +	&ap42x_uart,
 +	&ap42x_eth[0],
 +	&ap42x_eth[1],
 +};
 +
 +static void __init ap42x_init(void)
 +{
 +	ixp4xx_sys_init();
 +
 +	ap42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 +	ap42x_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 +
 +	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 +	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
 +
 +	platform_add_devices(ap42x_devices, ARRAY_SIZE(ap42x_devices));
 +}
 +
 +#ifdef CONFIG_MACH_AP42X
 +MACHINE_START(AP42X, "Tonze AP-422/425")
 +	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
 +	.map_io		= ixp4xx_map_io,
 +	.init_irq	= ixp4xx_init_irq,
 +	.init_time	= ixp4xx_timer_init,
 +	.atag_offset	= 0x100,
 +	.init_machine	= ap42x_init,
 +#if defined(CONFIG_PCI)
 +	.dma_zone_size	= SZ_64M,
 +#endif
 +	.restart	= ixp4xx_restart,
 +MACHINE_END
 +#endif
 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
 +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -45,7 +45,8 @@ static __inline__ void __arch_decomp_set
 	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
 	    machine_is_pronghorn() || machine_is_pronghorn_metro() ||
 	    machine_is_wrt300nv2() || machine_is_tw5334() ||
 -	    machine_is_usr8200() || machine_is_tw2662())
 +	    machine_is_usr8200() || machine_is_tw2662() ||
 +	    machine_is_ap42x())
 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
 	else
 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
--- a/target/linux/ixp4xx/patches-3.10/600-skb_avoid_dmabounce.patch
+++ b/target/linux/ixp4xx/patches-3.10/600-skb_avoid_dmabounce.patch
@ -1,23 +0,0 @@
 --- a/net/core/skbuff.c
 +++ b/net/core/skbuff.c
@@ -210,6 +210,9 @@ struct sk_buff *__alloc_skb(unsigned int
 	if (sk_memalloc_socks() && (flags & SKB_ALLOC_RX))
 		gfp_mask |= __GFP_MEMALLOC;
 +#ifdef CONFIG_ARCH_IXP4XX
 +	gfp_mask |= GFP_DMA;
 +#endif
 	/* Get the HEAD */
 	skb = kmem_cache_alloc_node(cache, gfp_mask & ~__GFP_DMA, node);
@@ -1054,6 +1057,10 @@ int pskb_expand_head(struct sk_buff *skb
 	if (skb_shared(skb))
 		BUG();
 +#ifdef CONFIG_ARCH_IXP4XX
 +	gfp_mask |= GFP_DMA;
 +#endif
 +
 	size = SKB_DATA_ALIGN(size);
 	if (skb_pfmemalloc(skb))
--- a/target/linux/ixp4xx/patches-3.10/900-ixp4xx-crypto-include-module.h.patch
+++ b/target/linux/ixp4xx/patches-3.10/900-ixp4xx-crypto-include-module.h.patch
@ -1,10 +0,0 @@
 --- a/drivers/crypto/ixp4xx_crypto.c
 +++ b/drivers/crypto/ixp4xx_crypto.c
@@ -14,6 +14,7 @@
 #include <linux/dmapool.h>
 #include <linux/crypto.h>
 #include <linux/kernel.h>
 +#include <linux/module.h>
 #include <linux/rtnetlink.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
--- a/target/linux/ixp4xx/patches-3.10/910-ixp4xx-nr_irq_lines.patch
+++ b/target/linux/ixp4xx/patches-3.10/910-ixp4xx-nr_irq_lines.patch
@ -1,22 +0,0 @@
 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
 +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -53,7 +53,7 @@ static int __init ixdp425_map_irq(const
 	};
 	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
 -		return pci_irq_table[(slot + pin - 2) % 4];
 +		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
 	return -1;
 }
 --- a/arch/arm/mach-ixp4xx/miccpt-pci.c
 +++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
@@ -54,7 +54,7 @@ static int __init miccpt_map_irq(const s
 	};
 	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
 -		return pci_irq_table[(slot + pin - 2) % 4];
 +		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
 	return -1;
 }