n810: Fix USB board init

SVN-Revision: 22781
This commit is contained in:
Michael Büsch 2010-08-23 16:14:04 +00:00
parent e54b810ace
commit 0eb37951ed
2 changed files with 160 additions and 65 deletions

View file

@ -351,6 +351,7 @@ CONFIG_MTD_ONENAND_OTP=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set # CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
# CONFIG_MTD_ROOTFS_ROOT_DEV is not set # CONFIG_MTD_ROOTFS_ROOT_DEV is not set
# CONFIG_MTD_ROOTFS_SPLIT is not set # CONFIG_MTD_ROOTFS_SPLIT is not set
CONFIG_MUSB_PIO_ONLY=y
CONFIG_N810BM=y CONFIG_N810BM=y
CONFIG_NAMESPACES=y CONFIG_NAMESPACES=y
CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_DMA_MAP_STATE=y
@ -359,6 +360,7 @@ CONFIG_NETFILTER_XTABLES=y
# CONFIG_NET_NS is not set # CONFIG_NET_NS is not set
# CONFIG_NET_SCHED is not set # CONFIG_NET_SCHED is not set
CONFIG_NLS=y CONFIG_NLS=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_NO_HZ=y CONFIG_NO_HZ=y
CONFIG_OABI_COMPAT=y CONFIG_OABI_COMPAT=y
# CONFIG_OMAP2_DSS is not set # CONFIG_OMAP2_DSS is not set
@ -471,7 +473,7 @@ CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TREE_RCU=y CONFIG_TREE_RCU=y
CONFIG_TUN=m CONFIG_TUN=m
CONFIG_UID16=y CONFIG_UID16=y
CONFIG_USB=m CONFIG_USB=y
# CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_AUDIO is not set # CONFIG_USB_AUDIO is not set
# CONFIG_USB_CDC_COMPOSITE is not set # CONFIG_USB_CDC_COMPOSITE is not set
@ -487,7 +489,7 @@ CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_CI13XXX is not set # CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DUALSPEED is not set CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_GADGET_DUMMY_HCD is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_FSL_QE is not set # CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_FSL_USB2 is not set
@ -496,30 +498,36 @@ CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set CONFIG_USB_GADGET_MUSB_HDRC=y
# CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_NET2280 is not set
CONFIG_USB_GADGET_OMAP=y # CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set
CONFIG_USB_GADGET_SELECTED=y CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_VBUS_DRAW=50 CONFIG_USB_GADGET_VBUS_DRAW=100
# CONFIG_USB_G_HID is not set # CONFIG_USB_G_HID is not set
# CONFIG_USB_G_PRINTER is not set # CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_G_SERIAL is not set # CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_WEBCAM is not set # CONFIG_USB_G_WEBCAM is not set
# CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_MIDI_GADGET is not set
CONFIG_USB_MUSB_DEBUG=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_HDRC_HCD=y
# CONFIG_USB_MUSB_HOST is not set
CONFIG_USB_MUSB_OTG=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_OMAP1=y CONFIG_USB_OHCI_HCD_OMAP1=y
CONFIG_USB_OMAP=y
CONFIG_USB_OTG=y CONFIG_USB_OTG=y
CONFIG_USB_OTG_UTILS=y CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_PWC is not set # CONFIG_USB_PWC is not set
CONFIG_USB_SUPPORT=y CONFIG_USB_SUPPORT=y
CONFIG_USB_TUSB6010=y
# CONFIG_USB_ZERO is not set # CONFIG_USB_ZERO is not set
# CONFIG_USER_NS is not set # CONFIG_USER_NS is not set
CONFIG_V4L_USB_DRIVERS=y CONFIG_V4L_USB_DRIVERS=y

View file

@ -1,7 +1,16 @@
Index: linux-2.6.35/arch/arm/mach-omap1/board-nokia770.c ---
=================================================================== arch/arm/mach-omap1/board-nokia770.c | 16 +
--- linux-2.6.35.orig/arch/arm/mach-omap1/board-nokia770.c 2010-08-08 12:56:15.000000000 +0200 arch/arm/mach-omap2/Kconfig | 10 +
+++ linux-2.6.35/arch/arm/mach-omap1/board-nokia770.c 2010-08-08 12:56:30.000000000 +0200 arch/arm/mach-omap2/Makefile | 2
arch/arm/mach-omap2/board-n8x0-lcd.c | 127 +++++++++++++
arch/arm/mach-omap2/board-n8x0-usb.c | 175 +++++++++++++++++++
arch/arm/mach-omap2/board-n8x0.c | 319 +++++++++++++++++++++++++----------
arch/arm/mach-omap2/control.c | 2
arch/arm/mach-omap2/serial.c | 8
8 files changed, 569 insertions(+), 90 deletions(-)
--- linux-2.6.35.3.orig/arch/arm/mach-omap1/board-nokia770.c
+++ linux-2.6.35.3/arch/arm/mach-omap1/board-nokia770.c
@@ -37,6 +37,7 @@ @@ -37,6 +37,7 @@
#include <plat/lcd_mipid.h> #include <plat/lcd_mipid.h>
#include <plat/mmc.h> #include <plat/mmc.h>
@ -34,10 +43,8 @@ Index: linux-2.6.35/arch/arm/mach-omap1/board-nokia770.c
}; };
static void mipid_shutdown(struct mipid_platform_data *pdata) static void mipid_shutdown(struct mipid_platform_data *pdata)
Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c --- linux-2.6.35.3.orig/arch/arm/mach-omap2/board-n8x0.c
=================================================================== +++ linux-2.6.35.3/arch/arm/mach-omap2/board-n8x0.c
--- linux-2.6.35.orig/arch/arm/mach-omap2/board-n8x0.c 2010-08-08 12:56:15.000000000 +0200
+++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c 2010-08-08 12:56:30.000000000 +0200
@@ -18,8 +18,12 @@ @@ -18,8 +18,12 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/stddef.h> #include <linux/stddef.h>
@ -51,12 +58,15 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
@@ -32,6 +36,117 @@ @@ -32,114 +36,156 @@
#include <plat/onenand.h> #include <plat/onenand.h>
#include <plat/mmc.h> #include <plat/mmc.h>
#include <plat/serial.h> #include <plat/serial.h>
+#include <plat/cbus.h> +#include <plat/cbus.h>
+
-static int slot1_cover_open;
-static int slot2_cover_open;
-static struct device *mmc_device;
+#define RX51_TSC2005_RESET_GPIO 94 +#define RX51_TSC2005_RESET_GPIO 94
+#define RX51_TSC2005_IRQ_GPIO 106 +#define RX51_TSC2005_IRQ_GPIO 106
+#define OMAP_TAG_NOKIA_BT 0x4e01 +#define OMAP_TAG_NOKIA_BT 0x4e01
@ -112,14 +122,32 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
+ [0x53] = KEY_DOWN, + [0x53] = KEY_DOWN,
+ [0x55] = KEY_ENTER, + [0x55] = KEY_ENTER,
+ [0x5f] = KEY_ESC, + [0x5f] = KEY_ESC,
+
-#define TUSB6010_ASYNC_CS 1
-#define TUSB6010_SYNC_CS 4
-#define TUSB6010_GPIO_INT 58
-#define TUSB6010_GPIO_ENABLE 0
-#define TUSB6010_DMACHAN 0x3f
+ [0x61] = KEY_U, + [0x61] = KEY_U,
+ [0x64] = KEY_LEFT, + [0x64] = KEY_LEFT,
+
-#if defined(CONFIG_USB_TUSB6010) || \
- defined(CONFIG_USB_TUSB6010_MODULE)
-/*
- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
- * 1.5 V voltage regulators of PM companion chip. Companion chip will then
- * provide then PGOOD signal to TUSB6010 which will release it from reset.
- */
-static int tusb_set_power(int state)
-{
- int i, retval = 0;
+ [0x71] = KEY_I, + [0x71] = KEY_I,
+ [0x75] = KEY_KPENTER, + [0x75] = KEY_KPENTER,
+}; +};
+
- if (state) {
- gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
- msleep(1);
+static struct lm8323_platform_data lm8323_pdata = { +static struct lm8323_platform_data lm8323_pdata = {
+ .repeat = 0, /* Repeat is handled in userspace for now. */ + .repeat = 0, /* Repeat is handled in userspace for now. */
+ .keymap = rx44_keymap, + .keymap = rx44_keymap,
@ -134,7 +162,13 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
+ //.pwm1_name = "n810::keyboard", + //.pwm1_name = "n810::keyboard",
+ //.pwm2_name = "n810::cover", + //.pwm2_name = "n810::cover",
+}; +};
+
- /* Wait until TUSB6010 pulls INT pin down */
- i = 100;
- while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
- msleep(1);
- i--;
- }
+struct omap_bluetooth_config { +struct omap_bluetooth_config {
+ u8 chip_type; + u8 chip_type;
+ u8 bt_wakeup_gpio; + u8 bt_wakeup_gpio;
@ -144,7 +178,15 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
+ u8 bd_addr[6]; + u8 bd_addr[6];
+ u8 bt_sysclk; + u8 bt_sysclk;
+}; +};
+
- if (!i) {
- printk(KERN_ERR "tusb: powerup failed\n");
- retval = -ENODEV;
- }
- } else {
- gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
- msleep(10);
- }
+static struct platform_device n8x0_bt_device = { +static struct platform_device n8x0_bt_device = {
+ .name = "hci_h4p", + .name = "hci_h4p",
+ .id = -1, + .id = -1,
@ -154,42 +196,97 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
+void __init n8x0_bt_init(void) +void __init n8x0_bt_init(void)
+{ +{
+ const struct omap_bluetooth_config *bt_config; + const struct omap_bluetooth_config *bt_config;
+
- return retval;
+ bt_config = (void *) omap_get_config(OMAP_TAG_NOKIA_BT, + bt_config = (void *) omap_get_config(OMAP_TAG_NOKIA_BT,
+ struct omap_bluetooth_config); + struct omap_bluetooth_config);
+ n8x0_bt_device.dev.platform_data = (void *) bt_config; + n8x0_bt_device.dev.platform_data = (void *) bt_config;
+ if (platform_device_register(&n8x0_bt_device) < 0) + if (platform_device_register(&n8x0_bt_device) < 0)
+ BUG(); + BUG();
+} }
+
-static struct musb_hdrc_config musb_config = {
- .multipoint = 1,
- .dyn_fifo = 1,
- .num_eps = 16,
- .ram_bits = 12,
+static struct omap2_mcspi_device_config mipid_mcspi_config = { +static struct omap2_mcspi_device_config mipid_mcspi_config = {
+ .turbo_mode = 0, + .turbo_mode = 0,
+ .single_channel = 1, + .single_channel = 1,
+};
static int slot1_cover_open;
static int slot2_cover_open;
@@ -139,7 +254,34 @@ static struct omap2_mcspi_device_config
.single_channel = 1,
}; };
-static struct musb_hdrc_platform_data tusb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
- .mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
- .mode = MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
- .mode = MUSB_HOST,
-#endif
- .set_power = tusb_set_power,
- .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
- .power = 100, /* Max 100 mA VBUS for host mode */
- .config = &musb_config,
-};
-
-static void __init n8x0_usb_init(void)
-{
- int ret = 0;
- static char announce[] __initdata = KERN_INFO "TUSB 6010\n";
-
- /* PM companion chip power control pin */
- ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable");
- if (ret != 0) {
- printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
- TUSB6010_GPIO_ENABLE);
- return;
- }
- gpio_direction_output(TUSB6010_GPIO_ENABLE, 0);
-
- tusb_set_power(0);
+static int slot1_cover_open;
+static int slot2_cover_open;
+static struct device *mmc_device;
- ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
- TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
- TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
- if (ret != 0)
- goto err;
- printk(announce);
+static struct omap2_mcspi_device_config p54spi_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1,
+};
- return;
+#ifdef CONFIG_MACH_NOKIA_N8X0_LCD +#ifdef CONFIG_MACH_NOKIA_N8X0_LCD
+extern struct mipid_platform_data n8x0_mipid_platform_data; +extern struct mipid_platform_data n8x0_mipid_platform_data;
+#endif +#endif
+
-err:
- gpio_free(TUSB6010_GPIO_ENABLE);
+#ifdef CONFIG_TOUCHSCREEN_TSC2005 +#ifdef CONFIG_TOUCHSCREEN_TSC2005
+static struct tsc2005_platform_data tsc2005_config; +static struct tsc2005_platform_data tsc2005_config;
+static void rx51_tsc2005_set_reset(bool enable) +static void rx51_tsc2005_set_reset(bool enable)
+{ +{
+ gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); + gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
+} }
+ -#else
-
-static void __init n8x0_usb_init(void) {}
-
-#endif /*CONFIG_USB_TUSB6010 */
-
-static struct omap2_mcspi_device_config p54spi_mcspi_config = {
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = { +static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
+ .turbo_mode = 0, .turbo_mode = 0,
+ .single_channel = 1, .single_channel = 1,
+}; };
+#endif +#endif
+
static struct spi_board_info n800_spi_board_info[] __initdata = { static struct spi_board_info n800_spi_board_info[] __initdata = {
+#ifdef CONFIG_MACH_NOKIA_N8X0_LCD +#ifdef CONFIG_MACH_NOKIA_N8X0_LCD
+ { + {
@ -204,7 +301,7 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
{ {
.modalias = "p54spi", .modalias = "p54spi",
.bus_num = 2, .bus_num = 2,
@@ -147,6 +289,68 @@ static struct spi_board_info n800_spi_bo @@ -147,6 +193,68 @@ static struct spi_board_info n800_spi_bo
.max_speed_hz = 48000000, .max_speed_hz = 48000000,
.controller_data = &p54spi_mcspi_config, .controller_data = &p54spi_mcspi_config,
}, },
@ -273,7 +370,7 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
}; };
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
@@ -181,6 +385,20 @@ static struct mtd_partition onenand_part @@ -181,6 +289,20 @@ static struct mtd_partition onenand_part
}, },
}; };
@ -294,7 +391,7 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
static struct omap_onenand_platform_data board_onenand_data = { static struct omap_onenand_platform_data board_onenand_data = {
.cs = 0, .cs = 0,
.gpio_irq = 26, .gpio_irq = 26,
@@ -649,14 +867,37 @@ static void __init n8x0_init_irq(void) @@ -649,14 +771,39 @@ static void __init n8x0_init_irq(void)
omap_gpio_init(); omap_gpio_init();
} }
@ -305,6 +402,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
+#define n8x0_mipid_init() 0 +#define n8x0_mipid_init() 0
+#define n8x0_blizzard_init() 0 +#define n8x0_blizzard_init() 0
+#endif +#endif
+
+extern void n8x0_usb_init(void);
+ +
static void __init n8x0_init_machine(void) static void __init n8x0_init_machine(void)
{ {
@ -332,10 +431,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
n8x0_onenand_init(); n8x0_onenand_init();
n8x0_mmc_init(); n8x0_mmc_init();
n8x0_usb_init(); n8x0_usb_init();
Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-lcd.c --- /dev/null
=================================================================== +++ linux-2.6.35.3/arch/arm/mach-omap2/board-n8x0-lcd.c
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0-lcd.c 2010-08-08 12:56:31.000000000 +0200
@@ -0,0 +1,127 @@ @@ -0,0 +1,127 @@
+/* +/*
+ * linux/arch/arm/mach-omap2/board-n8x0.c + * linux/arch/arm/mach-omap2/board-n8x0.c
@ -464,10 +561,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-lcd.c
+ +
+ printk(KERN_INFO "N8x0 Blizzard initialized"); + printk(KERN_INFO "N8x0 Blizzard initialized");
+} +}
Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-usb.c --- /dev/null
=================================================================== +++ linux-2.6.35.3/arch/arm/mach-omap2/board-n8x0-usb.c
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0-usb.c 2010-08-08 12:56:31.000000000 +0200
@@ -0,0 +1,175 @@ @@ -0,0 +1,175 @@
+/* +/*
+ * linux/arch/arm/mach-omap2/board-n8x0-usb.c + * linux/arch/arm/mach-omap2/board-n8x0-usb.c
@ -644,10 +739,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-usb.c
+err: +err:
+ gpio_free(GPIO_TUSB_ENABLE); + gpio_free(GPIO_TUSB_ENABLE);
+} +}
Index: linux-2.6.35/arch/arm/mach-omap2/control.c --- linux-2.6.35.3.orig/arch/arm/mach-omap2/control.c
=================================================================== +++ linux-2.6.35.3/arch/arm/mach-omap2/control.c
--- linux-2.6.35.orig/arch/arm/mach-omap2/control.c 2010-08-08 12:56:15.000000000 +0200
+++ linux-2.6.35/arch/arm/mach-omap2/control.c 2010-08-08 12:56:32.000000000 +0200
@@ -162,6 +162,7 @@ u16 omap_ctrl_readw(u16 offset) @@ -162,6 +162,7 @@ u16 omap_ctrl_readw(u16 offset)
return __raw_readw(OMAP_CTRL_REGADDR(offset)); return __raw_readw(OMAP_CTRL_REGADDR(offset));
} }
@ -664,10 +757,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/control.c
void omap_ctrl_writel(u32 val, u16 offset) void omap_ctrl_writel(u32 val, u16 offset)
{ {
__raw_writel(val, OMAP_CTRL_REGADDR(offset)); __raw_writel(val, OMAP_CTRL_REGADDR(offset));
Index: linux-2.6.35/arch/arm/mach-omap2/Kconfig --- linux-2.6.35.3.orig/arch/arm/mach-omap2/Kconfig
=================================================================== +++ linux-2.6.35.3/arch/arm/mach-omap2/Kconfig
--- linux-2.6.35.orig/arch/arm/mach-omap2/Kconfig 2010-08-08 12:56:15.000000000 +0200
+++ linux-2.6.35/arch/arm/mach-omap2/Kconfig 2010-08-08 12:56:33.000000000 +0200
@@ -116,6 +116,16 @@ config MACH_NOKIA_N8X0 @@ -116,6 +116,16 @@ config MACH_NOKIA_N8X0
select MACH_NOKIA_N810 select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX select MACH_NOKIA_N810_WIMAX
@ -685,10 +776,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/Kconfig
config MACH_NOKIA_RX51 config MACH_NOKIA_RX51
bool "Nokia RX-51 board" bool "Nokia RX-51 board"
depends on ARCH_OMAP3 depends on ARCH_OMAP3
Index: linux-2.6.35/arch/arm/mach-omap2/Makefile --- linux-2.6.35.3.orig/arch/arm/mach-omap2/Makefile
=================================================================== +++ linux-2.6.35.3/arch/arm/mach-omap2/Makefile
--- linux-2.6.35.orig/arch/arm/mach-omap2/Makefile 2010-08-08 12:56:15.000000000 +0200
+++ linux-2.6.35/arch/arm/mach-omap2/Makefile 2010-08-08 12:56:33.000000000 +0200
@@ -116,6 +116,8 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += boar @@ -116,6 +116,8 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += boar
hsmmc.o \ hsmmc.o \
board-sdp-flash.o board-sdp-flash.o
@ -698,10 +787,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/Makefile
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-sdram.o \ board-rx51-sdram.o \
board-rx51-peripherals.o \ board-rx51-peripherals.o \
Index: linux-2.6.35/arch/arm/mach-omap2/serial.c --- linux-2.6.35.3.orig/arch/arm/mach-omap2/serial.c
=================================================================== +++ linux-2.6.35.3/arch/arm/mach-omap2/serial.c
--- linux-2.6.35.orig/arch/arm/mach-omap2/serial.c 2010-08-08 12:56:15.000000000 +0200
+++ linux-2.6.35/arch/arm/mach-omap2/serial.c 2010-08-08 12:56:34.000000000 +0200
@@ -495,10 +495,10 @@ static void omap_uart_idle_init(struct o @@ -495,10 +495,10 @@ static void omap_uart_idle_init(struct o
uart->padconf = 0; uart->padconf = 0;
} }