brcm47xx: use libgpio instaed of implementing the gpio interface ourself.

SVN-Revision: 32992
This commit is contained in:
Hauke Mehrtens 2012-08-04 19:46:25 +00:00
parent 3942aebedc
commit 0758996824
13 changed files with 810 additions and 377 deletions

View file

@ -156,9 +156,9 @@ static void __init bcm4780_init(void) {
/* Enables GPIO 3 that controls HDD and led power on ASUS WL-700gE */ /* Enables GPIO 3 that controls HDD and led power on ASUS WL-700gE */
printk(MODULE_NAME ": Spinning up HDD and enabling leds\n"); printk(MODULE_NAME ": Spinning up HDD and enabling leds\n");
gpio_outen(pin, pin); bcm47xx_gpio_outen(pin, pin);
gpio_control(pin, 0); bcm47xx_gpio_control(pin, 0);
gpio_out(pin, pin); bcm47xx_gpio_out(pin, pin);
/* Wait 5s, so the HDD can spin up */ /* Wait 5s, so the HDD can spin up */
set_current_state(TASK_INTERRUPTIBLE); set_current_state(TASK_INTERRUPTIBLE);
@ -168,14 +168,14 @@ static void __init bcm4780_init(void) {
static void __init NetCenter_init(void) { static void __init NetCenter_init(void) {
/* unset pin 6 (+12V) */ /* unset pin 6 (+12V) */
int pin = 1 << 6; int pin = 1 << 6;
gpio_outen(pin, pin); bcm47xx_gpio_outen(pin, pin);
gpio_control(pin, 0); bcm47xx_gpio_control(pin, 0);
gpio_out(pin, pin); bcm47xx_gpio_out(pin, pin);
/* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */ /* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */
pin = 1 << 1; pin = 1 << 1;
gpio_outen(pin, pin); bcm47xx_gpio_outen(pin, pin);
gpio_control(pin, 0); bcm47xx_gpio_control(pin, 0);
gpio_out(pin, pin); bcm47xx_gpio_out(pin, pin);
/* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */ /* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */
bcm4780_init(); bcm4780_init();
} }
@ -184,9 +184,9 @@ static void __init bcm57xx_init(void) {
int pin = 1 << 2; int pin = 1 << 2;
/* FIXME: switch comes up, but port mappings/vlans not right */ /* FIXME: switch comes up, but port mappings/vlans not right */
gpio_outen(pin, pin); bcm47xx_gpio_outen(pin, pin);
gpio_control(pin, 0); bcm47xx_gpio_control(pin, 0);
gpio_out(pin, pin); bcm47xx_gpio_out(pin, pin);
} }
static struct platform_t __initdata platforms[] = { static struct platform_t __initdata platforms[] = {
@ -1283,6 +1283,42 @@ static struct platform_t __init *platform_detect(void)
return NULL; return NULL;
} }
static inline void ssb_maskset32(struct ssb_device *dev,
u16 offset, u32 mask, u32 set)
{
ssb_write32(dev, offset, (ssb_read32(dev, offset) & mask) | set);
}
static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *))
{
int irq;
irq = gpio_to_irq(0);
if (irq == -EINVAL) return;
if (enabled) {
if (request_irq(irq, handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, "gpio", handler))
return;
} else {
free_irq(irq, handler);
}
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
if (bcm47xx_bus.ssb.chipco.dev)
ssb_maskset32(bcm47xx_bus.ssb.chipco.dev, SSB_CHIPCO_IRQMASK, ~SSB_CHIPCO_IRQ_GPIO, (enabled ? SSB_CHIPCO_IRQ_GPIO : 0));
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
if (bcm47xx_bus.bcma.bus.drv_cc.core)
bcma_maskset32(bcm47xx_bus.bcma.bus.drv_cc.core, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO, (enabled ? BCMA_CC_IRQ_GPIO : 0));
break;
#endif
}
}
static void register_buttons(struct button_t *b) static void register_buttons(struct button_t *b)
{ {
for (; b->name; b++) for (; b->name; b++)
@ -1290,18 +1326,18 @@ static void register_buttons(struct button_t *b)
platform.button_mask &= ~gpiomask; platform.button_mask &= ~gpiomask;
gpio_outen(platform.button_mask, 0); bcm47xx_gpio_outen(platform.button_mask, 0);
gpio_control(platform.button_mask, 0); bcm47xx_gpio_control(platform.button_mask, 0);
platform.button_polarity = gpio_in() & platform.button_mask; platform.button_polarity = bcm47xx_gpio_in(~0) & platform.button_mask;
gpio_intpolarity(platform.button_mask, platform.button_polarity); bcm47xx_gpio_polarity(platform.button_mask, platform.button_polarity);
gpio_setintmask(platform.button_mask, platform.button_mask); bcm47xx_gpio_intmask(platform.button_mask, platform.button_mask);
gpio_set_irqenable(1, button_handler); gpio_set_irqenable(1, button_handler);
} }
static void unregister_buttons(struct button_t *b) static void unregister_buttons(struct button_t *b)
{ {
gpio_setintmask(platform.button_mask, 0); bcm47xx_gpio_intmask(platform.button_mask, 0);
gpio_set_irqenable(0, button_handler); gpio_set_irqenable(0, button_handler);
} }
@ -1361,12 +1397,12 @@ static irqreturn_t button_handler(int irq, void *dev_id)
struct button_t *b; struct button_t *b;
u32 in, changed; u32 in, changed;
in = gpio_in() & platform.button_mask; in = bcm47xx_gpio_in(~0) & platform.button_mask;
gpio_intpolarity(platform.button_mask, in); bcm47xx_gpio_polarity(platform.button_mask, in);
changed = platform.button_polarity ^ in; changed = platform.button_polarity ^ in;
platform.button_polarity = in; platform.button_polarity = in;
changed &= ~gpio_outen(0, 0); changed &= ~bcm47xx_gpio_outen(0, 0);
for (b = platform.buttons; b->name; b++) { for (b = platform.buttons; b->name; b++) {
struct event_t *event; struct event_t *event;
@ -1422,10 +1458,10 @@ static void register_leds(struct led_t *l)
} }
} }
gpio_outen(mask, oe_mask); bcm47xx_gpio_outen(mask, oe_mask);
gpio_control(mask, 0); bcm47xx_gpio_control(mask, 0);
gpio_out(mask, val); bcm47xx_gpio_out(mask, val);
gpio_setintmask(mask, 0); bcm47xx_gpio_intmask(mask, 0);
} }
static void unregister_leds(struct led_t *l) static void unregister_leds(struct led_t *l)
@ -1438,7 +1474,11 @@ static void unregister_leds(struct led_t *l)
static void set_led_extif(struct led_t *led) static void set_led_extif(struct led_t *led)
{ {
gpio_set_extif(led->gpio, led->state); volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (led->gpio & ~GPIO_TYPE_MASK);
if (led->state)
*addr = 0xFF;
else
*addr;
} }
static void led_flash(unsigned long dummy) { static void led_flash(unsigned long dummy) {
@ -1460,11 +1500,11 @@ static void led_flash(unsigned long dummy) {
mask &= ~gpiomask; mask &= ~gpiomask;
if (mask) { if (mask) {
u32 val = ~gpio_in(); u32 val = ~bcm47xx_gpio_in(~0);
gpio_outen(mask, mask); bcm47xx_gpio_outen(mask, mask);
gpio_control(mask, 0); bcm47xx_gpio_control(mask, 0);
gpio_out(mask, val); bcm47xx_gpio_out(mask, val);
} }
if (mask || extif_blink) { if (mask || extif_blink) {
mod_timer(&led_timer, jiffies + FLASH_TIME); mod_timer(&led_timer, jiffies + FLASH_TIME);
@ -1491,7 +1531,7 @@ static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t
if (led->gpio & GPIO_TYPE_EXTIF) { if (led->gpio & GPIO_TYPE_EXTIF) {
len = sprintf(page, "%d\n", led->state); len = sprintf(page, "%d\n", led->state);
} else { } else {
u32 in = (gpio_in() & led->gpio ? 1 : 0); u32 in = (bcm47xx_gpio_in(~0) & led->gpio ? 1 : 0);
u8 p = (led->polarity == NORMAL ? 0 : 1); u8 p = (led->polarity == NORMAL ? 0 : 1);
len = sprintf(page, "%d\n", ((in ^ p) ? 1 : 0)); len = sprintf(page, "%d\n", ((in ^ p) ? 1 : 0));
} }
@ -1555,9 +1595,9 @@ static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count,
led->state = p ^ ((page[0] == '1') ? 1 : 0); led->state = p ^ ((page[0] == '1') ? 1 : 0);
set_led_extif(led); set_led_extif(led);
} else { } else {
gpio_outen(led->gpio, led->gpio); bcm47xx_gpio_outen(led->gpio, led->gpio);
gpio_control(led->gpio, 0); bcm47xx_gpio_control(led->gpio, 0);
gpio_out(led->gpio, ((p ^ (page[0] == '1')) ? led->gpio : 0)); bcm47xx_gpio_out(led->gpio, ((p ^ (page[0] == '1')) ? led->gpio : 0));
} }
} }
break; break;

View file

@ -6,150 +6,6 @@
#include <linux/gpio.h> #include <linux/gpio.h>
#include <bcm47xx.h> #include <bcm47xx.h>
static inline u32 gpio_in(void)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
return ssb_gpio_in(&bcm47xx_bus.ssb, ~0);
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc, ~0);
#endif
}
return -EINVAL;
}
static inline u32 gpio_out(u32 mask, u32 value)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
return ssb_gpio_out(&bcm47xx_bus.ssb, mask, value);
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
return bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
#endif
}
return -EINVAL;
}
static inline u32 gpio_outen(u32 mask, u32 value)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
ssb_gpio_outen(&bcm47xx_bus.ssb, mask, value);
return 0;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
return 0;
#endif
}
return -EINVAL;
}
static inline u32 gpio_control(u32 mask, u32 value)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
return ssb_gpio_control(&bcm47xx_bus.ssb, mask, value);
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
return bcma_chipco_gpio_control(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
#endif
}
return -EINVAL;
}
static inline u32 gpio_setintmask(u32 mask, u32 value)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
return ssb_gpio_intmask(&bcm47xx_bus.ssb, mask, value);
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
return bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
#endif
}
return -EINVAL;
}
static inline u32 gpio_intpolarity(u32 mask, u32 value)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
return ssb_gpio_polarity(&bcm47xx_bus.ssb, mask, value);
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
return bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
#endif
}
return -EINVAL;
}
#ifdef CONFIG_BCM47XX_SSB
static inline u32 __ssb_write32_masked(struct ssb_device *dev, u16 offset,
u32 mask, u32 value)
{
value &= mask;
value |= ssb_read32(dev, offset) & ~mask;
ssb_write32(dev, offset, value);
return value;
}
#endif
#ifdef CONFIG_BCM47XX_BCMA
static inline u32 __bcma_write32_masked(struct bcma_device *dev, u16 offset,
u32 mask, u32 value)
{
value &= mask;
value |= bcma_read32(dev, offset) & ~mask;
bcma_write32(dev, offset, value);
return value;
}
#endif
static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *))
{
int irq;
irq = gpio_to_irq(0);
if (irq == -EINVAL) return;
if (enabled) {
if (request_irq(irq, handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, "gpio", handler))
return;
} else {
free_irq(irq, handler);
}
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
if (bcm47xx_bus.ssb.chipco.dev)
__ssb_write32_masked(bcm47xx_bus.ssb.chipco.dev, SSB_CHIPCO_IRQMASK, SSB_CHIPCO_IRQ_GPIO, (enabled ? SSB_CHIPCO_IRQ_GPIO : 0));
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
if (bcm47xx_bus.bcma.bus.drv_cc.core)
__bcma_write32_masked(bcm47xx_bus.bcma.bus.drv_cc.core, BCMA_CC_IRQMASK, BCMA_CC_IRQ_GPIO, (enabled ? BCMA_CC_IRQ_GPIO : 0));
break;
#endif
}
}
#define EXTIF_ADDR 0x1f000000 #define EXTIF_ADDR 0x1f000000
#define EXTIF_UART (EXTIF_ADDR + 0x00800000) #define EXTIF_UART (EXTIF_ADDR + 0x00800000)
@ -157,13 +13,4 @@ static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *))
#define GPIO_TYPE_EXTIF (0x1 << 24) #define GPIO_TYPE_EXTIF (0x1 << 24)
#define GPIO_TYPE_MASK (0xf << 24) #define GPIO_TYPE_MASK (0xf << 24)
static inline void gpio_set_extif(int gpio, int value)
{
volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (gpio & ~GPIO_TYPE_MASK);
if (value)
*addr = 0xFF;
else
*addr;
}
#endif /* __DIAG_GPIO_H */ #endif /* __DIAG_GPIO_H */

View file

@ -1,55 +0,0 @@
#ifndef __SWITCH_GPIO_H
#define __SWITCH_GPIO_H
#include <linux/ssb/ssb_embedded.h>
#include <linux/bcma/bcma_driver_chipcommon.h>
#include <bcm47xx.h>
static inline u32 gpio_in(void)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
return ssb_gpio_in(&bcm47xx_bus.ssb, ~0);
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc, ~0);
#endif
}
return -EINVAL;
}
static inline u32 gpio_out(u32 mask, u32 value)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
return ssb_gpio_out(&bcm47xx_bus.ssb, mask, value);
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
return bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
#endif
}
return -EINVAL;
}
static inline u32 gpio_outen(u32 mask, u32 value)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
ssb_gpio_outen(&bcm47xx_bus.ssb, mask, value);
return 0;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, mask, value);
return 0;
#endif
}
return -EINVAL;
}
#endif /* __SWITCH_GPIO_H */

View file

@ -9,16 +9,16 @@
#define __GPIO_H #define __GPIO_H
#ifdef CONFIG_BCM47XX #ifdef CONFIG_BCM47XX
#include "gpio-bcm947xx.h" #include <linux/gpio.h>
#else #else
#warning "Unsupported configuration." #warning "Unsupported configuration."
#define gpio_in() (-1U) #define bcm47xx_gpio_in(mask) (-1U)
#define gpio_out(mask, value) (-1U) #define bcm47xx_gpio_out(mask, value) (-1U)
#define gpio_outen(mask, value) (-1U) #define bcm47xx_gpio_outen(mask, value) (-1U)
#define gpio_control(mask, value) (-1U) #define bcm47xx_gpio_control(mask, value) (-1U)
#define gpio_intmask(mask, value) (-1U) #define bcm47xx_gpio_intmask(mask, value) (-1U)
#define gpio_intpolarity(mask, value) (-1U) #define bcm47xx_gpio_polarity(mask, value) (-1U)
#endif #endif

View file

@ -104,7 +104,7 @@ static void adm_write(int cs, char *buf, unsigned int bits)
int i, len = (bits + 7) / 8; int i, len = (bits + 7) / 8;
__u8 mask; __u8 mask;
gpio_out(eecs, (cs ? eecs : 0)); bcm47xx_gpio_out(eecs, (cs ? eecs : 0));
udelay(EECK_EDGE_TIME); udelay(EECK_EDGE_TIME);
/* Byte assemble from MSB to LSB */ /* Byte assemble from MSB to LSB */
@ -112,25 +112,25 @@ static void adm_write(int cs, char *buf, unsigned int bits)
/* Bit bang from MSB to LSB */ /* Bit bang from MSB to LSB */
for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) { for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) {
/* Clock low */ /* Clock low */
gpio_out(eesk, 0); bcm47xx_gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME); udelay(EECK_EDGE_TIME);
/* Output on rising edge */ /* Output on rising edge */
gpio_out(eedi, ((mask & buf[i]) ? eedi : 0)); bcm47xx_gpio_out(eedi, ((mask & buf[i]) ? eedi : 0));
udelay(EEDI_SETUP_TIME); udelay(EEDI_SETUP_TIME);
/* Clock high */ /* Clock high */
gpio_out(eesk, eesk); bcm47xx_gpio_out(eesk, eesk);
udelay(EECK_EDGE_TIME); udelay(EECK_EDGE_TIME);
} }
} }
/* Clock low */ /* Clock low */
gpio_out(eesk, 0); bcm47xx_gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME); udelay(EECK_EDGE_TIME);
if (cs) if (cs)
gpio_out(eecs, 0); bcm47xx_gpio_out(eecs, 0);
} }
@ -139,7 +139,7 @@ static void adm_read(int cs, char *buf, unsigned int bits)
int i, len = (bits + 7) / 8; int i, len = (bits + 7) / 8;
__u8 mask; __u8 mask;
gpio_out(eecs, (cs ? eecs : 0)); bcm47xx_gpio_out(eecs, (cs ? eecs : 0));
udelay(EECK_EDGE_TIME); udelay(EECK_EDGE_TIME);
/* Byte assemble from MSB to LSB */ /* Byte assemble from MSB to LSB */
@ -151,16 +151,16 @@ static void adm_read(int cs, char *buf, unsigned int bits)
__u8 gp; __u8 gp;
/* Clock low */ /* Clock low */
gpio_out(eesk, 0); bcm47xx_gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME); udelay(EECK_EDGE_TIME);
/* Input on rising edge */ /* Input on rising edge */
gp = gpio_in(); gp = bcm47xx_gpio_in(~0);
if (gp & eedi) if (gp & eedi)
byte |= mask; byte |= mask;
/* Clock high */ /* Clock high */
gpio_out(eesk, eesk); bcm47xx_gpio_out(eesk, eesk);
udelay(EECK_EDGE_TIME); udelay(EECK_EDGE_TIME);
} }
@ -168,11 +168,11 @@ static void adm_read(int cs, char *buf, unsigned int bits)
} }
/* Clock low */ /* Clock low */
gpio_out(eesk, 0); bcm47xx_gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME); udelay(EECK_EDGE_TIME);
if (cs) if (cs)
gpio_out(eecs, 0); bcm47xx_gpio_out(eecs, 0);
} }
@ -180,10 +180,10 @@ static void adm_read(int cs, char *buf, unsigned int bits)
static void adm_enout(__u8 pins, __u8 val) static void adm_enout(__u8 pins, __u8 val)
{ {
/* Prepare GPIO output value */ /* Prepare GPIO output value */
gpio_out(pins, val); bcm47xx_gpio_out(pins, val);
/* Enable GPIO outputs */ /* Enable GPIO outputs */
gpio_outen(pins, pins); bcm47xx_gpio_outen(pins, pins);
udelay(EECK_EDGE_TIME); udelay(EECK_EDGE_TIME);
} }
@ -192,7 +192,7 @@ static void adm_enout(__u8 pins, __u8 val)
static void adm_disout(__u8 pins) static void adm_disout(__u8 pins)
{ {
/* Disable GPIO outputs */ /* Disable GPIO outputs */
gpio_outen(pins, 0); bcm47xx_gpio_outen(pins, 0);
udelay(EECK_EDGE_TIME); udelay(EECK_EDGE_TIME);
} }
@ -203,11 +203,11 @@ static void adm_adclk(int clocks)
int i; int i;
for (i = 0; i < clocks; i++) { for (i = 0; i < clocks; i++) {
/* Clock high */ /* Clock high */
gpio_out(eesk, eesk); bcm47xx_gpio_out(eesk, eesk);
udelay(EECK_EDGE_TIME); udelay(EECK_EDGE_TIME);
/* Clock low */ /* Clock low */
gpio_out(eesk, 0); bcm47xx_gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME); udelay(EECK_EDGE_TIME);
} }
} }

View file

@ -1,6 +1,7 @@
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ARPD is not set # CONFIG_ARPD is not set
CONFIG_B44=y CONFIG_B44=y
@ -15,6 +16,7 @@ CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_DEBUG=y CONFIG_BCMA_DEBUG=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DRIVER_MIPS=y CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
CONFIG_BCMA_HOST_PCI=y CONFIG_BCMA_HOST_PCI=y
@ -50,6 +52,8 @@ CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_PCI_IOMAP=y
# CONFIG_GENERIC_PWM is not set
CONFIG_GPIOLIB=y
CONFIG_HARDWARE_WATCHPOINTS=y CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y CONFIG_HAS_IOMEM=y

View file

@ -1,47 +0,0 @@
From f6e41db3ee7ead99e1398def222c14893fc265de Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Thu, 4 Aug 2011 21:09:48 +0200
Subject: [PATCH 26/26] bcma: export needed gpio functions
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/bcma/driver_chipcommon.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -81,16 +81,19 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
{
return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_in);
u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
@@ -102,11 +105,13 @@ u32 bcma_chipco_gpio_intmask(struct bcma
{
return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_intmask);
u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_polarity);
#ifdef CONFIG_BCMA_DRIVER_MIPS
void bcma_chipco_serial_init(struct bcma_drv_cc *cc)

View file

@ -1,12 +0,0 @@
--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
@@ -151,5 +151,9 @@ static inline int gpio_polarity(unsigned
return -EINVAL;
}
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+ return -ENOSYS;
+}
#endif /* __BCM47XX_GPIO_H */

View file

@ -1,51 +0,0 @@
--- a/arch/mips/bcm47xx/gpio.c
+++ b/arch/mips/bcm47xx/gpio.c
@@ -7,6 +7,7 @@
*/
#include <linux/export.h>
+#include <linux/gpio.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_driver_chipcommon.h>
#include <linux/ssb/ssb_driver_extif.h>
@@ -100,3 +101,30 @@ int gpio_to_irq(unsigned gpio)
return -EINVAL;
}
EXPORT_SYMBOL_GPL(gpio_to_irq);
+
+/**
+ * gpio_request_one - request a single GPIO with initial configuration
+ * @gpio: the GPIO number
+ * @flags: GPIO configuration as specified by GPIOF_*
+ * @label: a literal description string of this GPIO
+ */
+int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+{
+ int err;
+
+ err = gpio_request(gpio, label);
+ if (err)
+ return err;
+
+ if (flags & GPIOF_DIR_IN)
+ err = gpio_direction_input(gpio);
+ else
+ err = gpio_direction_output(gpio,
+ (flags & GPIOF_INIT_HIGH) ? 1 : 0);
+
+ if (err)
+ gpio_free(gpio);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(gpio_request_one);
--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
@@ -19,6 +19,7 @@
extern int gpio_request(unsigned gpio, const char *label);
extern void gpio_free(unsigned gpio);
extern int gpio_to_irq(unsigned gpio);
+extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
static inline int gpio_get_value(unsigned gpio)
{

View file

@ -0,0 +1,40 @@
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -136,6 +136,18 @@ u32 ssb_gpio_polarity(struct ssb_bus *bu
}
EXPORT_SYMBOL(ssb_gpio_polarity);
+int ssb_gpio_count(struct ssb_bus *bus)
+{
+ if (ssb_chipco_available(&bus->chipco))
+ return SSB_GPIO_CHIPCO_LINES;
+ else if (ssb_extif_available(&bus->extif))
+ return SSB_GPIO_EXTIF_LINES;
+ else
+ SSB_WARN_ON(1);
+ return 0;
+}
+EXPORT_SYMBOL(ssb_gpio_count);
+
#ifdef CONFIG_SSB_DRIVER_GIGE
static int gige_pci_init_callback(struct ssb_bus *bus, unsigned long data)
{
--- a/include/linux/ssb/ssb_embedded.h
+++ b/include/linux/ssb/ssb_embedded.h
@@ -7,6 +7,9 @@
extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks);
+#define SSB_GPIO_EXTIF_LINES 5
+#define SSB_GPIO_CHIPCO_LINES 16
+
/* Generic GPIO API */
u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask);
u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value);
@@ -14,5 +17,6 @@ u32 ssb_gpio_outen(struct ssb_bus *bus,
u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value);
u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value);
u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value);
+int ssb_gpio_count(struct ssb_bus *bus);
#endif /* LINUX_SSB_EMBEDDED_H_ */

View file

@ -0,0 +1,170 @@
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -39,6 +39,11 @@ config BCMA_HOST_SOC
depends on BCMA_DRIVER_MIPS
select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
+config BCMA_DRIVER_GPIO
+ bool
+ depends on BCMA_DRIVER_MIPS
+ default y
+
config BCMA_SFLASH
bool
depends on BCMA_DRIVER_MIPS
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
@@ -6,6 +6,7 @@ bcma-y += driver_pci.o
bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
+bcma-$(CONFIG_BCMA_DRIVER_GPIO) += driver_gpio.o
bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
obj-$(CONFIG_BCMA) += bcma.o
--- /dev/null
+++ b/drivers/bcma/driver_gpio.c
@@ -0,0 +1,96 @@
+/*
+ * Broadcom specific AMBA
+ * GPIO driver for SoCs
+ *
+ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/export.h>
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_driver_gpio.h>
+
+u32 bcma_gpio_in(struct bcma_bus *bus, u32 mask)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ res = bcma_chipco_gpio_in(&bus->drv_cc, mask);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(bcma_gpio_in);
+
+u32 bcma_gpio_out(struct bcma_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ res = bcma_chipco_gpio_out(&bus->drv_cc, mask, value);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(bcma_gpio_out);
+
+u32 bcma_gpio_outen(struct bcma_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ res = bcma_chipco_gpio_outen(&bus->drv_cc, mask, value);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(bcma_gpio_outen);
+
+u32 bcma_gpio_control(struct bcma_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ res = bcma_chipco_gpio_control(&bus->drv_cc, mask, value);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(bcma_gpio_control);
+
+u32 bcma_gpio_intmask(struct bcma_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ res = bcma_chipco_gpio_intmask(&bus->drv_cc, mask, value);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(bcma_gpio_intmask);
+
+u32 bcma_gpio_polarity(struct bcma_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ res = bcma_chipco_gpio_polarity(&bus->drv_cc, mask, value);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(bcma_gpio_polarity);
+
+int bcma_gpio_count(struct bcma_bus *bus)
+{
+ return BCMA_GPIO_CC_LINES;
+}
+EXPORT_SYMBOL(bcma_gpio_count);
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -422,6 +422,10 @@ void bcma_init_bus(struct bcma_bus *bus)
if (bus->init_done)
return;
+#ifdef CONFIG_BCMA_DRIVER_GPIO
+ spin_lock_init(&bus->gpio_lock);
+#endif
+
INIT_LIST_HEAD(&bus->cores);
bus->nr_cores = 0;
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -255,6 +255,11 @@ struct bcma_bus {
struct bcma_drv_mips drv_mips;
struct bcma_drv_gmac_cmn drv_gmac_cmn;
+#ifdef CONFIG_BCMA_DRIVER_GPIO
+ /* Lock for GPIO register access. */
+ spinlock_t gpio_lock;
+#endif /* CONFIG_BCMA_DRIVER_GPIO */
+
/* We decided to share SPROM struct with SSB as long as we do not need
* any hacks for BCMA. This simplifies drivers code. */
struct ssb_sprom sprom;
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_gpio.h
@@ -0,0 +1,17 @@
+#ifndef LINUX_BCMA_DRIVER_GPIO_H_
+#define LINUX_BCMA_DRIVER_GPIO_H_
+
+#include <linux/types.h>
+#include <linux/bcma/bcma.h>
+
+#define BCMA_GPIO_CC_LINES 16
+
+u32 bcma_gpio_in(struct bcma_bus *bus, u32 mask);
+u32 bcma_gpio_out(struct bcma_bus *bus, u32 mask, u32 value);
+u32 bcma_gpio_outen(struct bcma_bus *bus, u32 mask, u32 value);
+u32 bcma_gpio_control(struct bcma_bus *bus, u32 mask, u32 value);
+u32 bcma_gpio_intmask(struct bcma_bus *bus, u32 mask, u32 value);
+u32 bcma_gpio_polarity(struct bcma_bus *bus, u32 mask, u32 value);
+int bcma_gpio_count(struct bcma_bus *bus);
+
+#endif /* LINUX_BCMA_DRIVER_GPIO_H_ */

View file

@ -0,0 +1,490 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -92,6 +92,7 @@ config ATH79
config BCM47XX
bool "Broadcom BCM47XX based boards"
+ select ARCH_REQUIRE_GPIOLIB
select BOOT_RAW
select CEVT_R4K
select CSRC_R4K
@@ -100,7 +101,6 @@ config BCM47XX
select IRQ_CPU
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_GPIO
select CFE
help
Support for BCM47XX based boards
--- a/arch/mips/bcm47xx/gpio.c
+++ b/arch/mips/bcm47xx/gpio.c
@@ -4,81 +4,198 @@
* for more details.
*
* Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Parts of this file are based on Atheros AR71XX/AR724X/AR913X GPIO
*/
#include <linux/export.h>
+#include <linux/gpio.h>
#include <linux/ssb/ssb.h>
-#include <linux/ssb/ssb_driver_chipcommon.h>
-#include <linux/ssb/ssb_driver_extif.h>
-#include <asm/mach-bcm47xx/bcm47xx.h>
-#include <asm/mach-bcm47xx/gpio.h>
+#include <linux/ssb/ssb_embedded.h>
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_driver_gpio.h>
+
+#include <bcm47xx.h>
-#if (BCM47XX_CHIPCO_GPIO_LINES > BCM47XX_EXTIF_GPIO_LINES)
-static DECLARE_BITMAP(gpio_in_use, BCM47XX_CHIPCO_GPIO_LINES);
-#else
-static DECLARE_BITMAP(gpio_in_use, BCM47XX_EXTIF_GPIO_LINES);
-#endif
-int gpio_request(unsigned gpio, const char *tag)
+static unsigned long bcm47xx_gpio_count;
+
+/* low level BCM47xx gpio api */
+u32 bcm47xx_gpio_in(u32 mask)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
- if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
- return -EINVAL;
-
- if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
- return -EINVAL;
+ return ssb_gpio_in(&bcm47xx_bus.ssb, mask);
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ return bcma_gpio_in(&bcm47xx_bus.bcma.bus, mask);
+#endif
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(bcm47xx_gpio_in);
- if (test_and_set_bit(gpio, gpio_in_use))
- return -EBUSY;
+u32 bcm47xx_gpio_out(u32 mask, u32 value)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_gpio_out(&bcm47xx_bus.ssb, mask, value);
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ return bcma_gpio_out(&bcm47xx_bus.bcma.bus, mask, value);
+#endif
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(bcm47xx_gpio_out);
- return 0;
+u32 bcm47xx_gpio_outen(u32 mask, u32 value)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_gpio_outen(&bcm47xx_bus.ssb, mask, value);
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
- if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
- return -EINVAL;
+ return bcma_gpio_outen(&bcm47xx_bus.bcma.bus, mask, value);
+#endif
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(bcm47xx_gpio_outen);
- if (test_and_set_bit(gpio, gpio_in_use))
- return -EBUSY;
+u32 bcm47xx_gpio_control(u32 mask, u32 value)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_gpio_control(&bcm47xx_bus.ssb, mask, value);
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ return bcma_gpio_control(&bcm47xx_bus.bcma.bus, mask, value);
+#endif
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(bcm47xx_gpio_control);
- return 0;
+u32 bcm47xx_gpio_intmask(u32 mask, u32 value)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ return ssb_gpio_intmask(&bcm47xx_bus.ssb, mask, value);
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ return bcma_gpio_intmask(&bcm47xx_bus.bcma.bus, mask, value);
#endif
}
return -EINVAL;
}
-EXPORT_SYMBOL(gpio_request);
+EXPORT_SYMBOL(bcm47xx_gpio_intmask);
-void gpio_free(unsigned gpio)
+u32 bcm47xx_gpio_polarity(u32 mask, u32 value)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
- if (ssb_chipco_available(&bcm47xx_bus.ssb.chipco) &&
- ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
- return;
+ return ssb_gpio_polarity(&bcm47xx_bus.ssb, mask, value);
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ return bcma_gpio_polarity(&bcm47xx_bus.bcma.bus, mask, value);
+#endif
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(bcm47xx_gpio_polarity);
+
+
+
+static int bcm47xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ return bcm47xx_gpio_in(1 << gpio);
+}
+
+static void bcm47xx_gpio_set_value(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ bcm47xx_gpio_out(1 << gpio, value ? 1 << gpio : 0);
+}
+
+static int bcm47xx_gpio_direction_input(struct gpio_chip *chip,
+ unsigned gpio)
+{
+ bcm47xx_gpio_outen(1 << gpio, 0);
+ return 0;
+}
+
+static int bcm47xx_gpio_direction_output(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ /* first set the gpio out value */
+ bcm47xx_gpio_out(1 << gpio, value ? 1 << gpio : 0);
+ /* then set the gpio mode */
+ bcm47xx_gpio_outen(1 << gpio, 1 << gpio);
+ return 0;
+}
+
+static struct gpio_chip bcm47xx_gpio_chip = {
+ .label = "bcm47xx",
+ .get = bcm47xx_gpio_get_value,
+ .set = bcm47xx_gpio_set_value,
+ .direction_input = bcm47xx_gpio_direction_input,
+ .direction_output = bcm47xx_gpio_direction_output,
+ .base = 0,
+};
- if (ssb_extif_available(&bcm47xx_bus.ssb.extif) &&
- ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
- return;
+void __init bcm47xx_gpio_init(void)
+{
+ int err;
- clear_bit(gpio, gpio_in_use);
- return;
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ bcm47xx_gpio_count = ssb_gpio_count(&bcm47xx_bus.ssb);
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
- if (gpio >= BCM47XX_CHIPCO_GPIO_LINES)
- return;
-
- clear_bit(gpio, gpio_in_use);
- return;
+ bcm47xx_gpio_count = bcma_gpio_count(&bcm47xx_bus.bcma.bus);
#endif
}
+
+ bcm47xx_gpio_chip.ngpio = bcm47xx_gpio_count;
+
+ err = gpiochip_add(&bcm47xx_gpio_chip);
+ if (err)
+ panic("cannot add BCM47xx GPIO chip, error=%d", err);
}
-EXPORT_SYMBOL(gpio_free);
+
+int gpio_get_value(unsigned gpio)
+{
+ if (gpio < bcm47xx_gpio_count)
+ return bcm47xx_gpio_in(1 << gpio);
+
+ return __gpio_get_value(gpio);
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+void gpio_set_value(unsigned gpio, int value)
+{
+ if (gpio < bcm47xx_gpio_count)
+ bcm47xx_gpio_out(1 << gpio, value ? 1 << gpio : 0);
+ else
+ __gpio_set_value(gpio, value);
+}
+EXPORT_SYMBOL(gpio_set_value);
int gpio_to_irq(unsigned gpio)
{
@@ -99,4 +216,11 @@ int gpio_to_irq(unsigned gpio)
}
return -EINVAL;
}
-EXPORT_SYMBOL_GPL(gpio_to_irq);
+EXPORT_SYMBOL(gpio_to_irq);
+
+int irq_to_gpio(unsigned irq)
+{
+ /* FIXME */
+ return -EINVAL;
+}
+EXPORT_SYMBOL(irq_to_gpio);
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -344,6 +344,8 @@ void __init plat_mem_setup(void)
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
+
+ bcm47xx_gpio_init();
}
static int __init bcm47xx_register_bus_complete(void)
--- a/arch/mips/bcm47xx/wgt634u.c
+++ b/arch/mips/bcm47xx/wgt634u.c
@@ -133,6 +133,7 @@ static int __init wgt634u_init(void)
* been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
*/
u8 *et0mac;
+ int err;
if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
return -ENODEV;
@@ -146,6 +147,12 @@ static int __init wgt634u_init(void)
printk(KERN_INFO "WGT634U machine detected.\n");
+ err = gpio_request(WGT634U_GPIO_RESET, "reset-buton");
+ if (err) {
+ printk(KERN_INFO "Can not register gpio fir reset button\n");
+ return 0;
+ }
+
if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
gpio_interrupt, IRQF_SHARED,
"WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -56,4 +56,6 @@ void bcm47xx_fill_bcma_boardinfo(struct
const char *prefix);
#endif
+void bcm47xx_gpio_init(void);
+
#endif /* __ASM_BCM47XX_H */
--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
@@ -4,152 +4,39 @@
* for more details.
*
* Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
*/
#ifndef __BCM47XX_GPIO_H
#define __BCM47XX_GPIO_H
-#include <linux/ssb/ssb_embedded.h>
-#include <linux/bcma/bcma.h>
-#include <asm/mach-bcm47xx/bcm47xx.h>
-
-#define BCM47XX_EXTIF_GPIO_LINES 5
-#define BCM47XX_CHIPCO_GPIO_LINES 16
-
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
-extern int gpio_to_irq(unsigned gpio);
+#define ARCH_NR_GPIOS 64
+#include <asm-generic/gpio.h>
-static inline int gpio_get_value(unsigned gpio)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc,
- 1 << gpio);
-#endif
- }
- return -EINVAL;
-}
-
-#define gpio_get_value_cansleep gpio_get_value
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
- value ? 1 << gpio : 0);
- return;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
- value ? 1 << gpio : 0);
- return;
-#endif
- }
-}
-
-#define gpio_set_value_cansleep gpio_set_value
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return 0;
-}
+/* low level BCM47xx gpio api */
+u32 bcm47xx_gpio_in(u32 mask);
+u32 bcm47xx_gpio_out(u32 mask, u32 value);
+u32 bcm47xx_gpio_outen(u32 mask, u32 value);
+u32 bcm47xx_gpio_control(u32 mask, u32 value);
+u32 bcm47xx_gpio_intmask(u32 mask, u32 value);
+u32 bcm47xx_gpio_polarity(u32 mask, u32 value);
-static inline int gpio_is_valid(unsigned gpio)
-{
- return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES);
-}
+int gpio_to_irq(unsigned gpio);
+int irq_to_gpio(unsigned irq);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
-
-static inline int gpio_direction_input(unsigned gpio)
+static inline void gpio_intmask(unsigned gpio, int value)
{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
- return 0;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
- 0);
- return 0;
-#endif
- }
- return -EINVAL;
+ bcm47xx_gpio_intmask(1 << gpio, value ? 1 << gpio : 0);
}
-static inline int gpio_direction_output(unsigned gpio, int value)
+static inline void gpio_polarity(unsigned gpio, int value)
{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- /* first set the gpio out value */
- ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
- value ? 1 << gpio : 0);
- /* then set the gpio mode */
- ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
- return 0;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- /* first set the gpio out value */
- bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
- value ? 1 << gpio : 0);
- /* then set the gpio mode */
- bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, 1 << gpio,
- 1 << gpio);
- return 0;
-#endif
- }
- return -EINVAL;
+ bcm47xx_gpio_polarity(1 << gpio, value ? 1 << gpio : 0);
}
-static inline int gpio_intmask(unsigned gpio, int value)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
- value ? 1 << gpio : 0);
- return 0;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc,
- 1 << gpio, value ? 1 << gpio : 0);
- return 0;
-#endif
- }
- return -EINVAL;
-}
-
-static inline int gpio_polarity(unsigned gpio, int value)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
- value ? 1 << gpio : 0);
- return 0;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc,
- 1 << gpio, value ? 1 << gpio : 0);
- return 0;
-#endif
- }
- return -EINVAL;
-}
+#define gpio_cansleep __gpio_cansleep
#endif /* __BCM47XX_GPIO_H */

View file

@ -7,7 +7,7 @@
-obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o -obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
--- a/arch/mips/bcm47xx/wgt634u.c --- a/arch/mips/bcm47xx/wgt634u.c
+++ /dev/null +++ /dev/null
@@ -1,170 +0,0 @@ @@ -1,177 +0,0 @@
-/* -/*
- * This file is subject to the terms and conditions of the GNU General Public - * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive - * License. See the file "COPYING" in the main directory of this archive
@ -143,6 +143,7 @@
- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx. - * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
- */ - */
- u8 *et0mac; - u8 *et0mac;
- int err;
- -
- if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB) - if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
- return -ENODEV; - return -ENODEV;
@ -156,6 +157,12 @@
- -
- printk(KERN_INFO "WGT634U machine detected.\n"); - printk(KERN_INFO "WGT634U machine detected.\n");
- -
- err = gpio_request(WGT634U_GPIO_RESET, "reset-buton");
- if (err) {
- printk(KERN_INFO "Can not register gpio fir reset button\n");
- return 0;
- }
-
- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET), - if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
- gpio_interrupt, IRQF_SHARED, - gpio_interrupt, IRQF_SHARED,
- "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) { - "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {