ramips: add support for Zbtlink WA05 router

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41579
This commit is contained in:
John Crispin 2014-07-10 22:02:28 +00:00
parent f88fde9689
commit 03faf4618e
6 changed files with 126 additions and 2 deletions

View file

@ -181,6 +181,11 @@ case $board in
ucidef_set_led_default "power" "power" "buffalo:green:power" "1"
ucidef_set_led_default "router" "router" "buffalo:green:router" "1"
;;
zbt-wa05)
ucidef_set_led_default "power" "power" "zbtlink:blue:power" "1"
set_wifi_led "zbtlink:blue:air"
set_usb_led "zbtlink:blue:usb"
;;
esac
ucidef_commit_leds

View file

@ -112,7 +112,8 @@ ramips_setup_interfaces()
hg255d | \
rt-n14u | \
wrtnode | \
ur-326n4g)
ur-326n4g | \
zbt-wa05)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"

View file

@ -307,6 +307,9 @@ ramips_board_detect() {
*"Sercomm NA930")
name="na930"
;;
*"Zbtlink ZBT-WA05")
name="zbt-wa05"
;;
*)
name="generic"
;;

View file

@ -91,7 +91,8 @@ platform_check_image() {
wmr300 |\
wrtnode |\
x5 |\
x8)
x8 |\
zbt-wa05)
[ "$magic" != "27051956" ] && {
echo "Invalid image type."
return 1

View file

@ -0,0 +1,112 @@
/dts-v1/;
/include/ "mt7620n.dtsi"
/ {
compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
model = "Zbtlink ZBT-WA05";
chosen {
bootargs = "console=ttyS0,115200";
};
palmbus@10000000 {
gpio1: gpio@638 {
status = "okay";
};
gpio2: gpio@660 {
status = "okay";
};
gpio3: gpio@688 {
status = "okay";
};
spi@b00 {
status = "okay";
en25q64@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25q64";
reg = <0 0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x760000>;
};
};
};
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
ralink,port-map = "llllw";
};
pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "i2c", "spi refclk", "wled";
ralink,function = "gpio";
};
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "zbtlink:blue:power";
gpios = <&gpio1 14 1>;
};
usb {
label = "zbtlink:blue:usb";
gpios = <&gpio1 15 0>;
};
air {
label = "zbtlink:blue:air";
gpios = <&gpio3 0 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
};
};

View file

@ -738,12 +738,14 @@ endif
Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
ifeq ($(SUBTARGET),mt7620n)
define Image/Build/Profile/Default
$(call Image/Build/Profile/WMR300,$(1))
$(call Image/Build/Profile/RT-N14U,$(1))
$(call Image/Build/Profile/WRTNODE,$(1))
$(call Image/Build/Profile/ZBT-WA05,$(1))
endef
endif