Rename mipsIRQ.S to int-handler to match the kernel naming convention, implement basic board detection, rewrite usb HCD driver (to be tested)

SVN-Revision: 6893
This commit is contained in:
Florian Fainelli 2007-04-08 10:15:17 +00:00
parent c39de67e80
commit 01e84cef1a
5 changed files with 137 additions and 54 deletions

View file

@ -7,6 +7,10 @@ CONFIG_BASE_SMALL=0
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BINFMT_MISC=m
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIUSB is not set
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_STATS2=y
@ -225,6 +229,7 @@ CONFIG_SERIO_SERPORT=y
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SND_USB_AUDIO is not set
CONFIG_SOFT_WATCHDOG=m
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SYN_COOKIES=y
@ -238,5 +243,23 @@ CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_TRAD_SIGNALS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_USB is not set
CONFIG_USB=y
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_ADM5120_HCD=y
# CONFIG_USB_ATM is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_ZD1211RW is not set

View file

@ -2,6 +2,6 @@
# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
#
obj-y := setup.o prom.o irq.o memory.o mipsIRQ.o adm5120_info.o
obj-y := setup.o prom.o irq.o memory.o int-handler.o adm5120_info.o
EXTRA_AFLAGS := $(CFLAGS)

View file

@ -162,7 +162,16 @@ static int __init detect_bootloader(void)
*/
static void __init detect_board_type(void)
{
/* FIXME: not yet implemented */
switch(adm5120_info.boot_loader) {
case BOOT_LOADER_CFE:
adm5120_info.board_type = BOARD_TYPE_WP54G_WRT;
adm5120_info.iface_num = 2;
adm5120_info.has_usb = 0;
printk("Board is a Compex WP54G-WRT\n");
default:
adm5120_info.board_type = BOARD_TYPE_UNKNOWN;
printk("Board type is unknown\n");
}
}
void __init adm5120_info_show(void)

View file

@ -8,14 +8,22 @@
* Which again was based on the ohci and uhci drivers.
*/
#include <linux/autoconf.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/usb.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/byteorder.h>
#include <asm/mach-adm5120/adm5120_info.h>
#include "../core/hcd.h"
MODULE_DESCRIPTION("ADM5120 USB Host Controller Driver");
@ -137,13 +145,33 @@ static int admhcd_td_err[16] = {
#define ED(ed) ((struct admhcd_ed *)(((u32)(ed)) & ~0xf))
struct admhcd {
spinlock_t lock;
void __iomem *addr_reg;
void __iomem *data_reg;
/* Root hub registers */
u32 rhdesca;
u32 rhdescb;
u32 rhstatus;
u32 rhport[2];
/* async schedule: control, bulk */
struct list_head async;
u32 base;
u32 dma_en;
spinlock_t lock;
unsigned long flags;
};
#define hcd_to_admhcd(hcd) ((struct admhcd *)(hcd)->hcd_priv)
static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd)
{
return (struct admhcd *)(hcd->hcd_priv);
}
static inline struct usb_hcd *admhcd_to_hcd(struct admhcd *admhcd)
{
return container_of((void *)admhcd, struct usb_hcd, hcd_priv);
}
static char hcd_name[] = "adm5120-hcd";
@ -670,46 +698,69 @@ static struct hc_driver adm5120_hc_driver = {
.hub_control = admhcd_hub_control,
};
#define resource_len(r) (((r)->end - (r)->start) + 1)
static int __init adm5120hcd_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct admhcd *ahcd;
struct usb_device *udev;
int err = 0;
struct resource *addr, *data;
void __iomem *addr_reg;
void __iomem *data_reg;
int irq, err = 0;
if (!request_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start, hcd_name)) {
pr_debug("couldn't request mem\n");
err = -EBUSY;
if (pdev->num_resources < 3) {
err = -ENODEV;
goto out;
}
//hcd = usb_create_hcd(&adm5120_hc_driver, pdev, pdev->bus_id);
data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
irq = platform_get_irq(pdev, 0);
if (!addr || !data || irq < 0) {
err = -ENODEV;
goto out;
}
if (pdev->dev.dma_mask) {
printk(KERN_DEBUG "DMA not supported\n");
err = -EINVAL;
goto out;
}
if (!request_mem_region(addr->start, 2, hcd_name)) {
err = -EBUSY;
goto out;
}
addr_reg = ioremap(addr->start, resource_len(addr));
if (addr_reg == NULL) {
err = -ENOMEM;
goto out_mem;
}
if (!request_mem_region(data->start, 2, hcd_name)) {
err = -EBUSY;
goto out_unmap;
}
data_reg = ioremap(data->start, resource_len(data));
if (data_reg == NULL) {
err = -ENOMEM;
goto out_mem;
}
hcd = usb_create_hcd(&adm5120_hc_driver, &pdev->dev, pdev->dev.bus_id);
if (!hcd)
goto out_mem;
ahcd = hcd_to_admhcd(hcd);
dev_set_drvdata(pdev, ahcd);
hcd->self.controller = pdev;
//hcd->self.bus_name = pdev->bus_id;
hcd->irq = pdev->resource[1].start;
hcd->regs = (void *)pdev->resource[0].start;
hcd->product_desc = hcd_name;
ahcd->base = pdev->resource[0].start;
if (request_irq(pdev->resource[1].start, adm5120hcd_irq, 0, hcd_name,
hcd)) {
pr_debug("couldn't request irq\n");
err = -EBUSY;
goto out_hcd;
}
//err = usb_register_bus(&hcd->self);
//if (err < 0)
// goto out_irq;
ahcd->data_reg = data_reg;
ahcd->addr_reg = addr_reg;
spin_lock_init(&ahcd->lock);
INIT_LIST_HEAD(&ahcd->async);
/* Initialise the HCD registers */
admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0);
mdelay(10);
admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET);
@ -727,41 +778,39 @@ static int __init adm5120hcd_probe(struct platform_device *pdev)
admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, ADMHCD_NPS | ADMHCD_LPSC);
admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
udev = usb_alloc_dev(NULL, &hcd->self, 0);
if (!udev) {
err = -ENOMEM;
goto out_bus;
}
udev->speed = USB_SPEED_FULL;
hcd->state = HC_STATE_RUNNING;
//err = hcd_register_root(udev, hcd);
//if (err != 0) {
// usb_put_dev(udev);
// goto out_dev;
//}
err = usb_add_hcd(hcd, irq, IRQF_DISABLED);
if (err)
goto out_dev;
return 0;
out_dev:
usb_put_dev(udev);
out_bus:
//usb_deregister_bus(&hcd->self);
usb_put_hcd(hcd);
out_irq:
free_irq(pdev->resource[1].start, hcd);
out_unmap:
iounmap(addr_reg);
out_hcd:
usb_put_hcd(hcd);
out_mem:
release_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start);
release_mem_region(addr->start, 2);
out:
return err;
}
static int __init_or_module adm5120hcd_remove(struct platform_device *pdev)
{
device_init_wakeup(&pdev->dev, 0);
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct admhcd *ahcd;
struct resource *res;
if (!hcd)
return 0;
ahcd = hcd_to_admhcd(hcd);
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
return 0;
}
static struct platform_driver adm5120hcd_driver = {
@ -777,6 +826,8 @@ static int __init adm5120hcd_init(void)
{
if (usb_disabled())
return -ENODEV;
if (!adm5120_info.has_usb)
return -ENODEV;
return platform_driver_register(&adm5120hcd_driver);
}