openwrtv4/target/linux/ramips/dts/FONERA20N.dts

138 lines
2.2 KiB
Text
Raw Normal View History

/dts-v1/;
#include "rt3050.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "fon,fonera20n", "ralink,rt3052-soc";
model = "La Fonera 2.0N";
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
gpio-leds {
compatible = "gpio-leds";
wifi {
label = "fonera20n:orange:wifi";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
power {
label = "fonera20n:green:power";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
usb {
label = "fonera20n:orange:usb";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
switch {
label = "switch";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&esw {
mediatek,portmap = <0x2f>;
port@0 {
compatible = "swconfig,port";
swconfig,segment = "lan";
swconfig,portmap = <0 4>;
};
port@1 {
compatible = "swconfig,port";
swconfig,segment = "lan";
swconfig,portmap = <1 3>;
};
port@2 {
compatible = "swconfig,port";
swconfig,segment = "lan";
swconfig,portmap = <2 2>;
};
port@3 {
compatible = "swconfig,port";
swconfig,segment = "lan";
swconfig,portmap = <3 1>;
};
port@4 {
compatible = "swconfig,port";
swconfig,segment = "wan";
swconfig,portmap = <4 0>;
};
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&otg {
status = "okay";
};